dmesg - iozone-4mb-2gb
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.2.1-linaro-omap (root@adam-Gumstix) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-7ubuntu2) ) #3 PREEMPT Thu Jul 26 17:05:26 PDT 2012
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Gumstix Overo
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 128000
[ 0.000000] free_area_init_node: node 0, pgdat c0924f7c, node_mem_map c0e96000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 126976
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 500MB = 500MB total
[ 0.000000] Memory: 490556k/490556k available, 33732k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc085f770 (8542 kB)
[ 0.000000] .init : 0xc0860000 - 0xc08b9000 ( 356 kB)
[ 0.000000] .data : 0xc08ba000 - 0xc09274f8 ( 438 kB)
[ 0.000000] .bss : 0xc092751c - 0xc0e957cc (5561 kB)
[ 0.000000] NR_IRQS:410
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3695 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.065246] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
[ 0.106292] pid_max: default: 32768 minimum: 301
[ 0.111755] Security Framework initialized
[ 0.116241] AppArmor: AppArmor initialized
[ 0.120819] Mount-cache hash table entries: 512
[ 0.132354] CPU: Testing write buffer coherency: ok
[ 0.137908] ftrace: allocating 22297 entries in 66 pages
[ 0.215057] Setting up static identity map for 0x805e5b70 - 0x805e5bc8
[ 0.226654] devtmpfs: initialized
[ 0.246276] print_constraints: dummy:
[ 0.252716] NET: Registered protocol family 16
[ 0.258636] GPMC revision 5.0
[ 0.274993] OMAP GPIO hardware version 2.5
[ 0.294921] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.320404] Reprogramming SDRC clock to 400000000 Hz
[ 0.326080] dpll3_m2_clk rate change failed: -22
[ 0.331085] Found NAND on CS0
[ 0.334228] Registering NAND on CS0
[ 0.356567] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.386596] omap-mcbsp.2: alias fck already exists
[ 0.393096] omap-mcbsp.3: alias fck already exists
[ 0.404144] Calibrating delay loop (skipped) already calibrated this CPU
[ 0.411468] Switched to new clocking rate (Crystal/Core/MPU): 26.0/400/500 MHz
[ 0.420104] OMAP DMA hardware revision 5.0
[ 0.538330] bio: create slab at 0
[ 0.547882] machine_constraints_voltage: vads7846: override min_uV, 1 -> 3300000
[ 0.547912] machine_constraints_voltage: vads7846: override max_uV, 2147483647 -> 3300000
[ 0.547943] print_constraints: vads7846: 3300 mV
[ 0.553680] reg-fixed-voltage reg-fixed-voltage.1: vads7846 supplying 3300000uV
[ 0.559936] SCSI subsystem initialized
[ 0.578887] usbcore: registered new interface driver usbfs
[ 0.586669] usbcore: registered new interface driver hub
[ 0.593627] usbcore: registered new device driver usb
[ 0.605438] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
[ 0.624572] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.631103] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.639892] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.659362] machine_constraints_voltage: VUSB1V5: override min_uV, 1 -> 1500000
[ 0.659393] machine_constraints_voltage: VUSB1V5: override max_uV, 2147483647 -> 1500000
[ 0.659454] print_constraints: VUSB1V5: 1500 mV normal standby
[ 0.669067] machine_constraints_voltage: VUSB1V8: override min_uV, 1 -> 1800000
[ 0.669097] machine_constraints_voltage: VUSB1V8: override max_uV, 2147483647 -> 1800000
[ 0.669128] print_constraints: VUSB1V8: 1800 mV normal standby
[ 0.678497] machine_constraints_voltage: VUSB3V1: override min_uV, 1 -> 3100000
[ 0.678527] machine_constraints_voltage: VUSB3V1: override max_uV, 2147483647 -> 3100000
[ 0.678588] print_constraints: VUSB3V1: 3100 mV normal standby
[ 0.692016] twl4030_usb twl4030_usb: HW_CONDITIONS 0x10/16; link 0
[ 0.692932] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 0.706115] print_constraints: VMMC1: 1850 3150 mV at 3150 mV normal standby
[ 0.717285] print_constraints: VDAC: 1800 mV normal standby
[ 0.726379] print_constraints: VDVI: 1800 mV normal standby
[ 0.733642] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 400 kHz
[ 0.747100] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.758819] NetLabel: Initializing
[ 0.762817] NetLabel: domain hash size = 128
[ 0.767517] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.773193] NetLabel: unlabeled traffic allowed by default
[ 0.779235] Switching to clocksource 32k_counter
[ 0.898406] AppArmor: AppArmor Filesystem Enabled
[ 1.002136] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 1.015594] twl4030_usb twl4030_usb: twl4030_phy_resume
[ 1.016174] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 1.016235] musb-hdrc: MHDRC RTL version 1.800
[ 1.016235] musb-hdrc: setup fifo_mode 4
[ 1.016265] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 1.020263] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[ 1.029968] NET: Registered protocol family 2
[ 1.035614] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 1.045257] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.053924] TCP bind hash table entries: 16384 (order: 7, 589824 bytes)
[ 1.073577] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.080566] TCP reno registered
[ 1.084014] UDP hash table entries: 256 (order: 2, 20480 bytes)
[ 1.090728] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[ 1.098632] NET: Registered protocol family 1
[ 1.105377] RPC: Registered named UNIX socket transport module.
[ 1.111633] RPC: Registered udp transport module.
[ 1.116729] RPC: Registered tcp transport module.
[ 1.121765] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.129699] Trying to unpack rootfs image as initramfs...
[ 1.394500] Freeing initrd memory: 1948K
[ 1.410369] audit: initializing netlink socket (disabled)
[ 1.416473] type=2000 audit(1.359:1): initialized
[ 1.578979] Kprobe smoke test started
[ 1.615417] Kprobe smoke test passed successfully
[ 1.645721] JFFS2 version 2.2. (NAND) (SUMMARY) \xffffffc2\xffffffa9\xffffffa9 2001-2006 Red Hat, Inc.
[ 1.657806] Btrfs loaded
[ 1.660919] msgmni has been set to 961
[ 1.673034] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.681396] io scheduler noop registered
[ 1.685760] io scheduler deadline registered
[ 1.690521] io scheduler cfq registered (default)
[ 1.701049] OMAP DSS rev 2.0
[ 1.735717] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[ 1.747528] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[ 1.757049] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
[ 1.765014] console [ttyO2] enabled, bootconsole disabled
[ 1.778228] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
[ 1.789489] [drm] Initialized drm 1.1.0 20060810
[ 1.841827] brd: module loaded
[ 1.873931] loop: module loaded
[ 1.880889] twl4030_madc twl4030_madc: clk disabled, enabling
[ 1.897796] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.905578] omap2-nand driver initializing
[ 1.910705] ONFI flash detected
[ 1.914337] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
[ 1.923645] Creating 5 MTD partitions on "omap2-nand.0":
[ 1.929382] 0x000000000000-0x000000080000 : "xloader"
[ 1.946105] 0x000000080000-0x000000240000 : "uboot"
[ 1.959106] 0x000000240000-0x000000280000 : "uboot environment"
[ 1.972656] 0x000000280000-0x000000680000 : "linux"
[ 1.986572] 0x000000680000-0x000020000000 : "rootfs"
[ 2.278900] OneNAND driver initializing
[ 2.289825] smsc911x: Driver version 2008-10-21
[ 2.320526] smsc911x-mdio: probed
[ 2.324920] smsc911x smsc911x.0: eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
[ 2.335510] smsc911x smsc911x.0: eth0: MAC Address: 00:15:c9:28:f4:72
[ 2.342712] smsc911x: Driver version 2008-10-21
[ 2.349822] usbcore: registered new interface driver asix
[ 2.356536] usbcore: registered new interface driver cdc_ether
[ 2.363037] cdc_ncm: 04-Aug-2011
[ 2.367156] usbcore: registered new interface driver cdc_ncm
[ 2.375701] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.382995] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 2.383483] ehci-omap ehci-omap.0: failed to get ehci port1 regulator
[ 3.385894] ehci-omap ehci-omap.0: phy reset operation timed out
[ 3.385925] ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
[ 3.385955] ehci-omap ehci-omap.0: reset hcc_params 0016 thresh 1 uframes 256/512/1024 park
[ 3.385986] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 3.394622] drivers/usb/core/inode.c: creating file 'devices'
[ 3.395172] drivers/usb/core/inode.c: creating file '001'
[ 3.399047] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 3.407745] ehci-omap ehci-omap.0: park 0
[ 3.407836] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 3.414001] ehci-omap ehci-omap.0: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 3.414062] ehci-omap ehci-omap.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 3.425109] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 3.432586] usb usb1: default language 0x0409
[ 3.432800] usb usb1: udev 1, busnum 1, minor = 0
[ 3.432830] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.440063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.447753] usb usb1: Product: OMAP-EHCI Host Controller
[ 3.453460] usb usb1: Manufacturer: Linux 3.2.1-linaro-omap ehci_hcd
[ 3.460235] usb usb1: SerialNumber: ehci-omap.0
[ 3.468933] usb usb1: usb_probe_device
[ 3.468963] usb usb1: configuration #1 chosen from 1 choice
[ 3.470001] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 3.472229] hub 1-0:1.0: usb_probe_interface
[ 3.472290] hub 1-0:1.0: usb_probe_interface - got id
[ 3.472351] hub 1-0:1.0: USB hub found
[ 3.476623] hub 1-0:1.0: 3 ports detected
[ 3.481170] hub 1-0:1.0: standalone hub
[ 3.481201] hub 1-0:1.0: individual port power switching
[ 3.481231] hub 1-0:1.0: individual port over-current protection
[ 3.481262] hub 1-0:1.0: power on to power good time: 20ms
[ 3.481994] hub 1-0:1.0: local power source is good
[ 3.482025] hub 1-0:1.0: enabling power on all ports
[ 3.485473] drivers/usb/core/inode.c: creating file '001'
[ 3.486419] ehci-omap ehci-omap.0: ...powerup ports...
[ 3.511627] Initializing USB Mass Storage driver...
[ 3.517822] usbcore: registered new interface driver usb-storage
[ 3.524353] USB Mass Storage support registered.
[ 3.531219] usbcore: registered new interface driver libusual
[ 3.537963] gadget: using random self ethernet address
[ 3.543640] gadget: using random host ethernet address
[ 3.551910] usb0: MAC 8e:a6:8b:1a:e4:40
[ 3.555999] usb0: HOST MAC be:ce:c9:43:15:d9
[ 3.560943] gadget: Ethernet Gadget, version: Memorial Day 2008
[ 3.567504] gadget: g_ether ready
[ 3.571197] musb-hdrc musb-hdrc: MUSB HDRC host driver
[ 3.577026] drivers/usb/core/inode.c: creating file '002'
[ 3.579437] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 2
[ 3.588073] ehci-omap ehci-omap.0: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 3.588165] hub 1-0:1.0: port 2: status 0501 change 0001
[ 3.589141] usb usb2: default language 0x0409
[ 3.589294] usb usb2: udev 1, busnum 2, minor = 128
[ 3.589324] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.596527] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.604278] usb usb2: Product: MUSB HDRC host driver
[ 3.609588] usb usb2: Manufacturer: Linux 3.2.1-linaro-omap musb-hcd
[ 3.616394] usb usb2: SerialNumber: musb-hdrc
[ 3.623962] usb usb2: usb_probe_device
[ 3.623992] usb usb2: configuration #1 chosen from 1 choice
[ 3.624206] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 3.625823] hub 2-0:1.0: usb_probe_interface
[ 3.625854] hub 2-0:1.0: usb_probe_interface - got id
[ 3.625915] hub 2-0:1.0: USB hub found
[ 3.630493] hub 2-0:1.0: 1 port detected
[ 3.634674] hub 2-0:1.0: standalone hub
[ 3.634704] hub 2-0:1.0: individual port power switching
[ 3.634704] hub 2-0:1.0: no over-current protection
[ 3.634735] hub 2-0:1.0: Single TT
[ 3.634765] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 3.634796] hub 2-0:1.0: power on to power good time: 10ms
[ 3.634857] hub 2-0:1.0: 100mA bus power budget for each child
[ 3.635070] hub 2-0:1.0: local power source is good
[ 3.635101] hub 2-0:1.0: enabling power on all ports
[ 3.637817] drivers/usb/core/inode.c: creating file '001'
[ 3.642639] mousedev: PS/2 mouse device common for all mice
[ 3.656463] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
[ 3.673858] twl_rtc twl_rtc: Power up reset detected.
[ 3.683349] hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000
[ 3.683532] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 3.686737] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 3.696197] i2c /dev entries driver
[ 3.705413] Driver for 1-wire Dallas network protocol.
[ 3.719085] twl4030_usb twl4030_usb: HW_CONDITIONS 0x90/144; link 1
[ 3.745483] ehci-omap ehci-omap.0: port 2 high speed
[ 3.745544] ehci-omap ehci-omap.0: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 3.808044] usb 1-2: new high-speed USB device number 2 using ehci-omap
[ 3.878265] ehci-omap ehci-omap.0: port 2 high speed
[ 3.878326] ehci-omap ehci-omap.0: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 3.961242] Registered led device: overo:red:gpio21
[ 3.962463] Registered led device: overo:blue:gpio22
[ 3.966278] Registered led device: overo:blue:COM
[ 3.973144] usb 1-2: udev 2, busnum 1, minor = 1
[ 3.973175] usb 1-2: New USB device found, idVendor=2001, idProduct=f103
[ 3.982818] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.997924] usb 1-2: usb_probe_device
[ 3.997955] usb 1-2: configuration #1 chosen from 1 choice
[ 3.998901] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
[ 4.000823] hub 1-2:1.0: usb_probe_interface
[ 4.000854] hub 1-2:1.0: usb_probe_interface - got id
[ 4.000946] hub 1-2:1.0: USB hub found
[ 4.007202] hub 1-2:1.0: 7 ports detected
[ 4.013458] hub 1-2:1.0: standalone hub
[ 4.013488] hub 1-2:1.0: individual port power switching
[ 4.013488] hub 1-2:1.0: individual port over-current protection
[ 4.013519] hub 1-2:1.0: Single TT
[ 4.013549] hub 1-2:1.0: TT requires at most 16 FS bit times (1332 ns)
[ 4.013580] hub 1-2:1.0: power on to power good time: 100ms
[ 4.015136] hub 1-2:1.0: local power source is good
[ 4.015167] hub 1-2:1.0: enabling power on all ports
[ 4.019836] drivers/usb/core/inode.c: creating file '002'
[ 4.020477] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 4.028656] usbcore: registered new interface driver usbhid
[ 4.035461] usbhid: USB HID core driver
[ 4.040252] omap-iommu omap-iommu.0: isp registered
[ 4.058410] overo SoC init
[ 4.113800] hub 1-2:1.0: port 5: status 0101 change 0001
[ 4.157653] asoc: twl4030-hifi omap-mcbsp-dai.1 mapping ok
[ 4.175872] ALSA device list:
[ 4.179077] #0: overo
[ 4.181671] oprofile: hardware counters not available
[ 4.187255] oprofile: using timer interrupt.
[ 4.194061] TCP cubic registered
[ 4.197509] Initializing XFRM netlink socket
[ 4.203094] NET: Registered protocol family 10
[ 4.211914] IPv6 over IPv4 tunneling driver
[ 4.216674] usb 1-2: link qh256-0001/de0b6d00 start 1 [1/0 us]
[ 4.216857] hub 1-2:1.0: state 7 ports 7 chg 0020 evt 0000
[ 4.217437] hub 1-2:1.0: port 5, status 0101, change 0000, 12 Mb/s
[ 4.221008] NET: Registered protocol family 17
[ 4.226165] NET: Registered protocol family 15
[ 4.231597] Registering the dns_resolver key type
[ 4.238800] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 4.247283] ThumbEE CPU extension supported.
[ 4.269653] sr_init: No PMIC hook to init smartreflex
[ 4.275543] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[ 4.286346] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[ 4.300415] usb 1-2.5: new full-speed USB device number 3 using ehci-omap
[ 4.354003] clock: disabling unused clocks to save power
[ 4.367401] fbcvt: 1024x768@60: CVT Name - .786M3-R
[ 4.391876] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 4.394958] mmc0: new high speed SDHC card at address b368
[ 4.416809] mmcblk0: mmc0:b368 00000 7.51 GiB
[ 4.432312] mmcblk0: p1 p2
[ 4.448699] usb 1-2.5: ep0 maxpacket = 8
[ 4.449768] usb 1-2.5: udev 3, busnum 1, minor = 2
[ 4.449798] usb 1-2.5: New USB device found, idVendor=0557, idProduct=2008
[ 4.449829] usb 1-2.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.456787] usb 1-2.5: usb_probe_device
[ 4.456817] usb 1-2.5: configuration #1 chosen from 1 choice
[ 4.457427] usb 1-2.5: adding 1-2.5:1.0 (config #1, interface 0)
[ 4.461059] drivers/usb/core/inode.c: creating file '003'
[ 4.466583] Console: switching to colour frame buffer device 128x48
[ 4.518554] regulator_init_complete: VDAC: incomplete constraints, leaving on
[ 4.526947] regulator_init_complete: vads7846: incomplete constraints, leaving on
[ 4.538726] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 4.551971] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:13 UTC (946684813)
[ 4.565795] Freeing init memory: 356K
[ 4.879302] udevd[731]: starting version 175
[ 6.057952] hub 2-0:1.0: hub_suspend
[ 6.058898] usb usb2: bus auto-suspend, wakeup 1
[ 6.715026] kjournald starting. Commit interval 5 seconds
[ 6.727264] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[ 8.412567] init: ureadahead main process (828) terminated with status 5
[ 10.407073] udevd[895]: starting version 175
[ 11.318450] EXT3-fs (mmcblk0p2): using internal journal
[ 12.815216] ads7846 spi1.0: touchscreen, irq 274
[ 12.829498] ads7846 spi1.0: no device detected, test read result was 0x00000FFF
[ 18.410339] usbcore: registered new interface driver usbserial
[ 18.411834] USB Serial support registered for generic
[ 18.412048] usbserial_generic 1-2.5:1.0: usb_probe_interface
[ 18.412078] usbserial_generic 1-2.5:1.0: usb_probe_interface - got id
[ 18.412872] usbcore: registered new interface driver usbserial_generic
[ 18.530975] USB Serial support registered for pl2303
[ 18.531249] pl2303 1-2.5:1.0: usb_probe_interface
[ 18.531280] pl2303 1-2.5:1.0: usb_probe_interface - got id
[ 18.531494] pl2303 1-2.5:1.0: pl2303 converter detected
[ 18.646820] usb 1-2.5: pl2303 converter now attached to ttyUSB0
[ 18.647552] usbcore: registered new interface driver pl2303
[ 18.647583] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 19.826477] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xe0888000, IRQ: 336
[ 19.903503] eth0: IPv6 duplicate address fe80::215:c9ff:fe28:f472 detected!
[ 26.349426] Bluetooth: Core ver 2.16
[ 26.369903] NET: Registered protocol family 31
[ 26.369934] Bluetooth: HCI device and connection manager initialized
[ 26.375518] Bluetooth: HCI socket layer initialized
[ 26.377075] Bluetooth: L2CAP socket layer initialized
[ 26.377655] Bluetooth: SCO socket layer initialized
[ 27.267974] Bluetooth: RFCOMM TTY layer initialized
[ 27.268096] Bluetooth: RFCOMM socket layer initialized
[ 27.268127] Bluetooth: RFCOMM ver 1.11
[ 28.505462] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.505493] Bluetooth: BNEP filters: protocol multicast
[ 32.356506] init: failsafe main process (1098) killed by TERM signal
[ 33.931457] usb 1-2.5: link qh1-0e01/de6e1b40 start 0 [1/2 us]
[ 38.917907] init: tty1 main process (1360) killed by TERM signal
[ 41.862762] ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 46.144958] usb 1-2.5: unlink qh1-0e01/de6e1b40 start 0 [1/2 us]
[ 46.150207] ehci-omap ehci-omap.0: reused qh de6e1b40 schedule
[ 46.150238] usb 1-2.5: link qh1-0e01/de6e1b40 start 0 [1/2 us]
[ 52.144348] usb 1-2: clear tt buffer port 5, a3 ep3 t81008d82
[ 52.146881] usb 1-2.5: unlink qh1-0e01/de6e1b40 start 0 [1/2 us]
[ 393.624694] ehci-omap ehci-omap.0: reused qh de6e1b40 schedule
[ 393.624755] usb 1-2.5: link qh1-0e01/de6e1b40 start 0 [1/2 us]
[ 424.507781] usb 1-2: clear tt buffer port 5, a3 ep3 t81008d82
[ 424.508300] usb 1-2.5: unlink qh1-0e01/de6e1b40 start 0 [1/2 us]
[ 447.697540] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0004
[ 447.697723] ehci-omap ehci-omap.0: GetStatus port:2 status 001002 0 ACK POWER sig=se0 CSC
[ 447.697875] hub 1-0:1.0: port 2, status 0100, change 0001, 12 Mb/s
[ 447.697906] usb 1-2: USB disconnect, device number 2
[ 447.697967] usb 1-2.5: USB disconnect, device number 3
[ 447.697998] usb 1-2.5: unregistering device
[ 447.698028] usb 1-2.5: unregistering interface 1-2.5:1.0
[ 447.737915] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
[ 447.753662] pl2303 1-2.5:1.0: device disconnected
[ 447.756042] usb 1-2.5: usb_disable_device nuking all URBs
[ 447.839447] usb 1-2: unregistering device
[ 447.839477] usb 1-2: unregistering interface 1-2:1.0
[ 447.841369] usb 1-2: unlink qh256-0001/de0b6d00 start 1 [1/0 us]
[ 447.841583] ehci-omap ehci-omap.0: shutdown urb de07df40 ep1in-intr
[ 447.858123] usb 1-2: usb_disable_device nuking all URBs
[ 448.026702] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
[ 450.057922] hub 1-0:1.0: hub_suspend
[ 450.058013] usb usb1: bus auto-suspend, wakeup 1
[ 450.058044] ehci-omap ehci-omap.0: suspend root hub
[ 9730.005096] mmcblk0: timed out sending r/w cmd command, card status 0xe00
[ 9730.013183] end_request: I/O error, dev mmcblk0, sector 12122360
[ 9730.019531] Buffer I/O error on device mmcblk0p2, logical block 1501983
[ 9730.026519] lost page write due to I/O error on mmcblk0p2
[ 9730.028503] mmcblk0: timed out sending r/w cmd command, card status 0x400e00
[ 9730.037780] mmcblk0: timed out sending r/w cmd command, card status 0x400e00
[13169.569763] mmcblk0: timed out sending r/w cmd command, card status 0xe00
[13169.577789] end_request: I/O error, dev mmcblk0, sector 11544888
[13169.584136] Buffer I/O error on device mmcblk0p2, logical block 1429799
[13169.591094] lost page write due to I/O error on mmcblk0p2
[13169.593231] mmcblk0: timed out sending r/w cmd command, card status 0x400e00