dmesg - None
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000077e6ffff] usable
BIOS-e820: [mem 0x0000000077e70000-0x0000000077e82fff] ACPI data
BIOS-e820: [mem 0x0000000077e83000-0x0000000077e84fff] ACPI NVS
BIOS-e820: [mem 0x0000000077e85000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
DMI present.
DMI: TOSHIBA Satellite A215/IALAA, BIOS V2.30 01/15/2010
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x77e70 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000f7300-0x000f730f] mapped at [c00f7300]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x76e69000-0x77e6ffff]
Allocated new RAMDISK: [mem 0x36bf7000-0x37bfd2e7]
Move RAMDISK from [mem 0x76e69000-0x77e6f2e7] to [mem 0x36bf7000-0x37bfd2e7]
ACPI: RSDP 000f7260 00024 (v02 TOSCPL)
ACPI: XSDT 77e7aa5a 00064 (v01 TOSCPL TOSCPL00 06040000 LTP 00000000)
ACPI: FACP 77e82939 000F4 (v03 TOSCPL Herring 06040000 ATI 000F4240)
ACPI: DSDT 77e7aabe 07E7B (v01 TOSCPL SB600 06040000 MSFT 03000000)
ACPI: FACS 77e84fc0 00040
ACPI: TCPA 77e82aa1 00032 (v02 TOSCPL 06040000 PTEC 00000000)
ACPI: SLIC 77e82ad3 00176 (v01 TOSCPL TOSCPL00 06040000 LOHR 00000000)
ACPI: SSDT 77e82c49 001C4 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
ACPI: APIC 77e82e0d 00054 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: MCFG 77e82e61 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: HPET 77e82e9d 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
ACPI: ASF! 77e82ed5 0012B (v32 DMA AMDTBL 06040000 PTL 00000001)
ACPI: Local APIC address 0xfee00000
1026MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x77e6ffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x77e6ffff]
On node 0 totalpages: 491005
free_area_init_node: node 0, pgdat c18a0840, node_mem_map f5cf6200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3949 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 2053 pages used for memmap
HighMem zone: 260717 pages, LIFO batch:31
Using APIC driver default
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538301 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f5cce000 s34176 r0 d23168 u57344
pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 487168
Kernel command line: noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash --
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
allocated 3928832 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00077e70)
Memory: 1916836k/1964480k available (5956k kernel code, 47184k reserved, 2928k data, 756k init, 1051080k highmem)
virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc18ae000 - 0xc196b000 ( 756 kB)
.data : 0xc15d1358 - 0xc18ad6c0 (2928 kB)
.text : 0xc1000000 - 0xc15d1358 (5956 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f5408000 soft=f540a000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1795.572 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.14 BogoMIPS (lpj=7182288)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
LVT offset 0 assigned for vector 0xf9
using AMD E400 aware idle routine
ACPI: Core revision 20120320
TOSHIBA Satellite detected - force copy of DSDT to local memory
ACPI: Forced DSDT copy: length 0x07E7B copied locally, original unmapped
ftrace: allocating 24585 entries in 49 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 0) ...
....... works.
CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f54ca000 soft=f54cc000
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
System has AMD C1E enabled
Switch to broadcast mode on CPU1
Brought up 2 CPUs
Total of 2 processors activated (7182.14 BogoMIPS).
Switch to broadcast mode on CPU0
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x77e83000-0x77e84fff] (8192 bytes)
dummy:
RTC time: 10:12:47, date: 01/25/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
node 0 link 0: io port [1000, fffff]
TOM: 0000000080000000 aka 2048M
node 0 link 0: mmio [f8100000, ffffffff]
node 0 link 0: mmio [f8000000, f80fffff]
node 0 link 0: mmio [f8000000, f7ffffff]
node 0 link 0: mmio [f0000000, f7ffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [f0000000, efffffff]
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [80000000, dfffffff]
bus: [00, ff] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x80000000-0xfcffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-1a] at [mem 0xe0000000-0xe1afffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe1afffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI Error: No handler for Region [ERAM] (f5422f90) [EmbeddedControl] (20120320/evregion-376)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20120320/exfldio-306)
ACPI Error: Method parse/execution failed [\_SB_.HTEV] (Node f5421e10), AE_NOT_EXIST (20120320/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC0.EC0_._REG] (Node f542ad08), AE_NOT_EXIST (20120320/psparse-536)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
Freeing initrd memory: 16412k freed
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: EC: GPE = 0x13, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d0000-0x000d1fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d2000-0x000d3fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d4000-0x000d5fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d6000-0x000d7fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d8000-0x000d9fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000da000-0x000dbfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000dc000-0x000ddfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000de000-0x000dffff]
pci_root PNP0A08:00: >host bridge window [mem 0x80000000-0xdfffffff]
pci_root PNP0A08:00: >host bridge window [mem 0xf0000000-0xffffffff]
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000d0000-0x000d1fff]
pci_bus 0000:00: >root bus resource [mem 0x000d2000-0x000d3fff]
pci_bus 0000:00: >root bus resource [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: >root bus resource [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: >root bus resource [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: >root bus resource [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: >root bus resource [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: >root bus resource [mem 0x000de000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0x80000000-0xdfffffff]
pci_bus 0000:00: >root bus resource [mem 0xf0000000-0xffffffff]
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci 0000:00:00.0: >[1002:7910] type 00 class 0x060000
pci 0000:00:01.0: >[1002:7912] type 01 class 0x060400
pci 0000:00:05.0: >[1002:7915] type 01 class 0x060400
pci 0000:00:05.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: >[1002:7916] type 01 class 0x060400
pci 0000:00:06.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: >[1002:7917] type 01 class 0x060400
pci 0000:00:07.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:12.0: >[1002:4380] type 00 class 0x01018f
pci 0000:00:12.0: >reg 10: [io 0x8440-0x8447]
pci 0000:00:12.0: >reg 14: [io 0x8434-0x8437]
pci 0000:00:12.0: >reg 18: [io 0x8438-0x843f]
pci 0000:00:12.0: >reg 1c: [io 0x8430-0x8433]
pci 0000:00:12.0: >reg 20: [io 0x8400-0x840f]
pci 0000:00:12.0: >reg 24: [mem 0xf8709000-0xf87093ff]
pci 0000:00:12.0: >set SATA to AHCI mode
pci 0000:00:13.0: >[1002:4387] type 00 class 0x0c0310
pci 0000:00:13.0: >reg 10: [mem 0xf8704000-0xf8704fff]
pci 0000:00:13.1: >[1002:4388] type 00 class 0x0c0310
pci 0000:00:13.1: >reg 10: [mem 0xf8705000-0xf8705fff]
pci 0000:00:13.2: >[1002:4389] type 00 class 0x0c0310
pci 0000:00:13.2: >reg 10: [mem 0xf8706000-0xf8706fff]
pci 0000:00:13.3: >[1002:438a] type 00 class 0x0c0310
pci 0000:00:13.3: >reg 10: [mem 0xf8707000-0xf8707fff]
pci 0000:00:13.4: >[1002:438b] type 00 class 0x0c0310
pci 0000:00:13.4: >reg 10: [mem 0xf8708000-0xf8708fff]
pci 0000:00:13.5: >[1002:4386] type 00 class 0x0c0320
pci 0000:00:13.5: >reg 10: [mem 0xf8709400-0xf87094ff]
pci 0000:00:13.5: >supports D1 D2
pci 0000:00:13.5: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: >[1002:4385] type 00 class 0x0c0500
pci 0000:00:14.0: >reg 10: [io 0x8410-0x841f]
pci 0000:00:14.1: >[1002:438c] type 00 class 0x01018a
pci 0000:00:14.1: >reg 10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: >reg 14: [io 0x03f4-0x03f7]
pci 0000:00:14.1: >reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: >reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: >reg 20: [io 0x8420-0x842f]
pci 0000:00:14.2: >[1002:4383] type 00 class 0x040300
pci 0000:00:14.2: >reg 10: [mem 0xf8700000-0xf8703fff 64bit]
pci 0000:00:14.2: >PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: >[1002:438d] type 00 class 0x060100
pci 0000:00:14.4: >[1002:4384] type 01 class 0x060401
pci 0000:00:18.0: >[1022:1100] type 00 class 0x060000
pci 0000:00:18.1: >[1022:1101] type 00 class 0x060000
pci 0000:00:18.2: >[1022:1102] type 00 class 0x060000
pci 0000:00:18.3: >[1022:1103] type 00 class 0x060000
pci 0000:01:05.0: >[1002:791f] type 00 class 0x030000
pci 0000:01:05.0: >reg 10: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:01:05.0: >reg 18: [mem 0xf8100000-0xf810ffff 64bit]
pci 0000:01:05.0: >reg 20: [io 0x9000-0x90ff]
pci 0000:01:05.0: >reg 24: [mem 0xf8000000-0xf80fffff]
pci 0000:01:05.0: >supports D1 D2
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0x9000-0x9fff]
pci 0000:00:01.0: > bridge window [mem 0xf8000000-0xf81fffff]
pci 0000:00:01.0: > bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:00:05.0: >PCI bridge to [bus 08-0d]
pci 0000:0e:00.0: >[10ec:8136] type 00 class 0x020000
pci 0000:0e:00.0: >reg 10: [io 0xa000-0xa0ff]
pci 0000:0e:00.0: >reg 18: [mem 0xf8300000-0xf8300fff 64bit]
pci 0000:0e:00.0: >reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:0e:00.0: >supports D1 D2
pci 0000:0e:00.0: >PME# supported from D1 D2 D3hot D3cold
pci 0000:0e:00.0: >disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:06.0: >PCI bridge to [bus 0e-0e]
pci 0000:00:06.0: > bridge window [io 0xa000-0xafff]
pci 0000:00:06.0: > bridge window [mem 0xf8300000-0xf83fffff]
pci 0000:14:00.0: >[168c:001c] type 00 class 0x020000
pci 0000:14:00.0: >reg 10: [mem 0xf8200000-0xf820ffff 64bit]
pci 0000:14:00.0: >disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:07.0: >PCI bridge to [bus 14-14]
pci 0000:00:07.0: > bridge window [mem 0xf8200000-0xf82fffff]
pci 0000:1a:04.0: >[104c:8039] type 02 class 0x060700
pci 0000:1a:04.0: >reg 10: [mem 0xf8404000-0xf8404fff]
pci 0000:1a:04.0: >supports D1 D2
pci 0000:1a:04.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:1a:04.1: >[104c:803a] type 00 class 0x0c0010
pci 0000:1a:04.1: >reg 10: [mem 0xf8406000-0xf84067ff]
pci 0000:1a:04.1: >reg 14: [mem 0xf8400000-0xf8403fff]
pci 0000:1a:04.1: >supports D1 D2
pci 0000:1a:04.1: >PME# supported from D0 D1 D2 D3hot
pci 0000:1a:04.2: >[104c:803b] type 00 class 0x018000
pci 0000:1a:04.2: >reg 10: [mem 0xf8405000-0xf8405fff]
pci 0000:1a:04.2: >supports D1 D2
pci 0000:1a:04.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:1a:04.3: >[104c:803c] type 00 class 0x080501
pci 0000:1a:04.3: >reg 10: [mem 0xf8406800-0xf84068ff]
pci 0000:1a:04.3: >supports D1 D2
pci 0000:1a:04.3: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.4: >PCI bridge to [bus 1a-1b] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0xf8400000-0xf84fffff]
pci 0000:00:14.4: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci_bus 0000:1b: >[bus 1b-1e] partially hidden behind transparent bridge 0000:1a [bus 1a-1b]
pci_bus 0000:00: >on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x77e70000-0x77ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000c1fff window]
pnp 00:00: >[mem 0x000c2000-0x000c3fff window]
pnp 00:00: >[mem 0x000c4000-0x000c5fff window]
pnp 00:00: >[mem 0x000c6000-0x000c7fff window]
pnp 00:00: >[mem 0x000c8000-0x000c9fff window]
pnp 00:00: >[mem 0x000ca000-0x000cbfff window]
pnp 00:00: >[mem 0x000cc000-0x000cdfff window]
pnp 00:00: >[mem 0x000ce000-0x000cffff window]
pnp 00:00: >[mem 0x000d0000-0x000d1fff window]
pnp 00:00: >[mem 0x000d2000-0x000d3fff window]
pnp 00:00: >[mem 0x000d4000-0x000d5fff window]
pnp 00:00: >[mem 0x000d6000-0x000d7fff window]
pnp 00:00: >[mem 0x000d8000-0x000d9fff window]
pnp 00:00: >[mem 0x000da000-0x000dbfff window]
pnp 00:00: >[mem 0x000dc000-0x000ddfff window]
pnp 00:00: >[mem 0x000de000-0x000dffff window]
pnp 00:00: >[mem 0x000e0000-0x000e1fff window]
pnp 00:00: >[mem 0x000e2000-0x000e3fff window]
pnp 00:00: >[mem 0x000e4000-0x000e5fff window]
pnp 00:00: >[mem 0x000e6000-0x000e7fff window]
pnp 00:00: >[mem 0x000e8000-0x000e9fff window]
pnp 00:00: >[mem 0x000ea000-0x000ebfff window]
pnp 00:00: >[mem 0x000ec000-0x000edfff window]
pnp 00:00: >[mem 0x000ee000-0x000effff window]
pnp 00:00: >[mem 0x80000000-0xdfffffff window]
pnp 00:00: >[mem 0xf0000000-0xffffffff window]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[mem 0xfec00000-0xfec00fff]
pnp 00:01: >[mem 0xfee00000-0xfee00fff]
system 00:01: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: >[mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: >[io 0x0000-0x001f]
pnp 00:02: >[io 0x0080-0x008f]
pnp 00:02: >[io 0x00c0-0x00df]
pnp 00:02: >[dma 4]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: >[io 0x00f0-0x00fe]
pnp 00:03: >[irq 13]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: >[io 0x0070-0x0071]
pnp 00:04: >[irq 8]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: >[io 0x0061]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: >[io 0x0060]
pnp 00:06: >[io 0x0064]
pnp 00:06: >[irq 1]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: >[irq 12]
pnp 00:07: >Plug and Play ACPI device, IDs SYN0705 SYN0700 SYN0002 PNP0f13 (active)
pnp 00:08: >[io 0x0022-0x0023]
pnp 00:08: >[io 0x002e-0x002f]
pnp 00:08: >[io 0x0072-0x0073]
pnp 00:08: >[io 0x1080]
pnp 00:08: >[io 0x00b0-0x00b1]
pnp 00:08: >[io 0x0092]
pnp 00:08: >[io 0x0220-0x022f]
pnp 00:08: >[io 0x040b]
pnp 00:08: >[io 0x04d0-0x04d1]
pnp 00:08: >[io 0x04d6]
pnp 00:08: >[io 0x0530-0x0537]
pnp 00:08: >[io 0x0c00-0x0c01]
pnp 00:08: >[io 0x0c14]
pnp 00:08: >[io 0x0c50-0x0c52]
pnp 00:08: >[io 0x0c6c]
pnp 00:08: >[io 0x0c6f]
pnp 00:08: >[io 0x0cd0-0x0cd1]
pnp 00:08: >[io 0x0cd2-0x0cd3]
pnp 00:08: >[io 0x0cd4-0x0cd5]
pnp 00:08: >[io 0x0cd6-0x0cd7]
pnp 00:08: >[io 0x0cd8-0x0cdf]
pnp 00:08: >[io 0x8000-0x805f]
pnp 00:08: >[io 0x8100-0x81ff window]
pnp 00:08: >[io 0x8200-0x82ff window]
pnp 00:08: >[io 0x0f40-0x0f47]
pnp 00:08: >[io 0x087f]
pnp 00:08: >[io 0xfd60-0xfddf]
system 00:08: >[io 0x1080] has been reserved
system 00:08: >[io 0x0220-0x022f] has been reserved
system 00:08: >[io 0x040b] has been reserved
system 00:08: >[io 0x04d0-0x04d1] has been reserved
system 00:08: >[io 0x04d6] has been reserved
system 00:08: >[io 0x0530-0x0537] has been reserved
system 00:08: >[io 0x0c00-0x0c01] has been reserved
system 00:08: >[io 0x0c14] has been reserved
system 00:08: >[io 0x0c50-0x0c52] has been reserved
system 00:08: >[io 0x0c6c] has been reserved
system 00:08: >[io 0x0c6f] has been reserved
system 00:08: >[io 0x0cd0-0x0cd1] has been reserved
system 00:08: >[io 0x0cd2-0x0cd3] has been reserved
system 00:08: >[io 0x0cd4-0x0cd5] has been reserved
system 00:08: >[io 0x0cd6-0x0cd7] has been reserved
system 00:08: >[io 0x0cd8-0x0cdf] has been reserved
system 00:08: >[io 0x8000-0x805f] has been reserved
system 00:08: >[io 0x8100-0x81ff window] has been reserved
system 00:08: >[io 0x8200-0x82ff window] has been reserved
system 00:08: >[io 0x0f40-0x0f47] has been reserved
system 00:08: >[io 0x087f] has been reserved
system 00:08: >[io 0xfd60-0xfddf] has been reserved
system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: >[mem 0x000e0000-0x000fffff]
pnp 00:09: >[mem 0xfff00000-0xffffffff]
pnp 00:09: >[mem 0x00000000-0xffffffffffffffff disabled]
system 00:09: >[mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: >[mem 0xfff00000-0xffffffff] has been reserved
system 00:09: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0a: >[mem 0xfed00000-0xfed003ff]
pnp 00:0a: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:05.0: >bridge window [io 0x1000-0x0fff] to [bus 08-0d] add_size 1000
pci 0000:00:05.0: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08-0d] add_size 200000
pci 0000:00:05.0: >bridge window [mem 0x00100000-0x000fffff] to [bus 08-0d] add_size 200000
pci 0000:1a:04.0: >res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:1a:04.0: >res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:00:14.4: >bridge window [io 0x1000-0x0fff] to [bus 1a-1b] add_size 1000
pci 0000:1a:04.0: >res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:00:14.4: >bridge window [mem 0x04000000-0x03ffffff pref] to [bus 1a-1b] add_size 4000000
pci 0000:00:14.4: >res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:00:05.0: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:05.0: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:05.0: >res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:14.4: >res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:14.4: >BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
pci 0000:00:05.0: >BAR 14: assigned [mem 0x84000000-0x841fffff]
pci 0000:00:05.0: >BAR 15: assigned [mem 0x84200000-0x843fffff 64bit pref]
pci 0000:00:06.0: >BAR 15: assigned [mem 0x84400000-0x844fffff pref]
pci 0000:00:05.0: >BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:14.4: >BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0x9000-0x9fff]
pci 0000:00:01.0: > bridge window [mem 0xf8000000-0xf81fffff]
pci 0000:00:01.0: > bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:00:05.0: >PCI bridge to [bus 08-0d]
pci 0000:00:05.0: > bridge window [io 0x2000-0x2fff]
pci 0000:00:05.0: > bridge window [mem 0x84000000-0x841fffff]
pci 0000:00:05.0: > bridge window [mem 0x84200000-0x843fffff 64bit pref]
pci 0000:0e:00.0: >BAR 6: assigned [mem 0x84400000-0x8441ffff pref]
pci 0000:00:06.0: >PCI bridge to [bus 0e-0e]
pci 0000:00:06.0: > bridge window [io 0xa000-0xafff]
pci 0000:00:06.0: > bridge window [mem 0xf8300000-0xf83fffff]
pci 0000:00:06.0: > bridge window [mem 0x84400000-0x844fffff pref]
pci 0000:00:07.0: >PCI bridge to [bus 14-14]
pci 0000:00:07.0: > bridge window [mem 0xf8200000-0xf82fffff]
pci 0000:1a:04.0: >res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:1a:04.0: >res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
pci 0000:1a:04.0: >res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:1a:04.0: >res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:1a:04.0: >BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
pci 0000:1a:04.0: >BAR 16: assigned [mem 0x88000000-0x8bffffff]
pci 0000:1a:04.0: >BAR 13: assigned [io 0x3000-0x30ff]
pci 0000:1a:04.0: >BAR 14: assigned [io 0x3400-0x34ff]
pci 0000:1a:04.0: >CardBus bridge to [bus 1b-1e]
pci 0000:1a:04.0: > bridge window [io 0x3000-0x30ff]
pci 0000:1a:04.0: > bridge window [io 0x3400-0x34ff]
pci 0000:1a:04.0: > bridge window [mem 0x80000000-0x83ffffff pref]
pci 0000:1a:04.0: > bridge window [mem 0x88000000-0x8bffffff]
pci 0000:00:14.4: >PCI bridge to [bus 1a-1b]
pci 0000:00:14.4: > bridge window [io 0x3000-0x3fff]
pci 0000:00:14.4: > bridge window [mem 0xf8400000-0xf84fffff]
pci 0000:00:14.4: > bridge window [mem 0x80000000-0x83ffffff pref]
pci 0000:00:05.0: >enabling device (0000 -> 0003)
pci_bus 0000:00: >resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 5 [mem 0x000d0000-0x000d1fff]
pci_bus 0000:00: >resource 6 [mem 0x000d2000-0x000d3fff]
pci_bus 0000:00: >resource 7 [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: >resource 8 [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: >resource 9 [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: >resource 10 [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: >resource 11 [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: >resource 12 [mem 0x000de000-0x000dffff]
pci_bus 0000:00: >resource 13 [mem 0x80000000-0xdfffffff]
pci_bus 0000:00: >resource 14 [mem 0xf0000000-0xffffffff]
pci_bus 0000:00: >resource 15 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 16 [io 0x0d00-0xffff]
pci_bus 0000:01: >resource 0 [io 0x9000-0x9fff]
pci_bus 0000:01: >resource 1 [mem 0xf8000000-0xf81fffff]
pci_bus 0000:01: >resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
pci_bus 0000:08: >resource 0 [io 0x2000-0x2fff]
pci_bus 0000:08: >resource 1 [mem 0x84000000-0x841fffff]
pci_bus 0000:08: >resource 2 [mem 0x84200000-0x843fffff 64bit pref]
pci_bus 0000:0e: >resource 0 [io 0xa000-0xafff]
pci_bus 0000:0e: >resource 1 [mem 0xf8300000-0xf83fffff]
pci_bus 0000:0e: >resource 2 [mem 0x84400000-0x844fffff pref]
pci_bus 0000:14: >resource 1 [mem 0xf8200000-0xf82fffff]
pci_bus 0000:1a: >resource 0 [io 0x3000-0x3fff]
pci_bus 0000:1a: >resource 1 [mem 0xf8400000-0xf84fffff]
pci_bus 0000:1a: >resource 2 [mem 0x80000000-0x83ffffff pref]
pci_bus 0000:1a: >resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:1a: >resource 5 [mem 0x000d0000-0x000d1fff]
pci_bus 0000:1a: >resource 6 [mem 0x000d2000-0x000d3fff]
pci_bus 0000:1a: >resource 7 [mem 0x000d4000-0x000d5fff]
pci_bus 0000:1a: >resource 8 [mem 0x000d6000-0x000d7fff]
pci_bus 0000:1a: >resource 9 [mem 0x000d8000-0x000d9fff]
pci_bus 0000:1a: >resource 10 [mem 0x000da000-0x000dbfff]
pci_bus 0000:1a: >resource 11 [mem 0x000dc000-0x000ddfff]
pci_bus 0000:1a: >resource 12 [mem 0x000de000-0x000dffff]
pci_bus 0000:1a: >resource 13 [mem 0x80000000-0xdfffffff]
pci_bus 0000:1a: >resource 14 [mem 0xf0000000-0xffffffff]
pci_bus 0000:1a: >resource 15 [io 0x0000-0x0cf7]
pci_bus 0000:1a: >resource 16 [io 0x0d00-0xffff]
pci_bus 0000:1b: >resource 0 [io 0x3000-0x30ff]
pci_bus 0000:1b: >resource 1 [io 0x3400-0x34ff]
pci_bus 0000:1b: >resource 2 [mem 0x80000000-0x83ffffff pref]
pci_bus 0000:1b: >resource 3 [mem 0x88000000-0x8bffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:05.0: >Boot video device
PCI: CLS 32 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1359108771.220:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 1722
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:05.0: >irq 40 for MSI/MSI-X
pcieport 0000:00:06.0: >irq 41 for MSI/MSI-X
pcieport 0000:00:07.0: >irq 42 for MSI/MSI-X
pcieport 0000:00:05.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:05.0:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:06.0: >Signaling PME through PCIe PME interrupt
pci 0000:0e:00.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:06.0:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:07.0: >Signaling PME through PCIe PME interrupt
pci 0000:14:00.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.0:pcie01: >service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:05.0:pcie04: >HPC vendor_id 1002 device_id 7915 ss_vid 1179 ss_did ff00
pciehp 0000:00:05.0:pcie04: >service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ACPI: AC Adapter [ACAD] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: processor limited to max C-state 1
ACPI: Battery Slot [BAT1] (battery present)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:12.0: >version 3.0
ahci 0000:00:12.0: >controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: >AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: >flags: ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709100 irq 22
ata2: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709180 irq 22
ata3: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709200 irq 22
ata4: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709280 irq 22
pata_acpi 0000:00:14.1: >setting latency timer to 64
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:13.5: >EHCI Host Controller
ehci_hcd 0000:00:13.5: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.5: >applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.5: >debug port 1
ehci_hcd 0000:00:13.5: >irq 19, io mem 0xf8709400
ehci_hcd 0000:00:13.5: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:13.5
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: >OHCI Host Controller
ohci_hcd 0000:00:13.0: >new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: >irq 16, io mem 0xf8704000
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: OHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb2: >SerialNumber: 0000:00:13.0
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >2 ports detected
ohci_hcd 0000:00:13.1: >OHCI Host Controller
ohci_hcd 0000:00:13.1: >new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: >irq 17, io mem 0xf8705000
ACPI: Battery Slot [BAT1] (battery present)
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: OHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb3: >SerialNumber: 0000:00:13.1
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >2 ports detected
ohci_hcd 0000:00:13.2: >OHCI Host Controller
ohci_hcd 0000:00:13.2: >new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: >irq 18, io mem 0xf8706000
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: OHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb4: >SerialNumber: 0000:00:13.2
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >2 ports detected
ohci_hcd 0000:00:13.3: >OHCI Host Controller
ohci_hcd 0000:00:13.3: >new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: >irq 17, io mem 0xf8707000
usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: >Product: OHCI Host Controller
usb usb5: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb5: >SerialNumber: 0000:00:13.3
hub 5-0:1.0: >USB hub found
hub 5-0:1.0: >2 ports detected
ohci_hcd 0000:00:13.4: >OHCI Host Controller
ohci_hcd 0000:00:13.4: >new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: >irq 18, io mem 0xf8708000
usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: >Product: OHCI Host Controller
usb usb6: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb6: >SerialNumber: 0000:00:13.4
hub 6-0:1.0: >USB hub found
hub 6-0:1.0: >2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: >RTC can wake from S4
rtc_cmos 00:04: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
usb 1-1: >new high-speed USB device number 2 using ehci_hcd
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
Key type trusted registered
Key type encrypted registered
Magic number: 13:75:225
rtc_cmos 00:04: >setting system clock to 2013-01-25 10:12:53 UTC (1359108773)
powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-56 (2 cpu cores) (version 2.20.00)
powernow-k8: fid 0xa (1800 MHz), vid 0x12
powernow-k8: fid 0x8 (1600 MHz), vid 0x14
powernow-k8: fid 0x0 (800 MHz), vid 0x1e
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
isapnp: No Plug & Play device found
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 1-1: >New USB device found, idVendor=0951, idProduct=1603
usb 1-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: >Product: DataTraveler 2.0
usb 1-1: >Manufacturer: Kingston
usb 1-1: >SerialNumber: 000FEAFD647B5B8C180800CA
Initializing USB Mass Storage driver...
scsi4 : usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
usb 1-8: >new high-speed USB device number 4 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD5000BEVT-00ZAT0, 01.01A01, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
scsi 0:0:0:0: >Direct-Access ATA WDC WD5000BEVT-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: >[sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-8: >New USB device found, idVendor=04f2, idProduct=b008
usb 1-8: >New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-8: >Product: Chicony USB 2.0 Camera
usb 1-8: >Manufacturer: Chicony Electronics Co., Ltd.
usb 1-8: >SerialNumber: SN0001
sda: sda1 sda2
sd 0:0:0:0: >[sda] Attached SCSI disk
Freeing unused kernel memory: 756k freed
Write protecting the kernel text: 5960k
Write protecting the kernel read-only data: 2424k
NX-protecting the kernel data: 4280k
udevd[105]: starting version 175
usb 3-1: >new low-speed USB device number 2 using ohci_hcd
[drm] Initialized drm 1.1.0 20060810
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:27: >registered as cooling_device2
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:25/LNXVIDEO:01/input/input4
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:0e:00.0: >irq 43 for MSI/MSI-X
r8169 0000:0e:00.0: >eth0: RTL8101e at 0xf8408000, 00:16:d4:fe:a1:d1, XID 14000000 IRQ 43
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:05.0: >power state changed by ACPI to D0
radeon 0000:01:05.0: >power state changed by ACPI to D0
[drm] initializing kernel modesetting (RS690 0x1002:0x791F 0x1179:0xFF00).
[drm] register mmio base: 0xF8100000
[drm] register mmio size: 65536
ATOM BIOS: ATI
radeon 0000:01:05.0: >VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used)
radeon 0000:01:05.0: >GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 441462 kiB
[TTM] Zone highmem: Available graphics memory: 967002 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: 1 quad pipes, 1 z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x0000000037280000).
radeon 0000:01:05.0: >WB enabled
radeon 0000:01:05.0: >fence driver on ring 0 use gpu addr 0x0000000080000000 and cpu addr 0xf7108000
[drm] Loading RS690/RS740 Microcode
usb 3-1: >New USB device found, idVendor=046d, idProduct=c404
usb 3-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: >Product: Trackball
usb 3-1: >Manufacturer: Logitech
scsi5 : pata_atiixp
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
scsi6 : pata_atiixp
sdhci-pci 0000:1a:04.3: >SDHCI controller found [104c:803c] (rev 0)
mmc0: no vmmc regulator found
Registered led device: mmc0::
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[drm] radeon: ring at 0x0000000080001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] LVDS-1
[drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
[drm] Encoders:
[drm] LCD1: INTERNAL_LVTM1
[drm] Connector 2:
[drm] SVIDEO-1
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC1
mmc0: SDHCI controller on PCI [0000:1a:04.3] using DMA
ata5.00: ATAPI: PIONEER DVD-RW DVR-K17LF, 4.53, max UDMA/33
ata5.00: configured for UDMA/33
scsi 4:0:0:0: >Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: >Attached scsi generic sg1 type 0
sd 4:0:0:0: >[sdb] 7936000 512-byte logical blocks: (4.06 GB/3.78 GiB)
sd 4:0:0:0: >[sdb] Write Protect is off
sd 4:0:0:0: >[sdb] Mode Sense: 23 00 00 00
sd 4:0:0:0: >[sdb] No Caching mode page present
sd 4:0:0:0: >[sdb] Assuming drive cache: write through
sd 4:0:0:0: >[sdb] No Caching mode page present
sd 4:0:0:0: >[sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: >[sdb] No Caching mode page present
sd 4:0:0:0: >[sdb] Assuming drive cache: write through
sd 4:0:0:0: >[sdb] Attached SCSI removable disk
scsi 5:0:0:0: >CD-ROM PIONEER DVD-RW DVR-K17LF 4.53 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: >Attached scsi CD-ROM sr0
sr 5:0:0:0: >Attached scsi generic sg2 type 5
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Trackball as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input5
hid-generic 0003:046D:C404.0001: >input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:13.1-1/input0
firewire_ohci 0000:1a:04.1: >added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[drm] fb mappable at 0xF0040000
[drm] vram apper at 0xF0000000
[drm] size 4096000
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
firewire_core 0000:1a:04.1: created device fw0: GUID 00023f75c04039fb, S400
Console: switching to colour frame buffer device 160x50
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.18.0 20080528 for 0000:01:05.0 on minor 0
xor: automatically using best checksumming function:
pIII_sse : 5269.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
squashfs: version 4.0 (2009/01/31) Phillip Lougher
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[2390]: starting version 175
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
lp: driver loaded but no devices found
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
cfg80211: Calling CRDA to update world regulatory domain
wmi: Mapper loaded
ppdev: user-space parallel port driver
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
input: Toshiba input device as /devices/virtual/input/input6
piix4_smbus 0000:00:14.0: >SMBus Host Controller at 0x8410, revision 0
Registered led device: toshiba::illumination
k8temp 0000:00:18.3: >Temperature readouts might be wrong - check erratum #141
sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
sp5100_tco: mmio address 0xfec000f0 already in use
microcode: AMD CPU family 0xf not supported
yenta_cardbus 0000:1a:04.0: >CardBus bridge found [1179:ff00]
yenta_cardbus 0000:1a:04.0: >Enabling burst memory read transactions
yenta_cardbus 0000:1a:04.0: >Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:1a:04.0: >Routing CardBus interrupts to PCI
yenta_cardbus 0000:1a:04.0: >TI: mfunc 0x10a01b22, devctl 0x64
device-mapper: multipath: version 1.4.0 loaded
yenta_cardbus 0000:1a:04.0: >ISA IRQ mask 0x0cf8, PCI irq 20
yenta_cardbus 0000:1a:04.0: >Socket status: 30000006
pci_bus 0000:1a: >Raising subordinate bus# of parent bus (#1a) from #1b to #1e
yenta_cardbus 0000:1a:04.0: >pcmcia: parent PCI bridge window: [io 0x3000-0x3fff]
pcmcia_socket pcmcia_socket0: >cs: IO port probe 0x3000-0x3fff:
ath5k 0000:14:00.0: >registered as 'phy0'
excluding 0x3000-0x30ff 0x3400-0x34ff
yenta_cardbus 0000:1a:04.0: >pcmcia: parent PCI bridge window: [mem 0xf8400000-0xf84fffff]
pcmcia_socket pcmcia_socket0: >cs: memory probe 0xf8400000-0xf84fffff:
excluding 0xf8400000-0xf840ffff
yenta_cardbus 0000:1a:04.0: >pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
pcmcia_socket pcmcia_socket0: >cs: memory probe 0x80000000-0x83ffffff:
excluding 0x80000000-0x83ffffff
kvm: disabled by bios
Linux video capture interface: v2.00
init: failsafe main process (2634) killed by TERM signal
uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:13.5/usb1/1-8/1-8:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
r8169 0000:0e:00.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
ath: EEPROM regdomain: 0x64
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x64
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
ieee80211 phy0: >Selected rate control algorithm 'minstrel_ht'
ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
type=1701 audit(1359108936.004:2): auid=4294967295 uid=999 gid=999 ses=4294967295 pid=4291 comm="chromium-browse" reason="seccomp" sig=0 syscall=20 compat=0 ip=0xb2fa8424 code=0x50000
wlan0: authenticate with 00:26:62:a8:be:36
wlan0: send auth to 00:26:62:a8:be:36 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:26:62:a8:be:36 (try 1/3)
wlan0: RX AssocResp from 00:26:62:a8:be:36 (capab=0x431 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Disabling freq 2467 MHz
cfg80211: Disabling freq 2472 MHz
cfg80211: Disabling freq 2484 MHz
ath: regdomain 0x8348 updated by CountryIE
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
type=1701 audit(1359127121.424:3): auid=4294967295 uid=999 gid=999 ses=4294967295 pid=4971 comm="chromium-browse" reason="seccomp" sig=0 syscall=20 compat=0 ip=0xb2eb1424 code=0x50000