dmesg - ng_ai02
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-30-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #44~precise1-Ubuntu SMP Fri Aug 23 18:32:41 UTC 2013 (Ubuntu 3.8.0-30.44~precise1-generic 3.8.13.6)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.8.0-30-generic root=/dev/mapper/nginx--vg-root ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffbffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000ffc0000-0x000000000ffcfbff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000000ffcfc00-0x000000000fffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed13000-0x00000000fed9ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Dell Computer Corporation PowerEdge 860/0XM089, BIOS A04 07/24/2007
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0xffc0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 4096M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 2, base: 4GB, range: 512MB, type WB
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x0ffbffff]
[ 0.000000] [mem 0x00000000-0x0fdfffff] page 2M
[ 0.000000] [mem 0x0fe00000-0x0ffbffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xffbffff @ [mem 0x0ffbd000-0x0ffbffff]
[ 0.000000] RAMDISK: [mem 0x0e5da000-0x0f5d8fff]
[ 0.000000] ACPI: RSDP 00000000000fa030 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000fa0a0 0004C (v01 DELL PE_SC3 00000001 MSFT 0100000A)
[ 0.000000] ACPI: FACP 00000000000fa188 000F4 (v03 DELL PE_SC3 00000001 MSFT 0100000A)
[ 0.000000] ACPI: DSDT 000000000ffc0000 01C33 (v01 DELL PE_SC3 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 000000000ffcfc00 00040
[ 0.000000] ACPI: APIC 00000000000fa27c 00078 (v01 DELL PE_SC3 00000001 MSFT 0100000A)
[ 0.000000] ACPI: SPCR 00000000000fa300 00050 (v01 DELL PE_SC3 00000001 MSFT 0100000A)
[ 0.000000] ACPI: HPET 00000000000fa350 00038 (v01 DELL PE_SC3 00000001 MSFT 0100000A)
[ 0.000000] ACPI: MCFG 00000000000fa388 0003C (v01 DELL PE_SC3 00000001 MSFT 0100000A)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000000ffbffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x0ffbffff]
[ 0.000000] NODE_DATA [mem 0x0ffb8000-0x0ffbcfff]
[ 0.000000] [ffffea0000000000-ffffea00003fffff] PMD -> [ffff88000e000000-ffff88000e3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x0ffbffff]
[ 0.000000] On node 0 totalpages: 65360
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 7 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 959 pages used for memmap
[ 0.000000] DMA32 zone: 60417 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] e820: [mem 0x0ffff000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88000fc00000 s85056 r8192 d21440 u524288
[ 0.000000] pcpu-alloc: s85056 r8192 d21440 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 64330
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.8.0-30-generic root=/dev/mapper/nginx--vg-root ro
[ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 224708k/261888k available (7171k kernel code, 448k absent, 36732k reserved, 6072k data, 1012k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 1048576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2133.445 MHz processor
[ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.89 BogoMIPS (lpj=8533780)
[ 0.008012] pid_max: default: 32768 minimum: 301
[ 0.008042] Security Framework initialized
[ 0.008062] AppArmor: AppArmor initialized
[ 0.008065] Yama: becoming mindful.
[ 0.008140] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008298] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.008373] Mount-cache hash table entries: 256
[ 0.008609] Initializing cgroup subsys cpuacct
[ 0.008614] Initializing cgroup subsys memory
[ 0.008626] Initializing cgroup subsys devices
[ 0.008629] Initializing cgroup subsys freezer
[ 0.008633] Initializing cgroup subsys blkio
[ 0.008637] Initializing cgroup subsys perf_event
[ 0.008641] Initializing cgroup subsys hugetlb
[ 0.008675] CPU: Physical Processor ID: 0
[ 0.008678] CPU: Processor Core ID: 0
[ 0.008682] mce: CPU supports 6 MCE banks
[ 0.008692] CPU0: Thermal monitoring enabled (TM1)
[ 0.008698] process: using mwait in idle threads
[ 0.008705] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.008705] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.008705] tlb_flushall_shift: -1
[ 0.008833] Freeing SMP alternatives: 24k freed
[ 0.011638] ACPI: Core revision 20121018
[ 0.012667] ftrace: allocating 29362 entries in 115 pages
[ 0.020467] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060824] smpboot: CPU0: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz (fam: 06, model: 0f, stepping: 0b)
[ 0.064000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.064000] perf_event_intel: PEBS disabled due to CPU errata
[ 0.064000] ... version: 2
[ 0.064000] ... bit width: 40
[ 0.064000] ... generic registers: 2
[ 0.064000] ... value mask: 000000ffffffffff
[ 0.064000] ... max period: 000000007fffffff
[ 0.064000] ... fixed-purpose events: 3
[ 0.064000] ... event mask: 0000000700000003
[ 0.074428] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.064000] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.100010] Brought up 4 CPUs
[ 0.100016] smpboot: Total of 4 processors activated (17067.56 BogoMIPS)
[ 0.104152] devtmpfs: initialized
[ 0.105717] EVM: security.selinux
[ 0.105721] EVM: security.SMACK64
[ 0.105724] EVM: security.capability
[ 0.105739] regulator-dummy: no parameters
[ 0.105739] NET: Registered protocol family 16
[ 0.108131] ACPI: bus type pci registered
[ 0.108196] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.108203] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.111443] PCI: Using configuration type 1 for base access
[ 0.112459] bio: create slab at 0
[ 0.112459] ACPI: Added _OSI(Module Device)
[ 0.112459] ACPI: Added _OSI(Processor Device)
[ 0.112459] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.112459] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.112480] ACPI: EC: Look up EC in DSDT
[ 0.113808] ACPI: Interpreter enabled
[ 0.113815] ACPI: (supports S0 S4 S5)
[ 0.113831] ACPI: Using IOAPIC for interrupt routing
[ 0.117041] ACPI: No dock devices found.
[ 0.117049] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.117560] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.117566] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.118656] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.118660] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.118663] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.118665] pci_root PNP0A03:00: host bridge window [mem 0x10000000-0xfebfffff] (ignored)
[ 0.118668] PCI: root bus 00: using default resources
[ 0.118671] pci_root PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.118707] PCI host bridge to bus 0000:00
[ 0.118712] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.118716] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.118720] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.118733] pci 0000:00:00.0: [8086:2778] type 00 class 0x060000
[ 0.118779] pci 0000:00:01.0: [8086:2779] type 01 class 0x060400
[ 0.118821] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.118865] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.118934] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.118960] pci 0000:00:1c.4: [8086:27e0] type 01 class 0x060400
[ 0.119028] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.119051] pci 0000:00:1c.5: [8086:27e2] type 01 class 0x060400
[ 0.119119] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.119141] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.119180] pci 0000:00:1d.0: reg 20: [io 0xbce0-0xbcff]
[ 0.119212] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.119251] pci 0000:00:1d.1: reg 20: [io 0xbcc0-0xbcdf]
[ 0.119282] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.119321] pci 0000:00:1d.2: reg 20: [io 0xbca0-0xbcbf]
[ 0.119362] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.119381] pci 0000:00:1d.7: reg 10: [mem 0xfeb00400-0xfeb007ff]
[ 0.119461] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.119481] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.119545] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.119625] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 0.119632] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 0.119639] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e8 (mask 0003)
[ 0.119682] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.119695] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.119705] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.119714] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.119724] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.119733] pci 0000:00:1f.1: reg 20: [io 0xfc00-0xfc0f]
[ 0.119769] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.119782] pci 0000:00:1f.2: reg 10: [io 0xbc98-0xbc9f]
[ 0.119791] pci 0000:00:1f.2: reg 14: [io 0xbc90-0xbc93]
[ 0.119799] pci 0000:00:1f.2: reg 18: [io 0xbc80-0xbc87]
[ 0.119813] pci 0000:00:1f.2: reg 1c: [io 0xbc78-0xbc7b]
[ 0.119826] pci 0000:00:1f.2: reg 20: [io 0xbc60-0xbc6f]
[ 0.119834] pci 0000:00:1f.2: reg 24: [mem 0xfeb00000-0xfeb003ff]
[ 0.119864] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.119879] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.119928] pci 0000:00:1f.3: reg 20: [io 0x08c0-0x08df]
[ 0.119989] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.120043] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.120112] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[ 0.120135] pci 0000:03:00.0: reg 10: [mem 0xfe9f0000-0xfe9fffff 64bit]
[ 0.120255] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.120275] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.120288] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.120294] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.120298] pci 0000:00:1c.4: bridge window [mem 0xfe900000-0xfeafffff]
[ 0.120362] pci 0000:04:00.0: [14e4:1659] type 00 class 0x020000
[ 0.120385] pci 0000:04:00.0: reg 10: [mem 0xfe7f0000-0xfe7fffff 64bit]
[ 0.120505] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.120524] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.120537] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.120542] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.120547] pci 0000:00:1c.5: bridge window [mem 0xfe700000-0xfe8fffff]
[ 0.120588] pci 0000:05:05.0: [1002:515e] type 00 class 0x030000
[ 0.120606] pci 0000:05:05.0: reg 10: [mem 0xe8000000-0xefffffff pref]
[ 0.120616] pci 0000:05:05.0: reg 14: [io 0xcc00-0xccff]
[ 0.120627] pci 0000:05:05.0: reg 18: [mem 0xfe5f0000-0xfe5fffff]
[ 0.120661] pci 0000:05:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.120690] pci 0000:05:05.0: supports D1 D2
[ 0.120729] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.120736] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.120740] pci 0000:00:1e.0: bridge window [mem 0xfe500000-0xfe6fffff]
[ 0.120746] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.120749] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.120752] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.120782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PES1._PRT]
[ 0.120836] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP0._PRT]
[ 0.120887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP1._PRT]
[ 0.120934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP2._PRT]
[ 0.120980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT]
[ 0.121030] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.121036] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.121680] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12)
[ 0.121740] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12)
[ 0.121794] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[ 0.121849] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12)
[ 0.121903] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12)
[ 0.121956] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12)
[ 0.122009] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 9 10 11 12)
[ 0.122060] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[ 0.122155] vgaarb: device added: PCI:0000:05:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.122155] vgaarb: loaded
[ 0.122155] vgaarb: bridge control possible 0000:05:05.0
[ 0.122155] SCSI subsystem initialized
[ 0.122155] ACPI: bus type scsi registered
[ 0.122155] libata version 3.00 loaded.
[ 0.122155] ACPI: bus type usb registered
[ 0.122155] usbcore: registered new interface driver usbfs
[ 0.122155] usbcore: registered new interface driver hub
[ 0.122155] usbcore: registered new device driver usb
[ 0.122155] PCI: Using ACPI for IRQ routing
[ 0.124116] PCI: pci_cache_line_size set to 64 bytes
[ 0.124169] e820: reserve RAM buffer [mem 0x0ffc0000-0x0fffffff]
[ 0.124267] NetLabel: Initializing
[ 0.124271] NetLabel: domain hash size = 128
[ 0.124273] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.124287] NetLabel: unlabeled traffic allowed by default
[ 0.124306] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.124306] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.124306] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.126073] Switching to clocksource hpet
[ 0.131654] AppArmor: AppArmor Filesystem Enabled
[ 0.131698] pnp: PnP ACPI init
[ 0.131715] ACPI: bus type pnp registered
[ 0.131776] pnp 00:00: [dma 4]
[ 0.131801] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.131850] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.131886] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.131925] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.132059] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (disabled)
[ 0.133051] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.133945] system 00:06: [io 0x0800-0x087f] has been reserved
[ 0.133951] system 00:06: [io 0x0880-0x08bf] has been reserved
[ 0.133955] system 00:06: [io 0x08c0-0x08df] has been reserved
[ 0.133960] system 00:06: [io 0x08e0-0x08e3] has been reserved
[ 0.133964] system 00:06: [io 0x0c00-0x0c0f] has been reserved
[ 0.133969] system 00:06: [io 0x0c10-0x0c1f] has been reserved
[ 0.133973] system 00:06: [io 0x0ca0-0x0ca7] has been reserved
[ 0.133977] system 00:06: [io 0x0ca9-0x0cab] has been reserved
[ 0.133982] system 00:06: [io 0x0cad-0x0caf] has been reserved
[ 0.133986] system 00:06: [io 0x0c20-0x0c3f] has been reserved
[ 0.133992] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.134050] pnp 00:07: Plug and Play ACPI device, IDs IPI0001 (active)
[ 0.134097] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.134104] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134135] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.134276] pnp: PnP ACPI: found 10 devices
[ 0.134281] ACPI: ACPI bus type pnp unregistered
[ 0.142056] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.142060] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.142069] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.142078] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.142087] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.142099] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.142102] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.142105] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.142108] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.142111] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.142117] pci 0000:00:1c.0: BAR 14: assigned [mem 0x10000000-0x101fffff]
[ 0.142123] pci 0000:00:1c.0: BAR 15: assigned [mem 0x10200000-0x103fffff 64bit pref]
[ 0.142129] pci 0000:00:1c.4: BAR 15: assigned [mem 0x10400000-0x105fffff 64bit pref]
[ 0.142135] pci 0000:00:1c.5: BAR 15: assigned [mem 0x10600000-0x107fffff 64bit pref]
[ 0.142141] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.142146] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.142156] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.142160] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.142167] pci 0000:00:1c.0: bridge window [mem 0x10000000-0x101fffff]
[ 0.142173] pci 0000:00:1c.0: bridge window [mem 0x10200000-0x103fffff 64bit pref]
[ 0.142182] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.142187] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.142193] pci 0000:00:1c.4: bridge window [mem 0xfe900000-0xfeafffff]
[ 0.142199] pci 0000:00:1c.4: bridge window [mem 0x10400000-0x105fffff 64bit pref]
[ 0.142208] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.142212] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.142219] pci 0000:00:1c.5: bridge window [mem 0xfe700000-0xfe8fffff]
[ 0.142225] pci 0000:00:1c.5: bridge window [mem 0x10600000-0x107fffff 64bit pref]
[ 0.142235] pci 0000:05:05.0: BAR 6: assigned [mem 0xfe500000-0xfe51ffff pref]
[ 0.142240] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.142245] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.142252] pci 0000:00:1e.0: bridge window [mem 0xfe500000-0xfe6fffff]
[ 0.142258] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.142303] pci 0000:00:1e.0: setting latency timer to 64
[ 0.142307] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.142310] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.142313] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.142315] pci_bus 0000:02: resource 1 [mem 0x10000000-0x101fffff]
[ 0.142318] pci_bus 0000:02: resource 2 [mem 0x10200000-0x103fffff 64bit pref]
[ 0.142321] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.142323] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfeafffff]
[ 0.142326] pci_bus 0000:03: resource 2 [mem 0x10400000-0x105fffff 64bit pref]
[ 0.142328] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.142331] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe8fffff]
[ 0.142333] pci_bus 0000:04: resource 2 [mem 0x10600000-0x107fffff 64bit pref]
[ 0.142336] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 0.142338] pci_bus 0000:05: resource 1 [mem 0xfe500000-0xfe6fffff]
[ 0.142341] pci_bus 0000:05: resource 2 [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.142344] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 0.142346] pci_bus 0000:05: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.142390] NET: Registered protocol family 2
[ 0.142551] TCP established hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.142576] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.142594] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.142622] TCP: reno registered
[ 0.142628] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.142637] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.142696] NET: Registered protocol family 1
[ 0.142815] pci 0000:05:05.0: Boot video device
[ 0.142819] PCI: CLS 64 bytes, default 64
[ 0.142869] Trying to unpack rootfs image as initramfs...
[ 0.467874] Freeing initrd memory: 16380k freed
[ 0.475509] Initialise module verification
[ 0.475579] audit: initializing netlink socket (disabled)
[ 0.475604] type=2000 audit(1380115824.472:1): initialized
[ 0.507196] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.508878] VFS: Disk quotas dquot_6.5.2
[ 0.508927] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.509516] fuse init (API version 7.20)
[ 0.509637] msgmni has been set to 470
[ 0.510355] Key type asymmetric registered
[ 0.510362] Asymmetric key parser 'x509' registered
[ 0.510429] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.510484] io scheduler noop registered
[ 0.510490] io scheduler deadline registered (default)
[ 0.510499] io scheduler cfq registered
[ 0.510642] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.510718] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.510806] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.510890] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.510963] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.510981] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.511034] intel_idle: does not run on family 6 model 15
[ 0.511106] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.511115] ACPI: Power Button [PWRF]
[ 0.514815] GHES: HEST is not enabled!
[ 0.515062] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 0.517124] Linux agpgart interface v0.103
[ 0.518948] brd: module loaded
[ 0.519980] loop: module loaded
[ 0.520102] ata_piix 0000:00:1f.1: version 2.13
[ 0.520111] ata_piix 0000:00:1f.1: enabling device (0000 -> 0001)
[ 0.520119] ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
[ 0.520155] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.520406] scsi0 : ata_piix
[ 0.520510] scsi1 : ata_piix
[ 0.520559] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 0.520564] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 0.520586] ata_piix 0000:00:1f.2: MAP [
[ 0.520589] P0 P2 P1 P3 ]
[ 0.520616] ata1: port disabled--ignoring
[ 0.520683] ata2: port disabled--ignoring
[ 0.676043] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.676329] scsi2 : ata_piix
[ 0.676409] scsi3 : ata_piix
[ 0.676453] ata3: SATA max UDMA/133 cmd 0xbc98 ctl 0xbc90 bmdma 0xbc60 irq 20
[ 0.676457] ata4: SATA max UDMA/133 cmd 0xbc80 ctl 0xbc78 bmdma 0xbc68 irq 20
[ 0.676747] libphy: Fixed MDIO Bus: probed
[ 0.676825] tun: Universal TUN/TAP device driver, 1.6
[ 0.676828] tun: (C) 1999-2004 Max Krasnyansky
[ 0.676896] PPP generic driver version 2.4.2
[ 0.676960] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.676965] ehci-pci: EHCI PCI platform driver
[ 0.676990] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 0.676994] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.677003] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.677019] ehci-pci 0000:00:1d.7: debug port 1
[ 0.680924] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.680930] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfeb00400
[ 0.692024] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.692074] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.692081] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.692088] usb usb1: Product: EHCI Host Controller
[ 0.692093] usb usb1: Manufacturer: Linux 3.8.0-30-generic ehci_hcd
[ 0.692098] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.692232] hub 1-0:1.0: USB hub found
[ 0.692239] hub 1-0:1.0: 6 ports detected
[ 0.692353] ehci-platform: EHCI generic platform driver
[ 0.692366] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.692384] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.692403] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.692406] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.692416] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.692441] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bce0
[ 0.692475] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.692480] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.692485] usb usb2: Product: UHCI Host Controller
[ 0.692489] usb usb2: Manufacturer: Linux 3.8.0-30-generic uhci_hcd
[ 0.692493] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.692616] hub 2-0:1.0: USB hub found
[ 0.692623] hub 2-0:1.0: 2 ports detected
[ 0.692696] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.692700] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.692707] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.692740] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bcc0
[ 0.692776] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.692781] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.692786] usb usb3: Product: UHCI Host Controller
[ 0.692790] usb usb3: Manufacturer: Linux 3.8.0-30-generic uhci_hcd
[ 0.692794] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.692918] hub 3-0:1.0: USB hub found
[ 0.692924] hub 3-0:1.0: 2 ports detected
[ 0.692995] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.692998] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.693006] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.693038] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bca0
[ 0.693070] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.693075] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.693080] usb usb4: Product: UHCI Host Controller
[ 0.693084] usb usb4: Manufacturer: Linux 3.8.0-30-generic uhci_hcd
[ 0.693088] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.693209] hub 4-0:1.0: USB hub found
[ 0.693215] hub 4-0:1.0: 2 ports detected
[ 0.693337] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.696172] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.696181] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.696328] mousedev: PS/2 mouse device common for all mice
[ 0.696459] rtc_cmos 00:03: RTC can wake from S4
[ 0.696600] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.696630] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.696724] device-mapper: uevent: version 1.0.3
[ 0.696814] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: [email protected]
[ 0.696827] cpuidle: using governor ladder
[ 0.696836] cpuidle: using governor menu
[ 0.696841] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.696845] EFI Variables Facility v0.08 2004-May-17
[ 0.697069] ashmem: initialized
[ 0.697231] TCP: cubic registered
[ 0.697340] NET: Registered protocol family 10
[ 0.697527] NET: Registered protocol family 17
[ 0.697540] Key type dns_resolver registered
[ 0.697840] Loading module verification certificates
[ 0.699003] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 77a9dfa8afaf07bcb72c3612dcf5dc8c20f80413'
[ 0.699019] registered taskstats version 1
[ 0.701247] Key type trusted registered
[ 0.703162] Key type encrypted registered
[ 0.705609] rtc_cmos 00:03: setting system clock to 2013-09-25 13:30:25 UTC (1380115825)
[ 0.705688] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.705692] EDD information not available.
[ 0.875692] ata3.00: ATA-8: ST3250310NS, SN06, max UDMA/133
[ 0.875699] ata3.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 0.931722] ata3.00: configured for UDMA/133
[ 0.931860] scsi 2:0:0:0: Direct-Access ATA ST3250310NS SN06 PQ: 0 ANSI: 5
[ 0.932032] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 0.932037] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 0.932114] sd 2:0:0:0: [sda] Write Protect is off
[ 0.932125] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.932161] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.947822] sda: sda1 sda2 < sda5 >
[ 0.948178] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.950052] Freeing unused kernel memory: 1012k freed
[ 0.950343] Write protecting the kernel read-only data: 12288k
[ 0.953934] Freeing unused kernel memory: 1012k freed
[ 0.957666] Freeing unused kernel memory: 1008k freed
[ 0.975750] udevd[111]: starting version 175
[ 1.004046] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.008482] Disabling lock debugging due to kernel taint
[ 1.008727] pps_core: LinuxPPS API ver. 1 registered
[ 1.008732] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 1.008976] PTP clock support registered
[ 1.009906] tg3.c:v3.128 (December 03, 2012)
[ 1.021654] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:19:b9:f8:5f:59
[ 1.021665] tg3 0000:03:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 1.021671] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ 1.021676] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.024708] Floppy drive(s): fd0 is 1.44M
[ 1.033683] tg3 0000:04:00.0 eth1: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:19:b9:f8:5f:5a
[ 1.033695] tg3 0000:04:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 1.033701] tg3 0000:04:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ 1.033706] tg3 0000:04:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.136360] usb 1-3: New USB device found, idVendor=04b4, idProduct=6560
[ 1.136371] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.136641] hub 1-3:1.0: USB hub found
[ 1.136730] hub 1-3:1.0: 4 ports detected
[ 1.231857] bio: create slab at 1
[ 1.472028] tsc: Refined TSC clocksource calibration: 2133.408 MHz
[ 1.472040] Switching to clocksource tsc
[ 1.501317] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.048043] floppy0: no floppy controllers found
[ 5.118081] init: ureadahead main process (259) terminated with status 5
[ 5.667912] Adding 520188k swap on /dev/mapper/nginx--vg-swap_1. Priority:-1 extents:1 across:520188k
[ 6.079562] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.079570] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 6.174681] udevd[338]: starting version 175
[ 6.627168] lp: driver loaded but no devices found
[ 6.795834] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 7.056967] intel_rng: FWH not detected
[ 7.133407] EDAC MC: Ver: 3.0.0
[ 7.162029] EDAC MC0: Giving out device to 'i3000_edac' 'i3000': DEV 0000:00:00.0
[ 7.162046] EDAC PCI0: Giving out device to module 'i3000_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 7.172576] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 7.205485] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb3
[ 7.245771] Floppy drive(s): fd0 is 1.44M
[ 7.286093] ACPI Warning: 0x00000000000008b0-0x00000000000008bf SystemIO conflicts with Region \_SB_.PCI0.ISA_.GIO4 1 (20121018/utaddress-251)
[ 7.286102] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.286105] ACPI Warning: 0x0000000000000880-0x00000000000008af SystemIO conflicts with Region \_SB_.PCI0.ISA_.GIO3 1 (20121018/utaddress-251)
[ 7.286109] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.286111] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.546467] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb3
[ 7.548308] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb3
[ 7.549746] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb3
[ 7.551354] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 7.601793] leds_ss4200: no LED devices found
[ 7.688796] [drm] Initialized drm 1.1.0 20060810
[ 7.975932] kvm: disabled by bios
[ 7.976994] kvm: disabled by bios
[ 7.988824] kvm: disabled by bios
[ 8.002032] kvm: disabled by bios
[ 8.253506] coretemp coretemp.0: Using relative temperature scale!
[ 8.253520] coretemp coretemp.0: Using relative temperature scale!
[ 8.253535] coretemp coretemp.0: Using relative temperature scale!
[ 8.253703] coretemp coretemp.0: Using relative temperature scale!
[ 8.365449] [drm] radeon defaulting to kernel modesetting.
[ 8.365453] [drm] radeon kernel modesetting enabled.
[ 8.365715] [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x1028:0x01E6).
[ 8.365738] [drm] register mmio base: 0xFE5F0000
[ 8.365740] [drm] register mmio size: 65536
[ 8.365834] radeon 0000:05:05.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (16M used)
[ 8.365838] radeon 0000:05:05.0: GTT: 512M 0x00000000C8000000 - 0x00000000E7FFFFFF
[ 8.365853] mtrr: type mismatch for e8000000,8000000 old: write-back new: write-combining
[ 8.365855] [drm] Detected VRAM RAM=128M, BAR=128M
[ 8.365857] [drm] RAM width 16bits DDR
[ 8.365929] [TTM] Zone kernel: Available graphics memory: 122072 kiB
[ 8.365932] [TTM] Initializing pool allocator
[ 8.365937] [TTM] Initializing DMA pool allocator
[ 8.365962] [drm] radeon: 16M of VRAM memory ready
[ 8.365965] [drm] radeon: 512M of GTT memory ready.
[ 8.365979] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 8.387331] [drm] PCI GART of 512M enabled (table at 0x000000000D400000).
[ 8.387359] radeon 0000:05:05.0: WB disabled
[ 8.387363] radeon 0000:05:05.0: fence driver on ring 0 use gpu addr 0x00000000c8000000 and cpu addr 0xffff88000a8ff000
[ 8.387367] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.387368] [drm] Driver supports precise vblank timestamp query.
[ 8.387394] [drm] radeon: irq initialized.
[ 8.387474] [drm] Loading R100 Microcode
[ 8.539207] [drm] radeon: ring at 0x00000000C8001000
[ 8.539238] [drm] ring test succeeded in 0 usecs
[ 8.539387] [drm] ib test succeeded in 0 usecs
[ 8.539845] [drm] Radeon Display Connectors
[ 8.539847] [drm] Connector 0:
[ 8.539849] [drm] VGA-1
[ 8.539852] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 8.539853] [drm] Encoders:
[ 8.539855] [drm] CRT1: INTERNAL_DAC1
[ 8.549637] [drm] fb mappable at 0xE8040000
[ 8.549639] [drm] vram apper at 0xE8000000
[ 8.549641] [drm] size 786432
[ 8.549642] [drm] fb depth is 8
[ 8.549643] [drm] pitch is 1024
[ 8.549710] fbcon: radeondrmfb (fb0) is primary device
[ 8.698808] Console: switching to colour frame buffer device 128x48
[ 8.706329] radeon 0000:05:05.0: fb0: radeondrmfb frame buffer device
[ 8.706331] radeon 0000:05:05.0: registered panic notifier
[ 8.706338] [drm] Initialized radeon 2.29.0 20080528 for 0000:05:05.0 on minor 0
[ 9.211420] type=1400 audit(1380115834.003:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=532 comm="apparmor_parser"
[ 9.211431] type=1400 audit(1380115834.003:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=531 comm="apparmor_parser"
[ 9.211824] type=1400 audit(1380115834.003:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=531 comm="apparmor_parser"
[ 9.211902] type=1400 audit(1380115834.003:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=532 comm="apparmor_parser"
[ 9.212072] type=1400 audit(1380115834.003:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=531 comm="apparmor_parser"
[ 9.212153] type=1400 audit(1380115834.003:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=532 comm="apparmor_parser"
[ 9.212275] type=1400 audit(1380115834.003:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=533 comm="apparmor_parser"
[ 9.212682] type=1400 audit(1380115834.003:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=533 comm="apparmor_parser"
[ 9.212920] type=1400 audit(1380115834.003:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=533 comm="apparmor_parser"
[ 10.231614] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 10.252123] Bluetooth: Core ver 2.16
[ 10.252187] NET: Registered protocol family 31
[ 10.252189] Bluetooth: HCI device and connection manager initialized
[ 10.252277] Bluetooth: HCI socket layer initialized
[ 10.252281] Bluetooth: L2CAP socket layer initialized
[ 10.252288] Bluetooth: SCO socket layer initialized
[ 10.264040] floppy0: no floppy controllers found
[ 10.321043] Bluetooth: RFCOMM TTY layer initialized
[ 10.321058] Bluetooth: RFCOMM socket layer initialized
[ 10.321060] Bluetooth: RFCOMM ver 1.11
[ 10.401646] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.401649] Bluetooth: BNEP filters: protocol multicast
[ 10.401657] Bluetooth: BNEP socket layer initialized
[ 11.794903] tg3 0000:04:00.0 eth1: Link is up at 100 Mbps, half duplex
[ 11.794907] tg3 0000:04:00.0 eth1: Flow control is off for TX and off for RX
[ 11.794920] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 16.743938] init: failsafe main process (591) killed by TERM signal
[ 17.082379] type=1400 audit(1380115841.871:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=958 comm="apparmor_parser"
[ 17.082783] type=1400 audit(1380115841.871:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=958 comm="apparmor_parser"
[ 17.083014] type=1400 audit(1380115841.871:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=958 comm="apparmor_parser"
[ 17.143821] type=1400 audit(1380115841.935:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=960 comm="apparmor_parser"
[ 563.888077] usb 1-3.2: new full-speed USB device number 3 using ehci-pci
[ 563.983451] usb 1-3.2: New USB device found, idVendor=046d, idProduct=c52b
[ 563.983456] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 563.983460] usb 1-3.2: Product: USB Receiver
[ 563.983463] usb 1-3.2: Manufacturer: Logitech
[ 564.039501] usbcore: registered new interface driver usbhid
[ 564.039505] usbhid: USB HID core driver
[ 564.073600] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.7-3.2/input2
[ 564.076221] input: Logitech Unifying Device. Wireless PID:400e as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.2/1-3.2:1.2/0003:046D:C52B.0003/input/input1
[ 564.076386] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on usb-0000:00:1d.7-3.2:1