dmesg - test
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-34-generic (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #55~precise1-Ubuntu SMP Fri Jun 7 16:25:50 UTC 2013 (Ubuntu 3.5.0-34.55~precise1-generic 3.5.7.13)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.5.0-34-generic root=/dev/md0 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000099fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009a000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cb607fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb608000-0x00000000cb60efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cb60f000-0x00000000cba59fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cba5a000-0x00000000cbea7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cbea8000-0x00000000dd6ebfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd6ec000-0x00000000dd8f3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd8f4000-0x00000000dd908fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dd909000-0x00000000dde47fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dde48000-0x00000000deffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS All Series/SABERTOOTH Z87, BIOS 1007 05/17/2013
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x81f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D7FFF write-protect
[ 0.000000] D8000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7800000000 write-back
[ 0.000000] 1 base 0800000000 mask 7FF0000000 write-back
[ 0.000000] 2 base 0810000000 mask 7FF8000000 write-back
[ 0.000000] 3 base 0818000000 mask 7FFC000000 write-back
[ 0.000000] 4 base 081C000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 081E000000 mask 7FFF000000 write-back
[ 0.000000] 6 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 32GB, type WB
[ 0.000000] reg 1, base: 32GB, range: 256MB, type WB
[ 0.000000] reg 2, base: 33024MB, range: 128MB, type WB
[ 0.000000] reg 3, base: 33152MB, range: 64MB, type WB
[ 0.000000] reg 4, base: 33216MB, range: 32MB, type WB
[ 0.000000] reg 5, base: 33248MB, range: 16MB, type WB
[ 0.000000] reg 6, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 32752M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 5, base: 16GB, range: 16GB, type WB
[ 0.000000] reg 6, base: 32GB, range: 512MB, type WB
[ 0.000000] reg 7, base: 33264MB, range: 16MB, type UC
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7d0-0x000fd7df] mapped at [ffff8800000fd7d0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdeffffff]
[ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xdeffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xdeffffff @ [mem 0x1fffe000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x81effffff]
[ 0.000000] [mem 0x100000000-0x7ffffffff] page 1G
[ 0.000000] [mem 0x800000000-0x81effffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x81effffff @ [mem 0xdd6ea000-0xdd6ebfff]
[ 0.000000] RAMDISK: [mem 0x360fc000-0x37075fff]
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000dd8f8080 00074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000dd904640 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000dd8f8188 0C4B1 (v02 ALASKA A M I 00000024 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000dde46080 00040
[ 0.000000] ACPI: APIC 00000000dd904750 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000dd9047e8 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000dd904830 00539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000dd904d70 00AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 00000000dd905848 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dd905888 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000dd9058c0 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000dd905c30 0329E (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: BGRT 00000000dd908f28 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000081effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x81effffff]
[ 0.000000] NODE_DATA [mem 0x81effc000-0x81effffff]
[ 0.000000] [ffffea0000000000-ffffea00207fffff] PMD -> [ffff8807fe600000-ffff88081e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x81effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x00099fff]
[ 0.000000] node 0: [mem 0x00100000-0xcb607fff]
[ 0.000000] node 0: [mem 0xcb60f000-0xcba59fff]
[ 0.000000] node 0: [mem 0xcbea8000-0xdd6ebfff]
[ 0.000000] node 0: [mem 0xdefff000-0xdeffffff]
[ 0.000000] node 0: [mem 0x100000000-0x81effffff]
[ 0.000000] On node 0 totalpages: 8372770
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3908 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 885464 pages, LIFO batch:31
[ 0.000000] Normal zone: 116672 pages used for memmap
[ 0.000000] Normal zone: 7350336 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cb608000 - 00000000cb60f000
[ 0.000000] PM: Registered nosave memory: 00000000cba5a000 - 00000000cbea8000
[ 0.000000] PM: Registered nosave memory: 00000000dd6ec000 - 00000000dd8f4000
[ 0.000000] PM: Registered nosave memory: 00000000dd8f4000 - 00000000dd909000
[ 0.000000] PM: Registered nosave memory: 00000000dd909000 - 00000000dde48000
[ 0.000000] PM: Registered nosave memory: 00000000dde48000 - 00000000defff000
[ 0.000000] PM: Registered nosave memory: 00000000df000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88081ec00000 s83584 r8192 d22912 u262144
[ 0.000000] pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8239708
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.5.0-34-generic root=/dev/md0 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 32868120k/34062336k available (6821k kernel code, 571256k absent, 622960k reserved, 6346k data, 948k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 134217728 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 3497.982 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6995.96 BogoMIPS (lpj=13991928)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000016] Security Framework initialized
[ 0.000023] AppArmor: AppArmor initialized
[ 0.000024] Yama: becoming mindful.
[ 0.001226] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.004929] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.006473] Mount-cache hash table entries: 256
[ 0.006588] Initializing cgroup subsys cpuacct
[ 0.006590] Initializing cgroup subsys memory
[ 0.006594] Initializing cgroup subsys devices
[ 0.006595] Initializing cgroup subsys freezer
[ 0.006596] Initializing cgroup subsys blkio
[ 0.006597] Initializing cgroup subsys perf_event
[ 0.006613] CPU: Physical Processor ID: 0
[ 0.006614] CPU: Processor Core ID: 0
[ 0.006617] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.006617] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.007336] mce: CPU supports 9 MCE banks
[ 0.007346] CPU0: Thermal monitoring enabled (TM1)
[ 0.007353] using mwait in idle threads.
[ 0.008460] ACPI: Core revision 20120320
[ 0.014317] ftrace: allocating 27622 entries in 108 pages
[ 0.022543] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062128] CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz stepping 03
[ 0.166096] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
[ 0.166099] ... version: 3
[ 0.166100] ... bit width: 48
[ 0.166101] ... generic registers: 4
[ 0.166101] ... value mask: 0000ffffffffffff
[ 0.166102] ... max period: 000000007fffffff
[ 0.166103] ... fixed-purpose events: 3
[ 0.166103] ... event mask: 000000070000000f
[ 0.166186] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.166237] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
[ 0.263037] Brought up 8 CPUs
[ 0.263039] Total of 8 processors activated (55967.71 BogoMIPS).
[ 0.270036] devtmpfs: initialized
[ 0.271595] EVM: security.selinux
[ 0.271596] EVM: security.SMACK64
[ 0.271596] EVM: security.capability
[ 0.271616] PM: Registering ACPI NVS region [mem 0xcb608000-0xcb60efff] (28672 bytes)
[ 0.271617] PM: Registering ACPI NVS region [mem 0xdd909000-0xdde47fff] (5500928 bytes)
[ 0.272051] dummy:
[ 0.272075] RTC time: 8:04:11, date: 07/25/13
[ 0.272094] NET: Registered protocol family 16
[ 0.272144] Trying to unpack rootfs image as initramfs...
[ 0.272186] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.272187] ACPI: bus type pci registered
[ 0.272215] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.272216] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.276577] PCI: Using configuration type 1 for base access
[ 0.277209] bio: create slab at 0
[ 0.277248] ACPI: Added _OSI(Module Device)
[ 0.277250] ACPI: Added _OSI(Processor Device)
[ 0.277251] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.277252] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.278407] ACPI: EC: Look up EC in DSDT
[ 0.279579] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.281145] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.305811] ACPI: SSDT 00000000dd8e9c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.306105] ACPI: Dynamic OEM Table Load:
[ 0.306107] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.325828] ACPI: SSDT 00000000dd8e9618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.326166] ACPI: Dynamic OEM Table Load:
[ 0.326168] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.361655] ACPI: SSDT 00000000dd8e8d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.361946] ACPI: Dynamic OEM Table Load:
[ 0.361947] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.366289] ACPI: Interpreter enabled
[ 0.366291] ACPI: (supports S0 S3 S4 S5)
[ 0.366309] ACPI: Using IOAPIC for interrupt routing
[ 0.369645] ACPI: Power Resource [FN00] (off)
[ 0.369680] ACPI: Power Resource [FN01] (off)
[ 0.369714] ACPI: Power Resource [FN02] (off)
[ 0.369748] ACPI: Power Resource [FN03] (off)
[ 0.369781] ACPI: Power Resource [FN04] (off)
[ 0.370035] ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
[ 0.370154] ACPI: No dock devices found.
[ 0.370156] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.370326] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.370562] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.370563] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.370564] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.370565] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.370566] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.370567] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.370568] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.370569] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
[ 0.370584] PCI host bridge to bus 0000:00
[ 0.370586] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.370587] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.370587] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.370588] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.370589] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.370590] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.370591] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.370592] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
[ 0.370598] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.370623] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.370645] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.370654] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
[ 0.370675] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.370703] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.370719] pci 0000:00:14.0: reg 10: [mem 0xf7420000-0xf742ffff 64bit]
[ 0.370768] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.370783] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.370799] pci 0000:00:16.0: reg 10: [mem 0xf743b000-0xf743b00f 64bit]
[ 0.370852] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.370874] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[ 0.370887] pci 0000:00:19.0: reg 10: [mem 0xf7400000-0xf741ffff]
[ 0.370893] pci 0000:00:19.0: reg 14: [mem 0xf7439000-0xf7439fff]
[ 0.370900] pci 0000:00:19.0: reg 18: [io 0xf040-0xf05f]
[ 0.370949] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.370968] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.370985] pci 0000:00:1a.0: reg 10: [mem 0xf7438000-0xf74383ff]
[ 0.371061] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.371081] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.371093] pci 0000:00:1b.0: reg 10: [mem 0xf7430000-0xf7433fff 64bit]
[ 0.371146] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.371160] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.371213] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.371231] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.371285] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.371303] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
[ 0.371356] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.371377] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.371394] pci 0000:00:1d.0: reg 10: [mem 0xf7437000-0xf74373ff]
[ 0.371470] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.371490] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[ 0.371592] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.371604] pci 0000:00:1f.2: reg 10: [io 0xf090-0xf097]
[ 0.371610] pci 0000:00:1f.2: reg 14: [io 0xf080-0xf083]
[ 0.371615] pci 0000:00:1f.2: reg 18: [io 0xf070-0xf077]
[ 0.371621] pci 0000:00:1f.2: reg 1c: [io 0xf060-0xf063]
[ 0.371626] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
[ 0.371632] pci 0000:00:1f.2: reg 24: [mem 0xf7436000-0xf74367ff]
[ 0.371661] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.371672] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.371684] pci 0000:00:1f.3: reg 10: [mem 0xf7435000-0xf74350ff 64bit]
[ 0.371700] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.371743] pci 0000:01:00.0: [10de:1187] type 00 class 0x030000
[ 0.371751] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 0.371759] pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.371768] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.371774] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.371780] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
[ 0.371829] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
[ 0.371837] pci 0000:01:00.1: reg 10: [mem 0xf7080000-0xf7083fff]
[ 0.377566] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.377568] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.377569] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.377571] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.377592] pci 0000:02:00.0: [1b85:1041] type 00 class 0x010000
[ 0.377601] pci 0000:02:00.0: reg 10: [mem 0xf7340000-0xf735ffff 64bit]
[ 0.377608] pci 0000:02:00.0: reg 18: [mem 0xf7300000-0xf733ffff 64bit]
[ 0.377621] pci 0000:02:00.0: reg 30: [mem 0xf7360000-0xf736ffff pref]
[ 0.377642] pci 0000:02:00.0: supports D1
[ 0.377643] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.385541] pci 0000:00:01.1: PCI bridge to [bus 02-02]
[ 0.385543] pci 0000:00:01.1: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.385574] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.385623] pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
[ 0.385637] pci 0000:04:00.0: reg 10: [io 0xd050-0xd057]
[ 0.385646] pci 0000:04:00.0: reg 14: [io 0xd040-0xd043]
[ 0.385656] pci 0000:04:00.0: reg 18: [io 0xd030-0xd037]
[ 0.385666] pci 0000:04:00.0: reg 1c: [io 0xd020-0xd023]
[ 0.385675] pci 0000:04:00.0: reg 20: [io 0xd000-0xd01f]
[ 0.385685] pci 0000:04:00.0: reg 24: [mem 0xf7200000-0xf72001ff]
[ 0.393524] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.393527] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.393529] pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.393576] pci 0000:05:00.0: [1b21:0612] type 00 class 0x010601
[ 0.393590] pci 0000:05:00.0: reg 10: [io 0xc050-0xc057]
[ 0.393599] pci 0000:05:00.0: reg 14: [io 0xc040-0xc043]
[ 0.393609] pci 0000:05:00.0: reg 18: [io 0xc030-0xc037]
[ 0.393619] pci 0000:05:00.0: reg 1c: [io 0xc020-0xc023]
[ 0.393628] pci 0000:05:00.0: reg 20: [io 0xc000-0xc01f]
[ 0.393638] pci 0000:05:00.0: reg 24: [mem 0xf7100000-0xf71001ff]
[ 0.401504] pci 0000:00:1c.7: PCI bridge to [bus 05-05]
[ 0.401507] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.401509] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.401526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.401580] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.401598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.401612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[ 0.401630] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.401645] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 0.401673] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.401689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
[ 0.401746] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.401851] pci0000:00: ACPI _OSC control (0x18) granted
[ 0.404845] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.404869] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.404892] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.404914] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.404936] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.404959] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.404982] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.405004] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.405055] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.405057] vgaarb: loaded
[ 0.405058] vgaarb: bridge control possible 0000:01:00.0
[ 0.405138] SCSI subsystem initialized
[ 0.405161] libata version 3.00 loaded.
[ 0.405171] ACPI: bus type usb registered
[ 0.405179] usbcore: registered new interface driver usbfs
[ 0.405183] usbcore: registered new interface driver hub
[ 0.405193] usbcore: registered new device driver usb
[ 0.405226] PCI: Using ACPI for IRQ routing
[ 0.406373] PCI: pci_cache_line_size set to 64 bytes
[ 0.406417] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff]
[ 0.406418] e820: reserve RAM buffer [mem 0xcb608000-0xcbffffff]
[ 0.406419] e820: reserve RAM buffer [mem 0xcba5a000-0xcbffffff]
[ 0.406419] e820: reserve RAM buffer [mem 0xdd6ec000-0xdfffffff]
[ 0.406420] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.406421] e820: reserve RAM buffer [mem 0x81f000000-0x81fffffff]
[ 0.406466] NetLabel: Initializing
[ 0.406466] NetLabel: domain hash size = 128
[ 0.406467] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.406473] NetLabel: unlabeled traffic allowed by default
[ 0.406514] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.406518] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.408525] Switching to clocksource hpet
[ 0.411743] AppArmor: AppArmor Filesystem Enabled
[ 0.411752] pnp: PnP ACPI init
[ 0.411757] ACPI: bus type pnp registered
[ 0.411898] pnp 00:00: [bus 00-3e]
[ 0.411900] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.411901] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.411902] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.411903] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.411904] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.411905] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.411906] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.411907] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.411908] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.411909] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.411909] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.411910] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.411911] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.411912] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.411913] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.411914] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.411915] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.411916] pnp 00:00: [mem 0xe0000000-0xfeafffff window]
[ 0.411952] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.411964] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.411980] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.411981] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.411987] pnp 00:02: [io 0x0000-0x001f]
[ 0.411988] pnp 00:02: [io 0x0081-0x0091]
[ 0.411989] pnp 00:02: [io 0x0093-0x009f]
[ 0.411990] pnp 00:02: [io 0x00c0-0x00df]
[ 0.411991] pnp 00:02: [dma 4]
[ 0.412002] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.412005] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.412013] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.412058] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.412067] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.412080] pnp 00:05: [io 0x00f0]
[ 0.412086] pnp 00:05: [irq 13]
[ 0.412095] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.412139] pnp 00:06: [io 0x002e-0x002f]
[ 0.412140] pnp 00:06: [io 0x004e-0x004f]
[ 0.412141] pnp 00:06: [io 0x0061]
[ 0.412142] pnp 00:06: [io 0x0063]
[ 0.412143] pnp 00:06: [io 0x0065]
[ 0.412143] pnp 00:06: [io 0x0067]
[ 0.412144] pnp 00:06: [io 0x0070]
[ 0.412145] pnp 00:06: [io 0x0080]
[ 0.412147] pnp 00:06: [io 0x0092]
[ 0.412147] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.412148] pnp 00:06: [io 0x0680-0x069f]
[ 0.412149] pnp 00:06: [io 0xffff]
[ 0.412150] pnp 00:06: [io 0xffff]
[ 0.412151] pnp 00:06: [io 0xffff]
[ 0.412152] pnp 00:06: [io 0x1c00-0x1cfe]
[ 0.412152] pnp 00:06: [io 0x1d00-0x1dfe]
[ 0.412153] pnp 00:06: [io 0x1e00-0x1efe]
[ 0.412154] pnp 00:06: [io 0x1f00-0x1ffe]
[ 0.412155] pnp 00:06: [io 0x1800-0x18fe]
[ 0.412156] pnp 00:06: [io 0x164e-0x164f]
[ 0.412178] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.412180] system 00:06: [io 0xffff] has been reserved
[ 0.412181] system 00:06: [io 0xffff] has been reserved
[ 0.412182] system 00:06: [io 0xffff] has been reserved
[ 0.412183] system 00:06: [io 0x1c00-0x1cfe] has been reserved
[ 0.412184] system 00:06: [io 0x1d00-0x1dfe] has been reserved
[ 0.412185] system 00:06: [io 0x1e00-0x1efe] has been reserved
[ 0.412186] system 00:06: [io 0x1f00-0x1ffe] has been reserved
[ 0.412186] system 00:06: [io 0x1800-0x18fe] has been reserved
[ 0.412187] system 00:06: [io 0x164e-0x164f] has been reserved
[ 0.412189] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.412193] pnp 00:07: [io 0x0070-0x0077]
[ 0.412196] pnp 00:07: [irq 8]
[ 0.412205] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.412218] pnp 00:08: [io 0x1854-0x1857]
[ 0.412232] system 00:08: [io 0x1854-0x1857] has been reserved
[ 0.412233] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.412266] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.412267] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.412268] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.412269] pnp 00:09: [io 0x0290-0x029f]
[ 0.412285] system 00:09: [io 0x0290-0x029f] has been reserved
[ 0.412286] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.412297] pnp 00:0a: [io 0x0010-0x001f]
[ 0.412298] pnp 00:0a: [io 0x0022-0x003f]
[ 0.412299] pnp 00:0a: [io 0x0044-0x005f]
[ 0.412299] pnp 00:0a: [io 0x0062-0x0063]
[ 0.412300] pnp 00:0a: [io 0x0065-0x006f]
[ 0.412301] pnp 00:0a: [io 0x0072-0x007f]
[ 0.412302] pnp 00:0a: [io 0x0080]
[ 0.412303] pnp 00:0a: [io 0x0084-0x0086]
[ 0.412303] pnp 00:0a: [io 0x0088]
[ 0.412304] pnp 00:0a: [io 0x008c-0x008e]
[ 0.412305] pnp 00:0a: [io 0x0090-0x009f]
[ 0.412306] pnp 00:0a: [io 0x00a2-0x00bf]
[ 0.412307] pnp 00:0a: [io 0x00e0-0x00ef]
[ 0.412308] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.412325] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.412327] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.412571] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 0.412572] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[ 0.412573] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[ 0.412574] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[ 0.412574] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[ 0.412575] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[ 0.412576] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[ 0.412577] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[ 0.412578] pnp 00:0b: [mem 0xff000000-0xffffffff]
[ 0.412580] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[ 0.412581] pnp 00:0b: [mem 0xf7fef000-0xf7feffff]
[ 0.412582] pnp 00:0b: [mem 0xf7ff0000-0xf7ff0fff]
[ 0.412610] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.412611] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.412612] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.412613] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.412614] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.412615] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.412616] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.412617] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.412619] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 0.412620] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.412621] system 00:0b: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.412622] system 00:0b: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.412623] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.412768] pnp: PnP ACPI: found 12 devices
[ 0.412769] ACPI: ACPI bus type pnp unregistered
[ 0.418201] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.418203] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.418205] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.418207] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.418209] pci 0000:00:01.1: PCI bridge to [bus 02-02]
[ 0.418211] pci 0000:00:01.1: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.418214] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.418222] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.418224] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.418227] pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.418232] pci 0000:00:1c.7: PCI bridge to [bus 05-05]
[ 0.418234] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.418237] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.418260] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.418261] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.418262] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.418263] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff]
[ 0.418264] pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff]
[ 0.418265] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.418266] pci_bus 0000:00: resource 10 [mem 0x000e4000-0x000e7fff]
[ 0.418267] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff]
[ 0.418268] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.418269] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.418270] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.418271] pci_bus 0000:02: resource 1 [mem 0xf7300000-0xf73fffff]
[ 0.418272] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.418273] pci_bus 0000:04: resource 1 [mem 0xf7200000-0xf72fffff]
[ 0.418274] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 0.418275] pci_bus 0000:05: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.418290] NET: Registered protocol family 2
[ 0.418459] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.418952] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.419739] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.419835] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.419836] TCP: reno registered
[ 0.419856] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.419925] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.420001] NET: Registered protocol family 1
[ 0.431745] Freeing initrd memory: 15848k freed
[ 0.460478] pci 0000:01:00.0: Boot video device
[ 0.460491] PCI: CLS 64 bytes, default 64
[ 0.460492] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.460494] software IO TLB [mem 0xd96ea000-0xdd6e9fff] (64MB) mapped at [ffff8800d96ea000-ffff8800dd6e9fff]
[ 0.460830] audit: initializing netlink socket (disabled)
[ 0.460835] type=2000 audit(1374739450.348:1): initialized
[ 0.475367] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.477318] VFS: Disk quotas dquot_6.5.2
[ 0.477338] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.477557] fuse init (API version 7.19)
[ 0.477592] msgmni has been set to 32768
[ 0.477768] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.477782] io scheduler noop registered
[ 0.477783] io scheduler deadline registered (default)
[ 0.477795] io scheduler cfq registered
[ 0.477850] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.477885] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
[ 0.477996] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.478003] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.478023] intel_idle: does not run on family 6 model 60
[ 0.478061] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.478064] ACPI: Power Button [PWRB]
[ 0.478082] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.478083] ACPI: Power Button [PWRF]
[ 0.478119] ACPI: Fan [FAN0] (off)
[ 0.478132] ACPI: Fan [FAN1] (off)
[ 0.478144] ACPI: Fan [FAN2] (off)
[ 0.478155] ACPI: Fan [FAN3] (off)
[ 0.478167] ACPI: Fan [FAN4] (off)
[ 0.478197] ACPI: Requesting acpi_cpufreq
[ 0.478570] Monitor-Mwait will be used to enter C-1 state
[ 0.478579] Monitor-Mwait will be used to enter C-2 state
[ 0.478588] ACPI: acpi_idle registered with cpuidle
[ 0.482572] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.482574] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.482663] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.482664] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.482827] GHES: HEST is not enabled!
[ 0.483447] Linux agpgart interface v0.103
[ 0.483982] brd: module loaded
[ 0.484279] loop: module loaded
[ 0.484451] Fixed MDIO Bus: probed
[ 0.484469] tun: Universal TUN/TAP device driver, 1.6
[ 0.484470] tun: (C) 1999-2004 Max Krasnyansky
[ 0.484492] PPP generic driver version 2.4.2
[ 0.484513] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.484539] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.484541] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.484544] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.484561] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.488441] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.488450] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7438000
[ 0.500357] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.500367] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.500368] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.500369] usb usb1: Product: EHCI Host Controller
[ 0.500370] usb usb1: Manufacturer: Linux 3.5.0-34-generic ehci_hcd
[ 0.500371] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.500423] hub 1-0:1.0: USB hub found
[ 0.500424] hub 1-0:1.0: 2 ports detected
[ 0.500463] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.500465] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.500467] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.500482] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.504362] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.504370] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7437000
[ 0.516317] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.516323] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.516324] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.516325] usb usb2: Product: EHCI Host Controller
[ 0.516326] usb usb2: Manufacturer: Linux 3.5.0-34-generic ehci_hcd
[ 0.516327] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.516371] hub 2-0:1.0: USB hub found
[ 0.516372] hub 2-0:1.0: 2 ports detected
[ 0.516398] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.516405] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.516428] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 0.516430] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.516432] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.516495] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.516522] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.516550] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.516551] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.516552] usb usb3: Product: xHCI Host Controller
[ 0.516553] usb usb3: Manufacturer: Linux 3.5.0-34-generic xhci_hcd
[ 0.516553] usb usb3: SerialNumber: 0000:00:14.0
[ 0.516591] xHCI xhci_add_endpoint called for root hub
[ 0.516591] xHCI xhci_check_bandwidth called for root hub
[ 0.516601] hub 3-0:1.0: USB hub found
[ 0.516611] hub 3-0:1.0: 14 ports detected
[ 0.516661] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.516663] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.516673] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.516674] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.516675] usb usb4: Product: xHCI Host Controller
[ 0.516676] usb usb4: Manufacturer: Linux 3.5.0-34-generic xhci_hcd
[ 0.516676] usb usb4: SerialNumber: 0000:00:14.0
[ 0.516707] xHCI xhci_add_endpoint called for root hub
[ 0.516708] xHCI xhci_check_bandwidth called for root hub
[ 0.516717] hub 4-0:1.0: USB hub found
[ 0.516722] hub 4-0:1.0: 6 ports detected
[ 0.516786] usbcore: registered new interface driver libusual
[ 0.516801] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.519262] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.519264] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.519310] mousedev: PS/2 mouse device common for all mice
[ 0.519366] rtc_cmos 00:07: RTC can wake from S4
[ 0.519450] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.519471] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.519502] device-mapper: uevent: version 1.0.3
[ 0.519528] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.519574] cpuidle: using governor ladder
[ 0.519636] cpuidle: using governor menu
[ 0.519637] EFI Variables Facility v0.08 2004-May-17
[ 0.519729] ashmem: initialized
[ 0.519783] TCP: cubic registered
[ 0.519825] NET: Registered protocol family 10
[ 0.519914] NET: Registered protocol family 17
[ 0.519918] Key type dns_resolver registered
[ 0.519981] PM: Hibernation image not present or could not be loaded.
[ 0.519985] registered taskstats version 1
[ 0.521625] Key type trusted registered
[ 0.522599] Key type encrypted registered
[ 0.523867] Magic number: 5:245:69
[ 0.523910] memory memory97: hash matches
[ 0.523958] rtc_cmos 00:07: setting system clock to 2013-07-25 08:04:11 UTC (1374739451)
[ 0.524856] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.524857] EDD information not available.
[ 0.525800] Freeing unused kernel memory: 948k freed
[ 0.525855] Write protecting the kernel read-only data: 12288k
[ 0.528004] Freeing unused kernel memory: 1360k freed
[ 0.529721] Freeing unused kernel memory: 1064k freed
[ 0.538902] udevd[120]: starting version 175
[ 0.546935] xor: automatically using best checksumming function:
[ 0.551030] ahci 0000:00:1f.2: version 3.0
[ 0.551077] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.551128] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.551130] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.551133] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.551926] mvsas 0000:02:00.0: mvsas: driver version 0.8.16
[ 0.553285] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
[ 0.553287] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 0.553673] mvsas 0000:02:00.0: mvsas: PCI-E x4, Bandwidth Usage: 5.0 Gbps
[ 0.584126] avx : 26780.000 MB/sec
[ 0.584560] device-mapper: dm-raid45: initialized v0.2594b
[ 0.585311] md: linear personality registered for level -1
[ 0.586020] md: multipath personality registered for level -4
[ 0.586745] md: raid0 personality registered for level 0
[ 0.587510] md: raid1 personality registered for level 1
[ 0.588334] async_tx: api initialized (async)
[ 0.588484] scsi1 : ahci
[ 0.588546] scsi2 : ahci
[ 0.588579] scsi3 : ahci
[ 0.588609] scsi4 : ahci
[ 0.588640] scsi5 : ahci
[ 0.588669] scsi6 : ahci
[ 0.588853] ata1: SATA max UDMA/133 abar m2048@0xf7436000 port 0xf7436100 irq 43
[ 0.588854] ata2: SATA max UDMA/133 abar m2048@0xf7436000 port 0xf7436180 irq 43
[ 0.588855] ata3: SATA max UDMA/133 abar m2048@0xf7436000 port 0xf7436200 irq 43
[ 0.588857] ata4: SATA max UDMA/133 abar m2048@0xf7436000 port 0xf7436280 irq 43
[ 0.588858] ata5: SATA max UDMA/133 abar m2048@0xf7436000 port 0xf7436300 irq 43
[ 0.588859] ata6: SATA max UDMA/133 abar m2048@0xf7436000 port 0xf7436380 irq 43
[ 0.588892] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.588940] ahci 0000:04:00.0: irq 44 for MSI/MSI-X
[ 0.588962] ahci: SSS flag set, parallel bus scan disabled
[ 0.588969] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.588997] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.588999] ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
[ 0.589007] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 0.589163] scsi7 : ahci
[ 0.589203] scsi8 : ahci
[ 0.589232] ata7: SATA max UDMA/133 abar m512@0xf7200000 port 0xf7200100 irq 44
[ 0.589235] ata8: SATA max UDMA/133 abar m512@0xf7200000 port 0xf7200180 irq 44
[ 0.589277] ahci 0000:05:00.0: irq 46 for MSI/MSI-X
[ 0.589296] ahci: SSS flag set, parallel bus scan disabled
[ 0.589323] ahci 0000:05:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.589325] ahci 0000:05:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 0.589480] scsi9 : ahci
[ 0.589521] scsi10 : ahci
[ 0.589549] ata9: SATA max UDMA/133 abar m512@0xf7100000 port 0xf7100100 irq 46
[ 0.589552] ata10: SATA max UDMA/133 abar m512@0xf7100000 port 0xf7100180 irq 46
[ 0.655972] raid6: sse2x1 12101 MB/s
[ 0.723797] raid6: sse2x2 14658 MB/s
[ 0.756801] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 74:d0:2b:c4:e0:28
[ 0.756803] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 0.756828] e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 0.791602] raid6: sse2x4 17715 MB/s
[ 0.791604] raid6: using algorithm sse2x4 (17715 MB/s)
[ 0.791605] raid6: using ssse3x2 recovery algorithm
[ 0.811589] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 0.907348] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.907362] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.907988] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[ 0.907992] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8807f2cab028), AE_NOT_FOUND (20120320/psparse-536)
[ 0.908193] ata1.00: ATA-8: WDC WD1001FALS-00E8B0, 05.00K05, max UDMA/133
[ 0.908195] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.908877] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[ 0.908880] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8807f2cab028), AE_NOT_FOUND (20120320/psparse-536)
[ 0.909089] ata1.00: configured for UDMA/133
[ 0.909159] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[ 0.909163] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff8807f2cab190), AE_NOT_FOUND (20120320/psparse-536)
[ 0.909257] scsi 1:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[ 0.909344] ata4.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[ 0.909345] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.909349] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.909359] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 0.909365] sd 1:0:0:0: [sda] Write Protect is off
[ 0.909368] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.909378] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.911288] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[ 0.911296] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff8807f2cab190), AE_NOT_FOUND (20120320/psparse-536)
[ 0.911358] ata9: SATA link down (SStatus 0 SControl 300)
[ 0.911359] ata7: SATA link down (SStatus 0 SControl 300)
[ 0.911362] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.911387] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.911401] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.911413] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.911994] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[ 0.911997] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff8807f2cab0a0), AE_NOT_FOUND (20120320/psparse-536)
[ 0.912212] ata2.00: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133
[ 0.912214] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.912222] ata4.00: configured for UDMA/133
[ 0.912895] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[ 0.912898] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff8807f2cab0a0), AE_NOT_FOUND (20120320/psparse-536)
[ 0.913102] ata2.00: configured for UDMA/133
[ 0.913292] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[ 0.913295] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff8807f2cab118), AE_NOT_FOUND (20120320/psparse-536)
[ 0.914052] ata3.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[ 0.914054] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.914549] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[ 0.914552] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807f2cab280), AE_NOT_FOUND (20120320/psparse-536)
[ 0.914723] ata6.00: ATA-8: WDC WD2002FYPS-02W3B0, 04.01G01, max UDMA/133
[ 0.914725] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.914887] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[ 0.914890] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff8807f2cab208), AE_NOT_FOUND (20120320/psparse-536)
[ 0.915217] ata5.00: ATA-8: WDC WD2002FYPS-02W3B0, 04.01G01, max UDMA/133
[ 0.915219] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.915992] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[ 0.915995] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff8807f2cab118), AE_NOT_FOUND (20120320/psparse-536)
[ 0.916186] ata3.00: configured for UDMA/133
[ 0.917964] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[ 0.917966] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807f2cab280), AE_NOT_FOUND (20120320/psparse-536)
[ 0.918129] ata6.00: configured for UDMA/133
[ 0.918786] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[ 0.918788] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff8807f2cab208), AE_NOT_FOUND (20120320/psparse-536)
[ 0.919209] ata5.00: configured for UDMA/133
[ 0.926283] sda: sda1
[ 0.926382] sd 1:0:0:0: [sda] Attached SCSI disk
[ 0.926474] scsi 2:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[ 0.926523] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.926535] sd 2:0:0:0: [sdb] Write Protect is off
[ 0.926536] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.926541] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.926552] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 0.928509] sdb: sdb1
[ 0.928609] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 0.928723] scsi 3:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 0.928802] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.928815] sd 3:0:0:0: [sdc] Write Protect is off
[ 0.928816] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 0.928822] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.928837] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 0.930809] sdc: sdc1
[ 0.930900] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 0.930971] scsi 4:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 0.931023] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.931035] sd 4:0:0:0: [sdd] Write Protect is off
[ 0.931037] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 0.931042] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.931046] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 0.938963] sdd: sdd1
[ 0.939096] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 0.939240] scsi 5:0:0:0: Direct-Access ATA WDC WD2002FYPS-0 04.0 PQ: 0 ANSI: 5
[ 0.939309] sd 5:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 0.939314] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 0.939323] sd 5:0:0:0: [sde] Write Protect is off
[ 0.939324] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 0.939330] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.943612] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 0.943614] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.943869] hub 1-1:1.0: USB hub found
[ 0.943961] hub 1-1:1.0: 6 ports detected
[ 1.054968] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.186994] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.186996] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.187249] hub 2-1:1.0: USB hub found
[ 1.187344] hub 2-1:1.0: 8 ports detected
[ 1.354191] usb 3-5: new high-speed USB device number 2 using xhci_hcd
[ 1.357218] sde: sde1
[ 1.357348] sd 5:0:0:0: [sde] Attached SCSI disk
[ 1.357420] scsi 6:0:0:0: Direct-Access ATA WDC WD2002FYPS-0 04.0 PQ: 0 ANSI: 5
[ 1.357479] sd 6:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.357505] sd 6:0:0:0: [sdf] Write Protect is off
[ 1.357516] sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 1.357524] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.357526] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 1.370806] usb 3-5: New USB device found, idVendor=13fd, idProduct=2040
[ 1.370808] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.370809] usb 3-5: Product: USB Mass Storage Device
[ 1.370810] usb 3-5: Manufacturer: TSSTcorp
[ 1.370812] usb 3-5: SerialNumber: SATAHH000000000e8b6
[ 1.372256] Initializing USB Mass Storage driver...
[ 1.372308] scsi11 : usb-storage 3-5:1.0
[ 1.372341] usbcore: registered new interface driver usb-storage
[ 1.372342] USB Mass Storage support registered.
[ 1.457938] Refined TSC clocksource calibration: 3497.972 MHz.
[ 1.457941] Switching to clocksource tsc
[ 1.537735] usb 3-6: new high-speed USB device number 3 using xhci_hcd
[ 1.553885] usb 3-6: New USB device found, idVendor=0424, idProduct=2514
[ 1.553887] usb 3-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.554454] hub 3-6:1.0: USB hub found
[ 1.554475] hub 3-6:1.0: 3 ports detected
[ 1.721269] usb 3-11: new full-speed USB device number 4 using xhci_hcd
[ 1.738568] usb 3-11: New USB device found, idVendor=1b1c, idProduct=0c04
[ 1.738570] usb 3-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.738571] usb 3-11: Product: Integrated USB Bridge
[ 1.738572] usb 3-11: Manufacturer: Corsair Memory, Inc.
[ 1.752975] sdf: sdf1
[ 1.753062] sd 6:0:0:0: [sdf] Attached SCSI disk
[ 1.825044] usb 3-6.1: new high-speed USB device number 5 using xhci_hcd
[ 1.841157] usb 3-6.1: New USB device found, idVendor=0424, idProduct=2640
[ 1.841159] usb 3-6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.841588] hub 3-6.1:1.0: USB hub found
[ 1.841632] hub 3-6.1:1.0: 3 ports detected
[ 1.844965] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.846436] ata8.00: ATA-9: INTEL SSDSC2CT180A3, 300i, max UDMA/133
[ 1.846438] ata8.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.856298] ata8.00: configured for UDMA/133
[ 1.856371] scsi 8:0:0:0: Direct-Access ATA INTEL SSDSC2CT18 300i PQ: 0 ANSI: 5
[ 1.856442] sd 8:0:0:0: [sdg] 351651888 512-byte logical blocks: (180 GB/167 GiB)
[ 1.856448] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 1.856464] sd 8:0:0:0: [sdg] Write Protect is off
[ 1.856466] sd 8:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[ 1.856471] sd 8:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.857052] sdg: sdg1 sdg2 sdg3
[ 1.857399] sd 8:0:0:0: [sdg] Attached SCSI disk
[ 1.928748] usb 3-6.2: new low-speed USB device number 6 using xhci_hcd
[ 1.954179] usb 3-6.2: New USB device found, idVendor=046d, idProduct=c051
[ 1.954181] usb 3-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.954183] usb 3-6.2: Product: USB-PS/2 Optical Mouse
[ 1.954184] usb 3-6.2: Manufacturer: Logitech
[ 1.954238] usb 3-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.959237] usbcore: registered new interface driver usbhid
[ 1.959238] usbhid: USB HID core driver
[ 2.040447] usb 3-6.3: new low-speed USB device number 7 using xhci_hcd
[ 2.064575] usb 3-6.3: New USB device found, idVendor=045e, idProduct=00b0
[ 2.064577] usb 3-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.064578] usb 3-6.3: Product: Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard
[ 2.064579] usb 3-6.3: Manufacturer: Microsoft
[ 2.064690] usb 3-6.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.064693] usb 3-6.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.068828] hid-generic 0003:1B1C:0C04.0001: hiddev0,hidraw0: USB HID v1.11 Device [Corsair Memory, Inc. Integrated USB Bridge] on usb-0000:00:14.0-11/input0
[ 2.068891] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.2/3-6.2:1.0/input/input2
[ 2.068990] hid-generic 0003:046D:C051.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-6.2/input0
[ 2.069054] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.3/3-6.3:1.0/input/input3
[ 2.069116] hid-generic 0003:045E:00B0.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard] on usb-0000:00:14.0-6.3/input0
[ 2.073084] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.3/3-6.3:1.1/input/input4
[ 2.073131] hid-generic 0003:045E:00B0.0004: input,hidraw3: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard] on usb-0000:00:14.0-6.3/input1
[ 2.144206] usb 3-6.1.1: new high-speed USB device number 8 using xhci_hcd
[ 2.172140] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.173080] md: raid6 personality registered for level 6
[ 2.173082] md: raid5 personality registered for level 5
[ 2.173083] md: raid4 personality registered for level 4
[ 2.176121] md: raid10 personality registered for level 10
[ 2.184127] usb 3-6.1.1: New USB device found, idVendor=0424, idProduct=4063
[ 2.184129] usb 3-6.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.184130] usb 3-6.1.1: Product: Ultra Fast Media Reader
[ 2.184131] usb 3-6.1.1: Manufacturer: Generic
[ 2.184132] usb 3-6.1.1: SerialNumber: 000000264001
[ 2.184555] scsi12 : usb-storage 3-6.1.1:1.0
[ 2.223290] md: bind
[ 2.225896] md: bind
[ 2.228674] md: bind
[ 2.232283] md: bind
[ 2.233364] bio: create slab at 1
[ 2.233373] md/raid:md5: device sdc1 operational as raid disk 0
[ 2.233374] md/raid:md5: device sdd1 operational as raid disk 1
[ 2.233374] md/raid:md5: device sdb1 operational as raid disk 2
[ 2.233375] md/raid:md5: device sda1 operational as raid disk 3
[ 2.233556] md/raid:md5: allocated 4336kB
[ 2.233583] md/raid:md5: raid level 5 active with 4 out of 4 devices, algorithm 2
[ 2.233584] RAID conf printout:
[ 2.233585] --- level:5 rd:4 wd:4
[ 2.233585] disk 0, o:1, dev:sdc1
[ 2.233586] disk 1, o:1, dev:sdd1
[ 2.233587] disk 2, o:1, dev:sdb1
[ 2.233588] disk 3, o:1, dev:sda1
[ 2.233598] md5: detected capacity change from 0 to 3000602984448
[ 2.234386] md5: unknown partition table
[ 2.235963] md: bind
[ 2.244933] md: bind
[ 2.245697] md/raid1:md8: active with 2 out of 2 mirrors
[ 2.245705] md8: detected capacity change from 0 to 2000001368064
[ 2.246434] md8: unknown partition table
[ 2.255918] usb 3-6.1.3: new full-speed USB device number 9 using xhci_hcd
[ 2.274292] usb 3-6.1.3: New USB device found, idVendor=1a44, idProduct=0920
[ 2.274294] usb 3-6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.274295] usb 3-6.1.3: Product: DIGIPASS 920
[ 2.274296] usb 3-6.1.3: Manufacturer: Vasco
[ 2.274352] usb 3-6.1.3: ep 0x83 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 2.368112] scsi 11:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S204N TS00 PQ: 0 ANSI: 0
[ 2.370965] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.370967] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.371035] sr 11:0:0:0: Attached scsi CD-ROM sr0
[ 2.371088] sr 11:0:0:0: Attached scsi generic sg7 type 5
[ 3.186907] scsi 12:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.91 PQ: 0 ANSI: 0
[ 3.187806] sd 12:0:0:0: Attached scsi generic sg8 type 0
[ 3.195206] sd 12:0:0:0: [sdh] Attached SCSI removable disk
[ 3.337163] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_94xx.c 838:get all reg link rate is 0x122000
[ 3.337164] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_94xx.c 843:get link rate is 10
[ 3.455914] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 1175:phy 0 attach dev info is 20001
[ 3.455915] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 1177:phy 0 attach sas addr is 0
[ 3.556606] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_94xx.c 838:get all reg link rate is 0x122000
[ 3.556608] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_94xx.c 843:get link rate is 10
[ 3.675358] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 1175:phy 1 attach dev info is 20001
[ 3.675358] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 1177:phy 1 attach sas addr is 1
[ 3.776047] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 1175:phy 2 attach dev info is 0
[ 3.776049] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 1177:phy 2 attach sas addr is 0
[ 3.879786] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 1175:phy 3 attach dev info is 0
[ 3.879788] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 1177:phy 3 attach sas addr is 0
[ 6.660728] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_94xx.c 838:get all reg link rate is 0x122000
[ 6.660730] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_94xx.c 843:get link rate is 10
[ 6.779479] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 1175:phy 4 attach dev info is 20001
[ 6.779480] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 1177:phy 4 attach sas addr is 4
[ 6.880184] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_94xx.c 838:get all reg link rate is 0x122000
[ 6.880196] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_94xx.c 843:get link rate is 10
[ 6.998946] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 1175:phy 5 attach dev info is 20001
[ 6.998946] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 1177:phy 5 attach sas addr is 5
[ 7.099614] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 1175:phy 6 attach dev info is 0
[ 7.099616] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 1177:phy 6 attach sas addr is 0
[ 7.203351] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 1175:phy 7 attach dev info is 0
[ 7.203353] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 1177:phy 7 attach sas addr is 0
[ 7.203358] scsi0 : mvsas
[ 7.203881] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 277:phy 0 byte dmaded.
[ 7.203884] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 277:phy 1 byte dmaded.
[ 7.203887] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 277:phy 4 byte dmaded.
[ 7.203891] /build/buildd/linux-lts-quantal-3.5.0/drivers/scsi/mvsas/mv_sas.c 277:phy 5 byte dmaded.
[ 7.203910] sas: phy-0:0 added to port-0:0, phy_mask:0x1 ( 0)
[ 7.203930] sas: phy-0:1 added to port-0:1, phy_mask:0x2 ( 100000000000000)
[ 7.203947] sas: phy-0:4 added to port-0:2, phy_mask:0x1 ( 400000000000000)
[ 7.203966] sas: phy-0:5 added to port-0:3, phy_mask:0x2 ( 500000000000000)
[ 7.203974] sas: DOING DISCOVERY on port 0, pid:328
[ 7.203977] sas: DONE DISCOVERY on port 0, pid:328, result:0
[ 7.203981] sas: DOING DISCOVERY on port 1, pid:328
[ 7.203983] sas: DONE DISCOVERY on port 1, pid:328, result:0
[ 7.203987] sas: DOING DISCOVERY on port 2, pid:328
[ 7.203989] sas: DONE DISCOVERY on port 2, pid:328, result:0
[ 7.203993] sas: DOING DISCOVERY on port 3, pid:328
[ 7.203995] sas: DONE DISCOVERY on port 3, pid:328, result:0
[ 7.204002] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 7.204006] sas: ata11: end_device-0:0: dev error handler
[ 7.372499] ata11.00: ATA-8: OCZ-REVODRIVE3 X2, 2.22, max UDMA/133
[ 7.372501] ata11.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.380209] ata11.00: configured for UDMA/133
[ 7.380260] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0
[ 7.394990] scsi 0:0:0:0: Direct-Access ATA OCZ-REVODRIVE3 X 2.22 PQ: 0 ANSI: 5
[ 7.394999] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 7.395008] sas: ata11: end_device-0:0: dev error handler
[ 7.395010] sas: ata12: end_device-0:1: dev error handler
[ 7.562896] ata12.00: ATA-8: OCZ-REVODRIVE3 X2, 2.22, max UDMA/133
[ 7.562898] ata12.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.571763] ata12.00: configured for UDMA/133
[ 7.571814] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0
[ 7.586522] scsi 0:0:1:0: Direct-Access ATA OCZ-REVODRIVE3 X 2.22 PQ: 0 ANSI: 5
[ 7.586531] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 7.586542] sas: ata11: end_device-0:0: dev error handler
[ 7.586546] sas: ata12: end_device-0:1: dev error handler
[ 7.586547] sas: ata13: end_device-0:2: dev error handler
[ 7.753570] ata13.00: ATA-8: OCZ-REVODRIVE3 X2, 2.22, max UDMA/133
[ 7.753572] ata13.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.763513] ata13.00: configured for UDMA/133
[ 7.763565] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0
[ 7.778011] scsi 0:0:2:0: Direct-Access ATA OCZ-REVODRIVE3 X 2.22 PQ: 0 ANSI: 5
[ 7.778019] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 7.778032] sas: ata11: end_device-0:0: dev error handler
[ 7.778037] sas: ata12: end_device-0:1: dev error handler
[ 7.778041] sas: ata13: end_device-0:2: dev error handler
[ 7.778043] sas: ata14: end_device-0:3: dev error handler
[ 7.944782] ata14.00: ATA-8: OCZ-REVODRIVE3 X2, 2.22, max UDMA/133
[ 7.944784] ata14.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.954727] ata14.00: configured for UDMA/133
[ 7.954779] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0
[ 7.969522] scsi 0:0:3:0: Direct-Access ATA OCZ-REVODRIVE3 X 2.22 PQ: 0 ANSI: 5
[ 7.969652] sd 0:0:0:0: [sdi] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 7.969656] sd 0:0:0:0: Attached scsi generic sg9 type 0
[ 7.969765] sd 0:0:1:0: [sdj] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 7.969790] sd 0:0:1:0: Attached scsi generic sg10 type 0
[ 7.969792] sd 0:0:0:0: [sdi] Write Protect is off
[ 7.969794] sd 0:0:0:0: [sdi] Mode Sense: 00 3a 00 00
[ 7.969805] sd 0:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.969807] sd 0:0:1:0: [sdj] Write Protect is off
[ 7.969808] sd 0:0:1:0: [sdj] Mode Sense: 00 3a 00 00
[ 7.969826] sd 0:0:1:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.970113] sd 0:0:2:0: [sdk] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 7.970150] sd 0:0:2:0: [sdk] Write Protect is off
[ 7.970152] sd 0:0:2:0: [sdk] Mode Sense: 00 3a 00 00
[ 7.970161] sd 0:0:2:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.970169] sd 0:0:2:0: Attached scsi generic sg11 type 0
[ 7.970460] sd 0:0:3:0: [sdl] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 7.970489] sd 0:0:3:0: Attached scsi generic sg12 type 0
[ 7.970494] sd 0:0:3:0: [sdl] Write Protect is off
[ 7.970496] sd 0:0:3:0: [sdl] Mode Sense: 00 3a 00 00
[ 7.970505] sd 0:0:3:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.971178] sdl: sdl1 sdl2
[ 7.971289] sd 0:0:3:0: [sdl] Attached SCSI disk
[ 7.971726] sdj: sdj1 sdj2
[ 7.971728] sdi: sdi1 sdi2
[ 7.971849] sd 0:0:0:0: [sdi] Attached SCSI disk
[ 7.971852] sd 0:0:1:0: [sdj] Attached SCSI disk
[ 7.971881] sdk: sdk1 sdk2
[ 7.972013] sd 0:0:2:0: [sdk] Attached SCSI disk
[ 8.000488] md: bind
[ 8.012011] md: bind
[ 8.014105] md: bind
[ 8.016277] md: bind
[ 8.017857] md/raid:md0: device sdj2 operational as raid disk 1
[ 8.017859] md/raid:md0: device sdi2 operational as raid disk 0
[ 8.017859] md/raid:md0: device sdk2 operational as raid disk 2
[ 8.017860] md/raid:md0: device sdl2 operational as raid disk 3
[ 8.018002] md/raid:md0: allocated 4336kB
[ 8.018043] md/raid:md0: raid level 5 active with 4 out of 4 devices, algorithm 2
[ 8.018044] RAID conf printout:
[ 8.018045] --- level:5 rd:4 wd:4
[ 8.018046] disk 0, o:1, dev:sdi2
[ 8.018046] disk 1, o:1, dev:sdj2
[ 8.018047] disk 2, o:1, dev:sdk2
[ 8.018048] disk 3, o:1, dev:sdl2
[ 8.018060] md0: detected capacity change from 0 to 174067286016
[ 8.019940] md0: unknown partition table
[ 13.099332] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 14.621996] Adding 9767516k swap on /dev/sdg2. Priority:-1 extents:1 across:9767516k SS
[ 14.624428] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.626394] udevd[577]: starting version 175
[ 14.632205] lp: driver loaded but no devices found
[ 14.645196] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro
[ 14.653615] wmi: Mapper loaded
[ 14.677981] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 14.684314] 8021q: 802.1Q VLAN Support v1.8
[ 14.693329] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
[ 14.694277] nvidia: module license 'NVIDIA' taints kernel.
[ 14.694288] Disabling lock debugging due to kernel taint
[ 14.701139] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 14.701213] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 310.14 Tue Oct 9 11:52:41 PDT 2012
[ 14.726363] hda_codec: ALC1150: SKU not ready 0x00000000
[ 14.726514] device-mapper: multipath: version 1.4.0 loaded
[ 14.735292] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 14.735406] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 14.735486] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 14.735782] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 14.736812] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 14.737118] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.737332] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.737509] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.737826] ACPI Warning: 0x0000000000001860-0x000000000000187f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 14.737831] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.737832] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 14.737835] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 14.737837] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.737840] ACPI Warning: 0x0000000000001c00-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20120320/utaddress-251)
[ 14.737842] ACPI Warning: 0x0000000000001c00-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20120320/utaddress-251)
[ 14.737845] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.737846] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 14.738068] hda_intel: Disabling MSI
[ 14.738078] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[ 14.742231] EXT4-fs (md5): warning: maximal mount count reached, running e2fsck is recommended
[ 14.754910] asus_wmi: ASUS WMI generic driver loaded
[ 14.755273] asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.9asus_wmi: SFUN value: 0x0[ 14.755444] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input13
[ 14.760932] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
[ 14.762736] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
[ 14.766298] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
[ 14.768293] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x9
[ 14.771178] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x9
[ 14.772937] EXT4-fs (md5): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 14.774378] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x9
[ 14.775655] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x9
[ 14.777936] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 14.800172] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 14.833903] EXT4-fs (md8): warning: maximal mount count reached, running e2fsck is recommended
[ 14.877445] EXT4-fs (md8): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 14.879551] kjournald starting. Commit interval 5 seconds
[ 14.879625] EXT3-fs (sdg1): using internal journal
[ 14.879628] EXT3-fs (sdg1): mounted filesystem with ordered data mode
[ 14.903867] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 14.904497] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.914731] EXT4-fs (sdg3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 14.939272] type=1400 audit(1374739465.945:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1776 comm="apparmor_parser"
[ 14.939421] type=1400 audit(1374739465.945:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1783 comm="apparmor_parser"
[ 14.939450] type=1400 audit(1374739465.945:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1776 comm="apparmor_parser"
[ 14.939550] type=1400 audit(1374739465.945:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1776 comm="apparmor_parser"
[ 14.939599] type=1400 audit(1374739465.945:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1783 comm="apparmor_parser"
[ 14.939741] type=1400 audit(1374739465.949:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1783 comm="apparmor_parser"
[ 14.940775] type=1400 audit(1374739465.949:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1799 comm="apparmor_parser"
[ 14.940927] type=1400 audit(1374739465.949:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=1801 comm="apparmor_parser"
[ 14.940962] type=1400 audit(1374739465.949:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1799 comm="apparmor_parser"
[ 14.940983] type=1400 audit(1374739465.949:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1798 comm="apparmor_parser"
[ 14.953996] IPv6: ADDRCONF(NETDEV_UP): vlan3: link is not ready
[ 14.958395] IPv6: ADDRCONF(NETDEV_UP): vlan33: link is not ready
[ 14.963932] IPv6: ADDRCONF(NETDEV_UP): vlan102: link is not ready
[ 14.981123] IPv6: ADDRCONF(NETDEV_UP): vlan509: link is not ready
[ 14.985352] IPv6: ADDRCONF(NETDEV_UP): vlan504: link is not ready
[ 15.000409] IPv6: ADDRCONF(NETDEV_UP): vlan2100: link is not ready
[ 15.002959] IPv6: ADDRCONF(NETDEV_UP): vlan2000: link is not ready
[ 15.091724] WARNING! power/level is deprecated; use power/control instead
[ 15.334757] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 15.334852] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 15.334942] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 15.335033] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 15.358914] init: udev-fallback-graphics main process (3174) terminated with status 1
[ 16.462839] ppdev: user-space parallel port driver
[ 16.464562] Bluetooth: Core ver 2.16
[ 16.464573] NET: Registered protocol family 31
[ 16.464574] Bluetooth: HCI device and connection manager initialized
[ 16.464575] Bluetooth: HCI socket layer initialized
[ 16.464577] Bluetooth: L2CAP socket layer initialized
[ 16.464579] Bluetooth: SCO socket layer initialized
[ 16.468934] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.468936] Bluetooth: BNEP filters: protocol multicast
[ 16.470238] Bluetooth: RFCOMM TTY layer initialized
[ 16.470241] Bluetooth: RFCOMM socket layer initialized
[ 16.470242] Bluetooth: RFCOMM ver 1.11
[ 18.475704] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 18.476208] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.476704] IPv6: ADDRCONF(NETDEV_CHANGE): vlan3: link becomes ready
[ 18.477152] IPv6: ADDRCONF(NETDEV_CHANGE): vlan33: link becomes ready
[ 18.477598] IPv6: ADDRCONF(NETDEV_CHANGE): vlan102: link becomes ready
[ 18.478043] IPv6: ADDRCONF(NETDEV_CHANGE): vlan504: link becomes ready
[ 18.478489] IPv6: ADDRCONF(NETDEV_CHANGE): vlan509: link becomes ready
[ 18.478997] IPv6: ADDRCONF(NETDEV_CHANGE): vlan2000: link becomes ready
[ 18.479442] IPv6: ADDRCONF(NETDEV_CHANGE): vlan2100: link becomes ready
[ 20.012527] init: failsafe main process (3200) killed by TERM signal
[ 20.024157] audit_printk_skb: 24 callbacks suppressed
[ 20.024160] type=1400 audit(1374739471.045:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=3485 comm="apparmor_parser"
[ 20.024234] type=1400 audit(1374739471.045:21): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=3479 comm="apparmor_parser"
[ 20.024508] type=1400 audit(1374739471.045:22): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=3479 comm="apparmor_parser"
[ 20.024662] type=1400 audit(1374739471.045:23): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=3479 comm="apparmor_parser"
[ 20.024935] type=1400 audit(1374739471.045:24): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=3484 comm="apparmor_parser"
[ 20.024968] type=1400 audit(1374739471.045:25): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=3478 comm="apparmor_parser"
[ 20.025039] type=1400 audit(1374739471.045:26): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=3484 comm="apparmor_parser"
[ 20.025184] type=1400 audit(1374739471.045:27): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=3478 comm="apparmor_parser"
[ 20.025246] type=1400 audit(1374739471.045:28): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=3482 comm="apparmor_parser"
[ 20.025558] type=1400 audit(1374739471.045:29): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=3482 comm="apparmor_parser"
[ 20.073742] /dev/vmmon[3586]: Module vmmon: registered with major=10 minor=165
[ 20.073745] /dev/vmmon[3586]: Module vmmon: initialized
[ 20.076750] [3598]: VMCI: shared components initialized.
[ 20.076768] [3598]: VMCI: host components initialized.
[ 20.076805] [3598]: VMCI: Module registered (name=vmci,major=10,minor=54).
[ 20.076807] [3598]: VMCI: Using host personality
[ 20.076808] [3598]: VMCI: Module (name=vmci) is initialized
[ 20.122480] /dev/vmnet: open called by PID 3673 (vmnet-bridge)
[ 20.122485] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 20.122498] /dev/vmnet: port on hub 0 successfully opened
[ 20.122504] bridge-vlan2100: up
[ 20.122506] bridge-vlan2100: attached
[ 20.123673] /dev/vmnet: open called by PID 3678 (vmnet-bridge)
[ 20.123677] /dev/vmnet: hub 3 does not exist, allocating memory.
[ 20.123684] /dev/vmnet: port on hub 3 successfully opened
[ 20.123689] bridge-vlan3: up
[ 20.123690] bridge-vlan3: attached
[ 20.124484] /dev/vmnet: open called by PID 3680 (vmnet-bridge)
[ 20.124488] /dev/vmnet: hub 4 does not exist, allocating memory.
[ 20.124499] /dev/vmnet: port on hub 4 successfully opened
[ 20.124504] bridge-vlan504: up
[ 20.124505] bridge-vlan504: attached
[ 20.125326] /dev/vmnet: open called by PID 3682 (vmnet-bridge)
[ 20.125328] /dev/vmnet: hub 6 does not exist, allocating memory.
[ 20.125335] /dev/vmnet: port on hub 6 successfully opened
[ 20.125340] bridge-vlan33: up
[ 20.125341] bridge-vlan33: attached
[ 20.126386] /dev/vmnet: open called by PID 3687 (vmnet-bridge)
[ 20.126389] /dev/vmnet: hub 9 does not exist, allocating memory.
[ 20.126396] /dev/vmnet: port on hub 9 successfully opened
[ 20.126402] bridge-vlan509: up
[ 20.126403] bridge-vlan509: attached
[ 20.656600] NVRM: GPU at 0000:01:00: GPU-306e7018-1bef-8e47-52de-e4e2ebaaf8bb
[ 21.149219] /dev/vmnet: open called by PID 4026 (vmnet-netifup)
[ 21.149229] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 21.149245] /dev/vmnet: port on hub 1 successfully opened
[ 21.156933] /dev/vmnet: open called by PID 4032 (vmnet-dhcpd)
[ 21.156943] /dev/vmnet: port on hub 1 successfully opened
[ 21.158823] /dev/vmnet: open called by PID 4055 (vmnet-natd)
[ 21.158829] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 21.158836] /dev/vmnet: port on hub 8 successfully opened
[ 21.159344] userif-7: sent link down event.
[ 21.159345] userif-7: sent link up event.[ 21.159967] /dev/vmnet: open called by PID 4063 (vmnet-netifup)
[ 21.159973] /dev/vmnet: port on hub 8 successfully opened
[ 21.164747] /dev/vmnet: open called by PID 4078 (vmnet-dhcpd)
[ 21.164756] /dev/vmnet: port on hub 8 successfully opened
[ 23.223443] init: plymouth-stop pre-start process (4995) terminated with status 1
[ 28.337644] audit_printk_skb: 33 callbacks suppressed
[ 28.337646] type=1400 audit(1374739479.377:41): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=3347 comm="cupsd" pid=3347 comm="cupsd" capability=36 capname="block_suspend"
[ 94.375406] type=1400 audit(1374739545.502:42): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=3347 comm="cupsd" pid=3347 comm="cupsd" capability=36 capname="block_suspend"
[ 95.025975] NVRM: GPU at 0000:01:00: GPU-306e7018-1bef-8e47-52de-e4e2ebaaf8bb
[ 181.958232] type=1400 audit(1374739633.301:43): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=3347 comm="cupsd" pid=3347 comm="cupsd" capability=36 capname="block_suspend"
[ 437.734329] EXT4-fs (sdg3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 617.245856] /dev/vmmon[11119]: PTSC: initialized at 3497972000 Hz using TSC, TSCs are synchronized.
[ 617.309765] /dev/vmmon[11119]: Monitor IPI vector: 0
[ 617.546593] /dev/vmnet: open called by PID 11128 (vmx-vcpu-0)
[ 617.546605] device vlan2100 entered promiscuous mode
[ 617.546606] device eth0 entered promiscuous mode
[ 617.546614] bridge-vlan2100: enabled promiscuous mode
[ 617.546615] /dev/vmnet: port on hub 0 successfully opened
[ 629.041463] /dev/vmnet: open called by PID 11168 (vmx-vcpu-0)
[ 629.041474] /dev/vmnet: port on hub 0 successfully opened
[ 780.538403] /dev/vmnet: open called by PID 11259 (vmx-vcpu-0)
[ 780.538415] /dev/vmnet: hub 11 does not exist, allocating memory.
[ 780.538428] /dev/vmnet: port on hub 11 successfully opened
[ 780.538533] /dev/vmnet: open called by PID 11259 (vmx-vcpu-0)
[ 780.538540] /dev/vmnet: port on hub 0 successfully opened
[ 807.158467] NET: Registered protocol family 39
[ 900.700542] NET: Unregistered protocol family 39
[ 916.370882] usb 3-6: USB disconnect, device number 3
[ 916.370886] usb 3-6.1: USB disconnect, device number 5
[ 916.370888] usb 3-6.1.1: USB disconnect, device number 8
[ 916.372015] usb 3-6.1.3: USB disconnect, device number 9
[ 916.373025] usb 3-6.2: USB disconnect, device number 6
[ 916.437301] usb 3-6.3: USB disconnect, device number 7
[ 1573.719782] type=1400 audit(1374741028.575:44): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=3347 comm="cupsd" pid=3347 comm="cupsd" capability=36 capname="block_suspend"
[ 3909.449628] type=1400 audit(1374743370.194:45): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=3347 comm="cupsd" pid=3347 comm="cupsd" capability=36 capname="block_suspend"
[ 4439.304458] usb 3-6: new high-speed USB device number 10 using xhci_hcd
[ 4439.320534] usb 3-6: New USB device found, idVendor=0424, idProduct=2514
[ 4439.320542] usb 3-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4439.321991] hub 3-6:1.0: USB hub found
[ 4439.322049] hub 3-6:1.0: 3 ports detected
[ 4439.591847] usb 3-6.1: new high-speed USB device number 11 using xhci_hcd
[ 4439.607846] usb 3-6.1: New USB device found, idVendor=0424, idProduct=2640
[ 4439.607855] usb 3-6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4439.608472] hub 3-6.1:1.0: USB hub found
[ 4439.608506] hub 3-6.1:1.0: 3 ports detected
[ 4439.695434] usb 3-6.2: new low-speed USB device number 12 using xhci_hcd
[ 4439.717113] usb 3-6.2: New USB device found, idVendor=046d, idProduct=c051
[ 4439.717115] usb 3-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4439.717116] usb 3-6.2: Product: USB-PS/2 Optical Mouse
[ 4439.717117] usb 3-6.2: Manufacturer: Logitech
[ 4439.717239] usb 3-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4439.721818] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.2/3-6.2:1.0/input/input18
[ 4439.721942] hid-generic 0003:046D:C051.0005: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-6.2/input0
[ 4439.807181] usb 3-6.3: new low-speed USB device number 13 using xhci_hcd
[ 4439.831146] usb 3-6.3: New USB device found, idVendor=045e, idProduct=00b0
[ 4439.831157] usb 3-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4439.831166] usb 3-6.3: Product: Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard
[ 4439.831173] usb 3-6.3: Manufacturer: Microsoft
[ 4439.831406] usb 3-6.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4439.831421] usb 3-6.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4439.834793] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.3/3-6.3:1.0/input/input19
[ 4439.835044] hid-generic 0003:045E:00B0.0006: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard] on usb-0000:00:14.0-6.3/input0
[ 4439.840650] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.3/3-6.3:1.1/input/input20
[ 4439.841108] hid-generic 0003:045E:00B0.0007: input,hidraw3: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard] on usb-0000:00:14.0-6.3/input1
[ 4439.926932] usb 3-6.1.1: new high-speed USB device number 14 using xhci_hcd
[ 4439.966775] usb 3-6.1.1: New USB device found, idVendor=0424, idProduct=4063
[ 4439.966778] usb 3-6.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4439.966779] usb 3-6.1.1: Product: Ultra Fast Media Reader
[ 4439.966780] usb 3-6.1.1: Manufacturer: Generic
[ 4439.966781] usb 3-6.1.1: SerialNumber: 000000264001
[ 4439.967257] scsi13 : usb-storage 3-6.1.1:1.0
[ 4440.038629] usb 3-6.1.3: new full-speed USB device number 15 using xhci_hcd
[ 4440.056806] usb 3-6.1.3: New USB device found, idVendor=1a44, idProduct=0920
[ 4440.056808] usb 3-6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4440.056809] usb 3-6.1.3: Product: DIGIPASS 920
[ 4440.056810] usb 3-6.1.3: Manufacturer: Vasco
[ 4440.056865] usb 3-6.1.3: ep 0x83 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 4440.969639] scsi 13:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.91 PQ: 0 ANSI: 0
[ 4440.970933] sd 13:0:0:0: Attached scsi generic sg8 type 0
[ 4440.978399] sd 13:0:0:0: [sdh] Attached SCSI removable disk
[ 5466.676852] type=1400 audit(1374744931.346:46): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=3347 comm="cupsd" pid=3347 comm="cupsd" capability=36 capname="block_suspend"
[ 6607.423340] usb 3-6: USB disconnect, device number 10
[ 6607.423349] usb 3-6.1: USB disconnect, device number 11
[ 6607.423353] usb 3-6.1.1: USB disconnect, device number 14
[ 6607.426800] usb 3-6.1.3: USB disconnect, device number 15
[ 6607.430230] usb 3-6.2: USB disconnect, device number 12
[ 6607.464650] usb 3-6.3: USB disconnect, device number 13
[12474.059063] type=1400 audit(1374751956.409:47): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=3347 comm="cupsd" pid=3347 comm="cupsd" capability=36 capname="block_suspend"
[14147.341132] type=1400 audit(1374753633.906:48): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=3347 comm="cupsd" pid=3347 comm="cupsd" capability=36 capname="block_suspend"
[31763.221486] usb 3-6: new high-speed USB device number 16 using xhci_hcd
[31763.237639] usb 3-6: New USB device found, idVendor=0424, idProduct=2514
[31763.237641] usb 3-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[31763.238274] hub 3-6:1.0: USB hub found
[31763.238293] hub 3-6:1.0: 3 ports detected
[31763.508843] usb 3-6.1: new high-speed USB device number 17 using xhci_hcd
[31763.524907] usb 3-6.1: New USB device found, idVendor=0424, idProduct=2640
[31763.524916] usb 3-6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[31763.525523] hub 3-6.1:1.0: USB hub found
[31763.525557] hub 3-6.1:1.0: 3 ports detected
[31763.612580] usb 3-6.2: new low-speed USB device number 18 using xhci_hcd
[31763.634281] usb 3-6.2: New USB device found, idVendor=046d, idProduct=c051
[31763.634289] usb 3-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[31763.634295] usb 3-6.2: Product: USB-PS/2 Optical Mouse
[31763.634299] usb 3-6.2: Manufacturer: Logitech
[31763.634536] usb 3-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[31763.639341] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.2/3-6.2:1.0/input/input21
[31763.639681] hid-generic 0003:046D:C051.0008: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-6.2/input0
[31763.724278] usb 3-6.3: new low-speed USB device number 19 using xhci_hcd
[31763.748257] usb 3-6.3: New USB device found, idVendor=045e, idProduct=00b0
[31763.748268] usb 3-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[31763.748274] usb 3-6.3: Product: Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard
[31763.748278] usb 3-6.3: Manufacturer: Microsoft
[31763.748519] usb 3-6.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[31763.748530] usb 3-6.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[31763.752457] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.3/3-6.3:1.0/input/input22
[31763.752637] hid-generic 0003:045E:00B0.0009: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard] on usb-0000:00:14.0-6.3/input0
[31763.758394] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.3/3-6.3:1.1/input/input23
[31763.758651] hid-generic 0003:045E:00B0.000A: input,hidraw3: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard] on usb-0000:00:14.0-6.3/input1
[31763.843995] usb 3-6.1.1: new high-speed USB device number 20 using xhci_hcd
[31763.883874] usb 3-6.1.1: New USB device found, idVendor=0424, idProduct=4063
[31763.883883] usb 3-6.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[31763.883888] usb 3-6.1.1: Product: Ultra Fast Media Reader
[31763.883892] usb 3-6.1.1: Manufacturer: Generic
[31763.883896] usb 3-6.1.1: SerialNumber: 000000264001
[31763.884809] scsi14 : usb-storage 3-6.1.1:1.0
[31763.971608] usb 3-6.1.3: new full-speed USB device number 21 using xhci_hcd
[31763.989827] usb 3-6.1.3: New USB device found, idVendor=1a44, idProduct=0920
[31763.989829] usb 3-6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[31763.989830] usb 3-6.1.3: Product: DIGIPASS 920
[31763.989831] usb 3-6.1.3: Manufacturer: Vasco
[31763.989883] usb 3-6.1.3: ep 0x83 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[31764.886574] scsi 14:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.91 PQ: 0 ANSI: 0
[31764.887209] sd 14:0:0:0: Attached scsi generic sg8 type 0
[31764.894517] sd 14:0:0:0: [sdh] Attached SCSI removable disk
[31857.710928] FS-Cache: Loaded
[31857.717698] FS-Cache: Netfs 'cifs' registered for caching
[31857.717779] Key type cifs.spnego registered
[31857.717794] Key type cifs.idmap registered
[31857.717912] CIFS: no cache= option specified, using "cache=loose". This default will change to "cache=strict" in 3.7.
[31857.722630] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
[51644.734780] usb 3-6: USB disconnect, device number 16
[51644.734782] usb 3-6.1: USB disconnect, device number 17
[51644.734783] usb 3-6.1.1: USB disconnect, device number 20
[51644.735883] usb 3-6.1.3: USB disconnect, device number 21
[51644.738622] usb 3-6.2: USB disconnect, device number 18
[51644.834856] usb 3-6.3: USB disconnect, device number 19
[79165.879959] usb 3-6: new high-speed USB device number 22 using xhci_hcd
[79165.896078] usb 3-6: New USB device found, idVendor=0424, idProduct=2514
[79165.896086] usb 3-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[79165.897491] hub 3-6:1.0: USB hub found
[79165.897525] hub 3-6:1.0: 3 ports detected
[79166.167292] usb 3-6.1: new high-speed USB device number 23 using xhci_hcd
[79166.183328] usb 3-6.1: New USB device found, idVendor=0424, idProduct=2640
[79166.183337] usb 3-6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[79166.183974] hub 3-6.1:1.0: USB hub found
[79166.184029] hub 3-6.1:1.0: 3 ports detected
[79166.270962] usb 3-6.2: new low-speed USB device number 24 using xhci_hcd
[79166.292459] usb 3-6.2: New USB device found, idVendor=046d, idProduct=c051
[79166.292467] usb 3-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[79166.292472] usb 3-6.2: Product: USB-PS/2 Optical Mouse
[79166.292476] usb 3-6.2: Manufacturer: Logitech
[79166.292714] usb 3-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[79166.296680] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.2/3-6.2:1.0/input/input24
[79166.296922] hid-generic 0003:046D:C051.000B: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-6.2/input0
[79166.382743] usb 3-6.3: new low-speed USB device number 25 using xhci_hcd
[79166.407116] usb 3-6.3: New USB device found, idVendor=045e, idProduct=00b0
[79166.407125] usb 3-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[79166.407130] usb 3-6.3: Product: Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard
[79166.407134] usb 3-6.3: Manufacturer: Microsoft
[79166.407374] usb 3-6.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[79166.407384] usb 3-6.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[79166.410953] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.3/3-6.3:1.0/input/input25
[79166.411132] hid-generic 0003:045E:00B0.000C: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard] on usb-0000:00:14.0-6.3/input0
[79166.416768] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.3/3-6.3:1.1/input/input26
[79166.417035] hid-generic 0003:045E:00B0.000D: input,hidraw3: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Pro Keyboard] on usb-0000:00:14.0-6.3/input1
[79166.502394] usb 3-6.1.1: new high-speed USB device number 26 using xhci_hcd
[79166.542315] usb 3-6.1.1: New USB device found, idVendor=0424, idProduct=4063
[79166.542324] usb 3-6.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[79166.542329] usb 3-6.1.1: Product: Ultra Fast Media Reader
[79166.542333] usb 3-6.1.1: Manufacturer: Generic
[79166.542337] usb 3-6.1.1: SerialNumber: 000000264001
[79166.543348] scsi15 : usb-storage 3-6.1.1:1.0
[79166.630040] usb 3-6.1.3: new full-speed USB device number 27 using xhci_hcd
[79166.648487] usb 3-6.1.3: New USB device found, idVendor=1a44, idProduct=0920
[79166.648495] usb 3-6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[79166.648501] usb 3-6.1.3: Product: DIGIPASS 920
[79166.648505] usb 3-6.1.3: Manufacturer: Vasco
[79166.648699] usb 3-6.1.3: ep 0x83 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[79167.545064] scsi 15:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.91 PQ: 0 ANSI: 0
[79167.546886] sd 15:0:0:0: Attached scsi generic sg8 type 0
[79167.555209] sd 15:0:0:0: [sdh] Attached SCSI removable disk