dmesg - after
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-030800rc7-generic (root@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201302081635 SMP Fri Feb 8 21:36:17 UTC 2013
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable
BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfc90fff] usable
BIOS-e820: [mem 0x00000000cfcf0000-0x00000000cfcf2fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfcf3000-0x00000000cfcfffff] ACPI data
BIOS-e820: [mem 0x00000000cfd00000-0x00000000cfdfffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-MA785GM-US2H/GA-MA785GM-US2H, BIOS F12a 07/08/2010
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CFD00000 mask FFFFFFF00000 uncachable
4 base 0000CFE00000 mask FFFFFFE00000 uncachable
5 base 000100000000 mask FFFF00000000 write-back
6 base 000200000000 mask FFFFE0000000 write-back
7 base 000220000000 mask FFFFF0000000 write-back
TOM2: 0000000230000000 aka 8960M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3325MB, range: 1MB, type UC
reg 4, base: 3326MB, range: 2MB, type UC
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 512MB, type WB
reg 7, base: 8704MB, range: 256MB, type WB
total RAM covered: 3325M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 4M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3325MB, range: 1MB, type UC
reg 4, base: 3326MB, range: 2MB, type UC
e820: update [mem 0xcfd00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfc91 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f56b0-0x000f56bf] mapped at [ffff8800000f56b0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000092000] 92000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xcfc90fff]
[mem 0x00000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfbfffff] page 2M
[mem 0xcfc00000-0xcfc90fff] page 4k
kernel direct mapping tables up to 0xcfc90fff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x22fffffff]
[mem 0x100000000-0x1ffffffff] page 1G
[mem 0x200000000-0x22fffffff] page 2M
kernel direct mapping tables up to 0x22fffffff @ [mem 0xcfc8f000-0xcfc90fff]
RAMDISK: [mem 0x3634a000-0x3719cfff]
Reserving 128MB of memory at 736MB for crashkernel (System RAM: 8188MB)
ACPI: RSDP 00000000000f7070 00014 (v00 GBT )
ACPI: RSDT 00000000cfcf3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfcf3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfcf30c0 074DB (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfcf0000 00040
ACPI: SSDT 00000000cfcfa680 012F6 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET 00000000cfcfb980 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfcfb9c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 00000000cfcfa5c0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
Initmem setup node 0 [mem 0x00000000-0x22fffffff]
NODE_DATA [mem 0x22fffb000-0x22fffffff]
[ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x22fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x00097fff]
node 0: [mem 0x00100000-0xcfc90fff]
node 0: [mem 0x100000000-0x22fffffff]
On node 0 totalpages: 2096153
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3906 pages, LIFO batch:0
DMA32 zone: 13235 pages used for memmap
DMA32 zone: 833758 pages, LIFO batch:31
Normal zone: 19456 pages used for memmap
Normal zone: 1225728 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 0000000000098000 - 0000000000099000
PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfc91000 - 00000000cfcf0000
PM: Registered nosave memory: 00000000cfcf0000 - 00000000cfcf3000
PM: Registered nosave memory: 00000000cfcf3000 - 00000000cfd00000
PM: Registered nosave memory: 00000000cfd00000 - 00000000cfe00000
PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
e820: [mem 0xcfe00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s85056 r8192 d21440 u262144
pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063392
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Node 0: aperture @ 186000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
Memory: 7959356k/9175040k available (7124k kernel code, 790428k absent, 425256k reserved, 6114k data, 1008k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
NR_IRQS:16640 nr_irqs:744 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2812.855 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.71 BogoMIPS (lpj=11251420)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00cfe00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 29143 entries in 114 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X6 1055T Processor (fam: 10, model: 0a, stepping: 00)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
process: System has AMD C1E enabled
process: Switch to broadcast mode on CPU1
process: Switch to broadcast mode on CPU2
process: Switch to broadcast mode on CPU3
process: Switch to broadcast mode on CPU4
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5
Brought up 6 CPUs
smpboot: Total of 6 processors activated (33754.26 BogoMIPS)
process: Switch to broadcast mode on CPU5
process: Switch to broadcast mode on CPU0
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcfcf0000-0xcfcf2fff] (12288 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
node 0 link 0: io port [c000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
TOM2: 0000000230000000 aka 8960M
bus: [bus 00-03] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0xe0400000-0xffffffff]
bus: 00 [mem 0xe0100000-0xe03fffff]
bus: 00 [mem 0x230000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci_root PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci_root PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff]
pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [1002:6739] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfdfc0000-0xfdfdffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa88] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff]
pci 0000:02:00.0: reg 18: [mem 0xfdbff000-0xfdbfffff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xfdbe0000-0xfdbeffff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:03:0e.0: [104c:8024] type 00 class 0x0c0010
pci 0000:03:0e.0: reg 10: [mem 0xfddff000-0xfddff7ff]
pci 0000:03:0e.0: reg 14: [mem 0xfddf8000-0xfddfbfff]
pci 0000:03:0e.0: supports D1 D2
pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
e820: reserve RAM buffer [mem 0x00098400-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfc91000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0220-0x0225] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
system 00:01: [io 0x4100-0x411f] has been reserved
system 00:01: [io 0x0228-0x022f] has been reserved
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c52] has been reserved
system 00:01: [io 0x0c6c-0x0c6d] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cdf] has been reserved
system 00:01: [io 0x4000-0x40fe] has been reserved
system 00:01: [io 0x4210-0x4217] has been reserved
system 00:01: [io 0x0b00-0x0b0f] has been reserved
system 00:01: [io 0x0b10-0x0b1f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: disabling [mem 0x000d4400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x00100000-0xcfceffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xe00fffff]; adding more reservations
system 00:08: [mem 0xcfcf0000-0xcfcfffff] could not be reserved
system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
system 00:08: [mem 0xcfd00000-0xcfdfffff] has been reserved
system 00:08: [mem 0xcfe00000-0xcfefffff] could not be reserved
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb0ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xcff00000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 4 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 14668k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1361196567.768:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 15703
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: processor limited to max C-state 1
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
scsi0 : pata_acpi
scsi1 : pata_acpi
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-030800rc7-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-030800rc7-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-030800rc7-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-030800rc7-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-030800rc7-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.0-030800rc7-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.8.0-030800rc7-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
usb 1-4: new high-speed USB device number 3 using ehci-pci
usb 1-4: New USB device found, idVendor=0424, idProduct=2514
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: ad6a7cd4a8ee89be312cbd1972d8de063ba3ac4b'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:04: setting system clock to 2013-02-18 14:09:29 UTC (1361196569)
powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1008k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1056k freed
Freeing unused kernel memory: 976k freed
udevd[123]: starting version 175
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
async_tx: api initialized (async)
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 42 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90000c70000, 00:24:1d:8e:81:7d, XID 1c4000c0 IRQ 42
r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
raid6: sse2x1 3916 MB/s
firewire_ohci 0000:03:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
usb 3-3: new low-speed USB device number 2 using ohci_hcd
raid6: sse2x2 7194 MB/s
raid6: sse2x4 7825 MB/s
raid6: using algorithm sse2x4 (7825 MB/s)
raid6: using intx1 recovery algorithm
xor: automatically using best checksumming function:
generic_sse: 12056.000 MB/sec
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
tsc: Refined TSC clocksource calibration: 2812.710 MHz
Switching to clocksource tsc
usb 3-3: New USB device found, idVendor=045e, idProduct=00db
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000
usb 3-3: Manufacturer: Microsoft
ata8: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input2
microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:12.0-3/input0
input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/input/input3
microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:12.0-3/input1
usb 1-4.2: new full-speed USB device number 4 using ehci-pci
usb 1-4.2: New USB device found, idVendor=046d, idProduct=c525
usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.2: Product: USB Receiver
usb 1-4.2: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.2/1-4.2:1.0/input/input4
hid-generic 0003:046D:C525.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-4.2/input0
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.2/1-4.2:1.1/input/input5
hid-generic 0003:046D:C525.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-4.2/input1
ata3.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-H62L, DL00, max UDMA/100
ata5.00: configured for UDMA/100
ata4.00: HPA detected: current 1250261615, native 1250263728
ata4.00: ATA-8: WDC WD6400AAKS-75A7B0, 01.03B01, max UDMA/133
ata4.00: 1250261615 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
scsi 3:0:0:0: Direct-Access ATA WDC WD6400AAKS-7 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 1250261615 512-byte logical blocks: (640 GB/596 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: Attached scsi generic sg1 type 0
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
ata6.00: ATA-8: WDC WD20EARX-008FB0, 51.0AB51, max UDMA/133
ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
firewire_core 0000:03:0e.0: created device fw0: GUID 004b9f4e0000241d, S400
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62L DL00 PQ: 0 ANSI: 5
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg2 type 5
scsi 5:0:0:0: Direct-Access ATA WDC WD20EARX-008 51.0 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 5:0:0:0: [sdc] 4096-byte physical blocks
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sd 5:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
init: ureadahead main process (342) terminated with status 5
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,user_xattr,discard
udevd[417]: starting version 175
lp: driver loaded but no devices found
wmi: Mapper loaded
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
MCE: In-kernel MCE decoding enabled.
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: ATAPI: Optiarc BD-ROM BR-5100S, 1.02, max UDMA/66
ata7.00: configured for UDMA/66
EDAC MC: Ver: 3.0.0
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.03
sp5100_tco: PCI Revision ID: 0x3c
sp5100_tco: MMIO allocation failed
microcode: CPU0: patch_level=0x010000bf
scsi 6:0:0:0: CD-ROM Optiarc BD-ROM BR-5100S 1.02 PQ: 0 ANSI: 5
[drm] Initialized drm 1.1.0 20060810
microcode: CPU0: new patch_level=0x010000dc
microcode: CPU1: patch_level=0x010000bf
microcode: CPU1: new patch_level=0x010000dc
microcode: CPU2: patch_level=0x010000bf
microcode: CPU2: new patch_level=0x010000dc
microcode: CPU3: patch_level=0x010000bf
microcode: CPU3: new patch_level=0x010000dc
microcode: CPU4: patch_level=0x010000bf
microcode: CPU4: new patch_level=0x010000dc
microcode: CPU5: patch_level=0x010000bf
microcode: CPU5: new patch_level=0x010000dc
microcode: Microcode Update Driver: v2.00 , Peter Oruba
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
sr1: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
sr 6:0:0:0: Attached scsi CD-ROM sr1
sr 6:0:0:0: Attached scsi generic sg4 type 5
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (BARTS 0x1002:0x6739 0x1787:0x200F).
[drm] register mmio base: 0xFDFC0000
[drm] register mmio size: 131072
ATOM BIOS: BARTS
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 4021520 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 43 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] probing gen 2 caps for device 1022:9603 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] Loading BARTS Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880222764c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880222764c0c
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD4
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-I-1
[drm] HPD6
[drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 3:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 9216000
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
init: statd-mounting (/media/Pictures) main process (437) killed by TERM signal
init: statd-mounting (/var/lib/mythtv/videos) main process (450) killed by TERM signal
init: statd-mounting (/var/lib/mythtv/music) main process (460) killed by TERM signal
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
init: idmapd-mounting (/media/Pictures) main process (436) killed by TERM signal
init: idmapd-mounting (/var/lib/mythtv/music) main process (458) killed by TERM signal
init: idmapd-mounting (/var/lib/mythtv/videos) main process (447) killed by TERM signal
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Console: switching to colour frame buffer device 240x75
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ppdev: user-space parallel port driver
init: failsafe main process (1226) killed by TERM signal
init: rsyslog main process (1267) terminated with status 127
init: rsyslog main process ended, respawning
init: plymouth-stop pre-start process (2352) terminated with status 1
[drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -12!
traps: nemo[2596] trap int3 ip:7ffdf6d2ec7f sp:7fff11505970 error:0
usb 1-4: USB disconnect, device number 3
usb 1-4.2: USB disconnect, device number 4
usb 1-4: new high-speed USB device number 5 using ehci-pci
usb 1-4: New USB device found, idVendor=0424, idProduct=2514
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 1-4.2: new full-speed USB device number 6 using ehci-pci
usb 1-4.2: New USB device found, idVendor=046d, idProduct=c525
usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.2: Product: USB Receiver
usb 1-4.2: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.2/1-4.2:1.0/input/input14
hid-generic 0003:046D:C525.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-4.2/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.2/1-4.2:1.1/input/input15
hid-generic 0003:046D:C525.0006: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-4.2/input1
traps: nemo[646] trap int3 ip:7eff21a29c7f sp:7fff0c916a20 error:0