Xorg.0.log - test
X.Org X Server 1.14.1
Release Date: 2013-04-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.8.7-1-ARCH x86_64
Current Operating System: Linux ux32vd 3.9.2-1-custom #1 SMP PREEMPT Mon May 13 17:22:30 CEST 2013 x86_64
Build Date: 17 April 2013 02:37:06PM
Current version of pixman: 0.30.0
Before reporting problems, check
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri May 17 12:31:18 2013
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor ""
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(WW) The directory "/usr/share/fonts/OTF/" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7fcc20
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 14.1
X.Org XInput driver : 19.1
X.Org Server Extension : 7.0
(II) config/udev: Adding drm device (/dev/dri/card0)
(--) PCI:*(0:0:2:0) 8086:0166:1043:1507 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
(--) PCI: (0:1:0:0) 10de:1140:1043:1507 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.14.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 7.0
(==) AIGLX enabled
Loading extension GLX
(==) Matched intel as autoconfigured driver 0
(==) Matched intel as autoconfigured driver 1
(==) Matched vesa as autoconfigured driver 2
(==) Matched modesetting as autoconfigured driver 3
(==) Matched fbdev as autoconfigured driver 4
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.14.0, module version = 2.21.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 14.1
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(II) Unloading vesa
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "modesetting"
(WW) Warning, couldn't open module modesetting
(II) UnloadModule: "modesetting"
(II) Unloading modesetting
(EE) Failed to load module "modesetting" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(II) Unloading fbdev
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
(++) using VT number 7
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
(**) intel(0): Relaxed fencing enabled
(**) intel(0): Wait on SwapBuffers? enabled
(**) intel(0): Triple buffering? enabled
(**) intel(0): Framebuffer tiled
(**) intel(0): Pixmaps tiled
(**) intel(0): 3D buffers tiled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output eDP1 has no monitor section
(--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): EDID for output eDP1
(II) intel(0): Manufacturer: CMN Model: 1343 Serial#: 0
(II) intel(0): Year: 2011 Week: 52
(II) intel(0): EDID Version: 1.4
(II) intel(0): Digital Display Input
(II) intel(0): 8 bits per channel
(II) intel(0): Digital interface is DisplayPort
(II) intel(0): Max Image Size [cm]: horiz.: 28 vert.: 16
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): Preferred mode is native pixel format and refresh rate
(II) intel(0): redX: 0.662 redY: 0.325 greenX: 0.297 greenY: 0.589
(II) intel(0): blueX: 0.146 blueY: 0.068 whiteX: 0.312 whiteY: 0.325
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 138.8 MHz Image Size: 282 x 165 mm
(II) intel(0): h_active: 1920 h_sync: 1966 h_sync_end 1996 h_blank_end 2080 h_border: 0
(II) intel(0): v_active: 1080 v_sync: 1082 v_sync_end 1086 v_blanking: 1112 v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 92.5 MHz Image Size: 282 x 165 mm
(II) intel(0): h_active: 1920 h_sync: 1966 h_sync_end 1996 h_blank_end 2080 h_border: 0
(II) intel(0): v_active: 1080 v_sync: 1082 v_sync_end 1086 v_blanking: 1112 v_border: 0
(II) intel(0): CMN
(II) intel(0): N133HSE-EA1
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff000dae431300000000
(II) intel(0): 34150104a51c10780293ada9534c9625
(II) intel(0): 114f5300000001010101010101010101
(II) intel(0): 010101010101363680a0703820402e1e
(II) intel(0): 24001aa510000018242480a070382040
(II) intel(0): 2e1e24001aa510000018000000fe0043
(II) intel(0): 4d4e0a202020202020202020000000fe
(II) intel(0): 004e3133334853452d4541310a2000cd
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output eDP1
(II) intel(0): Modeline "1920x1080"x60.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
(II) intel(0): Modeline "1920x1080"x40.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
(II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output HDMI1
(II) intel(0): EDID for output DP1
(II) intel(0): Output eDP1 connected
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output HDMI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output eDP1 using initial mode 1920x1080
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.14.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "dri2"
(II) LoadModule: "dri2"
(II) Module "dri2" already built-in
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(II) intel(0): [DRI2] DRI driver: i965
(II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(II) get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder enabled
(II) intel(0): Set up textured video
(II) intel(0): [XvMC] xvmc_vld driver initialized.
(II) intel(0): direct rendering: DRI2 Enabled
(==) intel(0): hotplug detection: "enabled"
(--) RandR disabled
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_INTEL_swap_event
(II) AIGLX: enabled GLX_ARB_create_context
(II) AIGLX: enabled GLX_ARB_create_context_profile
(II) AIGLX: enabled GLX_EXT_create_context_es2_profile
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized i965
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 508 x 285
(II) config/udev: Adding input device Video Bus (/dev/input/event9)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.14.0, module version = 2.8.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 19.1
(II) Using input driver 'evdev' for 'Video Bus'
(**) Video Bus: always reports core events
(**) evdev: Video Bus: Device: "/dev/input/event9"
(--) evdev: Video Bus: Vendor 0 Product 0x6
(--) evdev: Video Bus: Found keys
(II) evdev: Video Bus: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10/event9"
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Video Bus (/dev/input/event8)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Video Bus'
(**) Video Bus: always reports core events
(**) evdev: Video Bus: Device: "/dev/input/event8"
(--) evdev: Video Bus: Vendor 0 Product 0x6
(--) evdev: Video Bus: Found keys
(II) evdev: Video Bus: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input9/event8"
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event2"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Lid Switch (/dev/input/event1)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Sleep Button (/dev/input/event3)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Sleep Button'
(**) Sleep Button: always reports core events
(**) evdev: Sleep Button: Device: "/dev/input/event3"
(--) evdev: Sleep Button: Vendor 0 Product 0x3
(--) evdev: Sleep Button: Found keys
(II) evdev: Sleep Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event4)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event6)
(**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
(**) USB2.0 HD UVC WebCam: always reports core events
(**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event6"
(--) evdev: USB2.0 HD UVC WebCam: Vendor 0x4f2 Product 0xb330
(--) evdev: USB2.0 HD UVC WebCam: Found keys
(II) evdev: USB2.0 HD UVC WebCam: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input7/event6"
(II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 10)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
(**) AT Translated Set 2 keyboard: always reports core events
(**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
(--) evdev: AT Translated Set 2 keyboard: Found keys
(II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
(**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.14.0, module version = 1.7.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 19.1
(II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
(**) ETPS/2 Elantech Touchpad: always reports core events
(**) Option "Device" "/dev/input/event7"
(II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
(--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
(--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
(--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
(--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
(--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
(--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(**) ETPS/2 Elantech Touchpad: always reports core events
(**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event7"
(II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
(**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
(**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
(**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
(II) config/udev: removing device USB2.0 HD UVC WebCam
(II) evdev: USB2.0 HD UVC WebCam: Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event6)
(**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
(**) USB2.0 HD UVC WebCam: always reports core events
(**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event6"
(--) evdev: USB2.0 HD UVC WebCam: Vendor 0x4f2 Product 0xb330
(--) evdev: USB2.0 HD UVC WebCam: Found keys
(II) evdev: USB2.0 HD UVC WebCam: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input7/event6"
(II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 10)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/udev: removing device ETPS/2 Elantech Touchpad
(II) UnloadModule: "synaptics"
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
(**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
(II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
(**) ETPS/2 Elantech Touchpad: always reports core events
(**) Option "Device" "/dev/input/event7"
(II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
(--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
(--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
(--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
(--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
(--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
(--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(**) ETPS/2 Elantech Touchpad: always reports core events
(**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event7"
(II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
(**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
(**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
(**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
(II) config/udev: removing device Video Bus
(II) evdev: Video Bus: Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device Video Bus (/dev/input/event8)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Video Bus'
(**) Video Bus: always reports core events
(**) evdev: Video Bus: Device: "/dev/input/event8"
(--) evdev: Video Bus: Vendor 0 Product 0x6
(--) evdev: Video Bus: Found keys
(II) evdev: Video Bus: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input9/event8"
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/udev: removing device Video Bus
(II) evdev: Video Bus: Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device Video Bus (/dev/input/event9)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Video Bus'
(**) Video Bus: always reports core events
(**) evdev: Video Bus: Device: "/dev/input/event9"
(--) evdev: Video Bus: Vendor 0 Product 0x6
(--) evdev: Video Bus: Found keys
(II) evdev: Video Bus: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10/event9"
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 /dev/dri/card0
xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
failed to find screen to remove
(II) config/udev: Adding drm device (/dev/dri/card0)
removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1 (null)
removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1 (null)
removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-1 (null)
removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-1 (null)
(II) intel(0): EDID vendor "CMN", prod id 4931
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
(II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "CMN", prod id 4931
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
(II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "CMN", prod id 4931
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
(II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "CMN", prod id 4931
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
(II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "CMN", prod id 4931
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
(II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(EE) BUG: triggered 'if (priv->num_active_touches == 0)'
(EE) BUG: synaptics.c:2629 in UpdateTouchState()
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x3d) [0x57f48d]
(EE) 1: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f5b76ab0000+0x2cb4) [0x7f5b76ab2cb4]
(EE) 2: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f5b76ab0000+0x4b80) [0x7f5b76ab4b80]
(EE) 3: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f5b76ab0000+0x6772) [0x7f5b76ab6772]
(EE) 4: /usr/bin/X (0x400000+0x73a58) [0x473a58]
(EE) 5: /usr/bin/X (0x400000+0x9bdb0) [0x49bdb0]
(EE) 6: /usr/lib/libpthread.so.0 (0x7f5b7b11e000+0xf0e0) [0x7f5b7b12d0e0]
(EE) 7: /usr/lib/libc.so.6 (__select+0x13) [0x7f5b7a056cf3]
(EE) 8: /usr/bin/X (WaitForSomething+0x19c) [0x57ca4c]
(EE) 9: /usr/bin/X (0x400000+0x36f71) [0x436f71]
(EE) 10: /usr/bin/X (0x400000+0x26895) [0x426895]
(EE) 11: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f5b79f99a15]
(EE) 12: /usr/bin/X (0x400000+0x26bdd) [0x426bdd]
(EE)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "CMN", prod id 4931
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
(II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "CMN", prod id 4931
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
(II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "CMN", prod id 4931
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
(II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "CMN", prod id 4931
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
(II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "CMN", prod id 4931
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
(II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "CMN", prod id 4931
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
(II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) config/udev: Adding input device Bluetooth Wireless Laser Mouse (/dev/input/event10)
(**) Bluetooth Wireless Laser Mouse: Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'Bluetooth Wireless Laser Mouse'
(**) Bluetooth Wireless Laser Mouse: always reports core events
(**) evdev: Bluetooth Wireless Laser Mouse: Device: "/dev/input/event10"
(--) evdev: Bluetooth Wireless Laser Mouse: Vendor 0xa5c Product 0x1
(--) evdev: Bluetooth Wireless Laser Mouse: Found 9 mouse buttons
(--) evdev: Bluetooth Wireless Laser Mouse: Found scroll wheel(s)
(--) evdev: Bluetooth Wireless Laser Mouse: Found relative axes
(--) evdev: Bluetooth Wireless Laser Mouse: Found x and y relative axes
(--) evdev: Bluetooth Wireless Laser Mouse: Found absolute axes
(II) evdev: Bluetooth Wireless Laser Mouse: Forcing absolute x/y axes to exist.
(II) evdev: Bluetooth Wireless Laser Mouse: Configuring as mouse
(II) evdev: Bluetooth Wireless Laser Mouse: Adding scrollwheel support
(**) evdev: Bluetooth Wireless Laser Mouse: YAxisMapping: buttons 4 and 5
(**) evdev: Bluetooth Wireless Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/bluetooth/hci0/hci0:36/input11/event10"
(II) XINPUT: Adding extended input device "Bluetooth Wireless Laser Mouse" (type: MOUSE, id 13)
(II) evdev: Bluetooth Wireless Laser Mouse: initialized for relative axes.
(WW) evdev: Bluetooth Wireless Laser Mouse: ignoring absolute axes.
(**) Bluetooth Wireless Laser Mouse: (accel) keeping acceleration scheme 1
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration profile 0
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration factor: 2.000
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration threshold: 4
(II) config/udev: Adding input device Bluetooth Wireless Laser Mouse (/dev/input/mouse1)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: removing device Bluetooth Wireless Laser Mouse
(II) evdev: Bluetooth Wireless Laser Mouse: Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device Bluetooth Wireless Laser Mouse (/dev/input/mouse1)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Bluetooth Wireless Laser Mouse (/dev/input/event10)
(**) Bluetooth Wireless Laser Mouse: Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'Bluetooth Wireless Laser Mouse'
(**) Bluetooth Wireless Laser Mouse: always reports core events
(**) evdev: Bluetooth Wireless Laser Mouse: Device: "/dev/input/event10"
(--) evdev: Bluetooth Wireless Laser Mouse: Vendor 0xa5c Product 0x1
(--) evdev: Bluetooth Wireless Laser Mouse: Found 9 mouse buttons
(--) evdev: Bluetooth Wireless Laser Mouse: Found scroll wheel(s)
(--) evdev: Bluetooth Wireless Laser Mouse: Found relative axes
(--) evdev: Bluetooth Wireless Laser Mouse: Found x and y relative axes
(--) evdev: Bluetooth Wireless Laser Mouse: Found absolute axes
(II) evdev: Bluetooth Wireless Laser Mouse: Forcing absolute x/y axes to exist.
(II) evdev: Bluetooth Wireless Laser Mouse: Configuring as mouse
(II) evdev: Bluetooth Wireless Laser Mouse: Adding scrollwheel support
(**) evdev: Bluetooth Wireless Laser Mouse: YAxisMapping: buttons 4 and 5
(**) evdev: Bluetooth Wireless Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/bluetooth/hci0/hci0:35/input12/event10"
(II) XINPUT: Adding extended input device "Bluetooth Wireless Laser Mouse" (type: MOUSE, id 13)
(II) evdev: Bluetooth Wireless Laser Mouse: initialized for relative axes.
(WW) evdev: Bluetooth Wireless Laser Mouse: ignoring absolute axes.
(**) Bluetooth Wireless Laser Mouse: (accel) keeping acceleration scheme 1
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration profile 0
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration factor: 2.000
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration threshold: 4
(II) config/udev: removing device Bluetooth Wireless Laser Mouse
(II) evdev: Bluetooth Wireless Laser Mouse: Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device Bluetooth Wireless Laser Mouse (/dev/input/mouse1)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Bluetooth Wireless Laser Mouse (/dev/input/event10)
(**) Bluetooth Wireless Laser Mouse: Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'Bluetooth Wireless Laser Mouse'
(**) Bluetooth Wireless Laser Mouse: always reports core events
(**) evdev: Bluetooth Wireless Laser Mouse: Device: "/dev/input/event10"
(--) evdev: Bluetooth Wireless Laser Mouse: Vendor 0xa5c Product 0x1
(--) evdev: Bluetooth Wireless Laser Mouse: Found 9 mouse buttons
(--) evdev: Bluetooth Wireless Laser Mouse: Found scroll wheel(s)
(--) evdev: Bluetooth Wireless Laser Mouse: Found relative axes
(--) evdev: Bluetooth Wireless Laser Mouse: Found x and y relative axes
(--) evdev: Bluetooth Wireless Laser Mouse: Found absolute axes
(II) evdev: Bluetooth Wireless Laser Mouse: Forcing absolute x/y axes to exist.
(II) evdev: Bluetooth Wireless Laser Mouse: Configuring as mouse
(II) evdev: Bluetooth Wireless Laser Mouse: Adding scrollwheel support
(**) evdev: Bluetooth Wireless Laser Mouse: YAxisMapping: buttons 4 and 5
(**) evdev: Bluetooth Wireless Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/bluetooth/hci0/hci0:35/input13/event10"
(II) XINPUT: Adding extended input device "Bluetooth Wireless Laser Mouse" (type: MOUSE, id 13)
(II) evdev: Bluetooth Wireless Laser Mouse: initialized for relative axes.
(WW) evdev: Bluetooth Wireless Laser Mouse: ignoring absolute axes.
(**) Bluetooth Wireless Laser Mouse: (accel) keeping acceleration scheme 1
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration profile 0
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration factor: 2.000
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration threshold: 4
(II) config/udev: removing device Bluetooth Wireless Laser Mouse
(II) evdev: Bluetooth Wireless Laser Mouse: Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device Bluetooth Wireless Laser Mouse (/dev/input/mouse1)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Bluetooth Wireless Laser Mouse (/dev/input/event10)
(**) Bluetooth Wireless Laser Mouse: Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'Bluetooth Wireless Laser Mouse'
(**) Bluetooth Wireless Laser Mouse: always reports core events
(**) evdev: Bluetooth Wireless Laser Mouse: Device: "/dev/input/event10"
(--) evdev: Bluetooth Wireless Laser Mouse: Vendor 0xa5c Product 0x1
(--) evdev: Bluetooth Wireless Laser Mouse: Found 9 mouse buttons
(--) evdev: Bluetooth Wireless Laser Mouse: Found scroll wheel(s)
(--) evdev: Bluetooth Wireless Laser Mouse: Found relative axes
(--) evdev: Bluetooth Wireless Laser Mouse: Found x and y relative axes
(--) evdev: Bluetooth Wireless Laser Mouse: Found absolute axes
(II) evdev: Bluetooth Wireless Laser Mouse: Forcing absolute x/y axes to exist.
(II) evdev: Bluetooth Wireless Laser Mouse: Configuring as mouse
(II) evdev: Bluetooth Wireless Laser Mouse: Adding scrollwheel support
(**) evdev: Bluetooth Wireless Laser Mouse: YAxisMapping: buttons 4 and 5
(**) evdev: Bluetooth Wireless Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/bluetooth/hci0/hci0:35/input14/event10"
(II) XINPUT: Adding extended input device "Bluetooth Wireless Laser Mouse" (type: MOUSE, id 13)
(II) evdev: Bluetooth Wireless Laser Mouse: initialized for relative axes.
(WW) evdev: Bluetooth Wireless Laser Mouse: ignoring absolute axes.
(**) Bluetooth Wireless Laser Mouse: (accel) keeping acceleration scheme 1
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration profile 0
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration factor: 2.000
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration threshold: 4
(II) config/udev: removing device Bluetooth Wireless Laser Mouse
(II) evdev: Bluetooth Wireless Laser Mouse: Close
(II) UnloadModule: "evdev"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "CMN", prod id 4931
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
(II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) config/udev: Adding input device Bluetooth Wireless Laser Mouse (/dev/input/mouse1)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Bluetooth Wireless Laser Mouse (/dev/input/event10)
(**) Bluetooth Wireless Laser Mouse: Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'Bluetooth Wireless Laser Mouse'
(**) Bluetooth Wireless Laser Mouse: always reports core events
(**) evdev: Bluetooth Wireless Laser Mouse: Device: "/dev/input/event10"
(--) evdev: Bluetooth Wireless Laser Mouse: Vendor 0xa5c Product 0x1
(--) evdev: Bluetooth Wireless Laser Mouse: Found 9 mouse buttons
(--) evdev: Bluetooth Wireless Laser Mouse: Found scroll wheel(s)
(--) evdev: Bluetooth Wireless Laser Mouse: Found relative axes
(--) evdev: Bluetooth Wireless Laser Mouse: Found x and y relative axes
(--) evdev: Bluetooth Wireless Laser Mouse: Found absolute axes
(II) evdev: Bluetooth Wireless Laser Mouse: Forcing absolute x/y axes to exist.
(II) evdev: Bluetooth Wireless Laser Mouse: Configuring as mouse
(II) evdev: Bluetooth Wireless Laser Mouse: Adding scrollwheel support
(**) evdev: Bluetooth Wireless Laser Mouse: YAxisMapping: buttons 4 and 5
(**) evdev: Bluetooth Wireless Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/bluetooth/hci0/hci0:35/input15/event10"
(II) XINPUT: Adding extended input device "Bluetooth Wireless Laser Mouse" (type: MOUSE, id 13)
(II) evdev: Bluetooth Wireless Laser Mouse: initialized for relative axes.
(WW) evdev: Bluetooth Wireless Laser Mouse: ignoring absolute axes.
(**) Bluetooth Wireless Laser Mouse: (accel) keeping acceleration scheme 1
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration profile 0
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration factor: 2.000
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration threshold: 4
(II) config/udev: removing device Bluetooth Wireless Laser Mouse
(II) evdev: Bluetooth Wireless Laser Mouse: Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device Bluetooth Wireless Laser Mouse (/dev/input/mouse1)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Bluetooth Wireless Laser Mouse (/dev/input/event10)
(**) Bluetooth Wireless Laser Mouse: Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'Bluetooth Wireless Laser Mouse'
(**) Bluetooth Wireless Laser Mouse: always reports core events
(**) evdev: Bluetooth Wireless Laser Mouse: Device: "/dev/input/event10"
(--) evdev: Bluetooth Wireless Laser Mouse: Vendor 0xa5c Product 0x1
(--) evdev: Bluetooth Wireless Laser Mouse: Found 9 mouse buttons
(--) evdev: Bluetooth Wireless Laser Mouse: Found scroll wheel(s)
(--) evdev: Bluetooth Wireless Laser Mouse: Found relative axes
(--) evdev: Bluetooth Wireless Laser Mouse: Found x and y relative axes
(--) evdev: Bluetooth Wireless Laser Mouse: Found absolute axes
(II) evdev: Bluetooth Wireless Laser Mouse: Forcing absolute x/y axes to exist.
(II) evdev: Bluetooth Wireless Laser Mouse: Configuring as mouse
(II) evdev: Bluetooth Wireless Laser Mouse: Adding scrollwheel support
(**) evdev: Bluetooth Wireless Laser Mouse: YAxisMapping: buttons 4 and 5
(**) evdev: Bluetooth Wireless Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/bluetooth/hci0/hci0:35/input16/event10"
(II) XINPUT: Adding extended input device "Bluetooth Wireless Laser Mouse" (type: MOUSE, id 13)
(II) evdev: Bluetooth Wireless Laser Mouse: initialized for relative axes.
(WW) evdev: Bluetooth Wireless Laser Mouse: ignoring absolute axes.
(**) Bluetooth Wireless Laser Mouse: (accel) keeping acceleration scheme 1
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration profile 0
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration factor: 2.000
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration threshold: 4
(II) config/udev: removing device Bluetooth Wireless Laser Mouse
(II) evdev: Bluetooth Wireless Laser Mouse: Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device Bluetooth Wireless Laser Mouse (/dev/input/mouse1)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Bluetooth Wireless Laser Mouse (/dev/input/event10)
(**) Bluetooth Wireless Laser Mouse: Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'Bluetooth Wireless Laser Mouse'
(**) Bluetooth Wireless Laser Mouse: always reports core events
(**) evdev: Bluetooth Wireless Laser Mouse: Device: "/dev/input/event10"
(--) evdev: Bluetooth Wireless Laser Mouse: Vendor 0xa5c Product 0x1
(--) evdev: Bluetooth Wireless Laser Mouse: Found 9 mouse buttons
(--) evdev: Bluetooth Wireless Laser Mouse: Found scroll wheel(s)
(--) evdev: Bluetooth Wireless Laser Mouse: Found relative axes
(--) evdev: Bluetooth Wireless Laser Mouse: Found x and y relative axes
(--) evdev: Bluetooth Wireless Laser Mouse: Found absolute axes
(II) evdev: Bluetooth Wireless Laser Mouse: Forcing absolute x/y axes to exist.
(II) evdev: Bluetooth Wireless Laser Mouse: Configuring as mouse
(II) evdev: Bluetooth Wireless Laser Mouse: Adding scrollwheel support
(**) evdev: Bluetooth Wireless Laser Mouse: YAxisMapping: buttons 4 and 5
(**) evdev: Bluetooth Wireless Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/bluetooth/hci0/hci0:38/input17/event10"
(II) XINPUT: Adding extended input device "Bluetooth Wireless Laser Mouse" (type: MOUSE, id 13)
(II) evdev: Bluetooth Wireless Laser Mouse: initialized for relative axes.
(WW) evdev: Bluetooth Wireless Laser Mouse: ignoring absolute axes.
(**) Bluetooth Wireless Laser Mouse: (accel) keeping acceleration scheme 1
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration profile 0
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration factor: 2.000
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration threshold: 4
(II) config/udev: removing device Bluetooth Wireless Laser Mouse
(II) evdev: Bluetooth Wireless Laser Mouse: Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device Bluetooth Wireless Laser Mouse (/dev/input/mouse1)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Bluetooth Wireless Laser Mouse (/dev/input/event10)
(**) Bluetooth Wireless Laser Mouse: Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'Bluetooth Wireless Laser Mouse'
(**) Bluetooth Wireless Laser Mouse: always reports core events
(**) evdev: Bluetooth Wireless Laser Mouse: Device: "/dev/input/event10"
(--) evdev: Bluetooth Wireless Laser Mouse: Vendor 0xa5c Product 0x1
(--) evdev: Bluetooth Wireless Laser Mouse: Found 9 mouse buttons
(--) evdev: Bluetooth Wireless Laser Mouse: Found scroll wheel(s)
(--) evdev: Bluetooth Wireless Laser Mouse: Found relative axes
(--) evdev: Bluetooth Wireless Laser Mouse: Found x and y relative axes
(--) evdev: Bluetooth Wireless Laser Mouse: Found absolute axes
(II) evdev: Bluetooth Wireless Laser Mouse: Forcing absolute x/y axes to exist.
(II) evdev: Bluetooth Wireless Laser Mouse: Configuring as mouse
(II) evdev: Bluetooth Wireless Laser Mouse: Adding scrollwheel support
(**) evdev: Bluetooth Wireless Laser Mouse: YAxisMapping: buttons 4 and 5
(**) evdev: Bluetooth Wireless Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/bluetooth/hci0/hci0:35/input18/event10"
(II) XINPUT: Adding extended input device "Bluetooth Wireless Laser Mouse" (type: MOUSE, id 13)
(II) evdev: Bluetooth Wireless Laser Mouse: initialized for relative axes.
(WW) evdev: Bluetooth Wireless Laser Mouse: ignoring absolute axes.
(**) Bluetooth Wireless Laser Mouse: (accel) keeping acceleration scheme 1
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration profile 0
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration factor: 2.000
(**) Bluetooth Wireless Laser Mouse: (accel) acceleration threshold: 4
(II) config/udev: removing device Bluetooth Wireless Laser Mouse
(II) evdev: Bluetooth Wireless Laser Mouse: Close
(II) UnloadModule: "evdev"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "CMN", prod id 4931
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
(II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "CMN", prod id 4931
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
(II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) intel(0): EDID vendor "CMN", prod id 4931
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
(II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)