dmesg - hdw-nas4free-9101-nfs-standalone
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.7.4-i7native (root@Eagle-Eye) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #1 SMP Fri Mar 8 14:33:44 PST 2013 (Ubuntu 3.5.0-25.39-generic 3.5.7.4)
Command line: BOOT_IMAGE=/vmlinuz-3.5.7.4-i7native root=/dev/mapper/EaglesNest-Root ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ce5b9fff] usable
BIOS-e820: [mem 0x00000000ce5ba000-0x00000000ce6cafff] ACPI NVS
BIOS-e820: [mem 0x00000000ce6cb000-0x00000000ce6d3fff] ACPI data
BIOS-e820: [mem 0x00000000ce6d4000-0x00000000ceaa2fff] reserved
BIOS-e820: [mem 0x00000000ceaa3000-0x00000000ceab3fff] ACPI NVS
BIOS-e820: [mem 0x00000000ceab4000-0x00000000cead5fff] reserved
BIOS-e820: [mem 0x00000000cead6000-0x00000000cead7fff] usable
BIOS-e820: [mem 0x00000000cead8000-0x00000000ceb24fff] reserved
BIOS-e820: [mem 0x00000000ceb25000-0x00000000ceb2efff] ACPI NVS
BIOS-e820: [mem 0x00000000ceb2f000-0x00000000ceb61fff] reserved
BIOS-e820: [mem 0x00000000ceb62000-0x00000000ced64fff] ACPI NVS
BIOS-e820: [mem 0x00000000ced65000-0x00000000ceffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000082fffffff] usable
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: System manufacturer System Product Name/RAMPAGE IV GENE, BIOS 1404 06/04/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x830000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FF800000000 write-back
1 base 000800000000 mask 3FFFE0000000 write-back
2 base 000820000000 mask 3FFFF0000000 write-back
3 base 0000CF800000 mask 3FFFFF800000 uncachable
4 base 0000D0000000 mask 3FFFF0000000 uncachable
5 base 0000E0000000 mask 3FFFE0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 32GB, range: 512MB, type WB
reg 2, base: 33280MB, range: 256MB, type WB
reg 3, base: 3320MB, range: 8MB, type UC
reg 4, base: 3328MB, range: 256MB, type UC
reg 5, base: 3584MB, range: 512MB, type UC
total RAM covered: 32760M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3320MB, range: 8MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
reg 6, base: 16GB, range: 16GB, type WB
reg 7, base: 32GB, range: 512MB, type WB
reg 8, base: 33280MB, range: 256MB, type WB
e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcef0-0x000fceff] mapped at [ffff8800000fcef0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xceffffff]
[mem 0x00000000-0xbfffffff] page 1G
[mem 0xc0000000-0xceffffff] page 2M
kernel direct mapping tables up to 0xceffffff @ [mem 0x1fffe000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x82fffffff]
[mem 0x100000000-0x7ffffffff] page 1G
[mem 0x800000000-0x82fffffff] page 2M
kernel direct mapping tables up to 0x82fffffff @ [mem 0xceffe000-0xceffffff]
RAMDISK: [mem 0x35302000-0x36978fff]
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000ce6cb068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000ce6d2a48 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000ce6cb140 07903 (v02 ALASKA A M I 00000006 INTL 20051117)
ACPI: FACS 00000000ceb2cf80 00040
ACPI: APIC 00000000ce6d2b40 000BE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000ce6d2c00 002AA (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000ce6d2eb0 0003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: DMAR 00000000ce6d2ef0 000AC (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000082fffffff]
Initmem setup node 0 [mem 0x00000000-0x82fffffff]
NODE_DATA [mem 0x82fffc000-0x82fffffff]
[ffffea0000000000-ffffea0020bfffff] PMD -> [ffff88080f600000-ffff88082f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x82fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0xce5b9fff]
node 0: [mem 0xcead6000-0xcead7fff]
node 0: [mem 0xced65000-0xceffffff]
node 0: [mem 0x100000000-0x82fffffff]
On node 0 totalpages: 8382436
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 825495 pages, LIFO batch:31
Normal zone: 117760 pages used for memmap
Normal zone: 7418880 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000ce5ba000 - 00000000ce6cb000
PM: Registered nosave memory: 00000000ce6cb000 - 00000000ce6d4000
PM: Registered nosave memory: 00000000ce6d4000 - 00000000ceaa3000
PM: Registered nosave memory: 00000000ceaa3000 - 00000000ceab4000
PM: Registered nosave memory: 00000000ceab4000 - 00000000cead6000
PM: Registered nosave memory: 00000000cead8000 - 00000000ceb25000
PM: Registered nosave memory: 00000000ceb25000 - 00000000ceb2f000
PM: Registered nosave memory: 00000000ceb2f000 - 00000000ceb62000
PM: Registered nosave memory: 00000000ceb62000 - 00000000ced65000
PM: Registered nosave memory: 00000000cf000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xcf000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88082fc00000 s83584 r8192 d22912 u131072
pcpu-alloc: s83584 r8192 d22912 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8248286
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.5.7.4-i7native root=/dev/mapper/EaglesNest-Root ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32899192k/34340864k available (6724k kernel code, 811120k absent, 630552k reserved, 6447k data, 932k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:1184 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 3209.541 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6419.08 BogoMIPS (lpj=12838164)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25074 entries in 98 pages
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: RMRR base: 0x000000cea94000 end: 0x000000ceaa2fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0
IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok.
Brought up 12 CPUs
Total of 12 processors activated (77028.98 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xce5ba000-0xce6cafff] (1118208 bytes)
PM: Registering ACPI NVS region [mem 0xceaa3000-0xceab3fff] (69632 bytes)
PM: Registering ACPI NVS region [mem 0xceb25000-0xceb2efff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0xceb62000-0xced64fff] (2109440 bytes)
dummy:
RTC time: 18:17:10, date: 05/13/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000ceb26018 00B58 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00B58 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: SSDT 00000000ceb25d98 00150 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00150 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfbffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfbffffff]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 10: [mem 0xf9129000-0xf9129fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf9128000-0xf912800f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf9127000-0xf91273ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf9100000-0xf9103fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf9126000-0xf91263ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xf9125000-0xf91257ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf9124000-0xf91240ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:03:00.0: [1924:0813] type 00 class 0x020000
pci 0000:03:00.0: reg 10: [io 0xc100-0xc1ff]
pci 0000:03:00.0: reg 18: [mem 0xf8000000-0xf8ffffff 64bit]
pci 0000:03:00.0: reg 20: [mem 0xf9050000-0xf905ffff 64bit]
pci 0000:03:00.0: reg 30: [mem 0xf9020000-0xf903ffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot
pci 0000:03:00.1: [1924:0813] type 00 class 0x020000
pci 0000:03:00.1: reg 10: [io 0xc000-0xc0ff]
pci 0000:03:00.1: reg 18: [mem 0xf7000000-0xf7ffffff 64bit]
pci 0000:03:00.1: reg 20: [mem 0xf9040000-0xf904ffff 64bit]
pci 0000:03:00.1: reg 30: [mem 0xf9000000-0xf901ffff pref]
pci 0000:03:00.1: PME# supported from D0 D3hot
pci 0000:00:01.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xf7000000-0xf90fffff]
pci 0000:01:00.0: [1002:6819] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfb200000-0xfb23ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfb240000-0xfb25ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfb260000-0xfb263fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1924:0803] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 18: [mem 0xfa000000-0xfaffffff 64bit]
pci 0000:02:00.0: reg 20: [mem 0xfb020000-0xfb02ffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0xfb000000-0xfb01ffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:11.0: PCI bridge to [bus 04-04]
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfbffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x14) granted
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
PCI host bridge to bus 0000:ff
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
pci0000:ff: Requesting ACPI _OSC control (0x1d)
pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xce5ba000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcead8000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-fe]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x03af window]
pnp 00:00: [io 0x03e0-0x0cf7 window]
pnp 00:00: [io 0x03b0-0x03df window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xd0000000-0xfbffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfeafffff]
pnp 00:01: [mem 0xfbfff000-0xfbffffff]
pnp 00:01: [mem 0xfeb00000-0xfebfffff]
pnp 00:01: [mem 0xfed00400-0xfed3ffff]
pnp 00:01: [mem 0xfed45000-0xfedfffff]
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:01: [mem 0xfbfff000-0xfbffffff] has been reserved
system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:01: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [mem 0xfbffc000-0xfbffdfff]
system 00:02: [mem 0xfbffc000-0xfbffdfff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0290-0x029f]
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0081-0x0083]
pnp 00:04: [io 0x0087]
pnp 00:04: [io 0x0089-0x008b]
pnp 00:04: [io 0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0070-0x0071]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x005f]
pnp 00:07: [io 0x0063]
pnp 00:07: [io 0x0065]
pnp 00:07: [io 0x0067-0x006f]
pnp 00:07: [io 0x0072-0x007f]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x00f0-0x00ff]
pnp 00:08: [irq 13]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:09: [io 0x0400-0x0453]
pnp 00:09: [io 0x0458-0x047f]
pnp 00:09: [io 0x1180-0x119f]
pnp 00:09: [io 0x0500-0x057f]
pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
pnp 00:09: [mem 0xfec00000-0xfecfffff]
pnp 00:09: [mem 0xfed08000-0xfed08fff]
pnp 00:09: [mem 0xff000000-0xffffffff]
system 00:09: [io 0x0400-0x0453] has been reserved
system 00:09: [io 0x0458-0x047f] has been reserved
system 00:09: [io 0x1180-0x119f] has been reserved
system 00:09: [io 0x0500-0x057f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0a: [io 0x0454-0x0457]
system 00:0a: [io 0x0454-0x0457] has been reserved
system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0b: [bus ff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
pci 0000:00:01.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xf7000000-0xf90fffff]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:11.0: PCI bridge to [bus 04-04]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xd0000000-0xfbffffff]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xf7000000-0xf90fffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x03af]
pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:05: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:05: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: resource 10 [mem 0xd0000000-0xfbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xca5ba000-0xce5b9fff] (64MB) mapped at [ffff8800ca5ba000-ffff8800ce5b9fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1368469030.544:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 32768
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 65 for MSI/MSI-X
pcieport 0000:00:02.0: irq 66 for MSI/MSI-X
pcieport 0000:00:03.0: irq 67 for MSI/MSI-X
pcieport 0000:00:11.0: irq 68 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:11.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Freeing initrd memory: 23004k freed
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 69 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf9125000 port 0xf9125100 irq 69
ata2: SATA max UDMA/133 abar m2048@0xf9125000 port 0xf9125180 irq 69
ata3: SATA max UDMA/133 abar m2048@0xf9125000 port 0xf9125200 irq 69
ata4: SATA max UDMA/133 abar m2048@0xf9125000 port 0xf9125280 irq 69
ata5: SATA max UDMA/133 abar m2048@0xf9125000 port 0xf9125300 irq 69
ata6: SATA max UDMA/133 abar m2048@0xf9125000 port 0xf9125380 irq 69
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 21, io mem 0xf9127000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.7.4-i7native ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf9126000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.7.4-i7native ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 13:598:291
tty tty24: hash matches
pci 0000:ff:0a.1: hash matches
memory memory153: hash matches
rtc_cmos 00:05: setting system clock to 2013-05-13 18:17:10 UTC (1368469030)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: ATAPI iHBS212 2, HL03, max UDMA/100
ata2.00: ATA-8: ST95005620AS, SD28, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: ATA-8: ST95005620AS, SD28, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: ATA-8: ST95005620AS, SD28, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ATA-8: ST95005620AS, SD28, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/100
ata2.00: configured for UDMA/133
ata3.00: configured for UDMA/133
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata4.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST95005620AS SD28 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access ATA ST95005620AS SD28 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
sd 1:0:0:0: [sdb] Attached SCSI disk
scsi 2:0:0:0: Direct-Access ATA ST95005620AS SD28 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 sdc3 sdc4 sdc5 sdc6 sdc7 sdc8
sd 2:0:0:0: [sdc] Attached SCSI disk
scsi 3:0:0:0: Direct-Access ATA ST95005620AS SD28 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8
sd 3:0:0:0: [sdd] Attached SCSI disk
scsi 4:0:0:0: CD-ROM ATAPI iHBS212 2 HL03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg4 type 5
Freeing unused kernel memory: 932k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1456k freed
Freeing unused kernel memory: 1140k freed
udevd[148]: starting version 175
wmi: Mapper loaded
Solarflare NET driver v3.1
sfc 0000:03:00.0: (unregistered net_device): Solarflare NIC detected
sfc 0000:03:00.0: (unregistered net_device): Part Number : SFN5161T
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
sfc 0000:03:00.0: irq 70 for MSI/MSI-X
sfc 0000:03:00.0: irq 71 for MSI/MSI-X
sfc 0000:03:00.0: irq 72 for MSI/MSI-X
sfc 0000:03:00.0: irq 73 for MSI/MSI-X
sfc 0000:03:00.0: irq 74 for MSI/MSI-X
sfc 0000:03:00.0: irq 75 for MSI/MSI-X
sfc 0000:03:00.1: (unregistered net_device): Solarflare NIC detected
md: bind
sfc 0000:03:00.1: (unregistered net_device): Part Number : SFN5161T
md: bind
sfc 0000:03:00.0: eth0: MC Scheduler error address=0x81a10
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: kicking non-fresh sdd3 from array!
md: unbind
sfc 0000:03:00.1: irq 76 for MSI/MSI-X
sfc 0000:03:00.1: irq 77 for MSI/MSI-X
sfc 0000:03:00.1: irq 78 for MSI/MSI-X
sfc 0000:03:00.1: irq 79 for MSI/MSI-X
sfc 0000:03:00.1: irq 80 for MSI/MSI-X
sfc 0000:03:00.1: irq 81 for MSI/MSI-X
sfc 0000:02:00.0: (unregistered net_device): Solarflare NIC detected
md: export_rdev(sdd3)
md: raid10 personality registered for level 10
bio: create slab at 1
md/raid10:md2: active with 2 out of 4 devices
created bitmap (2 pages) for device md2
md2: bitmap initialized from disk: read 1 pages, set 1905 of 2979 bits
sfc 0000:02:00.0: (unregistered net_device): Part Number : SFN5152F
md2: detected capacity change from 0 to 199863828480
md2: unknown partition table
md: bind
md: bind
md: bind
sfc 0000:02:00.0: irq 82 for MSI/MSI-X
sfc 0000:02:00.0: irq 83 for MSI/MSI-X
sfc 0000:02:00.0: irq 84 for MSI/MSI-X
sfc 0000:02:00.0: irq 85 for MSI/MSI-X
sfc 0000:02:00.0: irq 86 for MSI/MSI-X
sfc 0000:02:00.0: irq 87 for MSI/MSI-X
usb 2-1: new high-speed USB device number 2 using ehci_hcd
md: bind
md: bind
md: bind
md: bind
md: kicking non-fresh sdb4 from array!
md: unbind
md: export_rdev(sdb4)
md: kicking non-fresh sdd4 from array!
md: unbind
md: export_rdev(sdd4)
md/raid10:md3: active with 2 out of 4 devices
created bitmap (2 pages) for device md3
md3: bitmap initialized from disk: read 1 pages, set 484 of 2979 bits
md3: detected capacity change from 0 to 199863828480
md: bind
md3: unknown partition table
md: bind
md/raid10:md6: active with 4 out of 4 devices
created bitmap (2 pages) for device md6
md6: bitmap initialized from disk: read 1 pages, set 0 of 2055 bits
md6: detected capacity change from 0 to 137867821056
md: bind
md6: unknown partition table
md: bind
md: raid1 personality registered for level 1
md/raid1:md0: active with 4 out of 4 mirrors
created bitmap (1 pages) for device md0
md0: bitmap initialized from disk: read 1 pages, set 0 of 15 bits
md0: detected capacity change from 0 to 998703104
md: bind
md0: unknown partition table
md: bind
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
md: kicking non-fresh sdb6 from array!
md: unbind
md: export_rdev(sdb6)
md: kicking non-fresh sdd6 from array!
md: unbind
md: export_rdev(sdd6)
md/raid10:md5: active with 2 out of 4 devices
created bitmap (2 pages) for device md5
md5: bitmap initialized from disk: read 1 pages, set 68 of 2979 bits
md5: detected capacity change from 0 to 199863828480
md: bind
md5: unknown partition table
md: bind
md: bind
md: kicking non-fresh sdb2 from array!
md: unbind
md: export_rdev(sdb2)
md: kicking non-fresh sdd2 from array!
md: unbind
md: export_rdev(sdd2)
md/raid10:md1: active with 2 out of 4 devices
created bitmap (1 pages) for device md1
md1: bitmap initialized from disk: read 1 pages, set 16 of 596 bits
md1: detected capacity change from 0 to 39964377088
md: bind
md1: unknown partition table
md: kicking non-fresh sdb5 from array!
md: unbind
Refined TSC clocksource calibration: 3209.593 MHz.
Switching to clocksource tsc
md: export_rdev(sdb5)
md: kicking non-fresh sdd5 from array!
md: unbind
md: export_rdev(sdd5)
md/raid10:md4: active with 2 out of 4 devices
created bitmap (2 pages) for device md4
md4: bitmap initialized from disk: read 1 pages, set 294 of 2979 bits
md4: detected capacity change from 0 to 199863828480
md4: unknown partition table
usb 2-1.4: new full-speed USB device number 3 using ehci_hcd
usb 2-1.4: New USB device found, idVendor=046d, idProduct=c52b
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4: Product: USB Receiver
usb 2-1.4: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input2
input: Logitech Unifying Device. Wireless PID:4002 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.2/0003:046D:C52B.0003/input/input2
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4002] on usb-0000:00:1d.0-1.4:1
input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.2/0003:046D:C52B.0003/input/input3
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:1d.0-1.4:2
vesafb: mode is 1280x720x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90017080000, using 3648k, total 3648k
Console: switching to colour frame buffer device 160x45
fb0: VESA VGA frame buffer device
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
async_tx: api initialized (async)
raid6: sse2x1 9397 MB/s
raid6: sse2x2 11589 MB/s
raid6: sse2x4 13385 MB/s
raid6: using algorithm sse2x4 (13385 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 21373.000 MB/sec
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
REISERFS (device dm-0): found reiserfs format "3.6" with standard journal
REISERFS (device dm-0): using ordered data mode
reiserfs: using flush barriers
REISERFS (device dm-0): journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device dm-0): checking transaction log (dm-0)
REISERFS (device dm-0): Using r5 hash to sort names
init: resolvconf pre-start process (655) terminated with status 127
init: resolvconf post-stop process (679) terminated with status 127
Adding 39027708k swap on /dev/md1. Priority:-1 extents:1 across:39027708k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
udevd[708]: starting version 175
lp: driver loaded but no devices found
w83627ehf: Found NCT6776F chip at 0x290
ACPI Warning: 0x0000000000000430-0x0000000000000433 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SMIE 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
EDAC MC: Ver: 2.1.0
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 88 for MSI/MSI-X
microcode: CPU0 sig=0x206d7, pf=0x4, revision=0x705
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this sytem
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
mei 0000:00:16.0: wd: failed to find the client
reiserfs: enabling write barrier flush mode
device-mapper: multipath: version 1.4.0 loaded
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0[ 4.992452] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input4
microcode: CPU1 sig=0x206d7, pf=0x4, revision=0x705
microcode: CPU2 sig=0x206d7, pf=0x4, revision=0x705
microcode: CPU3 sig=0x206d7, pf=0x4, revision=0x705
microcode: CPU4 sig=0x206d7, pf=0x4, revision=0x705
microcode: CPU5 sig=0x206d7, pf=0x4, revision=0x705
microcode: CPU6 sig=0x206d7, pf=0x4, revision=0x705
microcode: CPU7 sig=0x206d7, pf=0x4, revision=0x705
microcode: CPU8 sig=0x206d7, pf=0x4, revision=0x705
microcode: CPU9 sig=0x206d7, pf=0x4, revision=0x705
microcode: CPU10 sig=0x206d7, pf=0x4, revision=0x705
microcode: CPU11 sig=0x206d7, pf=0x4, revision=0x705
microcode: Microcode Update Driver: v2.00 , Peter Oruba
init: network-interface (eth6) pre-start process (1194) terminated with status 1
sfc 0000:03:00.0: eth7: link down
IPv6: ADDRCONF(NETDEV_UP): eth7: link is not ready
sfc 0000:02:00.0: eth5: link up at 10000Mbps full-duplex (MTU 1500)
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 31496 MBytes.
[fglrx] vendor: 1002 device: 6819 count: 1
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 12.10.5 [Mar 28 2013] with 1 minors
snd_hda_intel 0000:00:1b.0: irq 89 for MSI/MSI-X
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: irq 90 for MSI/MSI-X
JFS: nTxBlock = 8192, nTxLock = 65536
kjournald starting. Commit interval 5 seconds
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
EXT3-fs (md0): using internal journal
EXT3-fs (md0): mounted filesystem with ordered data mode
sfc 0000:03:00.0: eth7: link up at 10000Mbps full-duplex (MTU 9000)
IPv6: ADDRCONF(NETDEV_CHANGE): eth7: link becomes ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
init: statd-mounting (/opt/san/stor001) main process (1721) killed by TERM signal
init: statd-mounting (/opt/san/stor002) main process (1729) killed by TERM signal
init: statd-mounting (/opt/san/stor003) main process (1732) killed by TERM signal
init: statd-mounting (/opt/san/stor004) main process (1734) killed by TERM signal
FS-Cache: Loaded
init: statd-mounting (/opt/san/stor005) main process (1737) killed by TERM signal
init: statd-mounting (/opt/san/stor006) main process (1740) killed by TERM signal
init: statd-mounting (/opt/san/stor007) main process (1762) killed by TERM signal
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
init: idmapd-mounting (/opt/san/stor001) main process (1719) killed by TERM signal
init: idmapd-mounting (/opt/san/stor002) main process (1727) killed by TERM signal
init: idmapd-mounting (/opt/san/stor003) main process (1730) killed by TERM signal
init: idmapd-mounting (/opt/san/stor004) main process (1733) killed by TERM signal
init: idmapd-mounting (/opt/san/stor005) main process (1736) killed by TERM signal
init: idmapd-mounting (/opt/san/stor006) main process (1739) killed by TERM signal
init: idmapd-mounting (/opt/san/stor007) main process (1761) killed by TERM signal
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
sfc 0000:03:00.1: eth6: link down
IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
init: failsafe main process (1782) killed by TERM signal
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
ata1.00: configured for UDMA/133
ata1: EH complete
ata2.00: configured for UDMA/133
ata2: EH complete
ata3.00: configured for UDMA/133
ata3: EH complete
ata4.00: configured for UDMA/133
ata4: EH complete
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: Creating 12 devices ...
init: lightdm main process (2669) killed by TERM signal
Adding 1371904k swap on /dev/zram0. Priority:5 extents:1 across:1371904k SS
Adding 1371904k swap on /dev/zram1. Priority:5 extents:1 across:1371904k SS
Adding 1371904k swap on /dev/zram2. Priority:5 extents:1 across:1371904k SS
Adding 1371904k swap on /dev/zram3. Priority:5 extents:1 across:1371904k SS
Adding 1371904k swap on /dev/zram4. Priority:5 extents:1 across:1371904k SS
Adding 1371904k swap on /dev/zram5. Priority:5 extents:1 across:1371904k SS
Adding 1371904k swap on /dev/zram6. Priority:5 extents:1 across:1371904k SS
Adding 1371904k swap on /dev/zram7. Priority:5 extents:1 across:1371904k SS
Adding 1371904k swap on /dev/zram8. Priority:5 extents:1 across:1371904k SS
Adding 1371904k swap on /dev/zram9. Priority:5 extents:1 across:1371904k SS
Adding 1371904k swap on /dev/zram10. Priority:5 extents:1 across:1371904k SS
Adding 1371904k swap on /dev/zram11. Priority:5 extents:1 across:1371904k SS
fglrx_pci 0000:01:00.0: irq 91 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 3090
[fglrx] Firegl kernel thread PID: 3091
[fglrx] Firegl kernel thread PID: 3092
[fglrx] IRQ 91 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f87c000, size:484000
[fglrx] Reserved FB block: Unshared offset:7ffef000, size:11000
init: plymouth-stop pre-start process (4063) terminated with status 1
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
init: statd main process (1813) terminated with status 1
init: portmap main process (1362) terminated with status 2
nfs: server 10.10.11.15 not responding, still trying
nfs: server 10.10.11.15 OK
nfs: server 10.10.11.15 not responding, still trying
nfs: server 10.10.11.15 OK