dmesg - ng_aio
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-29-generic (buildd@panlong) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #42~precise1-Ubuntu SMP Wed Aug 14 16:19:23 UTC 2013 (Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.8.0-29-generic root=/dev/mapper/nginx--vg-root ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffbffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000ffc0000-0x000000000ffcfbff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000000ffcfc00-0x000000000fffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed13000-0x00000000fed9ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Dell Computer Corporation PowerEdge 860/0XM089, BIOS A04 07/24/2007
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0xffc0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 4096M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 2, base: 4GB, range: 512MB, type WB
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x0ffbffff]
[ 0.000000] [mem 0x00000000-0x0fdfffff] page 2M
[ 0.000000] [mem 0x0fe00000-0x0ffbffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xffbffff @ [mem 0x0ffbd000-0x0ffbffff]
[ 0.000000] RAMDISK: [mem 0x0e39d000-0x0f39afff]
[ 0.000000] ACPI: RSDP 00000000000fa030 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000fa0a0 0004C (v01 DELL PE_SC3 00000001 MSFT 0100000A)
[ 0.000000] ACPI: FACP 00000000000fa188 000F4 (v03 DELL PE_SC3 00000001 MSFT 0100000A)
[ 0.000000] ACPI: DSDT 000000000ffc0000 01C33 (v01 DELL PE_SC3 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 000000000ffcfc00 00040
[ 0.000000] ACPI: APIC 00000000000fa27c 00078 (v01 DELL PE_SC3 00000001 MSFT 0100000A)
[ 0.000000] ACPI: SPCR 00000000000fa300 00050 (v01 DELL PE_SC3 00000001 MSFT 0100000A)
[ 0.000000] ACPI: HPET 00000000000fa350 00038 (v01 DELL PE_SC3 00000001 MSFT 0100000A)
[ 0.000000] ACPI: MCFG 00000000000fa388 0003C (v01 DELL PE_SC3 00000001 MSFT 0100000A)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000000ffbffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x0ffbffff]
[ 0.000000] NODE_DATA [mem 0x0ffb8000-0x0ffbcfff]
[ 0.000000] [ffffea0000000000-ffffea00003fffff] PMD -> [ffff88000de00000-ffff88000e1fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x0ffbffff]
[ 0.000000] On node 0 totalpages: 65360
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 7 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 959 pages used for memmap
[ 0.000000] DMA32 zone: 60417 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] e820: [mem 0x0ffff000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88000fc00000 s85056 r8192 d21440 u524288
[ 0.000000] pcpu-alloc: s85056 r8192 d21440 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 64330
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.8.0-29-generic root=/dev/mapper/nginx--vg-root ro
[ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 224712k/261888k available (7170k kernel code, 448k absent, 36728k reserved, 6073k data, 1012k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 1048576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2133.396 MHz processor
[ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.79 BogoMIPS (lpj=8533584)
[ 0.008011] pid_max: default: 32768 minimum: 301
[ 0.008041] Security Framework initialized
[ 0.008061] AppArmor: AppArmor initialized
[ 0.008064] Yama: becoming mindful.
[ 0.008139] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008298] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.008375] Mount-cache hash table entries: 256
[ 0.008612] Initializing cgroup subsys cpuacct
[ 0.008617] Initializing cgroup subsys memory
[ 0.008629] Initializing cgroup subsys devices
[ 0.008633] Initializing cgroup subsys freezer
[ 0.008636] Initializing cgroup subsys blkio
[ 0.008640] Initializing cgroup subsys perf_event
[ 0.008645] Initializing cgroup subsys hugetlb
[ 0.008678] CPU: Physical Processor ID: 0
[ 0.008681] CPU: Processor Core ID: 0
[ 0.008685] mce: CPU supports 6 MCE banks
[ 0.008695] CPU0: Thermal monitoring enabled (TM1)
[ 0.008700] process: using mwait in idle threads
[ 0.008707] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.008707] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.008707] tlb_flushall_shift: -1
[ 0.008836] Freeing SMP alternatives: 24k freed
[ 0.011641] ACPI: Core revision 20121018
[ 0.012673] ftrace: allocating 29358 entries in 115 pages
[ 0.024468] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064980] smpboot: CPU0: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz (fam: 06, model: 0f, stepping: 0b)
[ 0.068000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.068000] perf_event_intel: PEBS disabled due to CPU errata
[ 0.068000] ... version: 2
[ 0.068000] ... bit width: 40
[ 0.068000] ... generic registers: 2
[ 0.068000] ... value mask: 000000ffffffffff
[ 0.068000] ... max period: 000000007fffffff
[ 0.068000] ... fixed-purpose events: 3
[ 0.068000] ... event mask: 0000000700000003
[ 0.078440] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.068000] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.104010] Brought up 4 CPUs
[ 0.104016] smpboot: Total of 4 processors activated (17067.16 BogoMIPS)
[ 0.108150] devtmpfs: initialized
[ 0.109719] EVM: security.selinux
[ 0.109722] EVM: security.SMACK64
[ 0.109725] EVM: security.capability
[ 0.109740] regulator-dummy: no parameters
[ 0.109740] NET: Registered protocol family 16
[ 0.112110] ACPI: bus type pci registered
[ 0.112175] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.112181] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.115420] PCI: Using configuration type 1 for base access
[ 0.116427] bio: create slab at 0
[ 0.116427] ACPI: Added _OSI(Module Device)
[ 0.116427] ACPI: Added _OSI(Processor Device)
[ 0.116427] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.116427] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.116481] ACPI: EC: Look up EC in DSDT
[ 0.117810] ACPI: Interpreter enabled
[ 0.117816] ACPI: (supports S0 S4 S5)
[ 0.117832] ACPI: Using IOAPIC for interrupt routing
[ 0.121022] ACPI: No dock devices found.
[ 0.121029] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.121538] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.121543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.122633] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.122637] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.122639] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.122642] pci_root PNP0A03:00: host bridge window [mem 0x10000000-0xfebfffff] (ignored)
[ 0.122645] PCI: root bus 00: using default resources
[ 0.122648] pci_root PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.122684] PCI host bridge to bus 0000:00
[ 0.122690] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.122694] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.122698] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.122711] pci 0000:00:00.0: [8086:2778] type 00 class 0x060000
[ 0.122756] pci 0000:00:01.0: [8086:2779] type 01 class 0x060400
[ 0.122798] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.122843] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.122911] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.122937] pci 0000:00:1c.4: [8086:27e0] type 01 class 0x060400
[ 0.123005] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.123028] pci 0000:00:1c.5: [8086:27e2] type 01 class 0x060400
[ 0.123095] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.123117] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.123157] pci 0000:00:1d.0: reg 20: [io 0xbce0-0xbcff]
[ 0.123188] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.123227] pci 0000:00:1d.1: reg 20: [io 0xbcc0-0xbcdf]
[ 0.123258] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.123298] pci 0000:00:1d.2: reg 20: [io 0xbca0-0xbcbf]
[ 0.123338] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.123357] pci 0000:00:1d.7: reg 10: [mem 0xfeb00400-0xfeb007ff]
[ 0.123438] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.123457] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.123521] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.123601] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 0.123608] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 0.123614] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e8 (mask 0003)
[ 0.123658] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.123670] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.123680] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.123689] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.123699] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.123708] pci 0000:00:1f.1: reg 20: [io 0xfc00-0xfc0f]
[ 0.123744] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.123757] pci 0000:00:1f.2: reg 10: [io 0xbc98-0xbc9f]
[ 0.123766] pci 0000:00:1f.2: reg 14: [io 0xbc90-0xbc93]
[ 0.123774] pci 0000:00:1f.2: reg 18: [io 0xbc80-0xbc87]
[ 0.123782] pci 0000:00:1f.2: reg 1c: [io 0xbc78-0xbc7b]
[ 0.123791] pci 0000:00:1f.2: reg 20: [io 0xbc60-0xbc6f]
[ 0.123799] pci 0000:00:1f.2: reg 24: [mem 0xfeb00000-0xfeb003ff]
[ 0.123839] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.123854] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.123904] pci 0000:00:1f.3: reg 20: [io 0x08c0-0x08df]
[ 0.123964] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.124020] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.124089] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[ 0.124113] pci 0000:03:00.0: reg 10: [mem 0xfe9f0000-0xfe9fffff 64bit]
[ 0.124232] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.124251] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.124265] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.124270] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.124275] pci 0000:00:1c.4: bridge window [mem 0xfe900000-0xfeafffff]
[ 0.124338] pci 0000:04:00.0: [14e4:1659] type 00 class 0x020000
[ 0.124361] pci 0000:04:00.0: reg 10: [mem 0xfe7f0000-0xfe7fffff 64bit]
[ 0.124481] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.124500] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.124513] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.124518] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.124522] pci 0000:00:1c.5: bridge window [mem 0xfe700000-0xfe8fffff]
[ 0.124563] pci 0000:05:05.0: [1002:515e] type 00 class 0x030000
[ 0.124581] pci 0000:05:05.0: reg 10: [mem 0xe8000000-0xefffffff pref]
[ 0.124592] pci 0000:05:05.0: reg 14: [io 0xcc00-0xccff]
[ 0.124602] pci 0000:05:05.0: reg 18: [mem 0xfe5f0000-0xfe5fffff]
[ 0.124636] pci 0000:05:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.124666] pci 0000:05:05.0: supports D1 D2
[ 0.124704] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.124711] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.124715] pci 0000:00:1e.0: bridge window [mem 0xfe500000-0xfe6fffff]
[ 0.124721] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.124724] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.124726] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.124757] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PES1._PRT]
[ 0.124810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP0._PRT]
[ 0.124862] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP1._PRT]
[ 0.124908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP2._PRT]
[ 0.124955] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT]
[ 0.125005] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.125011] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.125658] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12)
[ 0.125719] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12)
[ 0.125774] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[ 0.125831] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12)
[ 0.125885] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12)
[ 0.125940] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12)
[ 0.125994] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 9 10 11 12)
[ 0.126048] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[ 0.126143] vgaarb: device added: PCI:0000:05:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.126143] vgaarb: loaded
[ 0.126143] vgaarb: bridge control possible 0000:05:05.0
[ 0.126143] SCSI subsystem initialized
[ 0.126143] ACPI: bus type scsi registered
[ 0.126143] libata version 3.00 loaded.
[ 0.126143] ACPI: bus type usb registered
[ 0.126143] usbcore: registered new interface driver usbfs
[ 0.126143] usbcore: registered new interface driver hub
[ 0.126143] usbcore: registered new device driver usb
[ 0.126143] PCI: Using ACPI for IRQ routing
[ 0.128089] PCI: pci_cache_line_size set to 64 bytes
[ 0.128142] e820: reserve RAM buffer [mem 0x0ffc0000-0x0fffffff]
[ 0.128241] NetLabel: Initializing
[ 0.128245] NetLabel: domain hash size = 128
[ 0.128247] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.128261] NetLabel: unlabeled traffic allowed by default
[ 0.128280] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.128280] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.128280] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.130073] Switching to clocksource hpet
[ 0.135159] AppArmor: AppArmor Filesystem Enabled
[ 0.135203] pnp: PnP ACPI init
[ 0.135222] ACPI: bus type pnp registered
[ 0.135282] pnp 00:00: [dma 4]
[ 0.135307] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.135357] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.135393] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.135432] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.135541] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (disabled)
[ 0.136564] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.137458] system 00:06: [io 0x0800-0x087f] has been reserved
[ 0.137464] system 00:06: [io 0x0880-0x08bf] has been reserved
[ 0.137469] system 00:06: [io 0x08c0-0x08df] has been reserved
[ 0.137473] system 00:06: [io 0x08e0-0x08e3] has been reserved
[ 0.137477] system 00:06: [io 0x0c00-0x0c0f] has been reserved
[ 0.137481] system 00:06: [io 0x0c10-0x0c1f] has been reserved
[ 0.137486] system 00:06: [io 0x0ca0-0x0ca7] has been reserved
[ 0.137490] system 00:06: [io 0x0ca9-0x0cab] has been reserved
[ 0.137494] system 00:06: [io 0x0cad-0x0caf] has been reserved
[ 0.137498] system 00:06: [io 0x0c20-0x0c3f] has been reserved
[ 0.137504] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.137562] pnp 00:07: Plug and Play ACPI device, IDs IPI0001 (active)
[ 0.137609] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.137616] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.137647] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.137790] pnp: PnP ACPI: found 10 devices
[ 0.137794] ACPI: ACPI bus type pnp unregistered
[ 0.145517] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.145521] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.145530] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.145539] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.145547] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.145560] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.145563] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.145566] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.145569] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.145571] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.145577] pci 0000:00:1c.0: BAR 14: assigned [mem 0x10000000-0x101fffff]
[ 0.145583] pci 0000:00:1c.0: BAR 15: assigned [mem 0x10200000-0x103fffff 64bit pref]
[ 0.145589] pci 0000:00:1c.4: BAR 15: assigned [mem 0x10400000-0x105fffff 64bit pref]
[ 0.145595] pci 0000:00:1c.5: BAR 15: assigned [mem 0x10600000-0x107fffff 64bit pref]
[ 0.145600] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.145606] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.145615] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.145620] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.145627] pci 0000:00:1c.0: bridge window [mem 0x10000000-0x101fffff]
[ 0.145633] pci 0000:00:1c.0: bridge window [mem 0x10200000-0x103fffff 64bit pref]
[ 0.145641] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.145646] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.145652] pci 0000:00:1c.4: bridge window [mem 0xfe900000-0xfeafffff]
[ 0.145658] pci 0000:00:1c.4: bridge window [mem 0x10400000-0x105fffff 64bit pref]
[ 0.145667] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.145671] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.145678] pci 0000:00:1c.5: bridge window [mem 0xfe700000-0xfe8fffff]
[ 0.145684] pci 0000:00:1c.5: bridge window [mem 0x10600000-0x107fffff 64bit pref]
[ 0.145694] pci 0000:05:05.0: BAR 6: assigned [mem 0xfe500000-0xfe51ffff pref]
[ 0.145699] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.145704] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.145710] pci 0000:00:1e.0: bridge window [mem 0xfe500000-0xfe6fffff]
[ 0.145716] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.145762] pci 0000:00:1e.0: setting latency timer to 64
[ 0.145767] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.145769] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.145772] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.145775] pci_bus 0000:02: resource 1 [mem 0x10000000-0x101fffff]
[ 0.145777] pci_bus 0000:02: resource 2 [mem 0x10200000-0x103fffff 64bit pref]
[ 0.145780] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.145783] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfeafffff]
[ 0.145785] pci_bus 0000:03: resource 2 [mem 0x10400000-0x105fffff 64bit pref]
[ 0.145788] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.145790] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe8fffff]
[ 0.145793] pci_bus 0000:04: resource 2 [mem 0x10600000-0x107fffff 64bit pref]
[ 0.145796] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 0.145798] pci_bus 0000:05: resource 1 [mem 0xfe500000-0xfe6fffff]
[ 0.145801] pci_bus 0000:05: resource 2 [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.145803] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 0.145806] pci_bus 0000:05: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.145849] NET: Registered protocol family 2
[ 0.146007] TCP established hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.146032] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.146051] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.146079] TCP: reno registered
[ 0.146085] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.146094] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.146154] NET: Registered protocol family 1
[ 0.146274] pci 0000:05:05.0: Boot video device
[ 0.146278] PCI: CLS 64 bytes, default 64
[ 0.146327] Trying to unpack rootfs image as initramfs...
[ 0.473631] Freeing initrd memory: 16376k freed
[ 0.481354] Initialise module verification
[ 0.481422] audit: initializing netlink socket (disabled)
[ 0.481448] type=2000 audit(1380073242.480:1): initialized
[ 0.512911] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.514588] VFS: Disk quotas dquot_6.5.2
[ 0.514638] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.515225] fuse init (API version 7.20)
[ 0.515346] msgmni has been set to 470
[ 0.516082] Key type asymmetric registered
[ 0.516088] Asymmetric key parser 'x509' registered
[ 0.516159] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.516217] io scheduler noop registered
[ 0.516222] io scheduler deadline registered (default)
[ 0.516232] io scheduler cfq registered
[ 0.516371] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.516447] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.516536] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.516620] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.516693] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.516711] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.516763] intel_idle: does not run on family 6 model 15
[ 0.516835] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.516843] ACPI: Power Button [PWRF]
[ 0.520554] GHES: HEST is not enabled!
[ 0.520799] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 0.522832] Linux agpgart interface v0.103
[ 0.524672] brd: module loaded
[ 0.525699] loop: module loaded
[ 0.525810] ata_piix 0000:00:1f.1: version 2.13
[ 0.525819] ata_piix 0000:00:1f.1: enabling device (0000 -> 0001)
[ 0.525827] ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
[ 0.525863] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.526121] scsi0 : ata_piix
[ 0.526219] scsi1 : ata_piix
[ 0.526267] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 0.526272] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 0.526294] ata_piix 0000:00:1f.2: MAP [
[ 0.526297] P0 P2 P1 P3 ]
[ 0.526336] ata1: port disabled--ignoring
[ 0.526371] ata2: port disabled--ignoring
[ 0.680030] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.680322] scsi2 : ata_piix
[ 0.680404] scsi3 : ata_piix
[ 0.680445] ata3: SATA max UDMA/133 cmd 0xbc98 ctl 0xbc90 bmdma 0xbc60 irq 20
[ 0.680450] ata4: SATA max UDMA/133 cmd 0xbc80 ctl 0xbc78 bmdma 0xbc68 irq 20
[ 0.680731] libphy: Fixed MDIO Bus: probed
[ 0.680807] tun: Universal TUN/TAP device driver, 1.6
[ 0.680811] tun: (C) 1999-2004 Max Krasnyansky
[ 0.680877] PPP generic driver version 2.4.2
[ 0.680944] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.680948] ehci-pci: EHCI PCI platform driver
[ 0.680972] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 0.680976] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.680985] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.681001] ehci-pci 0000:00:1d.7: debug port 1
[ 0.684889] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.684895] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfeb00400
[ 0.696024] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.696055] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.696062] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.696068] usb usb1: Product: EHCI Host Controller
[ 0.696073] usb usb1: Manufacturer: Linux 3.8.0-29-generic ehci_hcd
[ 0.696079] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.696215] hub 1-0:1.0: USB hub found
[ 0.696222] hub 1-0:1.0: 6 ports detected
[ 0.696339] ehci-platform: EHCI generic platform driver
[ 0.696349] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.696368] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.696389] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.696393] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.696400] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.696427] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bce0
[ 0.696461] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.696466] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.696471] usb usb2: Product: UHCI Host Controller
[ 0.696475] usb usb2: Manufacturer: Linux 3.8.0-29-generic uhci_hcd
[ 0.696479] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.696602] hub 2-0:1.0: USB hub found
[ 0.696609] hub 2-0:1.0: 2 ports detected
[ 0.696687] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.696691] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.696698] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.696731] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bcc0
[ 0.696765] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.696770] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.696774] usb usb3: Product: UHCI Host Controller
[ 0.696778] usb usb3: Manufacturer: Linux 3.8.0-29-generic uhci_hcd
[ 0.696783] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.696901] hub 3-0:1.0: USB hub found
[ 0.696907] hub 3-0:1.0: 2 ports detected
[ 0.696977] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.696981] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.696988] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.697021] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bca0
[ 0.697055] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.697060] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.697065] usb usb4: Product: UHCI Host Controller
[ 0.697069] usb usb4: Manufacturer: Linux 3.8.0-29-generic uhci_hcd
[ 0.697073] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.697196] hub 4-0:1.0: USB hub found
[ 0.697202] hub 4-0:1.0: 2 ports detected
[ 0.697319] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.700112] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.700122] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.700280] mousedev: PS/2 mouse device common for all mice
[ 0.700423] rtc_cmos 00:03: RTC can wake from S4
[ 0.700564] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.700597] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.700691] device-mapper: uevent: version 1.0.3
[ 0.700781] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 0.700794] cpuidle: using governor ladder
[ 0.700803] cpuidle: using governor menu
[ 0.700809] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.700812] EFI Variables Facility v0.08 2004-May-17
[ 0.701053] ashmem: initialized
[ 0.701195] TCP: cubic registered
[ 0.701305] NET: Registered protocol family 10
[ 0.701491] NET: Registered protocol family 17
[ 0.701509] Key type dns_resolver registered
[ 0.701809] Loading module verification certificates
[ 0.702986] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 38550890b1fce75cc801d8fb942703db919b9386'
[ 0.703002] registered taskstats version 1
[ 0.705065] Key type trusted registered
[ 0.706881] Key type encrypted registered
[ 0.709056] rtc_cmos 00:03: setting system clock to 2013-09-25 01:40:42 UTC (1380073242)
[ 0.709133] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.709137] EDD information not available.
[ 0.879631] ata3.00: ATA-8: ST3250310NS, SN06, max UDMA/133
[ 0.879639] ata3.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 0.935622] ata3.00: configured for UDMA/133
[ 0.935791] scsi 2:0:0:0: Direct-Access ATA ST3250310NS SN06 PQ: 0 ANSI: 5
[ 0.935967] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 0.935971] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 0.936070] sd 2:0:0:0: [sda] Write Protect is off
[ 0.936078] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.936112] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.960595] sda: sda1 sda2 < sda5 >
[ 0.960995] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.962867] Freeing unused kernel memory: 1012k freed
[ 0.963107] Write protecting the kernel read-only data: 12288k
[ 0.966712] Freeing unused kernel memory: 1012k freed
[ 0.970429] Freeing unused kernel memory: 1008k freed
[ 0.988580] udevd[111]: starting version 175
[ 1.008043] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.022156] Disabling lock debugging due to kernel taint
[ 1.022435] pps_core: LinuxPPS API ver. 1 registered
[ 1.022440] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 1.022684] PTP clock support registered
[ 1.023703] tg3.c:v3.128 (December 03, 2012)
[ 1.034308] Floppy drive(s): fd0 is 1.44M
[ 1.037643] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:19:b9:f8:5f:59
[ 1.037655] tg3 0000:03:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 1.037662] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ 1.037667] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.049697] tg3 0000:04:00.0 eth1: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:19:b9:f8:5f:5a
[ 1.049708] tg3 0000:04:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 1.049714] tg3 0000:04:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ 1.049719] tg3 0000:04:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.140325] usb 1-3: New USB device found, idVendor=04b4, idProduct=6560
[ 1.140336] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.140608] hub 1-3:1.0: USB hub found
[ 1.140695] hub 1-3:1.0: 4 ports detected
[ 1.249135] bio: create slab at 1
[ 1.412166] usb 1-3.1: new full-speed USB device number 3 using ehci-pci
[ 1.480042] tsc: Refined TSC clocksource calibration: 2133.408 MHz
[ 1.480051] Switching to clocksource tsc
[ 1.489525] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 1.507449] usb 1-3.1: New USB device found, idVendor=046d, idProduct=c52b
[ 1.507460] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.507465] usb 1-3.1: Product: USB Receiver
[ 1.507469] usb 1-3.1: Manufacturer: Logitech
[ 4.056042] floppy0: no floppy controllers found
[ 5.122618] init: ureadahead main process (267) terminated with status 5
[ 5.664031] Adding 520188k swap on /dev/mapper/nginx--vg-swap_1. Priority:-1 extents:1 across:520188k
[ 6.059009] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.059017] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 6.137245] udevd[346]: starting version 175
[ 6.606476] lp: driver loaded but no devices found
[ 6.809751] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 6.955211] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.958955] intel_rng: FWH not detected
[ 6.964848] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb3
[ 6.985878] Floppy drive(s): fd0 is 1.44M
[ 7.014433] ACPI Warning: 0x00000000000008b0-0x00000000000008bf SystemIO conflicts with Region \_SB_.PCI0.ISA_.GIO4 1 (20121018/utaddress-251)
[ 7.014441] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.014443] ACPI Warning: 0x0000000000000880-0x00000000000008af SystemIO conflicts with Region \_SB_.PCI0.ISA_.GIO3 1 (20121018/utaddress-251)
[ 7.014448] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.014450] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.054060] EDAC MC: Ver: 3.0.0
[ 7.067570] EDAC MC0: Giving out device to 'i3000_edac' 'i3000': DEV 0000:00:00.0
[ 7.067586] EDAC PCI0: Giving out device to module 'i3000_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 7.163799] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb3
[ 7.165754] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb3
[ 7.167157] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb3
[ 7.168760] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 7.217996] leds_ss4200: no LED devices found
[ 7.397992] [drm] Initialized drm 1.1.0 20060810
[ 7.399762] usbcore: registered new interface driver usbhid
[ 7.399767] usbhid: USB HID core driver
[ 7.510244] kvm: disabled by bios
[ 7.513410] kvm: disabled by bios
[ 7.532502] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.7-3.1/input2
[ 7.535850] input: Logitech Unifying Device. Wireless PID:400e as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.1/1-3.1:1.2/0003:046D:C52B.0003/input/input1
[ 7.536027] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on usb-0000:00:1d.7-3.1:1
[ 7.756690] coretemp coretemp.0: Using relative temperature scale!
[ 7.756704] coretemp coretemp.0: Using relative temperature scale!
[ 7.756719] coretemp coretemp.0: Using relative temperature scale!
[ 7.756733] coretemp coretemp.0: Using relative temperature scale!
[ 7.869367] [drm] radeon defaulting to kernel modesetting.
[ 7.869371] [drm] radeon kernel modesetting enabled.
[ 7.869647] [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x1028:0x01E6).
[ 7.869666] [drm] register mmio base: 0xFE5F0000
[ 7.869668] [drm] register mmio size: 65536
[ 7.869764] radeon 0000:05:05.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (16M used)
[ 7.869767] radeon 0000:05:05.0: GTT: 512M 0x00000000C8000000 - 0x00000000E7FFFFFF
[ 7.869777] mtrr: type mismatch for e8000000,8000000 old: write-back new: write-combining
[ 7.869779] [drm] Detected VRAM RAM=128M, BAR=128M
[ 7.869781] [drm] RAM width 16bits DDR
[ 7.869853] [TTM] Zone kernel: Available graphics memory: 122072 kiB
[ 7.869855] [TTM] Initializing pool allocator
[ 7.869861] [TTM] Initializing DMA pool allocator
[ 7.869894] [drm] radeon: 16M of VRAM memory ready
[ 7.869897] [drm] radeon: 512M of GTT memory ready.
[ 7.869912] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 7.891271] [drm] PCI GART of 512M enabled (table at 0x000000000AF80000).
[ 7.891301] radeon 0000:05:05.0: WB disabled
[ 7.891305] radeon 0000:05:05.0: fence driver on ring 0 use gpu addr 0x00000000c8000000 and cpu addr 0xffff88000af0d000
[ 7.891309] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.891310] [drm] Driver supports precise vblank timestamp query.
[ 7.891335] [drm] radeon: irq initialized.
[ 7.891417] [drm] Loading R100 Microcode
[ 8.060693] [drm] radeon: ring at 0x00000000C8001000
[ 8.060722] [drm] ring test succeeded in 1 usecs
[ 8.060871] [drm] ib test succeeded in 0 usecs
[ 8.061113] [drm] Radeon Display Connectors
[ 8.061116] [drm] Connector 0:
[ 8.061117] [drm] VGA-1
[ 8.061120] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 8.061121] [drm] Encoders:
[ 8.061123] [drm] CRT1: INTERNAL_DAC1
[ 8.104149] [drm] fb mappable at 0xE8040000
[ 8.104152] [drm] vram apper at 0xE8000000
[ 8.104153] [drm] size 786432
[ 8.104155] [drm] fb depth is 8
[ 8.104156] [drm] pitch is 1024
[ 8.104314] fbcon: radeondrmfb (fb0) is primary device
[ 8.253788] Console: switching to colour frame buffer device 128x48
[ 8.261571] radeon 0000:05:05.0: fb0: radeondrmfb frame buffer device
[ 8.261572] radeon 0000:05:05.0: registered panic notifier
[ 8.261580] [drm] Initialized radeon 2.29.0 20080528 for 0000:05:05.0 on minor 0
[ 8.401785] type=1400 audit(1380073250.190:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=515 comm="apparmor_parser"
[ 8.401796] type=1400 audit(1380073250.190:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=517 comm="apparmor_parser"
[ 8.402187] type=1400 audit(1380073250.190:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=515 comm="apparmor_parser"
[ 8.402244] type=1400 audit(1380073250.190:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=517 comm="apparmor_parser"
[ 8.402413] type=1400 audit(1380073250.190:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=515 comm="apparmor_parser"
[ 8.402473] type=1400 audit(1380073250.190:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=517 comm="apparmor_parser"
[ 8.402965] type=1400 audit(1380073250.190:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=516 comm="apparmor_parser"
[ 8.403365] type=1400 audit(1380073250.190:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=516 comm="apparmor_parser"
[ 8.403593] type=1400 audit(1380073250.190:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=516 comm="apparmor_parser"
[ 9.699425] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 10.008046] floppy0: no floppy controllers found
[ 11.283732] tg3 0000:04:00.0 eth1: Link is up at 100 Mbps, full duplex
[ 11.283736] tg3 0000:04:00.0 eth1: Flow control is on for TX and on for RX
[ 11.283750] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 16.482697] init: failsafe main process (596) killed by TERM signal
[ 16.675587] type=1400 audit(1380073258.462:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=890 comm="apparmor_parser"
[ 16.675990] type=1400 audit(1380073258.462:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=890 comm="apparmor_parser"
[ 16.676247] type=1400 audit(1380073258.466:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=890 comm="apparmor_parser"
[ 16.706714] type=1400 audit(1380073258.494:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=892 comm="apparmor_parser"
[ 1115.700201] tg3 0000:04:00.0 eth1: Link is down
[ 1165.305243] tg3 0000:04:00.0 eth1: Link is up at 100 Mbps, half duplex
[ 1165.305248] tg3 0000:04:00.0 eth1: Flow control is on for TX and on for RX
[ 1343.323734] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1d.7-3.1/input2, status -71
[ 1343.324085] usb 1-3: clear tt 1 (0030) error -32
[ 1343.331726] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1d.7-3.1/input2, status -71
[ 1343.332060] usb 1-3: clear tt 1 (0030) error -32
[ 1343.339717] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1d.7-3.1/input2, status -71
[ 1343.339920] usb 1-3: clear tt 1 (0030) error -32
[ 1343.347725] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1d.7-3.1/input2, status -71
[ 1343.348048] usb 1-3: clear tt 1 (0030) error -32
[ 1343.355725] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1d.7-3.1/input2, status -71
[ 1343.356055] usb 1-3: clear tt 1 (0030) error -32
[ 1343.363725] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1d.7-3.1/input2, status -71
[ 1343.364047] usb 1-3: clear tt 1 (0030) error -32
[ 1343.371725] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1d.7-3.1/input2, status -71
[ 1343.372047] usb 1-3: clear tt 1 (0030) error -32
[ 1343.379709] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1d.7-3.1/input2, status -71
[ 1343.379920] usb 1-3: clear tt 1 (0030) error -32
[ 1343.387724] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1d.7-3.1/input2, status -71
[ 1343.388047] usb 1-3: clear tt 1 (0030) error -32
[ 1343.395725] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1d.7-3.1/input2, status -71
[ 1343.396046] usb 1-3: clear tt 1 (0030) error -32
[ 1343.403725] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1d.7-3.1/input2, status -71
[ 1343.404046] usb 1-3: clear tt 1 (0030) error -32
[ 1343.407043] usb 1-3.1: USB disconnect, device number 3
[ 4460.227902] tg3 0000:04:00.0 eth1: Link is down
[ 4465.197072] tg3 0000:04:00.0 eth1: Link is up at 100 Mbps, half duplex
[ 4465.197075] tg3 0000:04:00.0 eth1: Flow control is on for TX and on for RX
[ 5477.292625] Bluetooth: Core ver 2.16
[ 5477.292651] NET: Registered protocol family 31
[ 5477.292653] Bluetooth: HCI device and connection manager initialized
[ 5477.292663] Bluetooth: HCI socket layer initialized
[ 5477.292666] Bluetooth: L2CAP socket layer initialized
[ 5477.292673] Bluetooth: SCO socket layer initialized
[ 5477.325660] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5477.325665] Bluetooth: BNEP filters: protocol multicast
[ 5477.325674] Bluetooth: BNEP socket layer initialized
[ 5477.342083] Bluetooth: RFCOMM TTY layer initialized
[ 5477.342098] Bluetooth: RFCOMM socket layer initialized
[ 5477.342100] Bluetooth: RFCOMM ver 1.11
[ 5772.143116] select 1 (init), adj 0, size 56, to kill
[ 5772.143129] select 2258 (sshd), adj 0, size 57, to kill
[ 5772.143132] select 2535 (php5), adj 0, size 230, to kill
[ 5772.143137] select 31702 (cc1plus), adj 0, size 5397, to kill
[ 5772.143140] select 31701 (cc1plus), adj 0, size 6582, to kill
[ 5772.143142] select 31704 (cc1plus), adj 0, size 6585, to kill
[ 5772.143144] select 31705 (cc1plus), adj 0, size 7127, to kill
[ 5772.143148] send sigkill to 31705 (cc1plus), adj 0, size 7127
[31555.225865] select 1 (init), adj 0, size 107, to kill
[31555.225875] select 31945 (update-apt-xapi), adj 0, size 46746, to kill
[31555.225877] send sigkill to 31945 (update-apt-xapi), adj 0, size 46746
[31676.371448] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[31676.532480] JFS: nTxBlock = 1907, nTxLock = 15259
[31676.763241] NTFS driver 2.1.30 [Flags: R/O MODULE].
[31676.926737] QNX4 filesystem 0.2.3 registered.
[31676.981748] Btrfs loaded