dmesg - cesar31052013
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000006fecffff] usable
BIOS-e820: [mem 0x000000006fed0000-0x000000006fee4fff] ACPI data
BIOS-e820: [mem 0x000000006fee5000-0x000000006fee5fff] ACPI NVS
BIOS-e820: [mem 0x000000006fee6000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
DMI present.
DMI: Hewlett-Packard Compaq Presario CQ50 Notebook PC/360A, BIOS F.54 08/18/2009
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x6fed0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DBFFF uncachable
DC000-DFFFF write-protect
E0000-E3FFF uncachable
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000f7ff0-0x000f7fff] mapped at [ffff8800000f7ff0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x6fecffff]
[mem 0x00000000-0x6fdfffff] page 2M
[mem 0x6fe00000-0x6fecffff] page 4k
kernel direct mapping tables up to 0x6fecffff @ [mem 0x1fffc000-0x1fffffff]
RAMDISK: [mem 0x36a50000-0x3751ffff]
ACPI: RSDP 00000000000f7f30 00024 (v03 HPQOEM)
ACPI: XSDT 000000006fedde62 0005C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
ACPI: FACP 000000006fee4b29 000F4 (v03 HPQOEM SLIC-MPC 06040000 PTL_ 000F4240)
ACPI: DSDT 000000006feddebe 06BF7 (v01 HPQOEM SLIC-MPC 06040000 MSFT 03000000)
ACPI: FACS 000000006fee5fc0 00040
ACPI: SLIC 000000006fee4c1d 00176 (v01 HPQOEM SLIC-MPC 06040000 HPQ 00000001)
ACPI: MCFG 000000006fee4d93 0003C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
ACPI: HPET 000000006fee4dcf 00038 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
ACPI: APIC 000000006fee4e07 00064 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
ACPI: BOOT 000000006fee4e6b 00028 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
ACPI: SSDT 000000006fee4e93 0016D (v01 HPQOEM SLIC-MP 06040000 00000150)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000006fecffff]
Initmem setup node 0 [mem 0x00000000-0x6fecffff]
NODE_DATA [mem 0x6fecc000-0x6fecffff]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88006da00000-ffff88006f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009dfff]
node 0: [mem 0x00100000-0x6fecffff]
On node 0 totalpages: 458334
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 7100 pages used for memmap
DMA32 zone: 447252 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88006fc00000 s83584 r8192 d22912 u2097152
pcpu-alloc: s83584 r8192 d22912 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
Built 1 zonelists in Node order, mobility grouping on. Total pages: 451164
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1777632k/1833792k available (6711k kernel code, 456k absent, 55704k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:256 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 7340032 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1999.918 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.83 BogoMIPS (lpj=7999672)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 006ff00000
mce: CPU supports 5 MCE banks
SMP alternatives: switching to UP code
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD Sempron(tm) SI-40 stepping 01
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Brought up 1 CPUs
Total of 1 processors activated (3999.83 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x6fee5000-0x6fee5fff] (4096 bytes)
dummy:
RTC time: 21:26:51, date: 05/31/13
NET: Registered protocol family 16
TOM: 0000000080000000 aka 2048M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-08] at [mem 0xe0000000-0xe08fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe08fffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x2a, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000c0000-0x000c3fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000c4000-0x000c7fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000c8000-0x000cbfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000cc000-0x000cffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000e8000-0x000ebfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000ec000-0x000effff]
pci_root PNP0A08:00: >host bridge window [mem 0x000f0000-0x000fffff]
pci_root PNP0A08:00: >host bridge window [mem 0x80000000-0xfebfffff]
pci_root PNP0A08:00: >ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce1ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: >root bus resource [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: >root bus resource [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: >root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: >root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: >root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: >root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: >root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: >root bus resource [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: >root bus resource [mem 0x000ec000-0x000effff]
pci_bus 0000:00: >root bus resource [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: >root bus resource [mem 0x80000000-0xfebfffff]
pci 0000:00:00.0: >[10de:0754] type 00 class 0x050000
pci 0000:00:01.0: >[10de:075e] type 00 class 0x060100
pci 0000:00:01.0: >reg 10: [io 0x1a00-0x1aff]
pci 0000:00:01.1: >[10de:0752] type 00 class 0x0c0500
pci 0000:00:01.1: >reg 10: [io 0x3080-0x30bf]
pci 0000:00:01.1: >reg 20: [io 0x3040-0x307f]
pci 0000:00:01.1: >reg 24: [io 0x3000-0x303f]
pci 0000:00:01.1: >PME# supported from D3hot D3cold
pci 0000:00:01.3: >[10de:0753] type 00 class 0x0b4000
pci 0000:00:01.3: >reg 10: [mem 0xc0080000-0xc00fffff]
pci 0000:00:01.4: >[10de:0568] type 00 class 0x050000
pci 0000:00:02.0: >[10de:077b] type 00 class 0x0c0310
pci 0000:00:02.0: >reg 10: [mem 0xc0006000-0xc0006fff]
pci 0000:00:02.0: >supports D1 D2
pci 0000:00:02.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: >[10de:077c] type 00 class 0x0c0320
pci 0000:00:02.1: >reg 10: [mem 0xc0007000-0xc00070ff]
pci 0000:00:02.1: >supports D1 D2
pci 0000:00:02.1: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: >[10de:077d] type 00 class 0x0c0310
pci 0000:00:04.0: >reg 10: [mem 0xc0008000-0xc0008fff]
pci 0000:00:04.0: >supports D1 D2
pci 0000:00:04.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: >[10de:077e] type 00 class 0x0c0320
pci 0000:00:04.1: >reg 10: [mem 0xc0007400-0xc00074ff]
pci 0000:00:04.1: >supports D1 D2
pci 0000:00:04.1: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: >[10de:0759] type 00 class 0x01018a
pci 0000:00:06.0: >reg 20: [io 0x30c0-0x30cf]
pci 0000:00:07.0: >[10de:0774] type 00 class 0x040300
pci 0000:00:07.0: >reg 10: [mem 0xc0000000-0xc0003fff]
pci 0000:00:07.0: >PME# supported from D3hot D3cold
pci 0000:00:08.0: >[10de:075a] type 01 class 0x060401
pci 0000:00:09.0: >[10de:0ad0] type 00 class 0x010185
pci 0000:00:09.0: >reg 10: [io 0x30f0-0x30f7]
pci 0000:00:09.0: >reg 14: [io 0x30e4-0x30e7]
pci 0000:00:09.0: >reg 18: [io 0x30e8-0x30ef]
pci 0000:00:09.0: >reg 1c: [io 0x30e0-0x30e3]
pci 0000:00:09.0: >reg 20: [io 0x30d0-0x30df]
pci 0000:00:09.0: >reg 24: [mem 0xc0004000-0xc0005fff]
pci 0000:00:0a.0: >[10de:0760] type 00 class 0x020000
pci 0000:00:0a.0: >reg 10: [mem 0xc0009000-0xc0009fff]
pci 0000:00:0a.0: >reg 14: [io 0x30f8-0x30ff]
pci 0000:00:0a.0: >reg 18: [mem 0xc0007c00-0xc0007cff]
pci 0000:00:0a.0: >reg 1c: [mem 0xc0007800-0xc000780f]
pci 0000:00:0a.0: >supports D1 D2
pci 0000:00:0a.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: >[10de:0569] type 01 class 0x060400
pci 0000:00:0b.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: >[10de:077a] type 01 class 0x060400
pci 0000:00:14.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: >[1022:1300] type 00 class 0x060000
pci 0000:00:18.1: >[1022:1301] type 00 class 0x060000
pci 0000:00:18.2: >[1022:1302] type 00 class 0x060000
pci 0000:00:18.3: >[1022:1303] type 00 class 0x060000
pci 0000:00:18.4: >[1022:1304] type 00 class 0x060000
pci 0000:00:08.0: >PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:08.0: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:08.0: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:08.0: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:08.0: > bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
pci 0000:00:08.0: > bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
pci 0000:00:08.0: > bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
pci 0000:00:08.0: > bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:08.0: > bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:08.0: > bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:08.0: > bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:08.0: > bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:08.0: > bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:08.0: > bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
pci 0000:00:08.0: > bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
pci 0000:00:08.0: > bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
pci 0000:00:08.0: > bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
pci 0000:02:00.0: >[10de:0845] type 00 class 0x030000
pci 0000:02:00.0: >reg 10: [mem 0xc1000000-0xc1ffffff]
pci 0000:02:00.0: >reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: >reg 1c: [mem 0xc4000000-0xc5ffffff 64bit pref]
pci 0000:02:00.0: >reg 24: [io 0x4000-0x407f]
pci 0000:02:00.0: >reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:0b.0: >PCI bridge to [bus 02-02]
pci 0000:00:0b.0: > bridge window [io 0x4000-0x4fff]
pci 0000:00:0b.0: > bridge window [mem 0xc1000000-0xc1ffffff]
pci 0000:00:0b.0: > bridge window [mem 0xc4000000-0xdfffffff 64bit pref]
pci 0000:07:00.0: >[168c:001c] type 00 class 0x020000
pci 0000:07:00.0: >reg 10: [mem 0xc2000000-0xc200ffff 64bit]
pci 0000:07:00.0: >disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:14.0: >PCI bridge to [bus 07-07]
pci 0000:00:14.0: > bridge window [mem 0xc2000000-0xc20fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x08
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [Z012] (IRQs 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [Z013] (IRQs 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z014] (IRQs 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z015] (IRQs 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 18) *10
ACPI: PCI Interrupt Link [LUS0] (IRQs 17) *11
ACPI: PCI Interrupt Link [LUS2] (IRQs 17) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LGPU] (IRQs 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LPID] (IRQs 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSI0] (IRQs 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSI1] (IRQs 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z010] (IRQs 16) *5
ACPI: PCI Interrupt Link [Z011] (IRQs 16) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x6fed0000-0x6fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
pnp 00:00: >[mem 0x000cc000-0x000cffff window]
pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
pnp 00:00: >[mem 0x000dc000-0x000dffff window]
pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
pnp 00:00: >[mem 0x000ec000-0x000effff window]
pnp 00:00: >[mem 0x000f0000-0x000fffff window]
pnp 00:00: >[mem 0x80000000-0xfebfffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[irq 0 disabled]
pnp 00:01: >[irq 8]
pnp 00:01: >[mem 0xfed00000-0xfed003ff]
pnp 00:01: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: >[mem 0xe0000000-0xefffffff]
system 00:02: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:02: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: >[io 0x0010-0x001f]
pnp 00:03: >[io 0x0022-0x003f]
pnp 00:03: >[io 0x0044-0x005f]
pnp 00:03: >[io 0x0063]
pnp 00:03: >[io 0x0065]
pnp 00:03: >[io 0x0067-0x006f]
pnp 00:03: >[io 0x0072-0x0073]
pnp 00:03: >[io 0x0074-0x007f]
pnp 00:03: >[io 0x0080]
pnp 00:03: >[io 0x0084]
pnp 00:03: >[io 0x0091-0x0093]
pnp 00:03: >[io 0x0097-0x009f]
pnp 00:03: >[io 0x00a2-0x00bf]
pnp 00:03: >[io 0x00e0-0x00ef]
pnp 00:03: >[io 0x0360-0x0361]
pnp 00:03: >[io 0x04d0-0x04d1]
pnp 00:03: >[mem 0xff800000-0xff800fff]
system 00:03: >[io 0x0360-0x0361] has been reserved
system 00:03: >[io 0x04d0-0x04d1] has been reserved
system 00:03: >[mem 0xff800000-0xff800fff] has been reserved
system 00:03: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: >[io 0x0000-0x0008]
pnp 00:04: >[io 0x000a-0x000f]
pnp 00:04: >[io 0x0081-0x0083]
pnp 00:04: >[io 0x0087]
pnp 00:04: >[io 0x0089-0x008b]
pnp 00:04: >[io 0x008f]
pnp 00:04: >[io 0x00c0-0x00d1]
pnp 00:04: >[io 0x00d4-0x00df]
pnp 00:04: >[dma 4]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: >[io 0x0061]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: >[io 0x0070-0x0071]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: >[io 0x00f0-0x00f1]
pnp 00:07: >[irq 13]
pnp 00:07: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: >[io 0x0060]
pnp 00:08: >[io 0x0064]
pnp 00:08: >[irq 1]
pnp 00:08: >Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: >[irq 12]
pnp 00:09: >Plug and Play ACPI device, IDs SYN0158 SYN0300 SYN0002 PNP0f13 (active)
pnp 00:0a: >[io 0x1000-0x107f]
pnp 00:0a: >[io 0x1080-0x10ff]
pnp 00:0a: >[io 0x1200-0x127f]
pnp 00:0a: >[io 0x1280-0x12ff]
pnp 00:0a: >[io 0x1400-0x147f]
pnp 00:0a: >[io 0x1480-0x14ff]
system 00:0a: >[io 0x1000-0x107f] has been reserved
system 00:0a: >[io 0x1080-0x10ff] has been reserved
system 00:0a: >[io 0x1200-0x127f] has been reserved
system 00:0a: >[io 0x1280-0x12ff] has been reserved
system 00:0a: >[io 0x1400-0x147f] has been reserved
system 00:0a: >[io 0x1480-0x14ff] has been reserved
system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: >[mem 0xffc00000-0xffffffff]
pnp 00:0b: >[mem 0xfec00000-0xfec00fff]
pnp 00:0b: >[mem 0xfee00000-0xfeefffff]
pnp 00:0b: >[mem 0xfed00000-0xfed00fff]
pnp 00:0b: >[mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0b: >[mem 0xfef00000-0xfef00fff]
pnp 00:0b: >[Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xefffffff]; adding more reservations
system 00:0b: >[mem 0xffc00000-0xffffffff] could not be reserved
system 00:0b: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: >[mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: >[mem 0xfed00000-0xfed00fff] has been reserved
system 00:0b: >[mem 0xfef00000-0xfef00fff] has been reserved
system 00:0b: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:08.0: >PCI bridge to [bus 01-01]
pci 0000:02:00.0: >BAR 6: assigned [mem 0xc6000000-0xc601ffff pref]
pci 0000:00:0b.0: >PCI bridge to [bus 02-02]
pci 0000:00:0b.0: > bridge window [io 0x4000-0x4fff]
pci 0000:00:0b.0: > bridge window [mem 0xc1000000-0xc1ffffff]
pci 0000:00:0b.0: > bridge window [mem 0xc4000000-0xdfffffff 64bit pref]
pci 0000:00:14.0: >PCI bridge to [bus 07-07]
pci 0000:00:14.0: > bridge window [mem 0xc2000000-0xc20fffff]
pci 0000:00:08.0: >setting latency timer to 64
pci 0000:00:0b.0: >setting latency timer to 64
ACPI: PCI Interrupt Link [Z012] enabled at IRQ 23
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: >resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: >resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: >resource 10 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: >resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: >resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: >resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: >resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: >resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: >resource 16 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: >resource 17 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: >resource 18 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: >resource 19 [mem 0x80000000-0xfebfffff]
pci_bus 0000:01: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: >resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:01: >resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:01: >resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:01: >resource 10 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:01: >resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:01: >resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:01: >resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:01: >resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:01: >resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:01: >resource 16 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:01: >resource 17 [mem 0x000ec000-0x000effff]
pci_bus 0000:01: >resource 18 [mem 0x000f0000-0x000fffff]
pci_bus 0000:01: >resource 19 [mem 0x80000000-0xfebfffff]
pci_bus 0000:02: >resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: >resource 1 [mem 0xc1000000-0xc1ffffff]
pci_bus 0000:02: >resource 2 [mem 0xc4000000-0xdfffffff 64bit pref]
pci_bus 0000:07: >resource 1 [mem 0xc2000000-0xc20fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 17
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17
ACPI: PCI Interrupt Link [Z010] enabled at IRQ 16
ACPI: PCI Interrupt Link [Z011] enabled at IRQ 16
pci 0000:00:07.0: >Enabling HT MSI Mapping
pci 0000:00:08.0: >Enabling HT MSI Mapping
pci 0000:00:09.0: >Enabling HT MSI Mapping
pci 0000:00:0a.0: >Enabling HT MSI Mapping
pci 0000:00:0b.0: >Enabling HT MSI Mapping
pci 0000:02:00.0: >Boot video device
PCI: CLS 0 bytes, default 64
Simple Boot Flag at 0x38 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1370035611.324:1): initialized
Trying to unpack rootfs image as initramfs...
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 3471
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Refined TSC clocksource calibration: 1999.999 MHz.
Switching to clocksource tsc
Freeing initrd memory: 11072k freed
thermal LNXTHERM:00: >registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (43 C)
thermal LNXTHERM:01: >registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (43 C)
ACPI: Battery Slot [BAT0] (battery absent)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:09.0: >version 3.0
ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 22
ahci 0000:00:09.0: >irq 40 for MSI/MSI-X
ahci 0000:00:09.0: >controller can't do PMP, turning off CAP_PMP
ahci 0000:00:09.0: >AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl IDE mode
ahci 0000:00:09.0: >flags: 64bit ncq sntf led clo pio slum part boh
ahci 0000:00:09.0: >setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004100 irq 40
ata2: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004180 irq 40
pata_acpi 0000:00:06.0: >setting latency timer to 64
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:02.1: >setting latency timer to 64
ehci_hcd 0000:00:02.1: >EHCI Host Controller
ehci_hcd 0000:00:02.1: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: >debug port 1
ehci_hcd 0000:00:02.1: >cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: >irq 17, io mem 0xc0007000
ACPI: Battery Slot [BAT0] (battery absent)
ehci_hcd 0000:00:02.1: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:02.1
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >3 ports detected
ehci_hcd 0000:00:04.1: >setting latency timer to 64
ehci_hcd 0000:00:04.1: >EHCI Host Controller
ehci_hcd 0000:00:04.1: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:04.1: >debug port 1
ehci_hcd 0000:00:04.1: >cache line size of 64 is not supported
ehci_hcd 0000:00:04.1: >irq 16, io mem 0xc0007400
ehci_hcd 0000:00:04.1: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:04.1
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.0: >setting latency timer to 64
ohci_hcd 0000:00:02.0: >OHCI Host Controller
ohci_hcd 0000:00:02.0: >new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.0: >irq 17, io mem 0xc0006000
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: OHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb3: >SerialNumber: 0000:00:02.0
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >3 ports detected
ohci_hcd 0000:00:04.0: >setting latency timer to 64
ohci_hcd 0000:00:04.0: >OHCI Host Controller
ohci_hcd 0000:00:04.0: >new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:04.0: >irq 16, io mem 0xc0008000
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: OHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb4: >SerialNumber: 0000:00:04.0
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: >RTC can wake from S4
rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 13:925:450
machinecheck: >hash matches
rtc_cmos 00:06: >setting system clock to 2013-05-31 21:26:55 UTC (1370035615)
powernow-k8: Found 1 AMD Sempron(tm) SI-40 (1 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (2000 MHz)
powernow-k8: 1 : pstate 1 (1000 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7: ST980811AS, 3.BHD, max UDMA/100
ata2.00: 156301488 sectors, multi 16: LBA48
ata2.00: configured for UDMA/100
usb 1-1: >new high-speed USB device number 2 using ehci_hcd
ata1.00: ATAPI: Optiarc DVD RW AD-7561S, AH03, max UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: >CD-ROM Optiarc DVD RW AD-7561S AH03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: >Attached scsi CD-ROM sr0
sr 0:0:0:0: >Attached scsi generic sg0 type 5
scsi 1:0:0:0: >Direct-Access ATA ST980811AS 3.BH PQ: 0 ANSI: 5
sd 1:0:0:0: >Attached scsi generic sg1 type 0
sd 1:0:0:0: >[sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 1:0:0:0: >[sda] Write Protect is off
sd 1:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 1:0:0:0: >[sda] Attached SCSI disk
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[88]: starting version 175
usb 1-1: >New USB device found, idVendor=0bda, idProduct=0158
usb 1-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: >Product: USB2.0-CRW
usb 1-1: >Manufacturer: Generic
usb 1-1: >SerialNumber: 20071114173400000
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver uas
usb 2-2: >new high-speed USB device number 2 using ehci_hcd
scsi2 : usb-storage 1-1:1.0
usbcore: registered new interface driver ums-realtek
pata_amd 0000:00:06.0: >version 0.4.1
pata_amd 0000:00:06.0: >setting latency timer to 64
scsi3 : pata_amd
scsi4 : pata_amd
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
forcedeth 0000:00:0a.0: >setting latency timer to 64
usb 2-2: >New USB device found, idVendor=04f2, idProduct=b091
usb 2-2: >New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 2-2: >Product: CNF7047
usb 2-2: >Manufacturer: Chicony Electronics Co., Ltd.
usb 2-2: >SerialNumber: SN0001
ata4: port disabled--ignoring
forcedeth 0000:00:0a.0: >ifname eth0, PHY OUI 0x732 @ 1, addr 00:1d:72:61:58:44
forcedeth 0000:00:0a.0: >highdma csum pwrctl mgmt lnktim msi desc-v3
scsi 2:0:0:0: >Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: >Attached scsi generic sg2 type 0
kjournald starting. Commit interval 5 seconds
EXT3-fs (loop0): mounted filesystem with ordered data mode
sd 2:0:0:0: >[sdb] Attached SCSI removable disk
Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[377]: starting version 175
EXT3-fs (loop0): using internal journal
i2c i2c-0: >nForce2 SMBus adapter at 0x3040
i2c i2c-1: >nForce2 SMBus adapter at 0x3000
wmi: Mapper loaded
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1370053644.906:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=507 comm="apparmor_parser"
type=1400 audit(1370053644.910:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=507 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
acpi device:12: >registered as cooling_device1
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:10/LNXVIDEO:00/input/input5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux video capture interface: v2.00
cfg80211: Calling CRDA to update world regulatory domain
uvcvideo: Found UVC 1.00 device CNF7047 (04f2:b091)
input: CNF7047 as /devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2:1.0/input/input6
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ath5k 0000:07:00.0: >registered as 'phy0'
[drm] Initialized drm 1.1.0 20060810
microcode: CPU0: patch_level=0x02000057
ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 20
nouveau 0000:02:00.0: >setting latency timer to 64
[drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x0aa280a2)
[drm] nouveau 0000:02:00.0: Checking PRAMIN for VBIOS
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: Using VBIOS from PRAMIN
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 62.77.2f.00
[drm] nouveau 0000:02:00.0: TMDS table version 2.0
[drm] nouveau 0000:02:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:02:00.0: DCB version 4.0
[drm] nouveau 0000:02:00.0: DCB outp 00: 01000323 00010034
[drm] nouveau 0000:02:00.0: DCB outp 01: 02011300 0000001e
[drm] nouveau 0000:02:00.0: DCB outp 02: 02022332 00020010
[drm] nouveau 0000:02:00.0: DCB conn 00: 00000040
[drm] nouveau 0000:02:00.0: DCB conn 01: 00000100
[drm] nouveau 0000:02:00.0: DCB conn 02: 00001261
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD5C5
[drm] nouveau 0000:02:00.0: Register 0x00004028 not found in PLL limits table
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD824
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xD826
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xD90B
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xDA5A
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xDABF
[drm] nouveau 0000:02:00.0: 0xDABF: Condition still not met after 20ms, skipping following opcodes
init: failsafe main process (651) killed by TERM signal
[TTM] Zone kernel: Available graphics memory: 896126 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] nouveau 0000:02:00.0: Detected 256MiB VRAM (DDR1)
[drm] nouveau 0000:02:00.0: Stolen system memory at: 0x0070000000
[drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 19
hda_intel: Disabling MSI
snd_hda_intel 0000:00:07.0: >setting latency timer to 64
type=1400 audit(1370053646.362:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=762 comm="apparmor_parser"
type=1400 audit(1370053646.362:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=762 comm="apparmor_parser"
type=1400 audit(1370053646.466:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=770 comm="apparmor_parser"
type=1400 audit(1370053646.466:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=770 comm="apparmor_parser"
input: HP WMI hotkeys as /devices/virtual/input/input7
forcedeth 0000:00:0a.0: >irq 41 for MSI/MSI-X
forcedeth 0000:00:0a.0: >eth0: MSI enabled
forcedeth 0000:00:0a.0: >eth0: no link during initialization
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
type=1400 audit(1370053646.534:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=780 comm="apparmor_parser"
type=1400 audit(1370053646.538:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=780 comm="apparmor_parser"
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:02:00.0: ACPI backlight interface available, not registering our own
[drm] nouveau 0000:02:00.0: 3 available performance level(s)
[drm] nouveau 0000:02:00.0: 0: core 169MHz shader 338MHz voltage 920mV fanspeed 60%
[drm] nouveau 0000:02:00.0: 1: core 275MHz shader 550MHz voltage 1050mV fanspeed 80%
[drm] nouveau 0000:02:00.0: 3: core 400MHz shader 800MHz voltage 1100mV fanspeed 100%
[drm] nouveau 0000:02:00.0: c:
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[drm] nouveau 0000:02:00.0: MM: using M2MF for buffer copies
[sched_delayed] sched: RT throttling activated
type=1400 audit(1370053648.774:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=783 comm="apparmor_parser"
type=1400 audit(1370053648.774:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=783 comm="apparmor_parser"
psmouse serio2: >synaptics: Touchpad model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000/0x20000
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: Microcode Update Driver: v2.00 , Peter Oruba
hda_codec: CX20561 (Hermosa): BIOS auto-probing.
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
ath: EEPROM regdomain: 0x67
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x67
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
ieee80211 phy0: >Selected rate control algorithm 'minstrel_ht'
Registered led device: ath5k-phy0::rx
Registered led device: ath5k-phy0::tx
ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[drm] nouveau 0000:02:00.0: allocated 1280x800 fb: 0x2f0000, bo ffff8800220dd000
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.0.0 20120316 for 0000:02:00.0 on minor 0
init: alsa-restore main process (856) terminated with status 19
input: HDA NVidia Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
forcedeth 0000:00:0a.0: >irq 41 for MSI/MSI-X
forcedeth 0000:00:0a.0: >eth0: MSI enabled
forcedeth 0000:00:0a.0: >eth0: no link during initialization
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
forcedeth 0000:00:0a.0: >eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
forcedeth 0000:00:0a.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
forcedeth 0000:00:0a.0: >eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
forcedeth 0000:00:0a.0: >eth0: link down
forcedeth 0000:00:0a.0: >eth0: link up
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 2:0:0:0: >[sdb] Asking for cache data failed
sd 2:0:0:0: >[sdb] Assuming drive cache: write through