dmesg - test
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.7.10-1.1-desktop (geeko@buildhost) (gcc version 4.7.2 20130108 [gcc-4_7-branch revision 195012] (SUSE Linux) ) #1 SMP PREEMPT Thu Feb 28 15:06:29 UTC 2013 (82d3f21)
Command line: BOOT_IMAGE=/vmlinuz-3.7.10-1.1-desktop root=/dev/mapper/system-root resume=/dev/system/swap splash=silent quiet showopts
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfecffff] usable
BIOS-e820: [mem 0x00000000cfed0000-0x00000000cfed0fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfed1000-0x00000000cfedffff] ACPI data
BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000062fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. X58A-UD7/X58A-UD7, BIOS FC 12/23/2010
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x630000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CCFFF write-protect
CD000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 0D0000000 mask FF0000000 uncachable
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask E00000000 write-back
5 base 400000000 mask C00000000 write-back
6 base 500000000 mask F00000000 write-back
7 base 600000000 mask FC0000000 write-back
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfed0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5e70-0x000f5e7f] mapped at [ffff8800000f5e70]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0xcfecffff]
[mem 0x00000000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcfecffff] page 4k
kernel direct mapping tables up to 0xcfecffff @ [mem 0x1fffa000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x62fffffff]
[mem 0x100000000-0x62fffffff] page 2M
kernel direct mapping tables up to 0x62fffffff @ [mem 0xcfeba000-0xcfecffff]
RAMDISK: [mem 0x33f64000-0x35fa9fff]
ACPI: RSDP 00000000000f7850 00014 (v00 GBT )
ACPI: RSDT 00000000cfed1040 00044 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfed10c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfed1180 0596A (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 00000000cfed0000 00040
ACPI: HPET 00000000cfed6cc0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfed6d40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 00000000cfed6d80 004D0 (v01 GBT 00000000 00000000)
ACPI: MATS 00000000cfed7250 00034 (v01 GBT 00000000 00000000)
ACPI: TAMG 00000000cfed72c0 00CB2 (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 00000000cfed6b40 0012C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 00000000cfed7f80 02B1C (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000062fffffff]
Initmem setup node 0 [mem 0x00000000-0x62fffffff]
NODE_DATA [mem 0x62ffec000-0x62fffffff]
[ffffea0000000000-ffffea0015bfffff] PMD -> [ffff880617600000-ffff88062c7fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x62fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0xcfecffff]
node 0: [mem 0x100000000-0x62fffffff]
On node 0 totalpages: 6291037
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3919 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833288 pages, LIFO batch:31
Normal zone: 74368 pages used for memmap
Normal zone: 5365120 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfed0000 - 00000000cfed1000
PM: Registered nosave memory: 00000000cfed1000 - 00000000cfee0000
PM: Registered nosave memory: 00000000cfee0000 - 00000000cff00000
PM: Registered nosave memory: 00000000cff00000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
e820: [mem 0xcff00000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88062fc00000 s81856 r8192 d20544 u131072
pcpu-alloc: s81856 r8192 d20544 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6202327
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.7.10-1.1-desktop root=/dev/mapper/system-root resume=/dev/system/swap splash=silent quiet showopts
bootsplash: silent mode.
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Memory: 24702920k/25952256k available (5770k kernel code, 788108k absent, 461228k reserved, 5184k data, 992k init)
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
NR_IRQS:33024 nr_irqs:808 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 100663296 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3103.569 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6207.13 BogoMIPS (lpj=3103569)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20120913
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (fam: 06, model: 1a, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7
Brought up 8 CPUs
smpboot: Total of 8 processors activated (49657.10 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xcfed0000-0xcfed0fff] (4096 bytes)
RTC time: 7:53:52, date: 05/01/13
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI BIOS Bug: Warning: Incorrect checksum in table [TAMG] - 0x8E, should be 0x8D (20120913/tbutils-324)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcfef0000-0xfebfffff]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
pci 0000:00:13.0: [8086:342d] type 00 class 0x080020
pci 0000:00:13.0: reg 10: [mem 0xfbfff000-0xfbffffff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:15.0: [8086:342f] type 00 class 0x080020
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xfbff4000-0xfbff7fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xfbffd000-0xfbffd3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
pci 0000:00:1f.2: reg 10: [io 0xf900-0xf907]
pci 0000:00:1f.2: reg 14: [io 0xf800-0xf803]
pci 0000:00:1f.2: reg 18: [io 0xf700-0xf707]
pci 0000:00:1f.2: reg 1c: [io 0xf600-0xf603]
pci 0000:00:1f.2: reg 20: [io 0xf500-0xf51f]
pci 0000:00:1f.2: reg 24: [mem 0xfbffc000-0xfbffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xfbffb000-0xfbffb0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
pci 0000:01:00.0: [1b4b:91a3] type 00 class 0x01018f
pci 0000:01:00.0: reg 10: [io 0xaf00-0xaf07]
pci 0000:01:00.0: reg 14: [io 0xae00-0xae03]
pci 0000:01:00.0: reg 18: [io 0xad00-0xad07]
pci 0000:01:00.0: reg 1c: [io 0xac00-0xac03]
pci 0000:01:00.0: reg 20: [io 0xab00-0xab0f]
pci 0000:01:00.0: reg 24: [mem 0xfb9ff000-0xfb9ff7ff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.0: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:02:00.0: reg 10: [mem 0xfbbfe000-0xfbbfffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:03:00.0: [10de:05b9] type 01 class 0x060400
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 03-06]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xf7000000-0xfaffffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:04:00.0: [10de:05b9] type 01 class 0x060400
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:02.0: [10de:05b9] type 01 class 0x060400
pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04-06]
pci 0000:03:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:03:00.0: bridge window [mem 0xf7000000-0xfaffffff]
pci 0000:03:00.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:05:00.0: [10de:1088] type 00 class 0x030200
pci 0000:05:00.0: reg 10: [mem 0xf9000000-0xf9ffffff]
pci 0000:05:00.0: reg 14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:05:00.0: reg 1c: [mem 0xee000000-0xefffffff 64bit pref]
pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:05:00.1: [10de:0e09] type 00 class 0x040300
pci 0000:05:00.1: reg 10: [mem 0xfaffc000-0xfaffffff]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [mem 0xf9000000-0xfaffffff]
pci 0000:04:00.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:06:00.0: [10de:1088] type 00 class 0x030000
pci 0000:06:00.0: reg 10: [mem 0xf7000000-0xf7ffffff]
pci 0000:06:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:06:00.0: reg 1c: [mem 0xde000000-0xdfffffff 64bit pref]
pci 0000:06:00.0: reg 24: [io 0xbf00-0xbf7f]
pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:06:00.1: [10de:0e09] type 00 class 0x040300
pci 0000:06:00.1: reg 10: [mem 0xf8ffc000-0xf8ffffff]
pci 0000:04:02.0: PCI bridge to [bus 06]
pci 0000:04:02.0: bridge window [io 0xb000-0xbfff]
pci 0000:04:02.0: bridge window [mem 0xf7000000-0xf8ffffff]
pci 0000:04:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [197b:2363] type 00 class 0x010400
pci 0000:08:00.0: reg 24: [mem 0xfb8fe000-0xfb8fffff]
pci 0000:08:00.0: PME# supported from D3hot
pci 0000:08:00.1: [197b:2363] type 00 class 0x010185
pci 0000:08:00.1: reg 10: [io 0x9f00-0x9f07]
pci 0000:08:00.1: reg 14: [io 0x9e00-0x9e03]
pci 0000:08:00.1: reg 18: [io 0x9d00-0x9d07]
pci 0000:08:00.1: reg 1c: [io 0x9c00-0x9c03]
pci 0000:08:00.1: reg 20: [io 0x9b00-0x9b0f]
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 08]
pci 0000:00:1c.1: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.1: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:09:00.0: [197b:2363] type 00 class 0x010185
pci 0000:09:00.0: reg 24: [mem 0xfbefe000-0xfbefffff]
pci 0000:09:00.0: PME# supported from D3hot
pci 0000:09:00.1: [197b:2363] type 00 class 0x010185
pci 0000:09:00.1: reg 10: [io 0xef00-0xef07]
pci 0000:09:00.1: reg 14: [io 0xee00-0xee03]
pci 0000:09:00.1: reg 18: [io 0xed00-0xed07]
pci 0000:09:00.1: reg 1c: [io 0xec00-0xec03]
pci 0000:09:00.1: reg 20: [io 0xeb00-0xeb0f]
pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:0a:00.0: reg 10: [io 0xde00-0xdeff]
pci 0000:0a:00.0: reg 18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
pci 0000:0a:00.0: reg 20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 0a]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
pci 0000:0b:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:0b:00.0: reg 10: [io 0xce00-0xceff]
pci 0000:0b:00.0: reg 18: [mem 0xfbcff000-0xfbcfffff 64bit pref]
pci 0000:0b:00.0: reg 20: [mem 0xfbcf8000-0xfbcfbfff 64bit pref]
pci 0000:0b:00.0: supports D1 D2
pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 0b]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff 64bit pref]
pci 0000:0c:06.0: [104c:8024] type 00 class 0x0c0010
pci 0000:0c:06.0: reg 10: [mem 0xfbaff000-0xfbaff7ff]
pci 0000:0c:06.0: reg 14: [mem 0xfbaf8000-0xfbafbfff]
pci 0000:0c:06.0: supports D1 D2
pci 0000:0c:06.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xcfef0000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:06:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
pci 0000:3f:00.0: [8086:2c41] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:3f:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:3f:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:3f:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:3f:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:3f:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:3f:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:3f:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:3f:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:3f:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:3f:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:3f:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:3f:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:3f:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:3f:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:3f:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfed0000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3f]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xcfef0000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0022-0x003f]
pnp 00:01: [io 0x0044-0x005f]
pnp 00:01: [io 0x0062-0x0063]
pnp 00:01: [io 0x0065-0x006f]
pnp 00:01: [io 0x0074-0x007f]
pnp 00:01: [io 0x0091-0x0093]
pnp 00:01: [io 0x00a2-0x00bf]
pnp 00:01: [io 0x00e0-0x00ef]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0290-0x029f]
pnp 00:01: [io 0x0800-0x087f]
pnp 00:01: [io 0x0290-0x0294]
pnp 00:01: [io 0x0880-0x088f]
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0290-0x0294] has been reserved
system 00:01: [io 0x0880-0x088f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x0090]
pnp 00:02: [io 0x0094-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [irq 0 disabled]
pnp 00:03: [irq 8]
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x0070-0x0073]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x03f0-0x03f5]
pnp 00:07: [io 0x03f7]
pnp 00:07: [irq 6]
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: [io 0x0400-0x047f]
pnp 00:08: [io 0x0580-0x05ff]
system 00:08: [io 0x0400-0x047f] has been reserved
system 00:08: [io 0x0580-0x05ff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xf0000000-0xf3ffffff]
system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0x000d7000-0x000d7fff]
pnp 00:0a: [mem 0x000f0000-0x000f7fff]
pnp 00:0a: [mem 0x000f8000-0x000fbfff]
pnp 00:0a: [mem 0x000fc000-0x000fffff]
pnp 00:0a: [mem 0xcfed0000-0xcfedffff]
pnp 00:0a: [mem 0x00000000-0x0009ffff]
pnp 00:0a: [mem 0x00100000-0xcfecffff]
pnp 00:0a: [mem 0xcfee0000-0xcfefffff]
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: [mem 0xfed10000-0xfed1dfff]
pnp 00:0a: [mem 0xfed20000-0xfed8ffff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
pnp 00:0a: [mem 0xffb00000-0xffb7ffff]
pnp 00:0a: [mem 0xfff00000-0xffffffff]
pnp 00:0a: [mem 0x000e0000-0x000effff]
system 00:0a: [mem 0x000d7000-0x000d7fff] has been reserved
system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0a: [mem 0xcfed0000-0xcfedffff] could not be reserved
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: [mem 0x00100000-0xcfecffff] could not be reserved
system 00:0a: [mem 0xcfee0000-0xcfefffff] could not be reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0a: [mem 0x000e0000-0x000effff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0b: [mem 0xffb80000-0xffbfffff]
pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 0a] add_size 400000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 400000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:01.0: BAR 15: assigned [mem 0xcff00000-0xcfffffff pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4000000-0xf41fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xf4400000-0xf45fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xf4600000-0xf47fffff 64bit pref]
pci 0000:00:1c.4: BAR 14: assigned [mem 0xf4800000-0xf4bfffff]
pci 0000:00:1c.5: BAR 14: assigned [mem 0xf4c00000-0xf4ffffff]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xcff00000-0xcff0ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:01.0: bridge window [mem 0xcff00000-0xcfffffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:05:00.0: BAR 6: assigned [mem 0xe8000000-0xe807ffff pref]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [mem 0xf9000000-0xfaffffff]
pci 0000:04:00.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:06:00.0: BAR 6: assigned [mem 0xd8000000-0xd807ffff pref]
pci 0000:04:02.0: PCI bridge to [bus 06]
pci 0000:04:02.0: bridge window [io 0xb000-0xbfff]
pci 0000:04:02.0: bridge window [mem 0xf7000000-0xf8ffffff]
pci 0000:04:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: PCI bridge to [bus 04-06]
pci 0000:03:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:03:00.0: bridge window [mem 0xf7000000-0xfaffffff]
pci 0000:03:00.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03-06]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xf7000000-0xfaffffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf41fffff]
pci 0000:00:1c.0: bridge window [mem 0xf4200000-0xf43fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 08]
pci 0000:00:1c.1: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.1: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1c.1: bridge window [mem 0xf4400000-0xf45fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.3: bridge window [mem 0xf4600000-0xf47fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0a]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xf4800000-0xf4bfffff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 0b]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xf4c00000-0xf4ffffff]
pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0c]
pci 0000:00:1e.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1c.0: enabling device (0000 -> 0003)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcfef0000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:01: resource 2 [mem 0xcff00000-0xcfffffff pref]
pci_bus 0000:02: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xf7000000-0xfaffffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xf7000000-0xfaffffff]
pci_bus 0000:04: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xf9000000-0xfaffffff]
pci_bus 0000:05: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:06: resource 1 [mem 0xf7000000-0xf8ffffff]
pci_bus 0000:06: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:07: resource 1 [mem 0xf4000000-0xf41fffff]
pci_bus 0000:07: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:08: resource 1 [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:08: resource 2 [mem 0xf4400000-0xf45fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0xe000-0xefff]
pci_bus 0000:09: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:09: resource 2 [mem 0xf4600000-0xf47fffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:0a: resource 1 [mem 0xf4800000-0xf4bfffff]
pci_bus 0000:0a: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
pci_bus 0000:0b: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:0b: resource 1 [mem 0xf4c00000-0xf4ffffff]
pci_bus 0000:0b: resource 2 [mem 0xfbc00000-0xfbcfffff 64bit pref]
pci_bus 0000:0c: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0c: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0c: resource 8 [mem 0xcfef0000-0xfebfffff]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:06:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 33048k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbeba000-0xcfeb9fff] (64MB) mapped at [ffff8800cbeba000-ffff8800cfeb9fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1367394832.511:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
ioapic: probe of 0000:00:13.0 failed with error -22
ioapic: probe of 0000:00:15.0 failed with error -22
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xdf000000, mapped to 0xffffc90007b00000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 45
ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 45
ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 45
ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 45
ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 45
ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 45
ahci 0000:01:00.0: irq 46 for MSI/MSI-X
ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
ahci 0000:01:00.0: port 0 can do FBS, forcing FBSCP
ahci 0000:01:00.0: port 1 can do FBS, forcing FBSCP
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff100 irq 46
ata8: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff180 irq 46
ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m8192@0xfb8fe000 port 0xfb8fe100 irq 17
ata10: SATA max UDMA/133 abar m8192@0xfb8fe000 port 0xfb8fe180 irq 17
ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi10 : ahci
scsi11 : ahci
ata11: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 19
ata12: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe180 irq 19
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbffe000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.7.10-1.1-desktop ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffd000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.7.10-1.1-desktop ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.7.10-1.1-desktop uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.7.10-1.1-desktop uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.7.10-1.1-desktop uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.7.10-1.1-desktop uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.7.10-1.1-desktop uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.7.10-1.1-desktop uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
ata8: SATA link down (SStatus 0 SControl 330)
ata1: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 10
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Key type dns_resolver registered
PM: Checking hibernation image partition /dev/system/swap
usb 1-1: new high-speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
ata7.00: ATA-9: C300-CTFDDAC256MAG, 0002, max UDMA/100
ata7.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/100
ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9.00: ATA-8: WDC WD10EACS-65D6B0, 01.01A01, max UDMA/133
ata9.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata9.00: configured for UDMA/133
ata10.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133
ata10.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata10.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 3103.574 MHz
Switching to clocksource tsc
ata3: SATA link down (SStatus 0 SControl 300)
usb 2-3: new high-speed USB device number 2 using ehci_hcd
usb 2-3: New USB device found, idVendor=0bb4, idProduct=0ca2
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: Android Phone
usb 2-3: Manufacturer: HTC
usb 2-3: SerialNumber: SH0CSRX00050
ata4: SATA link down (SStatus 0 SControl 300)
usb 3-2: new full-speed USB device number 2 using uhci_hcd
usb 3-2: New USB device found, idVendor=0c70, idProduct=f002
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: aquaduct
usb 3-2: Manufacturer: Aqua Computer GmbH & Co. KG
usb 3-2: SerialNumber: 02295-50304
input: Aqua Computer GmbH & Co. KG aquaduct as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input0
hid-generic 0003:0C70:F002.0001: input,hidraw0: USB HID v1.11 Keyboard [Aqua Computer GmbH & Co. KG aquaduct] on usb-0000:00:1a.0-2/input0
input: Aqua Computer GmbH & Co. KG aquaduct as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input1
hid-generic 0003:0C70:F002.0002: input,hidraw1: USB HID v1.12 Device [Aqua Computer GmbH & Co. KG aquaduct] on usb-0000:00:1a.0-2/input1
hid-generic 0003:0C70:F002.0003: hiddev0,hidraw2: USB HID v1.11 Device [Aqua Computer GmbH & Co. KG aquaduct] on usb-0000:00:1a.0-2/input2
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
ata5.00: configured for UDMA/100
usb 4-1: new full-speed USB device number 2 using uhci_hcd
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
usb 4-1: New USB device found, idVendor=051d, idProduct=0002
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1: Product: Back-UPS BR1500GI FW:878.L3 .I USB FW:L3
usb 4-1: Manufacturer: American Power Conversion
usb 4-1: SerialNumber: 3B1148X27015
hid-generic 0003:051D:0002.0004: hiddev0,hidraw3: USB HID v1.00 Device [American Power Conversion Back-UPS BR1500GI FW:878.L3 .I USB FW:L3 ] on usb-0000:00:1a.1-1/input0
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: Direct-Access ATA C300-CTFDDAC256M 0002 PQ: 0 ANSI: 5
sd 6:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 8:0:0:0: Direct-Access ATA WDC WD10EACS-65D 01.0 PQ: 0 ANSI: 5
sd 8:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
scsi 9:0:0:0: Direct-Access ATA WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5
sd 9:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 6:0:0:0: [sda] Attached SCSI disk
sd 9:0:0:0: [sdc] Write Protect is off
sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 8:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1
sd 9:0:0:0: [sdc] Attached SCSI disk
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 13:147:874
rtc_cmos 00:04: setting system clock to 2013-05-01 07:53:55 UTC (1367394835)
Freeing unused kernel memory: 992k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 364k freed
Freeing unused kernel memory: 108k freed
usb 4-2: new full-speed USB device number 3 using uhci_hcd
pata_jmicron 0000:08:00.1: setting latency timer to 64
scsi12 : pata_jmicron
scsi13 : pata_jmicron
ata13: PATA max UDMA/100 cmd 0x9f00 ctl 0x9e00 bmdma 0x9b00 irq 18
ata14: PATA max UDMA/100 cmd 0x9d00 ctl 0x9c00 bmdma 0x9b08 irq 18
pata_jmicron 0000:09:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:09:00.1: setting latency timer to 64
scsi14 : pata_jmicron
scsi15 : pata_jmicron
ata15: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 16
ata16: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 16
usb 4-2: New USB device found, idVendor=046d, idProduct=08b2
usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-1: new full-speed USB device number 2 using uhci_hcd
alua: device handler registered
emc: device handler registered
hp_sw: device handler registered
rdac: device handler registered
systemd-udevd[165]: starting version 195
ACPI: Requesting acpi_cpufreq
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:02:00.0: irq 16, io mem 0xfbbfe000
xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 52 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 53 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 54 for MSI/MSI-X
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.7.10-1.1-desktop xhci_hcd
usb usb9: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.7.10-1.1-desktop xhci_hcd
usb usb10: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
usb 5-1: New USB device found, idVendor=046d, idProduct=0a07
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Z-10 USB Speaker
usb 5-1: Manufacturer: Logitech
hid-generic 0003:046D:0A07.0005: hiddev0,hidraw4: USB HID v1.10 Device [Logitech Z-10 USB Speaker] on usb-0000:00:1a.2-1/input2
input: Logitech Z-10 USB Speaker as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.3/input/input2
hid-generic 0003:046D:0A07.0006: input,hidraw5: USB HID v1.10 Device [Logitech Z-10 USB Speaker] on usb-0000:00:1a.2-1/input3
usb 5-2: new full-speed USB device number 3 using uhci_hcd
usb 5-2: New USB device found, idVendor=045e, idProduct=028e
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Controller
usb 5-2: Manufacturer: ©Microsoft Corporation
usb 5-2: SerialNumber: 000AE4A
md: linear personality registered for level -1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
bio: create slab at 1
Btrfs loaded
device fsid d613f815-ab3e-4c23-b2bd-f6c653efc276 devid 1 transid 1648 /dev/dm-0
device fsid 43c61726-4200-49a3-b475-e34942c1ec62 devid 1 transid 1734 /dev/dm-1
PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
PM: Marking nosave pages: [mem 0xcfed0000-0xffffffff]
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
PM: Starting manual resume from disk
PM: Hibernation image partition 253:2 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
device fsid 43c61726-4200-49a3-b475-e34942c1ec62 devid 1 transid 1734 /dev/mapper/system-root
btrfs: disk space caching is enabled
Btrfs detected SSD devices, enabling SSD mode
usb 1-1.1: new full-speed USB device number 8 using ehci_hcd
systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
systemd[1]: systemd 195 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; suse)
systemd[1]: Inserted module 'autofs4'
systemd[1]: Set hostname to .
usb 1-1.1: New USB device found, idVendor=046d, idProduct=c24a
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: Gaming Mouse G600
usb 1-1.1: Manufacturer: Logitech
usb 1-1.1: SerialNumber: 5B123CCC7B500012
input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input3
hid-generic 0003:046D:C24A.0007: input,hidraw6: USB HID v1.11 Mouse [Logitech Gaming Mouse G600] on usb-0000:00:1a.7-1.1/input0
systemd[1]: Starting Collect Read-Ahead Data...
input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.1/input/input4
hid-generic 0003:046D:C24A.0008: input,hiddev0,hidraw7: USB HID v1.11 Keyboard [Logitech Gaming Mouse G600] on usb-0000:00:1a.7-1.1/input1
systemd[1]: Starting Replay Read-Ahead Data...
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Remote File Systems.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Expecting device dev-system-swap.device...
systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dC300\x2dCTFDDAC256MAG_00000000102502FBE38C\x2dpart1.device...
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting LSB: Set default boot entry if called...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Create dynamic rule for /dev/root link...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd[1]: Started Collect Read-Ahead Data.
systemd[1]: Started Replay Read-Ahead Data.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Started File System Check on Root Device.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
usb 1-1.2: new high-speed USB device number 9 using ehci_hcd
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
systemd-udevd[407]: starting version 195
usb 1-1.2: New USB device found, idVendor=058f, idProduct=6254
usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.2: Product: USB2.0Hub
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 4 ports detected
btrfs: disk space caching is enabled
usb 1-1.3: new full-speed USB device number 10 using ehci_hcd
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
wmi: Mapper loaded
Floppy drive(s): fd0 is 2.88M AMI BIOS
scsi 4:0:0:0: Attached scsi generic sg0 type 5
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:0: Attached scsi generic sg3 type 0
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
FDC 0 is a post-1991 82077
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:0a:00.0: irq 55 for MSI/MSI-X
r8169 0000:0a:00.0 eth0: RTL8168e/8111e at 0xffffc90003074000, 1c:6f:65:3f:6e:bb, XID 0c200000 IRQ 55
r8169 0000:0a:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20120913/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
r8169 0000:0b:00.0: irq 56 for MSI/MSI-X
r8169 0000:0b:00.0 eth1: RTL8168e/8111e at 0xffffc90007aa0000, 1c:6f:65:3f:6e:7a, XID 0c200000 IRQ 56
r8169 0000:0b:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
lpc_ich: Resource conflict(s) found affecting gpio_ich
Linux video capture interface: v2.00
pwc: Logitech QuickCam 4000 Pro USB webcam detected.
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
Registered led device: xpad0
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input7
usbcore: registered new interface driver xpad
input: PC Speaker as /devices/platform/pcspkr/input/input8
snd_hda_intel 0000:00:1b.0: irq 57 for MSI/MSI-X
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ALSA patch_realtek.c:1241 SKU: Nid=0x1d sku_cfg=0x4005e601
ALSA patch_realtek.c:1243 SKU: port_connectivity=0x1
ALSA patch_realtek.c:1244 SKU: enable_pcbeep=0x0
ALSA patch_realtek.c:1245 SKU: check_sum=0x00000005
ALSA patch_realtek.c:1246 SKU: customization=0x000000e6
ALSA patch_realtek.c:1247 SKU: external_amp=0x0
ALSA patch_realtek.c:1248 SKU: platform_type=0x0
ALSA patch_realtek.c:1249 SKU: swap=0x0
ALSA patch_realtek.c:1250 SKU: override=0x1
ALSA hda_auto_parser.c:318 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
ALSA hda_auto_parser.c:322 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA hda_auto_parser.c:326 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA hda_auto_parser.c:327 mono: mono_out=0x0
ALSA hda_auto_parser.c:330 dig-out=0x11/0x1e
ALSA hda_auto_parser.c:331 inputs:
ALSA hda_auto_parser.c:335 Rear Mic=0x18
ALSA hda_auto_parser.c:335 Front Mic=0x19
ALSA hda_auto_parser.c:335 Line=0x1a
ALSA hda_auto_parser.c:338 dig-in=0x1f
Initializing USB Mass Storage driver...
ALSA patch_realtek.c:1304 realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
ALSA patch_realtek.c:1320 realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
scsi16 : usb-storage 2-3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
vgaarb: device changed decodes: PCI:0000:06:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 310.44 Wed Mar 27 14:51:30 PDT 2013
usb 1-1.3: device descriptor read/64, error -32
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
hda_intel: Disabling MSI
firewire_ohci 0000:0c:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
ALSA hda_intel.c:1642 Enable delay in RIRB handling
device fsid 43c61726-4200-49a3-b475-e34942c1ec62 devid 1 transid 1735 /dev/dm-1
gpio_ich: GPIO from 195 to 255 on gpio_ich
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x11
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
device fsid d613f815-ab3e-4c23-b2bd-f6c653efc276 devid 1 transid 1648 /dev/dm-0
Adding 2097148k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:2097148k SS
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
usb 1-1.3: device descriptor read/64, error -32
pwc: Registered as video0.
input: PWC snapshot button as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/input/input17
usbcore: registered new interface driver Philips webcam
ALSA mixer.c:887 2:1: cannot get min/max values for control 2 (id 2)
ALSA clock.c:243 current rate 0 is different from the runtime rate 48000
ALSA clock.c:243 current rate 0 is different from the runtime rate 48000
ALSA mixer.c:887 1:0: cannot get min/max values for control 2 (id 1)
usbcore: registered new interface driver snd-usb-audio
usb 1-1.3: new full-speed USB device number 11 using ehci_hcd
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card1/input20
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card1/input21
hda_intel: Disabling MSI
ALSA hda_intel.c:2713 0000:06:00.1: Handle VGA-switcheroo audio client
ALSA hda_intel.c:1642 Enable delay in RIRB handling
usb 1-1.3: device descriptor read/64, error -32
firewire_core 0000:0c:06.0: created device fw0: GUID 0039e8bb001c6f65, S400
usb 1-1.3: device descriptor read/64, error -32
usb 1-1.3: new full-speed USB device number 12 using ehci_hcd
scsi 16:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2
sd 16:0:0:0: Attached scsi generic sg4 type 0
sd 16:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.3: device not accepting address 12, error -32
usb 1-1.3: new full-speed USB device number 13 using ehci_hcd
usb 1-1.3: device not accepting address 13, error -32
hub 1-1:1.0: unable to enumerate USB device on port 3
usb 9-1: new full-speed USB device number 2 using xhci_hcd
usb 9-1: New USB device found, idVendor=046d, idProduct=0a1d
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-1: Product: Logitech Wireless Headset H760
usb 9-1: Manufacturer: Logitech
ALSA stream.c:201 2:1:1 : no or invalid class specific endpoint descriptor
ALSA stream.c:201 2:2:1 : no or invalid class specific endpoint descriptor
ALSA mixer.c:887 2:0: cannot get min/max values for control 2 (id 2)
ALSA mixer.c:887 5:0: cannot get min/max values for control 2 (id 5)
input: Logitech Logitech Wireless Headset H760 as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/usb9/9-1/9-1:1.3/input/input22
hid-generic 0003:046D:0A1D.0009: input,hiddev0,hidraw8: USB HID v1.11 Device [Logitech Logitech Wireless Headset H760] on usb-0000:02:00.0-1/input3
usb 9-2: new full-speed USB device number 3 using xhci_hcd
usb 9-2: New USB device found, idVendor=046d, idProduct=c24d
usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-2: Product: Logitech G710 Keyboard
usb 9-2: Manufacturer: Logitech
input: Logitech Logitech G710 Keyboard as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/usb9/9-2/9-2:1.0/input/input23
hid-generic 0003:046D:C24D.000A: input,hidraw9: USB HID v1.11 Keyboard [Logitech Logitech G710 Keyboard] on usb-0000:02:00.0-2/input0
input: Logitech Logitech G710 Keyboard as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/usb9/9-2/9-2:1.1/input/input24
hid-generic 0003:046D:C24D.000B: input,hiddev0,hidraw10: USB HID v1.11 Keyboard [Logitech Logitech G710 Keyboard] on usb-0000:02:00.0-2/input1
usb 1-1.2.3: new low-speed USB device number 14 using ehci_hcd
usb 1-1.2.3: New USB device found, idVendor=0766, idProduct=0204
usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.3: Product: USB IR Combo Device
usb 1-1.2.3: Manufacturer: TopSeed Tech Corp.
input: TopSeed Tech Corp. USB IR Combo Device as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/input/input25
topseed 0003:0766:0204.000C: input,hidraw11: USB HID v1.00 Keyboard [TopSeed Tech Corp. USB IR Combo Device ] on usb-0000:00:1a.7-1.2.3/input0
input: TopSeed Tech Corp. USB IR Combo Device as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.1/input/input26
topseed 0003:0766:0204.000D: input,hiddev0,hidraw12: USB HID v1.00 Mouse [TopSeed Tech Corp. USB IR Combo Device ] on usb-0000:00:1a.7-1.2.3/input1
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:02.0/0000:06:00.1/sound/card2/input27
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:02.0/0000:06:00.1/sound/card2/input28
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:02.0/0000:06:00.1/sound/card2/input29
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:02.0/0000:06:00.1/sound/card2/input30
device fsid d613f815-ab3e-4c23-b2bd-f6c653efc276 devid 1 transid 1648 /dev/mapper/system-home
btrfs: disk space caching is enabled
Btrfs detected SSD devices, enabling SSD mode
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd-journald[379]: Received SIGUSR1
NET: Registered protocol family 17
r8169 0000:0a:00.0 eth0: link down
r8169 0000:0a:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:0a:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NVRM: GPU at 0000:06:00: GPU-fcf3e5be-c401-c288-fbfc-93d07713b1a9
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
NVRM: GPU at 0000:05:00: GPU-42855884-d83c-5c04-eac7-b2396ece14c0
NVRM: Xid (0000:05:00): 56, CMDre 00000000 00000088 0200cb05 00000007 00000000
NVRM: Xid (0000:05:00): 56, CMDre 00000000 0000008c 00000000 00000005 00000008
EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:1e6f:65ff:fe3f:6ebb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:1e6f:65ff:fe3f:6ebb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
fuse init (API version 7.20)
ALSA clock.c:243 current rate 0 is different from the runtime rate 44100
ALSA clock.c:243 current rate 0 is different from the runtime rate 44100
ALSA clock.c:243 current rate 0 is different from the runtime rate 44100
ALSA clock.c:243 current rate 0 is different from the runtime rate 44100
ALSA clock.c:243 current rate 0 is different from the runtime rate 44100
ALSA clock.c:243 current rate 0 is different from the runtime rate 44100
ALSA clock.c:243 current rate 0 is different from the runtime rate 44100
ALSA clock.c:243 current rate 0 is different from the runtime rate 44100
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:1e6f:65ff:fe3f:6ebb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
ALSA clock.c:243 current rate 0 is different from the runtime rate 48000
ALSA clock.c:243 current rate 0 is different from the runtime rate 48000
ALSA clock.c:243 current rate 0 is different from the runtime rate 48000
ALSA clock.c:243 current rate 0 is different from the runtime rate 48000
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:1e6f:65ff:fe3f:6ebb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:1e6f:65ff:fe3f:6ebb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:1e6f:65ff:fe3f:6ebb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=33:33:00:00:00:fb:24:65:11:5a:62:c2:86:dd SRC=fe80:0000:0000:0000:2665:11ff:fe5a:62c2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=82 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=42
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:1e6f:65ff:fe3f:6ebb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
ALSA clock.c:243 current rate 0 is different from the runtime rate 44100
ALSA clock.c:243 current rate 0 is different from the runtime rate 44100
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:1e6f:65ff:fe3f:6ebb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=33:33:00:00:00:fb:24:65:11:5a:62:c2:86:dd SRC=fe80:0000:0000:0000:2665:11ff:fe5a:62c2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=82 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=42
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=33:33:00:00:00:fb:24:65:11:5a:62:c2:86:dd SRC=fe80:0000:0000:0000:2665:11ff:fe5a:62c2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=82 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=42
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:1e6f:65ff:fe3f:6ebb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
ALSA clock.c:243 current rate 0 is different from the runtime rate 44100
ALSA clock.c:243 current rate 0 is different from the runtime rate 44100
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:1e6f:65ff:fe3f:6ebb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
ALSA clock.c:243 current rate 0 is different from the runtime rate 44100
ALSA clock.c:243 current rate 0 is different from the runtime rate 44100
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:1e6f:65ff:fe3f:6ebb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:1e6f:65ff:fe3f:6ebb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:1e6f:65ff:fe3f:6ebb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
btrfs: unlinked 1 orphans
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=33:33:00:00:00:fb:74:f0:6d:7e:4b:fc:86:dd SRC=fe80:0000:0000:0000:76f0:6dff:fe7e:4bfc DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=113 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=73
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=33:33:00:00:00:fb:74:f0:6d:7e:4b:fc:86:dd SRC=fe80:0000:0000:0000:76f0:6dff:fe7e:4bfc DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=490 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=450
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=33:33:00:00:00:fb:74:f0:6d:7e:4b:fc:86:dd SRC=fe80:0000:0000:0000:76f0:6dff:fe7e:4bfc DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=309 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=269
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=33:33:00:00:00:fb:74:f0:6d:7e:4b:fc:86:dd SRC=fe80:0000:0000:0000:76f0:6dff:fe7e:4bfc DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=490 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=450
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=33:33:00:00:00:fb:74:f0:6d:7e:4b:fc:86:dd SRC=fe80:0000:0000:0000:76f0:6dff:fe7e:4bfc DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=490 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=450
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=33:33:00:00:00:fb:74:f0:6d:7e:4b:fc:86:dd SRC=fe80:0000:0000:0000:76f0:6dff:fe7e:4bfc DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=113 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=73
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=33:33:00:00:00:fb:74:f0:6d:7e:4b:fc:86:dd SRC=fe80:0000:0000:0000:76f0:6dff:fe7e:4bfc DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=113 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=73
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=33:33:00:00:00:fb:24:65:11:5a:62:c2:86:dd SRC=fe80:0000:0000:0000:2665:11ff:fe5a:62c2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=82 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=42
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=33:33:00:00:00:fb:74:f0:6d:7e:4b:fc:86:dd SRC=fe80:0000:0000:0000:76f0:6dff:fe7e:4bfc DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=113 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=73
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=33:33:00:00:00:fb:24:65:11:5a:62:c2:86:dd SRC=fe80:0000:0000:0000:2665:11ff:fe5a:62c2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=82 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=42
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=33:33:00:00:00:fb:74:f0:6d:7e:4b:fc:86:dd SRC=fe80:0000:0000:0000:76f0:6dff:fe7e:4bfc DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=113 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=73
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 300)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:1e6f:65ff:fe3f:6ebb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=33:33:00:00:00:fb:74:f0:6d:7e:4b:fc:86:dd SRC=fe80:0000:0000:0000:76f0:6dff:fe7e:4bfc DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=113 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=73
ata12: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata12: irq_stat 0x00000040, connection status changed
ata12: SError: { DevExch }
ata12: limiting SATA link speed to 1.5 Gbps
ata12: hard resetting link
ata12: SATA link down (SStatus 0 SControl 310)
ata12: EH complete