dmesg - jun11
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-23-generic (buildd@aatxe) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #34-Ubuntu SMP Wed May 29 20:24:54 UTC 2013 (Ubuntu 3.8.0-23.34-generic 3.8.11)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bdd0cfff] usable
BIOS-e820: [mem 0x00000000bdd0d000-0x00000000be16efff] reserved
BIOS-e820: [mem 0x00000000be16f000-0x00000000be4bbfff] ACPI NVS
BIOS-e820: [mem 0x00000000be4bc000-0x00000000bec34fff] reserved
BIOS-e820: [mem 0x00000000bec35000-0x00000000bec35fff] usable
BIOS-e820: [mem 0x00000000bec36000-0x00000000bee3bfff] ACPI NVS
BIOS-e820: [mem 0x00000000bee3c000-0x00000000bf257fff] usable
BIOS-e820: [mem 0x00000000bf258000-0x00000000bf7f2fff] reserved
BIOS-e820: [mem 0x00000000bf7f3000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A85X Extreme6, BIOS P1.40 10/17/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x23f000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BF800000 mask FFFFFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
total RAM covered: 3064M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000fd8a0-0x000fd8af] mapped at [c00fd8a0]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009a000] 9a000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x345b4000-0x362d1fff]
ACPI: RSDP 000f0490 00024 (v02 ALASKA)
ACPI: XSDT be4ab078 00074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP be4b1828 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598)
ACPI: DSDT be4ab188 0669F (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS be4b4d80 00040
ACPI: APIC be4b1920 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT be4b1998 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG be4b19e0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: AAFT be4b1a20 000CE (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET be4b1af0 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT be4b1b28 00D40 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: SSDT be4b2868 004B7 (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: CRAT be4b2d20 002F8 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: BGRT be4b3018 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
8308MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x3effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009dfff]
node 0: [mem 0x00100000-0xbdd0cfff]
node 0: [mem 0xbec35000-0xbec35fff]
node 0: [mem 0xbee3c000-0xbf257fff]
node 0: [mem 0xbf7f3000-0xbf7fffff]
node 0: [mem 0x00001000-0x3effffff]
On node 0 totalpages: 2085060
free_area_init_node: node 0, pgdat c18f6100, node_mem_map efdd4200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3950 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 16617 pages used for memmap
HighMem zone: 1840207 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
e820: [mem 0xbf800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bb2000 s35008 r0 d22336 u57344
pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066659
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
xsave: enabled xstate_bv 0x7, cntxt size 0x340
allocated 18841472 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0023f000)
Memory: 8206332k/9420800k available (6251k kernel code, 133908k reserved, 2973k data, 788k init, 7427296k highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1903000 - 0xc19c8000 ( 788 kB)
.data : 0xc161afb0 - 0xc1902440 (2973 kB)
.text : 0xc1000000 - 0xc161afb0 (6251 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f6408000 soft=f640a000
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 4192.246 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8384.49 BogoMIPS (lpj=16768984)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26119 entries in 52 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-5800K APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
Performance Events:
perf: AMD core performance counters detected
AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f64d4000 soft=f64d6000
Initializing CPU#1
smpboot: Booting Node 0, Processors #1
CPU 2 irqstacks, hard=f64fe000 soft=f6500000
Initializing CPU#2
#2
CPU 3 irqstacks, hard=f654c000 soft=f654e000
#3 OK
Initializing CPU#3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (33537.96 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbe16f000-0xbe4bbfff] (3461120 bytes)
PM: Registering ACPI NVS region [mem 0xbec36000-0xbee3bfff] (2121728 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.0: reg 10: [mem 0xff706000-0xff707fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.1: reg 10: [mem 0xff704000-0xff705fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0xf090-0xf097]
pci 0000:00:11.0: reg 14: [io 0xf080-0xf083]
pci 0000:00:11.0: reg 18: [io 0xf070-0xf077]
pci 0000:00:11.0: reg 1c: [io 0xf060-0xf063]
pci 0000:00:11.0: reg 20: [io 0xf050-0xf05f]
pci 0000:00:11.0: reg 24: [mem 0xff70d000-0xff70d7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xff70c000-0xff70cfff]
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xff70b000-0xff70b0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xff70a000-0xff70afff]
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xff709000-0xff7090ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
pci 0000:00:14.1: reg 10: [io 0xf040-0xf047]
pci 0000:00:14.1: reg 14: [io 0xf030-0xf033]
pci 0000:00:14.1: reg 18: [io 0xf020-0xf027]
pci 0000:00:14.1: reg 1c: [io 0xf010-0xf013]
pci 0000:00:14.1: reg 20: [io 0xf000-0xf00f]
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xff700000-0xff703fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xff708000-0xff708fff]
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.3: [1022:43a3] type 01 class 0x060400
pci 0000:00:15.3: supports D1 D2
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:01:00.0: [1002:683d] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xff600000-0xff63ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xff640000-0xff65ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xff660000-0xff663fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xff600000-0xff6fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:04:00.0: reg 10: [mem 0xff500000-0xff507fff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:00:15.2: PCI bridge to [bus 04]
pci 0000:00:15.2: bridge window [mem 0xff500000-0xff5fffff]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.3: PCI bridge to [bus 05]
pci 0000:00:15.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE23._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x19) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbdd0d000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbec36000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf258000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xff800000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xff600000-0xff6fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.2: PCI bridge to [bus 04]
pci 0000:00:15.2: bridge window [mem 0xff500000-0xff5fffff]
pci 0000:00:15.3: PCI bridge to [bus 05]
pci 0000:00:15.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xff600000-0xff6fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:04: resource 1 [mem 0xff500000-0xff5fffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 29816k freed
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1370931781.824:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 1579
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xff70b000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-23-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xff709000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-23-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 18, io mem 0xff70c000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-23-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.0: irq 18, io mem 0xff70a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-23-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:14.5: irq 18, io mem 0xff708000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-23-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:14.5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:00:10.0: irq 40 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.0-23-generic xhci_hcd
usb usb6: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.8.0-23-generic xhci_hcd
usb usb7: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
isapnp: No Plug & Play device found
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
xhci_hcd 0000:00:10.1: irq 45 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 46 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.8.0-23-generic xhci_hcd
usb usb8: SerialNumber: 0000:00:10.1
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.8.0-23-generic xhci_hcd
usb usb9: SerialNumber: 0000:00:10.1
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 52 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 53 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 54 for MSI/MSI-X
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.8.0-23-generic xhci_hcd
usb usb10: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 3.8.0-23-generic xhci_hcd
usb usb11: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: d2833f1699a39f5a097a0653bde4b9d83163415d'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:04: setting system clock to 2013-06-11 06:23:02 UTC (1370931782)
powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 788k freed
Write protecting the kernel text: 6252k
Write protecting the kernel read-only data: 2436k
NX-protecting the kernel data: 3988k
udevd[110]: starting version 175
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
Disabling lock debugging due to kernel taint
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: irq 55 for MSI/MSI-X
r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xf840e000, bc:5f:f4:78:e9:2b, XID 0c900800 IRQ 55
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 56 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0xb impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part sxs
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m2048@0xff70d000 port 0xff70d100 irq 56
ata4: SATA max UDMA/133 abar m2048@0xff70d000 port 0xff70d180 irq 56
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xff70d000 port 0xff70d280 irq 56
usb 4-3: new low-speed USB device number 2 using ohci_hcd
usb 4-3: New USB device found, idVendor=046d, idProduct=c517
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: USB Receiver
usb 4-3: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb4/4-3/4-3:1.0/input/input3
logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:13.0-3/input0
logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb4/4-3/4-3:1.1/input/input4
logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-3/input1
usb 10-1: new high-speed USB device number 2 using xhci_hcd
usb 10-1: New USB device found, idVendor=090c, idProduct=1000
usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 10-1: Product: DISK 2.0
usb 10-1: Manufacturer: USB
usb 10-1: SerialNumber: XXTNEERS0RQ922CR
usb 10-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 10-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
Initializing USB Mass Storage driver...
scsi6 : usb-storage 10-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
tsc: Refined TSC clocksource calibration: 4192.376 MHz
Switching to clocksource tsc
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-8: ST750LX003-1AC154, SM12, max UDMA/133
ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: ATAPI: ATAPI iHAS324 Y, BL1W, max UDMA/100
ata4.00: configured for UDMA/133
ata3.00: configured for UDMA/100
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
scsi 2:0:0:0: CD-ROM ATAPI iHAS324 Y BL1W PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg0 type 5
scsi 3:0:0:0: Direct-Access ATA ST750LX003-1AC15 SM12 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 3:0:0:0: [sda] 4096-byte physical blocks
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 3:0:0:0: [sda] Attached SCSI disk
ata6.00: HPA detected: current 1953523055, native 1953525168
ata6.00: ATA-8: ST31000528AS, CC34, max UDMA/133
ata6.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 < sdb5 > sdb3
sd 5:0:0:0: [sdb] Attached SCSI disk
scsi 6:0:0:0: Direct-Access USB DISK 2.0 0403 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
vesafb: mode is 1152x864x32, linelength=4608, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xf8500000, using 3904k, total 3904k
Console: switching to colour frame buffer device 144x54
fb0: VESA VGA frame buffer device
xor: automatically using best checksumming function:
avx : 5293.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
Btrfs loaded
EXT4-fs (sdb5): INFO: recovery required on readonly filesystem
EXT4-fs (sdb5): write access will be enabled during recovery
EXT4-fs (sdb5): recovery complete
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
Adding 8343548k swap on /dev/sda4. Priority:-1 extents:1 across:8343548k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[502]: starting version 175
microcode: CPU0: patch_level=0x06001119
lp: driver loaded but no devices found
device-mapper: multipath: version 1.5.1 loaded
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
microcode: CPU1: patch_level=0x06001119
microcode: CPU2: patch_level=0x06001119
microcode: CPU3: patch_level=0x06001119
microcode: Microcode Update Driver: v2.00 , Peter Oruba
[fglrx] Maximum main memory to use for locked dma buffers: 7809 MBytes.
[fglrx] vendor: 1002 device: 683d count: 1
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 13.10.10 [May 23 2013] with 1 minors
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: irq 57 for MSI/MSI-X
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
init: failsafe main process (1061) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: avahi-cups-reload main process (1139) terminated with status 1
ppdev: user-space parallel port driver
init: smbd main process (1066) killed by HUP signal
init: smbd main process ended, respawning
r8169 0000:05:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x416 offMax=0x2e4e
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.12 (interface 0x001a0004).
r8169 0000:05:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
vboxpci: IOMMU not found (not registered)
fglrx_pci 0000:01:00.0: irq 58 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1715
[fglrx] Firegl kernel thread PID: 1716
[fglrx] Firegl kernel thread PID: 1717
[fglrx] IRQ 58 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f87c000, size:484000
[fglrx] Reserved FB block: Unshared offset:3ffee000, size:12000
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
ata6: failed to read log page 10h (errno=-5)
ata6.00: exception Emask 0x1 SAct 0x3 SErr 0x0 action 0x0
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:00:a8:0d:ce/00:00:44:00:00/40 tag 0 ncq 4096 in
res 40/00:00:a8:0d:ce/00:00:44:00:00/40 Emask 0x1 (device error)
ata6.00: status: { DRDY }
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:08:f0:67:ca/00:00:44:00:00/40 tag 1 ncq 4096 in
res 40/00:00:a8:0d:ce/00:00:44:00:00/40 Emask 0x1 (device error)
ata6.00: status: { DRDY }
ata6.00: both IDENTIFYs aborted, assuming NODEV
ata6.00: revalidation failed (errno=-2)
ata6: hard resetting link
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: configured for UDMA/133
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:08:a8:0d:ce/00:00:44:00:00/40 tag 1 ncq 4096 in
res 41/40:08:ad:0d:ce/00:00:44:00:00/00 Emask 0x409 (media error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { UNC }
ata6.00: configured for UDMA/133
sd 5:0:0:0: [sdb] Unhandled sense code
sd 5:0:0:0: [sdb]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 5:0:0:0: [sdb]
Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
44 ce 0d ad
sd 5:0:0:0: [sdb]
Add. Sense: Unrecovered read error - auto reallocate failed
sd 5:0:0:0: [sdb] CDB:
Read(10): 28 00 44 ce 0d a8 00 00 08 00
end_request: I/O error, dev sdb, sector 1154354605
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x4 SErr 0x0 action 0x0
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:10:a8:0d:ce/00:00:44:00:00/40 tag 2 ncq 4096 in
res 41/40:08:ad:0d:ce/00:00:44:00:00/00 Emask 0x409 (media error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { UNC }
ata6.00: configured for UDMA/133
sd 5:0:0:0: [sdb] Unhandled sense code
sd 5:0:0:0: [sdb]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 5:0:0:0: [sdb]
Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
44 ce 0d ad
sd 5:0:0:0: [sdb]
Add. Sense: Unrecovered read error - auto reallocate failed
sd 5:0:0:0: [sdb] CDB:
Read(10): 28 00 44 ce 0d a8 00 00 08 00
end_request: I/O error, dev sdb, sector 1154354605
ata6: EH complete
ata6: failed to read log page 10h (errno=-5)
ata6.00: exception Emask 0x1 SAct 0x7 SErr 0x0 action 0x0
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:00:a8:0d:ce/00:00:44:00:00/40 tag 0 ncq 4096 in
res 40/00:00:a8:0d:ce/00:00:44:00:00/40 Emask 0x1 (device error)
ata6.00: status: { DRDY }
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/40:08:c0:4d:21/00:00:00:00:00/40 tag 1 ncq 32768 in
res 40/00:00:a8:0d:ce/00:00:44:00:00/40 Emask 0x1 (device error)
ata6.00: status: { DRDY }
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/20:10:00:81:08/00:00:27:00:00/40 tag 2 ncq 16384 in
res 40/00:00:a8:0d:ce/00:00:44:00:00/40 Emask 0x1 (device error)
ata6.00: status: { DRDY }
ata6.00: both IDENTIFYs aborted, assuming NODEV
ata6.00: revalidation failed (errno=-2)
ata6: hard resetting link
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: configured for UDMA/133
ata6: EH complete
ata6: failed to read log page 10h (errno=-5)
ata6.00: exception Emask 0x1 SAct 0x3f SErr 0x0 action 0x0
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/40:00:80:57:21/00:00:00:00:00/40 tag 0 ncq 32768 in
res 40/00:08:48:95:08/00:00:27:00:00/40 Emask 0x1 (device error)
ata6.00: status: { DRDY }
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/20:08:48:95:08/00:00:27:00:00/40 tag 1 ncq 16384 in
res 40/00:08:48:95:08/00:00:27:00:00/40 Emask 0x1 (device error)
ata6.00: status: { DRDY }
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:10:a8:0d:ce/00:00:44:00:00/40 tag 2 ncq 4096 in
res 40/00:08:48:95:08/00:00:27:00:00/40 Emask 0x1 (device error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/30:18:20:76:8b/00:00:2c:00:00/40 tag 3 ncq 24576 out
res 40/00:08:48:95:08/00:00:27:00:00/40 Emask 0x1 (device error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/08:20:50:76:8b/00:00:2c:00:00/40 tag 4 ncq 4096 out
res 40/00:08:48:95:08/00:00:27:00:00/40 Emask 0x1 (device error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/a0:28:b8:a4:86/00:00:2a:00:00/40 tag 5 ncq 81920 out
res 40/00:08:48:95:08/00:00:27:00:00/40 Emask 0x1 (device error)
ata6.00: status: { DRDY }
ata6.00: both IDENTIFYs aborted, assuming NODEV
ata6.00: revalidation failed (errno=-2)
ata6: hard resetting link
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: configured for UDMA/133
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x38 SErr 0x0 action 0x0
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:18:a8:0d:ce/00:00:44:00:00/40 tag 3 ncq 4096 in
res 41/40:08:ad:0d:ce/00:00:44:00:00/00 Emask 0x409 (media error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { UNC }
ata6.00: configured for UDMA/133
sd 5:0:0:0: [sdb] Unhandled sense code
sd 5:0:0:0: [sdb]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 5:0:0:0: [sdb]
Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
44 ce 0d ad
sd 5:0:0:0: [sdb]
Add. Sense: Unrecovered read error - auto reallocate failed
sd 5:0:0:0: [sdb] CDB:
Read(10): 28 00 44 ce 0d a8 00 00 08 00
end_request: I/O error, dev sdb, sector 1154354605
ata6: EH complete
ata6: failed to read log page 10h (errno=-5)
ata6.00: NCQ disabled due to excessive errors
ata6.00: exception Emask 0x1 SAct 0x3 SErr 0x0 action 0x0
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:00:a8:0d:ce/00:00:44:00:00/40 tag 0 ncq 4096 in
res 40/00:00:a8:0d:ce/00:00:44:00:00/40 Emask 0x1 (device error)
ata6.00: status: { DRDY }
ata6.00: failed command: WRITE FPDMA QUEUED
ata6.00: cmd 61/08:08:38:17:c4/00:00:44:00:00/40 tag 1 ncq 4096 out
res 40/00:00:a8:0d:ce/00:00:44:00:00/40 Emask 0x1 (device error)
ata6.00: status: { DRDY }
ata6.00: both IDENTIFYs aborted, assuming NODEV
ata6.00: revalidation failed (errno=-2)
ata6: hard resetting link
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: configured for UDMA/133
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata6.00: irq_stat 0x40000001
ata6.00: failed command: READ DMA EXT
ata6.00: cmd 25/00:08:a8:0d:ce/00:00:44:00:00/e0 tag 0 dma 4096 in
res 51/40:00:ad:0d:ce/00:00:44:00:00/00 Emask 0x9 (media error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { UNC }
ata6.00: configured for UDMA/133
sd 5:0:0:0: [sdb] Unhandled sense code
sd 5:0:0:0: [sdb]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 5:0:0:0: [sdb]
Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
44 ce 0d ad
sd 5:0:0:0: [sdb]
Add. Sense: Unrecovered read error - auto reallocate failed
sd 5:0:0:0: [sdb] CDB:
Read(10): 28 00 44 ce 0d a8 00 00 08 00
end_request: I/O error, dev sdb, sector 1154354605
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata6.00: irq_stat 0x40000001
ata6.00: failed command: READ DMA EXT
ata6.00: cmd 25/00:08:a8:0d:ce/00:00:44:00:00/e0 tag 0 dma 4096 in
res 51/40:00:ad:0d:ce/00:00:44:00:00/00 Emask 0x9 (media error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { UNC }
ata6.00: configured for UDMA/133
sd 5:0:0:0: [sdb] Unhandled sense code
sd 5:0:0:0: [sdb]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 5:0:0:0: [sdb]
Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
44 ce 0d ad
sd 5:0:0:0: [sdb]
Add. Sense: Unrecovered read error - auto reallocate failed
sd 5:0:0:0: [sdb] CDB:
Read(10): 28 00 44 ce 0d a8 00 00 08 00
end_request: I/O error, dev sdb, sector 1154354605
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata6.00: irq_stat 0x40000001
ata6.00: failed command: READ DMA EXT
ata6.00: cmd 25/00:08:a8:0d:ce/00:00:44:00:00/e0 tag 0 dma 4096 in
res 51/40:00:ad:0d:ce/00:00:44:00:00/00 Emask 0x9 (media error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { UNC }
ata6.00: configured for UDMA/133
sd 5:0:0:0: [sdb] Unhandled sense code
sd 5:0:0:0: [sdb]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 5:0:0:0: [sdb]
Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
44 ce 0d ad
sd 5:0:0:0: [sdb]
Add. Sense: Unrecovered read error - auto reallocate failed
sd 5:0:0:0: [sdb] CDB:
Read(10): 28 00 44 ce 0d a8 00 00 08 00
end_request: I/O error, dev sdb, sector 1154354605
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata6.00: irq_stat 0x40000001
ata6.00: failed command: READ DMA EXT
ata6.00: cmd 25/00:08:a8:0d:ce/00:00:44:00:00/e0 tag 0 dma 4096 in
res 51/40:00:ad:0d:ce/00:00:44:00:00/00 Emask 0x9 (media error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { UNC }
ata6.00: configured for UDMA/133
sd 5:0:0:0: [sdb] Unhandled sense code
sd 5:0:0:0: [sdb]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 5:0:0:0: [sdb]
Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
44 ce 0d ad
sd 5:0:0:0: [sdb]
Add. Sense: Unrecovered read error - auto reallocate failed
sd 5:0:0:0: [sdb] CDB:
Read(10): 28 00 44 ce 0d a8 00 00 08 00
end_request: I/O error, dev sdb, sector 1154354605
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata6.00: failed command: WRITE DMA EXT
ata6.00: cmd 35/00:08:68:0b:14/00:00:45:00:00/e0 tag 0 dma 4096 out
res 40/00:00:ad:0d:ce/00:00:44:00:00/00 Emask 0x4 (timeout)
ata6.00: status: { DRDY }
ata6: hard resetting link
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: configured for UDMA/133
ata6: EH complete
usb 4-3: USB disconnect, device number 2