dmesg - louveau.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-22-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #33-Ubuntu SMP Thu May 16 15:17:14 UTC 2013 (Ubuntu 3.8.0-22.33-generic 3.8.11)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
BIOS-e820: [mem 0x00000000cff80000-0x00000000cff97fff] ACPI data
BIOS-e820: [mem 0x00000000cff98000-0x00000000cffbffff] ACPI NVS
BIOS-e820: [mem 0x00000000cffc0000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/M5A88-V EVO, BIOS 1603 10/12/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000230000000 aka 8960M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcff80 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000094000] 94000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xcff7ffff]
[mem 0x00000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcff7ffff] page 4k
kernel direct mapping tables up to 0xcff7ffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x22fffffff]
[mem 0x100000000-0x1ffffffff] page 1G
[mem 0x200000000-0x22fffffff] page 2M
kernel direct mapping tables up to 0x22fffffff @ [mem 0xcff7e000-0xcff7ffff]
RAMDISK: [mem 0x3411c000-0x36085fff]
ACPI: RSDP 00000000000fbc30 00024 (v02 ACPIAM)
ACPI: XSDT 00000000cff80100 00054 (v01 101212 XSDT1626 20121012 MSFT 00000097)
ACPI: FACP 00000000cff80290 000F4 (v03 101212 FACP1626 20121012 MSFT 00000097)
ACPI: DSDT 00000000cff80460 0F14D (v01 A1867 A1867001 00000001 INTL 20060113)
ACPI: FACS 00000000cff98000 00040
ACPI: APIC 00000000cff80390 0008C (v01 101212 APIC1626 20121012 MSFT 00000097)
ACPI: MCFG 00000000cff80420 0003C (v01 101212 OEMMCFG 20121012 MSFT 00000097)
ACPI: OEMB 00000000cff98040 00072 (v01 101212 OEMB1626 20121012 MSFT 00000097)
ACPI: HPET 00000000cff8f8b0 00038 (v01 101212 OEMHPET 20121012 MSFT 00000097)
ACPI: SSDT 00000000cff8f8f0 008BC (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
Initmem setup node 0 [mem 0x00000000-0x22fffffff]
NODE_DATA [mem 0x22fffb000-0x22fffffff]
[ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x22fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x00099fff]
node 0: [mem 0x00100000-0xcff7ffff]
node 0: [mem 0x100000000-0x22fffffff]
On node 0 totalpages: 2096906
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3908 pages, LIFO batch:0
DMA32 zone: 13246 pages used for memmap
DMA32 zone: 834498 pages, LIFO batch:31
Normal zone: 19456 pages used for memmap
Normal zone: 1225728 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009a000 - 000000000009b000
PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
PM: Registered nosave memory: 00000000cff80000 - 00000000cff98000
PM: Registered nosave memory: 00000000cff98000 - 00000000cffc0000
PM: Registered nosave memory: 00000000cffc0000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
e820: [mem 0xd0000000-0xff9fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s85056 r8192 d21440 u262144
pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064134
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
Memory: 8076068k/9175040k available (7006k kernel code, 787416k absent, 311556k reserved, 6237k data, 996k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3415.188 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6830.37 BogoMIPS (lpj=13660752)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26693 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X4 965 Processor (fam: 10, model: 04, stepping: 03)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
process: System has AMD C1E enabled
process: Switch to broadcast mode on CPU1
process: Switch to broadcast mode on CPU2
smpboot: Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (27321.50 BogoMIPS)
process: Switch to broadcast mode on CPU3
process: Switch to broadcast mode on CPU0
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcff98000-0xcffbffff] (163840 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, febfffff]
node 0 link 0: mmio [fec00000, fffeffff]
node 0 link 0: mmio [ffff0000, ffffffff]
TOM2: 0000000230000000 aka 8960M
bus: [bus 00-1f] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x230000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
pci 0000:00:11.0: reg 24: [mem 0xfe8ffc00-0xfe8fffff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfe8fe000-0xfe8fefff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfe8ff800-0xfe8ff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfe8fd000-0xfe8fdfff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfe8ff400-0xfe8ff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfe8f4000-0xfe8f7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfe8fc000-0xfe8fcfff]
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 10: [mem 0xfe8f3000-0xfe8f3fff]
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 10: [mem 0xfe8ff000-0xfe8ff0ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [1002:6818] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe9c0000-0xfe9fffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xc000-0xc0ff]
pci 0000:01:00.0: reg 30: [mem 0xfe9a0000-0xfe9bffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfe99c000-0xfe99ffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:02:00.0: reg 10: [mem 0xfeaff800-0xfeafffff 64bit]
pci 0000:02:00.0: reg 18: [io 0xd800-0xd8ff]
pci 0000:02:00.0: supports D2
pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
pci 0000:02:00.1: [1106:0415] type 00 class 0x010185
pci 0000:02:00.1: reg 10: [io 0xdc00-0xdc07]
pci 0000:02:00.1: reg 14: [io 0xd480-0xd483]
pci 0000:02:00.1: reg 18: [io 0xd400-0xd407]
pci 0000:02:00.1: reg 1c: [io 0xd080-0xd083]
pci 0000:02:00.1: reg 20: [io 0xd000-0xd00f]
pci 0000:02:00.1: reg 30: [mem 0xfeae0000-0xfeaeffff pref]
pci 0000:02:00.1: supports D2
pci 0000:02:00.1: PME# supported from D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:03:00.0: reg 10: [mem 0xfebf0000-0xfebf7fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:06:00.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:06:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:06:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 06]
pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x040b] has been reserved
system 00:08: [io 0x04d6] has been reserved
system 00:08: [io 0x0c00-0x0c01] has been reserved
system 00:08: [io 0x0c14] has been reserved
system 00:08: [io 0x0c50-0x0c51] has been reserved
system 00:08: [io 0x0c52] has been reserved
system 00:08: [io 0x0c6c] has been reserved
system 00:08: [io 0x0c6f] has been reserved
system 00:08: [io 0x0cd0-0x0cd1] has been reserved
system 00:08: [io 0x0cd2-0x0cd3] has been reserved
system 00:08: [io 0x0cd4-0x0cd5] has been reserved
system 00:08: [io 0x0cd6-0x0cd7] has been reserved
system 00:08: [io 0x0cd8-0x0cdf] has been reserved
system 00:08: [io 0x0b00-0x0b3f] has been reserved
system 00:08: [io 0x0800-0x089f] has been reserved
system 00:08: [io 0x0b00-0x0b1f] has been reserved
system 00:08: [io 0x0b20-0x0b3f] has been reserved
system 00:08: [io 0x0900-0x090f] has been reserved
system 00:08: [io 0x0910-0x091f] has been reserved
system 00:08: [io 0xfe00-0xfefe] has been reserved
system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x0230-0x023f] has been reserved
system 00:09: [io 0x0290-0x029f] has been reserved
system 00:09: [io 0x0300-0x030f] has been reserved
system 00:09: [io 0x0a30-0x0a3f] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.1: PCI bridge to [bus 06]
pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
pci_bus 0000:06: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32168k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1369531556.776:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 15965
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:09.0: irq 41 for MSI/MSI-X
pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
pcieport 0000:00:15.0: irq 43 for MSI/MSI-X
pcieport 0000:00:15.1: irq 44 for MSI/MSI-X
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: processor limited to max C-state 1
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe8ff800
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-22-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfe8ff400
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-22-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfe8ff000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-22-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe8fe000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-22-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8fd000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-22-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe8fc000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.0-22-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe8f3000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.8.0-22-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.8.0-22-generic xhci_hcd
usb usb8: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.8.0-22-generic xhci_hcd
usb usb9: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 7fb074b2e4851c3043f2f3c12342cb419e9d7cc5'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:02: setting system clock to 2013-05-26 01:25:58 UTC (1369531558)
powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 996k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1176k freed
Freeing unused kernel memory: 1080k freed
udevd[112]: starting version 175
pata_via 0000:02:00.1: version 0.3.4
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/133 cmd 0xdc00 ctl 0xd480 bmdma 0xd000 irq 17
ata2: PATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 17
Disabling lock debugging due to kernel taint
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:00.0: irq 50 for MSI/MSI-X
r8169 0000:06:00.0 eth0: RTL8168evl/8111evl at 0xffffc90010e84000, c8:60:00:60:b0:bc, XID 0c900800 IRQ 50
r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi2 : ahci
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6818 0x174B:0xE217).
[drm] register mmio base: 0xFE9C0000
[drm] register mmio size: 262144
ATOM BIOS: PITCAIRN
radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
scsi3 : ahci
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 256bits DDR
scsi4 : ahci
[TTM] Zone kernel: Available graphics memory: 4088732 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 51 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading PITCAIRN Microcode
usb 4-5: new full-speed USB device number 2 using ohci_hcd
firewire_ohci 0000:02:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
scsi5 : ahci
scsi6 : ahci
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88021c892c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88021c892c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88021c892c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88021c892c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88021c892c10
scsi7 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 19
ata7: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff00 irq 19
ata8: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff80 irq 19
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 1 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD4
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD5
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD6
[drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
usb 4-5: New USB device found, idVendor=046d, idProduct=c52e
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-5: Product: USB Receiver
usb 4-5: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input2
hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-5/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/input/input3
hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-5/input1
tsc: Refined TSC clocksource calibration: 3415.320 MHz
Switching to clocksource tsc
[drm] fb mappable at 0xD114B000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB01, max UDMA/100
ata3.00: ATA-8: Hitachi HDS721010DLE630, MS2OA5R0, max UDMA/133
ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/100
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72101 MS2O PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg0 type 0
scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-222AB SB01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
ata8.00: ATA-8: KINGSTON SH103S3120G, 503ABBF0, max UDMA/133
ata8.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
firewire_core 0000:02:00.0: created device fw0: GUID 001e8c0000347e83, S400
ata8.00: configured for UDMA/133
scsi 7:0:0:0: Direct-Access ATA KINGSTON SH103S3 503A PQ: 0 ANSI: 5
sd 7:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: Attached scsi generic sg2 type 0
sdb: sdb1 sdb2 < sdb5 >
sd 7:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
xor: automatically using best checksumming function:
generic_sse: 12576.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
Btrfs loaded
EXT4-fs (sda3): INFO: recovery required on readonly filesystem
EXT4-fs (sda3): write access will be enabled during recovery
EXT4-fs (sda3): recovery complete
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
Adding 2104316k swap on /dev/sda2. Priority:-1 extents:1 across:2104316k
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[674]: starting version 175
type=1400 audit(1369524370.557:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=853 comm="apparmor_parser"
type=1400 audit(1369524370.557:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=852 comm="apparmor_parser"
type=1400 audit(1369524370.557:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=853 comm="apparmor_parser"
type=1400 audit(1369524370.557:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=852 comm="apparmor_parser"
type=1400 audit(1369524370.557:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=853 comm="apparmor_parser"
type=1400 audit(1369524370.557:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=852 comm="apparmor_parser"
MCE: In-kernel MCE decoding enabled.
ATK0110 ATK0110:00: EC enabled
device-mapper: multipath: version 1.5.1 loaded
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20121018/utaddress-251)
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 2 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
it87: Found IT8721F chip at 0x290, revision 3
ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.ECRE 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
EDAC MC: Ver: 3.0.0
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90010efcb00). heartbeat=60 sec (nowayout=0)
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
lp: driver loaded but no devices found
it87: Found IT8721F chip at 0x290, revision 3
ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.ECRE 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ip_tables: (C) 2000-2006 Netfilter Core Team
microcode: CPU0: patch_level=0x010000c8
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
microcode: CPU1: patch_level=0x010000c8
microcode: CPU2: patch_level=0x010000c8
microcode: CPU3: patch_level=0x010000c8
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: irq 52 for MSI/MSI-X
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
ip6_tables: (C) 2000-2006 Netfilter Core Team
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
init: failsafe main process (1159) killed by TERM signal
type=1400 audit(1369524386.689:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1259 comm="apparmor_parser"
type=1400 audit(1369524386.689:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1259 comm="apparmor_parser"
type=1400 audit(1369524386.689:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1263 comm="apparmor_parser"
type=1400 audit(1369524386.689:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1263 comm="apparmor_parser"
type=1400 audit(1369524386.693:12): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1260 comm="apparmor_parser"
type=1400 audit(1369524386.693:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1260 comm="apparmor_parser"
type=1400 audit(1369524386.693:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1260 comm="apparmor_parser"
type=1400 audit(1369524386.693:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1265 comm="apparmor_parser"
type=1400 audit(1369524386.693:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1261 comm="apparmor_parser"
type=1400 audit(1369524386.697:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1261 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ppdev: user-space parallel port driver
init: avahi-cups-reload main process (1318) terminated with status 1
r8169 0000:06:00.0 eth0: link down
r8169 0000:06:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:06:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
show_signal_msg: 18 callbacks suppressed
conky[2467]: segfault at 0 ip 00007f683c16fc51 sp 00007f6830cffbc8 error 4 in libc-2.17.so[7f683c0e6000+1be000]
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.