dmesg - Complex
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-52-generic (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #78-Ubuntu SMP Fri Jul 26 16:21:44 UTC 2013 (Ubuntu 3.2.0-52.78-generic 3.2.48)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000defafe00 (usable)
[ 0.000000] BIOS-e820: 00000000defb1e00 - 00000000defb1ea0 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000defb1ea0 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000019c000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Hewlett-Packard HP Compaq dc7800 Convertible Minitower/0AACh, BIOS 786F1 v01.04 07/18/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x19c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E3FFF write-protect
[ 0.000000] E4000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask F80000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 19C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 180000000 mask FE0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 6592MB, range: 64MB, type UC
[ 0.000000] reg 4, base: 6GB, range: 512MB, type WB
[ 0.000000] total RAM covered: 6080M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 4, base: 6GB, range: 512MB, type WB
[ 0.000000] reg 5, base: 6592MB, range: 64MB, type UC
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdefaf max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f9bf0] f9bf0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000defaf000
[ 0.000000] 0000000000 - 00dee00000 page 2M
[ 0.000000] 00dee00000 - 00defaf000 page 4k
[ 0.000000] kernel direct mapping tables up to defaf000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000019c000000
[ 0.000000] 0100000000 - 019c000000 page 2M
[ 0.000000] kernel direct mapping tables up to 19c000000 @ defab000-defaf000
[ 0.000000] RAMDISK: 357a6000 - 36bcb000
[ 0.000000] ACPI: RSDP 00000000000e5c10 00014 (v00 COMPAQ)
[ 0.000000] ACPI: RSDT 00000000defc1e40 00044 (v01 HPQOEM SLIC-BPC 20070718 00000000)
[ 0.000000] ACPI: FACP 00000000defc1ee8 00074 (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.000000] ACPI: DSDT 00000000defc2427 0A4D3 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000defc1e00 00040
[ 0.000000] ACPI: APIC 00000000defc1f5c 00084 (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.000000] ACPI: ASF! 00000000defc1fe0 00063 (v32 COMPAQ BEARLAKE 00000001 00000000)
[ 0.000000] ACPI: MCFG 00000000defc2043 0003C (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.000000] ACPI: TCPA 00000000defc207f 00032 (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.000000] ACPI: SLIC 00000000defc20b1 00176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
[ 0.000000] ACPI: HPET 00000000defc2227 00038 (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.000000] ACPI: DMAR 00000000defc225f 00160 (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000019c000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000019c000000
[ 0.000000] NODE_DATA [000000019bffb000 - 000000019bffffff]
[ 0.000000] [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880195600000-ffff88019b5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0019c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000defaf
[ 0.000000] 0: 0x00100000 -> 0x0019c000
[ 0.000000] On node 0 totalpages: 1552190
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 892911 pages, LIFO batch:31
[ 0.000000] Normal zone: 9984 pages used for memmap
[ 0.000000] Normal zone: 628992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000defaf000 - 00000000defb2000
[ 0.000000] PM: Registered nosave memory: 00000000defb1000 - 00000000defb2000
[ 0.000000] PM: Registered nosave memory: 00000000defb2000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:14000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88019bc00000 s83136 r8192 d23360 u524288
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1525817
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6007480k/6750208k available (6583k kernel code, 541448k absent, 201280k reserved, 6623k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 50331648 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2327.282 MHz processor.
[ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4654.56 BogoMIPS (lpj=9309128)
[ 0.008009] pid_max: default: 32768 minimum: 301
[ 0.008038] Security Framework initialized
[ 0.008056] AppArmor: AppArmor initialized
[ 0.008058] Yama: becoming mindful.
[ 0.008776] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.016277] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.019891] Mount-cache hash table entries: 256
[ 0.020120] Initializing cgroup subsys cpuacct
[ 0.020126] Initializing cgroup subsys memory
[ 0.020138] Initializing cgroup subsys devices
[ 0.020140] Initializing cgroup subsys freezer
[ 0.020142] Initializing cgroup subsys blkio
[ 0.020152] Initializing cgroup subsys perf_event
[ 0.020185] CPU: Physical Processor ID: 0
[ 0.020187] CPU: Processor Core ID: 0
[ 0.020189] mce: CPU supports 6 MCE banks
[ 0.020198] CPU0: Thermal monitoring enabled (TM2)
[ 0.020202] using mwait in idle threads.
[ 0.022724] ACPI: Core revision 20110623
[ 0.027915] ftrace: allocating 26587 entries in 105 pages
[ 0.032058] DMAR: Host address width 36
[ 0.032061] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.032072] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020a30270 ecap 1000
[ 0.032075] DMAR: DRHD base: 0x000000fed92000 flags: 0x0
[ 0.032080] IOMMU 1: reg_base_addr fed92000 ver 1:0 cap c0000020230270 ecap 1000
[ 0.032082] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.032087] IOMMU 2: reg_base_addr fed93000 ver 1:0 cap c9008020230270 ecap 1000
[ 0.032089] DMAR: RMRR base: 0x000000defd0000 end: 0x000000defd0fff
[ 0.032091] DMAR: RMRR base: 0x000000defd1000 end: 0x000000defd1fff
[ 0.032093] DMAR: RMRR base: 0x000000defd2000 end: 0x000000defd2fff
[ 0.032095] DMAR: RMRR base: 0x000000defd3000 end: 0x000000defd3fff
[ 0.032097] DMAR: RMRR base: 0x000000defd4000 end: 0x000000defd4fff
[ 0.032099] DMAR: RMRR base: 0x000000defd5000 end: 0x000000defd5fff
[ 0.032100] DMAR: RMRR base: 0x000000defd6000 end: 0x000000defd6fff
[ 0.032533] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074755] CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b
[ 0.076004] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.076004] PEBS disabled due to CPU errata.
[ 0.076004] ... version: 2
[ 0.076004] ... bit width: 40
[ 0.076004] ... generic registers: 2
[ 0.076004] ... value mask: 000000ffffffffff
[ 0.076004] ... max period: 000000007fffffff
[ 0.076004] ... fixed-purpose events: 3
[ 0.076004] ... event mask: 0000000700000003
[ 0.076004] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.076004] Booting Node 0, Processors #1
[ 0.076004] smpboot cpu 1: start_ip = 9a000
[ 0.164042] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.164087] Brought up 2 CPUs
[ 0.164089] Total of 2 processors activated (9309.56 BogoMIPS).
[ 0.165994] devtmpfs: initialized
[ 0.165994] EVM: security.selinux
[ 0.165994] EVM: security.SMACK64
[ 0.165994] EVM: security.capability
[ 0.165994] PM: Registering ACPI NVS region at defb1e00 (160 bytes)
[ 0.168025] print_constraints: dummy:
[ 0.168053] RTC time: 22:28:27, date: 08/22/13
[ 0.168089] NET: Registered protocol family 16
[ 0.168222] Trying to unpack rootfs image as initramfs...
[ 0.168222] ACPI: bus type pci registered
[ 0.168284] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.168287] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.178336] PCI: Using configuration type 1 for base access
[ 0.184186] bio: create slab at 0
[ 0.184186] ACPI: Added _OSI(Module Device)
[ 0.184186] ACPI: Added _OSI(Processor Device)
[ 0.184186] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.184186] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.188107] ACPI: EC: Look up EC in DSDT
[ 0.268086] ACPI: SSDT 00000000defcd42b 003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
[ 0.268385] ACPI: Dynamic OEM Table Load:
[ 0.268388] ACPI: SSDT (null) 003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
[ 0.324271] ACPI: Interpreter enabled
[ 0.324283] ACPI: (supports S0 S3 S4 S5)
[ 0.324304] ACPI: Using IOAPIC for interrupt routing
[ 0.328835] ACPI: No dock devices found.
[ 0.328838] HEST: Table not found.
[ 0.328842] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.364268] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
[ 0.364276] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88019104d618), AE_ALREADY_EXISTS (20110623/psparse-536)
[ 0.364284] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.364289] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
[ 0.364296] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.364648] pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored)
[ 0.364651] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.364654] pci_root PNP0A08:00: host bridge window [io 0x1000-0x2fff] (ignored)
[ 0.364656] pci_root PNP0A08:00: host bridge window [io 0x3000-0x6fff] (ignored)
[ 0.364658] pci_root PNP0A08:00: host bridge window [io 0x7000-0xafff] (ignored)
[ 0.364661] pci_root PNP0A08:00: host bridge window [io 0xb000-0xffff] (ignored)
[ 0.364663] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.364665] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf3ffffff] (ignored)
[ 0.364668] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
[ 0.364680] pci 0000:00:00.0: [8086:29b0] type 0 class 0x000600
[ 0.364733] pci 0000:00:01.0: [8086:29b1] type 1 class 0x000604
[ 0.364770] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.364773] pci 0000:00:01.0: PME# disabled
[ 0.364790] pci 0000:00:03.0: [8086:29b4] type 0 class 0x000780
[ 0.364803] pci 0000:00:03.0: reg 10: [mem 0xf3126900-0xf312690f 64bit]
[ 0.364844] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.364847] pci 0000:00:03.0: PME# disabled
[ 0.364864] pci 0000:00:03.2: [8086:29b6] type 0 class 0x000101
[ 0.364881] pci 0000:00:03.2: reg 10: [io 0x2230-0x2237]
[ 0.364887] pci 0000:00:03.2: reg 14: [io 0x2268-0x226b]
[ 0.364893] pci 0000:00:03.2: reg 18: [io 0x2238-0x223f]
[ 0.364899] pci 0000:00:03.2: reg 1c: [io 0x226c-0x226f]
[ 0.364905] pci 0000:00:03.2: reg 20: [io 0x21e0-0x21ef]
[ 0.364947] pci 0000:00:03.3: [8086:29b7] type 0 class 0x000700
[ 0.364958] pci 0000:00:03.3: reg 10: [io 0x2240-0x2247]
[ 0.364964] pci 0000:00:03.3: reg 14: [mem 0xf3124000-0xf3124fff]
[ 0.365042] pci 0000:00:19.0: [8086:10bd] type 0 class 0x000200
[ 0.365058] pci 0000:00:19.0: reg 10: [mem 0xf3100000-0xf311ffff]
[ 0.365066] pci 0000:00:19.0: reg 14: [mem 0xf3125000-0xf3125fff]
[ 0.365074] pci 0000:00:19.0: reg 18: [io 0x2100-0x211f]
[ 0.365134] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.365137] pci 0000:00:19.0: PME# disabled
[ 0.365160] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.365199] pci 0000:00:1a.0: reg 20: [io 0x2120-0x213f]
[ 0.365246] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.365285] pci 0000:00:1a.1: reg 20: [io 0x2140-0x215f]
[ 0.365341] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.365361] pci 0000:00:1a.7: reg 10: [mem 0xf3126000-0xf31263ff]
[ 0.365450] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.365454] pci 0000:00:1a.7: PME# disabled
[ 0.365477] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.365491] pci 0000:00:1b.0: reg 10: [mem 0xf3120000-0xf3123fff 64bit]
[ 0.365553] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.365556] pci 0000:00:1b.0: PME# disabled
[ 0.365575] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.365637] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.365641] pci 0000:00:1c.0: PME# disabled
[ 0.365663] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.365730] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.365734] pci 0000:00:1c.1: PME# disabled
[ 0.365760] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.365799] pci 0000:00:1d.0: reg 20: [io 0x2160-0x217f]
[ 0.365847] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.365886] pci 0000:00:1d.1: reg 20: [io 0x2180-0x219f]
[ 0.365934] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.365978] pci 0000:00:1d.2: reg 20: [io 0x21a0-0x21bf]
[ 0.366035] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.366054] pci 0000:00:1d.7: reg 10: [mem 0xf3126400-0xf31267ff]
[ 0.366143] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.366147] pci 0000:00:1d.7: PME# disabled
[ 0.366165] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.366223] pci 0000:00:1f.0: [8086:2914] type 0 class 0x000601
[ 0.366296] pci 0000:00:1f.0: quirk: [io 0xf800-0xf87f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.366301] pci 0000:00:1f.0: quirk: [io 0xfa00-0xfa3f] claimed by ICH6 GPIO
[ 0.366305] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
[ 0.366309] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
[ 0.366313] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
[ 0.366359] pci 0000:00:1f.2: [8086:2920] type 0 class 0x000101
[ 0.366373] pci 0000:00:1f.2: reg 10: [io 0x2248-0x224f]
[ 0.366380] pci 0000:00:1f.2: reg 14: [io 0x2270-0x2273]
[ 0.366388] pci 0000:00:1f.2: reg 18: [io 0x2250-0x2257]
[ 0.366395] pci 0000:00:1f.2: reg 1c: [io 0x2274-0x2277]
[ 0.366402] pci 0000:00:1f.2: reg 20: [io 0x21f0-0x21ff]
[ 0.366410] pci 0000:00:1f.2: reg 24: [io 0x2200-0x220f]
[ 0.366463] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
[ 0.366479] pci 0000:00:1f.5: reg 10: [io 0x2258-0x225f]
[ 0.366487] pci 0000:00:1f.5: reg 14: [io 0x2278-0x227b]
[ 0.366494] pci 0000:00:1f.5: reg 18: [io 0x2260-0x2267]
[ 0.366501] pci 0000:00:1f.5: reg 1c: [io 0x227c-0x227f]
[ 0.366509] pci 0000:00:1f.5: reg 20: [io 0x2210-0x221f]
[ 0.366516] pci 0000:00:1f.5: reg 24: [io 0x2220-0x222f]
[ 0.366588] pci 0000:01:00.0: [10de:0a65] type 0 class 0x000300
[ 0.366598] pci 0000:01:00.0: reg 10: [mem 0xf2000000-0xf2ffffff]
[ 0.366608] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.366618] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.366625] pci 0000:01:00.0: reg 24: [io 0x1100-0x117f]
[ 0.366632] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.366690] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[ 0.366700] pci 0000:01:00.1: reg 10: [mem 0xf3000000-0xf3003fff]
[ 0.366785] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.366788] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 0.366791] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf30fffff]
[ 0.366796] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.366832] pci 0000:00:1c.0: PCI bridge to [bus 20-20]
[ 0.366874] pci 0000:00:1c.1: PCI bridge to [bus 30-30]
[ 0.366936] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
[ 0.366945] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.366948] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.366970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.367109] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
[ 0.367160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
[ 0.367199] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT]
[ 0.367243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 0.367388] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
[ 0.367395] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88019104d618), AE_ALREADY_EXISTS (20110623/psparse-536)
[ 0.367404] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
[ 0.367411] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.367454] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
[ 0.367460] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88019104d618), AE_ALREADY_EXISTS (20110623/psparse-536)
[ 0.367469] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
[ 0.367474] pci0000:00: ACPI _OSC request failed (AE_ALREADY_EXISTS), returned control mask: 0x1d
[ 0.367476] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.377717] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.377765] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.377811] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.377856] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.377901] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.377945] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.377990] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.378034] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.378179] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.378182] vgaarb: loaded
[ 0.378184] vgaarb: bridge control possible 0000:01:00.0
[ 0.378295] i2c-core: driver [aat2870] using legacy suspend method
[ 0.378297] i2c-core: driver [aat2870] using legacy resume method
[ 0.378372] SCSI subsystem initialized
[ 0.378437] libata version 3.00 loaded.
[ 0.378487] usbcore: registered new interface driver usbfs
[ 0.378498] usbcore: registered new interface driver hub
[ 0.378528] usbcore: registered new device driver usb
[ 0.378624] PCI: Using ACPI for IRQ routing
[ 0.379935] PCI: pci_cache_line_size set to 64 bytes
[ 0.380012] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.380028] reserve RAM buffer: 00000000defafe00 - 00000000dfffffff
[ 0.380132] NetLabel: Initializing
[ 0.380134] NetLabel: domain hash size = 128
[ 0.380135] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.380146] NetLabel: unlabeled traffic allowed by default
[ 0.380191] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.380196] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.380202] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.384074] Switching to clocksource hpet
[ 0.392800] AppArmor: AppArmor Filesystem Enabled
[ 0.392833] pnp: PnP ACPI init
[ 0.392853] ACPI: bus type pnp registered
[ 0.393058] pnp 00:00: [mem 0xf8000000-0xfebfffff window]
[ 0.393061] pnp 00:00: [bus 00-ff]
[ 0.393063] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.393065] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.393067] pnp 00:00: [io 0x1000-0x2fff window]
[ 0.393069] pnp 00:00: [io 0x3000-0x6fff window]
[ 0.393071] pnp 00:00: [io 0x7000-0xafff window]
[ 0.393073] pnp 00:00: [io 0xb000-0xffff window]
[ 0.393075] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.393078] pnp 00:00: [mem 0xe0000000-0xf3ffffff window]
[ 0.393080] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.393145] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.393158] pnp 00:01: [io 0x00f0-0x00ff]
[ 0.393170] pnp 00:01: [irq 13]
[ 0.393196] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.393209] pnp 00:02: [io 0x0000-0x000f]
[ 0.393211] pnp 00:02: [io 0x0080-0x008f]
[ 0.393213] pnp 00:02: [io 0x00c0-0x00df]
[ 0.393215] pnp 00:02: [dma 4]
[ 0.393242] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.393252] pnp 00:03: [io 0x0070-0x0071]
[ 0.393256] pnp 00:03: [irq 8]
[ 0.393285] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.393294] pnp 00:04: [io 0x0061]
[ 0.393321] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.393333] pnp 00:05: [irq 12]
[ 0.393360] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.393371] pnp 00:06: [io 0x0060]
[ 0.393373] pnp 00:06: [io 0x0064]
[ 0.393377] pnp 00:06: [irq 1]
[ 0.393402] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.393580] pnp 00:07: [irq 7]
[ 0.393583] pnp 00:07: [io 0x0378-0x037a]
[ 0.393639] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.393760] pnp 00:08: [irq 4]
[ 0.393763] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.393829] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.393975] pnp 00:09: [irq 6]
[ 0.393977] pnp 00:09: [dma 2]
[ 0.393979] pnp 00:09: [io 0x03f0-0x03f5]
[ 0.393981] pnp 00:09: [io 0x03f7]
[ 0.394018] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.394059] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.394086] pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.394096] pnp 00:0b: [io 0x004e-0x004f]
[ 0.394099] pnp 00:0b: [io 0x0cb0-0x0cbb]
[ 0.394101] pnp 00:0b: [mem 0xfed40000-0xfed44fff]
[ 0.394130] pnp 00:0b: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.394163] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[ 0.394193] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.394349] pnp 00:0d: [io 0x0010-0x001f]
[ 0.394351] pnp 00:0d: [io 0x0050-0x0053]
[ 0.394353] pnp 00:0d: [io 0x0072-0x0077]
[ 0.394355] pnp 00:0d: [io 0x0090-0x009f]
[ 0.394425] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.394436] pnp 00:0e: [io 0x0400-0x041f]
[ 0.394438] pnp 00:0e: [io 0x0420-0x043f]
[ 0.394440] pnp 00:0e: [io 0x0440-0x045f]
[ 0.394441] pnp 00:0e: [io 0x0460-0x047f]
[ 0.394446] pnp 00:0e: [io 0x0480-0x048f]
[ 0.394448] pnp 00:0e: [io 0xf800-0xf81f]
[ 0.394450] pnp 00:0e: [io 0xf820-0xf83f]
[ 0.394452] pnp 00:0e: [io 0xf840-0xf85f]
[ 0.394453] pnp 00:0e: [io 0xf860-0xf87f]
[ 0.394455] pnp 00:0e: [io 0xfa00-0xfa3f]
[ 0.394457] pnp 00:0e: [io 0xfc00-0xfc7f]
[ 0.394459] pnp 00:0e: [io 0xfc80-0xfcff]
[ 0.394460] pnp 00:0e: [io 0xfe00-0xfe7f]
[ 0.394462] pnp 00:0e: [io 0xfe80-0xfeff]
[ 0.394481] pnp 00:0e: disabling [io 0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.394485] pnp 00:0e: disabling [io 0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.394488] pnp 00:0e: disabling [io 0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.394491] pnp 00:0e: disabling [io 0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.394543] system 00:0e: [io 0x0400-0x041f] has been reserved
[ 0.394546] system 00:0e: [io 0x0420-0x043f] has been reserved
[ 0.394548] system 00:0e: [io 0x0440-0x045f] has been reserved
[ 0.394551] system 00:0e: [io 0x0460-0x047f] has been reserved
[ 0.394553] system 00:0e: [io 0x0480-0x048f] has been reserved
[ 0.394556] system 00:0e: [io 0xfa00-0xfa3f] has been reserved
[ 0.394558] system 00:0e: [io 0xfc00-0xfc7f] has been reserved
[ 0.394561] system 00:0e: [io 0xfc80-0xfcff] has been reserved
[ 0.394563] system 00:0e: [io 0xfe00-0xfe7f] has been reserved
[ 0.394566] system 00:0e: [io 0xfe80-0xfeff] has been reserved
[ 0.394569] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.394588] pnp 00:0f: [io 0x04d0-0x04d1]
[ 0.394647] system 00:0f: [io 0x04d0-0x04d1] has been reserved
[ 0.394651] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.424056] pnp 00:10: [mem 0x00000000-0x0009ffff]
[ 0.424059] pnp 00:10: [mem 0x00100000-0xdfffffff]
[ 0.424061] pnp 00:10: [mem 0x000e4000-0x000fffff]
[ 0.424064] pnp 00:10: [mem 0xfec01000-0xfecfffff]
[ 0.424066] pnp 00:10: [mem 0xfed00400-0xfed3ffff]
[ 0.424068] pnp 00:10: [mem 0xfed45000-0xffffffff]
[ 0.424070] pnp 00:10: [mem 0xf4000000-0xf7ffffff]
[ 0.424072] pnp 00:10: [mem 0x000d0600-0x000e3fff]
[ 0.424203] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.424207] system 00:10: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.424210] system 00:10: [mem 0x000e4000-0x000fffff] could not be reserved
[ 0.424213] system 00:10: [mem 0xfec01000-0xfecfffff] has been reserved
[ 0.424216] system 00:10: [mem 0xfed00400-0xfed3ffff] has been reserved
[ 0.424219] system 00:10: [mem 0xfed45000-0xffffffff] has been reserved
[ 0.424221] system 00:10: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.424224] system 00:10: [mem 0x000d0600-0x000e3fff] has been reserved
[ 0.424229] system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.424250] pnp: PnP ACPI: found 17 devices
[ 0.424252] ACPI: ACPI bus type pnp unregistered
[ 0.430593] PCI: max bus depth: 1 pci_try_num: 2
[ 0.430633] pci 0000:00:1c.1: BAR 14: assigned [mem 0xf3200000-0xf33fffff]
[ 0.430638] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf3400000-0xf35fffff 64bit pref]
[ 0.430642] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.430645] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf3600000-0xf37fffff]
[ 0.430648] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf3800000-0xf39fffff 64bit pref]
[ 0.430651] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.430656] pci 0000:01:00.0: BAR 6: assigned [mem 0xf3080000-0xf30fffff pref]
[ 0.430658] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.430661] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 0.430664] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf30fffff]
[ 0.430668] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.430672] pci 0000:00:1c.0: PCI bridge to [bus 20-20]
[ 0.430674] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.430679] pci 0000:00:1c.0: bridge window [mem 0xf3600000-0xf37fffff]
[ 0.430683] pci 0000:00:1c.0: bridge window [mem 0xf3800000-0xf39fffff 64bit pref]
[ 0.430689] pci 0000:00:1c.1: PCI bridge to [bus 30-30]
[ 0.430692] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.430697] pci 0000:00:1c.1: bridge window [mem 0xf3200000-0xf33fffff]
[ 0.430701] pci 0000:00:1c.1: bridge window [mem 0xf3400000-0xf35fffff 64bit pref]
[ 0.430708] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
[ 0.430735] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.430740] pci 0000:00:01.0: setting latency timer to 64
[ 0.430747] pci 0000:00:1c.0: setting latency timer to 64
[ 0.430756] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.430760] pci 0000:00:1c.1: setting latency timer to 64
[ 0.430766] pci 0000:00:1e.0: setting latency timer to 64
[ 0.430770] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.430772] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.430774] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.430777] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf30fffff]
[ 0.430780] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.430784] pci_bus 0000:20: resource 0 [io 0x4000-0x4fff]
[ 0.430787] pci_bus 0000:20: resource 1 [mem 0xf3600000-0xf37fffff]
[ 0.430790] pci_bus 0000:20: resource 2 [mem 0xf3800000-0xf39fffff 64bit pref]
[ 0.430793] pci_bus 0000:30: resource 0 [io 0x3000-0x3fff]
[ 0.430796] pci_bus 0000:30: resource 1 [mem 0xf3200000-0xf33fffff]
[ 0.430799] pci_bus 0000:30: resource 2 [mem 0xf3400000-0xf35fffff 64bit pref]
[ 0.430802] pci_bus 0000:07: resource 4 [io 0x0000-0xffff]
[ 0.430805] pci_bus 0000:07: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.430862] NET: Registered protocol family 2
[ 0.431080] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.433117] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.441445] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.442482] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.442486] TCP reno registered
[ 0.442516] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.442651] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.442925] NET: Registered protocol family 1
[ 0.442972] pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.442989] pci 0000:00:1a.0: PCI INT A disabled
[ 0.442997] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.443012] pci 0000:00:1a.1: PCI INT B disabled
[ 0.443023] pci 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.443059] pci 0000:00:1a.7: PCI INT C disabled
[ 0.443073] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.443088] pci 0000:00:1d.0: PCI INT A disabled
[ 0.443095] pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.443111] pci 0000:00:1d.1: PCI INT B disabled
[ 0.443121] pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.443139] pci 0000:00:1d.2: PCI INT C disabled
[ 0.443150] pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.443166] pci 0000:00:1d.7: PCI INT A disabled
[ 0.443190] pci 0000:01:00.0: Boot video device
[ 0.443200] PCI: CLS 64 bytes, default 64
[ 0.443209] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.443211] Placing 64MB software IO TLB between ffff8800dafab000 - ffff8800defab000
[ 0.443213] software IO TLB at phys 0xdafab000 - 0xdefab000
[ 0.443574] audit: initializing netlink socket (disabled)
[ 0.443585] type=2000 audit(1377210506.436:1): initialized
[ 0.464936] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.467547] VFS: Disk quotas dquot_6.5.2
[ 0.467610] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.468156] fuse init (API version 7.17)
[ 0.468249] msgmni has been set to 11733
[ 0.468576] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.468603] io scheduler noop registered
[ 0.468605] io scheduler deadline registered
[ 0.468638] io scheduler cfq registered (default)
[ 0.468756] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.468788] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.468839] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.468874] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.468929] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.468962] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.469040] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.469059] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.469119] intel_idle: MWAIT substates: 0x220
[ 0.469121] intel_idle: does not run on family 6 model 15
[ 0.469219] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.469228] ACPI: Power Button [PBTN]
[ 0.469279] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.469282] ACPI: Power Button [PWRF]
[ 0.470636] ERST: Table is not found!
[ 0.470638] GHES: HEST is not enabled!
[ 0.491108] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.550456] Freeing initrd memory: 20628k freed
[ 0.652496] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.652639] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.672717] 0000:00:03.3: ttyS4 at I/O 0x2240 (irq = 17) is a 16550A
[ 0.673030] Linux agpgart interface v0.103
[ 0.674625] brd: module loaded
[ 0.675399] loop: module loaded
[ 0.675586] ata_piix 0000:00:1f.2: version 2.13
[ 0.675604] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 0.675609] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.828034] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.828366] scsi0 : ata_piix
[ 0.828446] scsi1 : ata_piix
[ 0.828578] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x21f0 irq 14
[ 0.828583] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x21f8 irq 15
[ 0.828603] ata_piix 0000:00:1f.5: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 0.828607] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.828649] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.828864] scsi2 : ata_piix
[ 0.828933] scsi3 : ata_piix
[ 0.829036] ata3: SATA max UDMA/133 cmd 0x2258 ctl 0x2278 bmdma 0x2210 irq 18
[ 0.829040] ata4: SATA max UDMA/133 cmd 0x2260 ctl 0x227c bmdma 0x2218 irq 18
[ 0.829099] pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.829123] pata_acpi 0000:00:03.2: setting latency timer to 64
[ 0.829133] pata_acpi 0000:00:03.2: PCI INT C disabled
[ 0.829160] ata_generic 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.829174] ata_generic 0000:00:03.2: setting latency timer to 64
[ 0.829453] scsi4 : ata_generic
[ 0.829520] scsi5 : ata_generic
[ 0.829565] ata5: PATA max UDMA/100 cmd 0x2230 ctl 0x2268 bmdma 0x21e0 irq 18
[ 0.829568] ata6: PATA max UDMA/100 cmd 0x2238 ctl 0x226c bmdma 0x21e8 irq 18
[ 0.829880] Fixed MDIO Bus: probed
[ 0.829900] tun: Universal TUN/TAP device driver, 1.6
[ 0.829902] tun: (C) 1999-2004 Max Krasnyansky
[ 0.829993] PPP generic driver version 2.4.2
[ 0.830095] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.830111] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.830132] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.830135] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.830174] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.830201] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.834068] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.834082] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf3126000
[ 0.848020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.848170] hub 1-0:1.0: USB hub found
[ 0.848175] hub 1-0:1.0: 4 ports detected
[ 0.848255] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.848266] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.848269] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.848309] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.848334] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.852230] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.852244] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf3126400
[ 0.868028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.868148] hub 2-0:1.0: USB hub found
[ 0.868153] hub 2-0:1.0: 6 ports detected
[ 0.868238] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.868251] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.868269] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.868275] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.868278] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.868320] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.868341] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00002120
[ 0.868464] hub 3-0:1.0: USB hub found
[ 0.868468] hub 3-0:1.0: 2 ports detected
[ 0.868531] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.868537] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.868540] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.868588] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.868618] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002140
[ 0.868742] hub 4-0:1.0: USB hub found
[ 0.868746] hub 4-0:1.0: 2 ports detected
[ 0.868807] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.868814] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.868817] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.868854] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.868875] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002160
[ 0.868994] hub 5-0:1.0: USB hub found
[ 0.868998] hub 5-0:1.0: 2 ports detected
[ 0.869059] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.869065] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.869068] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.869110] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.869131] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00002180
[ 0.869249] hub 6-0:1.0: USB hub found
[ 0.869253] hub 6-0:1.0: 2 ports detected
[ 0.869314] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.869320] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.869323] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.869363] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.869384] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000021a0
[ 0.869503] hub 7-0:1.0: USB hub found
[ 0.869507] hub 7-0:1.0: 2 ports detected
[ 0.869618] usbcore: registered new interface driver libusual
[ 0.869664] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 0.872467] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.872474] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.872598] mousedev: PS/2 mouse device common for all mice
[ 0.872743] rtc_cmos 00:03: RTC can wake from S4
[ 0.872843] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.872865] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.872944] device-mapper: uevent: version 1.0.3
[ 0.873012] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.873021] cpuidle: using governor ladder
[ 0.873022] cpuidle: using governor menu
[ 0.873024] EFI Variables Facility v0.08 2004-May-17
[ 0.873252] TCP cubic registered
[ 0.873361] NET: Registered protocol family 10
[ 0.873804] NET: Registered protocol family 17
[ 0.873809] Registering the dns_resolver key type
[ 0.873924] PM: Hibernation image not present or could not be loaded.
[ 0.873936] registered taskstats version 1
[ 0.880394] Magic number: 9:925:502
[ 0.880506] rtc_cmos 00:03: setting system clock to 2013-08-22 22:28:28 UTC (1377210508)
[ 0.890638] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.960165] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.960168] EDD information not available.
[ 1.180024] usb 2-3: new high-speed USB device number 2 using ehci_hcd
[ 1.304055] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.313960] hub 2-3:1.0: USB hub found
[ 1.314299] hub 2-3:1.0: 4 ports detected
[ 1.328297] ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133
[ 1.328301] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.344295] ata3.00: configured for UDMA/133
[ 1.360052] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.384392] ata4.00: ATA-7: Hitachi HDT725032VLAT80, V54OA42A, max UDMA/133
[ 1.384396] ata4.00: 625142448 sectors, multi 16: LBA48
[ 1.400390] ata4.00: configured for UDMA/133
[ 1.440023] Refined TSC clocksource calibration: 2327.499 MHz.
[ 1.440028] Switching to clocksource tsc
[ 1.584302] usb 2-3.1: new high-speed USB device number 3 using ehci_hcd
[ 1.624065] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.624076] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.624187] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.624205] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.624215] ata2.01: link offline, clearing class 3 to NONE
[ 1.632207] ata2.00: ATAPI: HL-DT-ST DVD-RAM GH15L, RA02, max UDMA/100
[ 1.632267] ata1.00: ATA-8: WDC WD1600AAJS-60M0A0, 02.03E02, max UDMA/100
[ 1.632270] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.648193] ata2.00: configured for UDMA/100
[ 1.648241] ata1.00: configured for UDMA/100
[ 1.648344] scsi 0:0:0:0: Direct-Access ATA WDC WD1600AAJS-6 02.0 PQ: 0 ANSI: 5
[ 1.648460] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.648475] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.648507] sd 0:0:0:0: [sda] Write Protect is off
[ 1.648510] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.648538] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.678677] sda: sda1 sda3
[ 1.678923] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.748303] usb 2-3.2: new high-speed USB device number 4 using ehci_hcd
[ 1.764675] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH15L RA02 PQ: 0 ANSI: 5
[ 1.842673] Initializing USB Mass Storage driver...
[ 1.842768] scsi6 : usb-storage 2-3.2:1.0
[ 1.842827] usbcore: registered new interface driver usb-storage
[ 1.842829] USB Mass Storage support registered.
[ 1.873462] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.873466] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.873583] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.873696] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.873805] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
[ 1.873901] sd 2:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.873923] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.873949] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.873952] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.873979] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.874008] scsi 3:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 1.874102] sd 3:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.874123] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.874147] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.874150] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.874179] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.910956] sdb: sdb1 sdb2 sdb3
[ 1.911254] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.912301] usb 2-3.3: new high-speed USB device number 5 using ehci_hcd
[ 1.922498] sdc: sdc1 sdc2 < sdc5 > sdc4
[ 1.922823] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.005392] scsi7 : usb-storage 2-3.3:1.0
[ 2.039890] Freeing unused kernel memory: 924k freed
[ 2.040168] Write protecting the kernel read-only data: 12288k
[ 2.045436] Freeing unused kernel memory: 1592k freed
[ 2.049788] Freeing unused kernel memory: 1188k freed
[ 2.065970] udevd[105]: starting version 175
[ 2.076314] usb 2-3.4: new high-speed USB device number 6 using ehci_hcd
[ 2.114702] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 2.114705] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 2.114747] e1000e 0000:00:19.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.114756] e1000e 0000:00:19.0: setting latency timer to 64
[ 2.114857] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 2.170127] FDC 0 is a post-1991 82077
[ 2.171960] scsi8 : usb-storage 2-3.4:1.0
[ 2.418233] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:0f:fe:ec:95:ed
[ 2.418237] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.418260] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: 1062FF-0FF
[ 2.842319] scsi 6:0:0:0: Direct-Access WD Ext HDD 1021 2021 PQ: 0 ANSI: 4
[ 2.842854] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 2.843938] sd 6:0:0:0: [sdd] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.845679] sd 6:0:0:0: [sdd] Write Protect is off
[ 2.845683] sd 6:0:0:0: [sdd] Mode Sense: 17 00 10 08
[ 2.847429] sd 6:0:0:0: [sdd] No Caching mode page present
[ 2.847432] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2.851804] sd 6:0:0:0: [sdd] No Caching mode page present
[ 2.851807] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 3.004689] scsi 7:0:0:0: Direct-Access Seagate Desktop 0130 PQ: 0 ANSI: 4
[ 3.005151] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 3.006309] sd 7:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.006930] sd 7:0:0:0: [sde] Write Protect is off
[ 3.006933] sd 7:0:0:0: [sde] Mode Sense: 2f 08 00 00
[ 3.007553] sd 7:0:0:0: [sde] No Caching mode page present
[ 3.007556] sd 7:0:0:0: [sde] Assuming drive cache: write through
[ 3.009554] sd 7:0:0:0: [sde] No Caching mode page present
[ 3.009557] sd 7:0:0:0: [sde] Assuming drive cache: write through
[ 3.027445] sde: sde1
[ 3.030055] sd 7:0:0:0: [sde] No Caching mode page present
[ 3.030058] sd 7:0:0:0: [sde] Assuming drive cache: write through
[ 3.030061] sd 7:0:0:0: [sde] Attached SCSI disk
[ 3.172692] scsi 8:0:0:0: Direct-Access Hitachi HDT721075SLA380 PQ: 0 ANSI: 2 CCS
[ 3.173183] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 3.174434] sd 8:0:0:0: [sdf] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 3.175305] sd 8:0:0:0: [sdf] Write Protect is off
[ 3.175309] sd 8:0:0:0: [sdf] Mode Sense: 34 00 00 00
[ 3.176181] sd 8:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.194694] sdf: sdf1
[ 3.197556] sd 8:0:0:0: [sdf] Attached SCSI disk
[ 3.272949] sdd: sdd1
[ 3.288434] sd 6:0:0:0: [sdd] No Caching mode page present
[ 3.288438] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 3.288441] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 8.706091] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 24.889666] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.948108] udevd[408]: starting version 175
[ 25.130730] type=1400 audit(1377210532.746:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=613 comm="apparmor_parser"
[ 25.131108] type=1400 audit(1377210532.746:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=613 comm="apparmor_parser"
[ 25.131318] type=1400 audit(1377210532.746:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=613 comm="apparmor_parser"
[ 25.133031] lp: driver loaded but no devices found
[ 25.267528] parport_pc 00:07: reported by Plug and Play ACPI
[ 25.267554] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 25.373537] lp0: using parport0 (interrupt-driven).
[ 25.488262] tpm_tis 00:0b: 1.2 TPM (device-id 0xB, rev-id 16)
[ 25.628269] ppdev: user-space parallel port driver
[ 25.631619] wmi: Mapper loaded
[ 25.704386] cfg80211: Calling CRDA to update world regulatory domain
[ 25.710863] cfg80211: World regulatory domain updated:
[ 25.710866] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 25.710869] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.710872] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 25.710874] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 25.710877] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.710879] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.861873] input: HP WMI hotkeys as /devices/virtual/input/input3
[ 25.863063] rtl8192cu: MAC address: 08:10:76:99:0b:f7
[ 25.863067] rtl8192cu: Board Type 0
[ 25.904181] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 25.904188] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 25.904191] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 25.904193] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 25.904196] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 25.904198] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 25.904201] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 25.904203] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 25.904206] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 25.904208] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 25.904211] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 25.904213] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 25.904216] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 25.904218] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 25.904221] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 25.904223] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 25.904226] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 25.904228] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 25.904230] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 25.904233] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 25.904235] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 25.904237] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 25.904240] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 25.904242] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 25.904245] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 25.904247] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 25.904318] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 25.921932] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 25.922245] mei 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 25.922250] mei 0000:00:03.0: setting latency timer to 64
[ 25.922294] mei 0000:00:03.0: irq 44 for MSI/MSI-X
[ 26.025602] nvidia: module license 'NVIDIA' taints kernel.
[ 26.025606] Disabling lock debugging due to kernel taint
[ 26.069695] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 26.070220] usbcore: registered new interface driver rtl8192cu
[ 26.160061] tpm_tis 00:0b: Adjusting TPM timeout parameters.
[ 26.260659] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 26.260667] nvidia 0000:01:00.0: setting latency timer to 64
[ 26.260673] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 26.260865] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
[ 26.280504] udevd[486]: renamed network interface wlan0 to wlan2
[ 26.418749] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 26.494079] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 26.494131] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 26.494155] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 26.908279] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 26.908283] hda_intel: Disabling MSI
[ 26.908323] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 27.736064] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 27.760108] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 27.777423] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
[ 27.784110] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 27.808022] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 27.808125] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
[ 27.808226] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[ 27.808324] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[ 27.808419] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[ 28.187452] Adding 3145724k swap on /media/fasthdd/swapfile.img. Priority:-1 extents:14 across:5185536k
[ 28.213217] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null)
[ 28.662370] init: udev-fallback-graphics main process (1106) terminated with status 1
[ 29.478410] init: Failed to spawn samba4 main process: unable to execute: No such file or directory
[ 29.514831] init: failsafe main process (1135) killed by TERM signal
[ 29.622521] type=1400 audit(1377210537.238:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1195 comm="apparmor_parser"
[ 29.624099] type=1400 audit(1377210537.242:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1195 comm="apparmor_parser"
[ 29.660389] type=1400 audit(1377210537.278:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1228 comm="apparmor_parser"
[ 29.660763] type=1400 audit(1377210537.278:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1228 comm="apparmor_parser"
[ 29.660975] type=1400 audit(1377210537.278:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1228 comm="apparmor_parser"
[ 29.661193] type=1400 audit(1377210537.278:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1230 comm="apparmor_parser"
[ 29.661657] type=1400 audit(1377210537.278:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1230 comm="apparmor_parser"
[ 29.687442] Bluetooth: Core ver 2.16
[ 29.687466] NET: Registered protocol family 31
[ 29.687468] Bluetooth: HCI device and connection manager initialized
[ 29.687471] Bluetooth: HCI socket layer initialized
[ 29.687473] Bluetooth: L2CAP socket layer initialized
[ 29.687478] Bluetooth: SCO socket layer initialized
[ 29.726226] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.726229] Bluetooth: BNEP filters: protocol multicast
[ 29.771992] Bluetooth: RFCOMM TTY layer initialized
[ 29.771997] Bluetooth: RFCOMM socket layer initialized
[ 29.771999] Bluetooth: RFCOMM ver 1.11
[ 30.180232] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 30.236078] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 30.237107] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.237588] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.239524] ADDRCONF(NETDEV_UP): wlan2: link is not ready
[ 30.794471] vboxdrv: Found 2 processor cores.
[ 30.795181] vboxdrv: fAsync=0 offMin=0x237 offMax=0xc63
[ 30.795955] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 30.795958] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
[ 30.861619] vboxpci: IOMMU not found (not registered)
[ 31.584858] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 31.584864] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 31.585658] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 31.886953] init: plymouth-upstart-bridge main process (1152) killed by TERM signal
[ 34.354580] init: mediatomb main process (2003) terminated with status 1
[ 34.354606] init: mediatomb main process ended, respawning
[ 34.380247] init: mediatomb main process (2016) terminated with status 1
[ 34.380278] init: mediatomb main process ended, respawning
[ 34.414416] init: mediatomb main process (2024) terminated with status 1
[ 34.414443] init: mediatomb main process ended, respawning
[ 34.454815] init: mediatomb main process (2032) terminated with status 1
[ 34.454845] init: mediatomb main process ended, respawning
[ 34.490163] init: mediatomb main process (2040) terminated with status 1
[ 34.490189] init: mediatomb main process ended, respawning
[ 34.515434] init: mediatomb main process (2053) terminated with status 1
[ 34.515466] init: mediatomb main process ended, respawning
[ 34.537602] init: mediatomb main process (2055) terminated with status 1
[ 34.537627] init: mediatomb main process ended, respawning
[ 34.563247] init: mediatomb main process (2058) terminated with status 1
[ 34.563272] init: mediatomb main process ended, respawning
[ 34.592213] init: mediatomb main process (2060) terminated with status 1
[ 34.592243] init: mediatomb main process ended, respawning
[ 34.615627] init: mediatomb main process (2062) terminated with status 1
[ 34.615653] init: mediatomb main process ended, respawning
[ 34.639310] init: mediatomb main process (2064) terminated with status 1
[ 34.639339] init: mediatomb respawning too fast, stopped
[ 41.888018] eth0: no IPv6 routers present