dmesg - linuxkerlenteszt
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-26-generic (buildd@panlong) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #38-Ubuntu SMP Mon Jun 17 21:43:33 UTC 2013 (Ubuntu 3.8.0-26.38-generic 3.8.13.2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007ffaffff] usable
BIOS-e820: [mem 0x000000007ffb0000-0x000000007ffbffff] ACPI data
BIOS-e820: [mem 0x000000007ffc0000-0x000000007ffeffff] ACPI NVS
BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./4CoreDual-VSTA, BIOS P1.40 01/30/2007
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP bridge at 00:00:00
Aperture from AGP @ f8000000 old size 32 MB
Aperture from AGP @ f8000000 size 64 MB (APSIZE f30)
e820: last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x7ffaffff]
[mem 0x00000000-0x7fdfffff] page 2M
[mem 0x7fe00000-0x7ffaffff] page 4k
kernel direct mapping tables up to 0x7ffaffff @ [mem 0x1fffc000-0x1fffffff]
RAMDISK: [mem 0x3611c000-0x37085fff]
ACPI: RSDP 00000000000f7df0 00014 (v00 ACPIAM)
ACPI: RSDT 000000007ffb0000 00034 (v01 A M I OEMRSDT 01000730 MSFT 00000097)
ACPI: FACP 000000007ffb0200 00084 (v02 A M I OEMFACP 01000730 MSFT 00000097)
ACPI: DSDT 000000007ffb0450 04AED (v01 4CDVT 4CDVT131 00000131 INTL 02002026)
ACPI: FACS 000000007ffc0000 00040
ACPI: APIC 000000007ffb0390 00078 (v01 A M I OEMAPIC 01000730 MSFT 00000097)
ACPI: MCFG 000000007ffb0410 0003C (v01 A M I OEMMCFG 01000730 MSFT 00000097)
ACPI: OEMB 000000007ffc0040 00051 (v01 A M I AMI_OEM 01000730 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007ffaffff]
Initmem setup node 0 [mem 0x00000000-0x7ffaffff]
NODE_DATA [mem 0x7ffab000-0x7ffaffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0x7ffaffff]
On node 0 totalpages: 524095
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 8127 pages used for memmap
DMA32 zone: 511985 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
e820: [mem 0x80000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s85056 r8192 d21440 u524288
pcpu-alloc: s85056 r8192 d21440 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515898
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
AGP bridge at 00:00:00
Aperture from AGP @ f8000000 old size 32 MB
Aperture from AGP @ f8000000 size 64 MB (APSIZE f30)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2031556k/2096832k available (7010k kernel code, 452k absent, 64824k reserved, 6232k data, 996k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
NR_IRQS:16640 nr_irqs:1024 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Fast TSC calibration using PIT
tsc: Detected 2306.247 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4612.49 BogoMIPS (lpj=9224988)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26697 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (fam: 06, model: 0f, stepping: 06)
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
smpboot: Booting Node 0, Processors #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (9224.98 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7ffc0000-0x7ffeffff] (196608 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfff7ffff] (ignored)
PCI: root bus 00: using default resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-7f]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [1106:0308] type 00 class 0x060000
pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
pci 0000:00:00.1: [1106:1308] type 00 class 0x060000
pci 0000:00:00.2: [1106:2308] type 00 class 0x060000
pci 0000:00:00.3: [1106:3208] type 00 class 0x060000
pci 0000:00:00.4: [1106:4308] type 00 class 0x060000
pci 0000:00:00.5: [1106:5308] type 00 class 0x080020
pci 0000:00:00.7: [1106:7308] type 00 class 0x060000
pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
pci 0000:00:02.0: [1106:a208] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: [10ec:8169] type 00 class 0x020000
pci 0000:00:0b.0: reg 10: [io 0xc400-0xc4ff]
pci 0000:00:0b.0: reg 14: [mem 0xf7fff400-0xf7fff4ff]
pci 0000:00:0b.0: reg 30: [mem 0xf7fc0000-0xf7fdffff pref]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:0c.0: [13f6:8788] type 00 class 0x040100
pci 0000:00:0c.0: reg 10: [io 0xc800-0xc8ff]
pci 0000:00:0c.0: supports D1 D2
pci 0000:00:0f.0: [1106:0591] type 00 class 0x01018f
pci 0000:00:0f.0: reg 10: [io 0xe000-0xe007]
pci 0000:00:0f.0: reg 14: [io 0xdc00-0xdc03]
pci 0000:00:0f.0: reg 18: [io 0xd880-0xd887]
pci 0000:00:0f.0: reg 1c: [io 0xd800-0xd803]
pci 0000:00:0f.0: reg 20: [io 0xd480-0xd48f]
pci 0000:00:0f.0: reg 24: [io 0xd000-0xd0ff]
pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f]
pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.0: reg 20: [io 0xe080-0xe09f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.1: reg 20: [io 0xe400-0xe41f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.2: reg 20: [io 0xe480-0xe49f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.3: reg 20: [io 0xec00-0xec1f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
pci 0000:00:10.4: reg 10: [mem 0xf7fff800-0xf7fff8ff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:11.0: [1106:3337] type 00 class 0x060100
pci 0000:00:11.7: [1106:287e] type 00 class 0x060000
pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
pci 0000:00:12.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:00:12.0: reg 14: [mem 0xf7fffc00-0xf7fffcff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: [1106:337b] type 00 class 0x060000
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xf1c00000-0xf1cfffff]
pci 0000:02:00.0: [10de:0614] type 00 class 0x030000
pci 0000:02:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0xbc00-0xbc7f]
pci 0000:02:00.0: reg 30: [mem 0xf7de0000-0xf7dfffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:02.0: bridge window [mem 0xf1d00000-0xf7dfffff]
pci 0000:00:02.0: bridge window [mem 0xbff00000-0xdfefffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xfffffff0-0xffffffff] (ignored)
PCI: root bus 80: using default resources
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [bus 80-ff]
pci_bus 0000:80: root bus resource [io 0x0000-0xffff]
pci_bus 0000:80: root bus resource [mem 0x00000000-0xfffffffff]
pci0000:80: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:80: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7ffb0000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:05: [dma 3]
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
system 00:06: [io 0x0295-0x0296] has been reserved
system 00:06: [io 0x03e0-0x03e7] has been reserved
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:06: [io 0x0400-0x041f] has been reserved
system 00:06: [mem 0xfffffff0-0xffffffff] has been reserved
system 00:06: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0a: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:0a: [mem 0xfff80000-0xffffffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xf1c00000-0xf1cfffff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:02.0: bridge window [mem 0xf1d00000-0xf7dfffff]
pci 0000:00:02.0: bridge window [mem 0xbff00000-0xdfefffff pref]
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 1 [mem 0xf1c00000-0xf1cfffff]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xf1d00000-0xf7dfffff]
pci_bus 0000:02: resource 2 [mem 0xbff00000-0xdfefffff pref]
pci_bus 0000:80: resource 4 [io 0x0000-0xffff]
pci_bus 0000:80: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:02:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15784k freed
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1373549921.459:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 3998
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 64 for MSI/MSI-X
aer 0000:00:02.0:pcie02: service driver aer loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:00.5 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:02.0:pcie04: HPC vendor_id 1106 device_id a208 ss_vid 0 ss_did 0
pciehp 0000:00:02.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
agpgart: Detected VIA PT880 Ultra chipset
agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:10.4: EHCI Host Controller
ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:10.4: irq 21, io mem 0xf7fff800
ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-26-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:10.4
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e080
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-26-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e400
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-26-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e480
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-26-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 23, io base 0x0000ec00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-26-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:10.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 28bf685926cf24167b29d0d66d07256be256431c'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:01: setting system clock to 2013-07-11 13:38:42 UTC (1373549922)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 996k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1172k freed
Freeing unused kernel memory: 1080k freed
udevd[94]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:00:0b.0: PCI: Disallowing DAC for device
r8169 0000:00:0b.0 (unregistered net_device): not PCI Express
r8169 0000:00:0b.0 eth0: RTL8169sb/8110sb at 0xffffc90000306400, a0:f3:c1:10:2c:50, XID 10000000 IRQ 19
r8169 0000:00:0b.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
sata_via 0000:00:0f.0: version 2.6
sata_via 0000:00:0f.0: routed to hard irq line 5
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd480 irq 21
ata2: SATA max UDMA/133 cmd 0xd880 ctl 0xd800 bmdma 0xd488 irq 21
pata_via 0000:00:0f.1: version 0.3.4
scsi2 : pata_via
scsi3 : pata_via
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
via-rhine 0000:00:12.0 eth1: VIA Rhine II at 0xf7fffc00, 00:19:66:10:a1:6b, IRQ 23
via-rhine 0000:00:12.0 eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1
Disabling lock debugging due to kernel taint
FDC 0 is a post-1991 82077
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=0930, idProduct=6540
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: TransMemory
usb 1-1: Manufacturer: TOSHIBA
usb 1-1: SerialNumber: 0660FB6162D2ABE2
Initializing USB Mass Storage driver...
scsi4 : usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata1.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 > sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: TSSTcorp CDDVDW SH-224BB, SB00, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224BB SB00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
tsc: Refined TSC clocksource calibration: 2306.216 MHz
Switching to clocksource tsc
usb 2-2: new full-speed USB device number 2 using uhci_hcd
usb 2-2: New USB device found, idVendor=046d, idProduct=c52b
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB Receiver
usb 2-2: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.0-2/input2
input: Logitech Unifying Device. Wireless PID:4024 as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/input/input2
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-0000:00:10.0-2:1
scsi 4:0:0:0: Direct-Access TOSHIBA TransMemory 6.50 PQ: 0 ANSI: 0 CCS
scsi 4:0:0:1: CD-ROM TOSHIBA TransMemory 6.50 PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 1943519 512-byte logical blocks: (995 MB/948 MiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08
sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
sr 4:0:0:1: Attached scsi CD-ROM sr1
sr 4:0:0:1: Attached scsi generic sg3 type 5
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
usb 3-2: new low-speed USB device number 2 using uhci_hcd
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 3-2: New USB device found, idVendor=0b38, idProduct=0010
usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 0b38:0010 as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input3
hid-generic 0003:0B38:0010.0005: input,hidraw2: USB HID v1.10 Keyboard [HID 0b38:0010] on usb-0000:00:10.1-2/input0
input: HID 0b38:0010 as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.1/input/input4
hid-generic 0003:0B38:0010.0006: input,hidraw3: USB HID v1.10 Device [HID 0b38:0010] on usb-0000:00:10.1-2/input1
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1179659
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1179658
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1179657
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1179656
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1179654
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1179655
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1179652
EXT4-fs (sda1): 7 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 4-1: new low-speed USB device number 2 using uhci_hcd
usb 4-1: New USB device found, idVendor=045e, idProduct=008c
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: Microsoft Wireless Optical Mouse\xffffffc2\xffffffae\xffffffae 1.0A
usb 4-1: Manufacturer: Microsoft
input: Microsoft Microsoft Wireless Optical Mouse\xffffffc2\xffffffae\xffffffae 1.0A as /devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/input/input5
hid-generic 0003:045E:008C.0007: input,hidraw4: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse\xffffffc2\xffffffae\xffffffae 1.0A] on usb-0000:00:10.2-1/input0
Adding 3905532k swap on /dev/sda5. Priority:-1 extents:1 across:3905532k
Adding 969724k swap on /dev/sdb1. Priority:-2 extents:1 across:969724k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
udevd[384]: starting version 175
type=1400 audit(1373549936.893:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=548 comm="apparmor_parser"
type=1400 audit(1373549936.893:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=548 comm="apparmor_parser"
type=1400 audit(1373549936.893:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=548 comm="apparmor_parser"
type=1400 audit(1373549936.897:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=614 comm="apparmor_parser"
type=1400 audit(1373549936.897:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=549 comm="apparmor_parser"
type=1400 audit(1373549936.897:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=614 comm="apparmor_parser"
type=1400 audit(1373549936.897:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=549 comm="apparmor_parser"
type=1400 audit(1373549936.897:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=614 comm="apparmor_parser"
type=1400 audit(1373549936.897:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=549 comm="apparmor_parser"
lp: driver loaded but no devices found
microcode: CPU0 sig=0x6f6, pf=0x1, revision=0x44
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
microcode: CPU1 sig=0x6f6, pf=0x1, revision=0x44
ppdev: user-space parallel port driver
microcode: Microcode Update Driver: v2.00 , Peter Oruba
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
nvidia: module license 'NVIDIA' taints kernel.
lp0: using parport0 (interrupt-driven).
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:02:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 319.32 Wed Jun 19 15:51:20 PDT 2013
sr 4:0:0:1: GET_EVENT and TUR disagree continuously, suppress GET_EVENT events
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 25297342
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 25305467
EXT4-fs (sda3): 2 orphan inodes deleted
EXT4-fs (sda3): recovery complete
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (859) killed by TERM signal
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf5000000, mapped to 0xffffc90010600000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: avahi-cups-reload main process (968) terminated with status 1
type=1400 audit(1373549940.329:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=981 comm="apparmor_parser"
r8169 0000:00:0b.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x2d9 offMax=0xcf0
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.12 (interface 0x001a0004).
vboxpci: IOMMU not found (not registered)
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
show_signal_msg: 70 callbacks suppressed
nvclock_gtk[4849]: segfault at 0 ip (null) sp 00007ffff455c408 error 14 in nvclock_gtk[400000+66000]
nvclock_gtk[5604]: segfault at 0 ip (null) sp 00007fff42c7a478 error 14 in nvclock_gtk[400000+66000]
systemd-hostnamed[6485]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
bio: create slab at 1
AVX instructions are not detected.
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
systemd-hostnamed[8296]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[9854]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[9923]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[10787]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[11606]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
loop0: unknown partition table
loop1: unknown partition table
loop2: unknown partition table
UDF-fs: warning (device loop3): udf_load_vrs: No anchor found
UDF-fs: Rescanning with blocksize 2048
UDF-fs: warning (device loop3): udf_load_vrs: No anchor found
UDF-fs: warning (device loop3): udf_fill_super: No partition found (1)
UDF-fs: warning (device loop3): udf_load_vrs: No anchor found
UDF-fs: Rescanning with blocksize 2048
UDF-fs: warning (device loop3): udf_load_vrs: No anchor found
UDF-fs: warning (device loop3): udf_fill_super: No partition found (1)
ISOFS: Unable to identify CD-ROM format.
UDF-fs: warning (device loop3): udf_load_vrs: No anchor found
UDF-fs: Rescanning with blocksize 2048
UDF-fs: warning (device loop3): udf_load_vrs: No anchor found
UDF-fs: warning (device loop3): udf_fill_super: No partition found (1)
UDF-fs: warning (device loop3): udf_load_vrs: No anchor found
UDF-fs: Rescanning with blocksize 2048
UDF-fs: warning (device loop3): udf_load_vrs: No anchor found
UDF-fs: warning (device loop3): udf_fill_super: No partition found (1)
bio: create slab at 1
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
systemd-hostnamed[30041]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
crafty[10134]: segfault at 0 ip 00007f4493d1b580 sp 00007fff6b0314a8 error 4 in libc-2.17.so[7f4493ca9000+1be000]
crafty[10139]: segfault at 0 ip 00007f92880c1580 sp 00007fffc0927838 error 4 in libc-2.17.so[7f928804f000+1be000]
crafty[10145]: segfault at 0 ip 00007fe9f87d2580 sp 00007fff922bc4e8 error 4 in libc-2.17.so[7fe9f8760000+1be000]