dmesg - graphicssuite14
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-19-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #30-Ubuntu SMP Wed May 1 16:35:23 UTC 2013 (Ubuntu 3.8.0-19.30-generic 3.8.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000b935ffff] usable
BIOS-e820: [mem 0x00000000b9360000-0x00000000b9b60fff] reserved
BIOS-e820: [mem 0x00000000b9b61000-0x00000000b9bbbfff] usable
BIOS-e820: [mem 0x00000000b9bbc000-0x00000000bafbbfff] reserved
BIOS-e820: [mem 0x00000000bafbc000-0x00000000bf9befff] usable
BIOS-e820: [mem 0x00000000bf9bf000-0x00000000bfabefff] reserved
BIOS-e820: [mem 0x00000000bfabf000-0x00000000bfbbefff] ACPI NVS
BIOS-e820: [mem 0x00000000bfbbf000-0x00000000bfbfefff] ACPI data
BIOS-e820: [mem 0x00000000bfbff000-0x00000000bfbfffff] usable
BIOS-e820: [mem 0x00000000bfc00000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: AMD eKabini/Larne, BIOS QXi-300 BIOS 01 Eval. 5/10/2013
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00BFBA7000 mask FFFFFFF000 uncachable
3 base 00FFC00000 mask FFFFC00000 write-protect
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000011f000000 aka 4592M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbfc00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xbfbfffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0xbfbfffff] page 2M
kernel direct mapping tables up to 0xbfbfffff @ [mem 0x1fffe000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x11effffff]
[mem 0x100000000-0x11effffff] page 2M
kernel direct mapping tables up to 0x11effffff @ [mem 0xbf9bd000-0xbf9befff]
RAMDISK: [mem 0x36120000-0x37087fff]
ACPI: RSDP 00000000000fe020 00024 (v02 INSYDE)
ACPI: XSDT 00000000bfbfe120 000BC (v01 INSYDE IS CRB 00000001 01000013)
ACPI: FACP 00000000bfbfc000 0010C (v05 INSYDE IS CRB 00000001 ACPI 00040000)
ACPI: DSDT 00000000bfbf2000 0592A (v01 INSYDE IS CRB F0000000 ACPI 00040000)
ACPI: FACS 00000000bfb66000 00040
ACPI: UEFI 00000000bfbfd000 00236 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
ACPI: HPET 00000000bfbfb000 00038 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
ACPI: APIC 00000000bfbfa000 00090 (v03 INSYDE IS CRB 00000001 ACPI 00040000)
ACPI: MCFG 00000000bfbf9000 0003C (v01 INSYDE IS CRB 00000001 ACPI 00040000)
ACPI: ASF! 00000000bfbf8000 000A5 (v32 INSYDE IS CRB 00000001 ACPI 00040000)
ACPI: BOOT 00000000bfbf1000 00028 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
ACPI: SLIC 00000000bfbf0000 00176 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
ACPI: WDRT 00000000bfbef000 00047 (v01 INSYDE IS CRB 00000000 ACPI 00040000)
ACPI: WDAT 00000000bfbee000 001AC (v01 INSYDE IS CRB 00000001 ACPI 00040000)
ACPI: FPDT 00000000bfbec000 00044 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
ACPI: SSDT 00000000bfbea000 00CB4 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
ACPI: SSDT 00000000bfbe3000 06352 (v02 INSYDE IS CRB 00000002 ACPI 00040000)
ACPI: SSDT 00000000bfbe2000 009CE (v01 INSYDE IS CRB 00001000 ACPI 00040000)
ACPI: SSDT 00000000bfbe1000 00559 (v01 INSYDE IS CRB 00001000 ACPI 00040000)
ACPI: SSDT 00000000bfbdf000 013CA (v01 INSYDE IS CRB 00000001 ACPI 00040000)
ACPI: SSDT 00000000bfbde000 0008C (v01 INSYDE IS CRB 00000001 ACPI 00040000)
ACPI: SSDT 00000000bfbdd000 00D61 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
ACPI: SSDT 00000000bfbdb000 010BF (v01 INSYDE IS CRB 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011effffff]
Initmem setup node 0 [mem 0x00000000-0x11effffff]
NODE_DATA [mem 0x11effb000-0x11effffff]
[ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ae00000-ffff88011e5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x11effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0xb935ffff]
node 0: [mem 0xb9b61000-0xb9bbbfff]
node 0: [mem 0xbafbc000-0xbf9befff]
node 0: [mem 0xbfbff000-0xbfbfffff]
node 0: [mem 0x100000000-0x11effffff]
On node 0 totalpages: 904526
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 12087 pages used for memmap
DMA32 zone: 761480 pages, LIFO batch:31
Normal zone: 1984 pages used for memmap
Normal zone: 124992 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000b9360000 - 00000000b9b61000
PM: Registered nosave memory: 00000000b9bbc000 - 00000000bafbc000
PM: Registered nosave memory: 00000000bf9bf000 - 00000000bfabf000
PM: Registered nosave memory: 00000000bfabf000 - 00000000bfbbf000
PM: Registered nosave memory: 00000000bfbbf000 - 00000000bfbff000
PM: Registered nosave memory: 00000000bfc00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
PM: Registered nosave memory: 00000000fed81000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88011ec00000 s85056 r8192 d21440 u524288
pcpu-alloc: s85056 r8192 d21440 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 890385
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3462656k/4702208k available (7006k kernel code, 1084104k absent, 155448k reserved, 6238k data, 992k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
NR_IRQS:16640 nr_irqs:1024 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 14680064 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1996.430 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.86 BogoMIPS (lpj=7985720)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00bfc00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128
tlb_flushall_shift: 5
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26690 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Eng Sample: 2M201079J4461_00/20/08/06_9830 (fam: 16, model: 00, stepping: 01)
Performance Events:
------------[ cut here ]------------
WARNING: at /build/buildd/linux-3.8.0/arch/x86/kernel/cpu/perf_event_amd.c:620 amd_pmu_init+0x176/0x1ec()
Hardware name: eKabini
Odd, counter constraints enabled but no core perfctrs detected!
Modules linked in:
Pid: 1, comm: swapper/0 Not tainted 3.8.0-19-generic #30-Ubuntu
Call Trace:
[] ? amd_pmu_init+0x176/0x1ec
[] warn_slowpath_common+0x7f/0xc0
[] ? check_bugs+0x2d/0x2d
[] warn_slowpath_fmt+0x4c/0x50
[] amd_pmu_init+0x176/0x1ec
[] init_hw_perf_events+0x3f/0x42b
[] ? check_bugs+0x2d/0x2d
[] do_one_initcall+0x12a/0x180
[] kernel_init_freeable+0x9b/0x1c6
[] ? rest_init+0x80/0x80
[] kernel_init+0xe/0xf0
[] ret_from_fork+0x7c/0xb0
[] ? rest_init+0x80/0x80
---[ end trace f4ae28577914d9ee ]---
AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (15971.44 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbfabf000-0xbfbbefff] (1048576 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff])
pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
pci 0000:00:01.0: [1002:9830] type 00 class 0x030000
pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:01.0: reg 18: [mem 0xf2000000-0xf27fffff 64bit pref]
pci 0000:00:01.0: reg 20: [io 0x6000-0x60ff]
pci 0000:00:01.0: reg 24: [mem 0xf3000000-0xf303ffff]
pci 0000:00:01.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 10: [mem 0xf3040000-0xf3043fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
pci 0000:00:02.5: [1022:1439] type 01 class 0x060400
pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7800] type 00 class 0x01018f
pci 0000:00:11.0: reg 10: [io 0x6118-0x611f]
pci 0000:00:11.0: reg 14: [io 0x6124-0x6127]
pci 0000:00:11.0: reg 18: [io 0x6110-0x6117]
pci 0000:00:11.0: reg 1c: [io 0x6120-0x6123]
pci 0000:00:11.0: reg 20: [io 0x6100-0x610f]
pci 0000:00:11.0: reg 24: [mem 0xf304d000-0xf304d3ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xf304c000-0xf304cfff]
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xf304b000-0xf304b0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xf304a000-0xf304afff]
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xf3049000-0xf30490ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xf3044000-0xf3047fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
pci 0000:00:14.7: reg 10: [mem 0xf3048000-0xf30480ff 64bit]
pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 10: [io 0x5000-0x50ff]
pci 0000:01:00.0: reg 18: [mem 0xf1000000-0xf1000fff 64bit]
pci 0000:01:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.2: PCI bridge to [bus 01-04]
pci 0000:00:02.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:02.2: bridge window [mem 0xf1000000-0xf1ffffff]
pci 0000:00:02.2: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 10: [io 0x4000-0x40ff]
pci 0000:05:00.0: reg 18: [mem 0xf2f00000-0xf2f00fff 64bit]
pci 0000:05:00.0: reg 20: [mem 0xf2d00000-0xf2d03fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.3: PCI bridge to [bus 05]
pci 0000:00:02.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:02.3: bridge window [mem 0xf2f00000-0xf2ffffff]
pci 0000:00:02.3: bridge window [mem 0xf2d00000-0xf2dfffff 64bit pref]
pci 0000:06:00.0: [1b21:0611] type 00 class 0x010185
pci 0000:06:00.0: reg 10: [io 0x3018-0x301f]
pci 0000:06:00.0: reg 14: [io 0x3024-0x3027]
pci 0000:06:00.0: reg 18: [io 0x3010-0x3017]
pci 0000:06:00.0: reg 1c: [io 0x3020-0x3023]
pci 0000:06:00.0: reg 20: [io 0x3000-0x300f]
pci 0000:06:00.0: reg 24: [mem 0xf2e00000-0xf2e001ff]
pci 0000:06:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
pci 0000:00:02.4: PCI bridge to [bus 06]
pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:02.4: bridge window [mem 0xf2e00000-0xf2efffff]
pci 0000:07:00.0: [19d4:0010] type 00 class 0x101000
pci 0000:07:00.0: reg 10: [io 0x2200-0x22ff]
pci 0000:07:00.1: [19d4:0010] type 00 class 0x101000
pci 0000:07:00.1: reg 10: [mem 0xf2800000-0xf2bfffff pref]
pci 0000:07:00.1: reg 14: [io 0x2100-0x21ff]
pci 0000:07:00.2: [19d4:0010] type 00 class 0x101000
pci 0000:07:00.2: reg 10: [mem 0xf2c00000-0xf2c00fff pref]
pci 0000:07:00.2: reg 14: [io 0x2000-0x20ff]
pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.5: PCI bridge to [bus 07]
pci 0000:00:02.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.5: bridge window [mem 0xf2800000-0xf2cfffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP3._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
e820: reserve RAM buffer [mem 0xb9360000-0xbbffffff]
e820: reserve RAM buffer [mem 0xb9bbc000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbf9bf000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfc00000-0xbfffffff]
e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:06: [io 0x0400-0x04cf] has been reserved
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x04d6] has been reserved
system 00:06: [io 0x0680-0x06ff] has been reserved
system 00:06: [io 0x077a] has been reserved
system 00:06: [io 0x0c00-0x0c01] has been reserved
system 00:06: [io 0x0c14] has been reserved
system 00:06: [io 0x0c50-0x0c52] has been reserved
system 00:06: [io 0x0c6c] has been reserved
system 00:06: [io 0x0c6f] has been reserved
system 00:06: [io 0x0cd0-0x0cdb] has been reserved
system 00:06: [io 0x0840-0x0847] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0xffc00000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (disabled)
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (disabled)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (disabled)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (disabled)
pnp 00:0c: [irq 0 disabled]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0d: [irq 0 disabled]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: address space collision: [mem 0xfffe0000-0xffffffff pref] conflicts with reserved [mem 0xffc00000-0xffffffff]
pci 0000:06:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:00:02.4: BAR 15: assigned [mem 0xf3100000-0xf31fffff pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0xf3060000-0xf307ffff pref]
pci 0000:00:02.2: PCI bridge to [bus 01-04]
pci 0000:00:02.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:02.2: bridge window [mem 0xf1000000-0xf1ffffff]
pci 0000:00:02.2: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
pci 0000:00:02.3: PCI bridge to [bus 05]
pci 0000:00:02.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:02.3: bridge window [mem 0xf2f00000-0xf2ffffff]
pci 0000:00:02.3: bridge window [mem 0xf2d00000-0xf2dfffff 64bit pref]
pci 0000:06:00.0: BAR 6: assigned [mem 0xf3100000-0xf310ffff pref]
pci 0000:00:02.4: PCI bridge to [bus 06]
pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:02.4: bridge window [mem 0xf2e00000-0xf2efffff]
pci 0000:00:02.4: bridge window [mem 0xf3100000-0xf31fffff pref]
pci 0000:00:02.5: PCI bridge to [bus 07]
pci 0000:00:02.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.5: bridge window [mem 0xf2800000-0xf2cfffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0xf1000000-0xf1ffffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf0ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xf2f00000-0xf2ffffff]
pci_bus 0000:05: resource 2 [mem 0xf2d00000-0xf2dfffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:06: resource 1 [mem 0xf2e00000-0xf2efffff]
pci_bus 0000:06: resource 2 [mem 0xf3100000-0xf31fffff pref]
pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:07: resource 2 [mem 0xf2800000-0xf2cfffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15776k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb9bd000-0xbf9bd000] (64MB) mapped at [ffff8800bb9bd000-ffff8800bf9bcfff]
Simple Boot Flag at 0x44 set to 0x1
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1368612384.296:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 6793
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.2: irq 72 for MSI/MSI-X
pcieport 0000:00:02.3: irq 73 for MSI/MSI-X
pcieport 0000:00:02.4: irq 74 for MSI/MSI-X
pcieport 0000:00:02.5: irq 75 for MSI/MSI-X
pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.4: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.5: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.1: Signaling PME through PCIe PME interrupt
pci 0000:07:00.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.5:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
serial 00:08: [io 0x0338-0x033f]
serial 00:08: [irq 11]
serial 00:08: activated
00:08: ttyS4 at I/O 0x338 (irq = 11) is a 16550A
serial 00:09: [io 0x0238-0x023f]
serial 00:09: [irq 10]
serial 00:09: activated
00:09: ttyS5 at I/O 0x238 (irq = 10) is a 16550A
serial 00:0a: [io 0x0228-0x022f]
serial 00:0a: [io 0x0228-0x022f]
serial 00:0a: [io 0x0220-0x0227]
serial 00:0a: [io 0x0220-0x0227]
serial 00:0a: unable to assign resources
serial 00:0b: [io 0x0228-0x022f]
serial 00:0b: [io 0x0228-0x022f]
serial 00:0b: [io 0x0220-0x0227]
serial 00:0b: [io 0x0220-0x0227]
serial 00:0b: unable to assign resources
00:0c: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A
00:0d: ttyS1 at I/O 0x2f8 (irq = 0) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xf304b000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xf3049000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 18, io mem 0xf304c000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.0: irq 18, io mem 0xf304a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
tsc: Refined TSC clocksource calibration: 1996.255 MHz
Switching to clocksource tsc
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 4fb521df0b0fa81f775431361b8076d5d0f1869a'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:04: setting system clock to 2013-05-15 10:06:26 UTC (1368612386)
powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 992k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1176k freed
Freeing unused kernel memory: 1080k freed
udevd[108]: starting version 175
Disabling lock debugging due to kernel taint
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
scsi0 : ahci
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: irq 76 for MSI/MSI-X
r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000676000, 00:14:c6:01:bb:fa, XID 0c900800 IRQ 76
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi1 : ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m1024@0xf304d000 port 0xf304d180 irq 19
ahci 0000:06:00.0: irq 77 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:06:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
ahci 0000:06:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: irq 78 for MSI/MSI-X
r8169 0000:05:00.0 eth1: RTL8168evl/8111evl at 0xffffc9000067a000, 00:14:c6:01:bb:fb, XID 0c900800 IRQ 78
r8169 0000:05:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi2 : ahci
scsi3 : ahci
ata3: SATA max UDMA/133 abar m512@0xf2e00000 port 0xf2e00100 irq 77
ata4: SATA max UDMA/133 abar m512@0xf2e00000 port 0xf2e00180 irq 77
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
usb 1-3: new high-speed USB device number 2 using ehci-pci
mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
usb 1-3: New USB device found, idVendor=0951, idProduct=1653
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: DT 100 G2
usb 1-3: Manufacturer: Kingston
usb 1-3: SerialNumber: 0019E06B07AEBC80E72B0046
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: Hitachi HTS547550A9E384, JE3OA60A, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54755 JE3O PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
Initializing USB Mass Storage driver...
scsi4 : usb-storage 1-3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 3-4: new full-speed USB device number 2 using ohci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
usb 3-4: New USB device found, idVendor=045e, idProduct=0745
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4: Product: Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0
usb 3-4: Manufacturer: Microsoft
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.0/input/input2
hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:12.0-4/input0
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.1/input/input3
hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:12.0-4/input1
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.2/input/input4
hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:12.0-4/input2
scsi 4:0:0:0: Direct-Access Kingston DT 100 G2 PMAP PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 3616764k swap on /dev/sda5. Priority:-1 extents:1 across:3616764k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
udevd[376]: starting version 175
type=1400 audit(1368612394.858:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=513 comm="apparmor_parser"
type=1400 audit(1368612394.858:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=514 comm="apparmor_parser"
type=1400 audit(1368612394.858:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=515 comm="apparmor_parser"
type=1400 audit(1368612394.858:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=514 comm="apparmor_parser"
type=1400 audit(1368612394.858:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=515 comm="apparmor_parser"
type=1400 audit(1368612394.858:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=513 comm="apparmor_parser"
type=1400 audit(1368612394.862:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=514 comm="apparmor_parser"
type=1400 audit(1368612394.862:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=515 comm="apparmor_parser"
type=1400 audit(1368612394.862:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=513 comm="apparmor_parser"
microcode: CPU0: patch_level=0x07000106
lp: driver loaded but no devices found
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin
microcode: CPU1: patch_level=0x07000106
microcode: CPU2: patch_level=0x07000106
microcode: CPU3: patch_level=0x07000106
microcode: Microcode Update Driver: v2.00 , Peter Oruba
acpi device:00: registered as cooling_device4
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
kvm: disabled by bios
snd_hda_intel 0000:00:01.1: irq 79 for MSI/MSI-X
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
snd_hda_intel 0000:00:14.2: irq 80 for MSI/MSI-X
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 3248 MBytes.
[fglrx] vendor: 1002 device: 9830 count: 1
[fglrx] ioport: bar 4, base 0x6000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 12.10.5 [Apr 9 2013] with 1 minors
vesafb: mode is 1680x1050x32, linelength=6912, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005880000, using 7104k, total 7104k
Console: switching to colour frame buffer device 210x65
fb0: VESA VGA frame buffer device
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: failsafe main process (860) killed by TERM signal
ppdev: user-space parallel port driver
init: avahi-cups-reload main process (925) terminated with status 1
type=1400 audit(1368612397.098:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=963 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
r8169 0000:01:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:05:00.0 eth1: link down
r8169 0000:05:00.0 eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
fglrx_pci 0000:00:01.0: irq 81 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1249
[fglrx] Firegl kernel thread PID: 1250
[fglrx] Firegl kernel thread PID: 1251
[fglrx] IRQ 81 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc40000, size:3c0000
[fglrx] Reserved FB block: Unshared offset:1ffee000, size:12000
[fglrx] ATIF platform detected with notification ID: 0x81
r8169 0000:05:00.0 eth1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
init: upstart-file-bridge main process (326) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-udev-bridge main process (372) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (534) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-udev-bridge main process (21968) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (21972) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (21971) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-udev-bridge main process (24579) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (24582) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (24583) terminated with status 1
init: upstart-file-bridge main process ended, respawning
usb 1-3: USB disconnect, device number 2
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
usb 3-4: USB disconnect, device number 2
usb 3-4: new full-speed USB device number 3 using ohci_hcd
usb 3-4: New USB device found, idVendor=045e, idProduct=0745
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4: Product: Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0
usb 3-4: Manufacturer: Microsoft
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.0/input/input9
hid-generic 0003:045E:0745.0004: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:12.0-4/input0
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.1/input/input10
hid-generic 0003:045E:0745.0005: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:12.0-4/input1
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.2/input/input11
hid-generic 0003:045E:0745.0006: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:12.0-4/input2
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.