dmesg - prueba1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-19-generic (buildd@panlong) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #29-Ubuntu SMP Wed Apr 17 18:19:42 UTC 2013 (Ubuntu 3.8.0-19.29-generic 3.8.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007f4aefff] usable
BIOS-e820: [mem 0x000000007f4af000-0x000000007f5aefff] reserved
BIOS-e820: [mem 0x000000007f5af000-0x000000007f6aefff] ACPI NVS
BIOS-e820: [mem 0x000000007f6af000-0x000000007f6eefff] ACPI data
BIOS-e820: [mem 0x000000007f6ef000-0x000000007f6effff] usable
BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Acer AOD270/JE01_CT , BIOS V1.03 01/03/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFE00000 mask FFFE00000 write-protect
1 base 000000000 mask FC0000000 write-back
2 base 040000000 mask FC0000000 write-back
3 base 07F800000 mask FFF800000 uncachable
4 disabled
5 base 07F6F0000 mask FFFFF0000 uncachable
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000fe260-0x000fe26f] mapped at [c00fe260]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009a000] 9a000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x3447c000-0x36235fff]
ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
ACPI: XSDT 7f6ee120 0008C (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 7f6ed000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: DSDT 7f6e1000 0780E (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: FACS 7f674000 00040
ACPI: HPET 7f6ec000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: APIC 7f6eb000 00078 (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MCFG 7f6ea000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: WDRT 7f6e9000 00047 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: SLIC 7f6e0000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: BOOT 7f6df000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MSDM 7f6de000 00055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: FPDT 7f6dc000 00090 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 7f6db000 00655 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 7f6da000 00259 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 7f6d9000 0020F (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: WDAT 7f6d8000 00194 (v01 INSYDE H2O BIOS 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
1146MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x7f6effff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009dfff]
node 0: [mem 0x00100000-0x7f4aefff]
node 0: [mem 0x7f6ef000-0x7f6effff]
On node 0 totalpages: 521278
free_area_init_node: node 0, pgdat c18f6100, node_mem_map f6c0d200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3950 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 2294 pages used for memmap
HighMem zone: 290748 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f6bc9000 s35008 r0 d22336 u57344
pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517200
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
allocated 4175616 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0007f6f0)
Memory: 2022212k/2087872k available (6251k kernel code, 62900k reserved, 2973k data, 784k init, 1172168k highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1903000 - 0xc19c7000 ( 784 kB)
.data : 0xc161ad30 - 0xc19023c0 (2973 kB)
.text : 0xc1000000 - 0xc161ad30 (6251 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f4008000 soft=f400a000
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1596.026 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.05 BogoMIPS (lpj=6384104)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring handled by SMI
process: using mwait in idle threads
Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26115 entries in 52 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz (fam: 06, model: 36, stepping: 01)
Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
CPU 1 irqstacks, hard=f40d4000 soft=f40d6000
Initializing CPU#1
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1
CPU 2 irqstacks, hard=f415e000 soft=f4160000
Initializing CPU#2
CPU2: Thermal monitoring handled by SMI
#2
CPU 3 irqstacks, hard=f418c000 soft=f418e000
#3 OK
Initializing CPU#3
CPU3: Thermal monitoring handled by SMI
Brought up 4 CPUs
smpboot: Total of 4 processors activated (12768.20 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7f5af000-0x7f6aefff] (1048576 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
EISA bus registered
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 7f567a90 002E9 (v01 PmRef Cpu0Ist 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 002E9 (v01 PmRef Cpu0Ist 00003000 INTL 20100121)
ACPI: SSDT 7f566710 006D5 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 006D5 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: SSDT 7f567e10 001CF (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: SSDT 7f565f10 0008D (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
_OSC request data:1 8 1f
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
pci 0000:00:00.0: [8086:0bf1] type 00 class 0x060000
pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0x86000000-0x860fffff]
pci 0000:00:02.0: reg 14: [io 0x50d0-0x50d7]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0x86100000-0x86103fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf]
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0x5080-0x509f]
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0x5060-0x507f]
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 20: [io 0x5040-0x505f]
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0x86105000-0x861053ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x50c8-0x50cf]
pci 0000:00:1f.2: reg 14: [io 0x50dc-0x50df]
pci 0000:00:1f.2: reg 18: [io 0x50c0-0x50c7]
pci 0000:00:1f.2: reg 1c: [io 0x50d8-0x50db]
pci 0000:00:1f.2: reg 20: [io 0x5020-0x502f]
pci 0000:00:1f.2: reg 24: [mem 0x86104000-0x861043ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:01:00.0: reg 10: [io 0x4000-0x40ff]
pci 0000:01:00.0: reg 18: [mem 0x80004000-0x80004fff 64bit pref]
pci 0000:01:00.0: reg 20: [mem 0x80000000-0x80003fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0x85000000-0x85ffffff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0x80ffffff 64bit pref]
pci 0000:02:00.0: [14e4:4727] type 00 class 0x028000
pci 0000:02:00.0: reg 10: [mem 0x84000000-0x84003fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0x84000000-0x84ffffff]
pci 0000:00:1c.1: bridge window [mem 0x81000000-0x81ffffff 64bit pref]
pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
pci 0000:03:00.0: reg 10: [mem 0x83001000-0x83001fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0x83000000-0x83ffffff]
pci 0000:00:1c.2: bridge window [mem 0x82000000-0x82ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x7f800000-0x7fffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
_OSC request data:1 1f 1f
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x7f4af000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs SYN1b20 SYN1b00 SYN0002 PNP0f13 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:06: [io 0x0680-0x069f] has been reserved
system 00:06: [io 0x1000-0x1003] has been reserved
system 00:06: [io 0x1010-0x101f] has been reserved
system 00:06: [io 0x1004-0x1007] has been reserved
system 00:06: [io 0x0400-0x047f] has been reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [io 0x0600-0x061f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x06a0-0x06af] has been reserved
system 00:07: [io 0x06b0-0x06ff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0x00000000-0x00003fff] could not be reserved
system 00:09: [mem 0x00000000-0x00000fff] could not be reserved
system 00:09: [mem 0x00000000-0x00000fff] could not be reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0x85000000-0x85ffffff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0x80ffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0x84000000-0x84ffffff]
pci 0000:00:1c.1: bridge window [mem 0x81000000-0x81ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0x83000000-0x83ffffff]
pci 0000:00:1c.2: bridge window [mem 0x82000000-0x82ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff]
pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff]
pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0x85000000-0x85ffffff]
pci_bus 0000:01: resource 2 [mem 0x80000000-0x80ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0x84000000-0x84ffffff]
pci_bus 0000:02: resource 2 [mem 0x81000000-0x81ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0x83000000-0x83ffffff]
pci_bus 0000:03: resource 2 [mem 0x82000000-0x82ffffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0x000e0000-0x000effff]
pci_bus 0000:04: resource 9 [mem 0x000f0000-0x000fffff]
pci_bus 0000:04: resource 10 [mem 0x7f800000-0x7fffffff]
pci_bus 0000:04: resource 11 [mem 0x80000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30440k freed
Simple Boot Flag at 0x44 set to 0x1
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1384774573.200:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 1719
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 54
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (50 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
ACPI: Battery Slot [BAT1] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 17, io mem 0x86105000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 17, io base 0x000050a0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005040
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:08: RTC can wake from S4
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fceb9fd088cf158e29d83343e1c98bf8ab23d94a'
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:08: setting system clock to 2013-11-18 11:36:14 UTC (1384774574)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
isapnp: No Plug & Play device found
Freeing unused kernel memory: 784k freed
Write protecting the kernel text: 6252k
Write protecting the kernel read-only data: 2432k
NX-protecting the kernel data: 3988k
udevd[109]: starting version 175
usb 1-3: new high-speed USB device number 3 using ehci-pci
Disabling lock debugging due to kernel taint
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: irq 43 for MSI/MSI-X
r8169 0000:01:00.0 eth0: RTL8105e at 0xf8414000, 04:7d:7b:26:e4:23, XID 00a00000 IRQ 43
ahci 0000:00:1f.2: version 3.0
rtsx_pci 0000:03:00.0: irq 44 for MSI/MSI-X
rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 44
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0x86104000 port 0x86104100 irq 45
ata2: SATA max UDMA/133 abar m1024@0x86104000 port 0x86104180 irq 45
ata3: DUMMY
ata4: DUMMY
gma500 0000:00:02.0: setting latency timer to 64
gma500 0000:00:02.0: irq 46 for MSI/MSI-X
usb 1-3: New USB device found, idVendor=1bcf, idProduct=288a
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: 1.3M HD WebCam
usb 1-3: Manufacturer: BRBBJ0KBL
acpi device:1c: registered as cooling_device4
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133
ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: new low-speed USB device number 2 using uhci_hcd
gma500 0000:00:02.0: trying to get vblank count for disabled pipe 0
gma500 0000:00:02.0: trying to get vblank count for disabled pipe 0
tsc: Refined TSC clocksource calibration: 1595.999 MHz
Switching to clocksource tsc
ata2: SATA link down (SStatus 0 SControl 300)
fbcon: psbfb (fb0) is primary device
usb 2-1: New USB device found, idVendor=04f2, idProduct=0402
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Keyboard
usb 2-1: Manufacturer: Chicony
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input6
hid-generic 0003:04F2:0402.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.0-1/input0
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input7
hid-generic 0003:04F2:0402.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:1d.0-1/input1
Console: switching to colour frame buffer device 128x37
gma500 0000:00:02.0: fb0: psbfb frame buffer device
gma500 0000:00:02.0: registered panic notifier
[drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0
xor: automatically using best checksumming function:
pIII_sse : 4862.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
Btrfs loaded
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
Adding 2083836k swap on /dev/sda7. Priority:-1 extents:1 across:2083836k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[462]: starting version 175
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
microcode: CPU0 sig=0x30661, pf=0x8, revision=0x109
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \SWC1 2 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
bcma: bus0: Bus registered
device-mapper: multipath: version 1.5.1 loaded
Linux video capture interface: v2.00
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
hda_codec: ALC269VB: SKU not ready 0x598301f0
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (1bcf:288a)
input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
microcode: CPU1 sig=0x30661, pf=0x8, revision=0x109
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x1
acer_wmi: Brightness must be controlled by acpi video driver
cfg80211: Calling CRDA to update world regulatory domain
microcode: CPU2 sig=0x30661, pf=0x8, revision=0x109
input: Acer WMI hotkeys as /devices/virtual/input/input12
input: Acer BMA150 accelerometer as /devices/virtual/input/input13
microcode: CPU3 sig=0x30661, pf=0x8, revision=0x109
microcode: Microcode Update Driver: v2.00 , Peter Oruba
coretemp coretemp.0: Unable to read TjMax from CPU 0
coretemp coretemp.0: Unable to read TjMax from CPU 2
psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 528321
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input14
brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
init: failsafe main process (822) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: avahi-cups-reload main process (891) terminated with status 1
ppdev: user-space parallel port driver
r8169 0000:01:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with f0:7d:68:91:43:5c
wlan0: send auth to f0:7d:68:91:43:5c (try 1/3)
wlan0: authenticated
wlan0: associate with f0:7d:68:91:43:5c (try 1/3)
wlan0: RX AssocResp from f0:7d:68:91:43:5c (capab=0xc31 status=0 aid=1)
brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)