dmesg - tres
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.6.10-4.fc18.x86_64 (mockbuild@) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) ) #1 SMP Tue Dec 11 18:01:27 UTC 2012
Command line: initrd=initrd0.img root=live:CDLABEL=Fedora-18-x86_64-Live-XFCE.iso rootfstype=auto ro rd.live.image quiet rhgb rd.luks=0 rd.md=0 rd.dm=0 BOOT_IMAGE=vmlinuz0
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007fe4ffff] usable
BIOS-e820: [mem 0x000000007fe50000-0x000000007fe57fff] ACPI data
BIOS-e820: [mem 0x000000007fe58000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000087fffefff] usable
NX (Execute Disable) protection: active
DMI 2.3 present.
DMI: HP ProLiant DL585 G2, BIOS A07 02/27/2007
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x87ffff max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000880000000 aka 34816M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7fe50 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff8800000f4f80]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x7fe4ffff]
[mem 0x00000000-0x7fdfffff] page 2M
[mem 0x7fe00000-0x7fe4ffff] page 4k
kernel direct mapping tables up to 0x7fe4ffff @ [mem 0x1fffc000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x87fffefff]
[mem 0x100000000-0x87fdfffff] page 2M
[mem 0x87fe00000-0x87fffefff] page 4k
kernel direct mapping tables up to 0x87fffefff @ [mem 0x7fe30000-0x7fe4ffff]
RAMDISK: [mem 0x7e410000-0x7fe2efff]
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 000000007fe50780 00054 (v01 HP A07 00000002 \xffffffd2? 0000162E)
ACPI: FACP 000000007fe50800 000F4 (v03 HP A07 00000002 \xffffffd2? 0000162E)
ACPI: DSDT 000000007fe50900 042FF (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 000000007fe500c0 00040
ACPI: SPCR 000000007fe50100 00050 (v01 HP SPCRRBSU 00000001 \xffffffd2? 0000162E)
ACPI: MCFG 000000007fe50180 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 000000007fe501c0 00038 (v01 HP A07 00000002 \xffffffd2? 0000162E)
ACPI: SPMI 000000007fe50200 00040 (v05 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: APIC 000000007fe50240 00106 (v01 HP 00000083 00000002 00000000)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
Number of physical nodes 4
Node 0 using interleaving mode 3/0
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000087fffefff]
Initmem setup node 0 [mem 0x00000000-0x87fffefff]
NODE_DATA [mem 0x87ffeb000-0x87fffefff]
[ffffea0000000000-ffffea0021ffffff] PMD -> [ffff88085f600000-ffff88087f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x87fffefff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0x7fe4ffff]
node 0: [mem 0x100000000-0x87fffefff]
On node 0 totalpages: 8388062
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 503440 pages, LIFO batch:31
Normal zone: 122880 pages used for memmap
Normal zone: 7741439 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xf9af0000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 17, address 0xf9af0000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xf9fd0000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 17, address 0xf9fd0000, GSI 24-30
ACPI: IOAPIC (id[0x0a] address[0xf9fe0000] gsi_base[31])
IOAPIC[2]: apic_id 10, version 17, address 0xf9fe0000, GSI 31-37
ACPI: IOAPIC (id[0x0b] address[0xf9ff0000] gsi_base[38])
IOAPIC[3]: apic_id 11, version 17, address 0xf9ff0000, GSI 38-61
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
ACPI: NMI_SRC (dfl dfl global_irq 28)
ACPI: NMI_SRC (dfl dfl global_irq 35)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 78
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 000000007fe50000 - 000000007fe58000
PM: Registered nosave memory: 000000007fe58000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
e820: [mem 0x80000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88087fc00000 s84288 r8192 d22208 u262144
pcpu-alloc: s84288 r8192 d22208 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8248792
Policy zone: Normal
Kernel command line: initrd=initrd0.img root=live:CDLABEL=Fedora-18-x86_64-Live-XFCE.iso rootfstype=auto ro rd.live.image quiet rhgb rd.luks=0 rd.md=0 rd.dm=0 BOOT_IMAGE=vmlinuz0
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Node 0: aperture @ bf0a000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 74000000
PM: Registered nosave memory: 0000000074000000 - 0000000078000000
Memory: 32852300k/35651580k available (6334k kernel code, 2099332k absent, 699948k reserved, 6870k data, 1036k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
NR_IRQS:8448 nr_irqs:1390 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2813.277 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 5626.55 BogoMIPS (lpj=2813277)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
process: using AMD E400 aware idle routine
ACPI: Core revision 20120711
ftrace: allocating 23489 entries in 92 pages
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (45006.12 BogoMIPS)
devtmpfs: initialized
atomic64 test passed for x86-64 platform with CX8 and with SSE
RTC time: 18:13:52, date: 03/27/13
NET: Registered protocol family 16
node 0 link 1: io port [1000, 4fff]
node 1 link 2: io port [f000, ffff]
TOM: 0000000080000000 aka 2048M
node 0 link 1: mmio [f0000000, f9efffff]
node 1 link 2: mmio [f9f00000, fdffffff]
node 0 link 1: mmio [80000000, 83ffffff]
node 1 link 2: mmio [84000000, 8fffffff]
node 0 link 1: mmio [a0000, bffff]
TOM2: 0000000880000000 aka 34816M
bus: [bus 00-3f] on node 0 link 1
bus: 00 [io 0x0000-0xefff]
bus: 00 [mem 0x90000000-0xf9efffff]
bus: 00 [mem 0x80000000-0x83ffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xfe000000-0xffffffff]
bus: 00 [mem 0x880000000-0xfcffffffff]
bus: [bus 40-ff] on node 1 link 2
bus: 40 [io 0xf000-0xffff]
bus: 40 [mem 0xf9f00000-0xfdffffff]
bus: 40 [mem 0x84000000-0x8fffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: HP ProLiant DL585 G2 detected, enabling pci=bfsort.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 000000007fe58000 009BC (v02 HP PNOWSSDT 00000002 HP 00000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 009BC (v02 HP PNOWSSDT 00000002 HP 00000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03bb] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x03c0-0x03df] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0fff] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x1000-0x4fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xf9efffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0x83ffffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
PCI: root bus 00: hardware-probed resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: busn_res: [bus 00-3f] is inserted under domain [bus 00-ff]
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0xefff]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xf9efffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0x83ffffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xfe000000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x880000000-0xfcffffffff]
pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
pci 0000:00:02.0: reg 10: [mem 0xf9ae0000-0xf9ae0fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
pci 0000:00:02.1: reg 10: [mem 0xf9ad0000-0xf9ad00ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
pci 0000:00:06.0: reg 20: [io 0x1000-0x100f]
pci 0000:00:09.0: [10de:005c] type 01 class 0x060401
pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:00:19.0: [1022:1100] type 00 class 0x060000
pci 0000:00:19.1: [1022:1101] type 00 class 0x060000
pci 0000:00:19.2: [1022:1102] type 00 class 0x060000
pci 0000:00:19.3: [1022:1103] type 00 class 0x060000
pci 0000:00:1a.0: [1022:1100] type 00 class 0x060000
pci 0000:00:1a.1: [1022:1101] type 00 class 0x060000
pci 0000:00:1a.2: [1022:1102] type 00 class 0x060000
pci 0000:00:1a.3: [1022:1103] type 00 class 0x060000
pci 0000:00:1b.0: [1022:1100] type 00 class 0x060000
pci 0000:00:1b.1: [1022:1101] type 00 class 0x060000
pci 0000:00:1b.2: [1022:1102] type 00 class 0x060000
pci 0000:00:1b.3: [1022:1103] type 00 class 0x060000
pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-3f]
pci 0000:01:03.0: [1002:515e] type 00 class 0x030000
pci 0000:01:03.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
pci 0000:01:03.0: reg 14: [io 0x3000-0x30ff]
pci 0000:01:03.0: reg 18: [mem 0xf9cf0000-0xf9cfffff]
pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: [0e11:b203] type 00 class 0x088000
pci 0000:01:04.0: reg 10: [io 0x2800-0x28ff]
pci 0000:01:04.0: reg 14: [mem 0xf9ce0000-0xf9ce01ff]
pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
pci 0000:01:04.2: [0e11:b204] type 00 class 0x088000
pci 0000:01:04.2: reg 10: [io 0x3400-0x34ff]
pci 0000:01:04.2: reg 14: [mem 0xf9cd0000-0xf9cd07ff]
pci 0000:01:04.2: reg 18: [mem 0xf9cc0000-0xf9cc1fff]
pci 0000:01:04.2: reg 1c: [mem 0xf9c00000-0xf9c7ffff]
pci 0000:01:04.2: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
pci 0000:01:04.4: [103c:3300] type 00 class 0x0c0300
pci 0000:01:04.4: reg 20: [io 0x3800-0x381f]
pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
pci 0000:01:04.6: [103c:3302] type 00 class 0x0c0701
pci 0000:01:04.6: reg 10: [mem 0xf9bf0000-0xf9bf00ff]
pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0x2000-0x3fff]
pci 0000:00:09.0: bridge window [mem 0xf9b00000-0xf9cfffff]
pci 0000:00:09.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
pci 0000:00:09.0: bridge window [io 0x0000-0xefff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x90000000-0xf9efffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x80000000-0x83ffffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0xfe000000-0xffffffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x880000000-0xfcffffffff] (subtractive decode)
pci_bus 0000:08: busn_res: [bus 08-0a] is inserted under [bus 00-3f]
pci 0000:08:00.0: [103c:3230] type 00 class 0x010400
pci 0000:08:00.0: reg 10: [mem 0xf9e00000-0xf9efffff 64bit]
pci 0000:08:00.0: reg 18: [io 0x4000-0x40ff]
pci 0000:08:00.0: reg 1c: [mem 0xf9df0000-0xf9df0fff 64bit]
pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:08:00.0: supports D1
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0c.0: PCI bridge to [bus 08-0a]
pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:0c.0: bridge window [mem 0xf9d00000-0xf9efffff]
pci_bus 0000:05: busn_res: [bus 05-07] is inserted under [bus 00-3f]
pci 0000:00:0d.0: PCI bridge to [bus 05-07]
pci_bus 0000:02: busn_res: [bus 02-04] is inserted under [bus 00-3f]
pci 0000:00:0e.0: PCI bridge to [bus 02-04]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 40-ff])
pci_root PNP0A03:01: host bridge window [io 0xf000-0xffff] (ignored)
pci_root PNP0A03:01: host bridge window [mem 0xf9f00000-0xfdffffff] (ignored)
pci_root PNP0A03:01: host bridge window [mem 0x84000000-0x8fffffff] (ignored)
PCI: root bus 40: hardware-probed resources
PCI host bridge to bus 0000:40
pci_bus 0000:40: busn_res: [bus 40-ff] is inserted under domain [bus 00-ff]
pci_bus 0000:40: root bus resource [bus 40-ff]
pci_bus 0000:40: root bus resource [io 0xf000-0xffff]
pci_bus 0000:40: root bus resource [mem 0xf9f00000-0xfdffffff]
pci_bus 0000:40: root bus resource [mem 0x84000000-0x8fffffff]
pci 0000:40:00.0: [10de:005e] type 00 class 0x058000
pci 0000:40:01.0: [10de:00d3] type 00 class 0x058000
pci 0000:40:0b.0: [10de:005d] type 01 class 0x060400
pci 0000:40:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0c.0: [10de:005d] type 01 class 0x060400
pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0d.0: [10de:005d] type 01 class 0x060400
pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0e.0: [10de:005d] type 01 class 0x060400
pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:10.0: [1022:7458] type 01 class 0x060400
pci 0000:40:10.0: Enabling HT MSI Mapping
pci 0000:40:10.1: [1022:7459] type 00 class 0x080010
pci 0000:40:11.0: [1022:7458] type 01 class 0x060400
pci 0000:40:11.0: Enabling HT MSI Mapping
pci 0000:40:11.1: [1022:7459] type 00 class 0x080010
pci_bus 0000:4f: busn_res: [bus 4f-51] is inserted under [bus 40-ff]
pci 0000:40:0b.0: PCI bridge to [bus 4f-51]
pci_bus 0000:4c: busn_res: [bus 4c-4e] is inserted under [bus 40-ff]
pci 0000:40:0c.0: PCI bridge to [bus 4c-4e]
pci_bus 0000:49: busn_res: [bus 49-4b] is inserted under [bus 40-ff]
pci 0000:40:0d.0: PCI bridge to [bus 49-4b]
pci_bus 0000:46: busn_res: [bus 46-48] is inserted under [bus 40-ff]
pci 0000:40:0e.0: PCI bridge to [bus 46-48]
pci_bus 0000:41: busn_res: [bus 41] is inserted under [bus 40-ff]
pci 0000:41:01.0: [14e4:164a] type 00 class 0x020000
pci 0000:41:01.0: reg 10: [mem 0xfc000000-0xfdffffff 64bit]
pci 0000:41:01.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:41:01.0: PME# supported from D3hot D3cold
pci 0000:41:02.0: [14e4:164a] type 00 class 0x020000
pci 0000:41:02.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:41:02.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:41:02.0: PME# supported from D3hot D3cold
pci 0000:40:10.0: PCI bridge to [bus 41]
pci 0000:40:10.0: bridge window [mem 0xfa000000-0xfdffffff]
pci_bus 0000:42: busn_res: [bus 42-45] is inserted under [bus 40-ff]
pci 0000:40:11.0: PCI bridge to [bus 42-45]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT]
pci0000:40: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:40: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5
ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *10
ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled.
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:03.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fe50000-0x7fffffff]
e820: reserve RAM buffer [mem 0x87ffff000-0x87fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3f]
pnp 00:00: [io 0x0000-0x03af window]
pnp 00:00: [io 0x03b0-0x03bb window]
pnp 00:00: [io 0x03c0-0x03df window]
pnp 00:00: [io 0x03e0-0x0fff window]
pnp 00:00: [io 0x1000-0x4fff window]
pnp 00:00: [io 0x0000 window]
pnp 00:00: [io 0x0000 window]
pnp 00:00: [io 0x0000 window]
pnp 00:00: [mem 0xf0000000-0xf9efffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0x80000000-0x83ffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0070-0x0079]
pnp 00:01: [io 0x0408-0x040f]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0020-0x003f]
pnp 00:01: [io 0x00a0-0x00bf]
pnp 00:01: [io 0x0090-0x009f]
pnp 00:01: [io 0x0050-0x0053]
pnp 00:01: [io 0x0700-0x073f]
pnp 00:01: [io 0x0800-0x08fe]
pnp 00:01: [io 0x0900-0x09fe]
pnp 00:01: [io 0x09ff]
pnp 00:01: [io 0x0a00-0x0afe]
pnp 00:01: [io 0x0aff]
pnp 00:01: [io 0x0b00-0x0bfe]
pnp 00:01: [io 0x0bff]
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0c80-0x0c83]
pnp 00:01: [io 0x0cd4-0x0cd7]
pnp 00:01: [io 0x0cf9]
pnp 00:01: [io 0x0f50-0x0f58]
pnp 00:01: [io 0x00f0]
pnp 00:01: [io 0x0ca0-0x0ca1]
pnp 00:01: [io 0x0ca4-0x0ca5]
pnp 00:01: [io 0x0c00-0x0c03]
pnp 00:01: [io 0x02f8-0x02ff]
pnp 00:01: [mem 0x80000000-0x8fffffff]
system 00:01: [io 0x0408-0x040f] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0700-0x073f] has been reserved
system 00:01: [io 0x0800-0x08fe] has been reserved
system 00:01: [io 0x0900-0x09fe] has been reserved
system 00:01: [io 0x09ff] has been reserved
system 00:01: [io 0x0a00-0x0afe] has been reserved
system 00:01: [io 0x0aff] has been reserved
system 00:01: [io 0x0b00-0x0bfe] has been reserved
system 00:01: [io 0x0bff] has been reserved
system 00:01: [io 0x0c80-0x0c83] has been reserved
system 00:01: [io 0x0cd4-0x0cd7] has been reserved
system 00:01: [io 0x0cf9] could not be reserved
system 00:01: [io 0x0f50-0x0f58] has been reserved
system 00:01: [io 0x0ca0-0x0ca1] has been reserved
system 00:01: [io 0x0ca4-0x0ca5] has been reserved
system 00:01: [io 0x0c00-0x0c03] has been reserved
system 00:01: [io 0x02f8-0x02ff] has been reserved
system 00:01: [mem 0x80000000-0x8fffffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0ca2-0x0ca3]
pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [dma 7]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [irq 12]
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:08: [io 0x002e-0x002f]
pnp 00:08: [io 0x004e-0x004f]
pnp 00:08: [io 0x0620-0x065f]
pnp 00:08: [io 0x0680-0x069f]
pnp 00:08: [io 0x0600-0x061f]
pnp 00:08: [io 0x0660-0x067f]
pnp 00:08: [io 0x0300-0x030f]
pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:09: [irq 4]
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:0a: [mem 0xf9af0000-0xf9af0fff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:0b: [bus 40-ff]
pnp 00:0b: [io 0x0000 window]
pnp 00:0b: [io 0x0000 window]
pnp 00:0b: [io 0x0000 window]
pnp 00:0b: [io 0xf000-0xffff window]
pnp 00:0b: [io 0x0000 window]
pnp 00:0b: [io 0x0000 window]
pnp 00:0b: [mem 0x00000000 window]
pnp 00:0b: [mem 0xf9f00000-0xfdffffff window]
pnp 00:0b: [mem 0x00000000 window]
pnp 00:0b: [mem 0x84000000-0x8fffffff window]
pnp 00:0b: [mem 0x00000000 window]
pnp 00:0b: [mem 0x00000000 window]
pnp 00:0b: [mem 0x00000000 window]
pnp 00:0b: [mem 0x00000000 window]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:0c: [mem 0xf9fd0000-0xf9fd0fff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:0d: [mem 0xf9fe0000-0xf9fe0fff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:0e: [mem 0xf9ff0000-0xf9ff0fff]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0003 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:0c.0: BAR 15: assigned [mem 0x90000000-0x900fffff pref]
pci 0000:01:03.0: BAR 6: assigned [mem 0xf9b00000-0xf9b1ffff pref]
pci 0000:01:04.2: BAR 6: assigned [mem 0xf9b20000-0xf9b2ffff pref]
pci 0000:00:09.0: PCI bridge to [bus 01]
pci 0000:00:09.0: bridge window [io 0x2000-0x3fff]
pci 0000:00:09.0: bridge window [mem 0xf9b00000-0xf9cfffff]
pci 0000:00:09.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
pci 0000:08:00.0: BAR 6: assigned [mem 0x90000000-0x9003ffff pref]
pci 0000:00:0c.0: PCI bridge to [bus 08-0a]
pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:0c.0: bridge window [mem 0xf9d00000-0xf9efffff]
pci 0000:00:0c.0: bridge window [mem 0x90000000-0x900fffff pref]
pci 0000:00:0d.0: PCI bridge to [bus 05-07]
pci 0000:00:0e.0: PCI bridge to [bus 02-04]
pci 0000:40:10.0: BAR 15: assigned [mem 0x84000000-0x840fffff pref]
pci 0000:40:0b.0: PCI bridge to [bus 4f-51]
pci 0000:40:0c.0: PCI bridge to [bus 4c-4e]
pci 0000:40:0d.0: PCI bridge to [bus 49-4b]
pci 0000:40:0e.0: PCI bridge to [bus 46-48]
pci 0000:41:01.0: BAR 6: assigned [mem 0x84000000-0x840007ff pref]
pci 0000:41:02.0: BAR 6: assigned [mem 0x84000800-0x84000fff pref]
pci 0000:40:10.0: PCI bridge to [bus 41]
pci 0000:40:10.0: bridge window [mem 0xfa000000-0xfdffffff]
pci 0000:40:10.0: bridge window [mem 0x84000000-0x840fffff pref]
pci 0000:40:11.0: PCI bridge to [bus 42-45]
pci 0000:00:09.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xefff]
pci_bus 0000:00: resource 5 [mem 0x90000000-0xf9efffff]
pci_bus 0000:00: resource 6 [mem 0x80000000-0x83ffffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0xfe000000-0xffffffff]
pci_bus 0000:00: resource 9 [mem 0x880000000-0xfcffffffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf9b00000-0xf9cfffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]
pci_bus 0000:01: resource 4 [io 0x0000-0xefff]
pci_bus 0000:01: resource 5 [mem 0x90000000-0xf9efffff]
pci_bus 0000:01: resource 6 [mem 0x80000000-0x83ffffff]
pci_bus 0000:01: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 8 [mem 0xfe000000-0xffffffff]
pci_bus 0000:01: resource 9 [mem 0x880000000-0xfcffffffff]
pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:08: resource 1 [mem 0xf9d00000-0xf9efffff]
pci_bus 0000:08: resource 2 [mem 0x90000000-0x900fffff pref]
pci_bus 0000:40: resource 4 [io 0xf000-0xffff]
pci_bus 0000:40: resource 5 [mem 0xf9f00000-0xfdffffff]
pci_bus 0000:40: resource 6 [mem 0x84000000-0x8fffffff]
pci_bus 0000:41: resource 1 [mem 0xfa000000-0xfdffffff]
pci_bus 0000:41: resource 2 [mem 0x84000000-0x840fffff pref]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22
ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23
pci 0000:00:0c.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Found enabled HT MSI Mapping
pci 0000:01:03.0: Boot video device
ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17
pci 0000:01:04.4: HCRESET not completed yet!
pci 0000:40:0b.0: Found enabled HT MSI Mapping
pci 0000:40:0c.0: Found enabled HT MSI Mapping
pci 0000:40:0d.0: Found enabled HT MSI Mapping
pci 0000:40:0e.0: Found enabled HT MSI Mapping
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 26748k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 74000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
platform rtc_cmos: registered platform RTC device (no PNP device found)
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1364408032.217:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:0c.0: irq 78 for MSI/MSI-X
pcieport 0000:00:0d.0: irq 79 for MSI/MSI-X
pcieport 0000:00:0e.0: irq 80 for MSI/MSI-X
ioapic: probe of 0000:40:10.1 failed with error -22
ioapic: probe of 0000:40:11.1 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 23, io mem 0xf9ad0000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.6.10-4.fc18.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xf9ae0000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.6.10-4.fc18.x86_64 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: HCRESET not completed yet!
uhci_hcd 0000:01:04.4: irq 17, io base 0x00003800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.6.10-4.fc18.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:01:04.4
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for generic
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Fedora kernel signing key: 7686e1f22bbf511e76885be3fb6c7a462be60dda'
registered taskstats version 1
Magic number: 5:89:242
rtc_cmos rtc_cmos: setting system clock to 2013-03-27 18:13:53 UTC (1364408033)
powernow-k8: Found 1 Dual-Core AMD Opteron(tm) Processor 8220 (8 cpu cores) (version 2.20.00)
powernow-k8: fid 0x14 (2800 MHz), vid 0x8
powernow-k8: fid 0x12 (2600 MHz), vid 0xa
powernow-k8: fid 0x10 (2400 MHz), vid 0xc
powernow-k8: fid 0xe (2200 MHz), vid 0xe
powernow-k8: fid 0xc (2000 MHz), vid 0x10
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
powernow-k8: fid 0x14 (2800 MHz), vid 0x9
powernow-k8: fid 0x12 (2600 MHz), vid 0xb
powernow-k8: fid 0x10 (2400 MHz), vid 0xd
powernow-k8: fid 0xe (2200 MHz), vid 0xf
powernow-k8: fid 0xc (2000 MHz), vid 0x11
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
powernow-k8: fid 0x14 (2800 MHz), vid 0x7
powernow-k8: fid 0x12 (2600 MHz), vid 0x9
powernow-k8: fid 0x10 (2400 MHz), vid 0xb
powernow-k8: fid 0xe (2200 MHz), vid 0xd
powernow-k8: fid 0xc (2000 MHz), vid 0xf
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
powernow-k8: fid 0x14 (2800 MHz), vid 0x7
powernow-k8: fid 0x12 (2600 MHz), vid 0x9
powernow-k8: fid 0x10 (2400 MHz), vid 0xb
powernow-k8: fid 0xe (2200 MHz), vid 0xd
powernow-k8: fid 0xc (2000 MHz), vid 0xf
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
Freeing unused kernel memory: 1036k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1848k freed
Freeing unused kernel memory: 1412k freed
systemd[1]: systemd 195 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; fedora)
systemd[1]: Running in initial RAM disk.
systemd[1]: No hostname configured.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Sockets.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Local File Systems.
usb 3-1: new full-speed USB device number 2 using uhci_hcd
usb 3-1: New USB device found, idVendor=03f0, idProduct=1027
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Virtual Keyboard
usb 3-1: Manufacturer: HP
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb3/3-1/3-1:1.0/input/input1
hid-generic 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb3/3-1/3-1:1.1/input/input2
hid-generic 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
usb 3-2: new full-speed USB device number 3 using uhci_hcd
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
usb 3-2: New USB device found, idVendor=03f0, idProduct=1327
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Virtual Hub
usb 3-2: Manufacturer: HP
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 7 ports detected
usb 1-4: new high-speed USB device number 2 using ehci_hcd
systemd-udevd[179]: starting version 195
usb 1-4: New USB device found, idVendor=0846, idProduct=9030
usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 1-4: Product: WNA1100
usb 1-4: Manufacturer: NETGEAR WNA
usb 1-4: SerialNumber: 12345
usb 1-6: new high-speed USB device number 4 using ehci_hcd
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1008 irq 15
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012)
usb 1-6: New USB device found, idVendor=04b4, idProduct=6560
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
ata1.01: ATAPI: DW-224E-R, C.AC, max UDMA/33
ata1: nv_mode_filter: 0x739f&0xfffff->0x739f, BIOS=0x0 (0x0) ACPI=0x0
ata1.01: configured for UDMA/33
scsi 0:0:1:0: CD-ROM TEAC DW-224E-R C.AC PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sr 0:0:1:0: Attached scsi generic sg0 type 5
ata2: port disabled--ignoring
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 18
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB).
[drm] register mmio base: 0xF9CF0000
[drm] register mmio size: 65536
radeon 0000:01:03.0: VRAM: 128M 0x00000000F0000000 - 0x00000000F7FFFFFF (32M used)
radeon 0000:01:03.0: GTT: 512M 0x00000000D0000000 - 0x00000000EFFFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 16474648 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 32M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCI GART of 512M enabled (table at 0x000000007DC80000).
radeon 0000:01:03.0: WB disabled
radeon 0000:01:03.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xffff88007dc0b000
[drm] Loading R100 Microcode
[drm] radeon: ring at 0x00000000D0001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] VGA-2
[drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
bnx2 0000:41:01.0: eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem fc000000, IRQ 31, node addr 00:18:fe:76:6e:34
[drm] fb mappable at 0xF0040000
[drm] vram apper at 0xF0000000
[drm] size 1081344
[drm] fb depth is 8
[drm] pitch is 1408
fbcon: radeondrmfb (fb0) is primary device
usb 2-5: new low-speed USB device number 2 using ohci_hcd
Console: switching to colour frame buffer device 170x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.24.0 20080528 for 0000:01:03.0 on minor 0
systemd-udevd[223]: renamed network interface eth0 to em1
usb 2-5: New USB device found, idVendor=093a, idProduct=2510
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-5: Product: USB Optical Mouse
usb 2-5: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input3
hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:02.0-5/input0
bnx2 0000:41:02.0: eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem fa000000, IRQ 32, node addr 00:18:fe:76:6e:36
usb 1-6.3: new low-speed USB device number 5 using ehci_hcd
systemd-udevd[220]: renamed network interface eth0 to em2
usb 1-6.3: New USB device found, idVendor=062a, idProduct=0201
usb 1-6.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6.3: Product: USB-compliant keyboard
input: USB-compliant keyboard as /devices/pci0000:00/0000:00:02.1/usb1/1-6/1-6.3/1-6.3:1.0/input/input4
hid-generic 0003:062A:0201.0004: input,hidraw3: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:02.1-6.3/input0
input: USB-compliant keyboard as /devices/pci0000:00/0000:00:02.1/usb1/1-6/1-6.3/1-6.3:1.1/input/input5
hid-generic 0003:062A:0201.0005: input,hiddev0,hidraw4: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:02.1-6.3/input1
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
squashfs: version 4.0 (2009/01/31) Phillip Lougher
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[85]: Received SIGTERM
type=1404 audit(1364408040.997:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 93843 rules.
SELinux: 2048 avtab hash slots, 93843 rules.
SELinux: 9 users, 15 roles, 4356 types, 237 bools, 1 sens, 1024 cats
SELinux: 83 classes, 93843 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
SELinux: initialized (dev loop0, type squashfs), uses xattr
SELinux: initialized (dev loop2, type squashfs), uses xattr
SELinux: initialized (dev dm-0, type ext4), uses xattr
type=1403 audit(1364408042.245:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 1s 368ms 507us.
systemd[1]: Relabelled /dev and /run in 97ms 368us.
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
EXT4-fs (dm-0): re-mounted. Opts: (null)
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
systemd-udevd[421]: starting version 195
systemd-modules-load[435]: Inserted module 'uinput'
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
microcode: AMD CPU family 0xf not supported
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:1a.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:1b.3: Temperature readouts might be wrong - check erratum #141
MCE: In-kernel MCE decoding enabled.
ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16
hpwdt 0000:01:04.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 0/OFF)
hpwdt 0000:01:04.0: HP Watchdog Timer Driver: 1.3.0, timer margin: 30 seconds (nowayout=0).
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ipmi message handler version 39.2
HP CISS Driver (v 3.6.26)
cciss 0000:08:00.0: irq 81 for MSI/MSI-X
cciss 0000:08:00.0: irq 82 for MSI/MSI-X
cciss 0000:08:00.0: irq 83 for MSI/MSI-X
cciss 0000:08:00.0: irq 84 for MSI/MSI-X
cciss 0000:08:00.0: cciss0: at PCI 0000:08:00.0 IRQ 81 using DAC
scsi2 : cciss
IPMI System Interface driver.
ipmi_si 0000:01:04.6: probing via PCI
ipmi_si 0000:01:04.6: [mem 0xf9bf0000-0xf9bf00ff] regsize 1 spacing 1 irq 16
ipmi_si: Adding PCI-specified kcs state machine
ipmi_si: probing via ACPI
ipmi_si 00:02: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf9bf0000, slave address 0x0, irq 16
ipmi_si 0000:01:04.6: Using irq 16
ipmi_si 0000:01:04.6: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
ipmi_si 0000:01:04.6: IPMI kcs interface initialized
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: K8 revF or later detected (node 0).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 0MB
EDAC amd64: MC: 2: 4096MB 3: 0MB
EDAC amd64: MC: 4: 4096MB 5: 0MB
EDAC amd64: MC: 6: 4096MB 7: 0MB
EDAC amd64: CS0: Registered DDR2 RAM
EDAC amd64: CS2: Registered DDR2 RAM
EDAC amd64: CS4: Registered DDR2 RAM
EDAC amd64: CS6: Registered DDR2 RAM
EDAC MC0: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:18.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: K8 revF or later detected (node 1).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 4096MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: CS0: Registered DDR2 RAM
EDAC amd64: CS1: Registered DDR2 RAM
EDAC amd64: CS2: Registered DDR2 RAM
EDAC amd64: CS3: Registered DDR2 RAM
EDAC MC1: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:19.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: K8 revF or later detected (node 2).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 4096MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: CS0: Registered DDR2 RAM
EDAC amd64: CS1: Registered DDR2 RAM
EDAC amd64: CS2: Registered DDR2 RAM
EDAC amd64: CS3: Registered DDR2 RAM
EDAC MC2: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:1a.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: K8 revF or later detected (node 3).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 4096MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: CS0: Registered DDR2 RAM
EDAC amd64: CS1: Registered DDR2 RAM
EDAC amd64: CS2: Registered DDR2 RAM
EDAC amd64: CS3: Registered DDR2 RAM
EDAC MC3: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:1b.2
EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
cfg80211: Calling CRDA to update world regulatory domain
kvm: Nested Virtualization enabled
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 1-4: ath9k_htc: Firmware htc_9271.fw requested
usbcore: registered new interface driver ath9k_htc
usb 1-4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
ath9k_htc 1-4:1.0: ath9k_htc: HTC initialized with 33 credits
ath9k_htc 1-4:1.0: ath9k_htc: FW Version: 1.3
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Atheros AR9271 Rev:1
Registered led device: ath9k_htc-phy0
systemd-journald[436]: Received SIGUSR1
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
iscsi: registered transport (cxgb4i)
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012)
bnx2 0000:41:01.0: em1: Added CNIC device
bnx2 0000:41:02.0: em2: Added CNIC device
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012)
iscsi: registered transport (bnx2i)
scsi3 : Broadcom Offload iSCSI Initiator
scsi4 : Broadcom Offload iSCSI Initiator
iscsi: registered transport (be2iscsi)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
bnx2 0000:41:01.0: em1: register_cnic failed
IPv6: ADDRCONF(NETDEV_UP): em2: link is not ready
bnx2 0000:41:02.0: em2: register_cnic failed
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
usb 2-5: USB disconnect, device number 2
bnx2 0000:41:01.0: em1: NIC Copper Link is Up, 1000 Mbps full duplex
, receive & transmit flow control ON
IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
usb 2-5: new low-speed USB device number 3 using ohci_hcd
usb 2-5: New USB device found, idVendor=093a, idProduct=2510
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-5: Product: USB Optical Mouse
usb 2-5: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input6
hid-generic 0003:093A:2510.0006: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:02.0-5/input0
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.