dmesg - firts
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008dfff] usable
BIOS-e820: [mem 0x000000000008e000-0x000000000008ffff] reserved
BIOS-e820: [mem 0x0000000000090000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x00000000000bffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x000000008ad33fff] usable
BIOS-e820: [mem 0x000000008ad34000-0x000000008ad5efff] ACPI NVS
BIOS-e820: [mem 0x000000008ad5f000-0x000000008afa2fff] ACPI data
BIOS-e820: [mem 0x000000008afa3000-0x000000008affefff] reserved
BIOS-e820: [mem 0x000000008afff000-0x000000008affffff] ACPI data
BIOS-e820: [mem 0x000000008b000000-0x000000008f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000026fdfffff] usable
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Apple Inc. MacBookPro8,1/Mac-94245B3640C91C81, BIOS MBP81.88Z.0047.B27.1201241646 01/24/12
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x26fe00 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0C0000000 mask FC0000000 uncachable
1 base 0A0000000 mask FE0000000 uncachable
2 base 090000000 mask FF0000000 uncachable
3 base 08C000000 mask FFC000000 uncachable
4 base 08B800000 mask FFF800000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x8ad34 max_arch_pfn = 0x400000000
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x8ad33fff]
[mem 0x00000000-0x8abfffff] page 2M
[mem 0x8ac00000-0x8ad33fff] page 4k
kernel direct mapping tables up to 0x8ad33fff @ [mem 0x1fffb000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x26fdfffff]
[mem 0x100000000-0x26fdfffff] page 2M
kernel direct mapping tables up to 0x26fdfffff @ [mem 0x8ad29000-0x8ad33fff]
RAMDISK: [mem 0x362e2000-0x37168fff]
ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
ACPI: XSDT 000000008ad8e1c0 000A4 (v01 APPLE Apple00 00000047 01000013)
ACPI: FACP 000000008ad8c000 000F4 (v04 APPLE Apple00 00000047 Loki 0000005F)
ACPI: DSDT 000000008ad80000 06F12 (v01 APPLE MacBookP 00080001 INTL 20061109)
ACPI: FACS 000000008ad3e000 00040
ACPI: HPET 000000008ad8b000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: APIC 000000008ad8a000 000BC (v02 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SBST 000000008ad88000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: ECDT 000000008ad87000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SSDT 000000008ad7b000 00024 (v01 APPLE SmcDppt 00001000 INTL 20061109)
ACPI: SSDT 000000008ad79000 0061A (v01 APPLE UsbNoRmh 00001000 INTL 20061109)
ACPI: SSDT 000000008ad76000 00159 (v02 APPLE IGHda 00001000 INTL 20061109)
ACPI: SSDT 000000008ad73000 00527 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 000000008ad72000 009B1 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: SSDT 000000008ad71000 00315 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 000000008ad70000 0037A (v01 PmRef ApTst 00003000 INTL 20061109)
ACPI: MCFG 000000008ad89000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SSDT 000000008ad7f000 00124 (v01 SataRe SataPri 00001000 INTL 20061109)
ACPI: SSDT 000000008ad7e000 000FA (v01 SataRe SataSec 00001000 INTL 20061109)
ACPI: SSDT 000000008ad7d000 00032 (v01 Apple SsdtS3 00001000 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000026fdfffff]
Initmem setup node 0 [mem 0x00000000-0x26fdfffff]
NODE_DATA [mem 0x26fdfc000-0x26fdfffff]
[ffffea0000000000-ffffea0009bfffff] PMD -> [ffff880267400000-ffff88026f3fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x26fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0008dfff]
node 0: [mem 0x00090000-0x0009efff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0x8ad33fff]
node 0: [mem 0x100000000-0x26fdfffff]
On node 0 totalpages: 2074305
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 547188 pages, LIFO batch:31
Normal zone: 23544 pages used for memmap
Normal zone: 1483272 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000008e000 - 0000000000090000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000c0000
PM: Registered nosave memory: 00000000000c0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040000000 - 0000000040200000
PM: Registered nosave memory: 000000008ad34000 - 000000008ad5f000
PM: Registered nosave memory: 000000008ad5f000 - 000000008afa3000
PM: Registered nosave memory: 000000008afa3000 - 000000008afff000
PM: Registered nosave memory: 000000008afff000 - 000000008b000000
PM: Registered nosave memory: 000000008b000000 - 000000008fa00000
PM: Registered nosave memory: 000000008fa00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
e820: [mem 0x8fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88026fa00000 s83584 r8192 d22912 u262144
pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2034371
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8068448k/10221568k available (6711k kernel code, 1924348k absent, 228772k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2394.476 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.95 BogoMIPS (lpj=9577904)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-2435M CPU @ 2.40GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (19155.80 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x8ad34000-0x8ad5efff] (176128 bytes)
dummy:
RTC time: 9:54:45, date: 04/09/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe9bfffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
Freeing initrd memory: 14876k freed
ACPI: SSDT 000000008ad39818 00781 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00781 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 000000008ad3ac18 003A4 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 003A4 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT 000000008ad38d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0x8fa00000-0xfeafffff]
pci_root PNP0A08:00: >host bridge window [mem 0xfed40000-0xfed44fff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x8fa00000-0xfeafffff]
pci_bus 0000:00: >root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: >[8086:0104] type 00 class 0x060000
pci 0000:00:01.0: >[8086:0101] type 01 class 0x060400
pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: >[8086:0105] type 01 class 0x060400
pci 0000:00:01.1: >PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: >[8086:0126] type 00 class 0x030000
pci 0000:00:02.0: >reg 10: [mem 0xa0000000-0xa03fffff 64bit]
pci 0000:00:02.0: >reg 18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: >reg 20: [io 0x2000-0x203f]
pci 0000:00:16.0: >[8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: >reg 10: [mem 0xa0907100-0xa090710f 64bit]
pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: >[8086:1c2c] type 00 class 0x0c0300
pci 0000:00:1a.0: >reg 20: [io 0x2120-0x213f]
pci 0000:00:1a.7: >[8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.7: >reg 10: [mem 0xa0906c00-0xa0906fff]
pci 0000:00:1a.7: >PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: >[8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: >reg 10: [mem 0xa0900000-0xa0903fff 64bit]
pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: >[8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: >[8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: >[8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: >PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: >[8086:1c27] type 00 class 0x0c0300
pci 0000:00:1d.0: >reg 20: [io 0x20c0-0x20df]
pci 0000:00:1d.7: >[8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.7: >reg 10: [mem 0xa0906800-0xa0906bff]
pci 0000:00:1d.7: >PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: >[8086:1c49] type 00 class 0x060100
pci 0000:00:1f.2: >[8086:1c01] type 00 class 0x01018f
pci 0000:00:1f.2: >reg 10: [io 0x2148-0x214f]
pci 0000:00:1f.2: >reg 14: [io 0x215c-0x215f]
pci 0000:00:1f.2: >reg 18: [io 0x2140-0x2147]
pci 0000:00:1f.2: >reg 1c: [io 0x2158-0x215b]
pci 0000:00:1f.2: >reg 20: [io 0x2060-0x206f]
pci 0000:00:1f.2: >reg 24: [io 0xffe0-0xffef]
pci 0000:00:1f.3: >[8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: >reg 10: [mem 0xa0907000-0xa09070ff 64bit]
pci 0000:00:1f.3: >reg 20: [io 0xefa0-0xefbf]
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [mem 0xa0800000-0xa08fffff]
pci 0000:00:01.1: >PCI bridge to [bus 05-9b]
pci 0000:00:01.1: > bridge window [io 0x3000-0x3fff]
pci 0000:00:01.1: > bridge window [mem 0xa0a00000-0xa4efffff]
pci 0000:00:01.1: > bridge window [mem 0xa4f00000-0xa8efffff 64bit pref]
pci 0000:02:00.0: >[14e4:16b4] type 00 class 0x020000
pci 0000:02:00.0: >reg 10: [mem 0xa0400000-0xa040ffff 64bit pref]
pci 0000:02:00.0: >reg 18: [mem 0xa0410000-0xa041ffff 64bit pref]
pci 0000:02:00.0: >PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: >[14e4:16bc] type 00 class 0x080501
pci 0000:02:00.1: >reg 10: [mem 0xa0420000-0xa042ffff 64bit pref]
pci 0000:02:00.1: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
pci 0000:00:1c.0: > bridge window [mem 0xa0700000-0xa07fffff]
pci 0000:00:1c.0: > bridge window [mem 0xa0400000-0xa04fffff 64bit pref]
pci 0000:03:00.0: >[14e4:4331] type 00 class 0x028000
pci 0000:03:00.0: >reg 10: [mem 0xa0600000-0xa0603fff 64bit]
pci 0000:03:00.0: >supports D1 D2
pci 0000:03:00.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
pci 0000:00:1c.1: > bridge window [mem 0xa0600000-0xa06fffff]
pci 0000:04:00.0: >[11c1:5901] type 00 class 0x0c0010
pci 0000:04:00.0: >reg 10: [mem 0xa0500000-0xa0500fff 64bit]
pci 0000:04:00.0: >supports D1 D2
pci 0000:04:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: >PCI bridge to [bus 04-04]
pci 0000:00:1c.2: > bridge window [mem 0xa0500000-0xa05fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008e000-0x0008ffff]
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x8ad34000-0x8bffffff]
e820: reserve RAM buffer [mem 0x26fe00000-0x26fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
pnp 00:00: >[mem 0x000cc000-0x000cffff window]
pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
pnp 00:00: >[mem 0x000dc000-0x000dffff window]
pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
pnp 00:00: >[mem 0x000ec000-0x000effff window]
pnp 00:00: >[mem 0x000f0000-0x000fffff window]
pnp 00:00: >[mem 0x8fa00000-0xfeafffff window]
pnp 00:00: >[mem 0xfed40000-0xfed44fff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[io 0x0000-0x001f]
pnp 00:01: >[io 0x0081-0x0091]
pnp 00:01: >[io 0x0093-0x009f]
pnp 00:01: >[io 0x00c0-0x00df]
pnp 00:01: >[dma 4]
pnp 00:01: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: >[mem 0xff000000-0xffffffff]
pnp 00:02: >Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: >[mem 0xfed00000-0xfed003ff]
system 00:03: >[mem 0xfed00000-0xfed003ff] has been reserved
system 00:03: >Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:04: >[io 0x00f0]
pnp 00:04: >[irq 13]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: >[io 0x002e-0x002f]
pnp 00:05: >[io 0x004e-0x004f]
pnp 00:05: >[io 0x0061]
pnp 00:05: >[io 0x0063]
pnp 00:05: >[io 0x0065]
pnp 00:05: >[io 0x0067]
pnp 00:05: >[io 0x0070]
pnp 00:05: >[io 0x0080]
pnp 00:05: >[io 0x0092]
pnp 00:05: >[io 0x00b2-0x00b3]
pnp 00:05: >[io 0x0680-0x069f]
pnp 00:05: >[io 0x1000-0x100f]
pnp 00:05: >[io 0xffff]
pnp 00:05: >[io 0xffff]
pnp 00:05: >[io 0x0400-0x047f]
pnp 00:05: >[io 0x0500-0x057f]
pnp 00:05: >[io 0x164e-0x164f]
system 00:05: >[io 0x0680-0x069f] has been reserved
system 00:05: >[io 0x1000-0x100f] has been reserved
system 00:05: >[io 0xffff] has been reserved
system 00:05: >[io 0xffff] has been reserved
system 00:05: >[io 0x0400-0x047f] has been reserved
system 00:05: >[io 0x0500-0x057f] has been reserved
system 00:05: >[io 0x164e-0x164f] has been reserved
system 00:05: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: >[io 0x0070-0x0077]
pnp 00:06: >[irq 8]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: >[io 0x0300-0x031f]
pnp 00:07: >[irq 6]
pnp 00:07: >Plug and Play ACPI device, IDs APP0001 (active)
pnp 00:08: >[io 0x0700-0x07fe]
pnp 00:08: >Plug and Play ACPI device, IDs APP000b (active)
pnp 00:09: >[mem 0xfed1c000-0xfed1ffff]
pnp 00:09: >[mem 0xfed10000-0xfed17fff]
pnp 00:09: >[mem 0xfed18000-0xfed18fff]
pnp 00:09: >[mem 0xfed19000-0xfed19fff]
pnp 00:09: >[mem 0xe0000000-0xefffffff]
pnp 00:09: >[mem 0xfed20000-0xfed3ffff]
pnp 00:09: >[mem 0xfed90000-0xfed93fff]
pnp 00:09: >[mem 0xfed45000-0xfed8ffff]
pnp 00:09: >[mem 0xff000000-0xffffffff]
pnp 00:09: >[mem 0xfee00000-0xfeefffff]
pnp 00:09: >[mem 0x00000000-0xffffffffffffffff disabled]
system 00:09: >[mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: >[mem 0xfed10000-0xfed17fff] could not be reserved
system 00:09: >[mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: >[mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:09: >[mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: >[mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: >[mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: >[mem 0xff000000-0xffffffff] could not be reserved
system 00:09: >[mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: >[mem 0x20000000-0x201fffff]
pnp 00:0a: >[mem 0x40000000-0x401fffff]
system 00:0a: >[mem 0x20000000-0x201fffff] has been reserved
system 00:0a: >[mem 0x40000000-0x401fffff] has been reserved
system 00:0a: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [mem 0xa0800000-0xa08fffff]
pci 0000:00:01.1: >PCI bridge to [bus 05-9b]
pci 0000:00:01.1: > bridge window [io 0x3000-0x3fff]
pci 0000:00:01.1: > bridge window [mem 0xa0a00000-0xa4efffff]
pci 0000:00:01.1: > bridge window [mem 0xa4f00000-0xa8efffff 64bit pref]
pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
pci 0000:00:1c.0: > bridge window [mem 0xa0700000-0xa07fffff]
pci 0000:00:1c.0: > bridge window [mem 0xa0400000-0xa04fffff 64bit pref]
pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
pci 0000:00:1c.1: > bridge window [mem 0xa0600000-0xa06fffff]
pci 0000:00:1c.2: >PCI bridge to [bus 04-04]
pci 0000:00:1c.2: > bridge window [mem 0xa0500000-0xa05fffff]
pci 0000:00:01.0: >enabling device (0000 -> 0002)
pci 0000:00:1c.1: >power state changed by ACPI to D0
pci 0000:00:1c.1: >power state changed by ACPI to D0
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0x8fa00000-0xfeafffff]
pci_bus 0000:00: >resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: >resource 1 [mem 0xa0800000-0xa08fffff]
pci_bus 0000:05: >resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: >resource 1 [mem 0xa0a00000-0xa4efffff]
pci_bus 0000:05: >resource 2 [mem 0xa4f00000-0xa8efffff 64bit pref]
pci_bus 0000:02: >resource 1 [mem 0xa0700000-0xa07fffff]
pci_bus 0000:02: >resource 2 [mem 0xa0400000-0xa04fffff 64bit pref]
pci_bus 0000:03: >resource 1 [mem 0xa0600000-0xa06fffff]
pci_bus 0000:04: >resource 1 [mem 0xa0500000-0xa05fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: >Boot video device
PCI: CLS 256 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x86d29000-0x8ad28fff] (64MB) mapped at [ffff880086d29000-ffff88008ad28fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1365501286.196:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 15787
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
pcieport 0000:00:01.1: >irq 41 for MSI/MSI-X
pcieport 0000:00:1c.0: >irq 42 for MSI/MSI-X
pcieport 0000:00:1c.1: >irq 43 for MSI/MSI-X
pcieport 0000:00:1c.2: >irq 44 for MSI/MSI-X
pcieport 0000:00:01.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:01.1: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.1:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:1c.0: >Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: >Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:1c.1: >Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:1c.2: >Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: >service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP1] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
ACPI: Battery Slot [BAT0] (battery present)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: >version 2.13
ata_piix 0000:00:1f.2: >MAP [
P0 P2 P1 P3 ]
ACPI: Battery Slot [BAT0] (battery present)
ata_piix 0000:00:1f.2: >setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x2148 ctl 0x215c bmdma 0x2060 irq 19
ata2: SATA max UDMA/133 cmd 0x2140 ctl 0x2158 bmdma 0x2068 irq 19
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: >setting latency timer to 64
ehci_hcd 0000:00:1a.7: >EHCI Host Controller
ehci_hcd 0000:00:1a.7: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: >debug port 2
ehci_hcd 0000:00:1a.7: >cache line size of 256 is not supported
ehci_hcd 0000:00:1a.7: >irq 23, io mem 0xa0906c00
ehci_hcd 0000:00:1a.7: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1a.7
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >6 ports detected
ehci_hcd 0000:00:1d.7: >setting latency timer to 64
ehci_hcd 0000:00:1d.7: >EHCI Host Controller
ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: >debug port 2
ehci_hcd 0000:00:1d.7: >cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: >irq 22, io mem 0xa0906800
ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:1d.7
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: >setting latency timer to 64
uhci_hcd 0000:00:1a.0: >UHCI Host Controller
uhci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: >irq 21, io base 0x00002120
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: UHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb3: >SerialNumber: 0000:00:1a.0
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.0: >setting latency timer to 64
uhci_hcd 0000:00:1d.0: >UHCI Host Controller
uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: >irq 19, io base 0x000020c0
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: UHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb4: >SerialNumber: 0000:00:1d.0
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: >RTC can wake from S4
rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 9:506:929
rtc_cmos 00:06: >setting system clock to 2013-04-09 09:54:47 UTC (1365501287)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 1-1: >new high-speed USB device number 2 using ehci_hcd
usb 1-1: >New USB device found, idVendor=0424, idProduct=2513
usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: >USB hub found
hub 1-1:1.0: >3 ports detected
usb 1-2: >new high-speed USB device number 3 using ehci_hcd
usb 1-2: >New USB device found, idVendor=05ac, idProduct=8509
usb 1-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: >Product: FaceTime HD Camera (Built-in)
usb 1-2: >Manufacturer: Apple Inc.
usb 1-2: >SerialNumber: DJHB8R0144DH7FL0
Refined TSC clocksource calibration: 2394.560 MHz.
Switching to clocksource tsc
usb 2-1: >new high-speed USB device number 2 using ehci_hcd
usb 2-1: >New USB device found, idVendor=0424, idProduct=2513
usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: >USB hub found
hub 2-1:1.0: >2 ports detected
usb 1-1.1: >new full-speed USB device number 4 using ehci_hcd
usb 1-1.1: >New USB device found, idVendor=0a5c, idProduct=4500
usb 1-1.1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: >Product: BRCM2070 Hub
usb 1-1.1: >Manufacturer: Apple Inc.
hub 1-1.1:1.0: >USB hub found
hub 1-1.1:1.0: >3 ports detected
usb 1-1.2: >new full-speed USB device number 5 using ehci_hcd
usb 1-1.2: >New USB device found, idVendor=05ac, idProduct=0253
usb 1-1.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: >Product: Apple Internal Keyboard / Trackpad
usb 1-1.2: >Manufacturer: Apple Inc.
ata1.01: failed to resume link (SControl 0)
ata2.01: failed to resume link (SControl 0)
usb 2-1.1: >new low-speed USB device number 3 using ehci_hcd
ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: ATAPI: HL-DT-ST DVDRW GS31N, TA17, max UDMA/133
usb 2-1.1: >New USB device found, idVendor=05ac, idProduct=8242
usb 2-1.1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: >Product: IR Receiver
usb 2-1.1: >Manufacturer: Apple Computer, Inc.
ata2.00: configured for UDMA/133
ata1.00: ATA-9: INTEL SSDSC2CT120A3, 300i, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: >Direct-Access ATA INTEL SSDSC2CT12 300i PQ: 0 ANSI: 5
sd 0:0:0:0: >[sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: >[sda] Attached SCSI disk
scsi 1:0:0:0: >CD-ROM HL-DT-ST DVDRW GS31N TA17 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: >Attached scsi CD-ROM sr0
sr 1:0:0:0: >Attached scsi generic sg1 type 5
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[105]: starting version 175
usb 1-1.1.1: >new full-speed USB device number 6 using ehci_hcd
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:02:00.1: >SDHCI controller found [14e4:16bc] (rev 10)
sdhci-pci 0000:02:00.1: >Invalid iomem size. You may experience problems.
mmc0: no vmmc regulator found
Registered led device: mmc0::
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA
tg3.c:v3.123 (March 21, 2012)
usb 1-1.1.1: >New USB device found, idVendor=05ac, idProduct=820a
usb 1-1.1.1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
firewire_ohci 0000:04:00.0: >irq 45 for MSI/MSI-X
firewire_ohci 0000:04:00.0: >added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
input: HID 05ac:820a as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input4
hid-generic 0003:05AC:820A.0004: >input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:1a.7-1.1.1/input0
tg3 0000:02:00.0: >eth0: Tigon3 [partno(BCM957765) rev 57785100] (PCI Express) MAC address 3c:07:54:2f:ba:58
tg3 0000:02:00.0: >eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:02:00.0: >eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:00.0: >eth0: dma_rwctrl[00000001] dma_mask[64-bit]
input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
apple 0003:05AC:0253.0001: >input,hidraw1: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1a.7-1.2/input0
apple 0003:05AC:0253.0002: >hidraw2: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1a.7-1.2/input1
apple 0003:05AC:8242.0003: >hiddev0,hidraw3: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.7-1.1/input0
usb 1-1.1.2: >new full-speed USB device number 7 using ehci_hcd
usb 1-1.1.2: >New USB device found, idVendor=05ac, idProduct=820b
usb 1-1.1.2: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 05ac:820b as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input6
hid-generic 0003:05AC:820B.0005: >input,hidraw4: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:1a.7-1.1.2/input0
usb 1-1.1.3: >new full-speed USB device number 8 using ehci_hcd
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.1.3: >New USB device found, idVendor=05ac, idProduct=821a
usb 1-1.1.3: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1.3: >Product: Bluetooth USB Host Controller
usb 1-1.1.3: >Manufacturer: Apple Inc.
Adding 4103164k swap on /dev/sda5. Priority:-1 extents:1 across:4103164k SS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[363]: starting version 175
lp: driver loaded but no devices found
bcma: Found chip with id 0x4331, rev 0x02 and package 0x09
bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0)
bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0)
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: >setting latency timer to 64
pci 0000:00:00.0: >Intel Sandybridge Chipset
pci 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable
firewire_core 0000:04:00.0: created device fw0: GUID a4b197fffe6cefa2, S800
firewire_core 0000:04:00.0: phy config: new root=ffc0, gap_count=63
pci 0000:00:00.0: >detected 65536K stolen memory
apple_gmux: gmux device not present
bcma: Bus registered
cfg80211: Calling CRDA to update world regulatory domain
i915 0000:00:02.0: >irq 46 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device FaceTime HD Camera (Built-in) (05ac:8509)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
input: FaceTime HD Camera (Built-in) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usbcore: registered new interface driver btusb
usb 1-1.1.1: >USB disconnect, device number 6
input: bcm5974 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.2/input/input8
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
usbcore: registered new interface driver bcm5974
b43-phy0: Broadcom 4331 WLAN found (core revision 29)
Broadcom 43xx driver loaded [ Features: PNL ]
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
microcode: Microcode Update Driver: v2.00 , Peter Oruba
ieee80211 phy0: >Selected rate control algorithm 'minstrel_ht'
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
applesmc: key=379 fan=1 temp=24 acc=1 lux=2 kbd=1
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
usb 1-1.1.2: >USB disconnect, device number 7
input: applesmc as /devices/platform/applesmc.768/input/input9
Registered led device: smc::kbd_backlight
init: failsafe main process (713) killed by TERM signal
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
tg3 0000:02:00.0: >irq 47 for MSI/MSI-X
tg3 0000:02:00.0: >irq 48 for MSI/MSI-X
tg3 0000:02:00.0: >irq 49 for MSI/MSI-X
tg3 0000:02:00.0: >irq 50 for MSI/MSI-X
tg3 0000:02:00.0: >irq 51 for MSI/MSI-X
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: alsa-restore main process (1023) terminated with status 19
acpi device:11: >registered as cooling_device4
ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
mei 0000:00:16.0: >setting latency timer to 64
mei 0000:00:16.0: >irq 52 for MSI/MSI-X
mei 0000:00:16.0: >wd: failed to find the client
ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:00:1b.0: >irq 53 for MSI/MSI-X
b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
init: plymouth-stop pre-start process (1423) terminated with status 1
wlan0: authenticate with 58:6d:8f:b3:08:2c
wlan0: send auth to 58:6d:8f:b3:08:2c (try 1/3)
wlan0: authenticated
wlan0: associate with 58:6d:8f:b3:08:2c (try 1/3)
wlan0: RX AssocResp from 58:6d:8f:b3:08:2c (capab=0x411 status=0 aid=6)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Core temperature/speed normal
CPU1: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Core temperature/speed normal
CPU0: Package temperature/speed normal
CPU2: Package temperature/speed normal
[Hardware Error]: Machine check events logged
CPU2: Core temperature above threshold, cpu clock throttled (total events = 18182)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 19740)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 19740)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 18182)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 19740)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 19740)
CPU2: Core temperature/speed normal
CPU1: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Core temperature/speed normal
CPU0: Package temperature/speed normal
CPU2: Package temperature/speed normal
[Hardware Error]: Machine check events logged