dmesg - huh
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-5-amd64 (Debian 2.6.32-48squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Feb 25 00:26:11 UTC 2013
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
BIOS-e820: 0000000040005000 - 00000000ccb1c000 (usable)
BIOS-e820: 00000000ccb1c000 - 00000000cd82a000 (reserved)
BIOS-e820: 00000000cd82a000 - 00000000cd8b5000 (usable)
BIOS-e820: 00000000cd8b5000 - 00000000cd95a000 (ACPI NVS)
BIOS-e820: 00000000cd95a000 - 00000000ce164000 (reserved)
BIOS-e820: 00000000ce164000 - 00000000ce165000 (usable)
BIOS-e820: 00000000ce165000 - 00000000ce1a8000 (ACPI NVS)
BIOS-e820: 00000000ce1a8000 - 00000000cebed000 (usable)
BIOS-e820: 00000000cebed000 - 00000000ceff2000 (reserved)
BIOS-e820: 00000000ceff2000 - 00000000cf000000 (usable)
BIOS-e820: 00000000cf800000 - 00000000dfa00000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000081f600000 (usable)
DMI 2.7 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x81f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 800000000 write-back
1 base 800000000 mask FE0000000 write-back
2 base 0E0000000 mask FE0000000 uncachable
3 base 0D0000000 mask FF0000000 uncachable
4 base 0CF800000 mask FFF800000 uncachable
5 base 81F800000 mask FFF800000 uncachable
6 base 81F600000 mask FFFE00000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000cf800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcf000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cf000000
0000000000 - 00cf000000 page 2M
kernel direct mapping tables up to cf000000 @ 10000-15000
init_memory_mapping: 0000000100000000-000000081f600000
0100000000 - 081f600000 page 2M
kernel direct mapping tables up to 81f600000 @ 13000-35000
RAMDISK: 1758e000 - 1803f4c6
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000cd93d078 00074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000cd947518 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 (20090903/tbfadt-288)
ACPI: DSDT 00000000cd93d188 0A38E (v02 ALASKA A M I 00000022 INTL 20051117)
ACPI: FACS 00000000cd958080 00040
ACPI: APIC 00000000cd947628 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000cd9476c0 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000cd947708 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 00000000cd947748 007E1 (v01 Intel_ AoacTabl 00001000 INTL 20091112)
ACPI: AAFT 00000000cd947f30 00112 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 00000000cd948048 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000cd948080 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000cd9483f0 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000cd948da0 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000081f600000
Bootmem setup node 0 0000000000000000-000000081f600000
NODE_DATA [0000000000030000 - 0000000000037fff]
bootmap [0000000000100000 - 0000000000203ebf] pages 104
(8 early reservations) ==> bootmem [0000000000 - 081f600000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 00016db584] TEXT DATA BSS ==> [0001000000 - 00016db584]
#3 [001758e000 - 001803f4c6] RAMDISK ==> [001758e000 - 001803f4c6]
#4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000]
#5 [00016dc000 - 00016dc184] BRK ==> [00016dc000 - 00016dc184]
#6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
#7 [0000013000 - 0000030000] PGTABLE ==> [0000013000 - 0000030000]
found SMP MP-table at [ffff8800000fda10] fda10
[ffffea0000000000-ffffea00165fffff] PMD -> [ffff880001800000-ffff8800173fffff] on node 0
[ffffea0016600000-ffffea001c7fffff] PMD -> [ffff880018200000-ffff88001e3fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0081f600
Movable zone start PFN for each node
early_node_map[9] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x00020000
0: 0x00020200 -> 0x00040004
0: 0x00040005 -> 0x000ccb1c
0: 0x000cd82a -> 0x000cd8b5
0: 0x000ce164 -> 0x000ce165
0: 0x000ce1a8 -> 0x000cebed
0: 0x000ceff2 -> 0x000cf000
0: 0x00100000 -> 0x0081f600
On node 0 totalpages: 8309127
DMA zone: 56 pages used for memmap
DMA zone: 133 pages reserved
DMA zone: 3792 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 822322 pages, LIFO batch:31
Normal zone: 102109 pages used for memmap
Normal zone: 7366435 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040004000 - 0000000040005000
PM: Registered nosave memory: 00000000ccb1c000 - 00000000cd82a000
PM: Registered nosave memory: 00000000cd8b5000 - 00000000cd95a000
PM: Registered nosave memory: 00000000cd95a000 - 00000000ce164000
PM: Registered nosave memory: 00000000ce165000 - 00000000ce1a8000
PM: Registered nosave memory: 00000000cebed000 - 00000000ceff2000
PM: Registered nosave memory: 00000000cf000000 - 00000000cf800000
PM: Registered nosave memory: 00000000cf800000 - 00000000dfa00000
PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff88001e600000 s90392 r8192 d24296 u262144
pcpu-alloc: s90392 r8192 d24296 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8192549
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020200000 - ffff880024200000
software IO TLB at phys 0x20200000 - 0x24200000
Memory: 32694356k/34068480k available (3087k kernel code, 831972k absent, 542152k reserved, 2053k data, 592k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3500.479 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.95 BogoMIPS (lpj=14001916)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 0/0x0 -> Node 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20090903
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz stepping 09
Booting processor 1 APIC 0x2 ip 0x6000
Initializing CPU#1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 1/0x2 -> Node 0
CPU1: Thermal monitoring enabled (TM1)
CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
CPU1: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz stepping 09
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x4 ip 0x6000
Initializing CPU#2
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 2/0x4 -> Node 0
CPU2: Thermal monitoring enabled (TM1)
CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
CPU2: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz stepping 09
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x6 ip 0x6000
Initializing CPU#3
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 3/0x6 -> Node 0
CPU3: Thermal monitoring enabled (TM1)
CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
CPU3: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz stepping 09
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Booting processor 4 APIC 0x1 ip 0x6000
Initializing CPU#4
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 4/0x1 -> Node 0
CPU4: Thermal monitoring enabled (TM1)
CPU 4 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8
CPU4: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz stepping 09
checking TSC synchronization [CPU#0 -> CPU#4]: passed.
Booting processor 5 APIC 0x3 ip 0x6000
Initializing CPU#5
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 5/0x3 -> Node 0
CPU5: Thermal monitoring enabled (TM1)
CPU 5 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8
CPU5: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz stepping 09
checking TSC synchronization [CPU#0 -> CPU#5]: passed.
Booting processor 6 APIC 0x5 ip 0x6000
Initializing CPU#6
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 6/0x5 -> Node 0
CPU6: Thermal monitoring enabled (TM1)
CPU 6 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8
CPU6: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz stepping 09
checking TSC synchronization [CPU#0 -> CPU#6]: passed.
Booting processor 7 APIC 0x7 ip 0x6000
Initializing CPU#7
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 7/0x7 -> Node 0
CPU7: Thermal monitoring enabled (TM1)
CPU 7 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8
CPU7: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz stepping 09
checking TSC synchronization [CPU#0 -> CPU#7]: passed.
Brought up 8 CPUs
Total of 8 processors activated (55999.30 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0,4 level SIBLING
groups: group ffff88001e60fae0 cpus 0 (cpu_power = 589) group ffff88001e70fae0 cpus 4 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: group ffff88001e60fbf0 cpus 0,4 (cpu_power = 1178) group ffff88001e64fbf0 cpus 1,5 (cpu_power = 1178) group ffff88001e68fbf0 cpus 2,6 (cpu_power = 1178) group ffff88001e6cfbf0 cpus 3,7 (cpu_power = 1178)
CPU1 attaching sched-domain:
domain 0: span 1,5 level SIBLING
groups: group ffff88001e64fae0 cpus 1 (cpu_power = 589) group ffff88001e74fae0 cpus 5 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: group ffff88001e64fbf0 cpus 1,5 (cpu_power = 1178) group ffff88001e68fbf0 cpus 2,6 (cpu_power = 1178) group ffff88001e6cfbf0 cpus 3,7 (cpu_power = 1178) group ffff88001e60fbf0 cpus 0,4 (cpu_power = 1178)
CPU2 attaching sched-domain:
domain 0: span 2,6 level SIBLING
groups: group ffff88001e68fae0 cpus 2 (cpu_power = 589) group ffff88001e78fae0 cpus 6 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: group ffff88001e68fbf0 cpus 2,6 (cpu_power = 1178) group ffff88001e6cfbf0 cpus 3,7 (cpu_power = 1178) group ffff88001e60fbf0 cpus 0,4 (cpu_power = 1178) group ffff88001e64fbf0 cpus 1,5 (cpu_power = 1178)
CPU3 attaching sched-domain:
domain 0: span 3,7 level SIBLING
groups: group ffff88001e6cfae0 cpus 3 (cpu_power = 589) group ffff88001e7cfae0 cpus 7 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: group ffff88001e6cfbf0 cpus 3,7 (cpu_power = 1178) group ffff88001e60fbf0 cpus 0,4 (cpu_power = 1178) group ffff88001e64fbf0 cpus 1,5 (cpu_power = 1178) group ffff88001e68fbf0 cpus 2,6 (cpu_power = 1178)
CPU4 attaching sched-domain:
domain 0: span 0,4 level SIBLING
groups: group ffff88001e70fae0 cpus 4 (cpu_power = 589) group ffff88001e60fae0 cpus 0 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: group ffff88001e60fbf0 cpus 0,4 (cpu_power = 1178) group ffff88001e64fbf0 cpus 1,5 (cpu_power = 1178) group ffff88001e68fbf0 cpus 2,6 (cpu_power = 1178) group ffff88001e6cfbf0 cpus 3,7 (cpu_power = 1178)
CPU5 attaching sched-domain:
domain 0: span 1,5 level SIBLING
groups: group ffff88001e74fae0 cpus 5 (cpu_power = 589) group ffff88001e64fae0 cpus 1 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: group ffff88001e64fbf0 cpus 1,5 (cpu_power = 1178) group ffff88001e68fbf0 cpus 2,6 (cpu_power = 1178) group ffff88001e6cfbf0 cpus 3,7 (cpu_power = 1178) group ffff88001e60fbf0 cpus 0,4 (cpu_power = 1178)
CPU6 attaching sched-domain:
domain 0: span 2,6 level SIBLING
groups: group ffff88001e78fae0 cpus 6 (cpu_power = 589) group ffff88001e68fae0 cpus 2 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: group ffff88001e68fbf0 cpus 2,6 (cpu_power = 1178) group ffff88001e6cfbf0 cpus 3,7 (cpu_power = 1178) group ffff88001e60fbf0 cpus 0,4 (cpu_power = 1178) group ffff88001e64fbf0 cpus 1,5 (cpu_power = 1178)
CPU7 attaching sched-domain:
domain 0: span 3,7 level SIBLING
groups: group ffff88001e7cfae0 cpus 7 (cpu_power = 589) group ffff88001e6cfae0 cpus 3 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: group ffff88001e6cfbf0 cpus 3,7 (cpu_power = 1178) group ffff88001e60fbf0 cpus 0,4 (cpu_power = 1178) group ffff88001e64fbf0 cpus 1,5 (cpu_power = 1178) group ffff88001e68fbf0 cpus 2,6 (cpu_power = 1178)
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xf7400000-0xf77fffff]
pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:00:02.0: reg 20 io port: [0xf000-0xf03f]
pci 0000:00:14.0: reg 10 64bit mmio: [0xf7c00000-0xf7c0ffff]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:16.0: reg 10 64bit mmio: [0xf7c1a000-0xf7c1a00f]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xf7c18000-0xf7c183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7c10000-0xf7c13fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xf7c17000-0xf7c173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 14 io port: [0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 18 io port: [0xf090-0xf097]
pci 0000:00:1f.2: reg 1c io port: [0xf080-0xf083]
pci 0000:00:1f.2: reg 20 io port: [0xf060-0xf07f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7c16000-0xf7c167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7c15000-0xf7c150ff]
pci 0000:00:1f.3: reg 20 io port: [0xf040-0xf05f]
pci 0000:02:00.0: reg 10 io port: [0xe050-0xe057]
pci 0000:02:00.0: reg 14 io port: [0xe040-0xe043]
pci 0000:02:00.0: reg 18 io port: [0xe030-0xe037]
pci 0000:02:00.0: reg 1c io port: [0xe020-0xe023]
pci 0000:02:00.0: reg 20 io port: [0xe000-0xe01f]
pci 0000:02:00.0: reg 24 32bit mmio: [0xf7b00000-0xf7b001ff]
pci 0000:00:1c.4: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xf7b00000-0xf7bfffff]
pci 0000:03:00.0: reg 10 64bit mmio pref: [0xf0010000-0xf001ffff]
pci 0000:03:00.0: reg 18 64bit mmio pref: [0xf0000000-0xf000ffff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0xf7a00000-0xf7a007ff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.5: bridge 32bit mmio: [0xf7a00000-0xf7afffff]
pci 0000:00:1c.5: bridge 64bit mmio pref: [0xf0000000-0xf00fffff]
pci 0000:04:00.0: reg 10 64bit mmio: [0xf7900000-0xf7907fff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.6: bridge 32bit mmio: [0xf7900000-0xf79fffff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.7: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.7: bridge 32bit mmio: [0xf7800000-0xf78fffff]
pci 0000:06:01.0: supports D1 D2
pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:01.0: PME# disabled
pci 0000:06:02.0: supports D1 D2
pci 0000:06:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:02.0: PME# disabled
pci 0000:06:03.0: supports D1 D2
pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:03.0: PME# disabled
pci 0000:05:00.0: bridge io port: [0xd000-0xdfff]
pci 0000:05:00.0: bridge 32bit mmio: [0xf7800000-0xf78fffff]
pci 0000:06:03.0: bridge io port: [0xd000-0xdfff]
pci 0000:06:03.0: bridge 32bit mmio: [0xf7800000-0xf78fffff]
pci 0000:0a:02.0: reg 10 32bit mmio: [0xf7800000-0xf78007ff]
pci 0000:0a:02.0: reg 14 io port: [0xd000-0xd07f]
pci 0000:0a:02.0: supports D2
pci 0000:0a:02.0: PME# supported from D2 D3hot D3cold
pci 0000:0a:02.0: PME# disabled
pci 0000:09:00.0: transparent bridge
pci 0000:09:00.0: bridge io port: [0xd000-0xdfff]
pci 0000:09:00.0: bridge 32bit mmio: [0xf7800000-0xf78fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08.BR21._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08.BR21.BR31._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08.BR21.BR32._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08.BR21.BR33._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08.BR21.BR33.BR40._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:05: ioport range 0x680-0x69f has been reserved
system 00:05: ioport range 0x1000-0x100f has been reserved
system 00:05: ioport range 0xffff-0xffff has been reserved
system 00:05: ioport range 0xffff-0xffff has been reserved
system 00:05: ioport range 0x400-0x453 has been reserved
system 00:05: ioport range 0x458-0x47f has been reserved
system 00:05: ioport range 0x500-0x57f has been reserved
system 00:05: ioport range 0x164e-0x164f has been reserved
system 00:07: ioport range 0x454-0x457 has been reserved
system 00:08: ioport range 0x290-0x29f has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:0d: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:0d: iomem range 0xfed10000-0xfed17fff has been reserved
system 00:0d: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:0d: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0d: iomem range 0xfed90000-0xfed93fff has been reserved
system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:0d: iomem range 0xff000000-0xffffffff has been reserved
system 00:0d: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0d: iomem range 0xdfa00000-0xdfa00fff has been reserved
system 00:0e: iomem range 0x20000000-0x201fffff has been reserved
system 00:0e: iomem range 0x40004000-0x40004fff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.4: IO window: 0xe000-0xefff
pci 0000:00:1c.4: MEM window: 0xf7b00000-0xf7bfffff
pci 0000:00:1c.4: PREFETCH window: disabled
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.5: IO window: disabled
pci 0000:00:1c.5: MEM window: 0xf7a00000-0xf7afffff
pci 0000:00:1c.5: PREFETCH window: 0x000000f0000000-0x000000f00fffff
pci 0000:00:1c.6: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.6: IO window: disabled
pci 0000:00:1c.6: MEM window: 0xf7900000-0xf79fffff
pci 0000:00:1c.6: PREFETCH window: disabled
pci 0000:06:01.0: BAR 14: can't allocate mem resource [0xf7900000-0xf78fffff]
pci 0000:06:01.0: BAR 13: can't allocate I/O resource [0xe000-0xdfff]
pci 0000:06:01.0: PCI bridge, secondary bus 0000:07
pci 0000:06:01.0: IO window: disabled
pci 0000:06:01.0: MEM window: disabled
pci 0000:06:01.0: PREFETCH window: 0x000000dfb00000-0x000000dfcfffff
pci 0000:06:02.0: PCI bridge, secondary bus 0000:08
pci 0000:06:02.0: IO window: disabled
pci 0000:06:02.0: MEM window: disabled
pci 0000:06:02.0: PREFETCH window: disabled
pci 0000:09:00.0: PCI bridge, secondary bus 0000:0a
pci 0000:09:00.0: IO window: 0xd000-0xdfff
pci 0000:09:00.0: MEM window: 0xf7800000-0xf78fffff
pci 0000:09:00.0: PREFETCH window: disabled
pci 0000:06:03.0: PCI bridge, secondary bus 0000:09
pci 0000:06:03.0: IO window: 0xd000-0xdfff
pci 0000:06:03.0: MEM window: 0xf7800000-0xf78fffff
pci 0000:06:03.0: PREFETCH window: disabled
pci 0000:05:00.0: PCI bridge, secondary bus 0000:06
pci 0000:05:00.0: IO window: 0xd000-0xdfff
pci 0000:05:00.0: MEM window: 0xf7800000-0xf78fffff
pci 0000:05:00.0: PREFETCH window: 0x000000dfb00000-0x000000dfcfffff
pci 0000:00:1c.7: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.7: IO window: 0xd000-0xdfff
pci 0000:00:1c.7: MEM window: 0xf7800000-0xf78fffff
pci 0000:00:1c.7: PREFETCH window: 0x000000dfb00000-0x000000dfcfffff
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:05:00.0: setting latency timer to 64
pci 0000:06:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:06:01.0: setting latency timer to 64
pci 0000:06:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:06:02.0: setting latency timer to 64
pci 0000:06:03.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:06:03.0: setting latency timer to 64
pci 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:09:00.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
pci_bus 0000:02: resource 1 mem: [0xf7b00000-0xf7bfffff]
pci_bus 0000:03: resource 1 mem: [0xf7a00000-0xf7afffff]
pci_bus 0000:03: resource 2 pref mem [0xf0000000-0xf00fffff]
pci_bus 0000:04: resource 1 mem: [0xf7900000-0xf79fffff]
pci_bus 0000:05: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:05: resource 1 mem: [0xf7800000-0xf78fffff]
pci_bus 0000:05: resource 2 pref mem [0xdfb00000-0xdfcfffff]
pci_bus 0000:06: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:06: resource 1 mem: [0xf7800000-0xf78fffff]
pci_bus 0000:06: resource 2 pref mem [0xdfb00000-0xdfcfffff]
pci_bus 0000:07: resource 2 pref mem [0xdfb00000-0xdfcfffff]
pci_bus 0000:09: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:09: resource 1 mem: [0xf7800000-0xf78fffff]
pci_bus 0000:0a: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:0a: resource 1 mem: [0xf7800000-0xf78fffff]
pci_bus 0000:0a: resource 3 io: [0xd000-0xdfff]
pci_bus 0000:0a: resource 4 mem: [0xf7800000-0xf78fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:14.0: PCI INT A disabled
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:04:00.0: PCI INT A disabled
Unpacking initramfs...
Freeing initrd memory: 10949k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1366329868.928:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.6: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.7: irq 28 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
pcieport 0000:05:00.0: irq 29 for MSI/MSI-X
pcieport 0000:05:00.0: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
pcieport 0000:06:01.0: irq 30 for MSI/MSI-X
pcieport 0000:06:01.0: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
pcieport 0000:06:02.0: irq 31 for MSI/MSI-X
pcieport 0000:06:02.0: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
pcieport 0000:06:03.0: irq 32 for MSI/MSI-X
pcieport 0000:06:03.0: setting latency timer to 64
Linux agpgart interface v0.103
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2013-04-19 00:04:29 UTC (1366329869)
Initalizing network drop monitor service
Freeing unused kernel memory: 592k freed
Write protecting the kernel read-only data: 4252k
udev[116]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 32 is not supported
xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7c00000
usb usb1: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb1: New USB device found, idVendor=1d6b, idProduct=0003
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
usb usb1: SerialNumber: 0000:00:14.0
usb usb1: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
xhci_hcd 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
xhci_hcd 0000:04:00.0: setting latency timer to 64
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:04:00.0: irq 18, io mem 0xf7900000
usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:04:00.0
usb usb2: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
libata version 3.00 loaded.
tg3.c:v3.116 (December 3, 2010)
tg3 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:03:00.0: setting latency timer to 64
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1a.0: debug port 2
firewire_ohci 0000:0a:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7c18000
tg3 0000:03:00.0: eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:9b:e3:c1
tg3 0000:03:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1])
tg3 0000:03:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:03:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 33 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16100 irq 33
ata2: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16180 irq 33
ata3: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16200 irq 33
ata4: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16280 irq 33
ata5: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16300 irq 33
ata6: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16380 irq 33
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.0: debug port 2
ahci 0000:02:00.0: irq 34 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
ahci 0000:02:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xf7b00000 port 0xf7b00100 irq 34
ata8: SATA max UDMA/133 abar m512@0xf7b00000 port 0xf7b00180 irq 34
ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7c17000
firewire_ohci: Added fw-ohci device 0000:0a:02.0, OHCI version 1.10
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-1: new high speed USB device using ehci_hcd and address 2
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1.00: ACPI _SDD failed (AE 0x5)
ata2.00: ACPI _SDD failed (AE 0x5)
usb 3-1: New USB device found, idVendor=8087, idProduct=0024
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-1: configuration #1 chosen from 1 choice
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: ATAPI: Optiarc DVD RW AD-5280S, 1.Z7, max UDMA/100
ata7.00: configured for UDMA/100
usb 4-1: new high speed USB device using ehci_hcd and address 2
firewire_core: created device fw0: GUID 008f1300ac231400, S400
usb 4-1: New USB device found, idVendor=8087, idProduct=0024
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 4-1: configuration #1 chosen from 1 choice
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI _SDD failed (AE 0x5)
ata1.00: ACPI: failed the second time, disabled
ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM04B0Q, max UDMA/133
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ACPI _SDD failed (AE 0x5)
ata2.00: ACPI: failed the second time, disabled
ata1.00: configured for UDMA/133
ata2.00: ATA-8: ST2000DM001-1CH164, CC26, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC26 PQ: 0 ANSI: 5
scsi 6:0:0:0: CD-ROM Optiarc DVD RW AD-5280S 1.Z7 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sdb: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
ata8: SATA link down (SStatus 0 SControl 300)
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 6:0:0:0: Attached scsi generic sg2 type 5
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udev[446]: starting version 164
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: SSDT 00000000cd7d7018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: WMI: Mapper loaded
input: PC Speaker as /devices/platform/pcspkr/input/input4
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT 00000000cd7d8a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000cd7d9c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
Error: Driver 'pcspkr' is already registered, aborting...
Adding 62533624k swap on /dev/sda5. Priority:-1 extents:1 across:62533624k SS
EXT3 FS on sda1, internal journal
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
tg3 0000:03:00.0: irq 35 for MSI/MSI-X
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
tg3 0000:03:00.0: irq 36 for MSI/MSI-X
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
tg3 0000:03:00.0: irq 37 for MSI/MSI-X
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
tg3 0000:03:00.0: irq 38 for MSI/MSI-X
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
tg3 0000:03:00.0: irq 39 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present