dmesg - init0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.9.0-030900rc8-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201304211835 SMP Sun Apr 21 22:35:53 UTC 2013
Command line: BOOT_IMAGE=/vmlinuz-3.9.0-030900rc8-generic root=/dev/mapper/PV_01-LV_01 ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cdc44fff] usable
BIOS-e820: [mem 0x00000000cdc45000-0x00000000ce4e7fff] reserved
BIOS-e820: [mem 0x00000000ce4e8000-0x00000000ce8dafff] ACPI NVS
BIOS-e820: [mem 0x00000000ce8db000-0x00000000cee2dfff] reserved
BIOS-e820: [mem 0x00000000cee2e000-0x00000000cee2efff] usable
BIOS-e820: [mem 0x00000000cee2f000-0x00000000cf034fff] ACPI NVS
BIOS-e820: [mem 0x00000000cf035000-0x00000000cf452fff] usable
BIOS-e820: [mem 0x00000000cf453000-0x00000000cf7f3fff] reserved
BIOS-e820: [mem 0x00000000cf7f4000-0x00000000cf7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000082effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Professional, BIOS P1.90 10/12/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x82f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CDFFF write-protect
CE000-EAFFF uncachable
EB000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CF800000 mask FFFFFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000082f000000 aka 33520M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3320MB, range: 8MB, type UC
total RAM covered: 3320M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3320MB, range: 8MB, type UC
e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fda50-0x000fda5f] mapped at [ffff8800000fda50]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01f77000, 0x01f77fff] PGTABLE
BRK [0x01f78000, 0x01f78fff] PGTABLE
BRK [0x01f79000, 0x01f79fff] PGTABLE
init_memory_mapping: [mem 0x82ee00000-0x82effffff]
[mem 0x82ee00000-0x82effffff] page 2M
BRK [0x01f7a000, 0x01f7afff] PGTABLE
init_memory_mapping: [mem 0x82c000000-0x82edfffff]
[mem 0x82c000000-0x82edfffff] page 2M
init_memory_mapping: [mem 0x800000000-0x82bffffff]
[mem 0x800000000-0x82bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcdc44fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcdbfffff] page 2M
[mem 0xcdc00000-0xcdc44fff] page 4k
init_memory_mapping: [mem 0xcee2e000-0xcee2efff]
[mem 0xcee2e000-0xcee2efff] page 4k
BRK [0x01f7b000, 0x01f7bfff] PGTABLE
init_memory_mapping: [mem 0xcf035000-0xcf452fff]
[mem 0xcf035000-0xcf1fffff] page 4k
[mem 0xcf200000-0xcf3fffff] page 2M
[mem 0xcf400000-0xcf452fff] page 4k
init_memory_mapping: [mem 0xcf7f4000-0xcf7fffff]
[mem 0xcf7f4000-0xcf7fffff] page 4k
init_memory_mapping: [mem 0x100001000-0x7ffffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x7ffffffff] page 1G
RAMDISK: [mem 0x36688000-0x3733bfff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000ce8cb070 00064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000ce8d14a8 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130117/tbfadt-599)
ACPI: DSDT 00000000ce8cb170 06338 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000ce8d4080 00040
ACPI: APIC 00000000ce8d15b8 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000ce8d1658 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000ce8d16a0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: AAFT 00000000ce8d16e0 0008B (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 00000000ce8d1770 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 00000000ce8d17a8 01714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: IVRS 00000000ce8d2ec0 000E8 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000082effffff]
Initmem setup node 0 [mem 0x00000000-0x82effffff]
NODE_DATA [mem 0x82eff4000-0x82eff8fff]
[ffffea0000000000-ffffea0020bfffff] PMD -> [ffff88080e600000-ffff88082e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x82effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xcdc44fff]
node 0: [mem 0xcee2e000-0xcee2efff]
node 0: [mem 0xcf035000-0xcf452fff]
node 0: [mem 0xcf7f4000-0xcf7fffff]
node 0: [mem 0x100001000-0x82effffff]
On node 0 totalpages: 8376332
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 13122 pages used for memmap
DMA32 zone: 839792 pages, LIFO batch:31
Normal zone: 117696 pages used for memmap
Normal zone: 7532543 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000cdc45000 - 00000000ce4e8000
PM: Registered nosave memory: 00000000ce4e8000 - 00000000ce8db000
PM: Registered nosave memory: 00000000ce8db000 - 00000000cee2e000
PM: Registered nosave memory: 00000000cee2f000 - 00000000cf035000
PM: Registered nosave memory: 00000000cf453000 - 00000000cf7f4000
PM: Registered nosave memory: 00000000cf800000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
e820: [mem 0xcf800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88082ec00000 s85824 r8192 d20672 u262144
pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8245429
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.9.0-030900rc8-generic root=/dev/mapper/PV_01-LV_01 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 2046000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
Memory: 32819296k/34324480k available (7237k kernel code, 819152k absent, 686032k reserved, 6025k data, 1280k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
NR_IRQS:16640 nr_irqs:1288 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3600.319 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.63 BogoMIPS (lpj=14401276)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00cf800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20130117
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 29507 entries in 116 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8150 Eight-Core Processor (fam: 15, model: 01, stepping: 02)
Performance Events:
perf: AMD core performance counters detected
perf: AMD northbridge performance counters detected
AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 10
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 00000000000003ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (57605.10 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xce4e8000-0xce8dafff] (4141056 bytes)
PM: Registering ACPI NVS region [mem 0xcee2f000-0xcf034fff] (2121728 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130117/hwxface-568)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 24: [mem 0xfe80b000-0xfe80b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfe80a000-0xfe80afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfe809000-0xfe8090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfe808000-0xfe808fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfe807000-0xfe8070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfe800000-0xfe803fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfe806000-0xfe806fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.2: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 10: [mem 0xfe805000-0xfe805fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 10: [mem 0xfe804000-0xfe8040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:0e23] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd8000000-0xdbffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.1: [10de:0beb] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfe080000-0xfe083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
pci 0000:02:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:02:00.0: reg 10: [io 0xd040-0xd047]
pci 0000:02:00.0: reg 14: [io 0xd030-0xd033]
pci 0000:02:00.0: reg 18: [io 0xd020-0xd027]
pci 0000:02:00.0: reg 1c: [io 0xd010-0xd013]
pci 0000:02:00.0: reg 20: [io 0xd000-0xd00f]
pci 0000:02:00.0: reg 24: [mem 0xfe710000-0xfe7101ff]
pci 0000:02:00.0: reg 30: [mem 0xfe700000-0xfe70ffff pref]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:03:00.0: reg 10: [mem 0xfe600000-0xfe607fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:04:00.0: reg 10: [mem 0xfe500000-0xfe507fff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:05:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:05:00.0: reg 10: [mem 0xfe400000-0xfe407fff 64bit]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:00:07.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
pci 0000:07:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:07:00.0: reg 10: [mem 0xfe300000-0xfe3007ff 64bit]
pci 0000:07:00.0: reg 18: [io 0xc000-0xc0ff]
pci 0000:07:00.0: supports D2
pci 0000:07:00.0: PME# supported from D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 07]
pci 0000:00:15.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:15.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:08:00.0: [14e4:16b1] type 00 class 0x020000
pci 0000:08:00.0: reg 10: [mem 0xdc210000-0xdc21ffff 64bit pref]
pci 0000:08:00.0: reg 18: [mem 0xdc200000-0xdc20ffff 64bit pref]
pci 0000:08:00.0: reg 30: [mem 0xfe200000-0xfe2007ff pref]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 08]
pci 0000:00:15.1: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:15.1: bridge window [mem 0xdc200000-0xdc2fffff 64bit pref]
pci 0000:09:00.0: [14e4:16b1] type 00 class 0x020000
pci 0000:09:00.0: reg 10: [mem 0xdc110000-0xdc11ffff 64bit pref]
pci 0000:09:00.0: reg 18: [mem 0xdc100000-0xdc10ffff 64bit pref]
pci 0000:09:00.0: reg 30: [mem 0xfe100000-0xfe1007ff pref]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.2: PCI bridge to [bus 09]
pci 0000:00:15.2: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:15.2: bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
ACPI: No dock devices found.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcdc45000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcee2f000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf453000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
e820: reserve RAM buffer [mem 0x82f000000-0x82fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0xfeb20000-0xfeb23fff] could not be reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x040b] has been reserved
system 00:03: [io 0x04d6] has been reserved
system 00:03: [io 0x0c00-0x0c01] has been reserved
system 00:03: [io 0x0c14] has been reserved
system 00:03: [io 0x0c50-0x0c51] has been reserved
system 00:03: [io 0x0c52] has been reserved
system 00:03: [io 0x0c6c] has been reserved
system 00:03: [io 0x0c6f] has been reserved
system 00:03: [io 0x0cd0-0x0cd1] has been reserved
system 00:03: [io 0x0cd2-0x0cd3] has been reserved
system 00:03: [io 0x0cd4-0x0cd5] has been reserved
system 00:03: [io 0x0cd6-0x0cd7] has been reserved
system 00:03: [io 0x0cd8-0x0cdf] has been reserved
system 00:03: [io 0x0800-0x089f] has been reserved
system 00:03: [io 0x0b20-0x0b3f] has been reserved
system 00:03: [io 0x0900-0x090f] has been reserved
system 00:03: [io 0x0910-0x091f] has been reserved
system 00:03: [io 0xfe00-0xfefe] has been reserved
system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:03: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:03: [mem 0xffc00000-0xffffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 4]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0c: [dma 0 disabled]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 14 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:00:07.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:14.4: PCI bridge to [bus 06]
pci 0000:00:15.0: PCI bridge to [bus 07]
pci 0000:00:15.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:15.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:15.1: PCI bridge to [bus 08]
pci 0000:00:15.1: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:15.1: bridge window [mem 0xdc200000-0xdc2fffff 64bit pref]
pci 0000:00:15.2: PCI bridge to [bus 09]
pci 0000:00:15.2: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:15.2: bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:03: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:04: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:05: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:06: resource 4 [io 0x0000-0x03af]
pci_bus 0000:06: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:06: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:06: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:06: resource 10 [mem 0xd0000000-0xffffffff]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:08: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:08: resource 2 [mem 0xdc200000-0xdc2fffff 64bit pref]
pci_bus 0000:09: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:09: resource 2 [mem 0xdc100000-0xdc1fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13008k freed
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Interrupt remapping enabled
pci 0000:00:00.2: irq 72 for MSI/MSI-X
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc9c45000-0xcdc45000] (64MB) mapped at [ffff8800c9c45000-ffff8800cdc44fff]
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1367289507.896:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.21)
msgmni has been set to 32768
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe809000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.9.0-030900rc8-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfe807000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.9.0-030900rc8-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfe804000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.9.0-030900rc8-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe80a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.9.0-030900rc8-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe808000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.9.0-030900rc8-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe806000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.9.0-030900rc8-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe805000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.9.0-030900rc8-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:03:00.0: irq 73 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.9.0-030900rc8-generic xhci_hcd
usb usb8: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.9.0-030900rc8-generic xhci_hcd
usb usb9: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.9.0-030900rc8-generic xhci_hcd
usb usb10: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 3.9.0-030900rc8-generic xhci_hcd
usb usb11: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 12
xhci_hcd 0000:05:00.0: irq 75 for MSI/MSI-X
usb usb12: New USB device found, idVendor=1d6b, idProduct=0002
usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb12: Product: xHCI Host Controller
usb usb12: Manufacturer: Linux 3.9.0-030900rc8-generic xhci_hcd
usb usb12: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 12-0:1.0: USB hub found
hub 12-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 13
usb usb13: New USB device found, idVendor=1d6b, idProduct=0003
usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb13: Product: xHCI Host Controller
usb usb13: Manufacturer: Linux 3.9.0-030900rc8-generic xhci_hcd
usb usb13: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 13-0:1.0: USB hub found
hub 13-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 12c1cc8aa717823abc27a468e499980d709576e8'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1280k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 944k freed
Freeing unused kernel memory: 912k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
udevd[127]: starting version 175
microcode: CPU0: patch_level=0x06000626
microcode: CPU0: new patch_level=0x06000629
microcode: CPU1: patch_level=0x06000626
microcode: CPU2: patch_level=0x06000626
microcode: CPU2: new patch_level=0x06000629
microcode: CPU3: patch_level=0x06000626
usb 2-1: new high-speed USB device number 2 using ehci-pci
microcode: CPU4: patch_level=0x06000626
microcode: CPU4: new patch_level=0x06000629
microcode: CPU5: patch_level=0x06000626
microcode: CPU6: patch_level=0x06000626
microcode: CPU6: new patch_level=0x06000629
microcode: CPU7: patch_level=0x06000626
microcode: Microcode Update Driver: v2.00 , Peter Oruba
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe80b000 port 0xfe80b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfe80b000 port 0xfe80b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfe80b000 port 0xfe80b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe80b000 port 0xfe80b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfe80b000 port 0xfe80b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfe80b000 port 0xfe80b380 irq 19
ahci 0000:02:00.0: irq 76 for MSI/MSI-X
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi6 : ahci
PTP clock support registered
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfe710000 port 0xfe710100 irq 76
ata8: SATA max UDMA/133 abar m512@0xfe710000 port 0xfe710180 irq 76
tg3.c:v3.130 (February 14, 2013)
tg3 0000:08:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:0a:52:12
tg3 0000:08:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:08:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:08:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:09:00.0 eth1: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:0a:52:10
tg3 0000:09:00.0 eth1: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:09:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:09:00.0 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
firewire_ohci 0000:07:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb 2-1: New USB device found, idVendor=0409, idProduct=0058
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB2.0 Hub Controller
usb 2-1: Manufacturer: NEC Corporation
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 2-2: new high-speed USB device number 3 using ehci-pci
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
usb 2-2: New USB device found, idVendor=0cf3, idProduct=9271
usb 2-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 2-2: Product: USB2.0 WLAN
usb 2-2: Manufacturer: ATHEROS
usb 2-2: SerialNumber: 12345
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
ata2.00: ATA-8: Hitachi HDS5C3030ALA630, MEAOA580, max UDMA/133
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: ATA-8: WDC WD1500HLFS-01G6U0, 04.04V01, max UDMA/133
ata5.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Hitachi HDS5C303 MEAO PQ: 0 ANSI: 5
ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: ATAPI: HL-DT-ST BD-RE WH10LS30, 1.01, max UDMA/133
ata5.00: configured for UDMA/133
ata4.00: configured for UDMA/133
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: CD-ROM HL-DT-ST BD-RE WH10LS30 1.01 PQ: 0 ANSI: 5
ata6.00: ATA-8: WDC WD5000HHTZ-04N21V0, 04.06A00, max UDMA/133
ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg3 type 5
scsi 4:0:0:0: Direct-Access ATA WDC WD1500HLFS-0 04.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdd] 293046768 512-byte logical blocks: (150 GB/139 GiB)
sd 4:0:0:0: Attached scsi generic sg4 type 0
scsi 5:0:0:0: Direct-Access ATA WDC WD5000HHTZ-0 04.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sde] 4096-byte physical blocks
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2
sd 4:0:0:0: [sdd] Attached SCSI disk
sde: sde1 sde2 sde3 < sde5 >
sd 5:0:0:0: [sde] Attached SCSI disk
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
firewire_core 0000:07:00.0: created device fw0: GUID 008f13002b611000, S400
tsc: Refined TSC clocksource calibration: 3600.277 MHz
Switching to clocksource tsc
bio: create slab at 1
usb 7-3: new full-speed USB device number 2 using ohci_hcd
usb 7-3: New USB device found, idVendor=0a5c, idProduct=21e8
usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-3: Product: BCM20702A0
usb 7-3: Manufacturer: Broadcom Corp
usb 7-3: SerialNumber: 00027232D182
usb 2-1.1: new low-speed USB device number 4 using ehci-pci
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
usb 2-1.1: New USB device found, idVendor=046d, idProduct=c404
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: Trackball
usb 2-1.1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Trackball as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.1/2-1.1:1.0/input/input3
hid-generic 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:13.2-1.1/input0
usb 2-1.4: new low-speed USB device number 5 using ehci-pci
usb 2-1.4: New USB device found, idVendor=413c, idProduct=2003
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4: Product: Dell USB Keyboard
usb 2-1.4: Manufacturer: Dell
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.4/2-1.4:1.0/input/input4
hid-generic 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:13.2-1.4/input0
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Adding 15624188k swap on /dev/sde2. Priority:-1 extents:1 across:15624188k
udevd[482]: starting version 175
type=1400 audit(1367307518.561:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=711 comm="apparmor_parser"
type=1400 audit(1367307518.561:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=711 comm="apparmor_parser"
type=1400 audit(1367307518.561:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=711 comm="apparmor_parser"
type=1400 audit(1367307518.561:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=712 comm="apparmor_parser"
type=1400 audit(1367307518.561:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=712 comm="apparmor_parser"
type=1400 audit(1367307518.561:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=712 comm="apparmor_parser"
wmi: Mapper loaded
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
type=1400 audit(1367307518.593:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=755 comm="apparmor_parser"
type=1400 audit(1367307518.593:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=755 comm="apparmor_parser"
type=1400 audit(1367307518.593:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=755 comm="apparmor_parser"
MCE: In-kernel MCE decoding enabled.
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc9000306cb00). heartbeat=60 sec (nowayout=0)
lp: driver loaded but no devices found
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
type=1400 audit(1367307518.713:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=894 comm="apparmor_parser"
usbcore: registered new interface driver btusb
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
tg3 0000:08:00.0: irq 77 for MSI/MSI-X
tg3 0000:08:00.0: irq 78 for MSI/MSI-X
tg3 0000:08:00.0: irq 79 for MSI/MSI-X
tg3 0000:08:00.0: irq 80 for MSI/MSI-X
tg3 0000:08:00.0: irq 81 for MSI/MSI-X
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 2-2: ath9k_htc: Firmware htc_9271.fw requested
usbcore: registered new interface driver ath9k_htc
usb 2-2: ath9k_htc: Failed to get firmware htc_9271.fw
usb 2-2: ath9k_htc: USB layer deinitialized
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 310.44 Wed Mar 27 14:51:30 PDT 2013
init: udev-fallback-graphics main process (1043) terminated with status 1
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
kjournald starting. Commit interval 5 seconds
EXT3-fs (sde1): using internal journal
EXT3-fs (sde1): mounted filesystem with ordered data mode
init: avahi-cups-reload main process (1393) terminated with status 1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ppdev: user-space parallel port driver
tg3 0000:08:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:08:00.0 eth0: Flow control is on for TX and on for RX
tg3 0000:08:00.0 eth0: EEE is disabled
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: failsafe main process (1253) killed by TERM signal
tg3 0000:09:00.0: irq 82 for MSI/MSI-X
tg3 0000:09:00.0: irq 83 for MSI/MSI-X
tg3 0000:09:00.0: irq 84 for MSI/MSI-X
tg3 0000:09:00.0: irq 85 for MSI/MSI-X
tg3 0000:09:00.0: irq 86 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
audit_printk_skb: 12 callbacks suppressed
type=1400 audit(1367307549.742:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1711 comm="apparmor_parser"
type=1400 audit(1367307549.766:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1713 comm="apparmor_parser"
type=1400 audit(1367307549.846:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1706 comm="apparmor_parser"
type=1400 audit(1367307549.846:19): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1706 comm="apparmor_parser"
type=1400 audit(1367307549.890:20): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1704 comm="apparmor_parser"
type=1400 audit(1367307549.890:21): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1704 comm="apparmor_parser"
type=1400 audit(1367307549.890:22): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1705 comm="apparmor_parser"
type=1400 audit(1367307549.890:23): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1705 comm="apparmor_parser"
type=1400 audit(1367307549.898:24): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1707 comm="apparmor_parser"
type=1400 audit(1367307549.898:25): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1707 comm="apparmor_parser"
init: alsa-restore main process (1765) terminated with status 99
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x390 offMax=0x3c29
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.12 (interface 0x001a0004).
vboxpci: IOMMU found
NVRM: GPU at 0000:01:00: GPU-9dd60dee-3a9b-4fe0-fff3-45d014f5b452
usb 13-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 13-1: Parent hub missing LPM exit latency info. Power management will be impacted.
usb 13-1: New USB device found, idVendor=174c, idProduct=55aa
usb 13-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 13-1: Product: External HDD
usb 13-1: Manufacturer: Fantom
usb 13-1: SerialNumber: 201211160776
Initializing USB Mass Storage driver...
scsi8 : usb-storage 13-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 8:0:0:0: Direct-Access Fantom External HDD MX6O PQ: 0 ANSI: 5
sd 8:0:0:0: Attached scsi generic sg6 type 0
sd 8:0:0:0: [sdf] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 8:0:0:0: [sdf] Write Protect is off
sd 8:0:0:0: [sdf] Mode Sense: 23 00 00 00
sd 8:0:0:0: [sdf] No Caching mode page present
sd 8:0:0:0: [sdf] Assuming drive cache: write through
sd 8:0:0:0: [sdf] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 8:0:0:0: [sdf] No Caching mode page present
sd 8:0:0:0: [sdf] Assuming drive cache: write through
sdf: sdf1 sdf2 sdf3 sdf4 < sdf5 >
sd 8:0:0:0: [sdf] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 8:0:0:0: [sdf] No Caching mode page present
sd 8:0:0:0: [sdf] Assuming drive cache: write through
sd 8:0:0:0: [sdf] Attached SCSI disk
usb 11-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 11-1: Parent hub missing LPM exit latency info. Power management will be impacted.
usb 11-1: New USB device found, idVendor=0bc2, idProduct=3312
usb 11-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 11-1: Product: Expansion Desk
usb 11-1: Manufacturer: Seagate
usb 11-1: SerialNumber: NA4LDL6M
scsi9 : usb-storage 11-1:1.0
scsi 9:0:0:0: Direct-Access Seagate Expansion Desk 0319 PQ: 0 ANSI: 6
sd 9:0:0:0: Attached scsi generic sg7 type 0
usb 11-2: new SuperSpeed USB device number 3 using xhci_hcd
usb 11-2: Parent hub missing LPM exit latency info. Power management will be impacted.
usb 11-2: New USB device found, idVendor=067b, idProduct=1010
usb 11-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 11-2: Product: USB-SATA Bridge
usb 11-2: Manufacturer: ORICO
usb 11-2: SerialNumber: PROLIFICMP00000009C
scsi10 : usb-storage 11-2:1.0
scsi 10:0:0:0: Direct-Access INTEL SS DSC2CT240A4 335t PQ: 0 ANSI: 4
sd 10:0:0:0: Attached scsi generic sg8 type 0
sd 10:0:0:0: [sdh] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 10:0:0:0: [sdh] Write Protect is off
sd 10:0:0:0: [sdh] Mode Sense: 22 00 00 00
sd 10:0:0:0: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdh: sdh1
sd 10:0:0:0: [sdh] Attached SCSI disk
sd 9:0:0:0: [sdg] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 9:0:0:0: [sdg] Write Protect is off
sd 9:0:0:0: [sdg] Mode Sense: 2b 00 10 08
sd 9:0:0:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 9:0:0:0: [sdg] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sdg: sdg1
sd 9:0:0:0: [sdg] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 9:0:0:0: [sdg] Attached SCSI disk
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
EXT4-fs (sda2): barriers disabled
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro,discard,data=ordered,barrier=0,commit=60
EXT4-fs (sdh1): barriers disabled
EXT4-fs (sdh1): mounting with "discard" option, but the device does not support discard
EXT4-fs (sdh1): mounted filesystem with ordered data mode. Opts: errors=remount-ro,discard,data=ordered,barrier=0,commit=60
EXT4-fs (sdf5): barriers disabled
EXT4-fs (sdf5): mounted filesystem with ordered data mode. Opts: errors=remount-ro,data=ordered,barrier=0,commit=60
FS-Cache: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
CIFS VFS: No username specified
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
created IOMMU domain ffff88054ae69100
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
vboxnetflt: dropped 0 out of 9505 packets
created IOMMU domain ffff8804cde04e80
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
device eth0 entered promiscuous mode
created IOMMU domain ffff880537928480
i2c /dev entries driver
i2c /dev entries driver
hrtimer: interrupt took 271030 ns
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
ipmi-sensors:9846 map pfn expected mapping type uncached-minus for [mem 0xce8cb000-0xce8cbfff], got write-back
show_signal_msg: 27 callbacks suppressed
nvclock_gtk[10106]: segfault at 0 ip (null) sp 00007fff5692f1a8 error 14 in nvclock_gtk[400000+66000]
usb 3-4: new high-speed USB device number 3 using ehci-pci
usb 3-4: New USB device found, idVendor=04e8, idProduct=6860
usb 3-4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-4: Product: Android
usb 3-4: Manufacturer: Android
usb 3-4: SerialNumber: 13322912
cdc_acm 3-4:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 3-4:1.1: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
traps: gnome-mplayer[12155] general protection ip:7f4c4111a038 sp:7fff12570860 error:0 in libgobject-2.0.so.0.3600.0[7f4c410e8000+4d000]
usb 3-4: USB disconnect, device number 3
usb 3-4: new high-speed USB device number 4 using ehci-pci
usb 3-4: New USB device found, idVendor=04e8, idProduct=681d
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: SAMSUNG_Android
usb 3-4: Manufacturer: SAMSUNG
usb 3-4: SerialNumber: I897be2273c9
scsi11 : usb-storage 3-4:1.0
usb 3-4: reset high-speed USB device number 4 using ehci-pci
scsi 11:0:0:0: Direct-Access Android SGH-I897 0001 PQ: 0 ANSI: 2
sd 11:0:0:0: Attached scsi generic sg9 type 0
sd 11:0:0:0: [sdi] Attached SCSI removable disk
usb 3-4: USB disconnect, device number 4
UDF-fs: Partition marked readonly; forcing readonly mount
UDF-fs: INFO Mounting volume 'Repair disc Windows 7 64-bit', timestamp 2013/04/08 15:12 (1ed4)
device eth0 left promiscuous mode
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
vboxnetflt: dropped 0 out of 787516 packets
usb 3-4: new high-speed USB device number 5 using ehci-pci
usb 3-4: New USB device found, idVendor=04e8, idProduct=6860
usb 3-4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-4: Product: Android
usb 3-4: Manufacturer: Android
usb 3-4: SerialNumber: 13322912
cdc_acm 3-4:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 3-4:1.1: ttyACM0: USB ACM device
created IOMMU domain ffff8800c25e4d80
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
device eth0 entered promiscuous mode