dmesg - first
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-44-generic (buildd@panlong) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #67-Ubuntu SMP Tue Nov 12 19:36:14 UTC 2013 (Ubuntu 3.5.0-44.67-generic 3.5.7.25)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable
BIOS-e820: [mem 0x0000000000099800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003c6b9fff] usable
BIOS-e820: [mem 0x000000003c6ba000-0x000000003c9c3fff] reserved
BIOS-e820: [mem 0x000000003c9c4000-0x000000003cad9fff] ACPI data
BIOS-e820: [mem 0x000000003cada000-0x000000003d8c7fff] ACPI NVS
BIOS-e820: [mem 0x000000003d8c8000-0x000000003e9a5fff] reserved
BIOS-e820: [mem 0x000000003e9a6000-0x000000003e9a6fff] usable
BIOS-e820: [mem 0x000000003e9a7000-0x000000003eba9fff] ACPI NVS
BIOS-e820: [mem 0x000000003ebaa000-0x000000003effffff] usable
BIOS-e820: [mem 0x0000000040000000-0x000000004fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000008bfffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: ASUSTeK COMPUTER INC. Z9PE-D8 WS/Z9PE-D8 WS, BIOS 5004 06/24/2013
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x8c0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DBFFF write-protect
DC000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FF800000000 write-back
1 base 000800000000 mask 3FFF80000000 write-back
2 base 000880000000 mask 3FFFC0000000 write-back
3 base 000040000000 mask 3FFFC0000000 uncachable
4 base 000080000000 mask 3FFF80000000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 32GB, range: 2GB, type WB
reg 2, base: 34GB, range: 1GB, type WB
reg 3, base: 1GB, range: 1GB, type UC
reg 4, base: 2GB, range: 2GB, type UC
total RAM covered: 32768M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 4GB, range: 4GB, type WB
reg 2, base: 8GB, range: 8GB, type WB
reg 3, base: 16GB, range: 16GB, type WB
reg 4, base: 32GB, range: 2GB, type WB
reg 5, base: 34GB, range: 1GB, type WB
e820: update [mem 0x40000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x3f000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdb30-0x000fdb3f] mapped at [ffff8800000fdb30]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000093000] 93000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x3effffff]
[mem 0x00000000-0x3effffff] page 2M
kernel direct mapping tables up to 0x3effffff @ [mem 0x1fffe000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x8bfffffff]
[mem 0x100000000-0x8bfffffff] page 1G
kernel direct mapping tables up to 0x8bfffffff @ [mem 0x3efff000-0x3effffff]
RAMDISK: [mem 0x35430000-0x36a0ffff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 000000003c9fb088 00084 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 000000003ca083f0 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 000000003c9fb1a0 0D250 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 000000003d8c5f80 00040
ACPI: APIC 000000003ca08500 00138 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 000000003ca08638 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 000000003ca08680 0003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: DMAR 000000003cad98f8 000C4 (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: HPET 000000003ca08718 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: PRAD 000000003ca08750 000BE (v02 PRADID PRADTID 00000001 MSFT 03000001)
ACPI: SSDT 000000003ca08810 D0CB0 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: EINJ 000000003cad94c0 00130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 000000003cad95f0 00230 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 000000003cad9820 000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 000000003cad98c8 00030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000008bfffffff]
Initmem setup node 0 [mem 0x00000000-0x8bfffffff]
NODE_DATA [mem 0x8bfffc000-0x8bfffffff]
[ffffea0000000000-ffffea0022ffffff] PMD -> [ffff88089f600000-ffff8808bf5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x8bfffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x00098fff]
node 0: [mem 0x00100000-0x3c6b9fff]
node 0: [mem 0x3e9a6000-0x3e9a6fff]
node 0: [mem 0x3ebaa000-0x3effffff]
node 0: [mem 0x100000000-0x8bfffffff]
On node 0 totalpages: 8374938
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3907 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 228177 pages, LIFO batch:31
Normal zone: 126976 pages used for memmap
Normal zone: 7999488 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 16 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 0000000000099000 - 000000000009a000
PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000003c6ba000 - 000000003c9c4000
PM: Registered nosave memory: 000000003c9c4000 - 000000003cada000
PM: Registered nosave memory: 000000003cada000 - 000000003d8c8000
PM: Registered nosave memory: 000000003d8c8000 - 000000003e9a6000
PM: Registered nosave memory: 000000003e9a7000 - 000000003ebaa000
PM: Registered nosave memory: 000000003f000000 - 0000000040000000
PM: Registered nosave memory: 0000000040000000 - 0000000050000000
PM: Registered nosave memory: 0000000050000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0x50000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff8808bfc00000 s83584 r8192 d22912 u131072
pcpu-alloc: s83584 r8192 d22912 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8231572
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32869360k/36700160k available (6721k kernel code, 3200408k absent, 630392k reserved, 6448k data, 932k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:1216 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2609.469 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5218.93 BogoMIPS (lpj=10437876)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 20 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25124 entries in 99 pages
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0462 ecap f020ff
DMAR: RMRR base: 0x0000003c982000 end: 0x0000003c9a6fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0
IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0
HPET id 0 under DRHD base 0xfbffc000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 Ok.
Brought up 16 CPUs
Total of 16 processors activated (83503.00 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x3cada000-0x3d8c7fff] (14606336 bytes)
PM: Registering ACPI NVS region [mem 0x3e9a7000-0x3eba9fff] (2109440 bytes)
dummy:
RTC time: 21:42:08, date: 11/15/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x40000000-0x4fffffff] (base 0x40000000)
PCI: MMCONFIG at [mem 0x40000000-0x4fffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfbffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x40000000-0xfbffffff]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:3c03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:3c0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 10: [mem 0xf310b000-0xf310bfff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf310a000-0xf310a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 10: [mem 0xf3109000-0xf310900f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf3107000-0xf31073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf3100000-0xf3103fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:1d1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf3106000-0xf31063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xf3105000-0xf31057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf3104000-0xf31040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:03:00.0: [10de:1184] type 00 class 0x030000
pci 0000:03:00.0: reg 10: [mem 0xf2000000-0xf2ffffff]
pci 0000:03:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:03:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:03:00.0: reg 30: [mem 0xf3000000-0xf307ffff pref]
pci 0000:03:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:03:00.1: reg 10: [mem 0xf3080000-0xf3083fff]
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xe8000000-0xf30fffff]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:05:00.0: [1b85:1041] type 00 class 0x010000
pci 0000:05:00.0: reg 10: [mem 0xf4040000-0xf405ffff 64bit]
pci 0000:05:00.0: reg 18: [mem 0xf4000000-0xf403ffff 64bit]
pci 0000:05:00.0: reg 30: [mem 0xf4060000-0xf406ffff pref]
pci 0000:05:00.0: supports D1
pci 0000:05:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:03.2: PCI bridge to [bus 05-05]
pci 0000:00:03.2: bridge window [mem 0xf4000000-0xf40fffff]
pci 0000:06:00.0: [8086:1d6b] type 00 class 0x010700
pci 0000:06:00.0: reg 10: [mem 0xf3800000-0xf3803fff 64bit pref]
pci 0000:06:00.0: reg 18: [mem 0xf3400000-0xf37fffff 64bit pref]
pci 0000:06:00.0: reg 20: [io 0xd000-0xd0ff]
pci 0000:06:00.0: reg 164: [mem 0xfbe00000-0xfbe03fff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 06-06]
pci 0000:00:11.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:11.0: bridge window [mem 0xf3400000-0xf38fffff]
pci 0000:00:11.0: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
pci 0000:07:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:07:00.0: reg 10: [mem 0xf3f00000-0xf3f1ffff]
pci 0000:07:00.0: reg 18: [io 0xc000-0xc01f]
pci 0000:07:00.0: reg 1c: [mem 0xf3f20000-0xf3f23fff]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xf3f00000-0xf3ffffff]
pci 0000:08:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:08:00.0: reg 10: [mem 0xf3e00000-0xf3e1ffff]
pci 0000:08:00.0: reg 18: [io 0xb000-0xb01f]
pci 0000:08:00.0: reg 1c: [mem 0xf3e20000-0xf3e23fff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 08-08]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xf3e00000-0xf3efffff]
pci 0000:09:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:09:00.0: reg 10: [mem 0xf3d00000-0xf3d07fff 64bit]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 09-09]
pci 0000:00:1c.2: bridge window [mem 0xf3d00000-0xf3dfffff]
pci 0000:0a:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:0a:00.0: reg 10: [mem 0xf3c00000-0xf3c07fff 64bit]
pci 0000:0a:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.3: bridge window [mem 0xf3c00000-0xf3cfffff]
pci 0000:0b:00.0: [1b4b:9230] type 00 class 0x010601
pci 0000:0b:00.0: reg 10: [io 0xa050-0xa057]
pci 0000:0b:00.0: reg 14: [io 0xa040-0xa043]
pci 0000:0b:00.0: reg 18: [io 0xa030-0xa037]
pci 0000:0b:00.0: reg 1c: [io 0xa020-0xa023]
pci 0000:0b:00.0: reg 20: [io 0xa000-0xa01f]
pci 0000:0b:00.0: reg 24: [mem 0xf3b10000-0xf3b107ff]
pci 0000:0b:00.0: reg 30: [mem 0xf3b00000-0xf3b0ffff pref]
pci 0000:0b:00.0: PME# supported from D3hot
pci 0000:00:1c.4: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.4: bridge window [mem 0xf3b00000-0xf3bfffff]
pci 0000:0c:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:0c:00.0: reg 10: [mem 0xf3a00000-0xf3a007ff 64bit]
pci 0000:0c:00.0: reg 18: [io 0x9000-0x90ff]
pci 0000:0c:00.0: supports D2
pci 0000:0c:00.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.6: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.6: bridge window [mem 0xf3a00000-0xf3afffff]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfbffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.BR1B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
PCI host bridge to bus 0000:ff
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.3: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
pci0000:ff: Requesting ACPI _OSC control (0x1d)
pci0000:ff: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00099800-0x0009ffff]
e820: reserve RAM buffer [mem 0x3c6ba000-0x3fffffff]
e820: reserve RAM buffer [mem 0x3e9a7000-0x3fffffff]
e820: reserve RAM buffer [mem 0x3f000000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-fe]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x03af window]
pnp 00:00: [io 0x03e0-0x0cf7 window]
pnp 00:00: [io 0x03b0-0x03df window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0x40000000-0xfbffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfeafffff]
pnp 00:01: [mem 0xfeb00000-0xfebfffff]
pnp 00:01: [mem 0xfed00400-0xfed3ffff]
pnp 00:01: [mem 0xfed45000-0xfedfffff]
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: [mem 0x00000400-0x000004ff]
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:01: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:01: [mem 0x00000400-0x000004ff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [mem 0xfbffc000-0xfbffdfff]
system 00:02: [mem 0xfbffc000-0xfbffdfff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0290-0x029f]
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0081-0x0083]
pnp 00:04: [io 0x0087]
pnp 00:04: [io 0x0089-0x008b]
pnp 00:04: [io 0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0070-0x0071]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x005f]
pnp 00:07: [io 0x0062-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x0072-0x007f]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x00f0-0x00ff]
pnp 00:08: [irq 13]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:09: [io 0x0400-0x0453]
pnp 00:09: [io 0x0458-0x047f]
pnp 00:09: [io 0x1180-0x119f]
pnp 00:09: [io 0x0500-0x057f]
pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
pnp 00:09: [mem 0xfec00000-0xfecfffff]
pnp 00:09: [mem 0xfed08000-0xfed08fff]
pnp 00:09: [mem 0xff000000-0xffffffff]
system 00:09: [io 0x0400-0x0453] has been reserved
system 00:09: [io 0x0458-0x047f] has been reserved
system 00:09: [io 0x1180-0x119f] has been reserved
system 00:09: [io 0x0500-0x057f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0a: [io 0x0454-0x0457]
system 00:0a: [io 0x0454-0x0457] has been reserved
system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0b: [mem 0xfed00000-0xfed003ff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0c: [bus ff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xe8000000-0xf30fffff]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.2: PCI bridge to [bus 05-05]
pci 0000:00:03.2: bridge window [mem 0xf4000000-0xf40fffff]
pci 0000:00:11.0: PCI bridge to [bus 06-06]
pci 0000:00:11.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:11.0: bridge window [mem 0xf3400000-0xf38fffff]
pci 0000:00:11.0: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xf3f00000-0xf3ffffff]
pci 0000:00:1c.1: PCI bridge to [bus 08-08]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xf3e00000-0xf3efffff]
pci 0000:00:1c.2: PCI bridge to [bus 09-09]
pci 0000:00:1c.2: bridge window [mem 0xf3d00000-0xf3dfffff]
pci 0000:00:1c.3: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.3: bridge window [mem 0xf3c00000-0xf3cfffff]
pci 0000:00:1c.4: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.4: bridge window [mem 0xf3b00000-0xf3bfffff]
pci 0000:00:1c.6: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.6: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.6: bridge window [mem 0xf3a00000-0xf3afffff]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x40000000-0xfbffffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xe8000000-0xf30fffff]
pci_bus 0000:05: resource 1 [mem 0xf4000000-0xf40fffff]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xf3400000-0xf38fffff]
pci_bus 0000:06: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xf3f00000-0xf3ffffff]
pci_bus 0000:08: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:08: resource 1 [mem 0xf3e00000-0xf3efffff]
pci_bus 0000:09: resource 1 [mem 0xf3d00000-0xf3dfffff]
pci_bus 0000:0a: resource 1 [mem 0xf3c00000-0xf3cfffff]
pci_bus 0000:0b: resource 0 [io 0xa000-0xafff]
pci_bus 0000:0b: resource 1 [mem 0xf3b00000-0xf3bfffff]
pci_bus 0000:0c: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:0c: resource 1 [mem 0xf3a00000-0xf3afffff]
pci_bus 0000:0d: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0d: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0d: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0d: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:0d: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0d: resource 10 [mem 0x40000000-0xfbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x386ba000-0x3c6b9fff] (64MB) mapped at [ffff8800386ba000-ffff88003c6b9fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1384551728.932:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 32768
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 65 for MSI/MSI-X
pcieport 0000:00:01.1: irq 66 for MSI/MSI-X
pcieport 0000:00:02.0: irq 67 for MSI/MSI-X
pcieport 0000:00:03.0: irq 68 for MSI/MSI-X
pcieport 0000:00:03.2: irq 69 for MSI/MSI-X
pcieport 0000:00:11.0: irq 70 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 71 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 72 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 73 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 74 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 75 for MSI/MSI-X
pcieport 0000:00:1c.6: irq 76 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:11.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Freeing initrd memory: 22400k freed
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 17, io mem 0xf3107000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-44-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf3106000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-44-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:09:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 83 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 84 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.5.0-44-generic xhci_hcd
usb usb3: SerialNumber: 0000:09:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.5.0-44-generic xhci_hcd
usb usb4: SerialNumber: 0000:09:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0a:00.0: irq 85 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 86 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 87 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 88 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 89 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 90 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 91 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 92 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.5.0-44-generic xhci_hcd
usb usb5: SerialNumber: 0000:0a:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.5.0-44-generic xhci_hcd
usb usb6: SerialNumber: 0000:0a:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 5:72:753
tty ttyS4: hash matches
rtc_cmos 00:05: setting system clock to 2013-11-15 21:42:09 UTC (1384551729)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 932k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1460k freed
Freeing unused kernel memory: 1132k freed
udevd[151]: starting version 175
mvsas 0000:05:00.0: mvsas: driver version 0.8.16
mvsas 0000:05:00.0: mvsas: PCI-E x4, Bandwidth Usage: 5.0 Gbps
isci: Intel(R) C600 SAS Controller Driver - version 1.1.0
isci 0000:06:00.0: driver configured for rev: 6 silicon
isci 0000:06:00.0: OEM parameter table found in OROM
isci 0000:06:00.0: OEM SAS parameters (version: 1.0) loaded (platform)
isci 0000:06:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short}
e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
scsi1 : isci
e1000e 0000:07:00.0: Disabling ASPM L0s L1
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 93 for MSI/MSI-X
e1000e 0000:07:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:07:00.0: irq 94 for MSI/MSI-X
e1000e 0000:07:00.0: irq 95 for MSI/MSI-X
e1000e 0000:07:00.0: irq 96 for MSI/MSI-X
isci 0000:06:00.0: irq 97 for MSI/MSI-X
isci 0000:06:00.0: irq 98 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf3105000 port 0xf3105100 irq 93
ata2: SATA max UDMA/133 abar m2048@0xf3105000 port 0xf3105180 irq 93
ata3: SATA max UDMA/133 abar m2048@0xf3105000 port 0xf3105200 irq 93
ata4: SATA max UDMA/133 abar m2048@0xf3105000 port 0xf3105280 irq 93
ata5: SATA max UDMA/133 abar m2048@0xf3105000 port 0xf3105300 irq 93
ata6: SATA max UDMA/133 abar m2048@0xf3105000 port 0xf3105380 irq 93
ahci 0000:0b:00.0: irq 99 for MSI/MSI-X
firewire_ohci 0000:0c:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
ahci 0000:0b:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:0b:00.0: flags: 64bit ncq pio
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
scsi11 : ahci
scsi12 : ahci
scsi13 : ahci
scsi14 : ahci
scsi15 : ahci
ata7: SATA max UDMA/133 abar m2048@0xf3b10000 port 0xf3b10100 irq 99
ata8: SATA max UDMA/133 abar m2048@0xf3b10000 port 0xf3b10180 irq 99
ata9: SATA max UDMA/133 abar m2048@0xf3b10000 port 0xf3b10200 irq 99
ata10: SATA max UDMA/133 abar m2048@0xf3b10000 port 0xf3b10280 irq 99
ata11: SATA max UDMA/133 abar m2048@0xf3b10000 port 0xf3b10300 irq 99
ata12: SATA max UDMA/133 abar m2048@0xf3b10000 port 0xf3b10380 irq 99
ata13: SATA max UDMA/133 abar m2048@0xf3b10000 port 0xf3b10400 irq 99
ata14: SATA max UDMA/133 abar m2048@0xf3b10000 port 0xf3b10480 irq 99
usb 1-1: new high-speed USB device number 2 using ehci_hcd
e1000e 0000:07:00.0: eth0: (PCI Express:2.5GT/s:Width x1) ac:22:0b:b0:d1:4d
e1000e 0000:07:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:07:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:08:00.0: Disabling ASPM L0s L1
e1000e 0000:08:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:08:00.0: irq 100 for MSI/MSI-X
e1000e 0000:08:00.0: irq 101 for MSI/MSI-X
e1000e 0000:08:00.0: irq 102 for MSI/MSI-X
e1000e 0000:08:00.0: eth1: (PCI Express:2.5GT/s:Width x1) ac:22:0b:b0:d1:4e
e1000e 0000:08:00.0: eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:08:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci_hcd
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi: waiting for bus probes to complete ...
ata11: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: ATA-7: WDC WD2500YS-01SHB1, 20.06C06, max UDMA/133
ata5.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
scsi 6:0:0:0: Direct-Access ATA WDC WD2500YS-01S 20.0 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 490234752 512-byte logical blocks: (251 GB/233 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3
sd 6:0:0:0: [sdb] Attached SCSI disk
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata14.00: configured for UDMA/66
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
firewire_core 0000:0c:00.0: created device fw0: GUID fedcba9876543210, S400
ata7.00: ATA-8: MARVELL Raid VD 0, MV.R00-0, max UDMA7
ata7.00: 937396480 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata7.00: configured for UDMA/133
scsi 8:0:0:0: Direct-Access ATA MARVELL Raid VD MV.R PQ: 0 ANSI: 5
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdc] 937396480 512-byte logical blocks: (479 GB/446 GiB)
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >
sd 8:0:0:0: [sdc] Attached SCSI disk
scsi 15:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5
scsi 15:0:0:0: Attached scsi generic sg3 type 3
Refined TSC clocksource calibration: 2609.518 MHz.
Switching to clocksource tsc
usb 2-1.1: new low-speed USB device number 3 using ehci_hcd
usb 2-1.1: New USB device found, idVendor=046d, idProduct=c044
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: USB-PS/2 Optical Mouse
usb 2-1.1: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input2
hid-generic 0003:046D:C044.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.1/input0
usb 2-1.2: new high-speed USB device number 4 using ehci_hcd
usb 2-1.2: New USB device found, idVendor=0409, idProduct=0056
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2: Product: USB Mass Storage Device
usb 2-1.2: Manufacturer: TSST corp
usb 2-1.2: SerialNumber: 000000000001
Initializing USB Mass Storage driver...
scsi16 : usb-storage 2-1.2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 2-1.3: new low-speed USB device number 5 using ehci_hcd
usb 2-1.3: New USB device found, idVendor=0461, idProduct=0010
usb 2-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.3: Product: USB Keyboard
input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input3
hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:1d.0-1.3/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input4
hid-generic 0003:0461:0010.0003: input,hidraw2: USB HID v1.11 Device [USB Keyboard] on usb-0000:00:1d.0-1.3/input1
usb 2-1.6: new high-speed USB device number 6 using ehci_hcd
usb 2-1.6: New USB device found, idVendor=0409, idProduct=0059
usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1.6:1.0: USB hub found
hub 2-1.6:1.0: 4 ports detected
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_94xx.c 838:get all reg link rate is 0x122000
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_94xx.c 843:get link rate is 10
scsi 16:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182M SB06 PQ: 0 ANSI: 0
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 1175:phy 0 attach dev info is 20001
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 1177:phy 0 attach sas addr is 0
sr0: scsi3-mmc drive: 8x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 16:0:0:0: Attached scsi CD-ROM sr0
sr 16:0:0:0: Attached scsi generic sg4 type 5
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_94xx.c 838:get all reg link rate is 0x122000
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_94xx.c 843:get link rate is 10
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 1175:phy 1 attach dev info is 20001
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 1177:phy 1 attach sas addr is 1
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 1175:phy 2 attach dev info is 0
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 1177:phy 2 attach sas addr is 0
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 1175:phy 3 attach dev info is 0
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 1177:phy 3 attach sas addr is 0
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_94xx.c 838:get all reg link rate is 0x122000
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_94xx.c 843:get link rate is 10
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 1175:phy 4 attach dev info is 20001
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 1177:phy 4 attach sas addr is 4
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_94xx.c 838:get all reg link rate is 0x122000
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_94xx.c 843:get link rate is 10
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 1175:phy 5 attach dev info is 20001
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 1177:phy 5 attach sas addr is 5
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 1175:phy 6 attach dev info is 0
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 1177:phy 6 attach sas addr is 0
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 1175:phy 7 attach dev info is 0
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 1177:phy 7 attach sas addr is 0
scsi0 : mvsas
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 277:phy 0 byte dmaded.
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 277:phy 1 byte dmaded.
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 277:phy 4 byte dmaded.
/build/buildd/linux-3.5.0/drivers/scsi/mvsas/mv_sas.c 277:phy 5 byte dmaded.
sas: phy-0:0 added to port-0:0, phy_mask:0x1 ( 0)
sas: phy-0:1 added to port-0:1, phy_mask:0x2 ( 100000000000000)
sas: phy-0:4 added to port-0:2, phy_mask:0x1 ( 400000000000000)
sas: phy-0:5 added to port-0:3, phy_mask:0x2 ( 500000000000000)
sas: DOING DISCOVERY on port 0, pid:400
sas: DONE DISCOVERY on port 0, pid:400, result:0
sas: DOING DISCOVERY on port 1, pid:400
sas: DONE DISCOVERY on port 1, pid:400, result:0
sas: DOING DISCOVERY on port 2, pid:400
sas: DONE DISCOVERY on port 2, pid:400, result:0
sas: DOING DISCOVERY on port 3, pid:400
sas: DONE DISCOVERY on port 3, pid:400, result:0
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata15: end_device-0:0: dev error handler
ata15.00: ATA-8: OCZ-REVODRIVE3 X2, 2.25, max UDMA/133
ata15.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata15.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0
scsi 0:0:0:0: Direct-Access ATA OCZ-REVODRIVE3 X 2.25 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
ata16.00: ATA-8: OCZ-REVODRIVE3 X2, 2.25, max UDMA/133
ata16.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata16.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0
scsi 0:0:1:0: Direct-Access ATA OCZ-REVODRIVE3 X 2.25 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: ata17: end_device-0:2: dev error handler
ata17.00: ATA-8: OCZ-REVODRIVE3 X2, 2.25, max UDMA/133
ata17.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata17.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0
scsi 0:0:2:0: Direct-Access ATA OCZ-REVODRIVE3 X 2.25 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: ata17: end_device-0:2: dev error handler
sas: ata18: end_device-0:3: dev error handler
ata18.00: ATA-8: OCZ-REVODRIVE3 X2, 2.25, max UDMA/133
ata18.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata18.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0
scsi 0:0:3:0: Direct-Access ATA OCZ-REVODRIVE3 X 2.25 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg5 type 0
sd 0:0:0:0: [sdd] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:1:0: Attached scsi generic sg6 type 0
sd 0:0:0:0: [sdd] Write Protect is off
sd 0:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sde] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sde] Write Protect is off
sd 0:0:1:0: [sde] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:2:0: [sdf] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:2:0: [sdf] Write Protect is off
sd 0:0:2:0: [sdf] Mode Sense: 00 3a 00 00
sd 0:0:2:0: Attached scsi generic sg7 type 0
sd 0:0:2:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:3:0: [sdg] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:3:0: Attached scsi generic sg8 type 0
sd 0:0:3:0: [sdg] Write Protect is off
sd 0:0:3:0: [sdg] Mode Sense: 00 3a 00 00
sd 0:0:3:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdg: unknown partition table
sdd: sdd1 sdd2
sd 0:0:3:0: [sdg] Attached SCSI disk
sdd: p2 size 369899520 extends beyond EOD, enabling native capacity
sde: unknown partition table
sdf: unknown partition table
sdd: sdd1 sdd2
sd 0:0:1:0: [sde] Attached SCSI disk
sdd: p2 size 369899520 extends beyond EOD, truncated
sd 0:0:2:0: [sdf] Attached SCSI disk
sd 0:0:0:0: [sdd] Attached SCSI disk
EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
udevd[612]: starting version 175
lp: driver loaded but no devices found
wmi: Mapper loaded
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
mei 0000:00:16.0: Device doesn't have valid ME Interface
mei 0000:00:16.0: initialization failed.
ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \_SB_.PCI0.HEC1.TCOS 2 (20120320/utaddress-251)
ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \_SB_.PCI0.HEC2.TCOS 3 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GINV 1 (20120320/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SI_.LEDT 2 (20120320/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SI_.LEDR 3 (20120320/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 4 (20120320/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_GPE.GPIO 5 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:00:1b.0: irq 103 for MSI/MSI-X
type=1400 audit(1384551741.836:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=837 comm="apparmor_parser"
type=1400 audit(1384551741.836:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=837 comm="apparmor_parser"
type=1400 audit(1384551741.836:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=837 comm="apparmor_parser"
type=1400 audit(1384551741.840:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=854 comm="apparmor_parser"
type=1400 audit(1384551741.840:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=854 comm="apparmor_parser"
type=1400 audit(1384551741.840:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=854 comm="apparmor_parser"
EDAC MC: Ver: 2.1.0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x70d
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
hda_intel: Disabling MSI
hda-intel: 0000:03:00.1: Handle VGA-switcheroo audio client
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x70d
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x70d
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x70d
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x70d
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x70d
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x70d
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x70d
microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x70d
microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x70d
microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x70d
microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x70d
microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x70d
microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x70d
microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x70d
microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x70d
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input16
EXT4-fs (sdc2): re-mounted. Opts: errors=remount-ro
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc6): mounted filesystem with ordered data mode. Opts: (null)
init: udev-fallback-graphics main process (1332) terminated with status 1
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
Adding 6136792k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:6136792k
EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (1439) killed by TERM signal
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1384551756.828:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1546 comm="apparmor_parser"
type=1400 audit(1384551756.828:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1546 comm="apparmor_parser"
type=1400 audit(1384551756.836:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1580 comm="apparmor_parser"
type=1400 audit(1384551756.836:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1586 comm="apparmor_parser"
type=1400 audit(1384551756.836:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1579 comm="apparmor_parser"
type=1400 audit(1384551756.836:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1580 comm="apparmor_parser"
type=1400 audit(1384551756.836:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1580 comm="apparmor_parser"
type=1400 audit(1384551756.836:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1579 comm="apparmor_parser"
type=1400 audit(1384551756.836:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1583 comm="apparmor_parser"
type=1400 audit(1384551756.836:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1584 comm="apparmor_parser"
vboxdrv: Found 16 processor cores.
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: fAsync=0 offMin=0x20c offMax=0x1417c
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.2 (interface 0x001a0005).
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
vboxpci: IOMMU not found (not registered)
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:07:00.0: eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
device eth1 entered promiscuous mode
device eth1 left promiscuous mode
device eth1 entered promiscuous mode