dmesg - amd
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.0.35-rt58-0.5-rt (geeko@buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP PREEMPT RT Mon Jul 23 12:14:34 UTC 2012 (01abdef)
Command line: root=/dev/disk/by-id/ata-ST3120022A_3JT3VE4Y-part2 resume=/dev/disk/by-id/ata-ST3120022A_3JT3VE4Y-part1 splash=silent crashkernel=128M-:64M vga=0x317
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000cc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ff70000 (usable)
BIOS-e820: 000000007ff70000 - 000000007ff7b000 (ACPI data)
BIOS-e820: 000000007ff7b000 - 000000007ff80000 (ACPI NVS)
BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
DMI: IBM IBM eServer 325 -[8835W11]-/MS-9145, BIOS IBM BIOS Version 1.33 -[M1E133AUS-1.33]- 09/24/04
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7ff70 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CBFFF write-protect
CC000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000f7550] f7550
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000096000] 96000 size 20480
init_memory_mapping: 0000000000000000-000000007ff70000
0000000000 - 007fe00000 page 2M
007fe00000 - 007ff70000 page 4k
kernel direct mapping tables up to 7ff70000 @ 1fffc000-20000000
RAMDISK: 378d0000 - 37ff0000
Reserving 64MB of memory at 816MB for crashkernel (System RAM: 2047MB)
ACPI: RSDP 00000000000f74d0 00024 (v02 PTLTD )
ACPI: XSDT 000000007ff78ce2 00044 (v01 PTLTD ? XSDT 06040000 LTP 00000000)
ACPI: FACP 000000007ff7ae0e 000F4 (v03 AMD HAMMER 06040000 PTEC 000F4240)
ACPI: DSDT 000000007ff78d26 02074 (v01 AMD-K8 AMDACPI 06040000 MSFT 0100000E)
ACPI: FACS 000000007ff7bfc0 00040
ACPI: HPET 000000007ff7af02 00038 (v01 AMD HAMMER 06040000 PTEC 00000000)
ACPI: APIC 000000007ff7af3a 00076 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: SPCR 000000007ff7afb0 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
Number of physical nodes 2
Node 0 MemBase 0000000000000000 Limit 0000000040000000
Node 1 MemBase 0000000040000000 Limit 000000007ff70000
Initmem setup node 0 0000000000000000-0000000040000000
NODE_DATA [000000003ffd9000 - 000000003fffffff]
Initmem setup node 1 0000000040000000-000000007ff70000
NODE_DATA [000000007ff49080 - 000000007ff7007f]
[ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003ee00000-ffff88003fbfffff] on node 0
[ffffea0000e00000-ffffea0001bfffff] PMD -> [ffff88007e600000-ffff88007f3fffff] on node 1
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009b
0: 0x00000100 -> 0x00040000
1: 0x00040000 -> 0x0007ff70
On node 0 totalpages: 262027
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3918 pages, LIFO batch:0
DMA32 zone: 3528 pages used for memmap
DMA32 zone: 254520 pages, LIFO batch:31
On node 1 totalpages: 262000
DMA32 zone: 3583 pages used for memmap
DMA32 zone: 258417 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfc000000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 17, address 0xfc000000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xfc001000] gsi_base[28])
IOAPIC[2]: apic_id 4, version 17, address 0xfc001000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x102282a0 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000cc000
PM: Registered nosave memory: 00000000000cc000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:2
PERCPU: Embedded 24 pages/cpu @ffff88003fc00000 s67456 r8192 d22656 u2097152
pcpu-alloc: s67456 r8192 d22656 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0 [1] 1
Built 2 zonelists in Node order, mobility grouping on. Total pages: 516855
Policy zone: DMA32
Kernel command line: processor.max_cstate=1 intel_idle.max_cstate=1 skew_tick=1 root=/dev/disk/by-id/ata-ST3120022A_3JT3VE4Y-part2 resume=/dev/disk/by-id/ata-ST3120022A_3JT3VE4Y-part1 splash=silent crashkernel=128M-:64M vga=0x317
bootsplash: silent mode.
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ ac48000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 1978188k/2096576k available (4477k kernel code, 468k absent, 117920k reserved, 7541k data, 1388k init)
Preemptible hierarchical RCU implementation.
NR_IRQS:16640 nr_irqs:512 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1993.908 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 3987.81 BogoMIPS (lpj=1993908)
pid_max: default: 32768 minimum: 301
kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 007ff80000
mce: CPU supports 5 MCE banks
ACPI: Core revision 20110413
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD Opteron(tm) Processor 246 stepping 08
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 1, Processors #1 Ok.
smpboot cpu 1: start_ip = 96000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (7975.10 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 7ff7b000 (20480 bytes)
print_constraints: dummy:
Time: 9:38:54 Date: 05/23/13
NET: Registered protocol family 16
node 0 link 1: io port [0, ffffff]
TOM: 0000000080000000 aka 2048M
node 0 link 1: mmio [fc000000, fe2fffff]
node 0 link 1: mmio [fec00000, fec0ffff]
node 0 link 1: mmio [a0000, bffff]
node 0 link 1: mmio [fed00000, fed0ffff]
bus: [00, ff] on node 0 link 1
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x80000000-0xfebfffff]
bus: 00 index 2 [mem 0xfec00000-0xfecfffff]
bus: 00 index 3 [mem 0x000a0000-0x000bffff]
bus: 00 index 4 [mem 0xfed00000-0xfcffffffff]
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0x7fff] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x8100-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000c7fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
pci 0000:00:06.0: [1022:7460] type 1 class 0x000604
pci 0000:00:07.0: [1022:7468] type 0 class 0x000601
pci 0000:00:07.1: [1022:7469] type 0 class 0x000101
pci 0000:00:07.1: reg 20: [io 0x1020-0x102f]
pci 0000:00:07.2: [1022:746a] type 0 class 0x000c05
pci 0000:00:07.2: reg 10: [io 0x1000-0x101f]
pci 0000:00:07.3: [1022:746b] type 0 class 0x000680
pci 0000:00:0a.0: [1022:7450] type 1 class 0x000604
pci 0000:00:0a.1: [1022:7451] type 0 class 0x000800
pci 0000:00:0a.1: reg 10: [mem 0xfc000000-0xfc000fff 64bit]
pci 0000:00:0b.0: [1022:7450] type 1 class 0x000604
pci 0000:00:0b.1: [1022:7451] type 0 class 0x000800
pci 0000:00:0b.1: reg 10: [mem 0xfc001000-0xfc001fff 64bit]
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
pci 0000:00:19.0: [1022:1100] type 0 class 0x000600
pci 0000:00:19.1: [1022:1101] type 0 class 0x000600
pci 0000:00:19.2: [1022:1102] type 0 class 0x000600
pci 0000:00:19.3: [1022:1103] type 0 class 0x000600
PCI: peer root bus 00 res updated from pci conf
pci 0000:01:00.0: [1022:7464] type 0 class 0x000c03
pci 0000:01:00.0: reg 10: [mem 0xfc100000-0xfc100fff]
pci 0000:01:00.1: [1022:7464] type 0 class 0x000c03
pci 0000:01:00.1: reg 10: [mem 0xfc101000-0xfc101fff]
pci 0000:01:05.0: [1002:4752] type 0 class 0x000300
pci 0000:01:05.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:05.0: reg 14: [io 0x2000-0x20ff]
pci 0000:01:05.0: reg 18: [mem 0xfc102000-0xfc102fff]
pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:06.0: PCI bridge to [bus 01-01]
pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:06.0: bridge window [mem 0xfc100000-0xfdffffff]
pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:01.0: [14e4:1648] type 0 class 0x000200
pci 0000:02:01.0: reg 10: [mem 0xfe010000-0xfe01ffff 64bit]
pci 0000:02:01.0: reg 18: [mem 0xfe000000-0xfe00ffff 64bit]
pci 0000:02:01.0: PME# supported from D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:01.1: [14e4:1648] type 0 class 0x000200
pci 0000:02:01.1: reg 10: [mem 0xfe030000-0xfe03ffff 64bit]
pci 0000:02:01.1: reg 18: [mem 0xfe020000-0xfe02ffff 64bit]
pci 0000:02:01.1: PME# supported from D3hot D3cold
pci 0000:02:01.1: PME# disabled
pci 0000:02:02.0: [1000:0030] type 0 class 0x000100
pci 0000:02:02.0: reg 10: [io 0x3000-0x30ff]
pci 0000:02:02.0: reg 14: [mem 0xfe050000-0xfe05ffff 64bit]
pci 0000:02:02.0: reg 1c: [mem 0xfe040000-0xfe04ffff 64bit]
pci 0000:02:02.0: reg 30: [mem 0x00000000-0x000fffff pref]
pci 0000:02:02.0: supports D1 D2
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:0a.0: bridge window [mem 0xfe000000-0xfe0fffff]
pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.TP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PB._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 11) *7
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 5 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11)
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009b800 - 000000000009ffff
reserve RAM buffer: 000000007ff70000 - 000000007fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x000e0000-0x000fffff]
pnp 00:00: [mem 0x00100000-0x7fffffff]
pnp 00:00: [mem 0xfec00000-0xfec00fff]
pnp 00:00: [mem 0xffc00000-0xfff7ffff]
pnp 00:00: [mem 0xfee00000-0xfee00fff]
pnp 00:00: [mem 0xfff80000-0xffffffff]
pnp 00:00: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:02:02.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:00: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:02:02.0 BAR 6 [mem 0x00000000-0x000fffff pref]
system 00:00: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xffc00000-0xfff7ffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xfff80000-0xffffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0d00-0x7fff window]
pnp 00:01: [io 0x8000-0x807f]
pnp 00:01: [io 0x8080-0x80ff]
pnp 00:01: [io 0x8100-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000c7fff window]
pnp 00:01: [mem 0x80000000-0xfebfffff window]
pnp 00:01: [mem 0x000d8000-0x000dbfff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0075]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x04d0-0x04d1]
pnp 00:06: [io 0x1100-0x117f]
pnp 00:06: [io 0x1180-0x11ff]
pnp 00:06: [io 0x0010-0x001f]
pnp 00:06: [io 0x0022-0x003f]
pnp 00:06: [io 0x0044-0x005f]
pnp 00:06: [io 0x0062-0x0063]
pnp 00:06: [io 0x0065-0x006f]
pnp 00:06: [io 0x0076-0x007f]
pnp 00:06: [io 0x0090-0x009f]
pnp 00:06: [io 0x00a2-0x00bf]
pnp 00:06: [io 0x00e0-0x00ef]
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [io 0x0300-0x0307]
pnp 00:06: [io 0x0421-0x042f]
pnp 00:06: [io 0x0ca2-0x0ca3]
pnp 00:06: [mem 0x000c0000-0x000c7fff]
pnp 00:06: disabling [mem 0x000c0000-0x000c7fff] because it overlaps 0000:02:02.0 BAR 6 [mem 0x00000000-0x000fffff pref]
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x1100-0x117f] has been reserved
system 00:06: [io 0x1180-0x11ff] has been reserved
system 00:06: [io 0x0300-0x0307] has been reserved
system 00:06: [io 0x0421-0x042f] has been reserved
system 00:06: [io 0x0ca2-0x0ca3] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x03f8-0x03ff]
pnp 00:07: [irq 4]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:06.0: BAR 15: assigned [mem 0x80000000-0x800fffff pref]
pci 0000:00:0a.0: BAR 15: assigned [mem 0x80100000-0x801fffff pref]
pci 0000:01:05.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
pci 0000:00:06.0: PCI bridge to [bus 01-01]
pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:06.0: bridge window [mem 0xfc100000-0xfdffffff]
pci 0000:00:06.0: bridge window [mem 0x80000000-0x800fffff pref]
pci 0000:02:02.0: BAR 6: assigned [mem 0x80100000-0x801fffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:0a.0: bridge window [mem 0xfe000000-0xfe0fffff]
pci 0000:00:0a.0: bridge window [mem 0x80100000-0x801fffff pref]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0: bridge window [io disabled]
pci 0000:00:0b.0: bridge window [mem disabled]
pci 0000:00:0b.0: bridge window [mem pref disabled]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x80000000-0xfebfffff]
pci_bus 0000:00: resource 6 [mem 0xfec00000-0xfecfffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0xfed00000-0xfcffffffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xfc100000-0xfdffffff]
pci_bus 0000:01: resource 2 [mem 0x80000000-0x800fffff pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xfe000000-0xfe0fffff]
pci_bus 0000:02: resource 2 [mem 0x80100000-0x801fffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 1024 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:07.3: boot interrupts on device [1022:746b] already disabled
pci 0000:00:0a.0: MSI quirk detected; subordinate MSI disabled
pci 0000:00:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0000:00:0b.0: MSI quirk detected; subordinate MSI disabled
pci 0000:00:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0000:01:00.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:01:00.0: PCI INT D disabled
pci 0000:01:00.1: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:01:00.1: PCI INT D disabled
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 7296k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1369301934.888:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 969
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xfd000000, mapped to 0xffffc90000b80000, using 3072k, total 8128k
bootsplash 3.2.0-2010/03/31: looking for picture...
bootsplash: silentjpeg size 59221 bytes
bootsplash: ...found (1024x768, 31358 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Fixed MDIO Bus: probed
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
Registering the dns_resolver key type
PM: Checking hibernation image partition /dev/disk/by-id/ata-ST3120022A_3JT3VE4Y-part1
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 13:256:627
/usr/src/packages/BUILD/kernel-rt-3.0.35.rt58/linux-3.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 1388k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1648k freed
Freeing unused kernel memory: 1036k freed
SCSI subsystem initialized
Fusion MPT base driver 4.28.00.00suse
Copyright (c) 1999-2010 LSI Corporation
Fusion MPT SPI Host driver 4.28.00.00suse
mptspi 0000:02:02.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
mptbase: ioc0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total memory = 1989556 kB
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 B2: Capabilities={Initiator}
scsi0 : ioc0: LSI53C1030 B2, FwRev=01032715h, Ports=1, MaxQ=222, IRQ=26
libata version 3.00 loaded.
pata_amd 0000:00:07.1: version 0.4.1
scsi1 : pata_amd
scsi2 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1020 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1028 irq 15
ata1.00: ATA-6: ST3120022A, 3.10, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
scsi 1:0:0:0: Direct-Access ATA ST3120022A 3.10 PQ: 0 ANSI: 5
ata2.00: ATAPI: CD-224E, 2.9B, max UDMA/33
ata2.00: configured for UDMA/33
scsi 2:0:0:0: CD-ROM TEAC CD-224E 2.9B PQ: 0 ANSI: 5
rdac: device handler registered
emc: device handler registered
hp_sw: device handler registered
alua: device handler registered
udev: starting version 147
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
ACPI: acpi_idle registered with cpuidle
ACPI: processor limited to max C-state 1
usbcore: registered new device driver usb
sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:01:00.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:01:00.0: OHCI Host Controller
ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:01:00.0: irq 19, io mem 0xfc100000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 3.0.35-rt58-0.5-rt ohci_hcd
usb usb1: SerialNumber: 0000:01:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:01:00.1: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:01:00.1: OHCI Host Controller
ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:01:00.1: irq 19, io mem 0xfc101000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.0.35-rt58-0.5-rt ohci_hcd
usb usb2: SerialNumber: 0000:01:00.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 1-2: new full-speed USB device number 2 using ohci_hcd
PM: Marking nosave pages: 000000000009b000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
PM: Starting manual resume from disk
PM: Hibernation image partition 8:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
usb 1-2: New USB device found, idVendor=0951, idProduct=1642
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: DT 101 G2
usb 1-2: Manufacturer: Kingston
usb 1-2: SerialNumber: 001CC0EC34F1FB809717239E
REISERFS (device sda2): found reiserfs format "3.6" with standard journal
REISERFS (device sda2): using ordered data mode
reiserfs: using flush barriers
REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda2): checking transaction log (sda2)
REISERFS (device sda2): Using r5 hash to sort names
usb 2-1: new low-speed USB device number 2 using ohci_hcd
usb 2-1: New USB device found, idVendor=1241, idProduct=1603
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Keyboard
usb 2-1: Manufacturer:
usb 2-2: new low-speed USB device number 3 using ohci_hcd
usb 2-2: New USB device found, idVendor=04ca, idProduct=0030
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB Mouse
usb 2-2: Manufacturer: Lite-On Technology Corp.
udev: starting version 147
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
sd 1:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:0:0: Attached scsi generic sg1 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp 0000:00:0a.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp 0000:00:0a.0: Cannot reserve MMIO region
shpchp 0000:00:0b.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp 0000:00:0b.0: Cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
AMD768 RNG detected
input: PC Speaker as /devices/platform/pcspkr/input/input2
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
Initializing USB Mass Storage driver...
scsi3 : usb-storage 1-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
tg3.c:v3.119 (May 18, 2011)
tg3 0000:02:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
tg3 0000:02:01.0: eth0: Tigon3 [partno(BCM95704A6) rev 2003] (PCIX:100MHz:64-bit) MAC address 00:0d:60:14:38:c0
tg3 0000:02:01.0: eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:02:01.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
tg3 0000:02:01.0: eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
Fusion MPT misc device (ioctl) driver 4.28.00.00suse
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
tg3 0000:02:01.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25
tg3 0000:02:01.1: eth1: Tigon3 [partno(BCM95704A6) rev 2003] (PCIX:100MHz:64-bit) MAC address 00:0d:60:14:38:c1
tg3 0000:02:01.1: eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:02:01.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:01.1: eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
input: USB Keyboard as /devices/pci0000:00/0000:00:06.0/0000:01:00.1/usb2/2-1/2-1:1.0/input/input3
generic-usb 0003:1241:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:01:00.1-1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:06.0/0000:01:00.1/usb2/2-1/2-1:1.1/input/input4
generic-usb 0003:1241:1603.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:01:00.1-1/input1
input: Lite-On Technology Corp. USB Mouse as /devices/pci0000:00/0000:00:06.0/0000:01:00.1/usb2/2-2/2-2:1.0/input/input5
generic-usb 0003:04CA:0030.0003: input,hidraw2: USB HID v1.10 Mouse [Lite-On Technology Corp. USB Mouse] on usb-0000:01:00.1-2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
scsi 3:0:0:0: Direct-Access Kingston DT 101 G2 1.00 PQ: 0 ANSI: 0 CCS
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] 15644912 512-byte logical blocks: (8.01 GB/7.45 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 < sdb5 >
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Attached SCSI removable disk
Adding 2095100k swap on /dev/sda1. Priority:-1 extents:1 across:2095100k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
loop: module loaded
fuse init (API version 7.16)
type=1400 audit(1369301956.940:2): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=1149 comm="apparmor_parser"
type=1400 audit(1369301956.979:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=1154 comm="apparmor_parser"
type=1400 audit(1369301957.055:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=1158 comm="apparmor_parser"
type=1400 audit(1369301957.159:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=1162 comm="apparmor_parser"
type=1400 audit(1369301957.201:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-explicit-grant-helper" pid=1167 comm="apparmor_parser"
type=1400 audit(1369301957.245:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-grant-helper" pid=1171 comm="apparmor_parser"
type=1400 audit(1369301957.322:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-grant-helper-pam" pid=1175 comm="apparmor_parser"
type=1400 audit(1369301957.365:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-read-auth-helper" pid=1179 comm="apparmor_parser"
type=1400 audit(1369301957.396:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-resolve-exe-helper" pid=1183 comm="apparmor_parser"
type=1400 audit(1369301957.439:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-revoke-helper" pid=1187 comm="apparmor_parser"
powernow-k8: Power state transitions not supported
powernow-k8: Power state transitions not supported
audit_printk_skb: 24 callbacks suppressed
type=1400 audit(1369301966.392:20): apparmor="DENIED" operation="capable" parent=1 profile="/sbin/klogd" pid=1472 comm="klogd" capability=34 capname="syslog"
tg3 0000:02:01.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:02:01.0: eth0: Flow control is on for TX and on for RX
NET: Registered protocol family 17
auditd (3245): /proc/3245/oom_adj is deprecated, please use /proc/3245/oom_score_adj instead.
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
bootsplash: status on console 0 changed to on
Uniform Multi-Platform E-IDE driver
ide-cd driver 5.00
st: Version 20101219, fixed bufsize 32768, s/g segs 256
ppdev: user-space parallel port driver
lp: driver loaded but no devices found
lp: driver loaded but no devices found
lp: driver loaded but no devices found
tg3 0000:02:01.0: eth0: Link is down