dmesg - v11
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-41-generic (buildd@akateko) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #64~precise1-Ubuntu SMP Thu Sep 12 16:50:04 UTC 2013 (Ubuntu 3.5.0-41.64~precise1-generic 3.5.7.21)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cc3e0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cc3e1000-0x00000000cc3e7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cc3e8000-0x00000000cccb1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cccb2000-0x00000000cd0a1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cd0a2000-0x00000000dd1d9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd1da000-0x00000000dd276fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd277000-0x00000000dd2d5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd2d6000-0x00000000dd404fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dd405000-0x00000000ddffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddfff000-0x00000000ddffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Supermicro X10SAE/X10SAE, BIOS 1.1 08/13/2013
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FF0000000 write-back
[ 0.000000] 2 base 0210000000 mask 7FF8000000 write-back
[ 0.000000] 3 base 0218000000 mask 7FFC000000 write-back
[ 0.000000] 4 base 021C000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 8GB, range: 256MB, type WB
[ 0.000000] reg 2, base: 8448MB, range: 128MB, type WB
[ 0.000000] reg 3, base: 8576MB, range: 64MB, type WB
[ 0.000000] reg 4, base: 8640MB, range: 32MB, type WB
[ 0.000000] reg 5, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 8160M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 5, base: 8672MB, range: 32MB, type UC
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xde000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd870-0x000fd87f] mapped at [ffff8800000fd870]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xddffffff]
[ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xddffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xddffffff @ [mem 0x1fffe000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x21dffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] [mem 0x200000000-0x21dffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x21dffffff @ [mem 0xdd2d4000-0xdd2d5fff]
[ 0.000000] RAMDISK: [mem 0x361fa000-0x370f4fff]
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 SUPERM)
[ 0.000000] ACPI: XSDT 00000000dd3de098 000AC (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000dd3e9e28 0010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000dd3de1d8 0BC4B (v02 SUPERM SMCI--MB 00000000 INTL 20120711)
[ 0.000000] ACPI: FACS 00000000dd403080 00040
[ 0.000000] ACPI: APIC 00000000dd3e9f38 00092 (v03 SUPERM SMCI--MB 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000dd3e9fd0 00044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000dd3ea018 00539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000dd3ea558 00AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000dd3eb030 002DE (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000dd3eb310 00348 (v01 PmRef ApTst 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 00000000dd3eb658 0003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dd3eb698 00038 (v01 SUPERM SMCI--MB 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000dd3eb6d0 00397 (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000dd3eba68 032DD (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: ASF! 00000000dd3eed48 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: DMAR 00000000dd3eedf0 00080 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: EINJ 00000000dd3eee70 00130 (v01 AMI AMI EINJ 00000000 00000000)
[ 0.000000] ACPI: ERST 00000000dd3eefa0 00230 (v01 AMIER AMI ERST 00000000 00000000)
[ 0.000000] ACPI: HEST 00000000dd3ef1d0 000A8 (v01 AMI AMI HEST 00000000 00000000)
[ 0.000000] ACPI: BERT 00000000dd3ef278 00030 (v01 AMI AMI BERT 00000000 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021dffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21dffffff]
[ 0.000000] NODE_DATA [mem 0x21dffc000-0x21dffffff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880215600000-ffff88021d5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21dffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xcc3e0fff]
[ 0.000000] node 0: [mem 0xcc3e8000-0xcccb1fff]
[ 0.000000] node 0: [mem 0xcd0a2000-0xdd1d9fff]
[ 0.000000] node 0: [mem 0xdd277000-0xdd2d5fff]
[ 0.000000] node 0: [mem 0xddfff000-0xddffffff]
[ 0.000000] node 0: [mem 0x100000000-0x21dffffff]
[ 0.000000] On node 0 totalpages: 2076112
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 884355 pages, LIFO batch:31
[ 0.000000] Normal zone: 18304 pages used for memmap
[ 0.000000] Normal zone: 1153152 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cc3e1000 - 00000000cc3e8000
[ 0.000000] PM: Registered nosave memory: 00000000cccb2000 - 00000000cd0a2000
[ 0.000000] PM: Registered nosave memory: 00000000dd1da000 - 00000000dd277000
[ 0.000000] PM: Registered nosave memory: 00000000dd2d6000 - 00000000dd405000
[ 0.000000] PM: Registered nosave memory: 00000000dd405000 - 00000000ddfff000
[ 0.000000] PM: Registered nosave memory: 00000000de000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] e820: [mem 0xde000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021dc00000 s83584 r8192 d22912 u262144
[ 0.000000] pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2041418
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8075220k/8880128k available (6827k kernel code, 575680k absent, 229228k reserved, 6342k data, 948k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.008000] TSC: PIT calibration matches HPET. 1 loops
[ 0.008000] Detected 3399.735 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.47 BogoMIPS (lpj=13598940)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000017] Security Framework initialized
[ 0.000024] AppArmor: AppArmor initialized
[ 0.000025] Yama: becoming mindful.
[ 0.000357] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.001377] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001802] Mount-cache hash table entries: 256
[ 0.001907] Initializing cgroup subsys cpuacct
[ 0.001908] Initializing cgroup subsys memory
[ 0.001913] Initializing cgroup subsys devices
[ 0.001914] Initializing cgroup subsys freezer
[ 0.001915] Initializing cgroup subsys blkio
[ 0.001916] Initializing cgroup subsys perf_event
[ 0.001933] CPU: Physical Processor ID: 0
[ 0.001933] CPU: Processor Core ID: 0
[ 0.001936] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.001936] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002680] mce: CPU supports 9 MCE banks
[ 0.002691] CPU0: Thermal monitoring enabled (TM1)
[ 0.002698] using mwait in idle threads.
[ 0.003836] ACPI: Core revision 20120320
[ 0.011333] ftrace: allocating 27640 entries in 108 pages
[ 0.019274] DMAR: Host address width 39
[ 0.019276] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.019281] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.019282] DMAR: RMRR base: 0x000000ddea8000 end: 0x000000ddeb6fff
[ 0.019346] IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.019346] HPET id 0 under DRHD base 0xfed90000
[ 0.019402] Enabled IRQ remapping in x2apic mode
[ 0.019403] Enabling x2apic
[ 0.019404] Enabled x2apic
[ 0.019408] Switched APIC routing to cluster x2apic.
[ 0.019774] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059431] CPU0: Intel(R) Xeon(R) CPU E3-1245 v3 @ 3.40GHz stepping 03
[ 0.165912] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
[ 0.165915] ... version: 3
[ 0.165916] ... bit width: 48
[ 0.165916] ... generic registers: 4
[ 0.165917] ... value mask: 0000ffffffffffff
[ 0.165917] ... max period: 000000007fffffff
[ 0.165918] ... fixed-purpose events: 3
[ 0.165919] ... event mask: 000000070000000f
[ 0.166007] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.166060] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
[ 0.262543] Brought up 8 CPUs
[ 0.262545] Total of 8 processors activated (54395.76 BogoMIPS).
[ 0.269747] devtmpfs: initialized
[ 0.270429] EVM: security.selinux
[ 0.270430] EVM: security.SMACK64
[ 0.270430] EVM: security.capability
[ 0.270453] PM: Registering ACPI NVS region [mem 0xcc3e1000-0xcc3e7fff] (28672 bytes)
[ 0.270454] PM: Registering ACPI NVS region [mem 0xdd2d6000-0xdd404fff] (1241088 bytes)
[ 0.270857] dummy:
[ 0.270882] RTC time: 14:27:50, date: 10/03/13
[ 0.270901] NET: Registered protocol family 16
[ 0.270953] Trying to unpack rootfs image as initramfs...
[ 0.270999] ACPI: bus type pci registered
[ 0.271029] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.271031] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.275705] PCI: Using configuration type 1 for base access
[ 0.276234] bio: create slab at 0
[ 0.276274] ACPI: Added _OSI(Module Device)
[ 0.276276] ACPI: Added _OSI(Processor Device)
[ 0.276277] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.276278] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.277484] ACPI: EC: Look up EC in DSDT
[ 0.278836] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.280680] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.280846] _OSC request data:1 17
[ 0.321889] ACPI: SSDT 00000000dd26cc18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.322195] ACPI: Dynamic OEM Table Load:
[ 0.322197] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.357941] ACPI: SSDT 00000000dd26c618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.358297] ACPI: Dynamic OEM Table Load:
[ 0.358298] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.361849] ACPI: SSDT 00000000dd26bd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.362152] ACPI: Dynamic OEM Table Load:
[ 0.362153] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.374497] ACPI: Interpreter enabled
[ 0.374500] ACPI: (supports S0 S1 S4 S5)
[ 0.374518] ACPI: Using IOAPIC for interrupt routing
[ 0.378476] ACPI: Power Resource [FN00] (off)
[ 0.378513] ACPI: Power Resource [FN01] (off)
[ 0.378548] ACPI: Power Resource [FN02] (off)
[ 0.378583] ACPI: Power Resource [FN03] (off)
[ 0.378617] ACPI: Power Resource [FN04] (off)
[ 0.378967] ACPI: No dock devices found.
[ 0.378981] HEST: Table parsing has been initialized.
[ 0.378983] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.379166] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.379417] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.379418] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.379419] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.379421] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.379422] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.379422] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.379423] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.379424] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.379425] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.379426] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
[ 0.379427] pci_root PNP0A08:00: host bridge window [mem 0x21e000000-0x61dffffff]
[ 0.379445] PCI host bridge to bus 0000:00
[ 0.379447] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.379448] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.379449] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.379450] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.379450] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.379451] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.379452] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.379453] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.379454] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.379455] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
[ 0.379456] pci_bus 0000:00: root bus resource [mem 0x21e000000-0x61dffffff]
[ 0.379462] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000
[ 0.379488] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.379511] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.379520] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
[ 0.379542] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.379576] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.379592] pci 0000:00:14.0: reg 10: [mem 0xf7f20000-0xf7f2ffff 64bit]
[ 0.379643] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.379660] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.379677] pci 0000:00:16.0: reg 10: [mem 0xf7f3c000-0xf7f3c00f 64bit]
[ 0.379731] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.379755] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
[ 0.379770] pci 0000:00:19.0: reg 10: [mem 0xf7f00000-0xf7f1ffff]
[ 0.379777] pci 0000:00:19.0: reg 14: [mem 0xf7f39000-0xf7f39fff]
[ 0.379784] pci 0000:00:19.0: reg 18: [io 0xf020-0xf03f]
[ 0.379835] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.379855] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.379873] pci 0000:00:1a.0: reg 10: [mem 0xf7f38000-0xf7f383ff]
[ 0.379951] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.379973] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.379986] pci 0000:00:1b.0: reg 10: [mem 0xf7f30000-0xf7f33fff 64bit]
[ 0.380041] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.380058] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.380120] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.380141] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.380204] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.380223] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[ 0.380279] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.380296] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 0.380352] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.380369] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
[ 0.380425] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.380447] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.380465] pci 0000:00:1d.0: reg 10: [mem 0xf7f37000-0xf7f373ff]
[ 0.380543] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.380565] pci 0000:00:1f.0: [8086:8c56] type 00 class 0x060100
[ 0.380671] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.380684] pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
[ 0.380690] pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
[ 0.380697] pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
[ 0.380703] pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
[ 0.380710] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf01f]
[ 0.380716] pci 0000:00:1f.2: reg 24: [mem 0xf7f36000-0xf7f367ff]
[ 0.380748] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.380760] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.380773] pci 0000:00:1f.3: reg 10: [mem 0xf7f35000-0xf7f350ff 64bit]
[ 0.380790] pci 0000:00:1f.3: reg 20: [io 0x0580-0x059f]
[ 0.380819] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000
[ 0.380836] pci 0000:00:1f.6: reg 10: [mem 0xf7f34000-0xf7f34fff 64bit]
[ 0.380911] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.380936] pci 0000:02:00.0: [1002:68e1] type 00 class 0x030000
[ 0.380946] pci 0000:02:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.380954] pci 0000:02:00.0: reg 18: [mem 0xf7e20000-0xf7e3ffff 64bit]
[ 0.380960] pci 0000:02:00.0: reg 20: [io 0xe000-0xe0ff]
[ 0.380970] pci 0000:02:00.0: reg 30: [mem 0xf7e00000-0xf7e1ffff pref]
[ 0.380993] pci 0000:02:00.0: supports D1 D2
[ 0.381009] pci 0000:02:00.1: [1002:aa68] type 00 class 0x040300
[ 0.381019] pci 0000:02:00.1: reg 10: [mem 0xf7e40000-0xf7e43fff 64bit]
[ 0.381064] pci 0000:02:00.1: supports D1 D2
[ 0.385780] pci 0000:00:01.1: PCI bridge to [bus 02-02]
[ 0.385782] pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
[ 0.385783] pci 0000:00:01.1: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.385786] pci 0000:00:01.1: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.385820] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.385899] pci 0000:04:00.0: [8086:1533] type 00 class 0x020000
[ 0.385922] pci 0000:04:00.0: reg 10: [mem 0xf7d00000-0xf7d7ffff]
[ 0.385954] pci 0000:04:00.0: reg 18: [io 0xd000-0xd01f]
[ 0.385971] pci 0000:04:00.0: reg 1c: [mem 0xf7d80000-0xf7d83fff]
[ 0.386108] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.393791] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.393795] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.393798] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.393867] pci 0000:05:00.0: [10e3:8113] type 01 class 0x060401
[ 0.393986] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.394008] pci 0000:00:1c.5: PCI bridge to [bus 05-06]
[ 0.394012] pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.394078] pci 0000:06:03.0: [104c:8023] type 00 class 0x0c0010
[ 0.394108] pci 0000:06:03.0: reg 10: [mem 0xf7c04000-0xf7c047ff]
[ 0.394125] pci 0000:06:03.0: reg 14: [mem 0xf7c00000-0xf7c03fff]
[ 0.394257] pci 0000:06:03.0: supports D1 D2
[ 0.394258] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.394337] pci 0000:05:00.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.394346] pci 0000:05:00.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.394353] pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.394354] pci 0000:05:00.0: bridge window [mem 0xf7c00000-0xf7cfffff] (subtractive decode)
[ 0.394355] pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.394356] pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.394468] pci 0000:07:00.0: [1912:0015] type 00 class 0x0c0330
[ 0.394496] pci 0000:07:00.0: reg 10: [mem 0xf7b00000-0xf7b01fff 64bit]
[ 0.394637] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.401825] pci 0000:00:1c.6: PCI bridge to [bus 07-07]
[ 0.401830] pci 0000:00:1c.6: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.401879] pci 0000:08:00.0: [1b21:0612] type 00 class 0x010601
[ 0.401893] pci 0000:08:00.0: reg 10: [io 0xc050-0xc057]
[ 0.401904] pci 0000:08:00.0: reg 14: [io 0xc040-0xc043]
[ 0.401914] pci 0000:08:00.0: reg 18: [io 0xc030-0xc037]
[ 0.401924] pci 0000:08:00.0: reg 1c: [io 0xc020-0xc023]
[ 0.401935] pci 0000:08:00.0: reg 20: [io 0xc000-0xc01f]
[ 0.401945] pci 0000:08:00.0: reg 24: [mem 0xf7a00000-0xf7a001ff]
[ 0.409768] pci 0000:00:1c.7: PCI bridge to [bus 08-08]
[ 0.409771] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.409774] pci 0000:00:1c.7: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.409799] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.409853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.409872] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.409890] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.409909] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06.BR30._PRT]
[ 0.409938] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
[ 0.409956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[ 0.409974] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.409989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 0.410017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.410034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
[ 0.410097] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.410375] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.414164] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.414192] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.414217] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.414241] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.414265] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.414290] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.414314] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.414338] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.414389] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.414391] vgaarb: loaded
[ 0.414392] vgaarb: bridge control possible 0000:02:00.0
[ 0.414473] SCSI subsystem initialized
[ 0.414494] libata version 3.00 loaded.
[ 0.414506] ACPI: bus type usb registered
[ 0.414515] usbcore: registered new interface driver usbfs
[ 0.414519] usbcore: registered new interface driver hub
[ 0.414530] usbcore: registered new device driver usb
[ 0.414567] PCI: Using ACPI for IRQ routing
[ 0.415676] PCI: pci_cache_line_size set to 64 bytes
[ 0.415830] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.415831] e820: reserve RAM buffer [mem 0xcc3e1000-0xcfffffff]
[ 0.415832] e820: reserve RAM buffer [mem 0xcccb2000-0xcfffffff]
[ 0.415833] e820: reserve RAM buffer [mem 0xdd1da000-0xdfffffff]
[ 0.415834] e820: reserve RAM buffer [mem 0xdd2d6000-0xdfffffff]
[ 0.415834] e820: reserve RAM buffer [mem 0xde000000-0xdfffffff]
[ 0.415835] e820: reserve RAM buffer [mem 0x21e000000-0x21fffffff]
[ 0.415884] NetLabel: Initializing
[ 0.415884] NetLabel: domain hash size = 128
[ 0.415885] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.415890] NetLabel: unlabeled traffic allowed by default
[ 0.415923] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.415927] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.417939] Switching to clocksource hpet
[ 0.421205] AppArmor: AppArmor Filesystem Enabled
[ 0.421213] pnp: PnP ACPI init
[ 0.421218] ACPI: bus type pnp registered
[ 0.421364] pnp 00:00: [bus 00-3e]
[ 0.421366] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.421367] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.421368] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.421369] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.421370] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.421371] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.421372] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.421373] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.421374] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.421375] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.421376] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.421377] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.421378] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.421379] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.421380] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.421381] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.421381] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.421382] pnp 00:00: [mem 0xe0000000-0xfeafffff window]
[ 0.421384] pnp 00:00: [mem 0x21e000000-0x61dffffff window]
[ 0.421417] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.421429] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.421448] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.421449] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.421455] pnp 00:02: [io 0x0000-0x001f]
[ 0.421456] pnp 00:02: [io 0x0081-0x0091]
[ 0.421457] pnp 00:02: [io 0x0093-0x009f]
[ 0.421458] pnp 00:02: [io 0x00c0-0x00df]
[ 0.421459] pnp 00:02: [dma 4]
[ 0.421468] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.421471] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.421479] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.421526] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.421536] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.421550] pnp 00:05: [io 0x00f0]
[ 0.421559] pnp 00:05: [irq 13]
[ 0.421569] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.421613] pnp 00:06: [io 0x002e-0x002f]
[ 0.421614] pnp 00:06: [io 0x004e-0x004f]
[ 0.421616] pnp 00:06: [io 0x0061]
[ 0.421617] pnp 00:06: [io 0x0063]
[ 0.421618] pnp 00:06: [io 0x0065]
[ 0.421619] pnp 00:06: [io 0x0067]
[ 0.421619] pnp 00:06: [io 0x0070]
[ 0.421620] pnp 00:06: [io 0x0080]
[ 0.421621] pnp 00:06: [io 0x0092]
[ 0.421622] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.421623] pnp 00:06: [io 0x0680-0x069f]
[ 0.421624] pnp 00:06: [io 0xffff]
[ 0.421625] pnp 00:06: [io 0xffff]
[ 0.421625] pnp 00:06: [io 0xffff]
[ 0.421626] pnp 00:06: [io 0x1c00-0x1cfe]
[ 0.421627] pnp 00:06: [io 0x1d00-0x1dfe]
[ 0.421628] pnp 00:06: [io 0x1e00-0x1efe]
[ 0.421629] pnp 00:06: [io 0x1f00-0x1ffe]
[ 0.421630] pnp 00:06: [io 0x0ca4-0x0ca7]
[ 0.421631] pnp 00:06: [io 0x1800-0x18fe]
[ 0.421631] pnp 00:06: [io 0x164e-0x164f]
[ 0.421657] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.421658] system 00:06: [io 0xffff] has been reserved
[ 0.421659] system 00:06: [io 0xffff] has been reserved
[ 0.421660] system 00:06: [io 0xffff] has been reserved
[ 0.421661] system 00:06: [io 0x1c00-0x1cfe] has been reserved
[ 0.421662] system 00:06: [io 0x1d00-0x1dfe] has been reserved
[ 0.421663] system 00:06: [io 0x1e00-0x1efe] has been reserved
[ 0.421664] system 00:06: [io 0x1f00-0x1ffe] has been reserved
[ 0.421665] system 00:06: [io 0x0ca4-0x0ca7] has been reserved
[ 0.421666] system 00:06: [io 0x1800-0x18fe] has been reserved
[ 0.421667] system 00:06: [io 0x164e-0x164f] has been reserved
[ 0.421669] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.421672] pnp 00:07: [io 0x0070-0x0077]
[ 0.421677] pnp 00:07: [irq 8]
[ 0.421687] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.421699] pnp 00:08: [io 0x1854-0x1857]
[ 0.421716] system 00:08: [io 0x1854-0x1857] has been reserved
[ 0.421718] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.421769] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.421770] pnp 00:09: [io 0x0a00-0x0a1f]
[ 0.421771] pnp 00:09: [io 0x0a30-0x0a3f]
[ 0.421772] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.421790] system 00:09: [io 0x0a00-0x0a1f] has been reserved
[ 0.421792] system 00:09: [io 0x0a30-0x0a3f] has been reserved
[ 0.421793] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.421934] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.421939] pnp 00:0a: [irq 4]
[ 0.421940] pnp 00:0a: [dma 0 disabled]
[ 0.421976] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.422095] pnp 00:0b: [io 0x02f8-0x02ff]
[ 0.422099] pnp 00:0b: [irq 3]
[ 0.422100] pnp 00:0b: [dma 0 disabled]
[ 0.422125] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.422137] pnp 00:0c: [io 0x0010-0x001f]
[ 0.422138] pnp 00:0c: [io 0x0022-0x003f]
[ 0.422139] pnp 00:0c: [io 0x0044-0x005f]
[ 0.422140] pnp 00:0c: [io 0x0062-0x0063]
[ 0.422141] pnp 00:0c: [io 0x0065-0x006f]
[ 0.422142] pnp 00:0c: [io 0x0072-0x007f]
[ 0.422143] pnp 00:0c: [io 0x0080]
[ 0.422143] pnp 00:0c: [io 0x0084-0x0086]
[ 0.422144] pnp 00:0c: [io 0x0088]
[ 0.422145] pnp 00:0c: [io 0x008c-0x008e]
[ 0.422146] pnp 00:0c: [io 0x0090-0x009f]
[ 0.422147] pnp 00:0c: [io 0x00a2-0x00bf]
[ 0.422148] pnp 00:0c: [io 0x00e0-0x00ef]
[ 0.422148] pnp 00:0c: [io 0x04d0-0x04d1]
[ 0.422169] system 00:0c: [io 0x04d0-0x04d1] has been reserved
[ 0.422171] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.422423] pnp 00:0d: [mem 0xfed1c000-0xfed1ffff]
[ 0.422424] pnp 00:0d: [mem 0xfed10000-0xfed17fff]
[ 0.422425] pnp 00:0d: [mem 0xfed18000-0xfed18fff]
[ 0.422426] pnp 00:0d: [mem 0xfed19000-0xfed19fff]
[ 0.422427] pnp 00:0d: [mem 0xf8000000-0xfbffffff]
[ 0.422427] pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
[ 0.422428] pnp 00:0d: [mem 0xfed90000-0xfed93fff]
[ 0.422429] pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
[ 0.422431] pnp 00:0d: [mem 0xff000000-0xffffffff]
[ 0.422432] pnp 00:0d: [mem 0xfee00000-0xfeefffff]
[ 0.422433] pnp 00:0d: [mem 0xf7fef000-0xf7feffff]
[ 0.422434] pnp 00:0d: [mem 0xf7ff0000-0xf7ff0fff]
[ 0.422465] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.422467] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.422468] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.422469] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.422470] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.422471] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.422472] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.422473] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.422474] system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
[ 0.422476] system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.422477] system 00:0d: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.422478] system 00:0d: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.422479] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.422606] pnp: PnP ACPI: found 14 devices
[ 0.422607] ACPI: ACPI bus type pnp unregistered
[ 0.425525] Freeing initrd memory: 15340k freed
[ 0.428171] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000
[ 0.428173] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[ 0.428174] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03-03] add_size 200000
[ 0.428207] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.428208] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.428209] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.428212] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
[ 0.428214] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.428216] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.428217] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.428222] pci 0000:00:01.1: PCI bridge to [bus 02-02]
[ 0.428223] pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
[ 0.428225] pci 0000:00:01.1: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.428227] pci 0000:00:01.1: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.428229] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.428231] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.428235] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
[ 0.428238] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.428244] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.428246] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.428250] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.428257] pci 0000:05:00.0: PCI bridge to [bus 06-06]
[ 0.428264] pci 0000:05:00.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.428274] pci 0000:00:1c.5: PCI bridge to [bus 05-06]
[ 0.428278] pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.428284] pci 0000:00:1c.6: PCI bridge to [bus 07-07]
[ 0.428288] pci 0000:00:1c.6: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.428294] pci 0000:00:1c.7: PCI bridge to [bus 08-08]
[ 0.428296] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.428300] pci 0000:00:1c.7: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.428336] pci 0000:05:00.0: setting latency timer to 64
[ 0.428347] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.428348] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.428349] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.428350] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.428351] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.428352] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.428353] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.428354] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.428355] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.428356] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
[ 0.428357] pci_bus 0000:00: resource 14 [mem 0x21e000000-0x61dffffff]
[ 0.428358] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.428359] pci_bus 0000:02: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.428360] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.428361] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.428362] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf01fffff]
[ 0.428363] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.428364] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.428365] pci_bus 0000:04: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.428366] pci_bus 0000:05: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.428367] pci_bus 0000:06: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.428368] pci_bus 0000:06: resource 5 [mem 0xf7c00000-0xf7cfffff]
[ 0.428369] pci_bus 0000:07: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.428370] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
[ 0.428371] pci_bus 0000:08: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.428387] NET: Registered protocol family 2
[ 0.428486] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.428894] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.429763] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.429869] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.429870] TCP: reno registered
[ 0.429878] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.429899] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.429940] NET: Registered protocol family 1
[ 0.469965] pci 0000:02:00.0: Boot video device
[ 0.470082] PCI: CLS 64 bytes, default 64
[ 0.470085] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.470087] software IO TLB [mem 0xd91da000-0xdd1d9fff] (64MB) mapped at [ffff8800d91da000-ffff8800dd1d9fff]
[ 0.470447] audit: initializing netlink socket (disabled)
[ 0.470455] type=2000 audit(1380810470.368:1): initialized
[ 0.485214] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.486205] VFS: Disk quotas dquot_6.5.2
[ 0.486225] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.486452] fuse init (API version 7.19)
[ 0.486490] msgmni has been set to 15801
[ 0.486706] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.486723] io scheduler noop registered
[ 0.486724] io scheduler deadline registered (default)
[ 0.486736] io scheduler cfq registered
[ 0.486799] pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
[ 0.486842] pcieport 0000:00:01.1: irq 42 for MSI/MSI-X
[ 0.486902] pcieport 0000:00:1c.0: irq 43 for MSI/MSI-X
[ 0.486981] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[ 0.487053] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[ 0.487122] pcieport 0000:00:1c.6: irq 46 for MSI/MSI-X
[ 0.487189] pcieport 0000:00:1c.7: irq 47 for MSI/MSI-X
[ 0.487239] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.487240] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.487247] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
[ 0.487248] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.487249] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[ 0.487251] pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
[ 0.487259] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.487262] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.487271] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.487272] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.487275] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.487284] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.487285] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.487285] pci 0000:06:03.0: Signaling PME through PCIe PME interrupt
[ 0.487289] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.487297] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[ 0.487298] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 0.487301] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
[ 0.487309] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
[ 0.487310] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[ 0.487313] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
[ 0.487320] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.487355] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 8c10 ss_vid 15d9 ss_did 805
[ 0.487369] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.487371] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.487394] intel_idle: does not run on family 6 model 60
[ 0.487435] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.487438] ACPI: Power Button [PWRB]
[ 0.487455] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.487456] ACPI: Power Button [PWRF]
[ 0.487488] ACPI: Fan [FAN0] (off)
[ 0.487501] ACPI: Fan [FAN1] (off)
[ 0.487513] ACPI: Fan [FAN2] (off)
[ 0.487526] ACPI: Fan [FAN3] (off)
[ 0.487537] ACPI: Fan [FAN4] (off)
[ 0.487572] ACPI: Requesting acpi_cpufreq
[ 0.488841] Monitor-Mwait will be used to enter C-1 state
[ 0.488851] Monitor-Mwait will be used to enter C-2 state
[ 0.488860] ACPI: acpi_idle registered with cpuidle
[ 0.493655] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.493656] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.493750] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.493751] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.493804] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 0.493864] \_SB_:_OSC request failed
[ 0.493864] _OSC request data:1 1 0
[ 0.493867] _OSC request data:1 1 0
[ 0.493868] GHES: APEI firmware first mode is enabled by APEI bit.
[ 0.514264] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.534605] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.555456] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.575817] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.575970] Linux agpgart interface v0.103
[ 0.576589] brd: module loaded
[ 0.576900] loop: module loaded
[ 0.577053] Fixed MDIO Bus: probed
[ 0.577071] tun: Universal TUN/TAP device driver, 1.6
[ 0.577072] tun: (C) 1999-2004 Max Krasnyansky
[ 0.577092] PPP generic driver version 2.4.2
[ 0.577121] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.577152] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.577155] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.577158] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.577179] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.581047] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.581055] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7f38000
[ 0.589881] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.589892] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.589893] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.589894] usb usb1: Product: EHCI Host Controller
[ 0.589895] usb usb1: Manufacturer: Linux 3.5.0-41-generic ehci_hcd
[ 0.589896] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.589952] hub 1-0:1.0: USB hub found
[ 0.589954] hub 1-0:1.0: 2 ports detected
[ 0.589993] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.589996] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.589998] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.590013] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.593887] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.593895] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7f37000
[ 0.605869] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.605875] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.605876] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.605877] usb usb2: Product: EHCI Host Controller
[ 0.605878] usb usb2: Manufacturer: Linux 3.5.0-41-generic ehci_hcd
[ 0.605879] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.605926] hub 2-0:1.0: USB hub found
[ 0.605927] hub 2-0:1.0: 2 ports detected
[ 0.605955] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.605963] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.605996] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 0.605998] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.606000] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.606069] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.606099] xhci_hcd 0000:00:14.0: irq 48 for MSI/MSI-X
[ 0.606126] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.606127] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.606127] usb usb3: Product: xHCI Host Controller
[ 0.606128] usb usb3: Manufacturer: Linux 3.5.0-41-generic xhci_hcd
[ 0.606129] usb usb3: SerialNumber: 0000:00:14.0
[ 0.606169] xHCI xhci_add_endpoint called for root hub
[ 0.606169] xHCI xhci_check_bandwidth called for root hub
[ 0.606179] hub 3-0:1.0: USB hub found
[ 0.606193] hub 3-0:1.0: 15 ports detected
[ 0.606250] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.606251] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.606266] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.606267] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.606268] usb usb4: Product: xHCI Host Controller
[ 0.606269] usb usb4: Manufacturer: Linux 3.5.0-41-generic xhci_hcd
[ 0.606270] usb usb4: SerialNumber: 0000:00:14.0
[ 0.606302] xHCI xhci_add_endpoint called for root hub
[ 0.606303] xHCI xhci_check_bandwidth called for root hub
[ 0.606312] hub 4-0:1.0: USB hub found
[ 0.606321] hub 4-0:1.0: 6 ports detected
[ 0.606442] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 0.606446] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
[ 0.611781] xhci_hcd 0000:07:00.0: irq 49 for MSI/MSI-X
[ 0.611785] xhci_hcd 0000:07:00.0: irq 50 for MSI/MSI-X
[ 0.611789] xhci_hcd 0000:07:00.0: irq 51 for MSI/MSI-X
[ 0.611792] xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X
[ 0.611795] xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X
[ 0.611799] xhci_hcd 0000:07:00.0: irq 54 for MSI/MSI-X
[ 0.611802] xhci_hcd 0000:07:00.0: irq 55 for MSI/MSI-X
[ 0.611806] xhci_hcd 0000:07:00.0: irq 56 for MSI/MSI-X
[ 0.611926] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.611927] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.611928] usb usb5: Product: xHCI Host Controller
[ 0.611929] usb usb5: Manufacturer: Linux 3.5.0-41-generic xhci_hcd
[ 0.611930] usb usb5: SerialNumber: 0000:07:00.0
[ 0.611966] xHCI xhci_add_endpoint called for root hub
[ 0.611966] xHCI xhci_check_bandwidth called for root hub
[ 0.611977] hub 5-0:1.0: USB hub found
[ 0.611983] hub 5-0:1.0: 2 ports detected
[ 0.612016] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 0.612018] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
[ 0.615139] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.615140] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.615141] usb usb6: Product: xHCI Host Controller
[ 0.615142] usb usb6: Manufacturer: Linux 3.5.0-41-generic xhci_hcd
[ 0.615142] usb usb6: SerialNumber: 0000:07:00.0
[ 0.615175] xHCI xhci_add_endpoint called for root hub
[ 0.615176] xHCI xhci_check_bandwidth called for root hub
[ 0.615186] hub 6-0:1.0: USB hub found
[ 0.615192] hub 6-0:1.0: 2 ports detected
[ 0.615264] usbcore: registered new interface driver libusual
[ 0.615282] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.617816] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.617818] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.617876] mousedev: PS/2 mouse device common for all mice
[ 0.617949] rtc_cmos 00:07: RTC can wake from S4
[ 0.618040] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.618063] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.618093] device-mapper: uevent: version 1.0.3
[ 0.618123] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.618169] cpuidle: using governor ladder
[ 0.618233] cpuidle: using governor menu
[ 0.618234] EFI Variables Facility v0.08 2004-May-17
[ 0.618327] ashmem: initialized
[ 0.618387] TCP: cubic registered
[ 0.618429] NET: Registered protocol family 10
[ 0.618520] NET: Registered protocol family 17
[ 0.618526] Key type dns_resolver registered
[ 0.618598] PM: Hibernation image not present or could not be loaded.
[ 0.618603] registered taskstats version 1
[ 0.619755] Key type trusted registered
[ 0.620735] Key type encrypted registered
[ 0.622234] Magic number: 1:659:484
[ 0.622320] rtc_cmos 00:07: setting system clock to 2013-10-03 14:27:50 UTC (1380810470)
[ 0.623275] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.623276] EDD information not available.
[ 0.624270] Freeing unused kernel memory: 948k freed
[ 0.624332] Write protecting the kernel read-only data: 12288k
[ 0.626684] Freeing unused kernel memory: 1356k freed
[ 0.628461] Freeing unused kernel memory: 1060k freed
[ 0.637996] udevd[120]: starting version 175
[ 0.653447] dca service started, version 1.12.1
[ 0.653552] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
[ 0.653554] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 0.653598] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.653655] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.653685] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
[ 0.654772] igb: Intel(R) Gigabit Ethernet Network Driver - version 4.0.1-k
[ 0.654774] igb: Copyright (c) 2007-2012 Intel Corporation.
[ 0.655250] igb 0000:04:00.0: irq 58 for MSI/MSI-X
[ 0.655256] igb 0000:04:00.0: irq 59 for MSI/MSI-X
[ 0.655261] igb 0000:04:00.0: irq 60 for MSI/MSI-X
[ 0.655266] igb 0000:04:00.0: irq 61 for MSI/MSI-X
[ 0.655271] igb 0000:04:00.0: irq 62 for MSI/MSI-X
[ 0.698144] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 0.698147] igb 0000:04:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:25:90:86:c7:6b
[ 0.698202] igb 0000:04:00.0: eth0: PBA No: 011000-000
[ 0.698203] igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 0.713952] firewire_ohci 0000:06:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 0.848946] e1000e 0000:00:19.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:86:c7:6a
[ 0.848948] e1000e 0000:00:19.0: eth1: Intel(R) PRO/1000 Network Connection
[ 0.848978] e1000e 0000:00:19.0: eth1: MAC: 11, PHY: 12, PBA No: 0100FF-0FF
[ 0.849016] ahci 0000:00:1f.2: version 3.0
[ 0.849100] ahci 0000:00:1f.2: irq 63 for MSI/MSI-X
[ 0.849158] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.849160] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.849174] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.886075] scsi0 : ahci
[ 0.886183] scsi1 : ahci
[ 0.886281] scsi2 : ahci
[ 0.886380] scsi3 : ahci
[ 0.886480] scsi4 : ahci
[ 0.886583] scsi5 : ahci
[ 0.886812] ata1: SATA max UDMA/133 abar m2048@0xf7f36000 port 0xf7f36100 irq 63
[ 0.886815] ata2: SATA max UDMA/133 abar m2048@0xf7f36000 port 0xf7f36180 irq 63
[ 0.886817] ata3: SATA max UDMA/133 abar m2048@0xf7f36000 port 0xf7f36200 irq 63
[ 0.886819] ata4: SATA max UDMA/133 abar m2048@0xf7f36000 port 0xf7f36280 irq 63
[ 0.886821] ata5: SATA max UDMA/133 abar m2048@0xf7f36000 port 0xf7f36300 irq 63
[ 0.886823] ata6: SATA max UDMA/133 abar m2048@0xf7f36000 port 0xf7f36380 irq 63
[ 0.886927] ahci 0000:08:00.0: irq 64 for MSI/MSI-X
[ 0.886953] ahci: SSS flag set, parallel bus scan disabled
[ 0.886989] ahci 0000:08:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.886991] ahci 0000:08:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 0.887190] scsi6 : ahci
[ 0.887307] scsi7 : ahci
[ 0.887337] ata7: SATA max UDMA/133 abar m512@0xf7a00000 port 0xf7a00100 irq 64
[ 0.887339] ata8: SATA max UDMA/133 abar m512@0xf7a00000 port 0xf7a00180 irq 64
[ 0.901728] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.034168] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.034170] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.034368] hub 1-1:1.0: USB hub found
[ 1.034472] hub 1-1:1.0: 6 ports detected
[ 1.145655] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.205605] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.205624] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.205645] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.205661] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.205685] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.205705] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.213692] firewire_core 0000:06:03.0: created device fw0: GUID 0030480000109c6c, S400
[ 1.278019] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.278022] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.278353] hub 2-1:1.0: USB hub found
[ 1.278451] hub 2-1:1.0: 8 ports detected
[ 1.377443] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.388791] ata7.00: ATA-8: KINGSTON SV300S37A120G, 505ABBF1, max UDMA/133
[ 1.388793] ata7.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.399151] ata7.00: configured for UDMA/133
[ 1.399223] scsi 6:0:0:0: Direct-Access ATA KINGSTON SV300S3 505A PQ: 0 ANSI: 5
[ 1.399295] sd 6:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.399314] sd 6:0:0:0: [sda] Write Protect is off
[ 1.399315] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.399321] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.399341] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 1.399878] sda: sda1 sda2 < sda5 sda6 >
[ 1.400082] sd 6:0:0:0: [sda] Attached SCSI disk
[ 1.433981] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 1.445435] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 1.469414] Refined TSC clocksource calibration: 3399.995 MHz.
[ 1.469418] Switching to clocksource tsc
[ 1.521851] usb 3-1: New USB device found, idVendor=0a81, idProduct=0101
[ 1.521854] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.521855] usb 3-1: Product: USB Keyboard
[ 1.521856] usb 3-1: Manufacturer: CHESEN
[ 1.522248] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.522251] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.522253] usb 3-1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
[ 1.689280] usb 3-9: new high-speed USB device number 3 using xhci_hcd
[ 1.713860] usb 3-9: New USB device found, idVendor=0cf3, idProduct=9271
[ 1.713863] usb 3-9: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 1.713864] usb 3-9: Product: USB2.0 WLAN
[ 1.713865] usb 3-9: Manufacturer: ATHEROS
[ 1.713866] usb 3-9: SerialNumber: 12345
[ 1.717276] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.828561] Adding 8268796k swap on /dev/sda6. Priority:-1 extents:1 across:8268796k SS
[ 1.833218] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1.833222] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 1.836360] udevd[395]: starting version 175
[ 1.843486] lp: driver loaded but no devices found
[ 1.858031] [drm] Initialized drm 1.1.0 20060810
[ 1.872210] cfg80211: Calling CRDA to update world regulatory domain
[ 1.872486] snd_hda_intel 0000:00:1b.0: irq 65 for MSI/MSI-X
[ 1.881903] type=1400 audit(1380835671.757:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=520 comm="apparmor_parser"
[ 1.882098] type=1400 audit(1380835671.757:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=562 comm="apparmor_parser"
[ 1.882175] type=1400 audit(1380835671.757:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=520 comm="apparmor_parser"
[ 1.882334] type=1400 audit(1380835671.757:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=520 comm="apparmor_parser"
[ 1.882369] type=1400 audit(1380835671.757:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=562 comm="apparmor_parser"
[ 1.882523] type=1400 audit(1380835671.757:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=562 comm="apparmor_parser"
[ 1.886517] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x10
[ 1.901955] usb 3-9: ath9k_htc: Firmware htc_9271.fw requested
[ 1.901987] usbcore: registered new interface driver ath9k_htc
[ 1.906093] [drm] radeon defaulting to kernel modesetting.
[ 1.906095] [drm] radeon kernel modesetting enabled.
[ 1.906320] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E1 0x174B:0x6000).
[ 1.906352] [drm] register mmio base: 0xF7E20000
[ 1.906354] [drm] register mmio size: 131072
[ 1.906429] ATOM BIOS: C09302
[ 1.906445] radeon 0000:02:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 1.906447] radeon 0000:02:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 1.911087] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 1.911090] [drm] RAM width 64bits DDR
[ 1.911188] [TTM] Zone kernel: Available graphics memory: 4046962 kiB
[ 1.911190] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.911191] [TTM] Initializing pool allocator
[ 1.911194] [TTM] Initializing DMA pool allocator
[ 1.911209] [drm] radeon: 1024M of VRAM memory ready
[ 1.911210] [drm] radeon: 512M of GTT memory ready.
[ 1.911222] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.916396] hda_codec: ALC1150: SKU not ready 0x00000000
[ 1.918455] [drm] Loading CEDAR Microcode
[ 1.924339] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2
[ 1.924394] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[ 1.924436] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 1.924464] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 1.924487] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 1.924525] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 1.924562] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 1.924766] ACPI Warning: 0x0000000000001860-0x000000000000187f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 1.924770] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.924772] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 1.924774] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 1.924775] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.924777] ACPI Warning: 0x0000000000001c00-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20120320/utaddress-251)
[ 1.924779] ACPI Warning: 0x0000000000001c00-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20120320/utaddress-251)
[ 1.924780] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.924781] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.929140] cfg80211: World regulatory domain updated:
[ 1.929142] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1.929144] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1.929145] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1.929145] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1.929146] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1.929147] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1.957271] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x10
[ 1.957919] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x10
[ 1.958586] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x10
[ 1.959174] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x10
[ 1.959728] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x10
[ 1.960298] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x10
[ 1.960881] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x10
[ 1.961472] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 1.969591] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 1.969696] radeon 0000:02:00.0: WB enabled
[ 1.969698] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88020d146c00
[ 1.969700] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.969700] [drm] Driver supports precise vblank timestamp query.
[ 1.969730] radeon 0000:02:00.0: irq 66 for MSI/MSI-X
[ 1.969743] radeon 0000:02:00.0: radeon: using MSI.
[ 1.969764] [drm] radeon: irq initialized.
[ 1.984078] usbcore: registered new interface driver usbhid
[ 1.984080] usbhid: USB HID core driver
[ 1.985338] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input9
[ 1.985430] hid-generic 0003:0A81:0101.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:14.0-1/input0
[ 1.985997] [drm] ring test on 0 succeeded in 1 usecs
[ 1.986136] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.986320] [drm] Radeon Display Connectors
[ 1.986321] [drm] Connector 0:
[ 1.986322] [drm] HDMI-A-1
[ 1.986323] [drm] HPD2
[ 1.986325] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 1.986326] [drm] Encoders:
[ 1.986327] [drm] DFP1: INTERNAL_UNIPHY1
[ 1.986328] [drm] Connector 1:
[ 1.986329] [drm] DVI-I-1
[ 1.986330] [drm] HPD4
[ 1.986332] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 1.986332] [drm] Encoders:
[ 1.986334] [drm] DFP2: INTERNAL_UNIPHY
[ 1.986335] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.986336] [drm] Connector 2:
[ 1.986337] [drm] VGA-1
[ 1.986338] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 1.986339] [drm] Encoders:
[ 1.986340] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 1.986377] [drm] Internal thermal controller with fan control
[ 1.986400] [drm] radeon: power management initialized
[ 1.994517] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/input/input10
[ 1.994575] hid-generic 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:14.0-1/input1
[ 1.994679] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.2/input/input11
[ 1.995044] hid-generic 0003:0A81:0101.0003: input,hidraw2: USB HID v1.10 Mouse [CHESEN USB Keyboard] on usb-0000:00:14.0-1/input2
[ 2.024724] [drm] fb mappable at 0xE0142000
[ 2.024726] [drm] vram apper at 0xE0000000
[ 2.024726] [drm] size 5242880
[ 2.024727] [drm] fb depth is 24
[ 2.024727] [drm] pitch is 5120
[ 2.024756] fbcon: radeondrmfb (fb0) is primary device
[ 2.024805] Console: switching to colour frame buffer device 160x64
[ 2.024818] fb0: radeondrmfb frame buffer device
[ 2.024819] drm: registered panic notifier
[ 2.024822] [drm] Initialized radeon 2.18.0 20080528 for 0000:02:00.0 on minor 0
[ 2.024868] hda-intel: 0000:02:00.1: Handle VGA-switcheroo audio client
[ 2.024925] snd_hda_intel 0000:02:00.1: irq 67 for MSI/MSI-X
[ 2.038209] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input12
[ 2.050032] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 2.109469] init: failsafe main process (884) killed by TERM signal
[ 2.126988] Bluetooth: Core ver 2.16
[ 2.127000] NET: Registered protocol family 31
[ 2.127002] Bluetooth: HCI device and connection manager initialized
[ 2.127003] Bluetooth: HCI socket layer initialized
[ 2.127004] Bluetooth: L2CAP socket layer initialized
[ 2.127009] Bluetooth: SCO socket layer initialized
[ 2.127855] Bluetooth: RFCOMM TTY layer initialized
[ 2.127861] Bluetooth: RFCOMM socket layer initialized
[ 2.127865] Bluetooth: RFCOMM ver 1.11
[ 2.128224] ppdev: user-space parallel port driver
[ 2.129802] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.129804] Bluetooth: BNEP filters: protocol multicast
[ 2.137597] type=1400 audit(1380835672.013:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=959 comm="apparmor_parser"
[ 2.137815] type=1400 audit(1380835672.013:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=959 comm="apparmor_parser"
[ 2.229858] usb 3-9: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 2.276504] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
[ 2.376884] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
[ 2.377280] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 2.377452] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 2.393416] type=1400 audit(1380835672.269:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1002 comm="apparmor_parser"
[ 2.467437] ath9k_htc 3-9:1.0: ath9k_htc: HTC initialized with 33 credits
[ 2.735417] ath9k_htc 3-9:1.0: ath9k_htc: FW Version: 1.3
[ 2.735419] ath: EEPROM regdomain: 0x809c
[ 2.735420] ath: EEPROM indicates we should expect a country code
[ 2.735421] ath: doing EEPROM country->regdmn map search
[ 2.735421] ath: country maps to regdmn code: 0x52
[ 2.735422] ath: Country alpha2 being used: CN
[ 2.735423] ath: Regpair used: 0x52
[ 2.735424] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2.735425] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.735426] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2.735427] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.735428] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2.735428] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.735429] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2.735430] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.735430] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2.735431] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.735432] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2.735433] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.735433] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2.735434] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.735435] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2.735435] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.735436] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2.735437] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.735437] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2.735438] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.735439] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2.735440] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.735440] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 2.735441] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 2.735442] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 2.739424] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2.739426] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.739427] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2.739428] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.739428] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2.739429] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.739430] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2.739431] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.739431] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2.739432] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.739433] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2.739434] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.739434] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2.739435] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.739436] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2.739436] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.739437] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2.739438] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.739439] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2.739439] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.739440] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2.739441] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.739442] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 2.739442] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.739443] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 2.739444] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.739445] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 2.739445] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3.217693] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.217932] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.223887] ieee80211 phy0: Atheros AR9271 Rev:1
[ 3.223902] cfg80211: Calling CRDA for country: CN
[ 3.226091] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 3.226094] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.226096] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 3.226097] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.226099] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 3.226100] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.226101] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 3.226103] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.226104] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 3.226105] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.226107] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 3.226108] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.226109] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 3.226110] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.226111] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 3.226112] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.226113] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 3.226114] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.226115] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 3.226116] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.226117] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 3.226119] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.226120] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 3.226121] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.226122] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 3.226124] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.226125] cfg80211: Disabling freq 2484 MHz
[ 3.226128] cfg80211: Regulatory domain changed to country: CN
[ 3.226129] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.226130] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3.226131] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 3.226138] Registered led device: ath9k_htc-phy0
[ 3.654837] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.655475] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.698493] wlan0: authenticate with 00:12:5f:03:58:20
[ 7.974236] wlan0: send auth to 00:12:5f:03:58:20 (try 1/3)
[ 7.975858] wlan0: authenticated
[ 8.113458] wlan0: associate with 00:12:5f:03:58:20 (try 1/3)
[ 8.123178] wlan0: RX AssocResp from 00:12:5f:03:58:20 (capab=0x411 status=0 aid=2)
[ 8.133756] wlan0: associated
[ 8.134101] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8.134139] cfg80211: Calling CRDA for country: TW
[ 8.135986] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 8.135987] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.135988] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 8.135989] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.135990] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 8.135990] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.135991] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 8.135992] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.135992] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 8.135993] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.135994] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 8.135995] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.135995] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 8.135996] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.135997] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 8.135997] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.135998] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 8.135999] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.135999] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 8.136000] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.136001] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 8.136001] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.136002] cfg80211: Disabling freq 2467 MHz
[ 8.136003] cfg80211: Disabling freq 2472 MHz
[ 8.136003] cfg80211: Disabling freq 2484 MHz
[ 8.136005] cfg80211: Regulatory domain changed to country: TW
[ 8.136006] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.136006] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.136007] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 8.136008] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 843.963445] audit_printk_skb: 51 callbacks suppressed
[ 843.963448] type=1400 audit(1380836514.700:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=963 comm="cupsd" pid=963 comm="cupsd" capability=36 capname="block_suspend"