dmesg - testconf
Initializing cgroup subsys cpu
Linux version 3.4.48 (root@hm0000) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Wed Jun 12 01:26:49 JST 2013
Command line: ro root=LABEL=root rd_NO_LUKS rd_NO_MD quiet KEYBOARDTYPE=pc KEYTABLE=jp106 LANG=ja_JP.UTF-8 rd_NO_LVM rd_NO_DM crashkernel=auto xhci_hcd.enable=1 vga=791
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000099c00 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-MA790GP-DS4H/GA-MA790GP-DS4H, BIOS F7i 12/24/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x430000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CFF00000 mask FFFFFFF00000 uncachable
4 base 000100000000 mask FFFF00000000 write-back
5 base 000200000000 mask FFFE00000000 write-back
6 base 000400000000 mask FFFFE0000000 write-back
7 base 000420000000 mask FFFFF0000000 write-back
TOM2: 0000000430000000 aka 17152M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3327MB, range: 1MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
reg 6, base: 16GB, range: 512MB, type WB
reg 7, base: 16896MB, range: 256MB, type WB
total RAM covered: 3327M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3327MB, range: 1MB, type UC
e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000097000] 97000 size 8192
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cfee0000
0000000000 - 00c0000000 page 1G
00c0000000 - 00cfe00000 page 2M
00cfe00000 - 00cfee0000 page 4k
kernel direct mapping tables up to 0xcfedffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: 0000000100000000-0000000430000000
0100000000 - 0400000000 page 1G
0400000000 - 0430000000 page 2M
kernel direct mapping tables up to 0x42fffffff @ [mem 0xcfede000-0xcfedffff]
RAMDISK: 37b84000 - 37ff0000
crashkernel: memory value expected
ACPI: RSDP 00000000000f7550 00014 (v00 GBT )
ACPI: RSDT 00000000cfee3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfee30c0 07673 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfee0000 00040
ACPI: SSDT 00000000cfeea800 012F6 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET 00000000cfeebb00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfeebb40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 00000000cfeea740 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f600000-ffff88042f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00430000
Movable zone start PFN for each node
Early memory PFN ranges
0: 0x00000010 -> 0x00000099
0: 0x00000100 -> 0x000cfee0
0: 0x00100000 -> 0x00430000
On node 0 totalpages: 4193897
DMA zone: 64 pages used for memmap
DMA zone: 2 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 831264 pages, LIFO batch:31
Normal zone: 52224 pages used for memmap
Normal zone: 3290112 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
SMP: Allowing 6 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
setup_percpu: NR_CPUS:6 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88042fc00000 s72576 r8192 d21632 u262144
pcpu-alloc: s72576 r8192 d21632 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4125287
Kernel command line: ro root=LABEL=root rd_NO_LUKS rd_NO_MD quiet KEYBOARDTYPE=pc KEYTABLE=jp106 LANG=ja_JP.UTF-8 rd_NO_LVM rd_NO_DM crashkernel=auto xhci_hcd.enable=1 vga=791
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 40c0000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
Memory: 16343004k/17563648k available (5690k kernel code, 788060k absent, 432584k reserved, 2230k data, 544k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:728 16
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3214.498 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6431.87 BogoMIPS (lpj=10714993)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
tseg: 00cff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
using AMD E400 aware idle routine
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20120320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
MCE: In-kernel MCE decoding enabled.
Booting Node 0, Processors #1
System has AMD C1E enabled
#2
Switch to broadcast mode on CPU1
#3
Switch to broadcast mode on CPU2
#4
Switch to broadcast mode on CPU3
#5 Ok.
Switch to broadcast mode on CPU4
Brought up 6 CPUs
Total of 6 processors activated (38589.22 BogoMIPS).
Switch to broadcast mode on CPU5
Switch to broadcast mode on CPU0
devtmpfs: initialized
NET: Registered protocol family 16
node 0 link 0: io port [9000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff]
TOM2: 0000000430000000 aka 17152M
bus: [00, 06] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
bus: 00 index 3 [mem 0xe0700000-0xffffffff]
bus: 00 index 4 [mem 0xe0100000-0xe06fffff]
bus: 00 index 5 [mem 0x430000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [10de:104a] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xde000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xaf00-0xaf7f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1095:3132] type 00 class 0x018000
pci 0000:02:00.0: reg 10: [mem 0xfd6ff000-0xfd6ff07f 64bit]
pci 0000:02:00.0: reg 18: [mem 0xfd6f8000-0xfd6fbfff 64bit]
pci 0000:02:00.0: reg 20: [io 0xef00-0xef7f]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:06.0: PCI bridge to [bus 02-02]
pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
pci 0000:00:06.0: bridge window [mem 0xfd600000-0xfd6fffff]
pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:03:00.0: [1095:3132] type 00 class 0x018000
pci 0000:03:00.0: reg 10: [mem 0xfdeff000-0xfdeff07f 64bit]
pci 0000:03:00.0: reg 18: [mem 0xfdef8000-0xfdefbfff 64bit]
pci 0000:03:00.0: reg 20: [io 0xdf00-0xdf7f]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:04:00.0: reg 10: [mem 0xfdcfe000-0xfdcfffff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot
pci 0000:00:09.0: PCI bridge to [bus 04-04]
pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:09.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 10: [io 0xbe00-0xbeff]
pci 0000:05:00.0: reg 18: [mem 0xfd9ff000-0xfd9fffff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xfd9e0000-0xfd9effff 64bit pref]
pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 05-05]
pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0a.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:06:06.0: [1095:3114] type 00 class 0x010400
pci 0000:06:06.0: reg 10: [io 0x9f00-0x9f07]
pci 0000:06:06.0: reg 14: [io 0x9e00-0x9e03]
pci 0000:06:06.0: reg 18: [io 0x9d00-0x9d07]
pci 0000:06:06.0: reg 1c: [io 0x9c00-0x9c03]
pci 0000:06:06.0: reg 20: [io 0x9b00-0x9b0f]
pci 0000:06:06.0: reg 24: [mem 0xfd8ff000-0xfd8ff3ff]
pci 0000:06:06.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:06:06.0: supports D1 D2
pci 0000:06:07.0: [1033:0035] type 00 class 0x0c0310
pci 0000:06:07.0: reg 10: [mem 0xfd8fe000-0xfd8fefff]
pci 0000:06:07.0: supports D1 D2
pci 0000:06:07.0: PME# supported from D0 D1 D2 D3hot
pci 0000:06:07.1: [1033:0035] type 00 class 0x0c0310
pci 0000:06:07.1: reg 10: [mem 0xfd8fd000-0xfd8fdfff]
pci 0000:06:07.1: supports D1 D2
pci 0000:06:07.1: PME# supported from D0 D1 D2 D3hot
pci 0000:06:07.2: [1033:00e0] type 00 class 0x0c0320
pci 0000:06:07.2: reg 10: [mem 0xfd8fc000-0xfd8fc0ff]
pci 0000:06:07.2: supports D1 D2
pci 0000:06:07.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.4: PCI bridge to [bus 06-06] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
pci 0000:00:14.4: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
reserve RAM buffer: 0000000000099c00 - 000000000009ffff
reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xd0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0022-0x003f]
pnp 00:01: [io 0x0044-0x005f]
pnp 00:01: [io 0x0062-0x0063]
pnp 00:01: [io 0x0065-0x006f]
pnp 00:01: [io 0x0074-0x007f]
pnp 00:01: [io 0x0091-0x0093]
pnp 00:01: [io 0x00a2-0x00bf]
pnp 00:01: [io 0x00e0-0x00ef]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0220-0x0225]
pnp 00:01: [io 0x0290-0x0294]
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0220-0x0225] has been reserved
system 00:01: [io 0x0290-0x0294] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x4100-0x411f]
pnp 00:02: [io 0x0228-0x022f]
pnp 00:02: [io 0x040b]
pnp 00:02: [io 0x04d6]
pnp 00:02: [io 0x0c00-0x0c01]
pnp 00:02: [io 0x0c14]
pnp 00:02: [io 0x0c50-0x0c52]
pnp 00:02: [io 0x0c6c-0x0c6d]
pnp 00:02: [io 0x0c6f]
pnp 00:02: [io 0x0cd0-0x0cd1]
pnp 00:02: [io 0x0cd2-0x0cd3]
pnp 00:02: [io 0x0cd4-0x0cdf]
pnp 00:02: [io 0x4000-0x40fe]
pnp 00:02: [io 0x4210-0x4217]
pnp 00:02: [io 0x0b00-0x0b0f]
pnp 00:02: [io 0x0b10-0x0b1f]
pnp 00:02: [io 0x0b20-0x0b3f]
pnp 00:02: [mem 0x00000000-0x00000fff window]
pnp 00:02: [mem 0xfee00400-0xfee00fff window]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:05:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:06:06.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
system 00:02: [io 0x4100-0x411f] has been reserved
system 00:02: [io 0x0228-0x022f] has been reserved
system 00:02: [io 0x040b] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c52] has been reserved
system 00:02: [io 0x0c6c-0x0c6d] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cd1] has been reserved
system 00:02: [io 0x0cd2-0x0cd3] has been reserved
system 00:02: [io 0x0cd4-0x0cdf] has been reserved
system 00:02: [io 0x4000-0x40fe] has been reserved
system 00:02: [io 0x4210-0x4217] has been reserved
system 00:02: [io 0x0b00-0x0b0f] has been reserved
system 00:02: [io 0x0b10-0x0b1f] has been reserved
system 00:02: [io 0x0b20-0x0b3f] has been reserved
system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0080-0x0090]
pnp 00:03: [io 0x0094-0x009f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [mem 0xe0000000-0xefffffff]
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0x000dd000-0x000dffff]
pnp 00:0a: [mem 0x000f0000-0x000f7fff]
pnp 00:0a: [mem 0x000f8000-0x000fbfff]
pnp 00:0a: [mem 0x000fc000-0x000fffff]
pnp 00:0a: [mem 0xcfee0000-0xcfeeffff]
pnp 00:0a: [mem 0xffff0000-0xffffffff]
pnp 00:0a: [mem 0x00000000-0x0009ffff]
pnp 00:0a: [mem 0x00100000-0xcfedffff]
pnp 00:0a: [mem 0xcfef0000-0xcfefffff]
pnp 00:0a: [mem 0xcff00000-0xcfffffff]
pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
pnp 00:0a: [mem 0xfff80000-0xfffeffff]
pnp 00:0a: disabling [mem 0x000dd000-0x000dffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x00100000-0xcfedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xe00fffff]; adding more reservations
system 00:0a: [mem 0xcfee0000-0xcfeeffff] could not be reserved
system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0a: [mem 0xcfef0000-0xcfefffff] has been reserved
system 00:0a: [mem 0xcff00000-0xcfffffff] could not be reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd807ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf7ffff pref]
pci 0000:00:06.0: PCI bridge to [bus 02-02]
pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
pci 0000:00:06.0: bridge window [mem 0xfd600000-0xfd6fffff]
pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd7ffff pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 04-04]
pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:09.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0xfd900000-0xfd90ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 05-05]
pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0a.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:06:06.0: BAR 6: assigned [mem 0xfd700000-0xfd77ffff pref]
pci 0000:00:14.4: PCI bridge to [bus 06-06]
pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
pci 0000:00:14.4: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfd600000-0xfd6fffff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff]
pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:06: resource 1 [mem 0xfd800000-0xfd8fffff]
pci_bus 0000:06: resource 2 [mem 0xfd700000-0xfd7fffff pref]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:06: resource 8 [mem 0xd0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 4528k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
microcode: CPU0: patch_level=0x010000bf
microcode: CPU1: patch_level=0x010000bf
microcode: CPU2: patch_level=0x010000bf
microcode: CPU3: patch_level=0x010000bf
microcode: CPU4: patch_level=0x010000bf
microcode: CPU5: patch_level=0x010000bf
microcode: Microcode Update Driver: v2.00 , Peter Oruba
audit: initializing netlink socket (disabled)
type=2000 audit(1371261174.843:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.18)
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 32057
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
pcieport 0000:00:09.0: irq 43 for MSI/MSI-X
pcieport 0000:00:0a.0: irq 44 for MSI/MSI-X
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xdf000000, mapped to 0xffffc90010100000, using 3072k, total 14336k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: processor limited to max C-state 1
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
sata_sil24 0000:02:00.0: version 1.1
scsi4 : sata_sil24
scsi5 : sata_sil24
ata5: SATA max UDMA/100 host m128@0xfd6ff000 port 0xfd6f8000 irq 18
ata6: SATA max UDMA/100 host m128@0xfd6ff000 port 0xfd6fa000 irq 18
scsi6 : sata_sil24
scsi7 : sata_sil24
ata7: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdef8000 irq 19
ata8: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdefa000 irq 19
sata_sil 0000:06:06.0: version 2.4
sata_sil 0000:06:06.0: Applying R_ERR on DMA activate FIS errata fix
scsi8 : sata_sil
scsi9 : sata_sil
scsi10 : sata_sil
scsi11 : sata_sil
ata9: SATA max UDMA/100 mmio m1024@0xfd8ff000 tf 0xfd8ff080 irq 20
ata10: SATA max UDMA/100 mmio m1024@0xfd8ff000 tf 0xfd8ff0c0 irq 20
ata11: SATA max UDMA/100 mmio m1024@0xfd8ff000 tf 0xfd8ff280 irq 20
ata12: SATA max UDMA/100 mmio m1024@0xfd8ff000 tf 0xfd8ff2c0 irq 20
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: irq 45 for MSI/MSI-X
r8169 0000:05:00.0: eth0: RTL8168c/8111c at 0xffffc9000004e000, 00:1f:d0:a4:26:ac, XID 1c4000c0 IRQ 45
r8169 0000:05:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.4.48 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.4.48 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci_hcd 0000:06:07.2: EHCI Host Controller
ehci_hcd 0000:06:07.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:06:07.2: irq 23, io mem 0xfd8fc000
ehci_hcd 0000:06:07.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.4.48 ehci_hcd
usb usb3: SerialNumber: 0000:06:07.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.4.48 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.4.48 ohci_hcd
usb usb5: SerialNumber: 0000:00:12.1
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.4.48 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.4.48 ohci_hcd
usb usb7: SerialNumber: 0000:00:13.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ATA-7: TS32GSSD25S-M, 090331, max UDMA/100
ata1.00: 62586880 sectors, multi 1: LBA
ata2.00: ATA-7: TS64GSSD25S-M, 090331, max UDMA/100
ata2.00: 125206528 sectors, multi 1: LBA
ata3.00: configured for UDMA/133
ata1.00: configured for UDMA/100
ata2.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TS32GSSD25S-M 0903 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 62586880 512-byte logical blocks: (32.0 GB/29.8 GiB)
scsi 1:0:0:0: Direct-Access ATA TS64GSSD25S-M 0903 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sdb] 125206528 512-byte logical blocks: (64.1 GB/59.7 GiB)
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sda: sda1 sda2
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI disk
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
ata9.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133
ata9.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata9.00: configured for UDMA/100
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI Host Controller
usb usb8: Manufacturer: Linux 3.4.48 ohci_hcd
usb usb8: SerialNumber: 0000:00:14.5
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci_hcd 0000:06:07.0: OHCI Host Controller
ohci_hcd 0000:06:07.0: new USB bus registered, assigned bus number 9
ohci_hcd 0000:06:07.0: irq 21, io mem 0xfd8fe000
ata4.00: ATA-8: WDC WD5000BPVT-00HXZT3, 01.01A01, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD5000BPVT-0 01.0 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sdd] 4096-byte physical blocks
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 3-5: new high-speed USB device number 2 using ehci_hcd
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI Host Controller
usb usb9: Manufacturer: Linux 3.4.48 ohci_hcd
usb usb9: SerialNumber: 0000:06:07.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 3 ports detected
ohci_hcd 0000:06:07.1: OHCI Host Controller
ohci_hcd 0000:06:07.1: new USB bus registered, assigned bus number 10
ohci_hcd 0000:06:07.1: irq 22, io mem 0xfd8fd000
usb 3-5: New USB device found, idVendor=1a40, idProduct=0101
usb 3-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-5: Product: USB 2.0 Hub
hub 3-5:1.0: USB hub found
hub 3-5:1.0: 4 ports detected
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: OHCI Host Controller
usb usb10: Manufacturer: Linux 3.4.48 ohci_hcd
usb usb10: SerialNumber: 0000:06:07.1
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11
xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 52 for MSI/MSI-X
usb usb11: New USB device found, idVendor=1d6b, idProduct=0002
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 3.4.48 xhci_hcd
usb usb11: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 12
usb usb12: New USB device found, idVendor=1d6b, idProduct=0003
usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb12: Product: xHCI Host Controller
usb usb12: Manufacturer: Linux 3.4.48 xhci_hcd
usb usb12: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 12-0:1.0: USB hub found
hub 12-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
rtc_cmos 00:05: setting system clock to 2013-06-15 01:52:55 UTC (1371261175)
powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor (6 cpu cores) (version 2.20.00)
powernow-k8: Core Performance Boosting: on.
powernow-k8: 0 : pstate 0 (3200 MHz)
powernow-k8: 1 : pstate 1 (2400 MHz)
powernow-k8: 2 : pstate 2 (1600 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
usb 3-5.2: new low-speed USB device number 3 using ehci_hcd
Refined TSC clocksource calibration: 3214.640 MHz.
Switching to clocksource tsc
usb 3-5.2: New USB device found, idVendor=051d, idProduct=0002
usb 3-5.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 3-5.2: Product: APC ES 750G FW:859.K1 .A USB FW:K1
usb 3-5.2: Manufacturer: American Power Conversion
usb 3-5.2: SerialNumber: 3B1107X11900
ata7: SATA link down (SStatus 0 SControl 0)
generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion APC ES 750G FW:859.K1 .A USB FW:K1 ] on usb-0000:06:07.2-5.2/input0
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata5.00: ATA-8: ST500LT012-9WS142, 0001SDM1, max UDMA/133
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
usb 3-5.3: new low-speed USB device number 4 using ehci_hcd
ata5.00: configured for UDMA/100
scsi 4:0:0:0: Direct-Access ATA ST500LT012-9WS14 0001 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sde] 4096-byte physical blocks
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 4:0:0:0: [sde] Attached SCSI disk
usb 3-5.3: New USB device found, idVendor=045e, idProduct=00cb
usb 3-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5.3: Product: Microsoft Basic Optical Mouse v2.0
usb 3-5.3: Manufacturer: Microsoft
input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:14.4/0000:06:07.2/usb3/3-5/3-5.3/3-5.3:1.0/input/input3
generic-usb 0003:045E:00CB.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:06:07.2-5.3/input0
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata6.00: ATA-8: Hitachi HTS545050B9A300, PB4OC64G, max UDMA/133
ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/100
scsi 5:0:0:0: Direct-Access ATA Hitachi HTS54505 PB4O PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdf: sdf1
sd 5:0:0:0: [sdf] Attached SCSI disk
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata8.00: ATA-8: Hitachi HDS721050CLA362, JP2OA50E, max UDMA/133
ata8.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata8.00: configured for UDMA/100
scsi 7:0:0:0: Direct-Access ATA Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
sd 7:0:0:0: Attached scsi generic sg6 type 0
sd 7:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 7:0:0:0: [sdg] Write Protect is off
sd 7:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 8:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
sd 8:0:0:0: Attached scsi generic sg7 type 0
sd 8:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 8:0:0:0: [sdh] Write Protect is off
sd 8:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdg: sdg1 sdg2 sdg3
sd 7:0:0:0: [sdg] Attached SCSI disk
sdh: sdh1
sd 8:0:0:0: [sdh] Attached SCSI disk
ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata10.00: ATA-8: WDC WD5000AACS-00ZUB0, 01.01B01, max UDMA/133
ata10.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata10.00: configured for UDMA/100
scsi 9:0:0:0: Direct-Access ATA WDC WD5000AACS-0 01.0 PQ: 0 ANSI: 5
sd 9:0:0:0: Attached scsi generic sg8 type 0
sd 9:0:0:0: [sdi] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 9:0:0:0: [sdi] Write Protect is off
sd 9:0:0:0: [sdi] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdi: sdi1 sdi2
sd 9:0:0:0: [sdi] Attached SCSI disk
ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata11.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
ata11.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata11.00: configured for UDMA/100
scsi 10:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
sd 10:0:0:0: Attached scsi generic sg9 type 0
sd 10:0:0:0: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 10:0:0:0: [sdj] Write Protect is off
sd 10:0:0:0: [sdj] Mode Sense: 00 3a 00 00
sd 10:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdj: sdj1
sd 10:0:0:0: [sdj] Attached SCSI disk
ata12: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata12.00: ATA-8: Hitachi HDS722020ALA330, JKAOA3EA, max UDMA/133
ata12.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata12.00: configured for UDMA/100
scsi 11:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
sd 11:0:0:0: [sdk] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 11:0:0:0: Attached scsi generic sg10 type 0
sd 11:0:0:0: [sdk] Write Protect is off
sd 11:0:0:0: [sdk] Mode Sense: 00 3a 00 00
sd 11:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdk: sdk1 sdk3
sd 11:0:0:0: [sdk] Attached SCSI disk
Freeing unused kernel memory: 544k freed
dracut: dracut-004-303.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
udev: starting version 147
udevd (112): /proc/112/oom_adj is deprecated, please use /proc/112/oom_score_adj instead.
dracut: Starting plymouth daemon
scsi12 : pata_atiixp
scsi13 : pata_atiixp
ata13: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata14: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
ata13.00: ATAPI: ASUS DRW-1814BL, 1.10, max UDMA/66
ata14.00: HPA detected: current 976764911, native 976773168
ata14.00: ATA-8: WDC WD5000BEVT-00ZAT0, 01.01A01, max UDMA/133
ata14.00: 976764911 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata14.01: HPA detected: current 976764911, native 976773168
ata14.01: ATA-8: Hitachi HTS545050B9A300, PB4OC60F, max UDMA/133
ata14.01: 976764911 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata13.00: configured for UDMA/66
ata14.00: configured for UDMA/100
scsi 12:0:0:0: CD-ROM ASUS DRW-1814BL 1.10 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 12:0:0:0: Attached scsi CD-ROM sr0
sr 12:0:0:0: Attached scsi generic sg11 type 5
ata14.01: configured for UDMA/100
scsi 13:0:0:0: Direct-Access ATA WDC WD5000BEVT-0 01.0 PQ: 0 ANSI: 5
sd 13:0:0:0: [sdl] 976764911 512-byte logical blocks: (500 GB/465 GiB)
sd 13:0:0:0: [sdl] Write Protect is off
sd 13:0:0:0: [sdl] Mode Sense: 00 3a 00 00
sd 13:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 13:0:0:0: Attached scsi generic sg12 type 0
scsi 13:0:1:0: Direct-Access ATA Hitachi HTS54505 PB4O PQ: 0 ANSI: 5
sd 13:0:1:0: Attached scsi generic sg13 type 0
sdl: sdl1
sd 13:0:1:0: [sdm] 976764911 512-byte logical blocks: (500 GB/465 GiB)
sd 13:0:1:0: [sdm] Write Protect is off
sd 13:0:1:0: [sdm] Mode Sense: 00 3a 00 00
sd 13:0:1:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 13:0:0:0: [sdl] Attached SCSI disk
sdm: sdm1
sd 13:0:1:0: [sdm] Attached SCSI disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
dracut: Remounting /dev/disk/by-label/root with -o noatime,nodiratime,ro
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/sda2
dracut: Loading SELinux policy
dracut: /sbin/load_policy: Can't load policy: No such device
dracut: Switching root
readahead-collector: starting
udev: starting version 147
WARNING! power/level is deprecated; use power/control instead
md: bind
md: bind
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 310.44 Wed Mar 27 14:51:30 PDT 2013
ALSA sound/pci/hda/hda_intel.c:2545 Using LPIB position fix
ALSA sound/pci/hda/hda_intel.c:1578 Enable sync_write for stable communication
ALSA sound/pci/hda/patch_realtek.c:1257 SKU: Nid=0x1d sku_cfg=0x4005e601
ALSA sound/pci/hda/patch_realtek.c:1259 SKU: port_connectivity=0x1
ALSA sound/pci/hda/patch_realtek.c:1260 SKU: enable_pcbeep=0x0
ALSA sound/pci/hda/patch_realtek.c:1261 SKU: check_sum=0x00000005
ALSA sound/pci/hda/patch_realtek.c:1262 SKU: customization=0x000000e6
ALSA sound/pci/hda/patch_realtek.c:1263 SKU: external_amp=0x0
ALSA sound/pci/hda/patch_realtek.c:1264 SKU: platform_type=0x0
ALSA sound/pci/hda/patch_realtek.c:1265 SKU: swap=0x0
ALSA sound/pci/hda/patch_realtek.c:1266 SKU: override=0x1
ALSA sound/pci/hda/hda_codec.c:5104 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
ALSA sound/pci/hda/hda_codec.c:5108 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:5112 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:5113 mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:5116 dig-out=0x1e/0x0
ALSA sound/pci/hda/hda_codec.c:5117 inputs:
ALSA sound/pci/hda/hda_codec.c:5121 Rear Mic=0x18
ALSA sound/pci/hda/hda_codec.c:5121 Front Mic=0x19
ALSA sound/pci/hda/hda_codec.c:5121 Line=0x1a
ALSA sound/pci/hda/hda_codec.c:5123
ALSA sound/pci/hda/hda_codec.c:5125 dig-in=0x1f
md: bind
ALSA sound/pci/hda/patch_realtek.c:1320 realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1336 realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0885
md: bind
bio: create slab at 1
md/raid0:md1: md_size is 2930248704 sectors.
md: RAID0 configuration for md1 - 1 zone
md: zone0=[sdd1/sdl1/sdm1]
zone-offset= 0KB, device-offset= 0KB, size=1465124352KB
md1: detected capacity change from 0 to 1500287336448
md1: unknown partition table
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
hda_intel: Disabling MSI
ALSA sound/pci/hda/hda_intel.c:1540 Enable delay in RIRB handling
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
wmi: Mapper loaded
input: PC Speaker as /devices/platform/pcspkr/input/input14
md: bind
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 500087578624
md0: unknown partition table
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
EXT4-fs (sda2): re-mounted. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdg3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdg2): mounted filesystem with ordered data mode. Opts: (null)
XFS (md1): Mounting Filesystem
XFS (md1): Ending clean mount
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdk1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdk3): mounted filesystem with ordered data mode. Opts: (null)
XFS (sdh1): Mounting Filesystem
XFS (sdh1): Ending clean mount
EXT4-fs (sdj1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdi2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdi1): mounted filesystem with ordered data mode. Opts: (null)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Adding 8401956k swap on /dev/sdg1. Priority:-1 extents:1 across:8401956k
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
r8169 0000:05:00.0: eth0: link down
r8169 0000:05:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:05:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
/dev/vmmon[2159]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[2159]: Module vmmon: initialized
[2166]: VMCI: shared components initialized.
[2166]: VMCI: host components initialized.
[2166]: VMCI: Module registered (name=vmci,major=10,minor=58).
[2166]: VMCI: Using host personality
[2166]: VMCI: Module (name=vmci) is initialized
ppdev: user-space parallel port driver
/dev/vmnet: open called by PID 2247 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
/dev/vmnet: open called by PID 2254 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 2260 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 2271 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
userif-3: sent link down event.
userif-3: sent link up event.
/dev/vmnet: open called by PID 2283 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 2289 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
eth0: no IPv6 routers present
vmnet1: no IPv6 routers present
vmnet8: no IPv6 routers present
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.10 (March 21, 2012)
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.10 (Jan 22, 2011)
8021q: 802.1Q VLAN Support v1.8
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
it87: Found IT8718F chip at 0x228, revision 5
it87: Beeping is supported
usb 3-5.3: USB disconnect, device number 4
usb 3-5.3: new low-speed USB device number 5 using ehci_hcd
usb 3-5.3: New USB device found, idVendor=045e, idProduct=00cb
usb 3-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5.3: Product: Microsoft Basic Optical Mouse v2.0
usb 3-5.3: Manufacturer: Microsoft
input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:14.4/0000:06:07.2/usb3/3-5/3-5.3/3-5.3:1.0/input/input15
generic-usb 0003:045E:00CB.0003: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:06:07.2-5.3/input0
NVRM: GPU at 0000:01:00: GPU-3109c52d-16eb-070b-d7bc-80293461b4ad
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
type=1305 audit(1371261238.643:69942): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
type=1305 audit(1371261238.643:69943): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
readahead-collector: sorting
readahead-collector: finished
/dev/vmmon[4777]: PTSC: initialized at 3214640000 Hz using TSC, TSCs are synchronized.
/dev/vmmon[4777]: Monitor IPI vector: 0
/dev/vmnet: open called by PID 5313 (vmx-vcpu-0)
device eth0 entered promiscuous mode
bridge-eth0: enabled promiscuous mode
/dev/vmnet: port on hub 0 successfully opened
yasm[8556]: segfault at 3500a69830 ip 0000003393284f19 sp 00007fff5f1e7488 error 4 in libc-2.12.so[3393200000+18a000]
device eth0 left promiscuous mode
bridge-eth0: disabled promiscuous mode
BUG: unable to handle kernel paging request at 0000000000251566
IP: [] __kmalloc+0x4/0x180
PGD 1cb5c9067 PUD 280d8d067 PMD 0
Oops: 0002 [#1] SMP
CPU 5
Modules linked in: it87 hwmon_vid sunrpc 8021q garp stp llc bnx2fc cnic fcoe libfcoe libfc scsi_transport_fc scsi_tgt ppdev vmnet(O) parport_pc parport vmblock(O) vsock(O) vmci(O) vmmon(O) nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc nls_utf8 vhost_net macvtap macvlan tun uinput pcspkr wmi i2c_piix4 snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc nvidia(PO) i2c_core ata_generic pata_acpi pata_atiixp [last unloaded: scsi_wait_scan]
Pid: 11836, comm: sh Tainted: P O 3.4.48 #1 Gigabyte Technology Co., Ltd. GA-MA790GP-DS4H/GA-MA790GP-DS4H
RIP: 0010:[] [] __kmalloc+0x4/0x180
RSP: 0018:ffff8802b784fd70 EFLAGS: 00010282
RAX: ffff88013f26eac0 RBX: 0000000000000800 RCX: 0000000000051467
RDX: 0000000000051466 RSI: 00000000000002d0 RDI: 0000000000000800
RBP: ffff88013f26eac0 R08: ffffffff8110f847 R09: 0000000000000000
R10: 00000000fffffff9 R11: 0000000000000000 R12: 0000000000000100
R13: ffff88041b5a4e40 R14: ffff88041c12b9d0 R15: ffff88041b5a4dc0
FS: 00007faf74d0c700(0000) GS:ffff88042fd40000(0000) knlGS:00000000f62c3b70
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000251566 CR3: 0000000101e1a000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process sh (pid: 11836, threadinfo ffff8802b784e000, task ffff88041b98ae80)
Stack:
ffff8802b784fdc8 000000941e0b4dac ffff8802b8549788 0000000000000100
0000000000000010 ffffffff8110f7d7 0000000000000100 ffffffff8110f85d
ffff8802b784fe7c ffff88041c12b9c0 ffff8802b784fe7c ffffffff8110fb4d
Call Trace:
[] ? alloc_fdmem+0x17/0x30
[] ? alloc_fdtable+0x6d/0xe0
[] ? dup_fd+0x27d/0x300
[] ? copy_process+0x70b/0x11e0
[] ? kmem_cache_alloc+0xa5/0xc0
[] ? do_fork+0xa2/0x270
[] ? __set_task_blocked+0x30/0x80
[] ? stub_clone+0x13/0x20
[] ? system_call_fastpath+0x16/0x1b
Code: 12 00 00 00 41 bc 11 00 00 00 bd 10 00 00 00 e9 09 ff ff ff 0f 0b eb fe 0f 0b eb fe 66 66 2e 0f 1f 84 00 00 00 00 00 48 83 ec 28 81 ff 00 20 00 00 4c 89 6c 24 20 48 89 5c 24 08 41 89 f5 48
RIP [] __kmalloc+0x4/0x180
RSP
CR2: 0000000000251566
---[ end trace 8875a2aba5a59ee4 ]---
Bridge firewalling registered
sysctl: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case. If you have one, please send an email to linux-mm@kvack.org.