dmesg - ooki-2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfe8ffff] usable
BIOS-e820: [mem 0x00000000cfe90000-0x00000000cfee2fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
DMI 2.5 present.
DMI: Shuttle Inc SG31/FG31, BIOS 6.00 PG 06/22/2010
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x130000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 100000000 mask FE0000000 write-back
1 base 120000000 mask FF0000000 write-back
2 base 000000000 mask F80000000 write-back
3 base 080000000 mask FC0000000 write-back
4 base 0C0000000 mask FF0000000 write-back
5 base 0CFF00000 mask FFFF00000 uncachable
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 4GB, range: 512MB, type WB
reg 1, base: 4608MB, range: 256MB, type WB
reg 2, base: 0GB, range: 2GB, type WB
reg 3, base: 2GB, range: 1GB, type WB
reg 4, base: 3GB, range: 256MB, type WB
reg 5, base: 3327MB, range: 1MB, type UC
total RAM covered: 4095M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3327MB, range: 1MB, type UC
reg 4, base: 4GB, range: 512MB, type WB
reg 5, base: 4608MB, range: 256MB, type WB
e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000f3670-0x000f367f] mapped at [c00f3670]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x36334000-0x37191fff]
ACPI: RSDP 000f7960 00014 (v00 Shuttl)
ACPI: RSDT cfee3000 0003C (v01 Shuttl Shuttle 42302E31 AWRD 00000000)
ACPI: FACP cfee3080 00074 (v01 Shuttl Shuttle 42302E31 AWRD 00000000)
ACPI: DSDT cfee3100 04A16 (v01 SHUTTL SG31V30 00001000 MSFT 03000000)
ACPI: FACS cfe90000 00040
ACPI: HPET cfee7c00 00038 (v01 Shuttl Shuttle 42302E31 AWRD 00000098)
ACPI: MCFG cfee7c40 0003C (v01 Shuttl Shuttle 42302E31 AWRD 00000000)
ACPI: SLIC cfee7c80 00176 (v01 Shuttl Shuttle 42302E31 AWRD 00000000)
ACPI: APIC cfee7b40 00084 (v01 Shuttl Shuttle 42302E31 AWRD 00000000)
ACPI: SSDT cfee88a0 007EF (v01 PmRef CpuPm 00003000 INTL 20041203)
ACPI: Local APIC address 0xfee00000
3972MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0xcfe8ffff]
node 0: [mem 0x00000000-0x2fffffff]
On node 0 totalpages: 1048095
free_area_init_node: node 0, pgdat c18a0840, node_mem_map f3d34200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 7945 pages used for memmap
HighMem zone: 811913 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bb3000 s34176 r0 d23168 u57344
pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038366
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
allocated 9961344 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00130000)
Memory: 4117320k/4980736k available (5956k kernel code, 75060k reserved, 2928k data, 756k init, 3279432k highmem)
virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc18ae000 - 0xc196b000 ( 756 kB)
.data : 0xc15d1358 - 0xc18ad6c0 (2928 kB)
.text : 0xc1000000 - 0xc15d1358 (5956 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f740a000 soft=f740c000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3010.434 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6020.86 BogoMIPS (lpj=12041736)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 24585 entries in 49 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz stepping 0a
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f7506000 soft=f7510000
Initializing CPU#1
Booting Node 0, Processors #1
CPU 2 irqstacks, hard=f751a000 soft=f751c000
Initializing CPU#2
#2
CPU 3 irqstacks, hard=f7526000 soft=f7530000
#3 Ok.
Initializing CPU#3
Brought up 4 CPUs
Total of 4 processors activated (24083.47 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcfe90000-0xcfee2fff] (339968 bytes)
dummy:
RTC time: 17:27:04, date: 03/09/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: SSDT cfee7e40 0028B (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0028B (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
ACPI: SSDT cfee8360 001B3 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001B3 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
ACPI: SSDT cfee8520 001B3 (v01 PmRef Cpu2Ist 00003000 INTL 20041203)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001B3 (v01 PmRef Cpu2Ist 00003000 INTL 20041203)
ACPI: SSDT cfee86e0 001B3 (v01 PmRef Cpu3Ist 00003000 INTL 20041203)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001B3 (v01 PmRef Cpu3Ist 00003000 INTL 20041203)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: >host bridge window [mem 0xcff00000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0xcff00000-0xfebfffff]
pci 0000:00:00.0: >[8086:29c0] type 00 class 0x060000
pci 0000:00:01.0: >[8086:29c1] type 01 class 0x060400
pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: >[8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: >reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: >[8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: >[8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: >[8086:27d4] type 01 class 0x060400
pci 0000:00:1c.2: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: >[8086:27d6] type 01 class 0x060400
pci 0000:00:1c.3: >PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: >[8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: >reg 20: [io 0xff00-0xff1f]
pci 0000:00:1d.1: >[8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: >reg 20: [io 0xfe00-0xfe1f]
pci 0000:00:1d.2: >[8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: >reg 20: [io 0xfd00-0xfd1f]
pci 0000:00:1d.3: >[8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: >reg 20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.7: >[8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: >reg 10: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:1d.7: >PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: >[8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: >[8086:27b8] type 00 class 0x060100
pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 001f)
pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 3 PIO at 0310 (mask 001f)
pci 0000:00:1f.1: >[8086:27df] type 00 class 0x01018a
pci 0000:00:1f.1: >reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: >reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: >reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: >reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: >reg 20: [io 0xfb00-0xfb0f]
pci 0000:00:1f.2: >[8086:27c0] type 00 class 0x01018f
pci 0000:00:1f.2: >reg 10: [io 0xfa00-0xfa07]
pci 0000:00:1f.2: >reg 14: [io 0xf900-0xf903]
pci 0000:00:1f.2: >reg 18: [io 0xf800-0xf807]
pci 0000:00:1f.2: >reg 1c: [io 0xf700-0xf703]
pci 0000:00:1f.2: >reg 20: [io 0xf600-0xf60f]
pci 0000:00:1f.2: >PME# supported from D3hot
pci 0000:00:1f.3: >[8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: >reg 20: [io 0x0500-0x051f]
pci 0000:01:00.0: >[1002:6819] type 00 class 0x030000
pci 0000:01:00.0: >reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: >reg 18: [mem 0xfd680000-0xfd6bffff 64bit]
pci 0000:01:00.0: >reg 20: [io 0xee00-0xeeff]
pci 0000:01:00.0: >reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: >supports D1 D2
pci 0000:01:00.0: >PME# supported from D1 D2 D3hot
pci 0000:01:00.1: >[1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: >reg 10: [mem 0xfd6fc000-0xfd6fffff 64bit]
pci 0000:01:00.1: >supports D1 D2
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: > bridge window [mem 0xfd600000-0xfd6fffff]
pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
pci 0000:00:1c.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: > bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.0: > bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:03:00.0: >[11ab:4380] type 00 class 0x020000
pci 0000:03:00.0: >reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
pci 0000:03:00.0: >reg 18: [io 0xce00-0xceff]
pci 0000:03:00.0: >reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: >supports D1 D2
pci 0000:03:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
pci 0000:00:1c.1: > bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.1: > bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:1c.1: > bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:1c.2: >PCI bridge to [bus 04-04]
pci 0000:00:1c.2: > bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.2: > bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:1c.2: > bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:00:1c.3: >PCI bridge to [bus 05-05]
pci 0000:00:1c.3: > bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.3: > bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:1c.3: > bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
pci 0000:06:09.0: >[10ec:8169] type 00 class 0x020000
pci 0000:06:09.0: >reg 10: [io 0xac00-0xacff]
pci 0000:06:09.0: >reg 14: [mem 0xfd5ff000-0xfd5ff0ff]
pci 0000:06:09.0: >reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:06:09.0: >supports D1 D2
pci 0000:06:09.0: >PME# supported from D1 D2 D3hot D3cold
pci 0000:06:0a.0: >[1106:3044] type 00 class 0x0c0010
pci 0000:06:0a.0: >reg 10: [mem 0xfd5fe000-0xfd5fe7ff]
pci 0000:06:0a.0: >reg 14: [io 0xaf00-0xaf7f]
pci 0000:06:0a.0: >supports D2
pci 0000:06:0a.0: >PME# supported from D2 D3hot D3cold
pci 0000:00:1e.0: >PCI bridge to [bus 06-06] (subtractive decode)
pci 0000:00:1e.0: > bridge window [io 0xa000-0xafff]
pci 0000:00:1e.0: > bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:1e.0: > bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
pci 0000:00:1e.0: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: >on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfe90000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000dffff window]
pnp 00:00: >[mem 0xcff00000-0xfebfffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[io 0x0010-0x001f]
pnp 00:01: >[io 0x0022-0x003f]
pnp 00:01: >[io 0x0044-0x005f]
pnp 00:01: >[io 0x0062-0x0063]
pnp 00:01: >[io 0x0065-0x006f]
pnp 00:01: >[io 0x0074-0x007f]
pnp 00:01: >[io 0x0091-0x0093]
pnp 00:01: >[io 0x00a2-0x00bf]
pnp 00:01: >[io 0x00e0-0x00ef]
pnp 00:01: >[io 0x04d0-0x04d1]
pnp 00:01: >[io 0x0800-0x087f]
pnp 00:01: >[io 0x0880-0x088f]
system 00:01: >[io 0x04d0-0x04d1] has been reserved
system 00:01: >[io 0x0800-0x087f] has been reserved
system 00:01: >[io 0x0880-0x088f] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: >[dma 4]
pnp 00:02: >[io 0x0000-0x000f]
pnp 00:02: >[io 0x0080-0x0090]
pnp 00:02: >[io 0x0094-0x009f]
pnp 00:02: >[io 0x00c0-0x00df]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: >[irq 0 disabled]
pnp 00:03: >[irq 8]
pnp 00:03: >[mem 0xfed00000-0xfed003ff]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: >[io 0x0070-0x0073]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: >[io 0x0061]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: >[io 0x00f0-0x00ff]
pnp 00:06: >[irq 13]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: >[io 0x03f8-0x03ff]
pnp 00:07: >[irq 4]
pnp 00:07: >Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: >[io 0x02f8-0x02ff]
pnp 00:08: >[irq 3]
pnp 00:08: >Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: >[io 0x0378-0x037f]
pnp 00:09: >[io 0x0778-0x077b]
pnp 00:09: >[irq 7]
pnp 00:09: >[dma 3]
pnp 00:09: >Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:0a: >[irq 12]
pnp 00:0a: >Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:0b: >[io 0x0060]
pnp 00:0b: >[io 0x0064]
pnp 00:0b: >[irq 1]
pnp 00:0b: >Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0c: >[io 0x0400-0x04bf]
system 00:0c: >[io 0x0400-0x04bf] has been reserved
system 00:0c: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: >[mem 0xffb80000-0xffbfffff]
pnp 00:0d: >Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0e: >[mem 0xe0000000-0xefffffff]
system 00:0e: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0f: >[mem 0x000f0000-0x000fffff]
pnp 00:0f: >[mem 0xcff00000-0xcfffffff]
pnp 00:0f: >[mem 0xfed00000-0xfed000ff]
pnp 00:0f: >[mem 0xcfe90000-0xcfefffff]
pnp 00:0f: >[mem 0x00000000-0x0009ffff]
pnp 00:0f: >[mem 0x00100000-0xcfe8ffff]
pnp 00:0f: >[mem 0xfec00000-0xfec00fff]
pnp 00:0f: >[mem 0xfed13000-0xfed1dfff]
pnp 00:0f: >[mem 0xfed20000-0xfed8ffff]
pnp 00:0f: >[mem 0xfee00000-0xfee00fff]
pnp 00:0f: >[mem 0xffb00000-0xffb7ffff]
pnp 00:0f: >[mem 0xfff00000-0xffffffff]
pnp 00:0f: >[mem 0x000e0000-0x000effff]
system 00:0f: >[mem 0x000f0000-0x000fffff] could not be reserved
system 00:0f: >[mem 0xcff00000-0xcfffffff] has been reserved
system 00:0f: >[mem 0xfed00000-0xfed000ff] has been reserved
system 00:0f: >[mem 0xcfe90000-0xcfefffff] could not be reserved
system 00:0f: >[mem 0x00000000-0x0009ffff] could not be reserved
system 00:0f: >[mem 0x00100000-0xcfe8ffff] could not be reserved
system 00:0f: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0f: >[mem 0xfed13000-0xfed1dfff] has been reserved
system 00:0f: >[mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0f: >[mem 0xfee00000-0xfee00fff] has been reserved
system 00:0f: >[mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0f: >[mem 0xfff00000-0xffffffff] has been reserved
system 00:0f: >[mem 0x000e0000-0x000effff] has been reserved
system 00:0f: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:01:00.0: >BAR 6: assigned [mem 0xfd600000-0xfd61ffff pref]
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: > bridge window [mem 0xfd600000-0xfd6fffff]
pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
pci 0000:00:1c.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: > bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.0: > bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:03:00.0: >BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref]
pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
pci 0000:00:1c.1: > bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.1: > bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:1c.1: > bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:1c.2: >PCI bridge to [bus 04-04]
pci 0000:00:1c.2: > bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.2: > bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:1c.2: > bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:00:1c.3: >PCI bridge to [bus 05-05]
pci 0000:00:1c.3: > bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.3: > bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:1c.3: > bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
pci 0000:06:09.0: >BAR 6: assigned [mem 0xfd400000-0xfd40ffff pref]
pci 0000:00:1e.0: >PCI bridge to [bus 06-06]
pci 0000:00:1e.0: > bridge window [io 0xa000-0xafff]
pci 0000:00:1e.0: > bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:1e.0: > bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
pci 0000:00:1e.0: >setting latency timer to 64
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: >resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: >resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: >resource 1 [mem 0xfd600000-0xfd6fffff]
pci_bus 0000:01: >resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: >resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: >resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:02: >resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
pci_bus 0000:03: >resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: >resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:03: >resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:04: >resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: >resource 1 [mem 0xfda00000-0xfdafffff]
pci_bus 0000:04: >resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
pci_bus 0000:05: >resource 0 [io 0x9000-0x9fff]
pci_bus 0000:05: >resource 1 [mem 0xfd800000-0xfd8fffff]
pci_bus 0000:05: >resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
pci_bus 0000:06: >resource 0 [io 0xa000-0xafff]
pci_bus 0000:06: >resource 1 [mem 0xfd500000-0xfd5fffff]
pci_bus 0000:06: >resource 2 [mem 0xfd400000-0xfd4fffff 64bit pref]
pci_bus 0000:06: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:06: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:06: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: >resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:06: >resource 8 [mem 0xcff00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: >Boot video device
PCI: CLS 64 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1362850024.180:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 1636
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: >irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: >irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: >irq 43 for MSI/MSI-X
pcieport 0000:00:1c.3: >irq 44 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
ACPI: Requesting acpi_cpufreq
Freeing initrd memory: 14712k freed
thermal LNXTHERM:00: >registered as thermal_zone0
ACPI: Thermal Zone [THRM] (-73 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: >version 2.13
ata_piix 0000:00:1f.1: >setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
ata_piix 0000:00:1f.2: >MAP [
P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: >setting latency timer to 64
ata2: port disabled--ignoring
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xfa00 ctl 0xf900 bmdma 0xf600 irq 19
ata4: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf608 irq 19
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: >setting latency timer to 64
ehci_hcd 0000:00:1d.7: >EHCI Host Controller
ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: >using broken periodic workaround
ehci_hcd 0000:00:1d.7: >debug port 1
ehci_hcd 0000:00:1d.7: >cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: >irq 23, io mem 0xfdfff000
ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1d.7
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: >setting latency timer to 64
uhci_hcd 0000:00:1d.0: >UHCI Host Controller
uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: >irq 23, io base 0x0000ff00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: UHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb2: >SerialNumber: 0000:00:1d.0
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.1: >setting latency timer to 64
uhci_hcd 0000:00:1d.1: >UHCI Host Controller
uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: >irq 19, io base 0x0000fe00
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: UHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb3: >SerialNumber: 0000:00:1d.1
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.2: >setting latency timer to 64
uhci_hcd 0000:00:1d.2: >UHCI Host Controller
uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: >irq 18, io base 0x0000fd00
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: UHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb4: >SerialNumber: 0000:00:1d.2
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.3: >setting latency timer to 64
uhci_hcd 0000:00:1d.3: >UHCI Host Controller
uhci_hcd 0000:00:1d.3: >new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: >irq 16, io base 0x0000fc00
usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: >Product: UHCI Host Controller
usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb5: >SerialNumber: 0000:00:1d.3
hub 5-0:1.0: >USB hub found
hub 5-0:1.0: >2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: >RTC can wake from S4
rtc_cmos 00:04: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 5:386:491
rtc_cmos 00:04: >setting system clock to 2013-03-09 17:27:04 UTC (1362850024)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ata3.00: ATA-8: Hitachi HDS721050CLA362, JP2OA39C, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATAPI: PIONEER DVD-RW DVR-115D, 1.18, max UDMA/66
ata1.01: configured for UDMA/66
ata3.00: configured for UDMA/133
isapnp: No Plug & Play device found
scsi 0:0:1:0: >CD-ROM PIONEER DVD-RW DVR-115D 1.18 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: >Attached scsi CD-ROM sr0
sr 0:0:1:0: >Attached scsi generic sg0 type 5
scsi 2:0:0:0: >Direct-Access ATA Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
sd 2:0:0:0: >[sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: >Attached scsi generic sg1 type 0
sd 2:0:0:0: >[sda] Write Protect is off
sd 2:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-2: >new high-speed USB device number 2 using ehci_hcd
sda: sda1 < sda5 sda6 sda7 sda8 > sda2 sda3 sda4
sd 2:0:0:0: >[sda] Attached SCSI disk
Freeing unused kernel memory: 756k freed
Write protecting the kernel text: 5960k
Write protecting the kernel read-only data: 2424k
NX-protecting the kernel data: 4280k
udevd[108]: starting version 175
sky2: driver version 1.30
sky2 0000:03:00.0: >Yukon-2 UL 2 chip revision 0
sky2 0000:03:00.0: >irq 45 for MSI/MSI-X
sky2 0000:03:00.0: >eth0: addr 00:30:1b:48:ef:cf
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:09.0: >(unregistered net_device): not PCI Express
r8169 0000:06:09.0: >eth1: RTL8169sb/8110sb at 0xf8432000, 00:1d:73:78:e7:61, XID 10000000 IRQ 17
r8169 0000:06:09.0: >eth1: jumbo features [frames: 7152 bytes, tx checksumming: ok]
firewire_ohci 0000:06:0a.0: >setting latency timer to 64
firewire_ohci 0000:06:0a.0: >added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb 1-2: >New USB device found, idVendor=2019, idProduct=ed17
usb 1-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: >Product: GW-USValue-EZ
usb 1-2: >Manufacturer: Realtek
usb 1-2: >SerialNumber: 00e04c000001
Refined TSC clocksource calibration: 3010.397 MHz.
Switching to clocksource tsc
firewire_core 0000:06:0a.0: created device fw0: GUID 000000301b48e99b, S400
EXT4-fs (sda4): INFO: recovery required on readonly filesystem
EXT4-fs (sda4): write access will be enabled during recovery
EXT4-fs (sda4): orphan cleanup on readonly fs
EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 6422552
EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 6422665
EXT4-fs (sda4): 2 orphan inodes deleted
EXT4-fs (sda4): recovery complete
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
udevd[353]: starting version 175
lp: driver loaded but no devices found
parport_pc 00:09: >reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ppdev: user-space parallel port driver
lp0: using parport0 (interrupt-driven).
microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
intel_rng: FWH not detected
ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \TCOI 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PM2S 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000480-0x000004bf SystemIO conflicts with Region \GPO2 1 (20120320/utaddress-251)
ACPI Warning: 0x00000480-0x000004bf SystemIO conflicts with Region \GPO_ 2 (20120320/utaddress-251)
ACPI Warning: 0x00000480-0x000004bf SystemIO conflicts with Region \GLED 3 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
leds_ss4200: no LED devices found
cfg80211: Calling CRDA to update world regulatory domain
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
snd_hda_intel 0000:00:1b.0: >irq 46 for MSI/MSI-X
[fglrx] Maximum main memory to use for locked dma buffers: 3872 MBytes.
[fglrx] vendor: 1002 device: 6819 count: 1
[fglrx] ioport: bar 4, base 0xee00, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 9.0.2 [Sep 20 2012] with 1 minors
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: >irq 47 for MSI/MSI-X
rtl8192cu: Chip version 0x10
rtl8192cu: MAC address: 00:22:cf:3f:f8:22
rtl8192cu: Board Type 0
rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Pending regulatory request, waiting for it to be processed...
rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
usbcore: registered new interface driver rtl8192cu
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: US
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Disabling freq 2467 MHz
cfg80211: Disabling freq 2472 MHz
cfg80211: Disabling freq 2484 MHz
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
ieee80211 phy0: >Selected rate control algorithm 'rtl_rc'
rtlwifi: wireless switch is on
type=1400 audit(1362817638.289:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=615 comm="apparmor_parser"
type=1400 audit(1362817638.289:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=636 comm="apparmor_parser"
type=1400 audit(1362817638.289:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=634 comm="apparmor_parser"
type=1400 audit(1362817638.289:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=615 comm="apparmor_parser"
type=1400 audit(1362817638.289:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=636 comm="apparmor_parser"
type=1400 audit(1362817638.289:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=634 comm="apparmor_parser"
type=1400 audit(1362817638.289:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=615 comm="apparmor_parser"
type=1400 audit(1362817638.289:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=636 comm="apparmor_parser"
type=1400 audit(1362817638.289:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=634 comm="apparmor_parser"
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
init: udev-fallback-graphics main process (785) terminated with status 1
EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
init: failsafe main process (829) killed by TERM signal
type=1400 audit(1362817642.969:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=914 comm="apparmor_parser"
audit_printk_skb: 66 callbacks suppressed
type=1400 audit(1362817643.961:34): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=989 comm="apparmor_parser"
type=1400 audit(1362817643.961:35): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=989 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
sky2 0000:03:00.0: >eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
fglrx_pci 0000:01:00.0: >irq 48 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[fglrx] Firegl kernel thread PID: 1220
[fglrx] Firegl kernel thread PID: 1223
[fglrx] Firegl kernel thread PID: 1224
[fglrx] IRQ 48 Enabled
r8169 0000:06:09.0: >eth1: link down
r8169 0000:06:09.0: >eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[fglrx] Gart USWC size:1260 M.
[fglrx] Gart cacheable size:500 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f90c000, size:3f4000
[fglrx] Reserved FB block: Unshared offset:7ffef000, size:11000
wlan0: authenticate with 00:90:fe:5d:3c:ae
wlan0: send auth to 00:90:fe:5d:3c:ae (try 1/3)
wlan0: authenticated
wlan0: associate with 00:90:fe:5d:3c:ae (try 1/3)
wlan0: RX AssocResp from 00:90:fe:5d:3c:ae (capab=0x411 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: JP
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Regulatory domain changed to country: JP
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (4910000 KHz - 4930000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (4910000 KHz - 4990000 KHz @ 40000 KHz), (N/A, 2300 mBm)
cfg80211: (4930000 KHz - 4950000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (5030000 KHz - 5045000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (5030000 KHz - 5090000 KHz @ 40000 KHz), (N/A, 2300 mBm)
cfg80211: (5050000 KHz - 5060000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm)
r8169 0000:06:09.0: >eth1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
wlan0: deauthenticated from 00:90:fe:5d:3c:ae (Reason: 1)
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:90:fe:5d:3c:ae
wlan0: send auth to 00:90:fe:5d:3c:ae (try 1/3)
wlan0: authenticated
wlan0: associate with 00:90:fe:5d:3c:ae (try 1/3)
wlan0: RX AssocResp from 00:90:fe:5d:3c:ae (capab=0x411 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: JP
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Regulatory domain changed to country: JP
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (4910000 KHz - 4930000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (4910000 KHz - 4990000 KHz @ 40000 KHz), (N/A, 2300 mBm)
cfg80211: (4930000 KHz - 4950000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (5030000 KHz - 5045000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (5030000 KHz - 5090000 KHz @ 40000 KHz), (N/A, 2300 mBm)
cfg80211: (5050000 KHz - 5060000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm)
wlan0: deauthenticated from 00:90:fe:5d:3c:ae (Reason: 1)
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:90:fe:5d:3c:ae
wlan0: send auth to 00:90:fe:5d:3c:ae (try 1/3)
wlan0: authenticated
wlan0: associate with 00:90:fe:5d:3c:ae (try 1/3)
wlan0: RX AssocResp from 00:90:fe:5d:3c:ae (capab=0x411 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: JP
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Regulatory domain changed to country: JP
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (4910000 KHz - 4930000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (4910000 KHz - 4990000 KHz @ 40000 KHz), (N/A, 2300 mBm)
cfg80211: (4930000 KHz - 4950000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (5030000 KHz - 5045000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (5030000 KHz - 5090000 KHz @ 40000 KHz), (N/A, 2300 mBm)
cfg80211: (5050000 KHz - 5060000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm)
wlan0: deauthenticated from 00:90:fe:5d:3c:ae (Reason: 1)
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:90:fe:5d:3c:ae
wlan0: send auth to 00:90:fe:5d:3c:ae (try 1/3)
wlan0: authenticated
wlan0: associate with 00:90:fe:5d:3c:ae (try 1/3)
wlan0: RX AssocResp from 00:90:fe:5d:3c:ae (capab=0x411 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: JP
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Regulatory domain changed to country: JP
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (4910000 KHz - 4930000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (4910000 KHz - 4990000 KHz @ 40000 KHz), (N/A, 2300 mBm)
cfg80211: (4930000 KHz - 4950000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (5030000 KHz - 5045000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (5030000 KHz - 5090000 KHz @ 40000 KHz), (N/A, 2300 mBm)
cfg80211: (5050000 KHz - 5060000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm)
wlan0: deauthenticated from 00:90:fe:5d:3c:ae (Reason: 1)
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:90:fe:5d:3c:ae
wlan0: send auth to 00:90:fe:5d:3c:ae (try 1/3)
wlan0: authenticated
wlan0: associate with 00:90:fe:5d:3c:ae (try 1/3)
wlan0: RX AssocResp from 00:90:fe:5d:3c:ae (capab=0x411 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: JP
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Regulatory domain changed to country: JP
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (4910000 KHz - 4930000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (4910000 KHz - 4990000 KHz @ 40000 KHz), (N/A, 2300 mBm)
cfg80211: (4930000 KHz - 4950000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (5030000 KHz - 5045000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (5030000 KHz - 5090000 KHz @ 40000 KHz), (N/A, 2300 mBm)
cfg80211: (5050000 KHz - 5060000 KHz @ 10000 KHz), (N/A, 2300 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm)