dmesg - cubie
Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Linux version 3.4.19-a10-aufs+ (max@lynx) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-1ubuntu1) ) #8 PREEMPT Mon Jan 14 21:54:09 CET 2013
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun4i
Memory cut off:
MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
Ignoring unrecognised tag 0x00000000
Memory Reserved:
SYS : 0x43000000 - 0x4300ffff ( 64 kB)
VE : 0x44000000 - 0x48ffffff ( 80 MB)
G2D : 0x58000000 - 0x58ffffff ( 16 MB)
LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
Memory policy: ECC disabled, Data cache writeback
chip-id: A10 (AW1623 revision C)
On node 0 totalpages: 245760
free_area_init_node: node 0, pgdat c06c8ab0, node_mem_map c0874000
Normal zone: 1520 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 176656 pages, LIFO batch:31
HighMem zone: 528 pages used for memmap
HighMem zone: 67056 pages, LIFO batch:15
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
Kernel command line: console=tty0 disp.screen0_output_mode=EDID:1280x720p60 hdmi.audio=EDID:0 bootmenutimeout=10 datadev=mmcblk0p2 mac_addr=2a:4c:4a:97:bf:db
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 448MB 512MB = 960MB total
Memory: 826672k/826672k available, 156368k reserved, 270336K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0653000 (6444 kB)
.init : 0xc0653000 - 0xc067f000 ( 176 kB)
.data : 0xc0680000 - 0xc06c9520 ( 294 kB)
.bss : 0xc06c9544 - 0xc08738d8 (1705 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:96
timer0: Periodic Mode
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
Console: colour dummy device 80x30
console [tty0] enabled
Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
CPU: Testing write buffer coherency: ok
hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
Setting up static identity map for 0x40496448 - 0x404964a0
devtmpfs: initialized
dummy:
NET: Registered protocol family 16
hw-breakpoint: debug architecture 0x4 unsupported.
[ccmu] try to set apb1 parent to sata_pll failed!
SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
Initialize DMAC OK
bio: create slab at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Init eGon pin module V2.0
Switching to clocksource aw 64bits couter
FS-Cache: Loaded
CacheFiles: Loaded
[usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
[sw_hcd0]: usb host driver initialize........
[sw_udc]: udc_init: version 20080411
[sw_udc]: usb_vbase = 0xf1c13000
[sw_udc]: sram_vbase = 0xf1c00000
[sw_udc]: open_usb_clock
udc->driver is null, udc is need not stop
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 8044K
[pm]aw_pm_init!
audit: initializing netlink socket (disabled)
type=2000 audit(0.579:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.18)
aufs 3.4-20121210
msgmni has been set to 1102
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
sunxi disp driver loaded (/dev/disp api 1.0)
[uart]: used uart info.: 0x05
sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
[uart]: serial probe 0, membase (null) irq 1 mapbase 0x01c28000
sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
[uart]: serial probe 2, membase (null) irq 3 mapbase 0x01c28800
G2D: drv_g2d_init
G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
G2D: head:d8000000,tail:d9000000
G2D: Module initialized.major:251
brd: module loaded
loop: module loaded
[NAND]nand driver, init.
cmu_clk is 480
nand clk init end
offset 0xc: 0x26141
offset 0x14: 0x8200000b
[NAND] nand gpio_request
[NAND] nand driver version: 0x2 0x9
nand interrupte register ok
ret of NFC_ChangMode is 0
dma_hdle is 0
dma_hdle is 10000008
cmu_clk is 480
nand clk init end
offset 0xc: 0x26141
offset 0x14: 0x82000007
The 0 disk name = DEVICE, class name = NAND, disk start = 0, disk size = 7979008
The 1 disk name = bootloader, class name = DISK, disk size = 32768
The 2 disk name = env, class name = DISK, disk size = 32768
The 3 disk name = boot, class name = DISK, disk size = 65536
The 4 disk name = misc, class name = DISK, disk size = 32768
The 5 disk name = recovery, class name = DISK, disk size = 65536
The 6 disk name = private, class name = DISK, disk size = 32768
The 7 disk name = sysrecovery, class name = DISK, disk size = 655360
The 8 disk name = UDISK, class name = DISK, disk size = 4816896
The 8 disk size = 5062656
part total count = 9
nand: unknown partition table
nanda:
nandb: unknown partition table
nandc: unknown partition table
nandd: unknown partition table
nande: unknown partition table
nandf:
nandg: unknown partition table
nandh:
benn: nand probe enter
[NAND]nand driver, ok.
sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
scsi0 : sw_ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 56
[EMAC] ahb clk enable
[EMAC] ahb gate clk: 0x2026141
MAC address: 2a:4c:4a:97:bf:db
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[sw-ehci1]: open clock
[sw-ehci1]: Set USB Power ON
sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
ehci_irq: port change detect
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
[sw-ohci1]: open clock
sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
[sw-ehci2]: open clock
[sw-ehci2]: Set USB Power ON
sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
[sw-ohci2]: open clock
sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums_eneub6250
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-realtek
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
mousedev: PS/2 mouse device common for all mice
sunxi RTC version 0.1
sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380248073
[RTC] ERR: Set LOSC to external failed!!!
[RTC] WARNING: Rtc time will be wrong!!
sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
i2c /dev entries driver
!!! base_Addr = 0xf1c2ac00
config i2c gpio with gpio_config api
twi0, apb clock = 24000000
axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
I2C: i2c-0: AW16XX I2C adapter
**********start************
0x40
0xf8
0x28
0x0
0x0
**********end************
!!! base_Addr = 0xf1c2b000
twi1, apb clock = 24000000
I2C: i2c-1: AW16XX I2C adapter
**********start************
0x40
0xf8
0x58
0x0
0x0
**********end************
!!! base_Addr = 0xf1c2b400
twi2, apb clock = 24000000
I2C: i2c-2: AW16XX I2C adapter
**********start************
0x40
0xf8
0x58
0x0
0x0
**********end************
lirc_dev: IR Remote Control driver registered, major 250
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR LIRC bridge handler initialized
[cedar dev]: install start!!!
[cedar dev]: install end!!!
[ace_drv] start!!!
[ace_drv] init end!!!
[pa_drv] start!!!
[pa_drv] init end!!!
axp20_ldo1: 1300 mV
axp20_ldo2: 1800 3300 mV at 3000 mV
axp20_ldo3: 700 3500 mV at 2800 mV
axp20_ldo4: 1250 3300 mV at 2800 mV
axp20_buck2: 700 2275 mV at 1400 mV
axp20_buck3: 700 3500 mV at 1250 mV
axp20_ldoio0: 1800 3300 mV at 2800 mV
input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
cpuidle: using governor ladder
cpuidle: using governor menu
[mmc_pm]: no sdio card used in configuration
[mmc]: sunximmc_init
[mmc]: sunxi mmc controller using config : 0x9
[mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
[mmc]: mmc 0 power off !!
[mmc]: mmc0 Probe: base:0xf1c0f000 irq:32 dma:0 pdes:0xef3e4000, ret 0.
[mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
[mmc]: mmc 3 power off !!
[mmc]: mmc3 Probe: base:0xf1c12000 irq:35 dma:0 pdes:0xef3ec000, ret 0.
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
enter sun4i Audio codec!!!
slots (null) modulename (null) idx 1
sun4i audio support initialized
sun4i Audio codec successfully loaded..
soc-audio soc-audio.0: ASoC machine sun4i-sndhdmi should use snd_soc_register_card()
slots (null) modulename (null) idx -1
asoc: sndhdmi sun4i-hdmiaudio.0 mapping ok
IPv4 over IPv4 tunneling driver
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
8021q: 802.1Q VLAN Support v1.8
[mmc_pm]: No sdio card, please check your config !!
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
Registering SWP/SWPB emulation handler
registered taskstats version 1
ata1: SATA link down (SStatus 0 SControl 300)
usb 1-1: new high-speed USB device number 2 using sw-ehci
ParseEDID
DDC_Init
EDID ready
DDC_Read
Sink : EDID bank 0:
0 1 2 3 4 5 6 7 8 9 A B C D E F
===============================================================================================
00 ff ff ff ff ff ff 00 4c 2d c0 07 00 00 00 00
2e 14 01 03 80 59 32 78 0a ee 91 a3 54 4c 99 26
0f 50 54 bd ef 80 71 4f 81 00 81 40 81 80 95 00
95 0f b3 00 a9 40 02 3a 80 18 71 38 2d 40 58 2c
45 00 a0 5a 00 00 00 1e 66 21 50 b0 51 00 1b 30
40 70 36 00 a0 5a 00 00 00 1e 00 00 00 fd 00 18
4b 1a 51 17 00 0a 20 20 20 20 20 20 00 00 00 fc
00 53 41 4d 53 55 4e 47 0a 20 20 20 20 20 01 5e
===============================================================================================
EDID version: 1.3
PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
Using above mode as preferred EDID mode
PCLK=85500000 X 1360 1424 1536 1792 Y 768 771 777 795 fr 60 PP
DDC_Read
Sink : EDID bank 1:
0 1 2 3 4 5 6 7 8 9 A B C D E F
===============================================================================================
02 03 23 f1 4b 90 1f 04 13 05 14 03 12 20 21 22
23 09 07 07 83 01 00 00 e2 00 0f 67 03 0c 00 20
00 b8 2d 01 1d 00 72 51 d0 1e 20 6e 28 55 00 a0
5a 00 00 00 1e 01 1d 00 bc 52 d0 1e 20 b8 28 55
40 a0 5a 00 00 00 1e 01 1d 80 18 71 1c 16 20 58
2c 25 00 a0 5a 00 00 00 9e 01 1d 80 d0 72 1c 16
20 10 2c 25 80 a0 5a 00 00 00 9e 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fd
===============================================================================================
Parse_VideoData_Block: VIC 16 (native) support
Parse_VideoData_Block: VIC 31 support
Parse_VideoData_Block: VIC 4 support
Parse_VideoData_Block: VIC 19 support
Parse_VideoData_Block: VIC 5 support
Parse_VideoData_Block: VIC 20 support
Parse_VideoData_Block: VIC 3 support
Parse_VideoData_Block: VIC 18 support
Parse_VideoData_Block: VIC 32 support
Parse_VideoData_Block: VIC 33 support
Parse_VideoData_Block: VIC 34 support
Parse_AudioData_Block: max channel=2
Parse_AudioData_Block: SampleRate code=7
Parse_AudioData_Block: WordLen code=7
Find HDMI Vendor Specific DataBlock
PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
PCLK=74250000 X 1920 2448 2492 2640 Y 540 542 547 562 fr 50 PP
waited 80 ms for EDID info
disp clks: lcd 148500000 lcd_div 1 hdmi 148500000 pll 297000000 2x 0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.3: new low-speed USB device number 3 using sw-ehci
input: Logitech USB Optical Mouse as /devices/platform/sw-ehci.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input1
generic-usb 0003:046D:C046.0001: input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-sw-ehci-1.3/input0
usb 1-1.4: new low-speed USB device number 4 using sw-ehci
input: Logitech Logitech USB Keyboard as /devices/platform/sw-ehci.1/usb1/1-1/1-1.4/1-1.4:1.0/input/input2
generic-usb 0003:046D:C315.0002: input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-sw-ehci-1.4/input0
[mmc]: mmc 0 detect change, present 1
[mmc]: mmc 0 power on !!
[mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
[mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
[mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
mmc0: new high speed SDHC card at address 1234
mmcblk0: mmc0:1234 SA16G 14.6 GiB
mmcblk0: p1 p2
Console: switching to colour frame buffer device 240x67
axp20_buck3: incomplete constraints, leaving on
axp20_buck2: incomplete constraints, leaving on
axp20_ldo4: incomplete constraints, leaving on
axp20_ldo3: incomplete constraints, leaving on
axp20_ldo2: incomplete constraints, leaving on
axp20_ldo1: incomplete constraints, leaving on
sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
ALSA device list:
#0: sun4i-sndhdmi
#1: sun4i-CODEC Audio Codec
Freeing init memory: 176K
EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 269521
EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 269332
EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 269331
EXT4-fs (mmcblk0p2): 3 orphan inodes deleted
EXT4-fs (mmcblk0p2): recovery complete
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
UMP: Inserting UMP device driver. Compiled: Dec 28 2012, time: 23:41:05
UMP: Using OS memory backend, allocation limit: 134217728
UMP: UMP device driver loaded
mali: use config clk_div 4
mali: clk_div 4
Mali: mali clock set completed, clock is 240000000 Mhz
mali: use config clk_div 4
mali: clk_div 4
Mali: mali clock set completed, clock is 240000000 Mhz
Mali: Mali device driver loaded
[drm] Initialized drm 1.1.0 20060810
Mali DRM initialize, driver name: mali_drm, version 2.1
[drm] Initialized mali_drm 2.1.1 20101111 on minor 0
Mali DRM initialize, driver name: mali_drm, version 2.1
[drm] Initialized mali_drm 2.1.1 20101111 on minor 1
usbcore: registered new interface driver rtl8192cu
usbcore: registered new interface driver qf9700
init: ureadahead main process (80) terminated with status 5
[mmc_pm]: No sdio card, please check your config !!
udevd[173]: starting version 175
init: failsafe main process (346) killed by TERM signal
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process ended, respawning
wemac wemac.0: WARNING: no IRQ resource flags set.
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process ended, respawning
wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
init: tty1 main process (435) killed by TERM signal
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process ended, respawning
init: auto-serial-console respawning too fast, stopped
init: tty4 main process (386) killed by TERM signal
init: tty5 main process (387) killed by TERM signal
init: tty2 main process (400) killed by TERM signal
init: tty3 main process (401) killed by TERM signal
init: tty6 main process (405) killed by TERM signal
init: anacron main process (413) killed by TERM signal
init: cron main process (410) killed by TERM signal
init: openvt main process (466) killed by TERM signal
init: lightdm main process (409) killed by KILL signal
init: upstart-udev-bridge main process ended, respawning
init: udev main process ended, respawning
init: rsyslog main process ended, respawning
init: Disconnected from system bus
init: dbus main process ended, respawning
udevd[757]: starting version 175
init: plymouth main process (737) killed by ABRT signal
init: plymouth-upstart-bridge main process (810) terminated with status 1
init: dbus main process (808) killed by KILL signal
init: dbus main process ended, respawning
init: udev main process (757) killed by KILL signal
init: udev main process ended, respawning
init: upstart-udev-bridge main process (764) killed by KILL signal
init: upstart-udev-bridge main process ended, respawning
init: rsyslog main process (774) killed by KILL signal
init: rsyslog main process ended, respawning
init: Disconnected from system bus
udevd[852]: starting version 175
init: plymouth-stop pre-start process (865) terminated with status 1
init: plymouth-upstart-bridge main process (870) terminated with status 1
ehci_irq: port change detect
hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
ehci_irq: port change detect
usb 1-1: USB disconnect, device number 2
usb 1-1.3: USB disconnect, device number 3
generic-usb 0003:046D:C315.0002: can't reset device, sw-ehci-1.4/input0, status -71
usb 1-1.4: USB disconnect, device number 4
usb 1-1: clear tt 1 (0040) error -19
usb 1-1: new high-speed USB device number 5 using sw-ehci
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.3: new low-speed USB device number 6 using sw-ehci
input: Logitech USB Optical Mouse as /devices/platform/sw-ehci.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input3
generic-usb 0003:046D:C046.0003: input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-sw-ehci-1.3/input0
usb 1-1.4: new low-speed USB device number 7 using sw-ehci
input: Logitech Logitech USB Keyboard as /devices/platform/sw-ehci.1/usb1/1-1/1-1.4/1-1.4:1.0/input/input4
generic-usb 0003:046D:C315.0004: input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-sw-ehci-1.4/input0
wemac wemac.0: WARNING: no IRQ resource flags set.
wemac wemac.0: eth0: link down
wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1