dmesg - iozone-4k-2g-rw
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.2.1-42-linaro-lt-mx6 (buildd@bukavac) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #42~lt~ci~20120418002039+1334973107~4f923dbb-Ubuntu SMP PREEMPT (Ubuntu 3.2.1-42.42~lt~ci~20120418002039+1334973107~4f923dbb-linaro-lt-mx6 3.2.1)
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Freescale i.MX6 Quad (Device Tree), model: Freescale i.MX6 Quad SABRE Lite Board
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 229376
[ 0.000000] free_area_init_node: node 0, pgdat c08a1900, node_mem_map c0926000
[ 0.000000] Normal zone: 1584 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 162256 pages, LIFO batch:31
[ 0.000000] HighMem zone: 720 pages used for memmap
[ 0.000000] HighMem zone: 64816 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1236000 s10560 r8192 d14016 u32768
[ 0.000000] pcpu-alloc: s10560 r8192 d14016 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227072
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 640MB 256MB = 896MB total
[ 0.000000] Memory: 896104k/896104k available, 152472k reserved, 262144K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xec800000 - 0xf4000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xec000000 ( 704 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0800924 (8163 kB)
[ 0.000000] .init : 0xc0801000 - 0xc0851940 ( 323 kB)
[ 0.000000] .data : 0xc0852000 - 0xc08a4250 ( 329 kB)
[ 0.000000] .bss : 0xc08a4274 - 0xc09259ec ( 518 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:432
[ 0.000000] L310 cache controller enabled
[ 0.000000] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x02070000, Cache size: 1048576 B
[ 0.000000] sched_clock: 32 bits at 8MHz, resolution 121ns, wraps every 520602ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.001411] Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
[ 0.090211] pid_max: default: 32768 minimum: 301
[ 0.090550] Security Framework initialized
[ 0.090626] AppArmor: AppArmor initialized
[ 0.090660] Yama: becoming mindful.
[ 0.090841] Mount-cache hash table entries: 512
[ 0.097309] CPU: Testing write buffer coherency: ok
[ 0.097398] ftrace: allocating 24080 entries in 71 pages
[ 0.135460] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.135602] Calibrating local timer... 396.23MHz.
[ 0.195372] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.195504] Setting up static identity map for 0x105a7560 - 0x105a75a8
[ 0.295933] CPU1: Booted secondary processor
[ 0.335438] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.375968] CPU2: Booted secondary processor
[ 0.415486] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.456010] CPU3: Booted secondary processor
[ 0.495534] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.495592] Brought up 4 CPUs
[ 0.495703] SMP: Total of 4 processors activated (6324.22 BogoMIPS).
[ 0.496934] devtmpfs: initialized
[ 0.503186] print_constraints: dummy:
[ 0.503706] NET: Registered protocol family 16
[ 0.504108] Trying to unpack rootfs image as initramfs...
[ 0.642265] Freeing initrd memory: 1796K
[ 0.651738] gpiochip_find_base: found new base at 224
[ 0.652597] gpiochip_find_base: found new base at 192
[ 0.653419] gpiochip_find_base: found new base at 160
[ 0.654245] gpiochip_find_base: found new base at 128
[ 0.655070] gpiochip_find_base: found new base at 96
[ 0.656031] gpiochip_find_base: found new base at 64
[ 0.656854] gpiochip_find_base: found new base at 32
[ 0.659130] print_constraints: vddpu: 725 1300 mV at 1100 mV
[ 0.659914] print_constraints: cpu: 725 1300 mV at 1100 mV
[ 0.660671] print_constraints: vddsoc: 725 1300 mV at 1200 mV
[ 0.661386] print_constraints: vdd2p5: 2000 2775 mV at 2400 mV
[ 0.662152] print_constraints: vdd1p1: 800 1400 mV at 1100 mV
[ 0.662894] print_constraints: vdd3p0: 2800 3150 mV at 3000 mV
[ 0.670408] audmux_v2 21d8000.audmux: audmux_v2_probe: cannot get clock: 0
[ 0.677257] cpaddr = ec880000 suspend_iram_base=ec82e000
[ 0.677322] No ATAGs?
[ 0.677363] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.677405] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.710320] bio: create slab at 0
[ 0.711692] print_constraints: 2P5V: 2500 mV
[ 0.712145] print_constraints: 3P3V: 3300 mV
[ 0.714989] SCSI subsystem initialized
[ 0.715712] libata version 3.00 loaded.
[ 0.716839] usbcore: registered new interface driver usbfs
[ 0.717300] usbcore: registered new interface driver hub
[ 0.717634] usbcore: registered new device driver usb
[ 0.755830] imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[ 0.775862] imx-ipuv3 imx-ipuv3.1: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[ 0.776978] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.778463] NetLabel: Initializing
[ 0.778491] NetLabel: domain hash size = 128
[ 0.778514] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.778590] NetLabel: unlabeled traffic allowed by default
[ 0.778645] Switching to clocksource mxc_timer1
[ 0.801268] AppArmor: AppArmor Filesystem Enabled
[ 0.831143] NET: Registered protocol family 2
[ 0.831449] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.832205] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.834231] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.835352] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.835384] TCP reno registered
[ 0.835413] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.835470] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.835869] NET: Registered protocol family 1
[ 0.836441] RPC: Registered named UNIX socket transport module.
[ 0.836475] RPC: Registered udp transport module.
[ 0.836502] RPC: Registered tcp transport module.
[ 0.836527] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.837230] i.MXC CPU frequency driver
[ 0.838589] audit: initializing netlink socket (disabled)
[ 0.838658] type=2000 audit(0.790:1): initialized
[ 0.854957] highmem bounce pool size: 64 pages
[ 0.858145] Btrfs loaded
[ 0.858194] msgmni has been set to 1241
[ 0.859827] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.859873] io scheduler noop registered
[ 0.859899] io scheduler deadline registered
[ 0.860037] io scheduler cfq registered (default)
[ 0.863659] mxc_sdc_fb 0.fb: register mxc display driver hdmi
[ 0.863729] mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
[ 0.863788] fbcvt: 1920x1080@60: CVT Name - 2.073M9
[ 0.863944] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9
[ 0.863958] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9
[ 0.888840] imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
[ 0.957285] Console: switching to colour frame buffer device 240x67
[ 0.975360] imx-ipuv3 imx-ipuv3.0: Channel already disabled 10
[ 0.975374] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 10
[ 0.979010] mxc_sdc_fb 1.fb: register mxc display driver hdmi
[ 0.979128] mxc_hdmi mxc_hdmi: Error only one HDMI output support now!
[ 0.979248] mxc_sdc_fb 1.fb: NO mxc display driver found!
[ 0.980152] imx-sdma 20ec000.sdma: loaded firmware 1.1
[ 0.988942] imx-sdma 20ec000.sdma: initialized
[ 0.990405] 21e8000.uart: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX
[ 1.691704] console [ttymxc1] enabled
[ 1.730806] imx-ocotp 21bc000.ocotp: initialized
[ 1.750579] brd: module loaded
[ 1.761595] loop: module loaded
[ 2.371361] No sata disk, enter into PDDQ mode.
[ 2.378031] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 2.392291] m25p80 spi32766.0: sst25vf016b (2048 Kbytes)
[ 2.405389] spi_imx 2008000.ecspi: probed
[ 2.411125] FEC Ethernet Driver
[ 2.437972] fec_enet_mii_bus: probed
[ 2.443267] usbcore: registered new interface driver asix
[ 2.449089] usbcore: registered new interface driver cdc_ether
[ 2.455260] usbcore: registered new interface driver smsc95xx
[ 2.461369] usbcore: registered new interface driver net1080
[ 2.467343] usbcore: registered new interface driver cdc_subset
[ 2.473657] usbcore: registered new interface driver zaurus
[ 2.479377] cdc_ncm: 04-Aug-2011
[ 2.482890] usbcore: registered new interface driver cdc_ncm
[ 2.489303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.496099] mxc-ehci ehci-mxc.1: initializing i.MX USB Controller
[ 2.588744] mxc-ehci ehci-mxc.1: Freescale On-Chip EHCI Host Controller
[ 2.595931] mxc-ehci ehci-mxc.1: new USB bus registered, assigned bus number 1
[ 2.628772] mxc-ehci ehci-mxc.1: irq 72, io mem 0x02184200
[ 2.648751] mxc-ehci ehci-mxc.1: USB 2.0 started, EHCI 1.00
[ 2.654524] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.661459] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.668827] usb usb1: Product: Freescale On-Chip EHCI Host Controller
[ 2.675380] usb usb1: Manufacturer: Linux 3.2.1-42-linaro-lt-mx6 ehci_hcd
[ 2.686555] usb usb1: SerialNumber: ehci-mxc.1
[ 2.696202] hub 1-0:1.0: USB hub found
[ 2.704132] hub 1-0:1.0: 1 port detected
[ 2.714170] usbcore: registered new interface driver cdc_wdm
[ 2.723985] Initializing USB Mass Storage driver...
[ 2.733255] usbcore: registered new interface driver usb-storage
[ 2.743380] USB Mass Storage support registered.
[ 2.752396] usbcore: registered new interface driver libusual
[ 2.762575] usbcore: registered new interface driver usbtest
[ 2.772401] Freescale High-Speed USB SOC Device Controller driver (Apr 20, 2007)
[ 2.785362] egalax_ts 2-0004: egalax_ts: failed to read firmware version
[ 2.796322] egalax_ts: probe of 2-0004 failed with error -5
[ 2.807589] snvs_rtc 20cc000.snvs: rtc core: registered 20cc000.snvs as rtc0
[ 2.819316] i2c /dev entries driver
[ 2.828327] Linux video capture interface: v2.00
[ 2.838015] mxc_v4l2_output v4l2-out.11: V4L2 device registered as video16
[ 2.849616] mxc_v4l2_output v4l2-out.11: V4L2 device registered as video17
[ 2.860987] Driver for 1-wire Dallas network protocol.
[ 2.871784] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
[ 2.885327] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 2.898756] cpuidle: using governor ladder
[ 2.906351] cpuidle: using governor menu
[ 2.906961] sdhci: Secure Digital Host Controller Interface driver
[ 2.906971] sdhci: Copyright(c) Pierre Ossman
[ 2.906979] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.907301] mxc: set GPIO 32 to high trigger
[ 2.907421] sdhci-esdhc-imx 2198000.usdhc: vmmc-supply property in node /soc/aips-bus@02100000/usdhc@02198000 references invalid phandle
[ 2.907437] mmc0: no vmmc regulator found
[ 2.907700] Registered led device: mmc0::
[ 2.909018] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using DMA
[ 2.909140] mxc: set GPIO 198 to low trigger
[ 2.909228] sdhci-esdhc-imx 219c000.usdhc: vmmc-supply property in node /soc/aips-bus@02100000/usdhc@0219c000 references invalid phandle
[ 2.909244] mmc1: no vmmc regulator found
[ 2.909606] Registered led device: mmc1::
[ 2.910903] mmc1: SDHCI controller on 219c000.usdhc [219c000.usdhc] using DMA
[ 2.911867] VPU initialized
[ 2.912544] Registered led device: Heartbeat
[ 2.917486] usbcore: registered new interface driver usbhid
[ 2.917496] usbhid: USB HID core driver
[ 2.918984] mxc_hdmi_soc mxc_hdmi_soc: MXC HDMI Audio
[ 2.921436] sgtl5000 0-000a: VDDD-supply property in node /soc/aips-bus@02100000/i2c@021a0000/sgtl5000@0a references invalid phandle
[ 2.921456] sgtl5000 0-000a: Failed to get supply 'VDDD': -19
[ 2.921804] print_constraints: 0-000a: 850 1600 mV at 1200 mV normal
[ 2.921980] sgtl5000 0-000a: VDDD_LDO-supply property in node /soc/aips-bus@02100000/i2c@021a0000/sgtl5000@0a references invalid phandle
[ 2.922039] sgtl5000 0-000a: Using internal LDO instead of VDDD
[ 2.924800] sgtl5000 0-000a: sgtl5000 revision 17
[ 2.933642] Invalid gpio -1
[ 2.933651] failed to call snd_soc_jack_add_gpios
[ 2.935746] asoc: sgtl5000 202c000.ssi mapping ok
[ 2.937037] input: sgtl5000-audio Headphone Jack as /devices/platform/soc-audio/sound/card0/input0
[ 2.939511] asoc: mxc-hdmi-soc imx-hdmi-soc-dai mapping ok
[ 2.941265] ALSA device list:
[ 2.941274] #0: sgtl5000-audio
[ 2.941281] #1: imx-hdmi-soc
[ 2.941799] oprofile: using arm/armv7-ca9
[ 3.016123] TCP cubic registered
[ 3.016132] Initializing XFRM netlink socket
[ 3.218612] NET: Registered protocol family 10
[ 3.228027] IPv6 over IPv4 tunneling driver
[ 3.237378] NET: Registered protocol family 17
[ 3.248051] NET: Registered protocol family 15
[ 3.258635] lib80211: common routines for IEEE802.11 drivers
[ 3.268382] lib80211_crypt: registered algorithm 'NULL'
[ 3.268395] lib80211_crypt: registered algorithm 'WEP'
[ 3.268405] lib80211_crypt: registered algorithm 'CCMP'
[ 3.268416] lib80211_crypt: registered algorithm 'TKIP'
[ 3.268425] Registering the dns_resolver key type
[ 3.277236] VFP support v0.3:
[ 3.308750] usb 1-1: new high-speed USB device number 2 using mxc-ehci
[ 3.358450] implementor 41 architecture 3 part 30 variant 9 rev 4
[ 3.368664] ThumbEE CPU extension supported.
[ 3.377038] Registering SWP/SWPB emulation handler
[ 3.469543] snvs_rtc 20cc000.snvs: setting system clock to 1970-01-01 00:00:00 UTC (0)
[ 3.481971] usb 1-1: New USB device found, idVendor=0424, idProduct=2513
[ 3.491373] Freeing init memory: 320K
[ 3.501763] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.514878] hub 1-1:1.0: USB hub found
[ 3.523605] hub 1-1:1.0: 3 ports detected
[ 3.578067] udevd[751]: starting version 175
[ 4.279564] mmc0: new high speed SDHC card at address b368
[ 4.289939] mmcblk0: mmc0:b368 00000 7.51 GiB
[ 4.300874] mmcblk0: p1 p2 p3
[ 5.090900] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[ 8.417831] udevd[1021]: starting version 175
[ 9.189507] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro
[ 11.052073] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9
[ 11.052086] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9
[ 11.252228] init: failsafe main process (1239) killed by TERM signal
[ 12.052079] Bluetooth: Core ver 2.16
[ 12.052452] NET: Registered protocol family 31
[ 12.052467] Bluetooth: HCI device and connection manager initialized
[ 12.052484] Bluetooth: HCI socket layer initialized
[ 12.253283] init: hybrid-gfx main process (1397) terminated with status 1
[ 13.362976] init: tty1 main process (1441) killed by TERM signal
[ 32.355223] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:06, irq=-1)
[ 32.356186] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.503556] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9
[ 33.503569] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9
[ 37.349095] PHY: 1:06 - Link is Up - 1000/Full
[ 37.350053] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 47.478731] eth0: no IPv6 routers present
[ 55.873561] warning: process `colord' used the deprecated sysctl system call with 8.1.2.
[ 73.440841] init: ureadahead main process (917) killed by TERM signal
[ 666.923293] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9
[ 666.923356] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9