dmesg - zz-zanzi-20131109-crypt-luks
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-56-generic (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #86-Ubuntu SMP Wed Oct 23 09:20:45 UTC 2013 (Ubuntu 3.2.0-56.86-generic 3.2.51)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
[ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff9e000 - 00000000cffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Dell Inc. Studio Slim 540s/0M017G, BIOS 1.0.12 05/11/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FF0000000 write-back
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 4608MB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 4, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 4096M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 4, base: 4608MB, range: 256MB, type WB
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff90000 page 4k
[ 0.000000] kernel direct mapping tables up to cff90000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ cff8e000-cff90000
[ 0.000000] RAMDISK: 35822000 - 36c09000
[ 0.000000] ACPI: RSDP 00000000000f9cd0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cff90000 00044 (v01 DELL AS09 20090511 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff90200 00084 (v01 051109 FACP1620 20090511 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff905c0 05270 (v01 1ADXP 1ADXP005 00000005 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cff9e000 00040
[ 0.000000] ACPI: APIC 00000000cff90390 0006C (v01 051109 APIC1620 20090511 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff90400 0003C (v01 051109 OEMMCFG 20090511 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000cff90440 00176 (v01 DELL AS09 20090511 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff9e040 00072 (v01 051109 OEMB1620 20090511 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff985c0 00038 (v01 051109 OEMHPET 20090511 MSFT 00000097)
[ 0.000000] ACPI: GSCI 00000000cff9e0c0 02024 (v01 051109 GMCHSCI 20090511 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cffa1060 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cff90
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048351
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831440 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 193536 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cff9e000
[ 0.000000] PM: Registered nosave memory: 00000000cff9e000 - 00000000cffe0000
[ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83136 r8192 d23360 u524288
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028890
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4025148k/4980736k available (6585k kernel code, 787332k absent, 168256k reserved, 6620k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2666.345 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.69 BogoMIPS (lpj=10665380)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004032] Security Framework initialized
[ 0.004047] AppArmor: AppArmor initialized
[ 0.004048] Yama: becoming mindful.
[ 0.004363] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009088] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009859] Mount-cache hash table entries: 256
[ 0.009998] Initializing cgroup subsys cpuacct
[ 0.010004] Initializing cgroup subsys memory
[ 0.010013] Initializing cgroup subsys devices
[ 0.010015] Initializing cgroup subsys freezer
[ 0.010017] Initializing cgroup subsys blkio
[ 0.010023] Initializing cgroup subsys perf_event
[ 0.010050] CPU: Physical Processor ID: 0
[ 0.010051] CPU: Processor Core ID: 0
[ 0.010054] mce: CPU supports 6 MCE banks
[ 0.010062] CPU0: Thermal monitoring enabled (TM2)
[ 0.010065] using mwait in idle threads.
[ 0.012412] ACPI: Core revision 20110623
[ 0.016011] ftrace: allocating 26595 entries in 105 pages
[ 0.020399] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062796] CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.064003] APIC calibration not consistent with PM-Timer: 135ms instead of 100ms
[ 0.064003] APIC delta adjusted to PM-Timer: 2083094 (2832971)
[ 0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.064003] ... version: 2
[ 0.064003] ... bit width: 40
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 000000ffffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 3
[ 0.064003] ... event mask: 0000000700000003
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 9a000
[ 0.152034] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152138] #2
[ 0.152140] smpboot cpu 2: start_ip = 9a000
[ 0.244031] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.244108] #3 Ok.
[ 0.244110] smpboot cpu 3: start_ip = 9a000
[ 0.336037] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.336061] Brought up 4 CPUs
[ 0.336064] Total of 4 processors activated (21330.88 BogoMIPS).
[ 0.339550] devtmpfs: initialized
[ 0.340761] EVM: security.selinux
[ 0.340763] EVM: security.SMACK64
[ 0.340764] EVM: security.capability
[ 0.340796] PM: Registering ACPI NVS region at cff9e000 (270336 bytes)
[ 0.340796] print_constraints: dummy:
[ 0.340796] RTC time: 17:12:14, date: 11/10/13
[ 0.340796] NET: Registered protocol family 16
[ 0.340827] Trying to unpack rootfs image as initramfs...
[ 0.340924] ACPI: bus type pci registered
[ 0.340980] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.340982] PCI: not using MMCONFIG
[ 0.340984] PCI: Using configuration type 1 for base access
[ 0.341832] bio: create slab at 0
[ 0.341832] ACPI: Added _OSI(Module Device)
[ 0.341832] ACPI: Added _OSI(Processor Device)
[ 0.341832] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.341832] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.341832] ACPI: EC: Look up EC in DSDT
[ 0.344596] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.346224] ACPI: SSDT 00000000cffa00f0 00235 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.346429] ACPI: Dynamic OEM Table Load:
[ 0.346432] ACPI: SSDT (null) 00235 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.346527] ACPI: SSDT 00000000cffa09f0 004B2 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.346720] ACPI: Dynamic OEM Table Load:
[ 0.346722] ACPI: SSDT (null) 004B2 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.346891] ACPI: SSDT 00000000cffa0330 00235 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.347097] ACPI: Dynamic OEM Table Load:
[ 0.347099] ACPI: SSDT (null) 00235 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.347173] ACPI: SSDT 00000000cffa0eb0 00085 (v01 PmRef P002Cst 00003000 INTL 20051117)
[ 0.347370] ACPI: Dynamic OEM Table Load:
[ 0.347373] ACPI: SSDT (null) 00085 (v01 PmRef P002Cst 00003000 INTL 20051117)
[ 0.347544] ACPI: SSDT 00000000cffa0570 00235 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 0.347750] ACPI: Dynamic OEM Table Load:
[ 0.347753] ACPI: SSDT (null) 00235 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 0.347825] ACPI: SSDT 00000000cffa0f40 00085 (v01 PmRef P003Cst 00003000 INTL 20051117)
[ 0.348028] ACPI: Dynamic OEM Table Load:
[ 0.348030] ACPI: SSDT (null) 00085 (v01 PmRef P003Cst 00003000 INTL 20051117)
[ 0.348199] ACPI: SSDT 00000000cffa07b0 00235 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 0.348407] ACPI: Dynamic OEM Table Load:
[ 0.348409] ACPI: SSDT (null) 00235 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 0.348481] ACPI: SSDT 00000000cffa0fd0 00085 (v01 PmRef P004Cst 00003000 INTL 20051117)
[ 0.348679] ACPI: Dynamic OEM Table Load:
[ 0.348681] ACPI: SSDT (null) 00085 (v01 PmRef P004Cst 00003000 INTL 20051117)
[ 0.348786] ACPI: Interpreter enabled
[ 0.348789] ACPI: (supports S0 S3 S4 S5)
[ 0.348804] ACPI: Using IOAPIC for interrupt routing
[ 0.348824] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.349247] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.388013] ACPI: No dock devices found.
[ 0.388029] HEST: Table not found.
[ 0.388033] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.388161] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.388297] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.388299] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.388302] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.388304] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.388306] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.388308] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 0.388319] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.388337] DMAR: Forcing write-buffer flush capability
[ 0.388339] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.388359] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[ 0.388389] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.388393] pci 0000:00:01.0: PME# disabled
[ 0.388425] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.388464] pci 0000:00:1a.0: reg 20: [io 0xcc00-0xcc1f]
[ 0.388510] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.388546] pci 0000:00:1a.1: reg 20: [io 0xc880-0xc89f]
[ 0.388590] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.388626] pci 0000:00:1a.2: reg 20: [io 0xc800-0xc81f]
[ 0.388680] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.388699] pci 0000:00:1a.7: reg 10: [mem 0xfe7ffc00-0xfe7fffff]
[ 0.388777] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.388781] pci 0000:00:1a.7: PME# disabled
[ 0.388802] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.388815] pci 0000:00:1b.0: reg 10: [mem 0xfe7f8000-0xfe7fbfff 64bit]
[ 0.388873] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.388877] pci 0000:00:1b.0: PME# disabled
[ 0.388893] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.388951] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.388955] pci 0000:00:1c.0: PME# disabled
[ 0.388974] pci 0000:00:1c.2: [8086:3a44] type 1 class 0x000604
[ 0.389034] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.389037] pci 0000:00:1c.2: PME# disabled
[ 0.389057] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[ 0.389114] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.389118] pci 0000:00:1c.5: PME# disabled
[ 0.389137] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.389175] pci 0000:00:1d.0: reg 20: [io 0xc480-0xc49f]
[ 0.389220] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.389256] pci 0000:00:1d.1: reg 20: [io 0xc400-0xc41f]
[ 0.389302] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.389338] pci 0000:00:1d.2: reg 20: [io 0xc080-0xc09f]
[ 0.389390] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.389408] pci 0000:00:1d.7: reg 10: [mem 0xfe7ff800-0xfe7ffbff]
[ 0.389486] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.389490] pci 0000:00:1d.7: PME# disabled
[ 0.389507] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.389561] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 0.389633] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.389676] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[ 0.389688] pci 0000:00:1f.2: reg 10: [io 0xc000-0xc007]
[ 0.389695] pci 0000:00:1f.2: reg 14: [io 0xbc00-0xbc03]
[ 0.389702] pci 0000:00:1f.2: reg 18: [io 0xb880-0xb887]
[ 0.389709] pci 0000:00:1f.2: reg 1c: [io 0xb800-0xb803]
[ 0.389715] pci 0000:00:1f.2: reg 20: [io 0xb480-0xb48f]
[ 0.389722] pci 0000:00:1f.2: reg 24: [io 0xb400-0xb40f]
[ 0.389764] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.389777] pci 0000:00:1f.3: reg 10: [mem 0xfe7ff400-0xfe7ff4ff 64bit]
[ 0.389794] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.389823] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[ 0.389836] pci 0000:00:1f.5: reg 10: [io 0xb000-0xb007]
[ 0.389843] pci 0000:00:1f.5: reg 14: [io 0xac00-0xac03]
[ 0.389849] pci 0000:00:1f.5: reg 18: [io 0xa880-0xa887]
[ 0.389856] pci 0000:00:1f.5: reg 1c: [io 0xa800-0xa803]
[ 0.389863] pci 0000:00:1f.5: reg 20: [io 0xa480-0xa48f]
[ 0.389869] pci 0000:00:1f.5: reg 24: [io 0xa400-0xa40f]
[ 0.389934] pci 0000:01:00.0: [1002:954f] type 0 class 0x000300
[ 0.389947] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.389956] pci 0000:01:00.0: reg 18: [mem 0xfe8f0000-0xfe8fffff 64bit]
[ 0.389963] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.389974] pci 0000:01:00.0: reg 30: [mem 0xfe8c0000-0xfe8dffff pref]
[ 0.390001] pci 0000:01:00.0: supports D1 D2
[ 0.390018] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
[ 0.390029] pci 0000:01:00.1: reg 10: [mem 0xfe8ec000-0xfe8effff 64bit]
[ 0.390081] pci 0000:01:00.1: supports D1 D2
[ 0.390110] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.390113] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.390115] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.390119] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.390171] pci 0000:02:00.0: [14e4:4328] type 0 class 0x000280
[ 0.390192] pci 0000:02:00.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[ 0.390209] pci 0000:02:00.0: reg 18: [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.390299] pci 0000:02:00.0: supports D1 D2
[ 0.390301] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.390305] pci 0000:02:00.0: PME# disabled
[ 0.396046] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.396052] pci 0000:00:1c.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.396057] pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.396114] pci 0000:03:00.0: [197b:2380] type 0 class 0x000c00
[ 0.396136] pci 0000:03:00.0: reg 10: [mem 0xfeaff800-0xfeafffff]
[ 0.396151] pci 0000:03:00.0: reg 14: [mem 0xfeaff400-0xfeaff47f]
[ 0.396194] pci 0000:03:00.0: reg 20: [mem 0xfeaff000-0xfeaff07f]
[ 0.396210] pci 0000:03:00.0: reg 24: [mem 0xfeafec00-0xfeafec7f]
[ 0.404043] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.404049] pci 0000:00:1c.2: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.404105] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.404122] pci 0000:04:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.404147] pci 0000:04:00.0: reg 18: [mem 0xfebff000-0xfebfffff 64bit]
[ 0.404164] pci 0000:04:00.0: reg 20: [mem 0xfdff0000-0xfdffffff 64bit pref]
[ 0.404175] pci 0000:04:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.404236] pci 0000:04:00.0: supports D1 D2
[ 0.404237] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.404243] pci 0000:04:00.0: PME# disabled
[ 0.412042] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.412046] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.412050] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.412055] pci 0000:00:1c.5: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.412110] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.412119] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.412121] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.412124] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.412126] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.412128] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.412130] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.412157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.412255] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.412319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.412346] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.412368] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.412459] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.412566] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.419002] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.419042] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.419077] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.419114] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.419151] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 0.419187] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.419225] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.419263] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.419361] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.419361] vgaarb: loaded
[ 0.419361] vgaarb: bridge control possible 0000:01:00.0
[ 0.419361] i2c-core: driver [aat2870] using legacy suspend method
[ 0.419361] i2c-core: driver [aat2870] using legacy resume method
[ 0.419361] SCSI subsystem initialized
[ 0.419361] libata version 3.00 loaded.
[ 0.419361] usbcore: registered new interface driver usbfs
[ 0.419361] usbcore: registered new interface driver hub
[ 0.419361] usbcore: registered new device driver usb
[ 0.419361] PCI: Using ACPI for IRQ routing
[ 0.424939] PCI: pci_cache_line_size set to 64 bytes
[ 0.425022] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.425024] reserve RAM buffer: 00000000cff90000 - 00000000cfffffff
[ 0.425127] NetLabel: Initializing
[ 0.425129] NetLabel: domain hash size = 128
[ 0.425130] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.425142] NetLabel: unlabeled traffic allowed by default
[ 0.425170] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.425170] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.425170] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.435906] Switching to clocksource hpet
[ 0.439404] AppArmor: AppArmor Filesystem Enabled
[ 0.439439] pnp: PnP ACPI init
[ 0.439461] ACPI: bus type pnp registered
[ 0.439563] pnp 00:00: [bus 00-ff]
[ 0.439565] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.439567] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.439569] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.439571] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.439573] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.439575] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.439577] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
[ 0.439628] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.439637] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.439639] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.439696] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.439699] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.439702] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.439732] pnp 00:02: [dma 4]
[ 0.439734] pnp 00:02: [io 0x0000-0x000f]
[ 0.439736] pnp 00:02: [io 0x0081-0x0083]
[ 0.439737] pnp 00:02: [io 0x0087]
[ 0.439739] pnp 00:02: [io 0x0089-0x008b]
[ 0.439740] pnp 00:02: [io 0x008f]
[ 0.439742] pnp 00:02: [io 0x00c0-0x00df]
[ 0.439765] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.439777] pnp 00:03: [io 0x0070-0x0071]
[ 0.439788] pnp 00:03: [irq 8]
[ 0.439809] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.439817] pnp 00:04: [io 0x0061]
[ 0.439841] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.439849] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.439853] pnp 00:05: [irq 13]
[ 0.439879] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.439948] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.439950] pnp 00:06: [io 0x0a00-0x0adf]
[ 0.439989] system 00:06: [io 0x0a00-0x0adf] has been reserved
[ 0.439992] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.440108] pnp 00:07: [io 0x0010-0x001f]
[ 0.440110] pnp 00:07: [io 0x0022-0x003f]
[ 0.440111] pnp 00:07: [io 0x0044-0x005f]
[ 0.440113] pnp 00:07: [io 0x0062-0x0063]
[ 0.440115] pnp 00:07: [io 0x0065-0x006f]
[ 0.440116] pnp 00:07: [io 0x0072-0x007f]
[ 0.440118] pnp 00:07: [io 0x0080]
[ 0.440119] pnp 00:07: [io 0x0084-0x0086]
[ 0.440121] pnp 00:07: [io 0x0088]
[ 0.440122] pnp 00:07: [io 0x008c-0x008e]
[ 0.440124] pnp 00:07: [io 0x0090-0x009f]
[ 0.440126] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.440127] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.440129] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.440130] pnp 00:07: [io 0x0800-0x087f]
[ 0.440132] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.440134] pnp 00:07: [io 0x0500-0x057f]
[ 0.440136] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.440138] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[ 0.440139] pnp 00:07: [mem 0xfed40000-0xfed8ffff]
[ 0.440193] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.440195] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.440197] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.440200] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.440202] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.440204] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.440207] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.440252] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.440277] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.440335] pnp 00:09: [io 0x0060]
[ 0.440337] pnp 00:09: [io 0x0064]
[ 0.440339] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.440341] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.440381] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.440383] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.440386] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.440411] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.440449] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.440452] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.440574] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.440576] pnp 00:0b: [mem 0x000c0000-0x000cffff]
[ 0.440578] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.440580] pnp 00:0b: [mem 0x00100000-0xcfffffff]
[ 0.440582] pnp 00:0b: [mem 0xfed90000-0xffffffff]
[ 0.440628] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.440631] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.440633] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.440636] system 00:0b: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.440638] system 00:0b: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.440641] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.440740] pnp: PnP ACPI: found 12 devices
[ 0.440741] ACPI: ACPI bus type pnp unregistered
[ 0.448471] PCI: max bus depth: 1 pci_try_num: 2
[ 0.448512] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.448515] pci 0000:00:1c.2: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.448518] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.448521] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.448523] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.448527] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.448530] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.448533] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.448536] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.448540] pci 0000:00:1c.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.448544] pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.448549] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.448551] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.448555] pci 0000:00:1c.2: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.448559] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.448564] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.448567] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.448571] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.448574] pci 0000:00:1c.5: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.448580] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.448611] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.448614] pci 0000:00:01.0: setting latency timer to 64
[ 0.448620] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.448626] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.448630] pci 0000:00:1c.0: setting latency timer to 64
[ 0.448635] pci 0000:00:1c.2: enabling device (0106 -> 0107)
[ 0.448640] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.448644] pci 0000:00:1c.2: setting latency timer to 64
[ 0.448649] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.448653] pci 0000:00:1c.5: setting latency timer to 64
[ 0.448658] pci 0000:00:1e.0: setting latency timer to 64
[ 0.448662] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.448664] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.448666] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.448668] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.448670] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.448672] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.448674] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.448677] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.448679] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.448682] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.448685] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.448688] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.448691] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.448693] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.448696] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.448699] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.448702] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.448704] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.448707] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.448710] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.448712] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.448715] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.448718] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.448721] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.448766] NET: Registered protocol family 2
[ 0.448891] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.449671] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.452712] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.453138] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.453140] TCP reno registered
[ 0.453148] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.453181] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.453314] NET: Registered protocol family 1
[ 0.453342] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.453357] pci 0000:00:1a.0: PCI INT A disabled
[ 0.453374] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.453388] pci 0000:00:1a.1: PCI INT B disabled
[ 0.453395] pci 0000:00:1a.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 0.453409] pci 0000:00:1a.2: PCI INT D disabled
[ 0.453417] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.453445] pci 0000:00:1a.7: PCI INT C disabled
[ 0.453464] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.453478] pci 0000:00:1d.0: PCI INT A disabled
[ 0.453488] pci 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 0.453503] pci 0000:00:1d.1: PCI INT B disabled
[ 0.453509] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.453523] pci 0000:00:1d.2: PCI INT C disabled
[ 0.453531] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.453554] pci 0000:00:1d.7: PCI INT A disabled
[ 0.453569] pci 0000:01:00.0: Boot video device
[ 0.453580] PCI: CLS 32 bytes, default 64
[ 0.453583] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.453585] Placing 64MB software IO TLB between ffff8800cbf8e000 - ffff8800cff8e000
[ 0.453587] software IO TLB at phys 0xcbf8e000 - 0xcff8e000
[ 0.453997] audit: initializing netlink socket (disabled)
[ 0.454006] type=2000 audit(1384103533.448:1): initialized
[ 0.472379] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.474520] VFS: Disk quotas dquot_6.5.2
[ 0.474569] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.475018] fuse init (API version 7.17)
[ 0.475096] msgmni has been set to 7861
[ 0.475527] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.475570] io scheduler noop registered
[ 0.475572] io scheduler deadline registered
[ 0.475601] io scheduler cfq registered (default)
[ 0.475696] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.475722] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.475779] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.475811] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.475890] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.475921] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.476016] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.476047] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.476139] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.476142] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.476143] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.476146] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.476163] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.476165] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.476169] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.476183] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.476185] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.476188] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.476202] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.476204] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.476208] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.476222] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.476256] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 3a40 ss_vid 1028 ss_did 2ac
[ 0.476276] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.476285] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 3a44 ss_vid 1028 ss_did 2ac
[ 0.476305] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 0.476314] pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 3a4a ss_vid 1028 ss_did 2ac
[ 0.476330] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
[ 0.476336] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.476388] intel_idle: MWAIT substates: 0x22220
[ 0.476389] intel_idle: does not run on family 6 model 23
[ 0.476474] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.476478] ACPI: Power Button [PWRB]
[ 0.476520] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.476523] ACPI: Power Button [PWRF]
[ 0.476654] Monitor-Mwait will be used to enter C-1 state
[ 0.476685] Monitor-Mwait will be used to enter C-2 state
[ 0.476699] Marking TSC unstable due to TSC halts in idle
[ 0.476708] ACPI: acpi_idle registered with cpuidle
[ 0.477963] ERST: Table is not found!
[ 0.477964] GHES: HEST is not enabled!
[ 0.665285] Freeing initrd memory: 20380k freed
[ 0.760380] Linux agpgart interface v0.103
[ 0.761768] brd: module loaded
[ 0.762444] loop: module loaded
[ 0.762581] ata_piix 0000:00:1f.2: version 2.13
[ 0.762599] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.762603] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.762639] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.762950] scsi0 : ata_piix
[ 0.763047] scsi1 : ata_piix
[ 0.763802] ata1: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 19
[ 0.763806] ata2: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 19
[ 0.763832] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.763837] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.763874] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.764102] scsi2 : ata_piix
[ 0.764190] scsi3 : ata_piix
[ 0.764862] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 0.764865] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 0.765173] Fixed MDIO Bus: probed
[ 0.765188] tun: Universal TUN/TAP device driver, 1.6
[ 0.765190] tun: (C) 1999-2004 Max Krasnyansky
[ 0.765235] PPP generic driver version 2.4.2
[ 0.765316] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.765328] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.765359] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.765363] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.765400] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.765422] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.769305] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.769317] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[ 0.784015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.784165] hub 1-0:1.0: USB hub found
[ 0.784170] hub 1-0:1.0: 6 ports detected
[ 0.784243] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.784253] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.784256] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.784295] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.784316] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.788195] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.788208] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[ 0.804013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.804131] hub 2-0:1.0: USB hub found
[ 0.804136] hub 2-0:1.0: 6 ports detected
[ 0.804216] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.804227] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.804240] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.804246] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.804248] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.804287] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.804316] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000cc00
[ 0.804421] hub 3-0:1.0: USB hub found
[ 0.804425] hub 3-0:1.0: 2 ports detected
[ 0.804478] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.804483] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.804486] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.804528] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.804554] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
[ 0.804657] hub 4-0:1.0: USB hub found
[ 0.804661] hub 4-0:1.0: 2 ports detected
[ 0.804714] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 0.804719] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.804722] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.804760] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.804779] uhci_hcd 0000:00:1a.2: irq 21, io base 0x0000c800
[ 0.804882] hub 5-0:1.0: USB hub found
[ 0.804885] hub 5-0:1.0: 2 ports detected
[ 0.804938] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.804944] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.804947] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.804983] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.805003] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[ 0.805109] hub 6-0:1.0: USB hub found
[ 0.805112] hub 6-0:1.0: 2 ports detected
[ 0.805169] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 0.805175] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.805177] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.805221] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.805249] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000c400
[ 0.805352] hub 7-0:1.0: USB hub found
[ 0.805355] hub 7-0:1.0: 2 ports detected
[ 0.805408] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.805413] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.805416] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.805452] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.805472] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c080
[ 0.805573] hub 8-0:1.0: USB hub found
[ 0.805576] hub 8-0:1.0: 2 ports detected
[ 0.805672] usbcore: registered new interface driver libusual
[ 0.805703] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.807898] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.807907] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.808113] mousedev: PS/2 mouse device common for all mice
[ 0.808322] rtc_cmos 00:03: RTC can wake from S4
[ 0.808451] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.808473] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.808555] device-mapper: uevent: version 1.0.3
[ 0.808641] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 0.808721] cpuidle: using governor ladder
[ 0.808839] cpuidle: using governor menu
[ 0.808841] EFI Variables Facility v0.08 2004-May-17
[ 0.809066] TCP cubic registered
[ 0.809160] NET: Registered protocol family 10
[ 0.809576] NET: Registered protocol family 17
[ 0.809580] Registering the dns_resolver key type
[ 0.809791] PM: Hibernation image not present or could not be loaded.
[ 0.809804] registered taskstats version 1
[ 0.816019] Magic number: 5:752:238
[ 0.816146] rtc_cmos 00:03: setting system clock to 2013-11-10 17:12:14 UTC (1384103534)
[ 0.816787] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.816789] EDD information not available.
[ 1.094587] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.212036] usb 1-6: new high-speed USB device number 4 using ehci_hcd
[ 1.248066] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.256142] ata3.00: ATAPI: Optiarc DVD+/-RW AD-7200S, 102A, max UDMA/100
[ 1.272139] ata3.00: configured for UDMA/100
[ 1.346868] Initializing USB Mass Storage driver...
[ 1.347044] scsi4 : usb-storage 1-6:1.0
[ 1.347109] usbcore: registered new interface driver usb-storage
[ 1.347111] USB Mass Storage support registered.
[ 1.456029] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.560077] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.560088] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.560213] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.560230] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.568597] ata1.00: ATA-8: WDC WD6400AAKS-75A7B2, 01.03B01, max UDMA/133
[ 1.568601] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.568877] ata2.00: ATA-8: WDC WD6400AAKS-75A7B2, 01.03B01, max UDMA/133
[ 1.568880] ata2.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.584665] ata1.00: configured for UDMA/133
[ 1.584790] scsi 0:0:0:0: Direct-Access ATA WDC WD6400AAKS-7 01.0 PQ: 0 ANSI: 5
[ 1.584863] ata2.00: configured for UDMA/133
[ 1.584916] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 1.584947] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.584968] sd 0:0:0:0: [sda] Write Protect is off
[ 1.584971] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.585011] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.585157] scsi 1:0:0:0: Direct-Access ATA WDC WD6400AAKS-7 01.0 PQ: 0 ANSI: 5
[ 1.585262] sd 1:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 1.585293] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.585374] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.585377] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.585410] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.587025] scsi 2:0:0:0: CD-ROM Optiarc DVD+-RW AD-7200S 102A PQ: 0 ANSI: 5
[ 1.589312] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.589316] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.589443] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.589565] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 1.620138] sdb: sdb1 sdb2 sdb3 < sdb5 >
[ 1.620565] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.634844] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 1.635423] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.636851] Freeing unused kernel memory: 924k freed
[ 1.637045] Write protecting the kernel read-only data: 12288k
[ 1.641686] Freeing unused kernel memory: 1588k freed
[ 1.645448] Freeing unused kernel memory: 1188k freed
[ 1.646905] scsi5 : usb-storage 2-1:1.0
[ 1.661052] udevd[112]: starting version 175
[ 1.685412] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.685433] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.685462] r8169 0000:04:00.0: setting latency timer to 64
[ 1.685516] r8169 0000:04:00.0: irq 44 for MSI/MSI-X
[ 1.685899] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc90000648000, 00:21:70:5a:a6:c7, XID 1c4000c0 IRQ 44
[ 1.685902] r8169 0000:04:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 1.689460] firewire_ohci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.689470] firewire_ohci 0000:03:00.0: setting latency timer to 64
[ 1.695475] [drm] Initialized drm 1.1.0 20060810
[ 1.706092] [drm] radeon defaulting to kernel modesetting.
[ 1.706095] [drm] radeon kernel modesetting enabled.
[ 1.706155] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.706160] radeon 0000:01:00.0: setting latency timer to 64
[ 1.706341] [drm] initializing kernel modesetting (RV710 0x1002:0x954F 0x1028:0x904E).
[ 1.706367] [drm] register mmio base: 0xFE8F0000
[ 1.706369] [drm] register mmio size: 65536
[ 1.706501] ATOM BIOS: AHD4350LP2
[ 1.706524] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 1.706527] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 1.709235] [drm] Detected VRAM RAM=512M, BAR=256M
[ 1.709239] [drm] RAM width 64bits DDR
[ 1.709930] [TTM] Zone kernel: Available graphics memory: 2024614 kiB.
[ 1.709932] [TTM] Initializing pool allocator.
[ 1.709962] [drm] radeon: 512M of VRAM memory ready
[ 1.709964] [drm] radeon: 512M of GTT memory ready.
[ 1.709982] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.711784] [drm] Loading RV710 Microcode
[ 1.721646] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 1.721691] radeon 0000:01:00.0: WB enabled
[ 1.721694] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.721695] [drm] Driver supports precise vblank timestamp query.
[ 1.721731] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 1.721735] radeon 0000:01:00.0: radeon: using MSI.
[ 1.721763] [drm] radeon: irq initialized.
[ 1.752075] firewire_ohci: Added fw-ohci device 0000:03:00.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x10
[ 1.767659] [drm] ring test succeeded in 0 usecs
[ 1.767766] [drm] radeon: ib pool ready.
[ 1.767838] [drm] ib test succeeded in 0 usecs
[ 1.768341] [drm] Radeon Display Connectors
[ 1.768343] [drm] Connector 0:
[ 1.768344] [drm] VGA
[ 1.768351] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 1.768352] [drm] Encoders:
[ 1.768354] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 1.768355] [drm] Connector 1:
[ 1.768356] [drm] HDMI-A
[ 1.768357] [drm] HPD1
[ 1.768359] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 1.768360] [drm] Encoders:
[ 1.768362] [drm] DFP1: INTERNAL_UNIPHY
[ 1.768363] [drm] Connector 2:
[ 1.768364] [drm] DVI-I
[ 1.768365] [drm] HPD4
[ 1.768367] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[ 1.768368] [drm] Encoders:
[ 1.768369] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.768371] [drm] DFP2: INTERNAL_UNIPHY2
[ 1.768388] [drm] Internal thermal controller with fan control
[ 1.768441] [drm] radeon: power management initialized
[ 1.888040] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 1.938580] [drm] fb mappable at 0xD0142000
[ 1.938583] [drm] vram apper at 0xD0000000
[ 1.938585] [drm] size 5787648
[ 1.938586] [drm] fb depth is 24
[ 1.938587] [drm] pitch is 6400
[ 1.938682] fbcon: radeondrmfb (fb0) is primary device
[ 1.938738] Console: switching to colour frame buffer device 200x56
[ 1.938762] fb0: radeondrmfb frame buffer device
[ 1.938768] drm: registered panic notifier
[ 1.938775] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 2.137887] input: USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input2
[ 2.138062] generic-usb 0003:0D62:2106.0001: input,hidraw0: USB HID v1.10 Keyboard [USB Multimedia Keyboard] on usb-0000:00:1a.1-1/input0
[ 2.176658] input: USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input3
[ 2.176772] generic-usb 0003:0D62:2106.0002: input,hidraw1: USB HID v1.10 Device [USB Multimedia Keyboard] on usb-0000:00:1a.1-1/input1
[ 2.176800] usbcore: registered new interface driver usbhid
[ 2.176802] usbhid: USB HID core driver
[ 2.252147] firewire_core: created device fw0: GUID 002219915f484e1b, S400
[ 2.348043] usb 4-2: new low-speed USB device number 3 using uhci_hcd
[ 2.386404] scsi 4:0:0:0: Direct-Access ST950032 5AS PQ: 0 ANSI: 2 CCS
[ 2.386985] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2.387916] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.388644] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.388647] sd 4:0:0:0: [sdc] Mode Sense: 28 00 00 00
[ 2.389376] sd 4:0:0:0: [sdc] No Caching mode page present
[ 2.389379] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 2.391648] sd 4:0:0:0: [sdc] No Caching mode page present
[ 2.391651] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 2.392162] sdc: sdc1
[ 2.395017] sd 4:0:0:0: [sdc] No Caching mode page present
[ 2.395020] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 2.395024] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 2.543830] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4
[ 2.544000] generic-usb 0003:046D:C00C.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1a.1-2/input0
[ 2.654533] scsi 5:0:0:0: Direct-Access TEAC USB HS-CF Card 4.08 PQ: 0 ANSI: 0
[ 2.658157] scsi 5:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.08 PQ: 0 ANSI: 0
[ 2.661904] scsi 5:0:0:2: Direct-Access TEAC USB HS-MS Card 4.08 PQ: 0 ANSI: 0
[ 2.665030] scsi 5:0:0:3: Direct-Access TEAC USB HS-SD Card 4.08 PQ: 0 ANSI: 0
[ 2.665499] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 2.665634] sd 5:0:0:1: Attached scsi generic sg5 type 0
[ 2.666628] sd 5:0:0:2: Attached scsi generic sg6 type 0
[ 2.666767] sd 5:0:0:3: Attached scsi generic sg7 type 0
[ 2.784057] sd 5:0:0:3: [sdg] Attached SCSI removable disk
[ 2.788057] sd 5:0:0:1: [sde] Attached SCSI removable disk
[ 2.796660] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[ 2.804783] sd 5:0:0:2: [sdf] Attached SCSI removable disk
[ 2.984786] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 17.079970] Adding 7815616k swap on /dev/sdb2. Priority:-1 extents:1 across:7815616k
[ 17.084442] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.102275] udevd[390]: starting version 175
[ 17.142849] lib80211: common routines for IEEE802.11 drivers
[ 17.142853] lib80211_crypt: registered algorithm 'NULL'
[ 17.145606] cfg80211: Calling CRDA to update world regulatory domain
[ 17.147616] lp: driver loaded but no devices found
[ 17.150294] wl: module license 'MIXED/Proprietary' taints kernel.
[ 17.150298] Disabling lock debugging due to kernel taint
[ 17.165799] wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.165807] wl 0000:02:00.0: setting latency timer to 64
[ 17.168112] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[ 17.185574] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185578] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185580] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185582] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185584] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185587] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185589] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185591] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185593] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185595] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185597] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185599] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185601] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185604] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185606] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185608] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185610] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185612] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185614] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185617] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185618] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185621] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185623] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185625] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185627] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185629] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185631] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185634] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 17.185635] cfg80211: Disabling freq 5170 MHz
[ 17.185637] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185639] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185641] cfg80211: Updating information on frequency 5190 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185644] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185645] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185648] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185650] cfg80211: Updating information on frequency 5210 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185652] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185654] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185656] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185658] cfg80211: Updating information on frequency 5230 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185660] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185662] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185665] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185666] cfg80211: Disabling freq 5260 MHz
[ 17.185668] cfg80211: Disabling freq 5280 MHz
[ 17.185669] cfg80211: Disabling freq 5300 MHz
[ 17.185671] cfg80211: Disabling freq 5320 MHz
[ 17.185672] cfg80211: Disabling freq 5500 MHz
[ 17.185673] cfg80211: Disabling freq 5520 MHz
[ 17.185674] cfg80211: Disabling freq 5540 MHz
[ 17.185676] cfg80211: Disabling freq 5560 MHz
[ 17.185677] cfg80211: Disabling freq 5580 MHz
[ 17.185678] cfg80211: Disabling freq 5600 MHz
[ 17.185680] cfg80211: Disabling freq 5620 MHz
[ 17.185681] cfg80211: Disabling freq 5640 MHz
[ 17.185682] cfg80211: Disabling freq 5660 MHz
[ 17.185684] cfg80211: Disabling freq 5680 MHz
[ 17.185685] cfg80211: Disabling freq 5700 MHz
[ 17.185686] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185689] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185691] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185693] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185695] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185697] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185699] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185702] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185704] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[ 17.185706] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 17.185708] cfg80211: Disabling freq 5920 MHz
[ 17.185709] cfg80211: Disabling freq 5940 MHz
[ 17.185710] cfg80211: Disabling freq 5960 MHz
[ 17.185711] cfg80211: Disabling freq 5980 MHz
[ 17.185713] cfg80211: Disabling freq 6000 MHz
[ 17.185714] cfg80211: Disabling freq 6020 MHz
[ 17.185715] cfg80211: Disabling freq 6040 MHz
[ 17.185717] cfg80211: Disabling freq 6060 MHz
[ 17.185718] cfg80211: Disabling freq 6080 MHz
[ 17.187230] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 17.190514] lib80211_crypt: registered algorithm 'TKIP'
[ 17.234572] eth1: Broadcom BCM4328 802.11 Hybrid Wireless Controller 6.20.155.1 (r326264)
[ 17.262916] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 17.262968] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 17.262994] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 17.320330] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 17.380594] init: failsafe main process (791) killed by TERM signal
[ 17.392867] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392872] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392874] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392876] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392878] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392881] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392882] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392885] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392887] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392889] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392891] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392894] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392895] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392898] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392900] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392902] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392904] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392906] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392908] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392911] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392912] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392915] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392917] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392919] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.392921] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392923] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.392925] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392928] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.392930] cfg80211: Disabling freq 5170 MHz
[ 17.392931] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392934] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392935] cfg80211: Updating information on frequency 5190 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392938] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392940] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392942] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392944] cfg80211: Updating information on frequency 5210 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392946] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392948] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392950] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392952] cfg80211: Updating information on frequency 5230 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392955] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392957] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392959] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392961] cfg80211: Disabling freq 5260 MHz
[ 17.392962] cfg80211: Disabling freq 5280 MHz
[ 17.392963] cfg80211: Disabling freq 5300 MHz
[ 17.392965] cfg80211: Disabling freq 5320 MHz
[ 17.392966] cfg80211: Disabling freq 5500 MHz
[ 17.392967] cfg80211: Disabling freq 5520 MHz
[ 17.392968] cfg80211: Disabling freq 5540 MHz
[ 17.392970] cfg80211: Disabling freq 5560 MHz
[ 17.392971] cfg80211: Disabling freq 5580 MHz
[ 17.392972] cfg80211: Disabling freq 5600 MHz
[ 17.392974] cfg80211: Disabling freq 5620 MHz
[ 17.392975] cfg80211: Disabling freq 5640 MHz
[ 17.392976] cfg80211: Disabling freq 5660 MHz
[ 17.392978] cfg80211: Disabling freq 5680 MHz
[ 17.392979] cfg80211: Disabling freq 5700 MHz
[ 17.392981] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392983] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392985] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392988] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392990] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392992] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392994] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[ 17.392996] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.392998] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[ 17.393000] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.393002] cfg80211: Disabling freq 5920 MHz
[ 17.393003] cfg80211: Disabling freq 5940 MHz
[ 17.393004] cfg80211: Disabling freq 5960 MHz
[ 17.393006] cfg80211: Disabling freq 5980 MHz
[ 17.393007] cfg80211: Disabling freq 6000 MHz
[ 17.393008] cfg80211: Disabling freq 6020 MHz
[ 17.393010] cfg80211: Disabling freq 6040 MHz
[ 17.393011] cfg80211: Disabling freq 6060 MHz
[ 17.393012] cfg80211: Disabling freq 6080 MHz
[ 17.393016] cfg80211: World regulatory domain updated:
[ 17.393017] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.393019] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.393022] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.393024] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.393026] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.393028] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.411827] Bluetooth: Core ver 2.16
[ 17.411852] NET: Registered protocol family 31
[ 17.411854] Bluetooth: HCI device and connection manager initialized
[ 17.411856] Bluetooth: HCI socket layer initialized
[ 17.411858] Bluetooth: L2CAP socket layer initialized
[ 17.411864] Bluetooth: SCO socket layer initialized
[ 17.415812] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.415815] Bluetooth: BNEP filters: protocol multicast
[ 17.444402] Bluetooth: RFCOMM TTY layer initialized
[ 17.444407] Bluetooth: RFCOMM socket layer initialized
[ 17.444409] Bluetooth: RFCOMM ver 1.11
[ 17.493427] ppdev: user-space parallel port driver
[ 17.553920] r8169 0000:04:00.0: eth0: link down
[ 17.554281] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.554512] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.807240] init: alsa-restore main process (1210) terminated with status 19
[ 19.094347] vboxdrv: Found 4 processor cores.
[ 19.095003] vboxdrv: fAsync=0 offMin=0x2a8 offMax=0x32f0
[ 19.095173] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 19.095176] vboxdrv: Successfully loaded version 4.2.18 (interface 0x001a0005).
[ 19.304246] vboxpci: IOMMU not found (not registered)
[ 20.312036] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x100f0000
[ 21.320024] hda-intel: No response from codec, disabling MSI: last cmd=0x100f0000
[ 22.328059] hda-intel: Codec #1 probe error; disabling it...
[ 23.714705] hda_codec: ALC888: BIOS auto-probing.
[ 23.724302] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 23.724478] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 23.724664] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 23.724776] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 23.724903] input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 23.725014] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 23.725132] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 23.725248] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 23.725983] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 23.726071] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
[ 23.726099] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 23.750051] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 23.750128] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 25.778299] EXT2-fs (sdc1): warning: mounting unchecked fs, running e2fsck is recommended
[ 25.989232] init: plymouth-stop pre-start process (2343) terminated with status 1
[ 33.520030] eth1: no IPv6 routers present
[11965.005003] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[14236.300476] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[14246.111214] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[14280.466709] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)