dmesg - glmark1

Return To glmark1 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.9.2 (root@phenom) (gcc version 4.7.3 (Debian 4.7.3-4) ) #5 SMP PREEMPT Mon Jul 22 21:53:22 CEST 2013
KERNEL supported cpus:
  AMD AuthenticAMD
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009afff] usable
BIOS-e820: [mem 0x000000000009b000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfe8ffff] usable
BIOS-e820: [mem 0x00000000cfe90000-0x00000000cfea7fff] ACPI data
BIOS-e820: [mem 0x00000000cfea8000-0x00000000cfecffff] ACPI NVS
BIOS-e820: [mem 0x00000000cfed0000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: System manufacturer System Product Name/M4A89GTD-PRO/USB3, BIOS 2301    07/18/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
Base memory trampoline at [ffff880000095000] 95000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x019ca000, 0x019cafff] PGTABLE
BRK [0x019cb000, 0x019cbfff] PGTABLE
BRK [0x019cc000, 0x019ccfff] PGTABLE
init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
 [mem 0x12fe00000-0x12fffffff] page 2M
BRK [0x019cd000, 0x019cdfff] PGTABLE
init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
 [mem 0x12c000000-0x12fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x12bffffff]
 [mem 0x100000000-0x12bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcfe8ffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0xbfffffff] page 1G
 [mem 0xc0000000-0xcfdfffff] page 2M
 [mem 0xcfe00000-0xcfe8ffff] page 4k
RAMDISK: [mem 0x37a5e000-0x37d26fff]
ACPI: RSDP 00000000000fba90 00024 (v02 ACPIAM)
ACPI: XSDT 00000000cfe90100 0005C (v01 071811 XSDT1208 20110718 MSFT 00000097)
ACPI: FACP 00000000cfe90290 000F4 (v03 071811 FACP1208 20110718 MSFT 00000097)
ACPI: DSDT 00000000cfe90450 0E793 (v01  A1608 A1608000 00000000 INTL 20060113)
ACPI: FACS 00000000cfea8000 00040
ACPI: APIC 00000000cfe90390 0007C (v01 071811 APIC1208 20110718 MSFT 00000097)
ACPI: MCFG 00000000cfe90410 0003C (v01 071811 OEMMCFG  20110718 MSFT 00000097)
ACPI: OEMB 00000000cfea8040 00072 (v01 071811 OEMB1208 20110718 MSFT 00000097)
ACPI: SRAT 00000000cfe9f8a0 00108 (v01 AMD    FAM_F_10 00000002 AMD  00000001)
ACPI: HPET 00000000cfe9f9b0 00038 (v01 071811 OEMHPET  20110718 MSFT 00000097)
ACPI: SSDT 00000000cfe9f9f0 00DA4 (v01 A M I  POWERNOW 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x12fffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff]
NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x12fffffff] -> [mem 0x00000000-0x12fffffff]
Initmem setup node 0 [mem 0x00000000-0x12fffffff]
  NODE_DATA [mem 0x12fffa000-0x12fffdfff]
 [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x12fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009afff]
  node   0: [mem 0x00100000-0xcfe8ffff]
  node   0: [mem 0x100000000-0x12fffffff]
On node 0 totalpages: 1048106
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3994 pages, LIFO batch:0
  DMA32 zone: 13243 pages used for memmap
  DMA32 zone: 847504 pages, LIFO batch:31
  Normal zone: 3072 pages used for memmap
  Normal zone: 196608 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 6 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
e820: [mem 0xcff00000-0xffdfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:6 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88012fc00000 s78656 r8192 d23744 u262144
pcpu-alloc: s78656 r8192 d23744 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - - 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031706
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Node 0: aperture @ ef76000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
Memory: 3981572k/4980736k available (5044k kernel code, 788312k absent, 210852k reserved, 3614k data, 816k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:728 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2809.360 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5618.72 BogoMIPS (lpj=2809360)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys net_prio
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20130117
ACPI: All ACPI Tables successfully acquired
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X6 1055T Processor (fam: 10, model: 0a, stepping: 00)
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
process: System has AMD C1E enabled
process: Switch to broadcast mode on CPU0
MCE: In-kernel MCE decoding enabled.
process: Switch to broadcast mode on CPU1
process: Switch to broadcast mode on CPU2
process: Switch to broadcast mode on CPU3
process: Switch to broadcast mode on CPU4
smpboot: Booting Node   0, Processors  #1 #2 #3 #4 #5 OK
Brought up 6 CPUs
process: Switch to broadcast mode on CPU5
smpboot: Total of 6 processors activated (33712.32 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xcfea8000-0xcfecffff] (163840 bytes)
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffdfffff]
TOM2: 0000000130000000 aka 4864M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io  0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x130000000-0xfcffffffff]
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
pci 0000:00:03.0: [1022:960b] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io  0x9000-0x9007]
pci 0000:00:11.0: reg 14: [io  0x8000-0x8003]
pci 0000:00:11.0: reg 18: [io  0x7000-0x7007]
pci 0000:00:11.0: reg 1c: [io  0x6000-0x6003]
pci 0000:00:11.0: reg 20: [io  0x5000-0x500f]
pci 0000:00:11.0: reg 24: [mem 0xfe4ffc00-0xfe4fffff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfe4fe000-0xfe4fefff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfe4ff800-0xfe4ff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfe4fd000-0xfe4fdfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfe4ff400-0xfe4ff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfe4f4000-0xfe4f7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfe4fc000-0xfe4fcfff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 10: [mem 0xfe4f3000-0xfe4f3fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 10: [mem 0xfe4ff000-0xfe4ff0ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [1002:9442] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe5f0000-0xfe5fffff 64bit]
pci 0000:01:00.0: reg 20: [io  0xa000-0xa0ff]
pci 0000:01:00.0: reg 30: [mem 0xfe5c0000-0xfe5dffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa30] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfe5ec000-0xfe5effff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:03.0:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:02:00.0: reg 10: [mem 0xfe6fe000-0xfe6fffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0:   bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:03:00.0: [197b:2361] type 00 class 0x010185
pci 0000:03:00.0: reg 24: [mem 0xfe7fe000-0xfe7fffff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.1: [197b:2361] type 00 class 0x010185
pci 0000:03:00.1: reg 10: [io  0xbc00-0xbc07]
pci 0000:03:00.1: reg 14: [io  0xb880-0xb883]
pci 0000:03:00.1: reg 18: [io  0xb800-0xb807]
pci 0000:03:00.1: reg 1c: [io  0xb480-0xb483]
pci 0000:03:00.1: reg 20: [io  0xb400-0xb40f]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:0a.0:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:04:05.0: [1412:1712] type 00 class 0x040100
pci 0000:04:05.0: reg 10: [io  0xdc00-0xdc1f]
pci 0000:04:05.0: reg 14: [io  0xd880-0xd88f]
pci 0000:04:05.0: reg 18: [io  0xd800-0xd80f]
pci 0000:04:05.0: reg 1c: [io  0xd480-0xd4bf]
pci 0000:04:05.0: supports D2
pci 0000:04:06.0: [1412:1712] type 00 class 0x040100
pci 0000:04:06.0: reg 10: [io  0xd400-0xd41f]
pci 0000:04:06.0: reg 14: [io  0xd080-0xd08f]
pci 0000:04:06.0: reg 18: [io  0xd000-0xd00f]
pci 0000:04:06.0: reg 1c: [io  0xcc00-0xcc3f]
pci 0000:04:06.0: supports D2
pci 0000:04:07.0: [1106:3044] type 00 class 0x0c0010
pci 0000:04:07.0: reg 10: [mem 0xfe8ff800-0xfe8fffff]
pci 0000:04:07.0: reg 14: [io  0xc880-0xc8ff]
pci 0000:04:07.0: supports D2
pci 0000:04:07.0: PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xc000-0xdfff]
pci 0000:00:14.4:   bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 10: [io  0xe800-0xe8ff]
pci 0000:05:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
pci 0000:05:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:15.0:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:15.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A03:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled.
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfe90000-0xcfffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
FS-Cache: Loaded
CacheFiles: Loaded
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x040b] has been reserved
system 00:08: [io  0x04d6] has been reserved
system 00:08: [io  0x0c00-0x0c01] has been reserved
system 00:08: [io  0x0c14] has been reserved
system 00:08: [io  0x0c50-0x0c51] has been reserved
system 00:08: [io  0x0c52] has been reserved
system 00:08: [io  0x0c6c] has been reserved
system 00:08: [io  0x0c6f] has been reserved
system 00:08: [io  0x0cd0-0x0cd1] has been reserved
system 00:08: [io  0x0cd2-0x0cd3] has been reserved
system 00:08: [io  0x0cd4-0x0cd5] has been reserved
system 00:08: [io  0x0cd6-0x0cd7] has been reserved
system 00:08: [io  0x0cd8-0x0cdf] has been reserved
system 00:08: [io  0x0800-0x089f] has been reserved
system 00:08: [io  0x0b00-0x0b1f] has been reserved
system 00:08: [io  0x0b20-0x0b3f] has been reserved
system 00:08: [io  0x0900-0x090f] has been reserved
system 00:08: [io  0x0910-0x091f] has been reserved
system 00:08: [io  0xfe00-0xfefe] has been reserved
system 00:08: [mem 0xcff00000-0xcfffffff] has been reserved
system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io  0x0230-0x023f] has been reserved
system 00:09: [io  0x0290-0x029f] has been reserved
system 00:09: [io  0x0f40-0x0f4f] has been reserved
system 00:09: [io  0x0a30-0x0a3f] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0xcfefffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:03.0:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0:   bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:0a.0:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci 0000:00:14.4:   bridge window [io  0xc000-0xdfff]
pci 0000:00:14.4:   bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:15.0:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:15.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:04: resource 0 [io  0xc000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:05: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 2852k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
microcode: CPU0: patch_level=0x010000bf
microcode: CPU1: patch_level=0x010000bf
microcode: CPU2: patch_level=0x010000bf
microcode: CPU3: patch_level=0x010000bf
microcode: CPU4: patch_level=0x010000bf
microcode: CPU5: patch_level=0x010000bf
microcode: Microcode Update Driver: v2.00 , Peter Oruba
sha1_ssse3: Neither AVX nor SSSE3 is available/usable.
fuse init (API version 7.21)
msgmni has been set to 7910
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:03.0: irq 40 for MSI/MSI-X
pcieport 0000:00:09.0: irq 41 for MSI/MSI-X
pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
pcieport 0000:00:15.0: irq 43 for MSI/MSI-X
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: processor limited to max C-state 1
XENFS: not registering filesystem on non-xen platform
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 44 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4ffd00 irq 44
ata2: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4ffd80 irq 44
ata3: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4ffe00 irq 44
ata4: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4ffe80 irq 44
ata5: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4fff00 irq 44
ata6: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4fff80 irq 44
ahci 0000:03:00.0: JMB361 has only one port
ahci 0000:03:00.0: forcing port_map 0x3 -> 0x1
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfe7fe000 port 0xfe7fe100 irq 18
ata8: DUMMY
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:03:00.1: setting latency timer to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
ata10: PATA max UDMA/100 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: irq 45 for MSI/MSI-X
r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc90000650000, 48:5b:39:02:5f:44, XID 0c100000 IRQ 45
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
firewire_ohci 0000:04:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe4ff800
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.9.2 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfe4ff400
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.9.2 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfe4ff000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.9.2 ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe4fe000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.9.2 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe4fd000
ata9.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL01, max UDMA/66
ata9.00: configured for UDMA/66
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.9.2 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe4fc000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.9.2 ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe4f3000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.9.2 ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 52 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.9.2 xhci_hcd
usb usb8: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.9.2 xhci_hcd
usb usb9: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input2
ata3: SATA link down (SStatus 0 SControl 300)
rtc_cmos 00:02: RTC can wake from S4
ata6: SATA link down (SStatus 0 SControl 300)
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ata4: SATA link down (SStatus 0 SControl 300)
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20130117/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ATK0110 ATK0110:00: EC enabled
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
cpuidle: using governor ladder
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered protocol family 26
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
registered taskstats version 1
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ100E5, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD103SJ  1AJ1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 8:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H42N  RL01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 8:0:0:0: Attached scsi CD-ROM sr0
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
firewire_core 0000:04:07.0: created device fw0: GUID 001e8c0000cb0f30, S400
Freeing unused kernel memory: 816k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1088k freed
Freeing unused kernel memory: 576k freed
udevd[103]: starting version 175
usb 4-3: new low-speed USB device number 2 using ohci_hcd
usb 4-3: New USB device found, idVendor=413c, idProduct=2003
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: Dell USB Keyboard
usb 4-3: Manufacturer: Dell
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input3
hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:12.0-3/input0
tsc: Refined TSC clocksource calibration: 2809.433 MHz
Switching to clocksource tsc
usb 4-4: new low-speed USB device number 3 using ohci_hcd
usb 4-4: New USB device found, idVendor=046d, idProduct=c062
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-4: Product: USB Laser Mouse
usb 4-4: Manufacturer: Logitech
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input4
hid-generic 0003:046D:C062.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:12.0-4/input0
microcode: CPU0: new patch_level=0x010000dc
microcode: CPU1: new patch_level=0x010000dc
microcode: CPU2: new patch_level=0x010000dc
microcode: CPU3: new patch_level=0x010000dc
microcode: CPU4: new patch_level=0x010000dc
microcode: CPU5: new patch_level=0x010000dc
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda3): mounted filesystem with writeback data mode
udevd[383]: starting version 175
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
Linux agpgart interface v0.103
acpi-cpufreq: overriding BIOS provided _PSD data
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RV770 0x1002:0x9442 0x1458:0x21B8).
[drm] register mmio base: 0xFE5F0000
[drm] register mmio size: 65536
ATOM BIOS: GV
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone  kernel: Available graphics memory: 2026438 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 53 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] probing gen 2 caps for device 1022:960b = 1300c82/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] Loading RV770 Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880126619c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880126619c0c
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DVI-I-1
[drm]   HPD1
[drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY
[drm]     CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm]   DIN-1
[drm]   Encoders:
[drm]     TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm]   DVI-I-2
[drm]   HPD2
[drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm]     DFP2: INTERNAL_KLDSCP_LVTMA
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.30.0 20080528 for 0000:01:00.0 on minor 0
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
snd_hda_intel 0000:01:00.1: irq 54 for MSI/MSI-X
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13
EXT3-fs (sda3): using internal journal
loop: module loaded
r8169 0000:05:00.0 eth0: link down
r8169 0000:05:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:05:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Return To glmark1 System Information