dmesg - madmacgzip
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-29-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #42-Ubuntu SMP Tue Aug 13 19:40:39 UTC 2013 (Ubuntu 3.8.0-29.42-generic 3.8.13.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000a6abefff] usable
BIOS-e820: [mem 0x00000000a6abf000-0x00000000a6ebefff] reserved
BIOS-e820: [mem 0x00000000a6ebf000-0x00000000a6fbefff] ACPI NVS
BIOS-e820: [mem 0x00000000a6fbf000-0x00000000a6ffefff] ACPI data
BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable
BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000024f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Acer AO756/Mimic , BIOS V1.02 04/26/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x24f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0A7000000 mask FFF000000 uncachable
3 base 0A8000000 mask FF8000000 uncachable
4 base 0B0000000 mask FF0000000 uncachable
5 base 0FFC00000 mask FFFC00000 write-protect
6 base 100000000 mask F00000000 write-back
7 base 200000000 mask FC0000000 write-back
8 base 240000000 mask FF0000000 write-back
9 base 24F600000 mask FFFE00000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xa7000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0xa6ffffff]
[mem 0x00000000-0xa6ffffff] page 2M
kernel direct mapping tables up to 0xa6ffffff @ [mem 0x1fffc000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x24f5fffff]
[mem 0x100000000-0x24f5fffff] page 2M
kernel direct mapping tables up to 0x24f5fffff @ [mem 0xa6ab8000-0xa6abefff]
RAMDISK: [mem 0x360fa000-0x37074fff]
ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
ACPI: XSDT 00000000a6ffe210 0008C (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 00000000a6ffb000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: DSDT 00000000a6fec000 0B57F (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: FACS 00000000a6fbb000 00040
ACPI: UEFI 00000000a6ffd000 00236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: ASF! 00000000a6ffc000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: HPET 00000000a6ffa000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: APIC 00000000a6ff9000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MCFG 00000000a6ff8000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SLIC 00000000a6feb000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 00000000a6fea000 006FE (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: BOOT 00000000a6fe8000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: ASPT 00000000a6fe3000 00034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: FPDT 00000000a6fe1000 00044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 00000000a6fe0000 00716 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 00000000a6fdf000 00A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000024f5fffff]
Initmem setup node 0 [mem 0x00000000-0x24f5fffff]
NODE_DATA [mem 0x24f5fb000-0x24f5fffff]
[ffffea0000000000-ffffea00093fffff] PMD -> [ffff880246e00000-ffff88024ebfffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x24f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0xa6abefff]
node 0: [mem 0xa6fff000-0xa6ffffff]
node 0: [mem 0x100000000-0x24f5fffff]
On node 0 totalpages: 2055245
DMA zone: 64 pages used for memmap
DMA zone: 141 pages reserved
DMA zone: 3776 pages, LIFO batch:0
DMA32 zone: 10587 pages used for memmap
DMA32 zone: 666981 pages, LIFO batch:31
Normal zone: 21464 pages used for memmap
Normal zone: 1352232 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 6 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040000000 - 0000000040200000
PM: Registered nosave memory: 00000000a6abf000 - 00000000a6ebf000
PM: Registered nosave memory: 00000000a6ebf000 - 00000000a6fbf000
PM: Registered nosave memory: 00000000a6fbf000 - 00000000a6fff000
PM: Registered nosave memory: 00000000a7000000 - 00000000afa00000
PM: Registered nosave memory: 00000000afa00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffc80000
PM: Registered nosave memory: 00000000ffc80000 - 0000000100000000
e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88024f200000 s85056 r8192 d21440 u262144
pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022989
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7992768k/9689088k available (7013k kernel code, 1468108k absent, 228212k reserved, 6229k data, 996k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
NR_IRQS:16640 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33030144 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1296.924 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2593.84 BogoMIPS (lpj=5187696)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26712 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) CPU 967 @ 1.30GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
smpboot: Booting Node 0, Processors #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (5187.69 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xa6ebf000-0xa6fbefff] (1048576 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000a6e28018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: SSDT 00000000a6e29a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: SSDT 00000000a6e27d98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
_OSC request data:1 8 0
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x2000-0x203f]
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xc0604000-0xc060400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xc0609000-0xc06093ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xc0600000-0xc0603fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xc0608000-0xc06083ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e5e] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x2088-0x208f]
pci 0000:00:1f.2: reg 14: [io 0x2094-0x2097]
pci 0000:00:1f.2: reg 18: [io 0x2080-0x2087]
pci 0000:00:1f.2: reg 1c: [io 0x2090-0x2093]
pci 0000:00:1f.2: reg 20: [io 0x2060-0x207f]
pci 0000:00:1f.2: reg 24: [mem 0xc0607000-0xc06077ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xc0605000-0xc06050ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x2040-0x205f]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [168c:0034] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xc0500000-0xc057ffff 64bit]
pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff]
pci 0000:04:00.0: [14e4:16b5] type 00 class 0x020000
pci 0000:04:00.0: reg 10: [mem 0xc0410000-0xc041ffff 64bit pref]
pci 0000:04:00.0: reg 18: [mem 0xc0420000-0xc042ffff 64bit pref]
pci 0000:04:00.0: reg 30: [mem 0xfffff800-0xffffffff pref]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: [14e4:16bc] type 00 class 0x080501
pci 0000:04:00.1: reg 10: [mem 0xc0400000-0xc040ffff 64bit pref]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
_OSC request data:1 1f 0
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xa6abf000-0xa7ffffff]
e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff]
e820: reserve RAM buffer [mem 0x24f600000-0x24fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs SYN1b61 SYN1b00 SYN0002 PNP0f13 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:06: [io 0x0680-0x069f] has been reserved
system 00:06: [io 0xfd60-0xfd63] has been reserved
system 00:06: [io 0x1000-0x100f] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0x0400-0x0453] has been reserved
system 00:06: [io 0x0458-0x047f] has been reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [io 0x164e-0x164f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:08: [io 0x0454-0x0457] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xff000000-0xff000fff] has been reserved
system 00:09: [mem 0xff010000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
system 00:0a: [mem 0x40000000-0x401fffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:04:00.0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref]
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xafb00000-0xafcfffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xafd00000-0xafefffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xaff00000-0xafffffff pref]
pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0700000-0xc07fffff]
pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xafb00000-0xafcfffff]
pci 0000:00:1c.0: bridge window [mem 0xafd00000-0xafefffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xaff00000-0xaff0ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff]
pci 0000:00:1c.1: bridge window [mem 0xaff00000-0xafffffff pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xc0430000-0xc04307ff pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xc0700000-0xc07fffff]
pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xafb00000-0xafcfffff]
pci_bus 0000:02: resource 2 [mem 0xafd00000-0xafefffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff]
pci_bus 0000:03: resource 2 [mem 0xaff00000-0xafffffff pref]
pci_bus 0000:04: resource 1 [mem 0xc0700000-0xc07fffff]
pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15852k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa2ab8000-0xa6ab8000] (64MB) mapped at [ffff8800a2ab8000-ffff8800a6ab7fff]
Simple Boot Flag at 0x44 set to 0x1
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1378403871.892:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 15641
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ACAD] (off-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT1] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0609000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-29-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0608000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-29-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
rtc_cmos 00:07: setting system clock to 2013-09-05 17:57:53 UTC (1378403873)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 996k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1168k freed
Freeing unused kernel memory: 1076k freed
udevd[95]: starting version 175
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:04:00.1: SDHCI controller found [14e4:16bc] (rev 10)
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
Disabling lock debugging due to kernel taint
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc0607000 port 0xc0607100 irq 40
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
mmc0: SDHCI controller on PCI [0000:04:00.1] using ADMA
tg3.c:v3.128 (December 03, 2012)
tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address dc:0e:a1:ba:d4:be
tg3 0000:04:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:04:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 1297.053 MHz
Switching to clocksource tsc
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST320LT020-9YG142, 0010SDM1, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST320LT020-9YG14 0010 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 2-1: new high-speed USB device number 2 using ehci-pci
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -22
usb 1-1.1: New USB device found, idVendor=0489, idProduct=e04e
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: new high-speed USB device number 4 using ehci-pci
usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b336
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: HD WebCam
usb 1-1.3: Manufacturer: HD WebCam
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1.3: new low-speed USB device number 3 using ehci-pci
usb 2-1.3: New USB device found, idVendor=046d, idProduct=c045
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3: Product: USB-PS/2 Optical Mouse
usb 2-1.3: Manufacturer: Logitech
Adding 4026364k swap on /dev/sda5. Priority:-1 extents:1 across:4026364k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[350]: starting version 175
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
wmi: Mapper loaded
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 41 for MSI/MSI-X
lp: driver loaded but no devices found
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x801
acer_wmi: Disabling ACPI video driver
input: Acer WMI hotkeys as /devices/virtual/input/input5
input: Acer BMA150 accelerometer as /devices/virtual/input/input6
usbcore: registered new interface driver btusb
usbcore: registered new interface driver ath3k
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26
microcode: Microcode Update Driver: v2.00 , Peter Oruba
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[drm] Memory usable by graphics device = 2048M
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x6c
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6c
fbcon: inteldrmfb (fb0) is primary device
type=1400 audit(1378393089.214:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=481 comm="apparmor_parser"
type=1400 audit(1378393089.214:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=484 comm="apparmor_parser"
type=1400 audit(1378393089.218:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=481 comm="apparmor_parser"
type=1400 audit(1378393089.218:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=484 comm="apparmor_parser"
type=1400 audit(1378393089.218:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=481 comm="apparmor_parser"
type=1400 audit(1378393089.218:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=484 comm="apparmor_parser"
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90021680000, irq=17
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00, board id: 2292, fw id: 1146734
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Linux video capture interface: v2.00
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input12
hid-generic 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.3/input0
uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b336)
input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: failsafe main process (840) killed by TERM signal
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1378393093.006:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=957 comm="apparmor_parser"
type=1400 audit(1378393093.006:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=957 comm="apparmor_parser"
type=1400 audit(1378393093.006:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=958 comm="apparmor_parser"
type=1400 audit(1378393093.010:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=958 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: avahi-cups-reload main process (985) terminated with status 1
ppdev: user-space parallel port driver
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:04:00.0: irq 44 for MSI/MSI-X
tg3 0000:04:00.0: irq 45 for MSI/MSI-X
tg3 0000:04:00.0: irq 46 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: anacron main process (1076) killed by TERM signal
init: plymouth-stop pre-start process (1519) terminated with status 1
wlan0: authenticate with cc:5d:4e:2a:5a:8b
wlan0: send auth to cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: authenticated
wlan0: associate with cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: RX AssocResp from cc:5d:4e:2a:5a:8b (capab=0xc21 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[Firmware Bug]: battery: (dis)charge rate invalid.
systemd-hostnamed[19030]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with cc:5d:4e:2a:5a:8b
wlan0: send auth to cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: authenticated
wlan0: associate with cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: RX AssocResp from cc:5d:4e:2a:5a:8b (capab=0xc21 status=0 aid=1)
wlan0: associated
usb 2-1.2: new high-speed USB device number 4 using ehci-pci
usb 2-1.2: New USB device found, idVendor=0fce, idProduct=0169
usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 2-1.2: Product: LT26i
usb 2-1.2: Manufacturer: Sony Ericsson
usb 2-1.2: SerialNumber: CB511XVKTF
systemd-hostnamed[23465]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 2-1.2: USB disconnect, device number 4
usb 2-1.2: new high-speed USB device number 5 using ehci-pci
usb 2-1.2: New USB device found, idVendor=0fce, idProduct=0169
usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 2-1.2: Product: LT26i
usb 2-1.2: Manufacturer: Sony Ericsson
usb 2-1.2: SerialNumber: CB511XVKTF
systemd-hostnamed[29475]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 2-1.2: USB disconnect, device number 5
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with cc:5d:4e:2a:5a:8b
wlan0: send auth to cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: authenticated
wlan0: associate with cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: RX AssocResp from cc:5d:4e:2a:5a:8b (capab=0xc21 status=0 aid=1)
wlan0: associated
usb 2-1.2: new full-speed USB device number 6 using ehci-pci
usb 2-1.2: device descriptor read/64, error -32
usb 2-1.2: device descriptor read/64, error -32
usb 2-1.2: new full-speed USB device number 7 using ehci-pci
usb 2-1.2: device descriptor read/64, error -32
usb 2-1.2: device descriptor read/64, error -32
usb 2-1.2: new full-speed USB device number 8 using ehci-pci
usb 2-1.2: device not accepting address 8, error -32
usb 2-1.2: new full-speed USB device number 9 using ehci-pci
usb 2-1.2: device not accepting address 9, error -32
hub 2-1:1.0: unable to enumerate USB device on port 2
usb 2-1.2: new full-speed USB device number 10 using ehci-pci
usb 2-1.2: device descriptor read/64, error -32
usb 2-1.2: device descriptor read/64, error -32
usb 2-1.2: new full-speed USB device number 11 using ehci-pci
usb 2-1.2: device descriptor read/64, error -32
usb 2-1.2: device descriptor read/64, error -32
usb 2-1.2: new full-speed USB device number 12 using ehci-pci
usb 2-1.2: device not accepting address 12, error -32
hub 2-1:1.0: unable to enumerate USB device on port 2
usb 2-1.2: new high-speed USB device number 14 using ehci-pci
usb 2-1.2: New USB device found, idVendor=0fce, idProduct=0169
usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 2-1.2: Product: LT26i
usb 2-1.2: Manufacturer: Sony Ericsson
usb 2-1.2: SerialNumber: CB511XVKTF
systemd-hostnamed[4120]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 2-1.2: USB disconnect, device number 14
usb 2-1.2: new full-speed USB device number 15 using ehci-pci
usb 2-1.2: device descriptor read/64, error -32
usb 2-1.2: device descriptor read/64, error -32
usb 2-1.2: new full-speed USB device number 16 using ehci-pci
usb 2-1.2: device descriptor read/64, error -32
usb 2-1.2: device descriptor read/64, error -32
usb 2-1.2: new full-speed USB device number 17 using ehci-pci
usb 2-1.2: device not accepting address 17, error -32
usb 2-1.2: new full-speed USB device number 18 using ehci-pci
usb 2-1.2: device not accepting address 18, error -32
hub 2-1:1.0: unable to enumerate USB device on port 2
usb 2-1.2: new high-speed USB device number 19 using ehci-pci
usb 2-1.2: New USB device found, idVendor=0fce, idProduct=0169
usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 2-1.2: Product: LT26i
usb 2-1.2: Manufacturer: Sony Ericsson
usb 2-1.2: SerialNumber: CB511XVKTF
systemd-hostnamed[12338]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 2-1.2: USB disconnect, device number 19
wlan0: deauthenticating from cc:5d:4e:2a:5a:8b by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
tg3 0000:04:00.0: System wakeup enabled by ACPI
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 403.634 msecs
PM: late suspend of devices complete after 0.214 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.708 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 17
Broke affinity for irq 23
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 141.185 msecs
PM: early resume of devices complete after 0.136 msecs
i915 0000:00:02.0: setting latency timer to 64
mei 0000:00:16.0: irq 41 for MSI/MSI-X
ehci-pci 0000:00:1a.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
ath: phy0: ASPM enabled: 0x42
tg3 0000:04:00.0: System wakeup disabled by ACPI
usb 1-1.1: reset full-speed USB device number 3 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2435.393 msecs
usb 1-1.1: USB disconnect, device number 3
Restarting tasks ... done.
usb 1-1.1: new full-speed USB device number 5 using ehci-pci
video LNXVIDEO:00: Restoring backlight state
usb 1-1.1: string descriptor 0 read error: -22
usb 1-1.1: New USB device found, idVendor=0489, idProduct=e04e
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: USB disconnect, device number 5
usb 1-1.1: new full-speed USB device number 6 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -22
usb 1-1.1: New USB device found, idVendor=0489, idProduct=e04e
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:04:00.0: irq 44 for MSI/MSI-X
tg3 0000:04:00.0: irq 45 for MSI/MSI-X
tg3 0000:04:00.0: irq 46 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: authenticate with cc:5d:4e:2a:5a:8b
wlan0: send auth to cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: authenticated
wlan0: associate with cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: RX AssocResp from cc:5d:4e:2a:5a:8b (capab=0xc21 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
usb 2-1.2: new high-speed USB device number 20 using ehci-pci
usb 2-1.2: New USB device found, idVendor=0fce, idProduct=0169
usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 2-1.2: Product: LT26i
usb 2-1.2: Manufacturer: Sony Ericsson
usb 2-1.2: SerialNumber: CB511XVKTF
systemd-hostnamed[18726]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
wlan0: deauthenticated from cc:5d:4e:2a:5a:8b (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with cc:5d:4e:2a:5a:8b
wlan0: send auth to cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: authenticated
wlan0: associate with cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: RX AssocResp from cc:5d:4e:2a:5a:8b (capab=0xc21 status=0 aid=1)
wlan0: associated
usb 2-1.2: USB disconnect, device number 20
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with cc:5d:4e:2a:5a:8b
wlan0: send auth to cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: authenticated
wlan0: associate with cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: RX AssocResp from cc:5d:4e:2a:5a:8b (capab=0xc21 status=0 aid=1)
wlan0: associated
usb 2-1.2: new high-speed USB device number 21 using ehci-pci
usb 2-1.2: New USB device found, idVendor=0fce, idProduct=0169
usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 2-1.2: Product: LT26i
usb 2-1.2: Manufacturer: Sony Ericsson
usb 2-1.2: SerialNumber: CB511XVKTF
systemd-hostnamed[9777]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
Btrfs loaded
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with cc:5d:4e:2a:5a:8b
wlan0: send auth to cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: authenticated
wlan0: associate with cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: RX AssocResp from cc:5d:4e:2a:5a:8b (capab=0xc21 status=0 aid=1)
wlan0: associated
systemd-hostnamed[11111]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 2-1.2: USB disconnect, device number 21
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with cc:5d:4e:2a:5a:8b
wlan0: send auth to cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: authenticated
wlan0: associate with cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: RX AssocResp from cc:5d:4e:2a:5a:8b (capab=0xc21 status=0 aid=1)
wlan0: associated
usb 2-1.2: new high-speed USB device number 22 using ehci-pci
usb 2-1.2: New USB device found, idVendor=0fce, idProduct=0169
usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 2-1.2: Product: LT26i
usb 2-1.2: Manufacturer: Sony Ericsson
usb 2-1.2: SerialNumber: CB511XVKTF
systemd-hostnamed[31214]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with cc:5d:4e:2a:5a:8b
wlan0: send auth to cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: authenticated
wlan0: associate with cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: RX AssocResp from cc:5d:4e:2a:5a:8b (capab=0xc21 status=0 aid=1)
wlan0: associated
usb 2-1.2: USB disconnect, device number 22
usb 2-1.2: new high-speed USB device number 23 using ehci-pci
usb 2-1.2: New USB device found, idVendor=0fce, idProduct=0169
usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 2-1.2: Product: LT26i
usb 2-1.2: Manufacturer: Sony Ericsson
usb 2-1.2: SerialNumber: CB511XVKTF
systemd-hostnamed[31653]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 2-1.2: USB disconnect, device number 23
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with cc:5d:4e:2a:5a:8b
wlan0: send auth to cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: authenticated
wlan0: associate with cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: RX AssocResp from cc:5d:4e:2a:5a:8b (capab=0xc21 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from cc:5d:4e:2a:5a:8b by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
tg3 0000:04:00.0: System wakeup enabled by ACPI
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 403.640 msecs
PM: late suspend of devices complete after 0.217 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.706 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 17
Broke affinity for irq 23
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 140.990 msecs
PM: early resume of devices complete after 0.140 msecs
i915 0000:00:02.0: setting latency timer to 64
mei 0000:00:16.0: irq 41 for MSI/MSI-X
ehci-pci 0000:00:1a.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
ath: phy0: ASPM enabled: 0x42
tg3 0000:04:00.0: System wakeup disabled by ACPI
usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
usb 1-1.1: reset full-speed USB device number 6 using ehci-pci
usb 1-1.1: device firmware changed
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2428.060 msecs
usb 1-1.1: USB disconnect, device number 6
Restarting tasks ... done.
usb 1-1.1: new full-speed USB device number 7 using ehci-pci
video LNXVIDEO:00: Restoring backlight state
usb 1-1.1: string descriptor 0 read error: -22
usb 1-1.1: New USB device found, idVendor=0489, idProduct=e04e
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: USB disconnect, device number 7
usb 1-1.1: new full-speed USB device number 8 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -22
usb 1-1.1: New USB device found, idVendor=0489, idProduct=e04e
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:04:00.0: irq 44 for MSI/MSI-X
tg3 0000:04:00.0: irq 45 for MSI/MSI-X
tg3 0000:04:00.0: irq 46 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: authenticate with cc:5d:4e:2a:5a:8b
wlan0: send auth to cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: authenticated
wlan0: associate with cc:5d:4e:2a:5a:8b (try 1/3)
wlan0: RX AssocResp from cc:5d:4e:2a:5a:8b (capab=0xc21 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready