dmesg - decompressors
Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.61+ (matson@ubt) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP PREEMPT Sat Oct 26 13:08:57 CST 2013
CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun7i
Memory cut off:
MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
Ignoring unrecognised tag 0x00000000
Memory Reserved:
SYS : 0x43000000 - 0x4300ffff ( 64 kB)
VE : 0x44000000 - 0x48ffffff ( 80 MB)
G2D : 0x49000000 - 0x49ffffff ( 16 MB)
LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
Memory policy: ECC disabled, Data cache writealloc
sunxi: Allwinner A20 (AW1651/sun7i) detected.
On node 0 totalpages: 507904
free_area_init_node: node 0, pgdat c088e2c0, node_mem_map d0000000
DMA zone: 512 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 65024 pages, LIFO batch:15
Normal zone: 1008 pages used for memmap
Normal zone: 111632 pages, LIFO batch:31
HighMem zone: 2576 pages used for memmap
HighMem zone: 327152 pages, LIFO batch:31
PERCPU: Embedded 7 pages/cpu @d100e000 s7360 r8192 d13120 u32768
pcpu-alloc: s7360 r8192 d13120 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503808
Kernel command line: console=tty0 root=/dev/nandb loglevel=8 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1920x1080p60 rootwait panic=10 rootfstype=ext4 rootflags=discard
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 4194304 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 448MB 1536MB = 1984MB total
Memory: 1869004k/1869004k available, 162612k reserved, 1318912K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc07f3654 (8110 kB)
.init : 0xc07f4000 - 0xc0829cc0 ( 216 kB)
.data : 0xc082a000 - 0xc0894e90 ( 428 kB)
.bss : 0xc0894eb4 - 0xc0a53028 (1785 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
Additional per-CPU info printed with stalls.
NR_IRQS:192
Architected local timer running at 24.00MHz.
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
start_kernel(): bug: interrupts were enabled early
Console: colour dummy device 80x30
console [tty0] enabled
Calibrating delay loop... 1816.98 BogoMIPS (lpj=9084928)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
Setting up static identity map for 0x4057ef30 - 0x4057ef88
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (3640.52 BogoMIPS).
devtmpfs: initialized
dummy:
NET: Registered protocol family 16
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
[ccu-inf] aw clock manager init
[ccu-inf] aw_ccu_init
[ccu-inf] script config pll3 to 297MHz
[ccu-inf] script config pll4 to 300MHz
[ccu-inf] script config pll6 to 600MHz
[ccu-inf] script config pll7 to 297MHz
[ccu-inf] script config pll8 to 336MHz
Init eGon pin module V2.0
bio: create slab at 0
sunxi_gpio driver init ver 1.3
gpiochip_add: registered GPIOs 1 to 2 on device: A1X_GPIO
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource arch_sys_counter
FS-Cache: Loaded
CacheFiles: Loaded
sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pm: select wifi: ap6210
ap6xxx: config 32k clock
[wifi_pm]: wifi gpio init is OK !!
[rfkill]: rfkill set power 0
audit: initializing netlink socket (disabled)
type=2000 audit(0.530:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.18)
msgmni has been set to 1074
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
sunxi disp driver loaded (/dev/disp api 1.0)
[uart]: used uart info.: 0x05
[uart]: serial probe 0 irq 33 mapbase 0x01c28000
sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
console [ttyS0] enabled
[uart]: serial probe 2 irq 35 mapbase 0x01c28800
sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
G2D: drv_g2d_init
G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
G2D: head:c9000000,tail:ca000000
G2D: Module initialized.major:250
brd: module loaded
loop: module loaded
[NAND] nand driver version: 0x2 0x9
Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
Dev Sunxi softw311 nand magic does not match for MBR 2:
Dev Sunxi softw311 nand magic does not match for MBR 3:
Dev Sunxi softw311 nand magic does not match for MBR 4:
Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
Dev Sunxi softw411 nand mbr number does not match for MBR 2: 0
Dev Sunxi softw411 nand header: CRC bad for MBR 2
Dev Sunxi softw411 nand mbr number does not match for MBR 3: 0
Dev Sunxi softw411 nand header: CRC bad for MBR 3
Dev Sunxi softw411 nand mbr number does not match for MBR 4: 0
Dev Sunxi softw411 nand header: CRC bad for MBR 4
Dev Sunxi softw411 nand: part 1, start 32768, size 131072
Dev Sunxi softw411 nand: part 2, start 163840, size 4194304
Dev Sunxi softw411 nand: part 3, start 4358144, size 10682368
nand: nanda nandb nandc
[NAND]nand driver, ok.
sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
scsi0 : sw_ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[sw-ehci1]: open clock
[sw-ehci1]: Set USB Power ON
sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
[sw-ohci1]: open clock
sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
[sw-ehci2]: open clock
[sw-ehci2]: Set USB Power ON
sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
[sw-ohci2]: open clock
sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
mousedev: PS/2 mouse device common for all mice
input: sunxi-ir as /devices/virtual/input/input0
IR Initial OK
===========================hv_keypad_init=====================
========HV Inital ===================
tkey_fetch_sysconfig_para: tkey_unused.
hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0
rtc: get i2c master0 failed
sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
i2c /dev entries driver
config i2c gpio with gpio_config api
axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
[AXP]axp driver uning configuration failed(340)
[AXP]power_start = 0
i2c i2c-0: Invalid probe address 0x00
I2C: i2c-0: AW16XX I2C adapter
[ace_drv] start!!!
[ace_drv] init end!!!
[pa_drv] start!!!
[pa_drv] init end!!!
axp20_ldo1: 1300 mV
axp20_ldo2: 1800 3300 mV at 3000 mV
axp20_ldo3: 700 3500 mV at 2800 mV
axp20_ldo4: 1250 3300 mV at 2800 mV
axp20_buck2: 700 2275 mV at 1450 mV
axp20_buck3: 700 3500 mV at 1300 mV
axp20_ldoio0: 1800 3300 mV at 2800 mV
input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
axp20_ldo2: Failed to create debugfs directory
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.3.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath queue-length: version 0.1.0 loaded
device-mapper: multipath service-time: version 0.2.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
[mmc-msg] sw_mci_init
[mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
[mmc-msg] sdc0 set round clock 400000, src 24000000
[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 Probe: base:0xf00d4000 irq:64 sg_cpu:ffdf7000(4fc00000) ret 0.
[mmc-msg] sdc3 set round clock 400000, src 24000000
[mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc3 Probe: base:0xf00d6000 irq:67 sg_cpu:ffddf000(4fc01000) ret 0.
[mmc_pm]: failed to fetch sdio card configuration!
sunxi_leds driver init
Registered led device: blue:ph21:led1
Registered led device: orange:ph20:led2
Registered led device: white:ph11:led3
Registered led device: green:ph07:led4
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
IPv4 over IPv4 tunneling driver
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: highspeed registered
TCP: hybla registered
TCP: htcp registered
TCP: vegas registered
TCP: veno registered
TCP: scalable registered
TCP: lp registered
TCP: yeah registered
TCP: illinois registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
Registering SWP/SWPB emulation handler
axp20_buck2: Failed to create debugfs directory
[cpu_freq] INF:-------------------V-F Table-------------------
[cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
[cpu_freq] INF: voltage = 1425mv frequency = 912MHz
[cpu_freq] INF: voltage = 1350mv frequency = 864MHz
[cpu_freq] INF: voltage = 1250mv frequency = 720MHz
[cpu_freq] INF: voltage = 1150mv frequency = 528MHz
[cpu_freq] INF: voltage = 1100mv frequency = 312MHz
[cpu_freq] INF: voltage = 1050mv frequency = 144MHz
[cpu_freq] INF: voltage = 1000mv frequency = 0MHz
[cpu_freq] INF:-----------------------------------------------
[cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 720MHz
registered taskstats version 1
I2C: i2c-1: HDMI I2C adapter
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC7DP, max UDMA/100
ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
Timeout waiting for EDID info
disp clks: lcd 148500000 pre_scale 1 hdmi 148500000 pll 297000000 2x 0
Console: switching to colour frame buffer device 240x67
axp20_buck3: incomplete constraints, leaving on
axp20_buck2: incomplete constraints, leaving on
axp20_ldo4: incomplete constraints, leaving on
axp20_ldo3: incomplete constraints, leaving on
axp20_ldo2: incomplete constraints, leaving on
axp20_ldo1: incomplete constraints, leaving on
console [netcon0] enabled
netconsole: network logging started
sunxi-rtc sunxi-rtc: setting system clock to 2013-12-17 19:45:33 UTC (1387309533)
ALSA device list:
#0: sunxi-CODEC Audio Codec
EXT4-fs (nandb): mounted filesystem with ordered data mode. Opts: discard
VFS: Mounted root (ext4 filesystem) on device 93:2.
devtmpfs: mounted
Freeing init memory: 212K
Write protecting the kernel text section c0008000 - c07c7000
init: ureadahead main process (68) terminated with status 5
udevd[151]: starting version 175
pwm-sunxi: pwm0 configured - period: 20, duty_percent: 50, duty: 10
eth%d: device MAC address a2:4e:86:44:fd:80
[gmac]: sun6i_gmac platform driver registration completedUMP: Inserting UMP device driver. Compiled: Oct 26 2013, time: 13:03:48
UMP: Using OS memory backend, allocation limit: 134217728
UMP: UMP device driver loaded
Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x5A000000, size=33554432)
mali: use config clk_div 1
mali: clk_div 1
Mali: mali clock set completed, clock is 312000000 Hz
mali: use config clk_div 1
mali: clk_div 1
init: plymouth main process (69) killed by ABRT signal
Mali: mali clock set completed, clock is 312000000 Hz
init: plymouth-splash main process (215) terminated with status 2
Mali: Mali device driver loaded
bcmdhd: got gpio2, mapped to irqno170
dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON
sdio wifi power state: on
[mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc3 power on
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc3 set round clock 400000, src 24000000
[mmc-err] smc 3 err, cmd 52, RTO
[mmc-err] smc 3 err, cmd 52, RTO
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-err] smc 3 err, cmd 8, RTO
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set round clock 42857143, src 600000000
=========== WLAN placed in POWER ON ========
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
mmc1: new high speed SDIO card at address 0001
Linux Kernel SDIO/MMC Driver
bcmdhd: irq=170, flags=0x00000414
dhdsdio_probe : no mutex held. set lock
F1 signature read @0x18000000=0x1591a962
bcmsdh_config_hw_oob_intr: Enter
DHD: dongle ram size is set to 245760(orig 245760)
dhd_attach, firmware path
wl_create_event_handler thr:128 created
wl_create_event_handler thr:128 started
p2p0: P2P Interface Registered
dhd_attach thr:12c created
dhd_attach thr:12c started
dhd_attach thr:12f created
dhd_attach thr:12f started
dhd_attach thr:131 created
dhd_attach thr:131 started
Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
dhdsdio_probe : the lock is released.
Dongle Host Driver, version 1.28.23.3 (r)
dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to insert WLAN RESET
sdio wifi power state: off
sunxi_gmac: probed
eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
=========== WLAN placed in RESET ========
init: plymouth-log main process (321) terminated with status 1
init: plymouth-upstart-bridge main process (389) terminated with status 1
PHY: sunxi_gmac-0:00 - Link is Up - 1000/Full
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
init: failsafe main process (323) killed by TERM signal
init: plymouth-stop pre-start process (685) terminated with status 1
init: tty1 main process (686) killed by TERM signal
dhd_open, firmware path
Dongle Host Driver, version 1.28.23.3 (r)
wl_android_wifi_on in
dhd_customer_gpio_wlan_ctrl: callc customer specific GPIO to remove WLAN RESET
sdio wifi power state: on
=========== WLAN going back to live ========
sdio_reset_comm():
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set round clock 400000, src 24000000
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set round clock 42857143, src 600000000
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
dhd_bus_devreset: == WLAN ON ==
dhd_bus_devreset called when dongle is not in reset
Will call dhd_bus_start instead
bcmsdh_config_hw_oob_intr: Enter
dhd_bus_select_firmware_name_by_chip: firmware_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
bcmsdh_set_drvdata Enter
bcmsdh_register_oob_intr Enter
bcmsdh_register_oob_intr IRQ=170 Type=414
dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 79
Firmware up: op_mode=0x0002, Broadcom Dongle Host Driver mac=02:1a:11:fb:09:f9
Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
Driver: 1.28.23.3 (r)
Firmware: wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 79
wl_android_wifi_on: Success
wlan0: no IPv6 routers present
wl_android_wifi_off in
bcmsdh_sdmmc: F0 Wr:0x04: write disallowed
bcmsdh_set_irq Flag = 0
dhd_bus_devreset: WLAN OFF DONE
dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to insert WLAN RESET
sdio wifi power state: off
=========== WLAN placed in RESET ========
dhd_open, firmware path /lib/firmware/ap6210/fw_bcmxxxx.bin
dhd_bus_select_firmware_name_by_chip: firmware_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
Dongle Host Driver, version 1.28.23.3 (r)
wl_android_wifi_on in
dhd_customer_gpio_wlan_ctrl: callc customer specific GPIO to remove WLAN RESET
sdio wifi power state: on
=========== WLAN going back to live ========
sdio_reset_comm():
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set round clock 400000, src 24000000
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set round clock 42857143, src 600000000
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
dhd_bus_devreset: == WLAN ON ==
F1 signature read @0x18000000=0x1591a962
bcmsdh_config_hw_oob_intr: Enter
DHD: dongle ram size is set to 245760(orig 245760)
dhd_bus_select_firmware_name_by_chip: firmware_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
bcmsdh_set_irq Flag = 1
dhd_bus_devreset: WLAN ON DONE
Firmware up: op_mode=0x0002, Broadcom Dongle Host Driver mac=02:1a:11:f1:fd:f6
Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
Driver: 1.28.23.3 (r)
Firmware: wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
wl_android_wifi_on: Success
CFG80211-ERROR) wl_cfg80211_set_channel : netdev_ifidx(5), chan_type(0) target channel(13)
8021q: 802.1Q VLAN Support v1.8
CFG80211-ERROR) wl_cfg80211_parse_ies : No WPSIE in beacon
CFG80211-ERROR) wl_cfg80211_parse_ies : No WPSIE in beacon
wlan0: no IPv6 routers present
CFG80211-ERROR) wl_cfg80211_stop_ap : SET INFRA error -7
wl_android_wifi_off in
bcmsdh_sdmmc: F0 Wr:0x04: write disallowed
bcmsdh_set_irq Flag = 0
net_ratelimit: 1 callbacks suppressed
dhd_bus_devreset: WLAN OFF DONE
dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to insert WLAN RESET
sdio wifi power state: off
=========== WLAN placed in RESET ========
dhd_open, firmware path /lib/firmware/ap6210/fw_bcmxxxx.bin
dhd_bus_select_firmware_name_by_chip: firmware_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
Dongle Host Driver, version 1.28.23.3 (r)
wl_android_wifi_on in
dhd_customer_gpio_wlan_ctrl: callc customer specific GPIO to remove WLAN RESET
sdio wifi power state: on
=========== WLAN going back to live ========
sdio_reset_comm():
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set round clock 400000, src 24000000
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set round clock 42857143, src 600000000
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
dhd_bus_devreset: == WLAN ON ==
F1 signature read @0x18000000=0x1591a962
bcmsdh_config_hw_oob_intr: Enter
DHD: dongle ram size is set to 245760(orig 245760)
dhd_bus_select_firmware_name_by_chip: firmware_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
bcmsdh_set_irq Flag = 1
dhd_bus_devreset: WLAN ON DONE
Firmware up: op_mode=0x0002, Broadcom Dongle Host Driver mac=02:1a:11:f6:94:78
Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
Driver: 1.28.23.3 (r)
Firmware: wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
wl_android_wifi_on: Success
wl_android_wifi_off in
bcmsdh_sdmmc: F0 Wr:0x04: write disallowed
bcmsdh_set_irq Flag = 0
net_ratelimit: 1 callbacks suppressed
dhd_bus_devreset: WLAN OFF DONE
dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to insert WLAN RESET
sdio wifi power state: off
=========== WLAN placed in RESET ========
EXT4-fs (nandc): mounted filesystem with ordered data mode. Opts: (null)