dmesg - primero
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
Command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dfecffff] usable
BIOS-e820: [mem 0x00000000dfed0000-0x00000000dfed0fff] ACPI NVS
BIOS-e820: [mem 0x00000000dfed1000-0x00000000dfedffff] ACPI data
BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfefffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000061fffffff] usable
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Gigabyte Technology Co., Ltd. X58A-UD3R/X58A-UD3R, BIOS FH 01/06/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x620000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CCFFF write-protect
CD000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 100000000 mask F00000000 write-back
3 base 200000000 mask E00000000 write-back
4 base 400000000 mask C00000000 write-back
5 base 500000000 mask F00000000 write-back
6 base 600000000 mask FE0000000 write-back
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
reg 4, base: 16GB, range: 16GB, type WB
reg 5, base: 20GB, range: 4GB, type WB
reg 6, base: 24GB, range: 512MB, type WB
total RAM covered: 32256M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1G num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
reg 4, base: 16GB, range: 16GB, type WB
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdfed0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5f00-0x000f5f0f] mapped at [ffff8800000f5f00]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0xdfecffff]
[mem 0x00000000-0xdfdfffff] page 2M
[mem 0xdfe00000-0xdfecffff] page 4k
kernel direct mapping tables up to 0xdfecffff @ [mem 0x1fffa000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x61fffffff]
[mem 0x100000000-0x61fffffff] page 2M
kernel direct mapping tables up to 0x61fffffff @ [mem 0xdfeb6000-0xdfecffff]
RAMDISK: [mem 0x7efb0000-0x7fffffff]
ACPI: RSDP 00000000000f76a0 00014 (v00 GBT )
ACPI: RSDT 00000000dfed1040 00048 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000dfed1100 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000dfed11c0 05975 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 00000000dfed0000 00040
ACPI: MSDM 00000000dfed6d00 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 00000000dfed6dc0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000dfed6e40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 00000000dfed6e80 004D0 (v01 GBT 00000000 00000000)
ACPI: MATS 00000000dfed7350 00034 (v01 GBT 00000000 00000000)
ACPI: TAMG 00000000dfed73c0 00CFA (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 00000000dfed6b80 0012C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 00000000dfed80c0 02B1C (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000061fffffff]
Initmem setup node 0 [mem 0x00000000-0x61fffffff]
NODE_DATA [mem 0x61fffc000-0x61fffffff]
[ffffea0000000000-ffffea00187fffff] PMD -> [ffff880607600000-ffff88061f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x61fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0xdfecffff]
node 0: [mem 0x100000000-0x61fffffff]
On node 0 totalpages: 6291039
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 896784 pages, LIFO batch:31
Normal zone: 83968 pages used for memmap
Normal zone: 5289984 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000dfed0000 - 00000000dfed1000
PM: Registered nosave memory: 00000000dfed1000 - 00000000dfee0000
PM: Registered nosave memory: 00000000dfee0000 - 00000000dff00000
PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
e820: [mem 0xdff00000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88061fc00000 s83584 r8192 d22912 u131072
pcpu-alloc: s83584 r8192 d22912 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6190681
Policy zone: Normal
Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 24670448k/25690112k available (6711k kernel code, 525956k absent, 493708k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:808 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 100663296 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3064.325 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6128.65 BogoMIPS (lpj=12257300)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
CPU erratum AAJ80 worked around
CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7
Brought up 8 CPUs
Total of 8 processors activated (49029.20 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdfed0000-0xdfed0fff] (4096 bytes)
dummy:
RTC time: 11:56:52, date: 10/02/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI Warning: Incorrect checksum in table [TAMG] - 0x42, should be 0x41 (20120320/tbutils-323)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A03:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: >host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: >host bridge window [mem 0xdff00000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0xdff00000-0xfebfffff]
pci 0000:00:00.0: >[8086:3405] type 00 class 0x060000
pci 0000:00:00.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: >[8086:3408] type 01 class 0x060400
pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: >[8086:3409] type 01 class 0x060400
pci 0000:00:02.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: >[8086:340a] type 01 class 0x060400
pci 0000:00:03.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: >[8086:3425] type 00 class 0x080000
pci 0000:00:10.1: >[8086:3426] type 00 class 0x080000
pci 0000:00:11.0: >[8086:3427] type 00 class 0x080000
pci 0000:00:11.1: >[8086:3428] type 00 class 0x080000
pci 0000:00:13.0: >[8086:342d] type 00 class 0x080020
pci 0000:00:13.0: >reg 10: [mem 0xfbfff000-0xfbffffff]
pci 0000:00:13.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: >[8086:342e] type 00 class 0x080000
pci 0000:00:14.1: >[8086:3422] type 00 class 0x080000
pci 0000:00:14.2: >[8086:3423] type 00 class 0x080000
pci 0000:00:15.0: >[8086:342f] type 00 class 0x080020
pci 0000:00:1a.0: >[8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: >reg 20: [io 0xff00-0xff1f]
pci 0000:00:1a.1: >[8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: >reg 20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.2: >[8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: >reg 20: [io 0xfd00-0xfd1f]
pci 0000:00:1a.7: >[8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: >reg 10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1a.7: >PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: >[8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: >reg 10: [mem 0xfbff8000-0xfbffbfff 64bit]
pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: >[8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: >[8086:3a42] type 01 class 0x060400
pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: >[8086:3a46] type 01 class 0x060400
pci 0000:00:1c.3: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: >[8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: >PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: >[8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: >reg 20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.1: >[8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: >reg 20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.2: >[8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: >reg 20: [io 0xfa00-0xfa1f]
pci 0000:00:1d.7: >[8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: >reg 10: [mem 0xfbffd000-0xfbffd3ff]
pci 0000:00:1d.7: >PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: >[8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: >[8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: >[8086:3a20] type 00 class 0x01018a
pci 0000:00:1f.2: >reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.2: >reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.2: >reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.2: >reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.2: >reg 20: [io 0xf900-0xf90f]
pci 0000:00:1f.2: >reg 24: [io 0xf800-0xf80f]
pci 0000:00:1f.3: >[8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: >reg 10: [mem 0xfbffc000-0xfbffc0ff 64bit]
pci 0000:00:1f.3: >reg 20: [io 0x0500-0x051f]
pci 0000:00:1f.5: >[8086:3a26] type 00 class 0x010185
pci 0000:00:1f.5: >reg 10: [io 0xf600-0xf607]
pci 0000:00:1f.5: >reg 14: [io 0xf500-0xf503]
pci 0000:00:1f.5: >reg 18: [io 0xf400-0xf407]
pci 0000:00:1f.5: >reg 1c: [io 0xf300-0xf303]
pci 0000:00:1f.5: >reg 20: [io 0xf200-0xf20f]
pci 0000:00:1f.5: >reg 24: [io 0xf100-0xf10f]
pci 0000:01:00.0: >[1b4b:91a3] type 00 class 0x01018f
pci 0000:01:00.0: >reg 10: [io 0xaf00-0xaf07]
pci 0000:01:00.0: >reg 14: [io 0xae00-0xae03]
pci 0000:01:00.0: >reg 18: [io 0xad00-0xad07]
pci 0000:01:00.0: >reg 1c: [io 0xac00-0xac03]
pci 0000:01:00.0: >reg 20: [io 0xab00-0xab0f]
pci 0000:01:00.0: >reg 24: [mem 0xfb9ff000-0xfb9ff7ff]
pci 0000:01:00.0: >reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.0: >PME# supported from D3hot
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: > bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:02:00.0: >[1033:0194] type 00 class 0x0c0330
pci 0000:02:00.0: >reg 10: [mem 0xfbbfe000-0xfbbfffff 64bit]
pci 0000:02:00.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: >PCI bridge to [bus 02-02]
pci 0000:00:02.0: > bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:03:00.0: >[10de:0e22] type 00 class 0x030000
pci 0000:03:00.0: >reg 10: [mem 0xf6000000-0xf7ffffff]
pci 0000:03:00.0: >reg 14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:03:00.0: >reg 1c: [mem 0xec000000-0xefffffff 64bit pref]
pci 0000:03:00.0: >reg 24: [io 0xbf00-0xbf7f]
pci 0000:03:00.0: >reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:03:00.1: >[10de:0beb] type 00 class 0x040300
pci 0000:03:00.1: >reg 10: [mem 0xf9ffc000-0xf9ffffff]
pci 0000:00:03.0: >PCI bridge to [bus 03-03]
pci 0000:00:03.0: > bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: > bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:03.0: > bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: >PCI bridge to [bus 04-04]
pci 0000:05:00.0: >[197b:2363] type 00 class 0x010185
pci 0000:05:00.0: >reg 24: [mem 0xfbefe000-0xfbefffff]
pci 0000:05:00.0: >PME# supported from D3hot
pci 0000:05:00.1: >[197b:2363] type 00 class 0x010185
pci 0000:05:00.1: >reg 10: [io 0xef00-0xef07]
pci 0000:05:00.1: >reg 14: [io 0xee00-0xee03]
pci 0000:05:00.1: >reg 18: [io 0xed00-0xed07]
pci 0000:05:00.1: >reg 1c: [io 0xec00-0xec03]
pci 0000:05:00.1: >reg 20: [io 0xeb00-0xeb0f]
pci 0000:05:00.0: >disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: >PCI bridge to [bus 05-05]
pci 0000:00:1c.1: > bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: > bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:06:00.0: >[197b:2363] type 00 class 0x010601
pci 0000:06:00.0: >reg 24: [mem 0xfbdfe000-0xfbdfffff]
pci 0000:06:00.0: >PME# supported from D3hot
pci 0000:06:00.1: >[197b:2363] type 00 class 0x010185
pci 0000:06:00.1: >reg 10: [io 0xdf00-0xdf07]
pci 0000:06:00.1: >reg 14: [io 0xde00-0xde03]
pci 0000:06:00.1: >reg 18: [io 0xdd00-0xdd07]
pci 0000:06:00.1: >reg 1c: [io 0xdc00-0xdc03]
pci 0000:06:00.1: >reg 20: [io 0xdb00-0xdb0f]
pci 0000:06:00.0: >disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: >PCI bridge to [bus 06-06]
pci 0000:00:1c.3: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: > bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:07:00.0: >[10ec:8168] type 00 class 0x020000
pci 0000:07:00.0: >reg 10: [io 0xce00-0xceff]
pci 0000:07:00.0: >reg 18: [mem 0xfbcff000-0xfbcfffff 64bit pref]
pci 0000:07:00.0: >reg 20: [mem 0xfbcf8000-0xfbcfbfff 64bit pref]
pci 0000:07:00.0: >supports D1 D2
pci 0000:07:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: >PCI bridge to [bus 07-07]
pci 0000:00:1c.4: > bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: > bridge window [mem 0xfbc00000-0xfbcfffff 64bit pref]
pci 0000:08:06.0: >[104c:8024] type 00 class 0x0c0010
pci 0000:08:06.0: >reg 10: [mem 0xfbaff000-0xfbaff7ff]
pci 0000:08:06.0: >reg 14: [mem 0xfbaf8000-0xfbafbfff]
pci 0000:08:06.0: >supports D1 D2
pci 0000:08:06.0: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: >PCI bridge to [bus 08-08] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1e.0: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: >root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: >root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:3f:00.0: >[8086:2c41] type 00 class 0x060000
pci 0000:3f:00.1: >[8086:2c01] type 00 class 0x060000
pci 0000:3f:02.0: >[8086:2c10] type 00 class 0x060000
pci 0000:3f:02.1: >[8086:2c11] type 00 class 0x060000
pci 0000:3f:03.0: >[8086:2c18] type 00 class 0x060000
pci 0000:3f:03.1: >[8086:2c19] type 00 class 0x060000
pci 0000:3f:03.4: >[8086:2c1c] type 00 class 0x060000
pci 0000:3f:04.0: >[8086:2c20] type 00 class 0x060000
pci 0000:3f:04.1: >[8086:2c21] type 00 class 0x060000
pci 0000:3f:04.2: >[8086:2c22] type 00 class 0x060000
pci 0000:3f:04.3: >[8086:2c23] type 00 class 0x060000
pci 0000:3f:05.0: >[8086:2c28] type 00 class 0x060000
pci 0000:3f:05.1: >[8086:2c29] type 00 class 0x060000
pci 0000:3f:05.2: >[8086:2c2a] type 00 class 0x060000
pci 0000:3f:05.3: >[8086:2c2b] type 00 class 0x060000
pci 0000:3f:06.0: >[8086:2c30] type 00 class 0x060000
pci 0000:3f:06.1: >[8086:2c31] type 00 class 0x060000
pci 0000:3f:06.2: >[8086:2c32] type 00 class 0x060000
pci 0000:3f:06.3: >[8086:2c33] type 00 class 0x060000
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdfed0000-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-3f]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000dffff window]
pnp 00:00: >[mem 0xdff00000-0xfebfffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: >[io 0x0010-0x001f]
pnp 00:01: >[io 0x0022-0x003f]
pnp 00:01: >[io 0x0044-0x005f]
pnp 00:01: >[io 0x0062-0x0063]
pnp 00:01: >[io 0x0065-0x006f]
pnp 00:01: >[io 0x0074-0x007f]
pnp 00:01: >[io 0x0091-0x0093]
pnp 00:01: >[io 0x00a2-0x00bf]
pnp 00:01: >[io 0x00e0-0x00ef]
pnp 00:01: >[io 0x04d0-0x04d1]
pnp 00:01: >[io 0x0290-0x029f]
pnp 00:01: >[io 0x0800-0x087f]
pnp 00:01: >[io 0x0290-0x0294]
pnp 00:01: >[io 0x0880-0x088f]
system 00:01: >[io 0x04d0-0x04d1] has been reserved
system 00:01: >[io 0x0290-0x029f] has been reserved
system 00:01: >[io 0x0800-0x087f] has been reserved
system 00:01: >[io 0x0290-0x0294] has been reserved
system 00:01: >[io 0x0880-0x088f] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: >[dma 4]
pnp 00:02: >[io 0x0000-0x000f]
pnp 00:02: >[io 0x0080-0x0090]
pnp 00:02: >[io 0x0094-0x009f]
pnp 00:02: >[io 0x00c0-0x00df]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: >[irq 0 disabled]
pnp 00:03: >[irq 8]
pnp 00:03: >[mem 0xfed00000-0xfed003ff]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: >[io 0x0070-0x0073]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: >[io 0x0061]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: >[io 0x00f0-0x00ff]
pnp 00:06: >[irq 13]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: >[io 0x0060]
pnp 00:07: >[io 0x0064]
pnp 00:07: >[irq 1]
pnp 00:07: >Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: >[io 0x0400-0x04cf]
pnp 00:08: >[io 0x04d2-0x04ff]
system 00:08: >[io 0x0400-0x04cf] has been reserved
system 00:08: >[io 0x04d2-0x04ff] has been reserved
system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: >[mem 0xf0000000-0xf3ffffff]
system 00:09: >[mem 0xf0000000-0xf3ffffff] has been reserved
system 00:09: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: >[mem 0x000d3000-0x000d3fff]
pnp 00:0a: >[mem 0x000f0000-0x000f7fff]
pnp 00:0a: >[mem 0x000f8000-0x000fbfff]
pnp 00:0a: >[mem 0x000fc000-0x000fffff]
pnp 00:0a: >[mem 0xdfed0000-0xdfedffff]
pnp 00:0a: >[mem 0x00000000-0x0009ffff]
pnp 00:0a: >[mem 0x00100000-0xdfecffff]
pnp 00:0a: >[mem 0xdfee0000-0xdfefffff]
pnp 00:0a: >[mem 0xfec00000-0xfec00fff]
pnp 00:0a: >[mem 0xfed10000-0xfed1dfff]
pnp 00:0a: >[mem 0xfed20000-0xfed8ffff]
pnp 00:0a: >[mem 0xfee00000-0xfee00fff]
pnp 00:0a: >[mem 0xffb00000-0xffb7ffff]
pnp 00:0a: >[mem 0xfff00000-0xffffffff]
pnp 00:0a: >[mem 0x000e0000-0x000effff]
system 00:0a: >[mem 0x000d3000-0x000d3fff] has been reserved
system 00:0a: >[mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0a: >[mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0a: >[mem 0x000fc000-0x000fffff] could not be reserved
system 00:0a: >[mem 0xdfed0000-0xdfedffff] could not be reserved
system 00:0a: >[mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: >[mem 0x00100000-0xdfecffff] could not be reserved
system 00:0a: >[mem 0xdfee0000-0xdfefffff] has been reserved
system 00:0a: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: >[mem 0xfed10000-0xfed1dfff] has been reserved
system 00:0a: >[mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0a: >[mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: >[mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0a: >[mem 0xfff00000-0xffffffff] has been reserved
system 00:0a: >[mem 0x000e0000-0x000effff] has been reserved
system 00:0a: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0b: >[mem 0xffb80000-0xffbfffff]
pnp 00:0b: >Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: >bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000
pci 0000:00:1c.0: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000
pci 0000:00:1c.0: >bridge window [mem 0x00100000-0x000fffff] to [bus 04-04] add_size 200000
pci 0000:00:1c.1: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 200000
pci 0000:00:1c.3: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-06] add_size 200000
pci 0000:00:1c.4: >bridge window [mem 0x00100000-0x000fffff] to [bus 07-07] add_size 400000
pci 0000:00:1c.0: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
pci 0000:00:1c.0: >res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:01.0: >BAR 15: assigned [mem 0xdff00000-0xdfffffff pref]
pci 0000:00:1c.0: >BAR 14: assigned [mem 0xf4000000-0xf41fffff]
pci 0000:00:1c.0: >BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref]
pci 0000:00:1c.1: >BAR 15: assigned [mem 0xf4400000-0xf45fffff 64bit pref]
pci 0000:00:1c.3: >BAR 15: assigned [mem 0xf4600000-0xf47fffff 64bit pref]
pci 0000:00:1c.4: >BAR 14: assigned [mem 0xf4800000-0xf4bfffff]
pci 0000:00:1c.0: >BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:01:00.0: >BAR 6: assigned [mem 0xdff00000-0xdff0ffff pref]
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: > bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:01.0: > bridge window [mem 0xdff00000-0xdfffffff pref]
pci 0000:00:02.0: >PCI bridge to [bus 02-02]
pci 0000:00:02.0: > bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:03:00.0: >BAR 6: assigned [mem 0xe8000000-0xe807ffff pref]
pci 0000:00:03.0: >PCI bridge to [bus 03-03]
pci 0000:00:03.0: > bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: > bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:03.0: > bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: >PCI bridge to [bus 04-04]
pci 0000:00:1c.0: > bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: > bridge window [mem 0xf4000000-0xf41fffff]
pci 0000:00:1c.0: > bridge window [mem 0xf4200000-0xf43fffff 64bit pref]
pci 0000:00:1c.1: >PCI bridge to [bus 05-05]
pci 0000:00:1c.1: > bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: > bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.1: > bridge window [mem 0xf4400000-0xf45fffff 64bit pref]
pci 0000:00:1c.3: >PCI bridge to [bus 06-06]
pci 0000:00:1c.3: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: > bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.3: > bridge window [mem 0xf4600000-0xf47fffff 64bit pref]
pci 0000:00:1c.4: >PCI bridge to [bus 07-07]
pci 0000:00:1c.4: > bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: > bridge window [mem 0xf4800000-0xf4bfffff]
pci 0000:00:1c.4: > bridge window [mem 0xfbc00000-0xfbcfffff 64bit pref]
pci 0000:00:1e.0: >PCI bridge to [bus 08-08]
pci 0000:00:1e.0: > bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1c.0: >enabling device (0000 -> 0003)
pci 0000:00:1e.0: >setting latency timer to 64
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: >resource 8 [mem 0xdff00000-0xfebfffff]
pci_bus 0000:01: >resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: >resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:01: >resource 2 [mem 0xdff00000-0xdfffffff pref]
pci_bus 0000:02: >resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:03: >resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: >resource 1 [mem 0xf6000000-0xf9ffffff]
pci_bus 0000:03: >resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:04: >resource 0 [io 0x1000-0x1fff]
pci_bus 0000:04: >resource 1 [mem 0xf4000000-0xf41fffff]
pci_bus 0000:04: >resource 2 [mem 0xf4200000-0xf43fffff 64bit pref]
pci_bus 0000:05: >resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: >resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:05: >resource 2 [mem 0xf4400000-0xf45fffff 64bit pref]
pci_bus 0000:06: >resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: >resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:06: >resource 2 [mem 0xf4600000-0xf47fffff 64bit pref]
pci_bus 0000:07: >resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: >resource 1 [mem 0xf4800000-0xf4bfffff]
pci_bus 0000:07: >resource 2 [mem 0xfbc00000-0xfbcfffff 64bit pref]
pci_bus 0000:08: >resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:08: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:08: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:08: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: >resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:08: >resource 8 [mem 0xdff00000-0xfebfffff]
pci_bus 0000:3f: >resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: >resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: >Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdbeb6000-0xdfeb5fff] (64MB) mapped at [ffff8800dbeb6000-ffff8800dfeb5fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1380715012.612:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 32768
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: >irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: >irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: >irq 42 for MSI/MSI-X
pcieport 0000:00:1c.4: >irq 43 for MSI/MSI-X
ioapic: probe of 0000:00:13.0 failed with error -22
ioapic: probe of 0000:00:15.0 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Refined TSC clocksource calibration: 3064.488 MHz.
Switching to clocksource tsc
Freeing initrd memory: 16704k freed
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:01:00.0: >version 3.0
ahci 0000:01:00.0: >irq 44 for MSI/MSI-X
ahci 0000:01:00.0: >controller can do FBS, turning on CAP_FBS
ahci 0000:01:00.0: >AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl IDE mode
ahci 0000:01:00.0: >flags: 64bit ncq fbs pio
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff100 irq 44
ata2: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff180 irq 44
ata3: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff200 irq 44
ata4: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff280 irq 44
ata5: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff300 irq 44
ata6: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff380 irq 44
ata7: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff400 irq 44
ata8: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff480 irq 44
ahci 0000:05:00.0: >AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: >flags: 64bit ncq pm led clo pmp pio slum part
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 17
ata10: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe180 irq 17
ahci 0000:06:00.0: >AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:06:00.0: >flags: 64bit ncq pm led clo pmp pio slum part
scsi10 : ahci
scsi11 : ahci
ata11: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 19
ata12: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 19
ata_piix 0000:00:1f.2: >version 2.13
ata_piix 0000:00:1f.2: >MAP [
P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: >setting latency timer to 64
scsi12 : ata_piix
scsi13 : ata_piix
ata13: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
ata14: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
ata_piix 0000:00:1f.5: >MAP [
P0 -- P1 -- ]
ata_piix 0000:00:1f.5: >setting latency timer to 64
scsi14 : ata_piix
scsi15 : ata_piix
ata15: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf200 irq 19
ata16: SATA max UDMA/133 cmd 0xf400 ctl 0xf300 bmdma 0xf208 irq 19
pata_acpi 0000:05:00.1: >enabling device (0000 -> 0001)
pata_acpi 0000:05:00.1: >setting latency timer to 64
pata_acpi 0000:06:00.1: >enabling device (0000 -> 0001)
pata_acpi 0000:06:00.1: >setting latency timer to 64
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: >setting latency timer to 64
ehci_hcd 0000:00:1a.7: >EHCI Host Controller
ehci_hcd 0000:00:1a.7: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: >debug port 1
ehci_hcd 0000:00:1a.7: >cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: >irq 18, io mem 0xfbffe000
ehci_hcd 0000:00:1a.7: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1a.7
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >6 ports detected
ehci_hcd 0000:00:1d.7: >setting latency timer to 64
ehci_hcd 0000:00:1d.7: >EHCI Host Controller
ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: >debug port 1
ehci_hcd 0000:00:1d.7: >cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: >irq 23, io mem 0xfbffd000
ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:1d.7
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: >setting latency timer to 64
uhci_hcd 0000:00:1a.0: >UHCI Host Controller
uhci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: >irq 16, io base 0x0000ff00
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: UHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb3: >SerialNumber: 0000:00:1a.0
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >2 ports detected
uhci_hcd 0000:00:1a.1: >setting latency timer to 64
uhci_hcd 0000:00:1a.1: >UHCI Host Controller
uhci_hcd 0000:00:1a.1: >new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: >irq 21, io base 0x0000fe00
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: UHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb4: >SerialNumber: 0000:00:1a.1
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >2 ports detected
uhci_hcd 0000:00:1a.2: >setting latency timer to 64
uhci_hcd 0000:00:1a.2: >UHCI Host Controller
uhci_hcd 0000:00:1a.2: >new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: >irq 18, io base 0x0000fd00
usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: >Product: UHCI Host Controller
usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb5: >SerialNumber: 0000:00:1a.2
hub 5-0:1.0: >USB hub found
hub 5-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.0: >setting latency timer to 64
uhci_hcd 0000:00:1d.0: >UHCI Host Controller
uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: >irq 23, io base 0x0000fc00
usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: >Product: UHCI Host Controller
usb usb6: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb6: >SerialNumber: 0000:00:1d.0
hub 6-0:1.0: >USB hub found
hub 6-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.1: >setting latency timer to 64
uhci_hcd 0000:00:1d.1: >UHCI Host Controller
uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: >irq 19, io base 0x0000fb00
usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: >Product: UHCI Host Controller
usb usb7: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb7: >SerialNumber: 0000:00:1d.1
hub 7-0:1.0: >USB hub found
hub 7-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.2: >setting latency timer to 64
uhci_hcd 0000:00:1d.2: >UHCI Host Controller
uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: >irq 18, io base 0x0000fa00
usb usb8: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: >Product: UHCI Host Controller
usb usb8: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb8: >SerialNumber: 0000:00:1d.2
hub 8-0:1.0: >USB hub found
hub 8-0:1.0: >2 ports detected
xhci_hcd 0000:02:00.0: >xHCI Host Controller
xhci_hcd 0000:02:00.0: >new USB bus registered, assigned bus number 9
xhci_hcd 0000:02:00.0: >irq 16, io mem 0xfbbfe000
xhci_hcd 0000:02:00.0: >irq 45 for MSI/MSI-X
xhci_hcd 0000:02:00.0: >irq 46 for MSI/MSI-X
xhci_hcd 0000:02:00.0: >irq 47 for MSI/MSI-X
xhci_hcd 0000:02:00.0: >irq 48 for MSI/MSI-X
xhci_hcd 0000:02:00.0: >irq 49 for MSI/MSI-X
xhci_hcd 0000:02:00.0: >irq 50 for MSI/MSI-X
xhci_hcd 0000:02:00.0: >irq 51 for MSI/MSI-X
xhci_hcd 0000:02:00.0: >irq 52 for MSI/MSI-X
usb usb9: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: >Product: xHCI Host Controller
usb usb9: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb9: >SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: >USB hub found
hub 9-0:1.0: >2 ports detected
xhci_hcd 0000:02:00.0: >xHCI Host Controller
xhci_hcd 0000:02:00.0: >new USB bus registered, assigned bus number 10
usb usb10: >New USB device found, idVendor=1d6b, idProduct=0003
usb usb10: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: >Product: xHCI Host Controller
usb usb10: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb10: >SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: >USB hub found
hub 10-0:1.0: >2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: >RTC can wake from S4
rtc_cmos 00:04: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 1:231:933
rtc_cmos 00:04: >setting system clock to 2013-10-02 11:56:55 UTC (1380715015)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ata5: SATA link down (SStatus 0 SControl 300)
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata8.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata8.00: configured for UDMA/66
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
scsi 7:0:0:0: >Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
scsi 7:0:0:0: >Attached scsi generic sg0 type 3
ata11: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
usb 1-1: >new high-speed USB device number 2 using ehci_hcd
ata16: SATA link down (SStatus 0 SControl 300)
ata15: SATA link down (SStatus 0 SControl 300)
usb 1-1: >New USB device found, idVendor=0424, idProduct=2514
usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: >USB hub found
hub 1-1:1.0: >3 ports detected
ata13.00: SATA link down (SStatus 0 SControl 300)
ata13.01: SATA link down (SStatus 0 SControl 300)
ata14.00: SATA link down (SStatus 0 SControl 300)
ata14.01: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[154]: starting version 175
wmi: Mapper loaded
pata_jmicron 0000:05:00.1: >setting latency timer to 64
scsi16 : pata_jmicron
scsi17 : pata_jmicron
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ata17: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 18
ata18: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 18
r8169 0000:07:00.0: >irq 53 for MSI/MSI-X
pata_jmicron 0000:06:00.1: >setting latency timer to 64
r8169 0000:07:00.0: >eth0: RTL8168e/8111e at 0xffffc90003060000, 1c:6f:65:c0:ac:71, XID 0c200000 IRQ 53
r8169 0000:07:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi18 : pata_jmicron
[drm] Initialized drm 1.1.0 20060810
scsi19 : pata_jmicron
ata19: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
ata20: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
ata17.00: ATAPI: PIONEER DVD-RW DVR-110D, 1.37, max UDMA/66
usb 5-1: >new low-speed USB device number 2 using uhci_hcd
ata17.00: configured for UDMA/66
scsi 16:0:0:0: >CD-ROM PIONEER DVD-RW DVR-110D 1.37 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 16:0:0:0: >Attached scsi CD-ROM sr0
sr 16:0:0:0: >Attached scsi generic sg1 type 5
usb 5-1: >New USB device found, idVendor=093a, idProduct=2521
usb 5-1: >New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 5-1: >Product: USB OPTICAL MOUSE
usb 1-1.1: >new high-speed USB device number 4 using ehci_hcd
MXM: GUID detected in BIOS
[drm] nouveau 0000:03:00.0: Detected an NVc0 generation card (0x0c4100a1)
[drm] nouveau 0000:03:00.0: Checking PRAMIN for VBIOS
usb 1-1.1: >New USB device found, idVendor=0424, idProduct=2640
usb 1-1.1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hub 1-1.1:1.0: >USB hub found
hub 1-1.1:1.0: >3 ports detected
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3
hid-generic 0003:093A:2521.0001: >input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:00:1a.2-1/input0
firewire_ohci 0000:08:06.0: >added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[drm] nouveau 0000:03:00.0: ... appears to be valid
[drm] nouveau 0000:03:00.0: Using VBIOS from PRAMIN
[drm] nouveau 0000:03:00.0: BIT BIOS found
[drm] nouveau 0000:03:00.0: Bios version 70.04.2e.00
[drm] nouveau 0000:03:00.0: TMDS table version 2.0
[drm] nouveau 0000:03:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:03:00.0: DCB version 4.0
[drm] nouveau 0000:03:00.0: DCB outp 00: 02000300 00000000
[drm] nouveau 0000:03:00.0: DCB outp 01: 01000302 00020030
[drm] nouveau 0000:03:00.0: DCB outp 02: 04011380 00000000
[drm] nouveau 0000:03:00.0: DCB outp 03: 08011382 00020030
[drm] nouveau 0000:03:00.0: DCB outp 04: 02022362 00020010
[drm] nouveau 0000:03:00.0: DCB conn 00: 00001030
[drm] nouveau 0000:03:00.0: DCB conn 01: 00010130
[drm] nouveau 0000:03:00.0: DCB conn 02: 00002261
[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 0 at offset 0x6C56
usb 1-1.3: >new high-speed USB device number 5 using ehci_hcd
[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 1 at offset 0x7327
[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 2 at offset 0x85A7
[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 3 at offset 0x85B1
[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 4 at offset 0x8790
[drm] nouveau 0000:03:00.0: Parsing VBIOS init table at offset 0x87F5
[drm] nouveau 0000:03:00.0: 0x87F5: Condition still not met after 20ms, skipping following opcodes
[TTM] Zone kernel: Available graphics memory: 12345338 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] nouveau 0000:03:00.0: Detected 1024MiB VRAM (GDDR5)
mtrr: type mismatch for e0000000,8000000 old: write-back new: write-combining
[drm] nouveau 0000:03:00.0: 512 MiB GART (aperture)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:03:00.0: 4 available performance level(s)
[drm] nouveau 0000:03:00.0: 0: core 50MHz shader 101MHz memory 135MHz voltage 875mV
[drm] nouveau 0000:03:00.0: 1: core 405MHz shader 810MHz memory 324MHz voltage 912mV
[drm] nouveau 0000:03:00.0: 2: core 405MHz shader 810MHz memory 1800MHz voltage 937mV-1075mV
[drm] nouveau 0000:03:00.0: 3: core 720MHz shader 1440MHz memory 1800MHz voltage 937mV-1075mV
[drm] nouveau 0000:03:00.0: c: core 50MHz shader 101MHz memory 135MHz voltage 875mV fanspeed 40%
[drm] nouveau 0000:03:00.0: MM: using COPY1 for buffer copies
usb 1-1.3: >New USB device found, idVendor=046d, idProduct=082b
usb 1-1.3: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: >Product: Webcam C170
usb 1-1.3: >Manufacturer:
usb 1-1.1.1: >new high-speed USB device number 6 using ehci_hcd
[drm] nouveau 0000:03:00.0: allocated 2560x1440 fb: 0x140000, bo ffff8805f7b99c00
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 320x90
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.0.0 20120316 for 0000:03:00.0 on minor 0
usb 1-1.1.1: >New USB device found, idVendor=0424, idProduct=4063
usb 1-1.1.1: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1.1: >Product: Ultra Fast Media Reader
usb 1-1.1.1: >Manufacturer: Generic
usb 1-1.1.1: >SerialNumber: 000000264001
Initializing USB Mass Storage driver...
usbcore: registered new interface driver uas
scsi20 : usb-storage 1-1.1.1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
firewire_core 0000:08:06.0: created device fw0: GUID 009a57d0001c6f65, S400
xor: automatically using best checksumming function:
generic_sse: 11926.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
scsi 20:0:0:0: >Direct-Access Generic Ultra HS-SD/MMC 1.91 PQ: 0 ANSI: 0
sd 20:0:0:0: >Attached scsi generic sg2 type 0
sd 20:0:0:0: >[sda] Attached SCSI removable disk
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
squashfs: version 4.0 (2009/01/31) Phillip Lougher
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[1240]: starting version 175
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11
ACPI Warning: 0x00000000fed1f410-0x00000000fed1f414 SystemMemory conflicts with Region \RCRB 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
EDAC MC: Ver: 2.1.0
device-mapper: multipath: version 1.4.0 loaded
lp: driver loaded but no devices found
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
ppdev: user-space parallel port driver
gpio_ich: GPIO from 195 to 255 on gpio_ich
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x11
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Linux video capture interface: v2.00
kvm: disabled by bios
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
uvcvideo: Found UVC 1.00 device Webcam C170 (046d:082b)
input: Webcam C170 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.3/1-1.3:1.0/input/input4
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
init: failsafe main process (1562) killed by TERM signal
usbcore: registered new interface driver snd-usb-audio
snd_hda_intel 0000:00:1b.0: >irq 54 for MSI/MSI-X
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
hda_intel: Disabling MSI
hda-intel: 0000:03:00.1: Handle VGA-switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card2/input13
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card2/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card2/input15
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card2/input16
r8169 0000:07:00.0: >eth0: link down
r8169 0000:07:00.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:07:00.0: >eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: alsa-restore main process (1796) terminated with status 99
[drm] nouveau 0000:03:00.0: 906e not supported yet
[drm] nouveau 0000:03:00.0: PMFB0_SUBP0: 0x037f0000
[drm] nouveau 0000:03:00.0: PMFB0_SUBP1: 0x037f0040
[drm] nouveau 0000:03:00.0: 906e not supported yet
[drm] nouveau 0000:03:00.0: PFIFO: unknown status 0x40000000
[drm] nouveau 0000:03:00.0: PFIFO: unknown status 0x40000000
[drm] nouveau 0000:03:00.0: PFIFO: unknown status 0x40000000
gvfsd-http[5870] trap int3 ip:7f5f0bac1c7f sp:7fff4096fce0 error:0
totem-plugin-vi[11688] trap int3 ip:7f4f44d04c7f sp:7fff287c7dd0 error:0
usb 1-1.2: >new high-speed USB device number 7 using ehci_hcd
usb 1-1.2: >New USB device found, idVendor=05ac, idProduct=1294
usb 1-1.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: >Product: iPhone
usb 1-1.2: >Manufacturer: Apple Inc.
usb 1-1.2: >SerialNumber: c23213e45e2a9217190e1ac7750d8e55c5ac6c96
ipheth 1-1.2:4.2: >Apple iPhone USB Ethernet device attached
usbcore: registered new interface driver ipheth
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
usb 1-1.1.2: >new high-speed USB device number 8 using ehci_hcd
usb 1-1.1.2: >New USB device found, idVendor=0951, idProduct=1625
usb 1-1.1.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1.2: >Product: DT 101 II
usb 1-1.1.2: >Manufacturer: Kingston
usb 1-1.1.2: >SerialNumber: 001CC0EC3504AA4027DA36F2
scsi21 : usb-storage 1-1.1.2:1.0
scsi 21:0:0:0: >Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2
sd 21:0:0:0: >Attached scsi generic sg3 type 0
sd 21:0:0:0: >[sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 21:0:0:0: >[sdb] Write Protect is off
sd 21:0:0:0: >[sdb] Mode Sense: 23 00 00 00
sd 21:0:0:0: >[sdb] No Caching mode page present
sd 21:0:0:0: >[sdb] Assuming drive cache: write through
sd 21:0:0:0: >[sdb] No Caching mode page present
sd 21:0:0:0: >[sdb] Assuming drive cache: write through
sdb:
sd 21:0:0:0: >[sdb] No Caching mode page present
sd 21:0:0:0: >[sdb] Assuming drive cache: write through
sd 21:0:0:0: >[sdb] Attached SCSI removable disk
sdb: detected capacity change from 8019509248 to 0
usb 1-1.1.2: >USB disconnect, device number 8
ipheth 1-1.2:4.2: >ipheth_rcvbulk_callback: urb status: -71
usb 1-1.2: >USB disconnect, device number 7
ipheth 1-1.2:4.2: >Apple iPhone USB Ethernet now disconnected
usb 1-1: >USB disconnect, device number 2
usb 1-1.1: >USB disconnect, device number 4
usb 1-1.1.1: >USB disconnect, device number 6
usb 1-1.3: >USB disconnect, device number 5
usb 1-1: >new high-speed USB device number 9 using ehci_hcd
usb 1-1: >New USB device found, idVendor=0424, idProduct=2514
usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: >USB hub found
hub 1-1:1.0: >3 ports detected
usb 1-1.1: >new high-speed USB device number 10 using ehci_hcd
usb 1-1.1: >New USB device found, idVendor=0424, idProduct=2640
usb 1-1.1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.1:1.0: >USB hub found
hub 1-1.1:1.0: >3 ports detected
usb 1-1.3: >new high-speed USB device number 11 using ehci_hcd
usb 1-1.3: >New USB device found, idVendor=046d, idProduct=082b
usb 1-1.3: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: >Product: Webcam C170
usb 1-1.3: >Manufacturer:
uvcvideo: Found UVC 1.00 device Webcam C170 (046d:082b)
input: Webcam C170 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.3/1-1.3:1.0/input/input17
usb 1-1.1.1: >new high-speed USB device number 12 using ehci_hcd
usb 1-1.1.1: >New USB device found, idVendor=0424, idProduct=4063
usb 1-1.1.1: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1.1: >Product: Ultra Fast Media Reader
usb 1-1.1.1: >Manufacturer: Generic
usb 1-1.1.1: >SerialNumber: 000000264001
scsi22 : usb-storage 1-1.1.1:1.0
scsi 22:0:0:0: >Direct-Access Generic Ultra HS-SD/MMC 1.91 PQ: 0 ANSI: 0
sd 22:0:0:0: >Attached scsi generic sg2 type 0
sd 22:0:0:0: >[sda] Attached SCSI removable disk