dmesg - fs-mark-01-test1-1mb
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.2.1-42-linaro-lt-mx6 (buildd@bukavac) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #42~lt~ci~20120418002039+1334973107~4f923dbb-Ubuntu SMP PREEMPT (Ubuntu 3.2.1-42.42~lt~ci~20120418002039+1334973107~4f923dbb-linaro-lt-mx6 3.2.1)
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Freescale i.MX6 Quad (Device Tree), model: Freescale i.MX6 Quad SABRE Lite Board
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 229376
[ 0.000000] free_area_init_node: node 0, pgdat c08a1900, node_mem_map c0926000
[ 0.000000] Normal zone: 1584 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 162256 pages, LIFO batch:31
[ 0.000000] HighMem zone: 720 pages used for memmap
[ 0.000000] HighMem zone: 64816 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1236000 s10560 r8192 d14016 u32768
[ 0.000000] pcpu-alloc: s10560 r8192 d14016 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227072
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 640MB 256MB = 896MB total
[ 0.000000] Memory: 896104k/896104k available, 152472k reserved, 262144K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xec800000 - 0xf4000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xec000000 ( 704 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0800924 (8163 kB)
[ 0.000000] .init : 0xc0801000 - 0xc0851940 ( 323 kB)
[ 0.000000] .data : 0xc0852000 - 0xc08a4250 ( 329 kB)
[ 0.000000] .bss : 0xc08a4274 - 0xc09259ec ( 518 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:432
[ 0.000000] L310 cache controller enabled
[ 0.000000] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x02070000, Cache size: 1048576 B
[ 0.000000] sched_clock: 32 bits at 8MHz, resolution 121ns, wraps every 520602ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.001413] Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
[ 0.090211] pid_max: default: 32768 minimum: 301
[ 0.090552] Security Framework initialized
[ 0.090626] AppArmor: AppArmor initialized
[ 0.090662] Yama: becoming mindful.
[ 0.090840] Mount-cache hash table entries: 512
[ 0.097296] CPU: Testing write buffer coherency: ok
[ 0.097387] ftrace: allocating 24080 entries in 71 pages
[ 0.135469] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.135609] Calibrating local timer... 396.22MHz.
[ 0.195379] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.195511] Setting up static identity map for 0x105a7560 - 0x105a75a8
[ 0.295935] CPU1: Booted secondary processor
[ 0.335440] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.375970] CPU2: Booted secondary processor
[ 0.415485] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.456007] CPU3: Booted secondary processor
[ 0.495530] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.495580] Brought up 4 CPUs
[ 0.495692] SMP: Total of 4 processors activated (6324.22 BogoMIPS).
[ 0.496921] devtmpfs: initialized
[ 0.503182] print_constraints: dummy:
[ 0.503710] NET: Registered protocol family 16
[ 0.504108] Trying to unpack rootfs image as initramfs...
[ 0.642274] Freeing initrd memory: 1796K
[ 0.651795] gpiochip_find_base: found new base at 224
[ 0.652649] gpiochip_find_base: found new base at 192
[ 0.653460] gpiochip_find_base: found new base at 160
[ 0.654295] gpiochip_find_base: found new base at 128
[ 0.655128] gpiochip_find_base: found new base at 96
[ 0.656026] gpiochip_find_base: found new base at 64
[ 0.656861] gpiochip_find_base: found new base at 32
[ 0.659140] print_constraints: vddpu: 725 1300 mV at 1100 mV
[ 0.659916] print_constraints: cpu: 725 1300 mV at 1100 mV
[ 0.660657] print_constraints: vddsoc: 725 1300 mV at 1200 mV
[ 0.661366] print_constraints: vdd2p5: 2000 2775 mV at 2400 mV
[ 0.662134] print_constraints: vdd1p1: 800 1400 mV at 1100 mV
[ 0.662886] print_constraints: vdd3p0: 2800 3150 mV at 3000 mV
[ 0.670395] audmux_v2 21d8000.audmux: audmux_v2_probe: cannot get clock: 0
[ 0.676996] cpaddr = ec880000 suspend_iram_base=ec82e000
[ 0.677061] No ATAGs?
[ 0.677102] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.677144] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.710674] bio: create slab at 0
[ 0.712044] print_constraints: 2P5V: 2500 mV
[ 0.712509] print_constraints: 3P3V: 3300 mV
[ 0.715349] SCSI subsystem initialized
[ 0.716095] libata version 3.00 loaded.
[ 0.717220] usbcore: registered new interface driver usbfs
[ 0.717680] usbcore: registered new interface driver hub
[ 0.718015] usbcore: registered new device driver usb
[ 0.755767] imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[ 0.775774] imx-ipuv3 imx-ipuv3.1: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[ 0.776876] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.778334] NetLabel: Initializing
[ 0.778366] NetLabel: domain hash size = 128
[ 0.778389] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.778469] NetLabel: unlabeled traffic allowed by default
[ 0.778528] Switching to clocksource mxc_timer1
[ 0.801060] AppArmor: AppArmor Filesystem Enabled
[ 0.830343] NET: Registered protocol family 2
[ 0.830633] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.831414] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.833382] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.834502] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.834534] TCP reno registered
[ 0.834564] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.834620] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.835034] NET: Registered protocol family 1
[ 0.835609] RPC: Registered named UNIX socket transport module.
[ 0.835649] RPC: Registered udp transport module.
[ 0.835674] RPC: Registered tcp transport module.
[ 0.835700] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.836396] i.MXC CPU frequency driver
[ 0.837771] audit: initializing netlink socket (disabled)
[ 0.837843] type=2000 audit(0.790:1): initialized
[ 0.854068] highmem bounce pool size: 64 pages
[ 0.857240] Btrfs loaded
[ 0.857291] msgmni has been set to 1241
[ 0.858837] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.858886] io scheduler noop registered
[ 0.858911] io scheduler deadline registered
[ 0.859048] io scheduler cfq registered (default)
[ 0.862731] mxc_sdc_fb 0.fb: register mxc display driver hdmi
[ 0.862803] mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
[ 0.862862] fbcvt: 1920x1080@60: CVT Name - 2.073M9
[ 0.863018] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9
[ 0.863034] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9
[ 0.888699] imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
[ 0.957145] Console: switching to colour frame buffer device 240x67
[ 0.975240] imx-ipuv3 imx-ipuv3.0: Channel already disabled 10
[ 0.975255] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 10
[ 0.978925] mxc_sdc_fb 1.fb: register mxc display driver hdmi
[ 0.979042] mxc_hdmi mxc_hdmi: Error only one HDMI output support now!
[ 0.979161] mxc_sdc_fb 1.fb: NO mxc display driver found!
[ 0.980118] imx-sdma 20ec000.sdma: loaded firmware 1.1
[ 0.988702] imx-sdma 20ec000.sdma: initialized
[ 0.990164] 21e8000.uart: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX
[ 1.691417] console [ttymxc1] enabled
[ 1.721021] imx-ocotp 21bc000.ocotp: initialized
[ 1.740429] brd: module loaded
[ 1.751243] loop: module loaded
[ 2.361902] No sata disk, enter into PDDQ mode.
[ 2.368568] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 2.382781] m25p80 spi32766.0: sst25vf016b (2048 Kbytes)
[ 2.395727] spi_imx 2008000.ecspi: probed
[ 2.401471] FEC Ethernet Driver
[ 2.427826] fec_enet_mii_bus: probed
[ 2.433067] usbcore: registered new interface driver asix
[ 2.438834] usbcore: registered new interface driver cdc_ether
[ 2.445007] usbcore: registered new interface driver smsc95xx
[ 2.451191] usbcore: registered new interface driver net1080
[ 2.457164] usbcore: registered new interface driver cdc_subset
[ 2.463444] usbcore: registered new interface driver zaurus
[ 2.469242] cdc_ncm: 04-Aug-2011
[ 2.472766] usbcore: registered new interface driver cdc_ncm
[ 2.479218] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.486015] mxc-ehci ehci-mxc.1: initializing i.MX USB Controller
[ 2.578627] mxc-ehci ehci-mxc.1: Freescale On-Chip EHCI Host Controller
[ 2.585826] mxc-ehci ehci-mxc.1: new USB bus registered, assigned bus number 1
[ 2.618659] mxc-ehci ehci-mxc.1: irq 72, io mem 0x02184200
[ 2.638648] mxc-ehci ehci-mxc.1: USB 2.0 started, EHCI 1.00
[ 2.644429] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.651363] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.658726] usb usb1: Product: Freescale On-Chip EHCI Host Controller
[ 2.665279] usb usb1: Manufacturer: Linux 3.2.1-42-linaro-lt-mx6 ehci_hcd
[ 2.676407] usb usb1: SerialNumber: ehci-mxc.1
[ 2.686003] hub 1-0:1.0: USB hub found
[ 2.693983] hub 1-0:1.0: 1 port detected
[ 2.704024] usbcore: registered new interface driver cdc_wdm
[ 2.713839] Initializing USB Mass Storage driver...
[ 2.723135] usbcore: registered new interface driver usb-storage
[ 2.733274] USB Mass Storage support registered.
[ 2.742291] usbcore: registered new interface driver libusual
[ 2.752464] usbcore: registered new interface driver usbtest
[ 2.762295] Freescale High-Speed USB SOC Device Controller driver (Apr 20, 2007)
[ 2.775276] egalax_ts 2-0004: egalax_ts: failed to read firmware version
[ 2.786259] egalax_ts: probe of 2-0004 failed with error -5
[ 2.797537] snvs_rtc 20cc000.snvs: rtc core: registered 20cc000.snvs as rtc0
[ 2.809284] i2c /dev entries driver
[ 2.818326] Linux video capture interface: v2.00
[ 2.828022] mxc_v4l2_output v4l2-out.11: V4L2 device registered as video16
[ 2.839632] mxc_v4l2_output v4l2-out.11: V4L2 device registered as video17
[ 2.851003] Driver for 1-wire Dallas network protocol.
[ 2.861803] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
[ 2.875351] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 2.888800] cpuidle: using governor ladder
[ 2.896399] cpuidle: using governor menu
[ 2.904369] sdhci: Secure Digital Host Controller Interface driver
[ 2.914082] sdhci: Copyright(c) Pierre Ossman
[ 2.921899] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.931350] mxc: set GPIO 32 to high trigger
[ 2.931477] sdhci-esdhc-imx 2198000.usdhc: vmmc-supply property in node /soc/aips-bus@02100000/usdhc@02198000 references invalid phandle
[ 2.943755] mmc0: no vmmc regulator found
[ 2.955298] Registered led device: mmc0::
[ 2.956588] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using DMA
[ 2.967484] mxc: set GPIO 198 to low trigger
[ 2.967581] sdhci-esdhc-imx 219c000.usdhc: vmmc-supply property in node /soc/aips-bus@02100000/usdhc@0219c000 references invalid phandle
[ 2.979854] mmc1: no vmmc regulator found
[ 2.991706] Registered led device: mmc1::
[ 2.992994] mmc1: SDHCI controller on 219c000.usdhc [219c000.usdhc] using DMA
[ 3.004882] VPU initialized
[ 3.012116] Registered led device: Heartbeat
[ 3.017158] usbcore: registered new interface driver usbhid
[ 3.026557] usbhid: USB HID core driver
[ 3.034173] usb 1-1: new high-speed USB device number 2 using mxc-ehci
[ 3.035609] mxc_hdmi_soc mxc_hdmi_soc: MXC HDMI Audio
[ 3.038160] sgtl5000 0-000a: VDDD-supply property in node /soc/aips-bus@02100000/i2c@021a0000/sgtl5000@0a references invalid phandle
[ 3.038180] sgtl5000 0-000a: Failed to get supply 'VDDD': -19
[ 3.038533] print_constraints: 0-000a: 850 1600 mV at 1200 mV normal
[ 3.038742] sgtl5000 0-000a: VDDD_LDO-supply property in node /soc/aips-bus@02100000/i2c@021a0000/sgtl5000@0a references invalid phandle
[ 3.038803] sgtl5000 0-000a: Using internal LDO instead of VDDD
[ 3.118374] sgtl5000 0-000a: sgtl5000 revision 17
[ 3.135943] Invalid gpio -1
[ 3.142838] failed to call snd_soc_jack_add_gpios
[ 3.152444] asoc: sgtl5000 202c000.ssi mapping ok
[ 3.162807] input: sgtl5000-audio Headphone Jack as /devices/platform/soc-audio/sound/card0/input0
[ 3.178243] asoc: mxc-hdmi-soc imx-hdmi-soc-dai mapping ok
[ 3.194027] ALSA device list:
[ 3.201132] #0: sgtl5000-audio
[ 3.208436] #1: imx-hdmi-soc
[ 3.216087] oprofile: using arm/armv7-ca9
[ 3.292771] TCP cubic registered
[ 3.300231] Initializing XFRM netlink socket
[ 3.338739] usb 1-1: New USB device found, idVendor=0424, idProduct=2513
[ 3.349733] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.362019] hub 1-1:1.0: USB hub found
[ 3.370228] hub 1-1:1.0: 3 ports detected
[ 3.401256] NET: Registered protocol family 10
[ 3.414792] IPv6 over IPv4 tunneling driver
[ 3.428177] NET: Registered protocol family 17
[ 3.436832] NET: Registered protocol family 15
[ 3.445419] lib80211: common routines for IEEE802.11 drivers
[ 3.455219] lib80211_crypt: registered algorithm 'NULL'
[ 3.455231] lib80211_crypt: registered algorithm 'WEP'
[ 3.455242] lib80211_crypt: registered algorithm 'CCMP'
[ 3.455251] lib80211_crypt: registered algorithm 'TKIP'
[ 3.455262] Registering the dns_resolver key type
[ 3.464131] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 3.546308] ThumbEE CPU extension supported.
[ 3.546334] Registering SWP/SWPB emulation handler
[ 3.637317] snvs_rtc 20cc000.snvs: setting system clock to 1970-01-01 00:00:00 UTC (0)
[ 3.667318] Freeing init memory: 320K
[ 3.759082] udevd[752]: starting version 175
[ 4.268685] mmc0: new high speed SDHC card at address b368
[ 4.279259] mmcblk0: mmc0:b368 00000 7.51 GiB
[ 4.292624] mmcblk0: p1 p2 p3
[ 5.079843] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[ 8.567624] udevd[1023]: starting version 175
[ 8.938708] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro
[ 12.436732] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9
[ 12.436764] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9
[ 13.164733] init: failsafe main process (1272) killed by TERM signal
[ 17.243687] init: alsa-restore main process (1366) terminated with status 99
[ 17.246091] init: hybrid-gfx main process (1379) terminated with status 1
[ 17.406510] Bluetooth: Core ver 2.16
[ 17.406614] NET: Registered protocol family 31
[ 17.406628] Bluetooth: HCI device and connection manager initialized
[ 17.406643] Bluetooth: HCI socket layer initialized
[ 17.538050] init: tty1 main process (1422) killed by TERM signal
[ 27.804910] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:06, irq=-1)
[ 27.805988] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.580331] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9
[ 29.580344] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9
[ 43.798971] PHY: 1:06 - Link is Up - 1000/Full
[ 43.799865] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 54.588635] eth0: no IPv6 routers present
[ 75.562762] warning: process `colord' used the deprecated sysctl system call with 8.1.2.
[ 661.656677] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9
[ 661.656743] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9