dmesg - m4
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-31-generic (buildd@panlong) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #46-Ubuntu SMP Tue Sep 10 20:03:44 UTC 2013 (Ubuntu 3.8.0-31.46-generic 3.8.13.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bc94afff] usable
BIOS-e820: [mem 0x00000000bc94b000-0x00000000bcf2cfff] reserved
BIOS-e820: [mem 0x00000000bcf2d000-0x00000000bd243fff] ACPI NVS
BIOS-e820: [mem 0x00000000bd244000-0x00000000bd347fff] reserved
BIOS-e820: [mem 0x00000000bd348000-0x00000000bd348fff] usable
BIOS-e820: [mem 0x00000000bd349000-0x00000000bd3cefff] ACPI NVS
BIOS-e820: [mem 0x00000000bd3cf000-0x00000000bd7fffff] usable
BIOS-e820: [mem 0x00000000d0000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000103fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X79 Extreme9, BIOS P3.60 07/24/2013
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x1040000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FF000000000 write-back
1 base 001000000000 mask 3FFFC0000000 write-back
2 base 0000BE000000 mask 3FFFFE000000 uncachable
3 base 0000C0000000 mask 3FFFC0000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 64GB, type WB
reg 1, base: 64GB, range: 1GB, type WB
reg 2, base: 3040MB, range: 32MB, type UC
reg 3, base: 3GB, range: 1GB, type UC
total RAM covered: 65504M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3040MB, range: 32MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 16GB, type WB
reg 6, base: 32GB, range: 32GB, type WB
reg 7, base: 64GB, range: 1GB, type WB
e820: update [mem 0xbe000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdab0-0x000fdabf] mapped at [ffff8800000fdab0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xbd7fffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0xbd7fffff] page 2M
kernel direct mapping tables up to 0xbd7fffff @ [mem 0x1fffe000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x103fffffff]
[mem 0x100000000-0x103fffffff] page 1G
kernel direct mapping tables up to 0x103fffffff @ [mem 0xbd7ff000-0xbd7fffff]
RAMDISK: [mem 0x35eaa000-0x36f4cfff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000bd164080 00084 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bd16dc10 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000bd1641a0 09A69 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bd241f80 00040
ACPI: APIC 00000000bd16dd08 000C8 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000bd16ddd0 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000bd16de18 0003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: AAFT 00000000bd16de58 000BA (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 00000000bd16df18 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000bd16df50 CD380 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: EINJ 00000000bd23b2d0 00130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 00000000bd23b400 00210 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 00000000bd23b610 000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 00000000bd23b6b8 00030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: DMAR 00000000bd23b6e8 000BC (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000103fffffff]
Initmem setup node 0 [mem 0x00000000-0x103fffffff]
NODE_DATA [mem 0x103fffb000-0x103fffffff]
[ffffea0000000000-ffffea0040ffffff] PMD -> [ffff880fff600000-ffff88103f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x103fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0xbc94afff]
node 0: [mem 0xbd348000-0xbd348fff]
node 0: [mem 0xbd3cf000-0xbd7fffff]
node 0: [mem 0x100000000-0x103fffffff]
On node 0 totalpages: 16764170
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 12022 pages used for memmap
DMA32 zone: 757383 pages, LIFO batch:31
Normal zone: 249856 pages used for memmap
Normal zone: 15740928 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bc94b000 - 00000000bcf2d000
PM: Registered nosave memory: 00000000bcf2d000 - 00000000bd244000
PM: Registered nosave memory: 00000000bd244000 - 00000000bd348000
PM: Registered nosave memory: 00000000bd349000 - 00000000bd3cf000
PM: Registered nosave memory: 00000000bd800000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xe0000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88103fc00000 s84928 r8192 d21568 u262144
pcpu-alloc: s84928 r8192 d21568 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16502222
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 65908264k/68157440k available (7014k kernel code, 1100760k absent, 1148416k reserved, 6228k data, 996k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
NR_IRQS:16640 nr_irqs:1152 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 268435456 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3599.632 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7199.26 BogoMIPS (lpj=14398528)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 16 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26713 entries in 105 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffc000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0462 ecap f020fe
dmar: RMRR base: 0x000000bcee0000 end: 0x000000bcf0afff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0
IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0
HPET id 0 under DRHD base 0xfbffc000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (fam: 06, model: 2d, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (57594.11 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbcf2d000-0xbd243fff] (3239936 bytes)
PM: Registering ACPI NVS region [mem 0xbd349000-0xbd3cefff] (548864 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000)
PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
_OSC request data:1 1f
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcc000000-0xfbffffff]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:3c03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 10: [mem 0xfbf09000-0xfbf09fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xfbf08000-0xfbf0800f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xfbf07000-0xfbf073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xfbf00000-0xfbf03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:1d1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xfbf06000-0xfbf063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xfbf05000-0xfbf057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xfbf04000-0xfbf040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [8086:0370] type 01 class 0x060400
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.2: [8086:0372] type 01 class 0x060400
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 01-03]
pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
pci 0000:02:0e.0: [1000:0411] type 00 class 0x010400
pci 0000:02:0e.0: reg 10: [mem 0xf0200000-0xf020ffff pref]
pci 0000:02:0e.0: reg 18: [mem 0xfbe00000-0xfbe1ffff]
pci 0000:02:0e.0: reg 30: [mem 0xfbe20000-0xfbe27fff pref]
pci 0000:02:0e.0: supports D1
pci 0000:01:00.0: PCI bridge to [bus 02]
pci 0000:01:00.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:01:00.0: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
pci 0000:01:00.2: PCI bridge to [bus 03]
pci 0000:00:01.1: PCI bridge to [bus 04]
pci 0000:05:00.0: [1002:6798] type 00 class 0x030000
pci 0000:05:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:05:00.0: reg 18: [mem 0xfbd00000-0xfbd3ffff 64bit]
pci 0000:05:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:05:00.0: reg 30: [mem 0xfbd40000-0xfbd5ffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D1 D2 D3hot
pci 0000:05:00.1: [1002:aaa0] type 00 class 0x040300
pci 0000:05:00.1: reg 10: [mem 0xfbd60000-0xfbd63fff 64bit]
pci 0000:05:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 05]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 06]
pci 0000:00:11.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [14e4:16b1] type 00 class 0x020000
pci 0000:08:00.0: reg 10: [mem 0xf0110000-0xf011ffff 64bit pref]
pci 0000:08:00.0: reg 18: [mem 0xf0100000-0xf010ffff 64bit pref]
pci 0000:08:00.0: reg 30: [mem 0xfbc00000-0xfbc007ff pref]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:00:1c.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
pci 0000:09:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:09:00.0: reg 10: [io 0xd040-0xd047]
pci 0000:09:00.0: reg 14: [io 0xd030-0xd033]
pci 0000:09:00.0: reg 18: [io 0xd020-0xd027]
pci 0000:09:00.0: reg 1c: [io 0xd010-0xd013]
pci 0000:09:00.0: reg 20: [io 0xd000-0xd00f]
pci 0000:09:00.0: reg 24: [mem 0xfbb10000-0xfbb101ff]
pci 0000:09:00.0: reg 30: [mem 0xfbb00000-0xfbb0ffff pref]
pci 0000:09:00.0: PME# supported from D3hot
pci 0000:00:1c.1: PCI bridge to [bus 09]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:0a:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:0a:00.0: reg 10: [io 0xc040-0xc047]
pci 0000:0a:00.0: reg 14: [io 0xc030-0xc033]
pci 0000:0a:00.0: reg 18: [io 0xc020-0xc027]
pci 0000:0a:00.0: reg 1c: [io 0xc010-0xc013]
pci 0000:0a:00.0: reg 20: [io 0xc000-0xc00f]
pci 0000:0a:00.0: reg 24: [mem 0xfba10000-0xfba101ff]
pci 0000:0a:00.0: reg 30: [mem 0xfba00000-0xfba0ffff pref]
pci 0000:0a:00.0: PME# supported from D3hot
pci 0000:00:1c.2: PCI bridge to [bus 0a]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:0b:00.0: [10b5:8605] type 01 class 0x060400
pci 0000:0b:00.0: reg 10: [mem 0xfb600000-0xfb603fff]
pci 0000:0b:00.0: supports D1 D2
pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 0b-0f]
pci 0000:00:1c.3: bridge window [io 0x9000-0xafff]
pci 0000:00:1c.3: bridge window [mem 0xfb300000-0xfb6fffff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:0c:01.0: [10b5:8605] type 01 class 0x060400
pci 0000:0c:01.0: supports D1 D2
pci 0000:0c:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0c:02.0: [10b5:8605] type 01 class 0x060400
pci 0000:0c:02.0: supports D1 D2
pci 0000:0c:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0c:03.0: [10b5:8605] type 01 class 0x060400
pci 0000:0c:03.0: supports D1 D2
pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0b:00.0: PCI bridge to [bus 0c-0f]
pci 0000:0b:00.0: bridge window [io 0x9000-0xafff]
pci 0000:0b:00.0: bridge window [mem 0xfb300000-0xfb5fffff]
pci 0000:0b:00.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:0d:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:0d:00.0: reg 10: [mem 0xfb500000-0xfb5007ff 64bit]
pci 0000:0d:00.0: reg 18: [io 0xa000-0xa0ff]
pci 0000:0d:00.0: supports D2
pci 0000:0d:00.0: PME# supported from D2 D3hot D3cold
pci 0000:0c:01.0: PCI bridge to [bus 0d]
pci 0000:0c:01.0: bridge window [io 0xa000-0xafff]
pci 0000:0c:01.0: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:0e:00.0: [14e4:16b1] type 00 class 0x020000
pci 0000:0e:00.0: reg 10: [mem 0xf0010000-0xf001ffff 64bit pref]
pci 0000:0e:00.0: reg 18: [mem 0xf0000000-0xf000ffff 64bit pref]
pci 0000:0e:00.0: reg 30: [mem 0xfb400000-0xfb4007ff pref]
pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:02.0: PCI bridge to [bus 0e]
pci 0000:0c:02.0: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:0c:02.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:0f:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:0f:00.0: reg 10: [io 0x9040-0x9047]
pci 0000:0f:00.0: reg 14: [io 0x9030-0x9033]
pci 0000:0f:00.0: reg 18: [io 0x9020-0x9027]
pci 0000:0f:00.0: reg 1c: [io 0x9010-0x9013]
pci 0000:0f:00.0: reg 20: [io 0x9000-0x900f]
pci 0000:0f:00.0: reg 24: [mem 0xfb310000-0xfb3101ff]
pci 0000:0f:00.0: reg 30: [mem 0xfb300000-0xfb30ffff pref]
pci 0000:0f:00.0: PME# supported from D3hot
pci 0000:0c:03.0: PCI bridge to [bus 0f]
pci 0000:0c:03.0: bridge window [io 0x9000-0x9fff]
pci 0000:0c:03.0: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:10:00.0: [1b4b:9220] type 00 class 0x010601
pci 0000:10:00.0: reg 10: [io 0xb050-0xb057]
pci 0000:10:00.0: reg 14: [io 0xb040-0xb043]
pci 0000:10:00.0: reg 18: [io 0xb030-0xb037]
pci 0000:10:00.0: reg 1c: [io 0xb020-0xb023]
pci 0000:10:00.0: reg 20: [io 0xb000-0xb01f]
pci 0000:10:00.0: reg 24: [mem 0xfb910000-0xfb9107ff]
pci 0000:10:00.0: reg 30: [mem 0xfb900000-0xfb90ffff pref]
pci 0000:10:00.0: PME# supported from D3hot
pci 0000:00:1c.4: PCI bridge to [bus 10]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:11:00.0: [104c:8241] type 00 class 0x0c0330
pci 0000:11:00.0: reg 10: [mem 0xfb800000-0xfb80ffff 64bit]
pci 0000:11:00.0: reg 18: [mem 0xfb810000-0xfb811fff 64bit]
pci 0000:11:00.0: supports D1 D2
pci 0000:11:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 11]
pci 0000:00:1c.6: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:12:00.0: [104c:8241] type 00 class 0x0c0330
pci 0000:12:00.0: reg 10: [mem 0xfb700000-0xfb70ffff 64bit]
pci 0000:12:00.0: reg 18: [mem 0xfb710000-0xfb711fff 64bit]
pci 0000:12:00.0: supports D1 D2
pci 0000:12:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 12]
pci 0000:00:1c.7: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:00:1e.0: PCI bridge to [bus 13] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xcc000000-0xfbffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.BR30._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.BR30.BR41._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.BR30.BR42._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.BR30.BR43._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x11) granted
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
pci0000:ff: Requesting ACPI _OSC control (0x1d)
pci0000:ff: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:05:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbc94b000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd349000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0510 (active)
pnp 00:06: [dma 4]
pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0b: [io 0x0400-0x0453] has been reserved
system 00:0b: [io 0x0458-0x047f] has been reserved
system 00:0b: [io 0x1180-0x119f] has been reserved
system 00:0b: [io 0x0500-0x057f] has been reserved
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:0c: [io 0x0454-0x0457] has been reserved
system 00:0c: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:0c:01.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0d] add_size 200000
pci 0000:01:00.0: PCI bridge to [bus 02]
pci 0000:01:00.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:01:00.0: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
pci 0000:01:00.2: PCI bridge to [bus 03]
pci 0000:00:01.0: PCI bridge to [bus 01-03]
pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
pci 0000:00:01.1: PCI bridge to [bus 04]
pci 0000:00:02.0: PCI bridge to [bus 05]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 06]
pci 0000:00:11.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:00:1c.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 09]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.2: PCI bridge to [bus 0a]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:0c:01.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:0c:01.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:0c:01.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:0c:01.0: PCI bridge to [bus 0d]
pci 0000:0c:01.0: bridge window [io 0xa000-0xafff]
pci 0000:0c:01.0: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:0c:02.0: PCI bridge to [bus 0e]
pci 0000:0c:02.0: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:0c:02.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:0c:03.0: PCI bridge to [bus 0f]
pci 0000:0c:03.0: bridge window [io 0x9000-0x9fff]
pci 0000:0c:03.0: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:0b:00.0: PCI bridge to [bus 0c-0f]
pci 0000:0b:00.0: bridge window [io 0x9000-0xafff]
pci 0000:0b:00.0: bridge window [mem 0xfb300000-0xfb5fffff]
pci 0000:0b:00.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 0b-0f]
pci 0000:00:1c.3: bridge window [io 0x9000-0xafff]
pci 0000:00:1c.3: bridge window [mem 0xfb300000-0xfb6fffff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 10]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:1c.6: PCI bridge to [bus 11]
pci 0000:00:1c.6: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1c.7: PCI bridge to [bus 12]
pci 0000:00:1c.7: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:00:1e.0: PCI bridge to [bus 13]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xcc000000-0xfbffffff]
pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xf0200000-0xf02fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf02fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:05: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:08: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:09: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:0a: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:0b: resource 0 [io 0x9000-0xafff]
pci_bus 0000:0b: resource 1 [mem 0xfb300000-0xfb6fffff]
pci_bus 0000:0b: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:0c: resource 0 [io 0x9000-0xafff]
pci_bus 0000:0c: resource 1 [mem 0xfb300000-0xfb5fffff]
pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:0d: resource 0 [io 0xa000-0xafff]
pci_bus 0000:0d: resource 1 [mem 0xfb500000-0xfb5fffff]
pci_bus 0000:0e: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:0e: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:0f: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:0f: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:10: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:10: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:11: resource 1 [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:12: resource 1 [mem 0xfb700000-0xfb7fffff]
pci_bus 0000:13: resource 4 [io 0x0000-0x03af]
pci_bus 0000:13: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:13: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:13: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:13: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:13: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:13: resource 10 [mem 0xcc000000-0xfbffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: rerouting interrupts for [8086:0370]
pci 0000:01:00.2: rerouting interrupts for [8086:0372]
pci 0000:05:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17036k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb894b000-0xbc94b000] (64MB) mapped at [ffff8800b894b000-ffff8800bc94afff]
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1380218118.624:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 32768
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:0b:00.0: irq 65 for MSI/MSI-X
pcieport 0000:0c:01.0: irq 66 for MSI/MSI-X
pcieport 0000:0c:02.0: irq 67 for MSI/MSI-X
pcieport 0000:0c:03.0: irq 68 for MSI/MSI-X
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:0c:01.0:pcie24: HPC vendor_id 10b5 device_id 8605 ss_vid 10b5 ss_did 8605
pciehp 0000:0c:01.0:pcie24: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbf07000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-31-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbf06000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-31-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:11:00.0: xHCI Host Controller
xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:11:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:11:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:11:00.0: irq 71 for MSI/MSI-X
xhci_hcd 0000:11:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:11:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:11:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:11:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:11:00.0: irq 76 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-31-generic xhci_hcd
usb usb3: SerialNumber: 0000:11:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:11:00.0: xHCI Host Controller
xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-31-generic xhci_hcd
usb usb4: SerialNumber: 0000:11:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:12:00.0: xHCI Host Controller
xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:12:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:12:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:12:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:12:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:12:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:12:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:12:00.0: irq 83 for MSI/MSI-X
xhci_hcd 0000:12:00.0: irq 84 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-31-generic xhci_hcd
usb usb5: SerialNumber: 0000:12:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:12:00.0: xHCI Host Controller
xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.0-31-generic xhci_hcd
usb usb6: SerialNumber: 0000:12:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: beedac769733b6dde22c1ae0d3a2045ac52087e1'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:07: setting system clock to 2013-09-26 17:55:18 UTC (1380218118)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 996k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1168k freed
Freeing unused kernel memory: 1076k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
udevd[127]: starting version 175
Disabling lock debugging due to kernel taint
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 85 for MSI/MSI-X
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
megasas: 06.504.01.00-rc1 Mon. Oct. 1 17:00:00 PDT 2012
megasas: 0x1000:0x0411:0x1000:0x1004: bus 2:slot 14:func 0
megasas: FW now in Ready state
tg3.c:v3.128 (December 03, 2012)
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
megasas_init_mfi: fw_support_ieee=0
megasas: INIT adapter done
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05100 irq 85
ata2: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05180 irq 85
ata3: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05200 irq 85
ata4: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05280 irq 85
ata5: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05300 irq 85
ata6: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05380 irq 85
ahci 0000:09:00.0: irq 86 for MSI/MSI-X
ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi7 : ahci
scsi8 : ahci
ata7: SATA max UDMA/133 abar m512@0xfbb10000 port 0xfbb10100 irq 86
ata8: SATA max UDMA/133 abar m512@0xfbb10000 port 0xfbb10180 irq 86
ahci 0000:0a:00.0: irq 87 for MSI/MSI-X
ahci 0000:0a:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0a:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi9 : ahci
scsi10 : ahci
ata9: SATA max UDMA/133 abar m512@0xfba10000 port 0xfba10100 irq 87
ata10: SATA max UDMA/133 abar m512@0xfba10000 port 0xfba10180 irq 87
ahci 0000:0f:00.0: irq 88 for MSI/MSI-X
ahci 0000:0f:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0f:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi11 : ahci
scsi12 : ahci
ata11: SATA max UDMA/133 abar m512@0xfb310000 port 0xfb310100 irq 88
ata12: SATA max UDMA/133 abar m512@0xfb310000 port 0xfb310180 irq 88
ahci 0000:10:00.0: irq 89 for MSI/MSI-X
raid6: sse2x1 8758 MB/s
firewire_ohci 0000:0d:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
ahci 0000:10:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:10:00.0: flags: 64bit ncq pio
scsi13 : ahci
scsi14 : ahci
scsi15 : ahci
scsi16 : ahci
scsi17 : ahci
scsi18 : ahci
scsi19 : ahci
scsi20 : ahci
ata13: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910100 irq 89
ata14: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910180 irq 89
ata15: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910200 irq 89
ata16: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910280 irq 89
ata17: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910300 irq 89
ata18: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910380 irq 89
ata19: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910400 irq 89
ata20: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910480 irq 89
scsi0 : LSI SAS based MegaRAID driver
megaraid_sas: fw state:c0000000
megasas: fwstate:c0000000, dis_OCR=0
scsi 0:0:29:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5
scsi 0:0:30:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5
scsi 0:0:31:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5
scsi 0:0:33:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5
scsi 0:0:34:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5
scsi 0:0:35:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5
raid6: sse2x2 12302 MB/s
scsi 0:2:0:0: Direct-Access LSI MegaRAID 8308ELP 1.12 PQ: 0 ANSI: 5
scsi 0:2:1:0: Direct-Access LSI MegaRAID 8308ELP 1.12 PQ: 0 ANSI: 5
scsi 0:2:2:0: Direct-Access LSI MegaRAID 8308ELP 1.12 PQ: 0 ANSI: 5
scsi 0:2:3:0: Direct-Access LSI MegaRAID 8308ELP 1.12 PQ: 0 ANSI: 5
scsi 0:2:4:0: Direct-Access LSI MegaRAID 8308ELP 1.12 PQ: 0 ANSI: 5
scsi 0:2:5:0: Direct-Access LSI MegaRAID 8308ELP 1.12 PQ: 0 ANSI: 5
sd 0:2:0:0: Attached scsi generic sg0 type 0
sd 0:2:0:0: [sda] 285155328 512-byte logical blocks: (145 GB/135 GiB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 10 08
sd 0:2:1:0: Attached scsi generic sg1 type 0
sd 0:2:1:0: [sdb] 285155328 512-byte logical blocks: (145 GB/135 GiB)
sd 0:2:0:0: [sda] Write cache: disabled, read cache: disabled, supports DPO and FUA
sd 0:2:1:0: [sdb] Write Protect is off
sd 0:2:1:0: [sdb] Mode Sense: 1f 00 10 08
sd 0:2:2:0: [sdc] 285155328 512-byte logical blocks: (145 GB/135 GiB)
sd 0:2:1:0: [sdb] Write cache: disabled, read cache: disabled, supports DPO and FUA
sd 0:2:2:0: Attached scsi generic sg2 type 0
sd 0:2:2:0: [sdc] Write Protect is off
sd 0:2:2:0: [sdc] Mode Sense: 1f 00 10 08
sd 0:2:2:0: [sdc] Write cache: disabled, read cache: disabled, supports DPO and FUA
sd 0:2:3:0: Attached scsi generic sg3 type 0
sd 0:2:3:0: [sdd] 285155328 512-byte logical blocks: (145 GB/135 GiB)
sd 0:2:4:0: Attached scsi generic sg4 type 0
sd 0:2:3:0: [sdd] Write Protect is off
sd 0:2:3:0: [sdd] Mode Sense: 1f 00 10 08
sd 0:2:4:0: [sde] 285155328 512-byte logical blocks: (145 GB/135 GiB)
sd 0:2:3:0: [sdd] Write cache: disabled, read cache: disabled, supports DPO and FUA
sd 0:2:5:0: Attached scsi generic sg5 type 0
sd 0:2:5:0: [sdf] 285155328 512-byte logical blocks: (145 GB/135 GiB)
sd 0:2:4:0: [sde] Write Protect is off
sd 0:2:4:0: [sde] Mode Sense: 1f 00 10 08
sd 0:2:4:0: [sde] Write cache: disabled, read cache: disabled, supports DPO and FUA
sd 0:2:5:0: [sdf] Write Protect is off
sd 0:2:5:0: [sdf] Mode Sense: 1f 00 10 08
sd 0:2:5:0: [sdf] Write cache: disabled, read cache: disabled, supports DPO and FUA
sdb: sdb1
sdc: sdc1
sd 0:2:1:0: [sdb] Attached SCSI disk
sd 0:2:2:0: [sdc] Attached SCSI disk
sdf: sdf1
sd 0:2:5:0: [sdf] Attached SCSI disk
sde: sde1
sdd: sdd1
sd 0:2:4:0: [sde] Attached SCSI disk
sd 0:2:3:0: [sdd] Attached SCSI disk
sda: sda1
sd 0:2:0:0: [sda] Attached SCSI disk
raid6: sse2x4 14270 MB/s
raid6: using algorithm sse2x4 (14270 MB/s)
raid6: using ssse3x2 recovery algorithm
async_tx: api initialized (async)
xor: automatically using best checksumming function:
avx : 28122.000 MB/sec
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
tg3 0000:08:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:af:7c:cf
tg3 0000:08:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:08:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:08:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
usb 1-1: new high-speed USB device number 2 using ehci-pci
tg3 0000:0e:00.0 eth1: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:af:7e:a4
tg3 0000:0e:00.0 eth1: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:0e:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:0e:00.0 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
ata2: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA M4-CT256M4SSD2 070H PQ: 0 ANSI: 5
sd 1:0:0:0: [sdg] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 1:0:0:0: Attached scsi generic sg6 type 0
sd 1:0:0:0: [sdg] Write Protect is off
sd 1:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdg: sdg1 sdg2 sdg3 sdg4 < sdg5 >
sd 1:0:0:0: [sdg] Attached SCSI disk
ata3.00: ATA-7: WDC WD1500ADFS-00SLR5, 21.07QR5, max UDMA/133
ata3.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-8: WDC WD1500HLFS-01G6U0, 04.04V01, max UDMA/133
ata5.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD1500ADFS-0 21.0 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg7 type 0
sd 3:0:0:0: [sdh] 293046768 512-byte logical blocks: (150 GB/139 GiB)
sd 3:0:0:0: [sdh] Write Protect is off
sd 3:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: ATAPI: HL-DT-ST BDDVDRW UH12NS29, 1.00, max UDMA/133
ata5.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA WDC WD1500HLFS-0 04.0 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdi] 293046768 512-byte logical blocks: (150 GB/139 GiB)
sd 5:0:0:0: Attached scsi generic sg8 type 0
sd 5:0:0:0: [sdi] Write Protect is off
sd 5:0:0:0: [sdi] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: configured for UDMA/133
sdi: sdi1 sdi2 sdi3
sd 5:0:0:0: [sdi] Attached SCSI disk
ata14: SATA link down (SStatus 0 SControl 300)
ata15: SATA link down (SStatus 0 SControl 300)
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
scsi 6:0:0:0: CD-ROM HL-DT-ST BDDVDRW UH12NS29 1.00 PQ: 0 ANSI: 5
ata13: SATA link down (SStatus 0 SControl 300)
ata19: SATA link down (SStatus 0 SControl 300)
ata18: SATA link down (SStatus 0 SControl 300)
ata20: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata17: SATA link down (SStatus 0 SControl 300)
ata16: SATA link down (SStatus 0 SControl 300)
ata20.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata20.00: configured for UDMA/66
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg9 type 5
sdh: sdh1 sdh2 sdh3 < sdh5 sdh6 >
sd 3:0:0:0: [sdh] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata10.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata10.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata10.00: configured for UDMA/133
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata9.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata9.00: configured for UDMA/133
firewire_core 0000:0d:00.0: created device fw0: GUID 008f130090591400, S400
ata8.00: ATA-7: ST3500630AS, 3.AAE, max UDMA/133
ata8.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata8.00: configured for UDMA/133
scsi 8:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
sd 8:0:0:0: Attached scsi generic sg10 type 0
sd 8:0:0:0: [sdj] 976773168 512-byte logical blocks: (500 GB/465 GiB)
scsi 9:0:0:0: Direct-Access ATA TOSHIBA DT01ACA3 MX6O PQ: 0 ANSI: 5
sd 8:0:0:0: [sdj] Write Protect is off
sd 8:0:0:0: [sdj] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 9:0:0:0: [sdk] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 9:0:0:0: [sdk] 4096-byte physical blocks
sd 9:0:0:0: Attached scsi generic sg11 type 0
sd 9:0:0:0: [sdk] Write Protect is off
sd 9:0:0:0: [sdk] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 10:0:0:0: Direct-Access ATA TOSHIBA DT01ACA3 MX6O PQ: 0 ANSI: 5
sd 10:0:0:0: [sdl] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 10:0:0:0: [sdl] 4096-byte physical blocks
sd 10:0:0:0: Attached scsi generic sg12 type 0
sd 10:0:0:0: [sdl] Write Protect is off
sd 10:0:0:0: [sdl] Mode Sense: 00 3a 00 00
sd 10:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 20:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
scsi 20:0:0:0: Attached scsi generic sg13 type 3
sdj: sdj1
sd 8:0:0:0: [sdj] Attached SCSI disk
sdk: sdk1 sdk2
sd 9:0:0:0: [sdk] Attached SCSI disk
sdl: sdl1
sd 10:0:0:0: [sdl] Attached SCSI disk
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md/raid10:md127: active with 6 out of 6 devices
md127: detected capacity change from 0 to 437591212032
md127: unknown partition table
tsc: Refined TSC clocksource calibration: 3599.958 MHz
Switching to clocksource tsc
usb 2-1.3: new high-speed USB device number 3 using ehci-pci
bio: create slab at 1
usb 2-1.3: New USB device found, idVendor=04f2, idProduct=b11c
usb 2-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 2-1.3: Product: ASUS USB2.0 Webcam
usb 2-1.3: Manufacturer: Chicony Electronics Co., Ltd.
usb 2-1.4: new high-speed USB device number 4 using ehci-pci
EXT4-fs (sdh5): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1.4: New USB device found, idVendor=1a40, idProduct=0101
usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.4: Product: USB 2.0 Hub
hub 2-1.4:1.0: USB hub found
hub 2-1.4:1.0: 4 ports detected
usb 2-1.4.4: new low-speed USB device number 5 using ehci-pci
usb 2-1.4.4: New USB device found, idVendor=045e, idProduct=0040
usb 2-1.4.4: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 2-1.4.4: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 2-1.4.4: Manufacturer: Microsoft
init: ureadahead main process (503) terminated with status 5
Adding 32226300k swap on /dev/sdh6. Priority:-1 extents:1 across:32226300k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
udevd[592]: starting version 175
lp: driver loaded but no devices found
w83627ehf: Found NCT6776F chip at 0x290
wmi: Mapper loaded
EDAC MC: Ver: 3.0.0
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPR2 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPR2 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
microcode: CPU0 sig=0x206d7, pf=0x4, revision=0x710
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 90 for MSI/MSI-X
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
microcode: CPU1 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU2 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU3 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU4 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU5 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU6 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU7 sig=0x206d7, pf=0x4, revision=0x710
microcode: Microcode Update Driver: v2.00 , Peter Oruba
snd_hda_intel 0000:00:1b.0: irq 91 for MSI/MSI-X
EXT4-fs (sdh5): re-mounted. Opts: errors=remount-ro
hda-intel 0000:05:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:05:00.1: Force to non-snoop mode
snd_hda_intel 0000:05:00.1: irq 92 for MSI/MSI-X
EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null)
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input3
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input4
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input5
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input8
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.4/2-1.4.4:1.0/input/input9
hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.4.4/input0
Linux video capture interface: v2.00
EXT4-fs (sdh2): mounted filesystem with ordered data mode. Opts: (null)
type=1400 audit(1380236126.018:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=925 comm="apparmor_parser"
type=1400 audit(1380236126.018:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=955 comm="apparmor_parser"
type=1400 audit(1380236126.018:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=841 comm="apparmor_parser"
type=1400 audit(1380236126.018:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=925 comm="apparmor_parser"
type=1400 audit(1380236126.018:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=955 comm="apparmor_parser"
type=1400 audit(1380236126.018:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=841 comm="apparmor_parser"
type=1400 audit(1380236126.018:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=925 comm="apparmor_parser"
type=1400 audit(1380236126.018:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=955 comm="apparmor_parser"
type=1400 audit(1380236126.018:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=841 comm="apparmor_parser"
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdh1): using internal journal
EXT3-fs (sdh1): mounted filesystem with ordered data mode
uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (04f2:b11c)
input: ASUS USB2.0 Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 63159 MBytes.
[fglrx] vendor: 1002 device: 6798 count: 1
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 13.20.5 [Aug 15 2013] with 1 minors
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
tg3 0000:08:00.0: irq 93 for MSI/MSI-X
tg3 0000:08:00.0: irq 94 for MSI/MSI-X
tg3 0000:08:00.0: irq 95 for MSI/MSI-X
tg3 0000:08:00.0: irq 96 for MSI/MSI-X
tg3 0000:08:00.0: irq 97 for MSI/MSI-X
Installing knfsd (copyright (C) 1996 [email protected]).
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vesafb: mode is 1920x1200x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90017c00000, using 9024k, total 9024k
Console: switching to colour frame buffer device 240x75
fb0: VESA VGA frame buffer device
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
init: avahi-cups-reload main process (1529) terminated with status 1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ppdev: user-space parallel port driver
type=1400 audit(1380236130.714:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1551 comm="apparmor_parser"
tg3 0000:08:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:08:00.0 eth0: Flow control is on for TX and on for RX
tg3 0000:08:00.0 eth0: EEE is enabled
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: failsafe main process (1371) killed by TERM signal
tg3 0000:0e:00.0: irq 98 for MSI/MSI-X
tg3 0000:0e:00.0: irq 99 for MSI/MSI-X
tg3 0000:0e:00.0: irq 100 for MSI/MSI-X
tg3 0000:0e:00.0: irq 101 for MSI/MSI-X
tg3 0000:0e:00.0: irq 102 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): p2p1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): p2p1: link is not ready
audit_printk_skb: 3 callbacks suppressed
type=1400 audit(1380236166.354:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=2016 comm="apparmor_parser"
type=1400 audit(1380236166.354:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2016 comm="apparmor_parser"
type=1400 audit(1380236166.354:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=2016 comm="apparmor_parser"
type=1400 audit(1380236166.354:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=2020 comm="apparmor_parser"
type=1400 audit(1380236166.354:17): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2020 comm="apparmor_parser"
type=1400 audit(1380236166.442:18): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=2022 comm="apparmor_parser"
type=1400 audit(1380236166.442:19): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=2019 comm="apparmor_parser"
type=1400 audit(1380236166.446:20): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=2019 comm="apparmor_parser"
type=1400 audit(1380236166.446:21): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=2019 comm="apparmor_parser"
type=1400 audit(1380236166.446:22): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=2019 comm="apparmor_parser"
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81cbb180)
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x246 offMax=0x127e
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.18 (interface 0x001a0005).
vboxpci: IOMMU not found (not registered)
fglrx_pci 0000:05:00.0: irq 103 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 2526
[fglrx] Firegl kernel thread PID: 2527
[fglrx] Firegl kernel thread PID: 2528
[fglrx] IRQ 103 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f878000, size:4000
[fglrx] Reserved FB block: Unshared offset:f87c000, size:484000
[fglrx] Reserved FB block: Unshared offset:fff8000, size:8000
[fglrx] Reserved FB block: Unshared offset:bfff4000, size:c000
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.