dmesg - test1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-27-generic (buildd@lamiak) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #46-Ubuntu SMP Mon Mar 25 19:58:17 UTC 2013 (Ubuntu 3.5.0-27.46-generic 3.5.7.7)
Command line: BOOT_IMAGE=/vmlinuz-3.5.0-27-generic root=/dev/mapper/xubuntu-root ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000099fff] usable
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfdffbff] usable
BIOS-e820: [mem 0x00000000bfdffc00-0x00000000bfe53bff] ACPI NVS
BIOS-e820: [mem 0x00000000bfe53c00-0x00000000bfe55bff] ACPI data
BIOS-e820: [mem 0x00000000bfe55c00-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Dell Inc. OptiPlex 960 /0Y958C, BIOS A05 07/31/2009
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DBFFF write-protect
DC000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0BFF00000 mask FFFF00000 uncachable
1 base 0C0000000 mask FC0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbfdff max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000094000] 94000 size 24576
init_memory_mapping: [mem 0x00000000-0xbfdfefff]
[mem 0x00000000-0xbfbfffff] page 2M
[mem 0xbfc00000-0xbfdfefff] page 4k
kernel direct mapping tables up to 0xbfdfefff @ [mem 0x1fffb000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x237ffffff]
[mem 0x100000000-0x237ffffff] page 2M
kernel direct mapping tables up to 0x237ffffff @ [mem 0xbfdf9000-0xbfdfefff]
RAMDISK: [mem 0x36184000-0x370b9fff]
ACPI: RSDP 00000000000fec00 00024 (v02 DELL )
ACPI: XSDT 00000000000fc7cc 0009C (v01 DELL B10K 00000015 ASL 00000061)
ACPI: FACP 00000000000fc8fc 000F4 (v03 DELL B10K 00000015 ASL 00000061)
ACPI: DSDT 00000000ffe9da54 054AD (v01 DELL dt_ex 00001000 INTL 20050624)
ACPI: FACS 00000000bfdffc00 00040
ACPI: SSDT 00000000ffea3020 000AA (v01 DELL st_ex 00001000 INTL 20050624)
ACPI: APIC 00000000000fc9f0 00092 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: BOOT 00000000000fca82 00028 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: ASF! 00000000000fcaaa 00096 (v32 DELL B10K 00000015 ASL 00000061)
ACPI: MCFG 00000000000fcb40 0003E (v01 DELL B10K 00000015 ASL 00000061)
ACPI: HPET 00000000000fcb7e 00038 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: TCPA 00000000000fcdda 00032 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: ____ 00000000000fce0c 00030 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: SLIC 00000000000fcbb6 00176 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: SSDT 00000000bfdffc40 001B7 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
ACPI: SSDT 00000000bfe00049 001B7 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
ACPI: SSDT 00000000bfe00452 001B7 (v01 DpgPmm Cpu2Ist 00000011 INTL 20050624)
ACPI: SSDT 00000000bfe0085b 001B7 (v01 DpgPmm Cpu3Ist 00000011 INTL 20050624)
ACPI: SSDT 00000000bfe00c64 00190 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
Initmem setup node 0 [mem 0x00000000-0x237ffffff]
NODE_DATA [mem 0x237ffc000-0x237ffffff]
[ffffea0000000000-ffffea0008dfffff] PMD -> [ffff88022f800000-ffff8802375fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x237ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x00099fff]
node 0: [mem 0x00100000-0xbfdfefff]
node 0: [mem 0x100000000-0x237ffffff]
On node 0 totalpages: 2063753
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3908 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 765503 pages, LIFO batch:31
Normal zone: 19968 pages used for memmap
Normal zone: 1257984 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009a000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000bfdff000 - 00000000bfe00000
PM: Registered nosave memory: 00000000bfe00000 - 00000000bfe53000
PM: Registered nosave memory: 00000000bfe53000 - 00000000bfe54000
PM: Registered nosave memory: 00000000bfe54000 - 00000000bfe55000
PM: Registered nosave memory: 00000000bfe55000 - 00000000bfe56000
PM: Registered nosave memory: 00000000bfe56000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000feda0000
PM: Registered nosave memory: 00000000feda0000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000
PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880237c00000 s83584 r8192 d22912 u262144
pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2027395
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.5.0-27-generic root=/dev/mapper/xubuntu-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8027596k/9306112k available (6710k kernel code, 1051100k absent, 227416k reserved, 6455k data, 932k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33030144 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2659.991 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.98 BogoMIPS (lpj=10639964)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25104 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (21279.92 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbfdffc00-0xbfe53bff] (344064 bytes)
dummy:
RTC time: 14:40:37, date: 10/25/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: ACPI Dock Station Driver: 1 docks/bays found
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Freeing initrd memory: 15576k freed
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff]
pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfec00000]
pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xff980000-0xff980fff]
pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff]
pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff]
pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfeda7fff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfec00000]
pci_bus 0000:00: root bus resource [mem 0xbff00000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xff980000-0xff980fff]
pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff]
pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfeda7fff]
pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: [8086:2e11] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
pci 0000:00:03.0: reg 10: [mem 0xfeda6000-0xfeda600f 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
pci 0000:00:03.2: reg 10: [io 0xfe80-0xfe87]
pci 0000:00:03.2: reg 14: [io 0xfe90-0xfe93]
pci 0000:00:03.2: reg 18: [io 0xfea0-0xfea7]
pci 0000:00:03.2: reg 1c: [io 0xfeb0-0xfeb3]
pci 0000:00:03.2: reg 20: [io 0xfef0-0xfeff]
pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
pci 0000:00:03.3: reg 10: [io 0xec98-0xec9f]
pci 0000:00:03.3: reg 14: [mem 0xfebd8000-0xfebd8fff]
pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
pci 0000:00:19.0: reg 10: [mem 0xfebe0000-0xfebfffff]
pci 0000:00:19.0: reg 14: [mem 0xfebd9000-0xfebd9fff]
pci 0000:00:19.0: reg 18: [io 0xecc0-0xecdf]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 20: [io 0xff20-0xff3f]
pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 20: [io 0xff00-0xff1f]
pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 20: [io 0xfc00-0xfc1f]
pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 10: [mem 0xfebda000-0xfebda3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xfebdc000-0xfebdffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3a72] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0xff80-0xff9f]
pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0xff60-0xff7f]
pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0xff40-0xff5f]
pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xff980000-0xff9803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07]
pci 0000:00:1f.2: reg 14: [io 0xfe10-0xfe13]
pci 0000:00:1f.2: reg 18: [io 0xfe20-0xfe27]
pci 0000:00:1f.2: reg 1c: [io 0xfe30-0xfe33]
pci 0000:00:1f.2: reg 20: [io 0xfec0-0xfedf]
pci 0000:00:1f.2: reg 24: [mem 0xff970000-0xff9707ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xfebdb000-0xfebdb0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xece0-0xecff]
pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe9e0000-0xfe9fffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xdc00-0xdcff]
pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfec00000] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xbff00000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xff980000-0xff980fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfeda7fff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:03.0: no compatible bridge window for [mem 0xfeda6000-0xfeda600f 64bit]
pci 0000:00:1f.2: no compatible bridge window for [mem 0xff970000-0xff9707ff]
Expanded resource reserved due to conflict with PCI Bus 0000:00
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbfdffc00-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 40 for MSI
hpet: hpet3 irq 41 for MSI
hpet: hpet4 irq 42 for MSI
hpet: hpet5 irq 43 for MSI
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xf0000000-0xfec00000 window]
pnp 00:00: [mem 0xbff00000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xefffffff window disabled]
pnp 00:00: [mem 0xff980000-0xff980fff window]
pnp 00:00: [mem 0xff97c000-0xff97ffff window]
pnp 00:00: [mem 0xfed20000-0xfed9ffff window]
pnp 00:00: [mem 0xfeda7000-0xfeda7fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0060]
pnp 00:01: [io 0x0064]
pnp 00:01: [io 0x0062-0x0063]
pnp 00:01: [io 0x0065-0x006f]
pnp 00:01: [io 0x00e0-0x00ef]
pnp 00:01: [io 0x0800-0x085f]
pnp 00:01: [io 0x0c00-0x0c7f]
pnp 00:01: [io 0x0860-0x08ff]
system 00:01: [io 0x0800-0x085f] has been reserved
system 00:01: [io 0x0c00-0x0c7f] has been reserved
system 00:01: [io 0x0860-0x08ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0080-0x009f]
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x00f0-0x00ff]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x0070-0x007f]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0378-0x037f]
pnp 00:06: [io 0x0778-0x077f]
pnp 00:06: [irq 7]
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:07: [io 0x03f8-0x03ff]
pnp 00:07: [irq 4]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [mem 0xfed40000-0xfed44fff]
pnp 00:08: [io 0x0cb0-0x0cbf]
pnp 00:08: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp 00:09: [mem 0xfed00000-0xfed003ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1f.2: BAR 5: assigned [mem 0xf0400000-0xf04007ff]
pci 0000:00:03.0: BAR 0: assigned [mem 0xf0400800-0xf040080f 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04-04]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfec00000]
pci_bus 0000:00: resource 10 [mem 0xbff00000-0xdfffffff]
pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff]
pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfeda7fff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfec00000]
pci_bus 0000:04: resource 10 [mem 0xbff00000-0xdfffffff]
pci_bus 0000:04: resource 11 [mem 0xff980000-0xff980fff]
pci_bus 0000:04: resource 12 [mem 0xff97c000-0xff97ffff]
pci_bus 0000:04: resource 13 [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:04: resource 14 [mem 0xfeda7000-0xfeda7fff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbdf9000-0xbfdf8fff] (64MB) mapped at [ffff8800bbdf9000-ffff8800bfdf8fff]
Simple Boot Flag at 0x7a set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1382712039.040:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 15709
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 46 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 47 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
0000:00:03.3: ttyS4 at I/O 0xec98 (irq = 17) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
pata_acpi 0000:00:03.2: setting latency timer to 64
ata_generic 0000:00:03.2: setting latency timer to 64
scsi0 : ata_generic
scsi1 : ata_generic
ata1: PATA max UDMA/100 cmd 0xfe80 ctl 0xfe90 bmdma 0xfef0 irq 18
ata2: PATA max UDMA/100 cmd 0xfea0 ctl 0xfeb0 bmdma 0xfef8 irq 18
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfebda000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-27-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-27-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.5.0-27-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.5.0-27-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.5.0-27-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.5.0-27-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.5.0-27-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.5.0-27-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 1:521:688
rtc_cmos 00:05: setting system clock to 2013-10-25 14:40:40 UTC (1382712040)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 932k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1136k freed
udevd[103]: starting version 175
e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:26:b9:79:d4:e8
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: 2021FF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 49 for MSI/MSI-X
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400100 irq 49
ata4: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400180 irq 49
ata5: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400200 irq 49
ata6: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400280 irq 49
ata7: DUMMY
ata8: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400380 irq 49
usb 3-1: new low-speed USB device number 2 using uhci_hcd
usb 3-1: New USB device found, idVendor=046d, idProduct=c063
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: DELL USB Laser Mouse
usb 3-1: Manufacturer: DELL
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: ATAPI: PLDS DVD+/-RW DH-16AAS, JD12, max UDMA/100
ata4.00: configured for UDMA/100
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
scsi 3:0:0:0: CD-ROM PLDS DVD+-RW DH-16AAS JD12 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input2
hid-generic 0003:046D:C063.0001: input,hidraw0: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1a.0-1/input0
usb 7-2: new low-speed USB device number 2 using uhci_hcd
usb 7-2: New USB device found, idVendor=413c, idProduct=2105
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: Dell USB Keyboard
usb 7-2: Manufacturer: Dell
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input3
hid-generic 0003:413C:2105.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-2/input0
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Adding 8253436k swap on /dev/mapper/xubuntu-swap_1. Priority:-1 extents:1 across:8253436k
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[525]: starting version 175
mei 0000:00:03.0: setting latency timer to 64
mei 0000:00:03.0: irq 50 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
ACPI Warning: 0x0000000000000860-0x000000000000087f SystemIO conflicts with Region \_SB_.PCI0.GRFX.TCOI 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \GLBC 1 (20120320/utaddress-251)
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SACT 2 (20120320/utaddress-251)
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SSTS 3 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000880-0x00000000000008ff SystemIO conflicts with Region \GIC2 1 (20120320/utaddress-251)
ACPI Warning: 0x0000000000000880-0x00000000000008ff SystemIO conflicts with Region \GIC1 2 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
lp: driver loaded but no devices found
wmi: Mapper loaded
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1028:0x2126).
[drm] register mmio base: 0xFE9E0000
[drm] register mmio size: 131072
ATOM BIOS: C09002
radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 4023356 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 51 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading CEDAR Microcode
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
type=1400 audit(1382712063.345:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=609 comm="apparmor_parser"
type=1400 audit(1382712063.345:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=609 comm="apparmor_parser"
type=1400 audit(1382712063.345:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=609 comm="apparmor_parser"
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
input: Dell WMI hotkeys as /devices/virtual/input/input4
ppdev: user-space parallel port driver
lp0: using parport0 (interrupt-driven).
tpm_tis 00:08: 1.2 TPM (device-id 0x4A10, rev-id 78)
microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88022bce5c00
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-I-1
[drm] HPD2
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm] DVI-I-2
[drm] HPD4
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 7299072
[drm] fb depth is 24
[drm] pitch is 6912
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0
init: failsafe main process (876) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1382712064.869:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=996 comm="apparmor_parser"
type=1400 audit(1382712064.869:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=996 comm="apparmor_parser"
type=1400 audit(1382712064.869:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=996 comm="apparmor_parser"
type=1400 audit(1382712064.873:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=993 comm="apparmor_parser"
type=1400 audit(1382712064.873:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=993 comm="apparmor_parser"
type=1400 audit(1382712064.873:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=999 comm="apparmor_parser"
type=1400 audit(1382712064.877:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1003 comm="apparmor_parser"
init: Failed to spawn whoopsie main process: unable to execute: No such file or directory
e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
Bridge firewalling registered
e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x278 offMax=0x4160
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.16 (interface 0x001a0005).
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
vboxpci: IOMMU not found (not registered)
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
init: plymouth-stop pre-start process (1642) terminated with status 1
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit_printk_skb: 33 callbacks suppressed
type=1400 audit(1382788864.577:23): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=7004 comm="apparmor_parser"
type=1400 audit(1382788864.577:24): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=7004 comm="apparmor_parser"