dmesg - 64bit
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-MA770-DS3/GA-MA770-DS3, BIOS F6 06/24/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00C0000000 mask FFF0000000 write-back
3 base 00CFF00000 mask FFFFF00000 uncachable
4 base 0100000000 mask FFE0000000 write-back
5 base 0120000000 mask FFF0000000 write-back
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f4fb0] f4fb0
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cfee0000
0000000000 - 00cfe00000 page 2M
00cfe00000 - 00cfee0000 page 4k
kernel direct mapping tables up to cfee0000 @ 1fffa000-20000000
init_memory_mapping: 0000000100000000-0000000130000000
0100000000 - 0130000000 page 2M
kernel direct mapping tables up to 130000000 @ cfeda000-cfee0000
RAMDISK: 366dc000 - 37366000
ACPI: RSDP 00000000000f6970 00014 (v00 GBT )
ACPI: RSDT 00000000cfee3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfee30c0 06299 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfee0000 00040
ACPI: SSDT 00000000cfee9440 00350 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET 00000000cfee97c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfee9800 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 00000000cfee9380 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000130000000
Initmem setup node 0 0000000000000000-0000000130000000
NODE_DATA [000000012fffb000 - 000000012fffffff]
[ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012be00000-ffff88012f7fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000cfee0
0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1048175
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3921 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833304 pages, LIFO batch:31
Normal zone: 2688 pages used for memmap
Normal zone: 193920 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff8800cfc00000 s84416 r8192 d22080 u524288
pcpu-alloc: s84416 r8192 d22080 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031145
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ f80a000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
Memory: 3974976k/4980736k available (5940k kernel code, 788036k absent, 217724k reserved, 5017k data, 956k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU-based detection of stalled CPUs is disabled.
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3114.450 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 6228.90 BogoMIPS (lpj=31144500)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
tseg: 00cff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
ACPI: Core revision 20110112
ftrace: allocating 24314 entries in 96 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Booting Node 0, Processors #1
Brought up 2 CPUs
Total of 2 processors activated (12457.28 BogoMIPS).
devtmpfs: initialized
print_constraints: dummy:
Time: 13:38:21 Date: 04/18/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
node 0 link 0: io port [c000, ffff]
TOM: 00000000d0000000 aka 3328M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, fe02ffff]
node 0 link 0: mmio [e0000000, efffffff]
TOM2: 0000000130000000 aka 4864M
bus: [00, 03] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xd0000000-0xffffffff]
bus: 00 index 3 [mem 0x130000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:12.0: [1002:4380] type 0 class 0x000101
pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: set SATA to AHCI mode
pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:13.5: supports D1 D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: PME# disabled
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
pci 0000:01:00.0: [1002:9442] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfdfe0000-0xfdfeffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xde00-0xdeff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa30] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [io 0xee00-0xeeff]
pci 0000:02:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:03:06.0: [1131:7134] type 0 class 0x000480
pci 0000:03:06.0: reg 10: [mem 0xfdcff000-0xfdcff3ff]
pci 0000:03:06.0: supports D1 D2
pci 0000:03:07.0: [10ec:8139] type 0 class 0x000200
pci 0000:03:07.0: reg 10: [io 0xce00-0xceff]
pci 0000:03:07.0: reg 14: [mem 0xfdcfe000-0xfdcfe0ff]
pci 0000:03:07.0: supports D1 D2
pci 0000:03:07.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:07.0: PME# disabled
pci 0000:03:0e.0: [104c:8024] type 0 class 0x000c00
pci 0000:03:0e.0: reg 10: [mem 0xfdcfd000-0xfdcfd7ff]
pci 0000:03:0e.0: reg 14: [mem 0xfdcf8000-0xfdcfbfff]
pci 0000:03:0e.0: supports D1 D2
pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:0e.0: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
wmi: Mapper loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xd0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0022-0x003f]
pnp 00:01: [io 0x0044-0x005f]
pnp 00:01: [io 0x0062-0x0063]
pnp 00:01: [io 0x0065-0x006f]
pnp 00:01: [io 0x0074-0x007f]
pnp 00:01: [io 0x0091-0x0093]
pnp 00:01: [io 0x00a2-0x00bf]
pnp 00:01: [io 0x00e0-0x00ef]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0220-0x0225]
pnp 00:01: [io 0x0290-0x0294]
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0220-0x0225] has been reserved
system 00:01: [io 0x0290-0x0294] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x4100-0x411f]
pnp 00:02: [io 0x0228-0x022f]
pnp 00:02: [io 0x040b]
pnp 00:02: [io 0x04d6]
pnp 00:02: [io 0x0c00-0x0c01]
pnp 00:02: [io 0x0c14]
pnp 00:02: [io 0x0c50-0x0c52]
pnp 00:02: [io 0x0c6c-0x0c6d]
pnp 00:02: [io 0x0c6f]
pnp 00:02: [io 0x0cd0-0x0cd1]
pnp 00:02: [io 0x0cd2-0x0cd3]
pnp 00:02: [io 0x0cd4-0x0cdf]
pnp 00:02: [io 0x4000-0x40fe]
pnp 00:02: [io 0x4210-0x4217]
pnp 00:02: [io 0x0b00-0x0b1f]
pnp 00:02: [io 0x0070-0x0073]
pnp 00:02: [io 0x0238-0x023f]
pnp 00:02: [mem 0x00000000-0x00000fff window]
pnp 00:02: [mem 0xfee00400-0xfee00fff window]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:02: [io 0x4100-0x411f] has been reserved
system 00:02: [io 0x0228-0x022f] has been reserved
system 00:02: [io 0x040b] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c52] has been reserved
system 00:02: [io 0x0c6c-0x0c6d] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cd1] has been reserved
system 00:02: [io 0x0cd2-0x0cd3] has been reserved
system 00:02: [io 0x0cd4-0x0cdf] has been reserved
system 00:02: [io 0x4000-0x40fe] has been reserved
system 00:02: [io 0x4210-0x4217] has been reserved
system 00:02: [io 0x0b00-0x0b1f] could not be reserved
system 00:02: [io 0x0238-0x023f] has been reserved
system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0080-0x0090]
pnp 00:03: [io 0x0094-0x009f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io 0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io 0x0378-0x037f]
pnp 00:09: [irq 7]
pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:0a: [mem 0xe0000000-0xefffffff]
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x000f0000-0x000f3fff]
pnp 00:0b: [mem 0x000f4000-0x000f7fff]
pnp 00:0b: [mem 0x000f8000-0x000fbfff]
pnp 00:0b: [mem 0x000fc000-0x000fffff]
pnp 00:0b: [mem 0xcfee0000-0xcfefffff]
pnp 00:0b: [mem 0xffff0000-0xffffffff]
pnp 00:0b: [mem 0x00000000-0x0009ffff]
pnp 00:0b: [mem 0x00100000-0xcfedffff]
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfee00000-0xfee00fff]
pnp 00:0b: [mem 0xfff80000-0xfffeffff]
pnp 00:0b: disabling [mem 0x000f0000-0x000f3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0b: disabling [mem 0x000f4000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0b: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0b: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0b: disabling [mem 0x00100000-0xcfedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:0b: [mem 0xcfee0000-0xcfefffff] could not be reserved
system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03-03]
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref]
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:0a.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
Freeing initrd memory: 12840k freed
pci 0000:00:13.1: OHCI: BIOS handoff failed (BIOS bug?) 00000184
pci 0000:01:00.0: Boot video device
PCI: CLS 4 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1366292302.500:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.16)
msgmni has been set to 7917
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0a.0: setting latency timer to 64
pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ERST: Table is not found!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
i2c-core: driver [adp5520] using legacy suspend method
i2c-core: driver [adp5520] using legacy resume method
pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.2.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0x17 (3100 MHz), vid 0x5
powernow-k8: 1 : fid 0x16 (3000 MHz), vid 0x6
powernow-k8: 2 : fid 0x14 (2800 MHz), vid 0x8
powernow-k8: 3 : fid 0x12 (2600 MHz), vid 0xa
powernow-k8: 4 : fid 0x10 (2400 MHz), vid 0xc
powernow-k8: 5 : fid 0xe (2200 MHz), vid 0xe
powernow-k8: 6 : fid 0xc (2000 MHz), vid 0x10
powernow-k8: 7 : fid 0xa (1800 MHz), vid 0x10
powernow-k8: 8 : fid 0x2 (1000 MHz), vid 0x12
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 9:299:635
rtc_cmos 00:05: setting system clock to 2013-04-18 13:38:23 UTC (1366292303)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 956k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 184k freed
Freeing unused kernel memory: 1444k freed
udev[98]: starting version 167
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 42 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc9000066c000, 00:1f:d0:40:cb:84, XID 18000000 IRQ 42
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:03:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
8139too 0000:03:07.0: eth1: RealTek RTL8139 at 0xce00, 00:0e:2e:e3:b7:6f, IRQ 21
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
usb 1-6: new high speed USB device using ehci_hcd and address 5
ata1.00: HPA detected: current 312579695, native 312581808
ata1.00: ATA-6: ST3160023A, 3.06, max UDMA/100
ata1.00: 312579695 sectors, multi 16: LBA48
usbcore: registered new interface driver uas
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST3160023A 3.06 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda2 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: softreset failed (device not ready)
ata5: applying SB600 PMP SRST workaround and retrying
usb 2-2: new full speed USB device using ohci_hcd and address 2
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.00, max UDMA/100
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
Initializing USB Mass Storage driver...
firewire_ohci 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
scsi6 : usb-storage 1-6:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input2
generic-usb 0003:09DA:0080.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Mouse] on usb-0000:00:13.0-2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
firewire_ohci: Added fw-ohci device 0000:03:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
usb 3-2: new low speed USB device using ohci_hcd and address 2
firewire_core: created device fw0: GUID 0065255700001d7d, S400
input: KYE 4D device Ergomedia as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input3
generic-usb 0003:05D5:8001.0002: input,hidraw1: USB HID v1.10 Keyboard [KYE 4D device Ergomedia] on usb-0000:00:13.1-2/input0
input: KYE 4D device Ergomedia as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.1/input/input4
generic-usb 0003:05D5:8001.0003: input,hidraw2: USB HID v1.10 Device [KYE 4D device Ergomedia] on usb-0000:00:13.1-2/input1
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
usb 4-1: new full speed USB device using ohci_hcd and address 2
scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
scsi 6:0:0:4: Direct-Access Generic Mini SD Reader 1.06 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:1: Attached scsi generic sg3 type 0
sd 6:0:0:2: Attached scsi generic sg4 type 0
sd 6:0:0:3: Attached scsi generic sg5 type 0
sd 6:0:0:4: Attached scsi generic sg6 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:1: [sdc] Attached SCSI removable disk
sd 6:0:0:2: [sdd] Attached SCSI removable disk
sd 6:0:0:3: [sde] Attached SCSI removable disk
sd 6:0:0:4: [sdf] Attached SCSI removable disk
generic-usb 0003:051D:0002.0004: hiddev0,hidraw3: USB HID v1.00 Device [American Power Conversion Back-UPS RS 900G FW:879.L4 .I USB FW:L4 ] on usb-0000:00:13.2-1/input0
Adding 1571836k swap on /dev/sda7. Priority:-1 extents:1 across:1571836k
udev[429]: starting version 167
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,user_xattr
type=1400 audit(1366292309.410:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=613 comm="apparmor_parser"
type=1400 audit(1366292309.410:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=589 comm="apparmor_parser"
type=1400 audit(1366292309.410:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=613 comm="apparmor_parser"
type=1400 audit(1366292309.410:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=589 comm="apparmor_parser"
type=1400 audit(1366292309.410:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=613 comm="apparmor_parser"
type=1400 audit(1366292309.410:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=589 comm="apparmor_parser"
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0 Apr 11 2011
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[fglrx] Maximum main memory to use for locked dma buffers: 3799 MBytes.
[fglrx] vendor: 1002 device: 9442 count: 1
[fglrx] ioport: bar 4, base 0xde00, size: 0x100
pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors
EDAC amd64_edac: v3.3.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
lp: driver loaded but no devices found
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xfec000f0 already in use
Linux video capture interface: v2.00
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
lp0: using parport0 (interrupt-driven).
saa7130/34: v4l2 driver version 0.2.16 loaded
saa7134 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
saa7134[0]: found at 0000:03:06.0, rev: 1, irq: 20, latency: 32, mmio: 0xfdcff000
saa7134[0]: subsystem: 185b:c200, board: Compro VideoMate Gold+ Pal [card=49,autodetected]
saa7134[0]: board init: gpio is cc003f
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
Registered IR keymap rc-videomate-tv-pvr
input: saa7134 IR (Compro VideoMate Go as /devices/pci0000:00/0000:00:14.4/0000:03:06.0/rc/rc0/input5
rc0: saa7134 IR (Compro VideoMate Go as /devices/pci0000:00/0000:00:14.4/0000:03:06.0/rc/rc0
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
saa7134[0]: i2c eeprom 00: 5b 18 00 c2 ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff 01 01 ff 01 ff 00 07 34 23 cb
saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
lirc_dev: IR Remote Control driver registered, major 248
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
IR LIRC bridge handler initialized
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tuner 0-0060: chip found @ 0xc0 (saa7134[0])
tea5767 0-0060: type set to Philips TEA5767HN FM Radio
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
saa7134 ALSA driver for DMA sound loaded
saa7134[0]/alsa: saa7134[0] at 0xfdcff000 irq 20 registered as card -2
HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
HDA Intel 0000:01:00.1: irq 43 for MSI/MSI-X
HDA Intel 0000:01:00.1: setting latency timer to 64
type=1400 audit(1366292314.710:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=955 comm="apparmor_parser"
type=1400 audit(1366292314.710:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=955 comm="apparmor_parser"
type=1400 audit(1366292314.710:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=955 comm="apparmor_parser"
type=1400 audit(1366292314.730:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=954 comm="apparmor_parser"
type=1400 audit(1366292314.800:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=958 comm="apparmor_parser"
type=1400 audit(1366292314.800:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=958 comm="apparmor_parser"
type=1400 audit(1366292314.940:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=956 comm="apparmor_parser"
type=1400 audit(1366292314.950:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=956 comm="apparmor_parser"
type=1400 audit(1366292314.950:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=956 comm="apparmor_parser"
type=1400 audit(1366292315.190:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=959 comm="apparmor_parser"
r8169 0000:02:00.0: eth0: link down
r8169 0000:02:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth1: link down
ADDRCONF(NETDEV_UP): eth1: link is not ready
r8169 0000:02:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fglrx_pci 0000:01:00.0: irq 44 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1362
[fglrx] Firegl kernel thread PID: 1363
[fglrx] Firegl kernel thread PID: 1364
[fglrx] IRQ 44 Enabled
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[fglrx] Gart USWC size:1240 M.
[fglrx] Gart cacheable size:491 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
[fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.
eth0: no IPv6 routers present