dmesg - XubuntVboxK3.8.3Custom
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.3 (root@okik-VirtualBox) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-22ubuntu4) ) #4 SMP Sun Mar 17 16:38:22 CET 2013 (Ubuntu 3.8.0-13.22-generic 3.8.3)
Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.3 root=/dev/sda6 ro vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] ACPI data
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR variable ranges disabled:
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
CPU MTRRs all blank - virtualized system.
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x7ffeffff]
[mem 0x00000000-0x7fdfffff] page 2M
[mem 0x7fe00000-0x7ffeffff] page 4k
kernel direct mapping tables up to 0x7ffeffff @ [mem 0x1fffc000-0x1fffffff]
ACPI: RSDP 00000000000e0000 00024 (v02 VBOX )
ACPI: XSDT 000000007fff0040 0004C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 000000007fff0110 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 000000007fff0540 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS 000000007fff0240 00040
ACPI: APIC 000000007fff0280 0006C (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
ACPI: HPET 000000007fff02f0 00038 (v01 VBOX VBOXHPET 00000001 ASL 00000061)
ACPI: MCFG 000000007fff0330 0003C (v01 VBOX VBOXMCFG 00000001 ASL 00000061)
ACPI: SSDT 000000007fff0370 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007ffeffff]
Initmem setup node 0 [mem 0x00000000-0x7ffeffff]
NODE_DATA [mem 0x7ffee000-0x7ffeffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0x7ffeffff]
On node 0 totalpages: 524159
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 8128 pages used for memmap
DMA32 zone: 512048 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
e820: [mem 0x80000000-0xfffbffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s78592 r8192 d23808 u524288
pcpu-alloc: s78592 r8192 d23808 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515961
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.3 root=/dev/sda6 ro vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Memory: 2056108k/2097088k available (3935k kernel code, 452k absent, 40528k reserved, 2241k data, 492k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 8
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:4352 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 2453.023 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4908.46 BogoMIPS (lpj=8176743)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 0 MCE banks
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20121018
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
mce: CPU supports 0 MCE banks
smpboot: Booting Node 0, Processors #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 437121 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
mce: CPU supports 0 MCE banks
#2 #3 OK
mce: CPU supports 0 MCE banks
Brought up 4 CPUs
smpboot: Total of 4 processors activated (19632.85 BogoMIPS)
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xdc000000-0xdfffffff] (base 0xdc000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xdc000000-0xdfffffff] (base 0xdc000000)
PCI: MMCONFIG at [mem 0xdc000000-0xdfffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci_root PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci_root PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
pci_root PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xffdfffff]
pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
pci 0000:00:03.0: reg 10: [mem 0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 18: [io 0xd000-0xd007]
pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
pci 0000:00:04.0: reg 10: [io 0xd020-0xd03f]
pci 0000:00:04.0: reg 14: [mem 0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff pref]
pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
pci 0000:00:18.0: [8086:2448] type 01 class 0x060401
pci 0000:00:19.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io 0x8000-0x807f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.1: [8086:7111] type 00 class 0x01018a
pci 0000:00:1f.1: reg 20: [io 0xe000-0xe00f]
pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xe010-0xe017]
pci 0000:00:1f.2: reg 14: [io 0xe018-0xe01b]
pci 0000:00:1f.2: reg 18: [io 0xe020-0xe027]
pci 0000:00:1f.2: reg 1c: [io 0xe028-0xe02b]
pci 0000:00:1f.2: reg 20: [io 0xe030-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xf0900000-0xf0901fff]
pci 0000:00:18.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:18.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:18.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:18.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:18.0: bridge window [mem 0x80000000-0xffdfffff] (subtractive decode)
pci 0000:00:19.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:19.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:19.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:19.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:19.0: bridge window [mem 0x80000000-0xffdfffff] (subtractive decode)
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11), disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *9 10 11), disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 10 *11), disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11), disabled.
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:18.0: PCI bridge to [bus 01]
pci 0000:00:19.0: PCI bridge to [bus 02]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xffdfffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x80000000-0xffdfffff]
pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 7 [mem 0x80000000-0xffdfffff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
microcode: CPU0 sig=0x306a9, pf=0x1, revision=0x0
microcode: CPU1 sig=0x306a9, pf=0x1, revision=0x0
microcode: CPU2 sig=0x306a9, pf=0x1, revision=0x0
microcode: CPU3 sig=0x306a9, pf=0x1, revision=0x0
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1363534923.246:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
JFS: nTxBlock = 8192, nTxLock = 65536
msgmni has been set to 4015
alg: No test for stdrng (krng)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and executable
uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
intel_idle: does not run on family 6 model 58
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
intel_rng: FWH not detected
ACPI: Battery Slot [BAT0] (battery present)
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag only ccc
scsi0 : ahci
ata1: SATA max UDMA/133 abar m8192@0xf0900000 port 0xf0900100 irq 40
ata_piix 0000:00:1f.1: version 2.13
scsi1 : ata_piix
scsi2 : ata_piix
ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata3.00: configured for UDMA/33
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata1.00: 134217728 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 134217728 512-byte logical blocks: (68.7 GB/64.0 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:ed:5d:ae
e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP: cubic registered
NET: Registered protocol family 17
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: dc0586a8f4705515c402f5f6b905c95f4c24e0f4'
registered taskstats version 1
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
Key type encrypted registered
rtc_cmos 00:04: setting system clock to 2013-03-17 15:42:04 UTC (1363534924)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
VFS: Mounted root (jfs filesystem) readonly on device 8:6.
devtmpfs: mounted
Freeing unused kernel memory: 492k freed
init: mounted-proc main process (90) terminated with status 1
udevd[177]: starting version 175
Disabling lock debugging due to kernel taint
input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input4
vboxguest: major 0, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
vboxguest: Successfully loaded version 4.2.10 (interface 0x00010004)
sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
init: udev-fallback-graphics main process (430) terminated with status 1
Adding 2097148k swap on /dev/sda5. Priority:-1 extents:1 across:2097148k
init: failsafe main process (472) killed by TERM signal
vboxsf: Successfully loaded version 4.2.10 (interface 0x00010004)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
init: bluetooth main process (578) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (682) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (718) terminated with status 1
init: bluetooth main process ended, respawning
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
init: bluetooth main process (782) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (852) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (887) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (912) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (935) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (970) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (1013) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (1049) terminated with status 1
init: bluetooth respawning too fast, stopped
init: plymouth-stop pre-start process (1140) terminated with status 1
fuse init (API version 7.20)
hrtimer: interrupt took 116617684 ns