dmesg - 1
scsi 8:0:1:0: Direct-Access ATA Hitachi HTS72505 A3A0 PQ: 0 ANSI: 6
scsi 8:0:1:0: SATA: handle(0x000a), sas_addr(0x4433221103000000), phy(3), device_name(0x5000cca662c447f2)
scsi 8:0:1:0: SATA: enclosure_logical_id(0x500304800baf2d00), slot(3)
scsi 8:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 8:0:1:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
sd 8:0:1:0: Attached scsi generic sg2 type 0
sd 8:0:1:0: [sdb] physical block alignment offset: 4096
sd 8:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 8:0:1:0: [sdb] 4096-byte physical blocks
sd 8:0:0:0: [sda] Write Protect is off
sd 8:0:0:0: [sda] Mode Sense: 7f 00 00 08
scsi 8:0:2:0: Direct-Access ATA Hitachi HTS72505 A3A0 PQ: 0 ANSI: 6
scsi 8:0:2:0: SATA: handle(0x000b), sas_addr(0x4433221102000000), phy(2), device_name(0x5000cca662c41a7a)
scsi 8:0:2:0: SATA: enclosure_logical_id(0x500304800baf2d00), slot(2)
scsi 8:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 8:0:2:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:2:0: Attached scsi generic sg3 type 0
sd 8:0:2:0: [sdc] physical block alignment offset: 4096
sd 8:0:2:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 8:0:2:0: [sdc] 4096-byte physical blocks
sd 8:0:1:0: [sdb] Write Protect is off
sd 8:0:1:0: [sdb] Mode Sense: 7f 00 00 08
scsi 8:0:3:0: Direct-Access ATA Hitachi HTS72505 A3A0 PQ: 0 ANSI: 6
scsi 8:0:3:0: SATA: handle(0x000c), sas_addr(0x4433221101000000), phy(1), device_name(0x5000cca662c3ba7e)
scsi 8:0:3:0: SATA: enclosure_logical_id(0x500304800baf2d00), slot(1)
scsi 8:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 8:0:3:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
sd 8:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:3:0: Attached scsi generic sg4 type 0
sd 8:0:3:0: [sdd] physical block alignment offset: 4096
sd 8:0:3:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 8:0:3:0: [sdd] 4096-byte physical blocks
sd 8:0:2:0: [sdc] Write Protect is off
sd 8:0:2:0: [sdc] Mode Sense: 7f 00 00 08
sd 8:0:2:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:3:0: [sdd] Write Protect is off
sd 8:0:3:0: [sdd] Mode Sense: 7f 00 00 08
scsi 8:0:4:0: Direct-Access ATA ST98823AS 3.04 PQ: 0 ANSI: 6
scsi 8:0:4:0: SATA: handle(0x000d), sas_addr(0x4433221104000000), phy(4), device_name(0x0d231f12786f412f)
scsi 8:0:4:0: SATA: enclosure_logical_id(0x500304800baf2d00), slot(4)
sd 8:0:3:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 8:0:4:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 8:0:4:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
sd 8:0:4:0: Attached scsi generic sg5 type 0
sd 8:0:4:0: [sde] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sda: sda1 sda2 sda3
sd 8:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2
sdc: sdc1 sdc2
sd 8:0:1:0: [sdb] Attached SCSI disk
sd 8:0:2:0: [sdc] Attached SCSI disk
sdd: sdd1 sdd2
sd 8:0:3:0: [sdd] Attached SCSI disk
sd 8:0:4:0: [sde] Write Protect is off
sd 8:0:4:0: [sde] Mode Sense: 7f 00 00 08
sd 8:0:4:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2
sd 8:0:4:0: [sde] Attached SCSI disk
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:12.0: irq 16, io mem 0xdfdf7000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 3.9.2-gentoo ohci_hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:12.1: irq 16, io mem 0xdfdf6000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.9.2-gentoo ohci_hcd
usb usb2: SerialNumber: 0000:00:12.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.0: irq 18, io mem 0xdfdfa000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.9.2-gentoo ohci_hcd
usb usb3: SerialNumber: 0000:00:13.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.1: irq 18, io mem 0xdfdf9000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.9.2-gentoo ohci_hcd
usb usb4: SerialNumber: 0000:00:13.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:14.5: irq 18, io mem 0xdfdfb000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.9.2-gentoo ohci_hcd
usb usb5: SerialNumber: 0000:00:14.5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-1: new full-speed USB device number 2 using ohci_hcd
usb 1-1: New USB device found, idVendor=0d8c, idProduct=0102
usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1: Product: USB Sound Device
input: USB Sound Device as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1:1.3/input/input0
hid-generic 0003:0D8C:0102.0001: input: USB HID v1.00 Device [USB Sound Device ] on usb-0000:00:12.0-1/input3
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
usb 2-2: new full-speed USB device number 2 using ohci_hcd
usb 2-2: New USB device found, idVendor=05ac, idProduct=1006
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: Keyboard Hub
usb 2-2: Manufacturer: Apple, Inc.
usb 2-2: SerialNumber: 000000000000
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 3 ports detected
device-mapper: raid: Loading target version 1.4.2
md: raid0 personality registered for level 0
usb 2-3: new low-speed USB device number 3 using ohci_hcd
md: linear personality registered for level -1
usb 2-3: New USB device found, idVendor=046d, idProduct=c05a
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: USB Optical Mouse
usb 2-3: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb2/2-3/2-3:1.0/input/input1
hid-generic 0003:046D:C05A.0002: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.1-3/input0
JFS: nTxBlock = 8192, nTxLock = 65536
usb 5-1: new full-speed USB device number 2 using ohci_hcd
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SPL: Loaded module v0.6.1-1
zunicode: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
usb 5-1: New USB device found, idVendor=0557, idProduct=2221
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Hermon USB hidmouse Device
usb 5-1: Manufacturer: Winbond Electronics Corp
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:14.5/usb5/5-1/5-1:1.0/input/input2
hid-generic 0003:0557:2221.0003: input: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:14.5-1/input0
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:14.5/usb5/5-1/5-1:1.1/input/input3
hid-generic 0003:0557:2221.0004: input: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:14.5-1/input1
usb 2-2.2: new low-speed USB device number 4 using ohci_hcd
usb 2-2.2: New USB device found, idVendor=05ac, idProduct=024f
usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2.2: Product: Apple Keyboard
usb 2-2.2: Manufacturer: Apple Inc.
input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:12.1/usb2/2-2/2-2.2/2-2.2:1.0/input/input4
apple 0003:05AC:024F.0005: input: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-0000:00:12.1-2.2/input0
input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:12.1/usb2/2-2/2-2.2/2-2.2:1.1/input/input5
apple 0003:05AC:024F.0006: input: USB HID v1.11 Device [Apple Inc. Apple Keyboard] on usb-0000:00:12.1-2.2/input1
ZFS: Loaded module v0.6.1-1, ZFS pool version 5000, ZFS filesystem version 5
fuse init (API version 7.21)
SPL: using hostid 0x00000000
NET: Registered protocol family 1
systemd-udevd[5880]: starting version 200
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
ACPI: Power Button [PWRF]
microcode: CPU0: patch_level=0x0600081c
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU1: patch_level=0x0600081c
microcode: CPU2: patch_level=0x0600081c
microcode: CPU3: patch_level=0x0600081c
microcode: CPU4: patch_level=0x0600081c
microcode: CPU5: patch_level=0x0600081c
microcode: CPU6: patch_level=0x0600081c
microcode: CPU7: patch_level=0x0600081c
microcode: CPU8: patch_level=0x0600081c
microcode: CPU9: patch_level=0x0600081c
microcode: CPU10: patch_level=0x0600081c
microcode: CPU11: patch_level=0x0600081c
microcode: CPU12: patch_level=0x0600081c
microcode: CPU13: patch_level=0x0600081c
microcode: CPU14: patch_level=0x0600081c
microcode: CPU15: patch_level=0x0600081c
microcode: CPU16: patch_level=0x0600081c
microcode: CPU17: patch_level=0x0600081c
microcode: CPU18: patch_level=0x0600081c
microcode: CPU19: patch_level=0x0600081c
microcode: CPU20: patch_level=0x0600081c
microcode: CPU21: patch_level=0x0600081c
microcode: CPU22: patch_level=0x0600081c
microcode: CPU23: patch_level=0x0600081c
microcode: CPU24: patch_level=0x0600081c
microcode: CPU25: patch_level=0x0600081c
microcode: CPU26: patch_level=0x0600081c
microcode: CPU27: patch_level=0x0600081c
microcode: CPU28: patch_level=0x0600081c
microcode: CPU29: patch_level=0x0600081c
microcode: CPU30: patch_level=0x0600081c
microcode: CPU31: patch_level=0x0600081c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: PC Speaker as /devices/platform/pcspkr/input/input8
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xdfdf8800
usb 1-1: USB disconnect, device number 2
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 3.9.2-gentoo ehci_hcd
usb usb6: SerialNumber: 0000:00:12.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xdfdf8c00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 3.9.2-gentoo ehci_hcd
usb usb7: SerialNumber: 0000:00:13.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
acpi-cpufreq: overriding BIOS provided _PSD data
PTP clock support registered
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
cfg80211: Calling CRDA to update world regulatory domain
00:0b: ttyS2 at I/O 0x3e8 (irq = 7) is a 16550A
usb 2-2: USB disconnect, device number 2
usb 2-2.2: USB disconnect, device number 4
igb: Intel(R) Gigabit Ethernet Network Driver - version 4.1.2-k
igb: Copyright (c) 2007-2013 Intel Corporation.
igb 0000:02:00.0: irq 46 for MSI/MSI-X
igb 0000:02:00.0: irq 47 for MSI/MSI-X
igb 0000:02:00.0: irq 48 for MSI/MSI-X
igb 0000:02:00.0: irq 49 for MSI/MSI-X
igb 0000:02:00.0: irq 50 for MSI/MSI-X
igb 0000:02:00.0: irq 51 for MSI/MSI-X
igb 0000:02:00.0: irq 52 for MSI/MSI-X
igb 0000:02:00.0: irq 53 for MSI/MSI-X
igb 0000:02:00.0: irq 54 for MSI/MSI-X
usbcore: registered new interface driver snd-usb-audio
ath: EEPROM regdomain: 0x21
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: AU
ath: Regpair used: 0x21
usb 2-3: USB disconnect, device number 3
igb 0000:02:00.0: added PHC on eth0
igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:25:90:ab:20:98
igb 0000:02:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:02:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:02:00.1: irq 55 for MSI/MSI-X
igb 0000:02:00.1: irq 56 for MSI/MSI-X
igb 0000:02:00.1: irq 57 for MSI/MSI-X
igb 0000:02:00.1: irq 58 for MSI/MSI-X
igb 0000:02:00.1: irq 59 for MSI/MSI-X
igb 0000:02:00.1: irq 60 for MSI/MSI-X
igb 0000:02:00.1: irq 61 for MSI/MSI-X
igb 0000:02:00.1: irq 62 for MSI/MSI-X
igb 0000:02:00.1: irq 63 for MSI/MSI-X
ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc900594c0000, irq=17
igb 0000:02:00.1: added PHC on eth1
igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:25:90:ab:20:99
igb 0000:02:00.1: eth1: PBA No: FFFFFF-0FF
igb 0000:02:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
systemd-udevd[5914]: renamed network interface wlan0 to wlp65s0
systemd-udevd[5899]: renamed network interface eth1 to enp2s0f1
systemd-udevd[5896]: renamed network interface eth0 to enp2s0f0
usb 6-5: new high-speed USB device number 3 using ehci-pci
usb 6-5: New USB device found, idVendor=05ac, idProduct=1006
usb 6-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-5: Product: Keyboard Hub
usb 6-5: Manufacturer: Apple, Inc.
usb 6-5: SerialNumber: 000000000000
hub 6-5:1.0: USB hub found
hub 6-5:1.0: 3 ports detected
usb 1-1: new full-speed USB device number 3 using ohci_hcd
usb 1-1: New USB device found, idVendor=0d8c, idProduct=0102
usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1: Product: USB Sound Device
usb_audio: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
usb_audio: [9] FU [Mic Playback Volume] ch = 2, val = -6144/1921/1
usb_audio: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
usb_audio: [11] FU [Line Playback Volume] ch = 2, val = -6144/1921/1
usb_audio: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
usb_audio: [8] FU [Mic Capture Volume] ch = 2, val = -4096/2832/1
usb_audio: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
usb_audio: [15] FU [Line Capture Volume] ch = 2, val = -4096/2832/1
usb_audio: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
usb_audio: [2] FU [PCM Capture Volume] ch = 2, val = -4096/2832/1
input: USB Sound Device as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1:1.3/input/input9
hid-generic 0003:0D8C:0102.0007: input: USB HID v1.00 Device [USB Sound Device ] on usb-0000:00:12.0-1/input3
usb 2-3: new low-speed USB device number 5 using ohci_hcd
usb 2-3: New USB device found, idVendor=046d, idProduct=c05a
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: USB Optical Mouse
usb 2-3: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb2/2-3/2-3:1.0/input/input10
hid-generic 0003:046D:C05A.0008: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.1-3/input0
usb 6-5.2: new low-speed USB device number 5 using ehci-pci
usb 6-5.2: New USB device found, idVendor=05ac, idProduct=024f
usb 6-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-5.2: Product: Apple Keyboard
usb 6-5.2: Manufacturer: Apple Inc.
input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:12.2/usb6/6-5/6-5.2/6-5.2:1.0/input/input11
apple 0003:05AC:024F.0009: input: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-0000:00:12.2-5.2/input0
input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:12.2/usb6/6-5/6-5.2/6-5.2:1.1/input/input12
apple 0003:05AC:024F.000A: input: USB HID v1.11 Device [Apple Inc. Apple Keyboard] on usb-0000:00:12.2-5.2/input1
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): wlp65s0: link is not ready
vgaarb: device changed decodes: PCI:0000:42:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:42:00.0 to PCI:0000:01:04.0
IPv6: ADDRCONF(NETDEV_UP): wlp65s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp65s0: link is not ready
NET: Registered protocol family 17
wlp65s0: authenticate with 84:c9:b2:0f:d5:78
wlp65s0: No basic rates, using min rate instead
wlp65s0: send auth to 84:c9:b2:0f:d5:78 (try 1/3)
wlp65s0: send auth to 84:c9:b2:0f:d5:78 (try 2/3)
wlp65s0: authenticated
wlp65s0: associate with 84:c9:b2:0f:d5:78 (try 1/3)
wlp65s0: RX AssocResp from 84:c9:b2:0f:d5:78 (capab=0x911 status=0 aid=2)
IPv6: ADDRCONF(NETDEV_CHANGE): wlp65s0: link becomes ready
wlp65s0: associated
wlp65s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 84:c9:b2:0f:d5:78