dmesg - introductory_test-2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-23-generic (buildd@batsu) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #34-Ubuntu SMP Wed May 29 20:22:58 UTC 2013 (Ubuntu 3.8.0-23.34-generic 3.8.11)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000cf678fff] usable
BIOS-e820: [mem 0x00000000cf679000-0x00000000cf68efff] reserved
BIOS-e820: [mem 0x00000000cf68f000-0x00000000cf6cdfff] ACPI data
BIOS-e820: [mem 0x00000000cf6ce000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Dell Inc. PowerEdge R710/00NH4P, BIOS 2.1.9 05/21/2010
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00C0000000 mask FFF0000000 write-back
3 base 0100000000 mask FF00000000 write-back
4 base 0200000000 mask FFE0000000 write-back
5 base 0220000000 mask FFF0000000 write-back
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf679 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0xcf678fff]
[mem 0x00000000-0xcf5fffff] page 2M
[mem 0xcf600000-0xcf678fff] page 4k
kernel direct mapping tables up to 0xcf678fff @ [mem 0x1fffa000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x22fffffff]
[mem 0x100000000-0x22fffffff] page 2M
kernel direct mapping tables up to 0x22fffffff @ [mem 0xcf673000-0xcf678fff]
RAMDISK: [mem 0x36120000-0x37087fff]
ACPI: RSDP 00000000000f0a90 00024 (v02 DELL )
ACPI: XSDT 00000000000f0b94 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000cf6b3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000cf68f000 03D5A (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 00000000cf6b6000 00040
ACPI: APIC 00000000cf6b3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000cf6b35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000cf6b362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DMAR 00000000cf6b3668 001C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000cf6b38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000cf6b3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000cf6b3a3c 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 00000000cf692edc 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 00000000cf69314c 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 00000000cf692d5c 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 00000000cf692d8c 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 00000000cf6b3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 00000000cf6b3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 00000000cf6b7000 00F08 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 1 -> APIC 0x10 -> Node 0
SRAT: PXM 2 -> APIC 0x00 -> Node 1
SRAT: PXM 1 -> APIC 0x14 -> Node 0
SRAT: PXM 2 -> APIC 0x04 -> Node 1
SRAT: Node 1 PXM 2 [mem 0x00000000-0xcfffffff]
SRAT: Node 1 PXM 2 [mem 0x100000000-0x12fffffff]
SRAT: Node 0 PXM 1 [mem 0x130000000-0x22fffffff]
NUMA: Node 1 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x12fffffff] -> [mem 0x00000000-0x12fffffff]
Initmem setup node 0 [mem 0x130000000-0x22fffffff]
NODE_DATA [mem 0x22fffb000-0x22fffffff]
Initmem setup node 1 [mem 0x00000000-0x12fffffff]
NODE_DATA [mem 0x12fffb000-0x12fffffff]
[ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012be00000-ffff88012fdfffff] on node 1
[ffffea0004c00000-ffffea0008bfffff] PMD -> [ffff88022b600000-ffff88022f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x22fffffff]
Movable zone start for each node
Early memory node ranges
node 1: [mem 0x00010000-0x0009ffff]
node 1: [mem 0x00100000-0xcf678fff]
node 1: [mem 0x100000000-0x12fffffff]
node 0: [mem 0x130000000-0x22fffffff]
On node 0 totalpages: 1048576
Normal zone: 16384 pages used for memmap
Normal zone: 1032192 pages, LIFO batch:31
On node 1 totalpages: 1046025
DMA zone: 64 pages used for memmap
DMA zone: 8 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 13210 pages used for memmap
DMA32 zone: 832223 pages, LIFO batch:31
Normal zone: 3072 pages used for memmap
Normal zone: 193536 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x25] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x26] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x27] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 32 CPUs, 28 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000cf679000 - 00000000cf68f000
PM: Registered nosave memory: 00000000cf68f000 - 00000000cf6ce000
PM: Registered nosave memory: 00000000cf6ce000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 28 pages/cpu @ffff88012bc00000 s85056 r8192 d21440 u131072
pcpu-alloc: s85056 r8192 d21440 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31
Built 2 zonelists in Node order, mobility grouping on. Total pages: 2061863
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8145936k/9175040k available (7006k kernel code, 796636k absent, 232468k reserved, 6237k data, 996k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32.
NR_IRQS:16640 nr_irqs:1480 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Enabling automatic NUMA balancing. Configure with numa_balancing= or sysctl
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1995.080 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.16 BogoMIPS (lpj=7980320)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26693 entries in 105 pages
dmar: Host address width 40
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020fe
dmar: RMRR base: 0x000000cf7c8000 end: 0x000000cf7dffff
dmar: RMRR base: 0x000000cf7b1000 end: 0x000000cf7bffff
dmar: RMRR base: 0x000000cf7a1000 end: 0x000000cf7a1fff
dmar: RMRR base: 0x000000cf7a3000 end: 0x000000cf7a3fff
dmar: RMRR base: 0x000000cf7a5000 end: 0x000000cf7a5fff
dmar: RMRR base: 0x000000cf7a7000 end: 0x000000cf7a7fff
dmar: RMRR base: 0x000000cf7c0000 end: 0x000000cf7c0fff
dmar: RMRR base: 0x000000cf7c2000 end: 0x000000cf7c2fff
dmar: ATSR flags: 0x0
IOAPIC id 0 under DRHD base 0xfed90000 IOMMU 0
IOAPIC id 1 under DRHD base 0xfed90000 IOMMU 0
Enabled IRQ remapping in xapic mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5503 @ 2.00GHz (fam: 06, model: 1a, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 1, Processors #1 OK
smpboot: Booting Node 0, Processors #2 OK
smpboot: Booting Node 1, Processors #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (15960.12 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfdffffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:340b] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:340c] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [8086:340d] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 20: [io 0xec40-0xec5f]
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 20: [io 0xec60-0xec7f]
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 10: [mem 0xdf0ff800-0xdf0ffbff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0xec80-0xec9f]
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0xeca0-0xecbf]
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xdf0ffc00-0xdf0fffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f
pci 0000:00:1f.2: reg 10: [io 0xec10-0xec17]
pci 0000:00:1f.2: reg 14: [io 0xec08-0xec0b]
pci 0000:00:1f.2: reg 18: [io 0xec18-0xec1f]
pci 0000:00:1f.2: reg 1c: [io 0xec0c-0xec0f]
pci 0000:00:1f.2: reg 20: [io 0xec20-0xec2f]
pci 0000:00:1f.2: reg 24: [io 0xec30-0xec3f]
pci 0000:01:00.0: [14e4:1639] type 00 class 0x020000
pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd3ffffff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: [14e4:1639] type 00 class 0x020000
pci 0000:01:00.1: reg 10: [mem 0xd4000000-0xd5ffffff 64bit]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd5ffffff]
pci 0000:02:00.0: [14e4:1639] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [mem 0xd6000000-0xd7ffffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: [14e4:1639] type 00 class 0x020000
pci 0000:02:00.1: reg 10: [mem 0xd8000000-0xd9ffffff 64bit]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [mem 0xd6000000-0xd9ffffff]
pci 0000:03:00.0: [1000:0060] type 00 class 0x010400
pci 0000:03:00.0: reg 10: [mem 0xdf180000-0xdf1bffff 64bit]
pci 0000:03:00.0: reg 18: [io 0xfc00-0xfcff]
pci 0000:03:00.0: reg 1c: [mem 0xdf1c0000-0xdf1fffff 64bit]
pci 0000:03:00.0: reg 30: [mem 0xdf100000-0xdf107fff pref]
pci 0000:03:00.0: supports D1
pci 0000:00:04.0: PCI bridge to [bus 03]
pci 0000:00:04.0: bridge window [io 0xf000-0xffff]
pci 0000:00:04.0: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:04:00.0: [14e4:1639] type 00 class 0x020000
pci 0000:04:00.0: reg 10: [mem 0xda000000-0xdbffffff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: [14e4:1639] type 00 class 0x020000
pci 0000:04:00.1: reg 10: [mem 0xdc000000-0xddffffff 64bit]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 04]
pci 0000:00:05.0: bridge window [mem 0xda000000-0xddffffff]
pci 0000:00:06.0: PCI bridge to [bus 05]
pci 0000:00:07.0: PCI bridge to [bus 06]
pci 0000:00:09.0: PCI bridge to [bus 07]
pci 0000:08:03.0: [102b:0532] type 00 class 0x030000
pci 0000:08:03.0: reg 10: [mem 0xd1800000-0xd1ffffff pref]
pci 0000:08:03.0: reg 14: [mem 0xde7fc000-0xde7fffff]
pci 0000:08:03.0: reg 18: [mem 0xde800000-0xdeffffff]
pci 0000:08:03.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:00:1e.0: bridge window [mem 0xd1800000-0xd1ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfdffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
pci0000:00: Requesting ACPI _OSC control (0x15)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
vgaarb: device added: PCI:0000:08:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:08:03.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus fe
PCI: root bus fe: using default resources
PCI: Probing PCI hardware (bus fe)
PCI host bridge to bus 0000:fe
pci_bus 0000:fe: root bus resource [io 0x0000-0xffff]
pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
pci 0000:fe:00.0: [8086:2c40] type 00 class 0x060000
pci 0000:fe:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:fe:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:fe:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:fe:02.4: [8086:2c14] type 00 class 0x060000
pci 0000:fe:02.5: [8086:2c15] type 00 class 0x060000
pci 0000:fe:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:fe:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:fe:03.2: [8086:2c1a] type 00 class 0x060000
pci 0000:fe:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:fe:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:fe:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:fe:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:fe:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:fe:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:fe:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:fe:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:fe:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:fe:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:fe:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:fe:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:fe:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci 0000:ff:00.0: [8086:2c40] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:ff:02.4: [8086:2c14] type 00 class 0x060000
pci 0000:ff:02.5: [8086:2c15] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:ff:03.2: [8086:2c1a] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xcf679000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:06: [io 0x0880-0x08ff] has been reserved
system 00:06: [io 0x0900-0x091f] has been reserved
system 00:06: [io 0x0920-0x0923] has been reserved
system 00:06: [io 0x0924] has been reserved
system 00:06: [io 0x0c00-0x0c7f] has been reserved
system 00:06: [io 0x0ca0-0x0ca7] has been reserved
system 00:06: [io 0x0ca9-0x0cab] has been reserved
system 00:06: [io 0x0cad-0x0caf] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:07: [irq 0 disabled]
system 00:07: [io 0x0ca8] has been reserved
system 00:07: [io 0x0cac] has been reserved
system 00:07: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:0a: [mem 0xfed90000-0xfed91fff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd5ffffff]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [mem 0xd6000000-0xd9ffffff]
pci 0000:00:04.0: PCI bridge to [bus 03]
pci 0000:00:04.0: bridge window [io 0xf000-0xffff]
pci 0000:00:04.0: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:00:05.0: PCI bridge to [bus 04]
pci 0000:00:05.0: bridge window [mem 0xda000000-0xddffffff]
pci 0000:00:06.0: PCI bridge to [bus 05]
pci 0000:00:07.0: PCI bridge to [bus 06]
pci 0000:00:09.0: PCI bridge to [bus 07]
pci 0000:08:03.0: BAR 6: assigned [mem 0xde000000-0xde00ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 08]
pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:00:1e.0: bridge window [mem 0xd1800000-0xd1ffffff 64bit pref]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfdffffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd5ffffff]
pci_bus 0000:02: resource 1 [mem 0xd6000000-0xd9ffffff]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:04: resource 1 [mem 0xda000000-0xddffffff]
pci_bus 0000:08: resource 1 [mem 0xde000000-0xdeffffff]
pci_bus 0000:08: resource 2 [mem 0xd1800000-0xd1ffffff 64bit pref]
pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 7 [mem 0xd0000000-0xfdffffff]
pci_bus 0000:08: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:fe: resource 4 [io 0x0000-0xffff]
pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:08:03.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15776k freed
dmar: Device scope device [0000:00:1a.02] not found
dmar: Device scope device [0000:00:1d.02] not found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcb673000-0xcf673000] (64MB) mapped at [ffff8800cb673000-ffff8800cf672fff]
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1369991407.632:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 15940
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 73 for MSI/MSI-X
pcieport 0000:00:03.0: irq 74 for MSI/MSI-X
pcieport 0000:00:04.0: irq 75 for MSI/MSI-X
pcieport 0000:00:05.0: irq 76 for MSI/MSI-X
pcieport 0000:00:06.0: irq 77 for MSI/MSI-X
pcieport 0000:00:07.0: irq 78 for MSI/MSI-X
pcieport 0000:00:09.0: irq 79 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
P0 -- P1 -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xec10 ctl 0xec08 bmdma 0xec20 irq 23
ata2: SATA max UDMA/133 cmd 0xec18 ctl 0xec0c bmdma 0xec28 irq 23
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 19, io mem 0xdf0ff800
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-23-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 21, io mem 0xdf0ffc00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-23-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-23-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-23-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-23-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.0-23-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 56e46bc0cb04523939d9ba580c4ec55a355d1a93'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:03: setting system clock to 2013-05-31 09:10:08 UTC (1369991408)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 1-3: new high-speed USB device number 3 using ehci-pci
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L633C, D250, max UDMA/100
ata1.00: applying bridge limits
usb 1-3: New USB device found, idVendor=0424, idProduct=2514
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633C D250 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/62x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
tsc: Refined TSC clocksource calibration: 1994.999 MHz
Switching to clocksource tsc
ata2: failed to resume link (SControl 0)
ata2: SATA link down (SStatus 4 SControl 0)
Freeing unused kernel memory: 996k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1176k freed
Freeing unused kernel memory: 1080k freed
udevd[112]: starting version 175
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012)
bnx2 0000:01:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d2000000, IRQ 36, node addr 84:2b:2b:16:e3:75
bnx2 0000:01:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d4000000, IRQ 48, node addr 84:2b:2b:16:e3:77
bnx2 0000:02:00.0 eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 32, node addr 84:2b:2b:16:e3:79
bnx2 0000:02:00.1 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 42, node addr 84:2b:2b:16:e3:7b
bnx2 0000:04:00.0 eth4: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 34, node addr 00:10:18:7d:67:d4
bnx2 0000:04:00.1 eth5: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 44, node addr 00:10:18:7d:67:d6
megasas: 06.504.01.00-rc1 Mon. Oct. 1 17:00:00 PDT 2012
megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 3:slot 0:func 0
megasas: FW now in Ready state
usb 3-1: new low-speed USB device number 2 using uhci_hcd
megasas_init_mfi: fw_support_ieee=0
megasas: INIT adapter done
scsi2 : LSI SAS based MegaRAID driver
scsi 2:0:0:0: Direct-Access SEAGATE ST9146803SS FS63 PQ: 0 ANSI: 5
scsi 2:0:1:0: Direct-Access SEAGATE ST9146803SS FS63 PQ: 0 ANSI: 5
scsi 2:0:2:0: Direct-Access SEAGATE ST9146803SS FS63 PQ: 0 ANSI: 5
scsi 2:0:3:0: Direct-Access SEAGATE ST9146803SS FS63 PQ: 0 ANSI: 5
scsi 2:0:4:0: Direct-Access SEAGATE ST9146803SS FS63 PQ: 0 ANSI: 5
scsi 2:0:5:0: Direct-Access SEAGATE ST9146803SS FS63 PQ: 0 ANSI: 5
scsi 2:0:6:0: Direct-Access SEAGATE ST9146803SS FS63 PQ: 0 ANSI: 5
scsi 2:0:7:0: Direct-Access SEAGATE ST9146803SS FS63 PQ: 0 ANSI: 5
usb 3-1: New USB device found, idVendor=14dd, idProduct=1007
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=7
usb 3-1: Product: D2CIM-DVUSB
usb 3-1: Manufacturer: Raritan
usb 3-1: SerialNumber: PQ218021810000007
scsi 2:0:32:0: Enclosure DP BACKPLANE 1.07 PQ: 0 ANSI: 5
scsi 2:2:0:0: Direct-Access DELL PERC 6/i 1.22 PQ: 0 ANSI: 5
scsi 2:0:32:0: Attached scsi generic sg1 type 13
sd 2:2:0:0: [sda] 1998323712 512-byte logical blocks: (1.02 TB/952 GiB)
sd 2:2:0:0: Attached scsi generic sg2 type 0
sd 2:2:0:0: [sda] Write Protect is off
sd 2:2:0:0: [sda] Mode Sense: 1f 00 10 08
sd 2:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sda: sda1 sda2 < sda5 >
sd 2:2:0:0: [sda] Attached SCSI disk
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Raritan D2CIM-DVUSB as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input1
hid-generic 0003:14DD:1007.0001: input,hidraw0: USB HID v1.10 Keyboard [Raritan D2CIM-DVUSB] on usb-0000:00:1a.0-1/input0
input: Raritan D2CIM-DVUSB as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input2
hid-generic 0003:14DD:1007.0002: input,hidraw1: USB HID v1.10 Mouse [Raritan D2CIM-DVUSB] on usb-0000:00:1a.0-1/input1
input: Raritan D2CIM-DVUSB as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.2/input/input3
hid-generic 0003:14DD:1007.0003: input,hidraw2: USB HID v1.10 Mouse [Raritan D2CIM-DVUSB] on usb-0000:00:1a.0-1/input2
usb 5-2: new full-speed USB device number 2 using uhci_hcd
ses 2:0:32:0: Attached Enclosure device
usb 5-2: New USB device found, idVendor=0624, idProduct=0248
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: USB Composite Device-0
usb 5-2: Manufacturer: Avocent
usb 5-2: SerialNumber: 20080519
input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input4
hid-generic 0003:0624:0248.0004: input,hidraw3: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input5
hid-generic 0003:0624:0248.0005: input,hidraw4: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
usb 1-3.4: new high-speed USB device number 4 using ehci-pci
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-3.4: New USB device found, idVendor=058f, idProduct=6335
usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.4: Product: Mass Storage Device
usb 1-3.4: Manufacturer: Generic
usb 1-3.4: SerialNumber: 058F63356336
Adding 8376316k swap on /dev/sda5. Priority:-1 extents:1 across:8376316k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth5: link is not ready
udevd[411]: starting version 175
type=1400 audit(1369991412.662:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=599 comm="apparmor_parser"
EDAC MC: Ver: 3.0.0
type=1400 audit(1369991412.662:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=599 comm="apparmor_parser"
type=1400 audit(1369991412.662:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=599 comm="apparmor_parser"
type=1400 audit(1369991412.666:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=607 comm="apparmor_parser"
Disabling lock debugging due to kernel taint
microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x11
EDAC MC1: Giving out device to 'i7core_edac.c' 'i7 core #1': DEV 0000:fe:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:fe:03.0' (POLLED)
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0
EDAC PCI1: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
EDAC i7core: Driver loaded, 2 memory controller(s) found.
ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20121018/exfield-299)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff88012a60db18), AE_AML_BUFFER_LIMIT (20121018/psparse-537)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff88012a60da78), AE_AML_BUFFER_LIMIT (20121018/psparse-537)
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMC (20121018/power_meter-753)
lp: driver loaded but no devices found
Initializing USB Mass Storage driver...
scsi3 : usb-storage 1-3.4:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x11
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x11
microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x11
microcode: Microcode Update Driver: v2.00 , Peter Oruba
gpio_ich: GPIO from 195 to 255 on gpio_ich
bonding: bond0: Setting MII monitoring interval to 100.
bonding: bond0: setting mode to 802.3ad (4).
bonding: bond0: Setting LACP rate to fast (1).
IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd1800000, mapped to 0xffffc90011200000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
bonding: bond0: Adding slave em3.
bnx2 0000:02:00.0: irq 80 for MSI/MSI-X
bnx2 0000:02:00.0: irq 81 for MSI/MSI-X
bnx2 0000:02:00.0: irq 82 for MSI/MSI-X
bnx2 0000:02:00.0: irq 83 for MSI/MSI-X
bnx2 0000:02:00.0: irq 84 for MSI/MSI-X
bnx2 0000:02:00.0: irq 85 for MSI/MSI-X
bnx2 0000:02:00.0 em3: using MSIX
bonding: bond0: enslaving em3 as a backup interface with a down link.
bonding: bond0: Adding slave em1.
bnx2 0000:01:00.0: irq 86 for MSI/MSI-X
bnx2 0000:01:00.0: irq 87 for MSI/MSI-X
bnx2 0000:01:00.0: irq 88 for MSI/MSI-X
bnx2 0000:01:00.0: irq 89 for MSI/MSI-X
bnx2 0000:01:00.0: irq 90 for MSI/MSI-X
bnx2 0000:01:00.0: irq 91 for MSI/MSI-X
bnx2 0000:01:00.0 em1: using MSIX
bonding: bond0: enslaving em1 as a backup interface with a down link.
bonding: bond0: Adding slave em2.
bnx2 0000:01:00.1: irq 92 for MSI/MSI-X
bnx2 0000:01:00.1: irq 93 for MSI/MSI-X
bnx2 0000:01:00.1: irq 94 for MSI/MSI-X
bnx2 0000:01:00.1: irq 95 for MSI/MSI-X
bnx2 0000:01:00.1: irq 96 for MSI/MSI-X
bnx2 0000:01:00.1: irq 97 for MSI/MSI-X
bnx2 0000:01:00.1 em2: using MSIX
bonding: bond0: enslaving em2 as a backup interface with a down link.
init: failsafe main process (869) killed by TERM signal
type=1400 audit(1369991413.322:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1252 comm="apparmor_parser"
type=1400 audit(1369991413.322:7): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1250 comm="apparmor_parser"
type=1400 audit(1369991413.322:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1249 comm="apparmor_parser"
type=1400 audit(1369991413.326:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1249 comm="apparmor_parser"
type=1400 audit(1369991413.326:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1249 comm="apparmor_parser"
scsi 3:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdb] 1953792 512-byte logical blocks: (1.00 GB/954 MiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb:
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Attached SCSI removable disk
bnx2 0000:02:00.0 em3: NIC Copper Link is Up, 1000 Mbps full duplex
, receive & transmit flow control ON
bnx2 0000:01:00.1 em2: NIC Copper Link is Up, 1000 Mbps full duplex
, receive & transmit flow control ON
bnx2 0000:01:00.0 em1: NIC Copper Link is Up, 1000 Mbps full duplex
, receive & transmit flow control ON
bonding: bond0: link status definitely up for interface em3, 1000 Mbps full duplex.
bonding: bond0: link status definitely up for interface em1, 1000 Mbps full duplex.
bonding: bond0: link status definitely up for interface em2, 1000 Mbps full duplex.
IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready