dmesg - ironlake_3.9
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.9.0-rc6+ (root@debian) (gcc version 4.7.2 (Debian 4.7.2-5) ) #47 SMP Sun Apr 14 18:14:04 CLST 2013
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000157ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/144A, BIOS F.12 08/05/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x158000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-EFFFF write-through
F0000-FFFFF write-combining
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 0FFE00000 mask FFFE00000 write-protect
2 base 080000000 mask FE0000000 write-back
3 base 09C000000 mask FFC000000 uncachable
4 base 09B800000 mask FFF800000 uncachable
5 base 100000000 mask F80000000 write-back
6 base 158000000 mask FF8000000 uncachable
7 base 160000000 mask FE0000000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped: [mem 0x00000000-0x019fffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37600000-0x377fffff]
[mem 0x37600000-0x377fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x375fffff]
[mem 0x34000000-0x375fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37800000-0x379fdfff]
[mem 0x37800000-0x379fdfff] page 4k
BRK [0x01580000, 0x01580fff] PGTABLE
BRK [0x01581000, 0x01582fff] PGTABLE
RAMDISK: [mem 0x28f5a000-0x307a4fff]
ACPI: RSDP 000fe020 00024 (v02 HPQOEM)
ACPI: XSDT 9b7fe120 0007C (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 9b7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: DSDT 9b7ea000 0EBC7 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: FACS 9b75e000 00040
ACPI: ASF! 9b7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: HPET 9b7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: APIC 9b7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: MCFG 9b7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SLIC 9b7e9000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240)
ACPI: BOOT 9b7e6000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: ASPT 9b7e3000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: WDAT 9b7e2000 00224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT 9b7e1000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 9b7df000 01A46 (v01 AmdRef AmdTabl 00001000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000157ffffff]
Initmem setup node 0 [mem 0x00000000-0x157ffffff]
NODE_DATA [mem 0x379fc000-0x379fdfff]
4614MB HIGHMEM available.
889MB LOWMEM available.
max_low_pfn = 379fe, highstart_pfn = 379fe
Low memory ends at vaddr f79fe000
High memory starts at vaddr f79fe000
mapped low ram: 0 - 379fe000
low ram: 0 - 379fe000
BRK [0x01583000, 0x01583fff] PGTABLE
Node: 0, start_pfn: 1, end_pfn: 9d
Setting physnode_map array to node 0 for pfns:
1
Node: 0, start_pfn: 100, end_pfn: 9b63f
Setting physnode_map array to node 0 for pfns:
100 4100 8100 c100 10100 14100 18100 1c100 20100 24100 28100 2c100 30100 34100 38100 3c100 40100 44100 48100 4c100 50100 54100 58100 5c100 60100 64100 68100 6c100 70100 74100 78100 7c100 80100 84100 88100 8c100 90100 94100 98100
Node: 0, start_pfn: 9b7ff, end_pfn: 9b800
Setting physnode_map array to node 0 for pfns:
9b7ff
Node: 0, start_pfn: 100000, end_pfn: 158000
Setting physnode_map array to node 0 for pfns:
100000 104000 108000 10c000 110000 114000 118000 11c000 120000 124000 128000 12c000 130000 134000 138000 13c000 140000 144000 148000 14c000 150000 154000
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x379fdfff]
HighMem [mem 0x379fe000-0x57ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x9b63efff]
node 0: [mem 0x9b7ff000-0x9b7fffff]
node 0: [mem 0x00000000-0x57ffffff]
On node 0 totalpages: 996828
free_area_init_node: node 0, pgdat f79fc000, node_mem_map f4efc020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3996 pages, LIFO batch:0
Normal zone: 1748 pages used for memmap
Normal zone: 223742 pages, LIFO batch:31
HighMem zone: 9229 pages used for memmap
HighMem zone: 769090 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 6 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
e820: [mem 0xa0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f4e7a000 s34112 r0 d23232 u57344
pcpu-alloc: s34112 r0 d23232 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 995048
Policy zone: HighMem
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
Initializing HighMem for node 0 (000379fe:00158000)
Memory: 3813060k/5636096k available (3075k kernel code, 174252k reserved, 1513k data, 440k init, 3076360k highmem)
virtual kernel memory layout:
fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xc147c000 - 0xc14ea000 ( 440 kB)
.data : 0xc1300eb2 - 0xc147b600 (1513 kB)
.text : 0xc1000000 - 0xc1300eb2 (3075 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
NR_IRQS:2304 nr_irqs:744 16
CPU 0 irqstacks, hard=f4806000 soft=f4808000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1995.349 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.69 BogoMIPS (lpj=7981396)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 8k freed
ACPI: Core revision 20130117
ACPI: All ACPI Tables successfully acquired
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) CPU P6100 @ 2.00GHz (fam: 06, model: 25, stepping: 05)
APIC calibration not consistent with PM-Timer: 535ms instead of 100ms
APIC delta adjusted to PM-Timer: 831342 (4455948)
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
CPU 1 irqstacks, hard=f48e4000 soft=f48e6000
Initializing CPU#1
smpboot: Booting Node 0, Processors #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (7981.39 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 9b691c18 0036C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0036C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 9b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 9b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 9b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
_OSC request data:1 8 1f
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-7e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x5050-0x5057]
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xc4504000-0xc450400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xc450a000-0xc450a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xc4500000-0xc4503fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xc4509000-0xc45093ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x5048-0x504f]
pci 0000:00:1f.2: reg 14: [io 0x505c-0x505f]
pci 0000:00:1f.2: reg 18: [io 0x5040-0x5047]
pci 0000:00:1f.2: reg 1c: [io 0x5058-0x505b]
pci 0000:00:1f.2: reg 20: [io 0x5020-0x503f]
pci 0000:00:1f.2: reg 24: [mem 0xc4508000-0xc45087ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xc4506000-0xc45060ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
pci 0000:00:1f.6: reg 10: [mem 0xc4507000-0xc4507fff 64bit]
pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xc4400000-0xc441ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0x4000-0x40ff]
pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xc4420000-0xc4423fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:02:00.0: [14e4:4727] type 00 class 0x028000
pci 0000:02:00.0: reg 10: [mem 0xc3400000-0xc3403fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
pci 0000:03:00.0: reg 18: [mem 0xc1404000-0xc1404fff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xc1400000-0xc1403fff 64bit pref]
pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
_OSC request data:1 1f 1f
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: root bus resource [bus 7f]
pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: Enabled 7 GPEs in block 00 to 3F
acpi root: \_SB_.PCI0 notify handler is installed
acpi root: \_SB_.CPBG notify handler is installed
Found 2 acpi root devices
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x0800-0x080f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: [io 0x0380-0x038e] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs SYN1e1d SYN1e00 SYN0002 PNP0f13 (active)
pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xc4600000-0xc4600fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xc1410000-0xc141ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 123180k freed
Simple Boot Flag at 0x44 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1365976642.508:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1679
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Freeing unused kernel memory: 440k freed
Write protecting the kernel text: 3076k
Write protecting the kernel read-only data: 1196k
NX-protecting the kernel data: 3068k
udevd[55]: starting version 175
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
ACPI: bus type ATA registered
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: irq 41 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xf827e000, 60:eb:69:4b:0f:50, XID 083000c0 IRQ 41
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU0 updated to revision 0x3, date = 2011-09-01
microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU1 updated to revision 0x3, date = 2011-09-01
libata version 3.00 loaded.
microcode: Microcode Update Driver: v2.00 , Peter Oruba
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 42
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508380 irq 42
[Firmware Bug]: Invalid critical threshold (0)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (61 C)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2.00: ATAPI: hp DVD RW AD-7586H, KH04, max UDMA/100
ata1.00: ATA-8: ST9640320AS, 0001HPM1, max UDMA/100
ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST9640320AS 0001 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM hp DVD RW AD-7586H KH04 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 > sda3
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 1995.224 MHz
Switching to clocksource tsc
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
udevd[360]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: AC Adapter [ACAD] (on-line)
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20130117/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \SGGP 2 (20130117/utaddress-251)
ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130117/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \SGGP 2 (20130117/utaddress-251)
ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130117/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \SGGP 2 (20130117/utaddress-251)
ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130117/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 43 for MSI/MSI-X
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Requesting acpi_cpufreq
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI Warning: 0x00005000-0x0000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
intel ips 0000:00:1f.6: No CPUID match found.
intel ips 0000:00:1f.6: IPS not supported on this CPU
wmi: Mapper loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
bcma: bus0: Bus registered
hp_accel: laptop model unknown, using default axes configuration
lis3lv02d: 8 bits sensor found
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input4
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xc450a000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.9.0-rc6+ ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 21, io mem 0xc4509000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.9.0-rc6+ ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
input: HP WMI hotkeys as /devices/virtual/input/input5
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
usb 1-1.3: New USB device found, idVendor=0a5c, idProduct=21b4
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: Broadcom 2070 Bluetooth
usb 1-1.3: Manufacturer: Broadcom Corp
usb 1-1.3: SerialNumber: 70F395A8F8D6
usb 2-1.1: new low-speed USB device number 3 using ehci-pci
usb 2-1.1: New USB device found, idVendor=0461, idProduct=4d0f
usb 2-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.1: Product: USB Optical Mouse
usb 2-1.5: new high-speed USB device number 4 using ehci-pci
usb 2-1.5: New USB device found, idVendor=0408, idProduct=03b2
usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 2-1.5: Product: HP Webcam
usb 2-1.5: Manufacturer: QCM
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
cfg80211: Calling CRDA to update world regulatory domain
[drm] Initialized drm 1.1.0 20060810
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
r8169 0000:03:00.0 eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
r8169 0000:03:00.0 eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
r8169 0000:03:00.0 eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
r8169 0000:03:00.0 eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
r8169 0000:03:00.0 eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
r8169 0000:03:00.0 eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
r8169 0000:03:00.0 eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
r8169 0000:03:00.0 eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Linux video capture interface: v2.00
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input10
hid-generic 0003:0461:4D0F.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
uvcvideo: Found UVC 1.00 device HP Webcam (0408:03b2)
input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[drm] Memory usable by graphics device = 2048M
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 46 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
fbcon: inteldrmfb (fb0) is primary device
brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 16
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
[drm] radeon kernel modesetting enabled.
VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
radeon 0000:01:00.0: enabling device (0000 -> 0003)
acpi device:01: registered as cooling_device3
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
acpi device:13: registered as cooling_device4
acpi device:14: registered as cooling_device5
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/LNXVIDEO:02/input/input13
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[drm] initializing kernel modesetting (REDWOOD 0x1002:0x68C1 0x103C:0x144A).
[drm] register mmio base: 0xC4400000
[drm] register mmio size: 131072
vga_switcheroo: enabled
ATPX version 1
ATOM BIOS: MADISON
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
mtrr: no more MTRRs available
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 430164 kiB
[TTM] Zone highmem: Available graphics memory: 1968344 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 47 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] probing gen 2 caps for device 8086:45 = 2212d01/0
[drm] Loading REDWOOD Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffb5cc00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffb5cc0c
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] LVDS-2
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] VGA-2
[drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xA0142000
[drm] vram apper at 0xA0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[drm] Initialized radeon 2.30.0 20080528 for 0000:01:00.0 on minor 1
Adding 11284476k swap on /dev/sda5. Priority:-1 extents:1 across:11284476k
EXT4-fs (sda3): re-mounted. Opts: (null)
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
fuse init (API version 7.21)
loop: module loaded
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 [email protected]).
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
apm: BIOS not found.
brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
radeon: switched off
radeon 0000:01:00.0: power state changed by ACPI to D3hot
wlan0: authenticate with fc:94:e3:27:aa:db
wlan0: send auth to fc:94:e3:27:aa:db (try 1/3)
wlan0: authenticated
wlan0: associate with fc:94:e3:27:aa:db (try 1/3)
wlan0: RX AssocResp from fc:94:e3:27:aa:db (capab=0x11 status=0 aid=4)
brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
brcmsmac bcma0:0: phyerr 0x1, rate 0x14
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x1, rate 0x14
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x10, rate 0x37
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x10, rate 0x37
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x10, rate 0x37
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x10, rate 0x6e
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x10, rate 0x6e
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x10, rate 0x6e
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x10, rate 0x14
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x10, rate 0xa
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x10, rate 0xa
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x1, rate 0x37
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x1, rate 0x37
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x1, rate 0xa
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x8, rate 0x14
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x8)
brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x1, rate 0x37
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x10, rate 0x14
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x1, rate 0x14
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x10, rate 0x14
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x10, rate 0x14
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x10, rate 0x14
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x1, rate 0x37
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x1, rate 0x37
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x1, rate 0xa
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x10, rate 0x6e
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x10, rate 0x6e
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x10, rate 0x6e
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x1, rate 0x37
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x1, rate 0x37
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x1, rate 0x37
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
brcmsmac bcma0:0: phyerr 0x10, rate 0x14
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x10, rate 0x14
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
brcmsmac bcma0:0: phyerr 0x10, rate 0x14
brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)