dmesg - gcc-graphite-gzip

Return To gcc-graphite-gzip System Information

ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf414000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf5cd000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x43f800000-0x43fffffff]
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:09: [io  0x0400-0x0453] has been reserved
system 00:09: [io  0x0458-0x047f] has been reserved
system 00:09: [io  0x0500-0x057f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:0a: [io  0x0454-0x0457] has been reserved
system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.6: PCI bridge to [bus 04]
pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.6:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:00:1c.7: PCI bridge to [bus 05-06]
pci 0000:05:00.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0xc0000000-0xffffffff]
pci_bus 0000:06: resource 8 [io  0x0000-0x0cf7]
pci_bus 0000:06: resource 9 [io  0x0d00-0xffff]
pci_bus 0000:06: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 11 [mem 0xc0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2804k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb414000-0xbf414000] (64MB) mapped at [ffff8800bb414000-ffff8800bf413fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1373104377.410:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Btrfs loaded
msgmni has been set to 32026
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.6: irq 43 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: irq 44 for MSI/MSI-X
r8169 0000:04:00.0 eth0: RTL8168e/8111e at 0xffffc9000002a000, c8:60:00:56:a8:04, XID 0c200000 IRQ 44
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
TCP: cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Freeing unused kernel memory: 792k freed
BFS CPU scheduler v0.430 by Con Kolivas.
ACPI: bus type ATA registered
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705100 irq 45
ata2: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705180 irq 45
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705380 irq 45
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-8: ST1000DM003-9YN162, CC4C, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata6.00: ATAPI: PIONEER BD-RW   BDR-206D, 1.05, max UDMA/100
ata6.00: configured for UDMA/100
ata1.00: ATA-8: OCZ-AGILITY3, 2.15, max UDMA/133
ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      OCZ-AGILITY3     2.15 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access     ATA      ST1000DM003-9YN1 CC4C PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 5:0:0:0: CD-ROM            PIONEER  BD-RW   BDR-206D 1.05 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
 sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3411.482 MHz
Switching to clocksource tsc
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 5:0:0:0: Attached scsi generic sg2 type 5
scsi:  Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
imm: Version 2.05 (for Linux 2.4.0)
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
Adaptec aacraid driver 1.2-0[30000]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.04.00.13-k.
Emulex LightPulse Fibre Channel SCSI driver 8.3.37
Copyright(c) 2004-2009 Emulex.  All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
md: linear personality registered for level -1
md: multipath personality registered for level -4
Loading iSCSI transport class v2.0-870.
device fsid 4b926a8c-cc1d-49d5-a8ae-9b3461461a8f devid 1 transid 666 /dev/sda5
btrfs: disk space caching is enabled
Btrfs detected SSD devices, enabling SSD mode
udevd[16067]: starting version 171
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x1a
input: PC Speaker as /devices/platform/pcspkr/input/input0
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xfe707000
parport_pc 00:02: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP]
[drm] Initialized drm 1.1.0 20060810
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x1a
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.9.7-ck ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x1a
microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x1a
microcode: Microcode Update Driver: v2.00 , Peter Oruba
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe706000
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x174B:0xE164).
[drm] register mmio base: 0xFE620000
[drm] register mmio size: 131072
ATOM BIOS: C26401
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone  kernel: Available graphics memory: 8199282 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.9.7-ck ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
radeon 0000:01:00.0: radeon_uvd: Can't load firmware "radeon/SUMO_uvd.bin"
[drm] GART: num cpu pages 131072, num gpu pages 131072
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] Loading CAICOS Microcode
ni_cp: Failed to load firmware "radeon/CAICOS_pfp.bin"
[drm:evergreen_startup] *ERROR* Failed to load firmware!
radeon 0000:01:00.0: disabling GPU acceleration
radeon 0000:01:00.0: ffff880428c12c00 unpin not necessary
radeon 0000:01:00.0: ffff880428c12c00 unpin not necessary
[drm:evergreen_init] *ERROR* radeon: MC ucode required for NI+.
radeon 0000:01:00.0: Fatal error during GPU init
[drm] radeon: finishing device.
[TTM] Finalizing pool allocator
[TTM] Finalizing DMA pool allocator
[TTM] Zone  kernel: Used memory at exit: 0 kiB
[TTM] Zone   dma32: Used memory at exit: 0 kiB
[drm] radeon: ttm finalized
radeon: probe of 0000:01:00.0 failed with error -22
snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
ppdev: user-space parallel port driver
btrfs: use zlib compression
btrfs: disk space caching is enabled
Adding 2097148k swap on /dev/sda2.  Priority:-1 extents:1 across:2097148k SS
device fsid 5e8c2778-bcaa-40dd-a65e-5425ca26a04e devid 1 transid 25 /dev/sda1
btrfs: use zlib compression
btrfs: disk space caching is enabled
Btrfs detected SSD devices, enabling SSD mode
device fsid 0abf8b49-e296-4c61-871f-27a2685dc3b6 devid 1 transid 859 /dev/sda3
btrfs: use zlib compression
btrfs: disk space caching is enabled
Btrfs detected SSD devices, enabling SSD mode
device fsid 1d574394-41ff-4de4-9348-05e86a1e40a0 devid 1 transid 22 /dev/sda6
usb 1-1: new high-speed USB device number 2 using ehci-pci
btrfs: use zlib compression
btrfs: disk space caching is enabled
Btrfs detected SSD devices, enabling SSD mode
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
r8169 0000:04:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
r8169 0000:04:00.0 eth0: link down
r8169 0000:04:00.0 eth0: link down
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 2-1.5: new low-speed USB device number 3 using ehci-pci
usb 2-1.5: New USB device found, idVendor=046d, idProduct=c31c
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: Product: USB Keyboard
usb 2-1.5: Manufacturer: Logitech
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input3
hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.5/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input4
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.5/input1
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:04:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
gsettings[17482]: segfault at 10 ip 00007ff18646d7d3 sp 00007fff706d61d8 error 6 in libgio-2.0.so.0.3400.3[7ff1863c7000+155000]
gsettings[17485]: segfault at 10 ip 00007f73d91547d3 sp 00007fff7bd0d728 error 6 in libgio-2.0.so.0.3400.3[7f73d90ae000+155000]
gsettings[17743]: segfault at 10 ip 00007f03185167d3 sp 00007fff9d0eac28 error 6 in libgio-2.0.so.0.3400.3[7f0318470000+155000]
gsettings[17745]: segfault at 10 ip 00007ff5819957d3 sp 00007fff89a997c8 error 6 in libgio-2.0.so.0.3400.3[7ff5818ef000+155000]
gsettings[17981]: segfault at 10 ip 00007f40660da7d3 sp 00007fffce2cc7a8 error 6 in libgio-2.0.so.0.3400.3[7f4066034000+155000]
gsettings[17983]: segfault at 10 ip 00007fe0edbff7d3 sp 00007ffff7556ef8 error 6 in libgio-2.0.so.0.3400.3[7fe0edb59000+155000]
gsettings[18191]: segfault at 10 ip 00007f07aa3417d3 sp 00007fff6efb9018 error 6 in libgio-2.0.so.0.3400.3[7f07aa29b000+155000]
gsettings[18193]: segfault at 10 ip 00007f99644c17d3 sp 00007fffe29915d8 error 6 in libgio-2.0.so.0.3400.3[7f996441b000+155000]
gsettings[18396]: segfault at 10 ip 00007f4f8e99b7d3 sp 00007fff59d90d98 error 6 in libgio-2.0.so.0.3400.3[7f4f8e8f5000+155000]
gsettings[18398]: segfault at 10 ip 00007f27269287d3 sp 00007fff2d457738 error 6 in libgio-2.0.so.0.3400.3[7f2726882000+155000]
gsettings[18642]: segfault at 10 ip 00007f75c0c0c7d3 sp 00007fff9bc43a48 error 6 in libgio-2.0.so.0.3400.3[7f75c0b66000+155000]
gsettings[18644]: segfault at 10 ip 00007faec9f0f7d3 sp 00007fffa7bae058 error 6 in libgio-2.0.so.0.3400.3[7faec9e69000+155000]
gsettings[18700]: segfault at 10 ip 00007f6de8a3d7d3 sp 00007fffd305d5c8 error 6 in libgio-2.0.so.0.3400.3[7f6de8997000+155000]
gsettings[18702]: segfault at 10 ip 00007fd356ea47d3 sp 00007fffbba264f8 error 6 in libgio-2.0.so.0.3400.3[7fd356dfe000+155000]

Return To gcc-graphite-gzip System Information