dmesg - disk_test
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-21-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 (Ubuntu 3.8.0-21.32-generic 3.8.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ba9bbfff] usable
BIOS-e820: [mem 0x00000000ba9bc000-0x00000000bac97fff] reserved
BIOS-e820: [mem 0x00000000bac98000-0x00000000baca7fff] ACPI data
BIOS-e820: [mem 0x00000000baca8000-0x00000000bba09fff] ACPI NVS
BIOS-e820: [mem 0x00000000bba0a000-0x00000000bca4dfff] reserved
BIOS-e820: [mem 0x00000000bca4e000-0x00000000bca4efff] usable
BIOS-e820: [mem 0x00000000bca4f000-0x00000000bcc54fff] ACPI NVS
BIOS-e820: [mem 0x00000000bcc55000-0x00000000bd082fff] usable
BIOS-e820: [mem 0x00000000bd083000-0x00000000bd7f3fff] reserved
BIOS-e820: [mem 0x00000000bd7f4000-0x00000000bd7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000083effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97 R2.0, BIOS 1302 11/14/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x83f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BD800000 mask FFFFFF800000 uncachable
3 base 0000BE000000 mask FFFFFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000083f000000 aka 33776M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3032MB, range: 8MB, type UC
reg 3, base: 3040MB, range: 32MB, type UC
total RAM covered: 3032M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3032MB, range: 8MB, type UC
reg 3, base: 3040MB, range: 32MB, type UC
e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xbd7fffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0xbd7fffff] page 2M
kernel direct mapping tables up to 0xbd7fffff @ [mem 0x1fffe000-0x1fffffff]
init_memory_mapping: [mem 0x100001000-0x83effffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x7ffffffff] page 1G
[mem 0x800000000-0x83effffff] page 2M
kernel direct mapping tables up to 0x83effffff @ [mem 0xbd7fc000-0xbd7fffff]
RAMDISK: [mem 0x36120000-0x37087fff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000bac9f070 0005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000baca6ce0 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598)
ACPI: DSDT 00000000bac9f168 07B77 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bba04f80 00040
ACPI: APIC 00000000baca6df0 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000baca6e90 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000baca6ed8 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000baca6f18 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: BGRT 00000000baca72b0 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000baca6fa8 00304 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000083effffff]
Initmem setup node 0 [mem 0x00000000-0x83effffff]
NODE_DATA [mem 0x83effb000-0x83effffff]
[ffffea0000000000-ffffea0020ffffff] PMD -> [ffff88081e600000-ffff88083e5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x83effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009dfff]
node 0: [mem 0x00100000-0xba9bbfff]
node 0: [mem 0xbca4e000-0xbca4efff]
node 0: [mem 0xbcc55000-0xbd082fff]
node 0: [mem 0xbd7f4000-0xbd7fffff]
node 0: [mem 0x100001000-0x83effffff]
On node 0 totalpages: 8363396
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 11896 pages used for memmap
DMA32 zone: 749439 pages, LIFO batch:31
Normal zone: 118720 pages used for memmap
Normal zone: 7479359 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000ba9bc000 - 00000000bac98000
PM: Registered nosave memory: 00000000bac98000 - 00000000baca8000
PM: Registered nosave memory: 00000000baca8000 - 00000000bba0a000
PM: Registered nosave memory: 00000000bba0a000 - 00000000bca4e000
PM: Registered nosave memory: 00000000bca4f000 - 00000000bcc55000
PM: Registered nosave memory: 00000000bd083000 - 00000000bd7f4000
PM: Registered nosave memory: 00000000bd800000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
e820: [mem 0xbd800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88083ec00000 s85056 r8192 d21440 u262144
pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8232710
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 6268000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ b0000000
PM: Registered nosave memory: 00000000b0000000 - 00000000b4000000
Memory: 32765188k/34586624k available (7006k kernel code, 1133040k absent, 688396k reserved, 6238k data, 992k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
NR_IRQS:16640 nr_irqs:1288 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4013.146 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8026.29 BogoMIPS (lpj=16052584)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00bd800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26690 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events:
perf: AMD core performance counters detected
AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (64210.33 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbaca8000-0xbba09fff] (14032896 bytes)
PM: Registering ACPI NVS region [mem 0xbca4f000-0xbcc54fff] (2121728 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 24: [mem 0xfe30b000-0xfe30b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfe30a000-0xfe30afff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfe309000-0xfe3090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfe308000-0xfe308fff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfe307000-0xfe3070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfe300000-0xfe303fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfe306000-0xfe306fff]
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 10: [mem 0xfe305000-0xfe305fff]
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 10: [mem 0xfe304000-0xfe3040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfe080000-0xfe083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 18: [mem 0xd2104000-0xd2104fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xd2100000-0xd2103fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:03:00.0: reg 10: [mem 0xfe200000-0xfe207fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:04:00.0: reg 10: [mem 0xfe100000-0xfe107fff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:05:05.0: [1106:2106] type 00 class 0x020000
pci 0000:05:05.0: reg 10: [io 0x0000-0x00ff]
pci 0000:05:05.0: reg 14: [mem 0x00000000-0x000000ff]
pci 0000:05:05.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:05:05.0: supports D1 D2
pci 0000:05:05.0: PME# supported from D0 D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC07._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xba9bc000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbca4f000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd083000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x83f000000-0x83fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: disabling [io 0x0000-0x000f] because it overlaps 0000:05:05.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:01: disabling [io 0x0060-0x005f disabled] because it overlaps 0000:05:05.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:01: disabling [io 0x0064-0x0063 disabled] because it overlaps 0000:05:05.0 BAR 0 [io 0x0000-0x00ff]
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xff800000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x02af] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: disabling [io 0x0010-0x001f] because it overlaps 0000:05:05.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0022-0x003f] because it overlaps 0000:05:05.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0044-0x005f] because it overlaps 0000:05:05.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0062-0x0063] because it overlaps 0000:05:05.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0065-0x006f] because it overlaps 0000:05:05.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0072-0x007f] because it overlaps 0000:05:05.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0080] because it overlaps 0000:05:05.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0084-0x0086] because it overlaps 0000:05:05.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0088] because it overlaps 0000:05:05.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x008c-0x008e] because it overlaps 0000:05:05.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0090-0x009f] because it overlaps 0000:05:05.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x00a2-0x00bf] because it overlaps 0000:05:05.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x00e0-0x00ef] because it overlaps 0000:05:05.0 BAR 0 [io 0x0000-0x00ff]
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:14.4: BAR 14: assigned [mem 0xd2000000-0xd20fffff]
pci 0000:00:14.4: BAR 15: assigned [mem 0xd2200000-0xd22fffff pref]
pci 0000:00:14.4: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:05:05.0: BAR 6: assigned [mem 0xd2200000-0xd220ffff pref]
pci 0000:05:05.0: BAR 0: assigned [io 0x1000-0x10ff]
pci 0000:05:05.0: BAR 1: assigned [mem 0xd2000000-0xd20000ff]
pci 0000:05:05.0: BAR 1: error updating (0xd2000000 != 0xc2000000)
pci 0000:00:14.4: PCI bridge to [bus 05]
pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:14.4: bridge window [mem 0xd2000000-0xd20fffff]
pci 0000:00:14.4: bridge window [mem 0xd2200000-0xd22fffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:04: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:05: resource 1 [mem 0xd2000000-0xd20fffff]
pci_bus 0000:05: resource 2 [mem 0xd2200000-0xd22fffff pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x03af]
pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:05: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:05: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: resource 10 [mem 0xc0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15776k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b0000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1370327544.736:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 32768
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe309000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-21-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 21, io mem 0xfe307000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-21-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 23, io mem 0xfe304000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-21-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe30a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-21-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 20, io mem 0xfe308000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-21-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe306000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.0-21-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 22, io mem 0xfe305000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.8.0-21-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:03:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 79 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.8.0-21-generic xhci_hcd
usb usb8: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.8.0-21-generic xhci_hcd
usb usb9: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:04:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 83 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 84 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 85 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 86 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 87 for MSI/MSI-X
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.8.0-21-generic xhci_hcd
usb usb10: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 3.8.0-21-generic xhci_hcd
usb usb11: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: da639d7d39047796a6cdf66158dce65752f170ea'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:04: setting system clock to 2013-06-04 06:32:26 UTC (1370327546)
powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 992k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1176k freed
Freeing unused kernel memory: 1080k freed
udevd[131]: starting version 175
Disabling lock debugging due to kernel taint
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 6 Gbps 0x20 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 88 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168f/8111f at 0xffffc9000304a000, 60:a4:4c:57:d9:8d, XID 08000800 IRQ 88
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b380 irq 19
usb 4-4: new low-speed USB device number 2 using ohci_hcd
usb 4-4: New USB device found, idVendor=03f0, idProduct=0024
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-4: Product: HP Basic USB Keyboard
usb 4-4: Manufacturer: CHICONY
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input2
hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:12.0-4/input0
tsc: Refined TSC clocksource calibration: 4013.515 MHz
Switching to clocksource tsc
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ATA-8: WDC WD5000AAKX-08ERMA0, 19.01H19, max UDMA/100
ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/100
scsi 5:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 19.0 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 5:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 33452028k swap on /dev/sda5. Priority:-1 extents:1 across:33452028k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[458]: starting version 175
microcode: CPU0: patch_level=0x0600081c
MCE: In-kernel MCE decoding enabled.
lp: driver loaded but no devices found
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc9000304cb00). heartbeat=60 sec (nowayout=0)
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0[ 11.510210] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input3
type=1400 audit(1370327556.496:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=620 comm="apparmor_parser"
type=1400 audit(1370327556.496:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=615 comm="apparmor_parser"
type=1400 audit(1370327556.496:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=620 comm="apparmor_parser"
type=1400 audit(1370327556.496:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=615 comm="apparmor_parser"
type=1400 audit(1370327556.496:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=620 comm="apparmor_parser"
type=1400 audit(1370327556.496:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=615 comm="apparmor_parser"
asus_wmi: Disabling ACPI video driver
MXM: GUID detected in BIOS
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8280b1
nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
nouveau [ DEVICE][0000:01:00.0] Family : NV50
nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 70.18.5f.00.06
nouveau [ PFB][0000:01:00.0] RAM type: DDR3
nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
microcode: CPU1: patch_level=0x0600081c
microcode: CPU2: patch_level=0x0600081c
microcode: CPU3: patch_level=0x0600081c
microcode: CPU4: patch_level=0x0600081c
microcode: CPU5: patch_level=0x0600081c
microcode: CPU6: patch_level=0x0600081c
microcode: CPU7: patch_level=0x0600081c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input12
[TTM] Zone kernel: Available graphics memory: 16425094 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 1024 MiB
nouveau [ DRM] GART: 512 MiB
nouveau [ DRM] BIT BIOS found
nouveau [ DRM] Bios version 70.18.5f.00
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 01000302 00020030
nouveau [ DRM] DCB outp 01: 02000300 00000000
nouveau [ DRM] DCB outp 02: 02011362 00020010
nouveau [ DRM] DCB outp 03: 01022310 00000000
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 00002161
nouveau [ DRM] DCB conn 02: 00000200
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] 3 available performance level(s)
nouveau [ DRM] 0: core 135MHz shader 270MHz memory 135MHz voltage 850mV
nouveau [ DRM] 1: core 405MHz shader 810MHz memory 405MHz voltage 900mV
nouveau [ DRM] 3: core 589MHz shader 1402MHz memory 600MHz voltage 1000mV
nouveau [ DRM] c: core 405MHz shader 810MHz memory 405MHz voltage 900mV
nouveau [ DRM] MM: using COPY for buffer copies
nouveau [ DRM] allocated 1680x1050 fb: 0x70000, bo ffff8808116ac000
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: failsafe main process (963) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1370327560.480:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1077 comm="apparmor_parser"
type=1400 audit(1370327560.480:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1074 comm="apparmor_parser"
type=1400 audit(1370327560.480:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1071 comm="apparmor_parser"
type=1400 audit(1370327560.480:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1074 comm="apparmor_parser"
ppdev: user-space parallel port driver
init: avahi-cups-reload main process (1085) terminated with status 1
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Bridge firewalling registered
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
cgroup: libvirtd (1555) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root.
cgroup: libvirtd (1555) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: libvirtd (1555) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
systemd-hostnamed[2668]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x002001f2c4 Put 0x0020022ff4 IbGet 0x000001df IbPut 0x000001e0 State 0x80004861 (err: INVALID_CMD) Push 0x00502031
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x0020022ff4 Put 0x0020022ff4 IbGet 0x000001df IbPut 0x000001e2 State 0x80000000 (err: INVALID_CMD) Push 0x00400040
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x00200386a8 Put 0x002003afe8 IbGet 0x000003fa IbPut 0x000003fb State 0x80004861 (err: INVALID_CMD) Push 0x00502031
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x002003afe8 Put 0x002003afe8 IbGet 0x000003fa IbPut 0x000003fb State 0x80000000 (err: INVALID_CMD) Push 0x00400040
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x002002fda0 Put 0x0020032ff4 IbGet 0x00000338 IbPut 0x00000339 State 0x80004861 (err: INVALID_CMD) Push 0x00502031
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x0020032ff4 Put 0x0020032ff4 IbGet 0x00000338 IbPut 0x00000339 State 0x80000000 (err: INVALID_CMD) Push 0x00400040
nouveau E[ PGRAPH][0000:01:00.0] DATA_ERROR INVALID_VALUE
nouveau E[ PGRAPH][0000:01:00.0] DATA_ERROR
nouveau E[ PGRAPH][0000:01:00.0] ch 2 [0x003fb34000] subc 2 class 0x502d mthd 0x0280 data 0x40104860
nouveau E[ PGRAPH][0000:01:00.0] DATA_ERROR INVALID_VALUE
nouveau E[ PGRAPH][0000:01:00.0] DATA_ERROR
nouveau E[ PGRAPH][0000:01:00.0] ch 2 [0x003fb34000] subc 2 class 0x502d mthd 0x0284 data 0xffffffff
nouveau E[ PGRAPH][0000:01:00.0] DATA_ERROR INVALID_VALUE
nouveau E[ PGRAPH][0000:01:00.0] DATA_ERROR
nouveau E[ PGRAPH][0000:01:00.0] ch 2 [0x003fb34000] subc 2 class 0x502d mthd 0x0288 data 0xffffffff
nouveau E[ PGRAPH][0000:01:00.0] DATA_ERROR INVALID_VALUE
nouveau E[ PGRAPH][0000:01:00.0] DATA_ERROR
nouveau E[ PGRAPH][0000:01:00.0] ch 2 [0x003fb34000] subc 2 class 0x502d mthd 0x028c data 0xffffffff
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x00200295a4 Put 0x002002aff8 IbGet 0x00000343 IbPut 0x00000344 State 0x80004861 (err: INVALID_CMD) Push 0x00400040
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x0020030180 Put 0x0020032fec IbGet 0x00000376 IbPut 0x00000377 State 0x80004861 (err: INVALID_CMD) Push 0x00702031
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x0020032fec Put 0x0020032fec IbGet 0x00000376 IbPut 0x00000377 State 0x80000000 (err: INVALID_CMD) Push 0x00400040
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x0020030da4 Put 0x0020032ff4 IbGet 0x0000036d IbPut 0x00000370 State 0x80004861 (err: INVALID_CMD) Push 0x00400040
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x00200216d0 Put 0x0020022fe8 IbGet 0x000002e7 IbPut 0x000002ea State 0x80004861 (err: INVALID_CMD) Push 0x00400040
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x002003a3d8 Put 0x002003aff8 IbGet 0x000002c4 IbPut 0x000002c7 State 0x80004861 (err: INVALID_CMD) Push 0x00400040
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x0020031470 Put 0x0020032ff0 IbGet 0x0000007c IbPut 0x0000007d State 0x80004861 (err: INVALID_CMD) Push 0x00502031
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x002000eee0 Put 0x002000eefc IbGet 0x0000007d IbPut 0x0000007f State 0x80000000 (err: INVALID_CMD) Push 0x00400040
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x00200206e4 Put 0x0020022fec IbGet 0x00000300 IbPut 0x00000301 State 0x80004861 (err: INVALID_CMD) Push 0x00502031
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x0020016124 Put 0x0020016140 IbGet 0x00000301 IbPut 0x00000301 State 0x80000000 (err: INVALID_CMD) Push 0x00400040
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x0020031718 Put 0x0020032ff0 IbGet 0x00000398 IbPut 0x00000399 State 0x80004861 (err: INVALID_CMD) Push 0x00702031
nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x00200169f8 Put 0x0020016a14 IbGet 0x00000399 IbPut 0x00000399 State 0x80000000 (err: INVALID_CMD) Push 0x00400040
systemd-hostnamed[4548]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[Hardware Error]: MC1 Error: Parity error during data load from IC.
[Hardware Error]: Error Status: Corrected error, no action required.
[Hardware Error]: CPU:6 (15:2:0) MC1_STATUS[-|CE|MiscV|-|AddrV|-|-]: 0x8c00002000010151
[Hardware Error]: MC1_ADDR: 0x0000000000400e82
[Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link up
systemd-hostnamed[5388]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!