dmesg - test
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000b7fb0000 (usable)
BIOS-e820: 00000000b7fb0000 - 00000000b7fc0000 (ACPI data)
BIOS-e820: 00000000b7fc0000 - 00000000b7ff0000 (ACPI NVS)
BIOS-e820: 00000000b7ff0000 - 00000000b8000000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000248000000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./M3A770DE , BIOS P1.70 09/07/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x248000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFE0000000 write-back
2 base 0000A0000000 mask FFFFF0000000 write-back
3 base 0000B0000000 mask FFFFF8000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000248000000 aka 9344M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000b8000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xb7fb0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000b7fb0000
0000000000 - 0080000000 page 1G
0080000000 - 00b7e00000 page 2M
00b7e00000 - 00b7fb0000 page 4k
kernel direct mapping tables up to b7fb0000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-0000000248000000
0100000000 - 0240000000 page 1G
0240000000 - 0248000000 page 2M
kernel direct mapping tables up to 248000000 @ b7fae000-b7fb0000
RAMDISK: 36ab4000 - 37552000
ACPI: RSDP 00000000000fa590 00014 (v00 ACPIAM)
ACPI: RSDT 00000000b7fb0000 00040 (v01 090710 RSDT1722 20100907 MSFT 00000097)
ACPI: FACP 00000000b7fb0200 00084 (v02 A_M_I OEMFACP 12000601 MSFT 00000097)
ACPI: DSDT 00000000b7fb0450 089BC (v01 AS250 AS250163 00000163 INTL 20051117)
ACPI: FACS 00000000b7fc0000 00040
ACPI: APIC 00000000b7fb0390 0007C (v01 090710 APIC1722 20100907 MSFT 00000097)
ACPI: MCFG 00000000b7fb0410 0003C (v01 090710 OEMMCFG 20100907 MSFT 00000097)
ACPI: OEMB 00000000b7fc0040 00071 (v01 090710 OEMB1722 20100907 MSFT 00000097)
ACPI: SRAT 00000000b7fb8e10 000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: AAFT 00000000b7fb8f00 00027 (v01 090710 OEMAAFT 20100907 MSFT 00000097)
ACPI: SSDT 00000000b7fb8f30 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-b8000000
SRAT: Node 0 PXM 0 100000000-248000000
NUMA: Node 0 [0,a0000) + [100000,b8000000) -> [0,b8000000)
NUMA: Node 0 [0,b8000000) + [100000000,248000000) -> [0,248000000)
Initmem setup node 0 0000000000000000-0000000248000000
NODE_DATA [0000000247ffb000 - 0000000247ffffff]
[ffffea0000000000-ffffea0007ffffff] PMD -> [ffff88023f600000-ffff8802467fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00248000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000b7fb0
0: 0x00100000 -> 0x00248000
On node 0 totalpages: 2096959
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3922 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 735208 pages, LIFO batch:31
Normal zone: 18368 pages used for memmap
Normal zone: 1325120 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 6 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e7000
PM: Registered nosave memory: 00000000000e7000 - 0000000000100000
PM: Registered nosave memory: 00000000b7fb0000 - 00000000b7fc0000
PM: Registered nosave memory: 00000000b7fc0000 - 00000000b7ff0000
PM: Registered nosave memory: 00000000b7ff0000 - 00000000b8000000
PM: Registered nosave memory: 00000000b8000000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Allocating PCI resources starting at b8000000 (gap: b8000000:47f00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880247c00000 s82880 r8192 d23616 u262144
pcpu-alloc: s82880 r8192 d23616 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064250
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 8000000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ ac000000
PM: Registered nosave memory: 00000000ac000000 - 00000000b0000000
Memory: 8119444k/9568256k available (3418k kernel code, 1180420k absent, 268392k reserved, 3319k data, 576k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:33024 nr_irqs:728 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 3193.063 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.12 BogoMIPS (lpj=12772252)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 840 Processor stepping 03
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
#3
smpboot cpu 3: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (25545.05 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at b7fc0000 (196608 bytes)
print_constraints: dummy:
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000b8000000 aka 2944M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [b8000000, dfffffff]
TOM2: 0000000248000000 aka 9344M
bus: [00, 07] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0xf0000000-0xffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
bus: 00 index 3 [mem 0xb8000000-0xdfffffff]
bus: 00 index 4 [mem 0x248000000-0xfcffffffff]
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 5 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xb8000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1002:597a] type 1 class 0x000604
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [1002:597e] type 1 class 0x000604
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
pci 0000:00:11.0: reg 24: [mem 0xf9dff800-0xf9dffbff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xf9dfe000-0xf9dfefff]
pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
pci 0000:00:12.1: reg 10: [mem 0xf9dfd000-0xf9dfdfff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xf9dff000-0xf9dff0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xf9dfc000-0xf9dfcfff]
pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
pci 0000:00:13.1: reg 10: [mem 0xf9dfb000-0xf9dfbfff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xf9dfa800-0xf9dfa8ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xf9df4000-0xf9df7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
pci 0000:00:14.5: reg 10: [mem 0xf9df9000-0xf9df9fff]
pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
pci 0000:03:00.0: [10de:11c0] type 0 class 0x000300
pci 0000:03:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:03:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
pci 0000:03:00.0: reg 24: [io 0xe800-0xe87f]
pci 0000:03:00.0: reg 30: [mem 0xfea80000-0xfeafffff pref]
pci 0000:03:00.1: [10de:0e0b] type 0 class 0x000403
pci 0000:03:00.1: reg 10: [mem 0xfea7c000-0xfea7ffff]
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10de:05e3] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xfc000000-0xfcffffff]
pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0xd800-0xd87f]
pci 0000:02:00.0: reg 30: [mem 0xf9f80000-0xf9ffffff pref]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xf9f00000-0xfcffffff]
pci 0000:00:04.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03
pci 0000:04:00.0: reg 10: [mem 0xfebfe000-0xfebfffff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot
pci 0000:00:09.0: PCI bridge to [bus 04-04]
pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:01:00.0: reg 10: [io 0xc800-0xc8ff]
pci 0000:01:00.0: reg 18: [mem 0xbffff000-0xbfffffff 64bit pref]
pci 0000:01:00.0: reg 20: [mem 0xbfff8000-0xbfffbfff 64bit pref]
pci 0000:01:00.0: reg 30: [mem 0xf9ee0000-0xf9efffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 01-01]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xf9e00000-0xf9efffff]
pci 0000:00:0a.0: bridge window [mem 0xbff00000-0xbfffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xb8000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
vgaarb: bridge control possible 0000:03:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 00000000b7fb0000 - 00000000b7ffffff
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xb8000000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io 0x0000-0x000f]
pnp 00:01: [io 0x0081-0x0083]
pnp 00:01: [io 0x0087]
pnp 00:01: [io 0x0089-0x008b]
pnp 00:01: [io 0x008f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x0070-0x0071]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io 0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io 0x00f0-0x00ff]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io 0x02f8-0x02ff]
pnp 00:05: [irq 3]
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0510 (active)
pnp 00:06: [mem 0xfed00000-0xfed003ff]
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:07: [io 0x0060]
pnp 00:07: [io 0x0064]
pnp 00:07: [mem 0xfec00000-0xfec00fff]
pnp 00:07: [mem 0xfee00000-0xfee00fff]
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0022-0x003f]
pnp 00:08: [io 0x0062-0x0063]
pnp 00:08: [io 0x0065-0x006f]
pnp 00:08: [io 0x0072-0x007f]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x00a2-0x00bf]
pnp 00:08: [io 0x00b1]
pnp 00:08: [io 0x00e0-0x00ef]
pnp 00:08: [io 0x04d0-0x04d1]
pnp 00:08: [io 0x040b]
pnp 00:08: [io 0x04d6]
pnp 00:08: [io 0x0c00-0x0c01]
pnp 00:08: [io 0x0c14]
pnp 00:08: [io 0x0c50-0x0c51]
pnp 00:08: [io 0x0c52]
pnp 00:08: [io 0x0c6c]
pnp 00:08: [io 0x0c6f]
pnp 00:08: [io 0x0cd0-0x0cd1]
pnp 00:08: [io 0x0cd2-0x0cd3]
pnp 00:08: [io 0x0cd4-0x0cd5]
pnp 00:08: [io 0x0cd6-0x0cd7]
pnp 00:08: [io 0x0cd8-0x0cdf]
pnp 00:08: [io 0x0800-0x089f]
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0b00-0x0b0f]
pnp 00:08: [io 0x0b20-0x0b3f]
pnp 00:08: [io 0x0900-0x090f]
pnp 00:08: [io 0x0910-0x091f]
pnp 00:08: [io 0xfe00-0xfefe]
pnp 00:08: [mem 0xffb80000-0xffbfffff]
pnp 00:08: [mem 0xfec10000-0xfec1001f]
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x040b] has been reserved
system 00:08: [io 0x04d6] has been reserved
system 00:08: [io 0x0c00-0x0c01] has been reserved
system 00:08: [io 0x0c14] has been reserved
system 00:08: [io 0x0c50-0x0c51] has been reserved
system 00:08: [io 0x0c52] has been reserved
system 00:08: [io 0x0c6c] has been reserved
system 00:08: [io 0x0c6f] has been reserved
system 00:08: [io 0x0cd0-0x0cd1] has been reserved
system 00:08: [io 0x0cd2-0x0cd3] has been reserved
system 00:08: [io 0x0cd4-0x0cd5] has been reserved
system 00:08: [io 0x0cd6-0x0cd7] has been reserved
system 00:08: [io 0x0cd8-0x0cdf] has been reserved
system 00:08: [io 0x0800-0x089f] has been reserved
system 00:08: [io 0x0b00-0x0b0f] has been reserved
system 00:08: [io 0x0b20-0x0b3f] has been reserved
system 00:08: [io 0x0900-0x090f] has been reserved
system 00:08: [io 0x0910-0x091f] has been reserved
system 00:08: [io 0xfe00-0xfefe] has been reserved
system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: [irq 4]
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0a: [io 0x0280-0x028f]
pnp 00:0a: [io 0x0290-0x029f]
system 00:0a: [io 0x0280-0x028f] has been reserved
system 00:0a: [io 0x0290-0x029f] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xe0000000-0xefffffff]
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x000c0000-0x000cffff]
pnp 00:0c: [mem 0x000e0000-0x000fffff]
pnp 00:0c: [mem 0x00100000-0xb7ffffff]
pnp 00:0c: [mem 0xfec00000-0xffffffff]
pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x00100000-0xb7ffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xf9f00000-0xfcffffff]
pci 0000:00:04.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 04-04]
pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:0a.0: PCI bridge to [bus 01-01]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xf9e00000-0xf9efffff]
pci 0000:00:0a.0: bridge window [mem 0xbff00000-0xbfffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 05-05]
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0a.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xb8000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfd000000-0xfeafffff]
pci_bus 0000:03: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xfcffffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xf9e00000-0xf9efffff]
pci_bus 0000:01: resource 2 [mem 0xbff00000-0xbfffffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0xb8000000-0xdfffffff]
pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 10872k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ ac000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1358100746.160:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 16008
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:04.0: setting latency timer to 64
pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
pcieport 0000:00:09.0: irq 42 for MSI/MSI-X
pcieport 0000:00:0a.0: setting latency timer to 64
pcieport 0000:00:0a.0: irq 43 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2013-01-13 18:12:27 UTC (1358100747)
Initializing network drop monitor service
Freeing unused kernel memory: 576k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 660k freed
Freeing unused kernel memory: 680k freed
udevd[58]: starting version 175
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xf9dff000
libata version 3.00 loaded.
xhci_hcd 0000:04:00.0: setting latency timer to 64
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:04:00.0: irq 17, io mem 0xfebfe000
xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
usb usb3: SerialNumber: 0000:04:00.0
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: setting latency timer to 64
r8169 0000:01:00.0: irq 49 for MSI/MSI-X
r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xffffc90000c7c000, 00:25:22:c4:81:75, XID 081000c0 IRQ 49
r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xf9dfa800
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:12.0: irq 16, io mem 0xf9dfe000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
usb usb5: SerialNumber: 0000:00:12.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:12.1: irq 16, io mem 0xf9dfd000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
usb usb6: SerialNumber: 0000:00:12.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:13.0: irq 18, io mem 0xf9dfc000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
usb usb7: SerialNumber: 0000:00:13.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 8
ohci_hcd 0000:00:13.1: irq 18, io mem 0xf9dfb000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI Host Controller
usb usb8: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
usb usb8: SerialNumber: 0000:00:13.1
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 9
ohci_hcd 0000:00:14.5: irq 18, io mem 0xf9df9000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI Host Controller
usb usb9: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
usb usb9: SerialNumber: 0000:00:14.5
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 50 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf9dff800 port 0xf9dff900 irq 50
ata2: SATA max UDMA/133 abar m1024@0xf9dff800 port 0xf9dff980 irq 50
ata3: SATA max UDMA/133 abar m1024@0xf9dff800 port 0xf9dffa00 irq 50
ata4: SATA max UDMA/133 abar m1024@0xf9dff800 port 0xf9dffa80 irq 50
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
ata4: SATA link down (SStatus 0 SControl 300)
Refined TSC clocksource calibration: 3192.950 MHz.
Switching to clocksource tsc
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: SONY DVD RW DRU-V200S, 1.60, max UDMA/100
ata3.00: configured for UDMA/100
ata2.00: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133
ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-8: KINGSTON SH103S390G, 501ABBF0, max UDMA/133
ata1.00: 175836528 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SH103S3 501A PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5
scsi 2:0:0:0: CD-ROM SONY DVD RW DRU-V200S 1.60 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 175836528 512-byte logical blocks: (90.0 GB/83.8 GiB)
sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 2:0:0:0: Attached scsi generic sg2 type 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
Btrfs loaded
device fsid 442dd1c9-2d90-43f2-a512-138646d06ec5 devid 1 transid 10 /dev/sdb1
PM: Starting manual resume from disk
PM: Hibernation image partition 8:2 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
udevd[372]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
wmi: Mapper loaded
ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xfec000f0 already in use
EDAC MC: Ver: 2.1.0
input: PC Speaker as /devices/platform/pcspkr/input/input2
powernow-k8: Found 1 AMD Phenom(tm) II X4 840 Processor (4 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (3200 MHz)
powernow-k8: 1 : pstate 1 (2500 MHz)
powernow-k8: 2 : pstate 2 (1900 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:03:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:03:00.0 to PCI:0000:02:00.0
nvidia 0000:02:00.0: enabling device (0000 -> 0003)
nvidia 0000:02:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.64 Tue Oct 30 10:58:20 PDT 2012
hda_intel: Disabling MSI
snd_hda_intel 0000:03:00.1: setting latency timer to 64
HDMI status: Codec=0 Pin=4 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=6 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input3
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input4
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input5
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input6
Adding 3933180k swap on /dev/sda2. Priority:-1 extents:1 across:3933180k SS
EXT4-fs (sda1): re-mounted. Opts: (null)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
loop: module loaded
usb 8-1: new full-speed USB device number 2 using ohci_hcd
usb 8-1: New USB device found, idVendor=046d, idProduct=c223
usb 8-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 8-1: Product: G15 Keyboard Hub
hub 8-1:1.0: USB hub found
hub 8-1:1.0: 4 ports detected
usb 8-1.1: new low-speed USB device number 3 using ohci_hcd
usb 8-1.1: New USB device found, idVendor=046d, idProduct=c226
usb 8-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 8-1.1: Product: G15 Gaming Keyboard
usb 8-1.3: new full-speed USB device number 4 using ohci_hcd
usb 8-1.3: New USB device found, idVendor=046d, idProduct=c245
usb 8-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1.3: Product: Gaming Mouse G400
usb 8-1.3: Manufacturer: Logitech
usb 8-1.4: new full-speed USB device number 5 using ohci_hcd
usb 8-1.4: New USB device found, idVendor=046d, idProduct=c227
usb 8-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 8-1.4: Product: G15 GamePanel LCD
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:13.1/usb8/8-1/8-1.1/8-1.1:1.0/input/input7
generic-usb 0003:046D:C226.0001: input,hidraw0: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:13.1-1.1/input0
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:13.1/usb8/8-1/8-1.1/8-1.1:1.1/input/input8
generic-usb 0003:046D:C226.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:13.1-1.1/input1
input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:13.1/usb8/8-1/8-1.3/8-1.3:1.0/input/input9
generic-usb 0003:046D:C245.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:00:13.1-1.3/input0
generic-usb 0003:046D:C245.0004: hiddev0,hidraw3: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:00:13.1-1.3/input1
input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:13.1/usb8/8-1/8-1.4/8-1.4:1.0/input/input10
generic-usb 0003:046D:C227.0005: input,hiddev0,hidraw4: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:13.1-1.4/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
r8169 0000:01:00.0: firmware: agent loaded rtl_nic/rtl8168d-1.fw into memory
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
r8169 0000:01:00.0: eth0: link down
r8169 0000:01:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
fuse init (API version 7.17)
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x400 offMax=0x1a98
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.18_Debian (interface 0x00190000).
vboxpci: IOMMU not found (not registered)
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
r8169 0000:01:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
usb 1-1: new high-speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=18d1, idProduct=4e41
usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-1: Product: Nexus 7
usb 1-1: Manufacturer: asus
usb 1-1: SerialNumber: 015d24a81563fe0e
usb 1-1: USB disconnect, device number 2
usb 1-1: new high-speed USB device number 3 using ehci_hcd
usb 1-1: New USB device found, idVendor=18d1, idProduct=4e41
usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-1: Product: Nexus 7
usb 1-1: Manufacturer: asus
usb 1-1: SerialNumber: 015d24a81563fe0e
usb 8-1: USB disconnect, device number 2
usb 8-1.1: USB disconnect, device number 3
usb 8-1.3: USB disconnect, device number 4
usb 8-1.4: USB disconnect, device number 5
usb 1-1: USB disconnect, device number 3
usb 1-1: new high-speed USB device number 4 using ehci_hcd
usb 1-1: New USB device found, idVendor=18d1, idProduct=4e41
usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-1: Product: Nexus 7
usb 1-1: Manufacturer: asus
usb 1-1: SerialNumber: 015d24a81563fe0e
usb 7-3: new full-speed USB device number 2 using ohci_hcd
usb 7-3: New USB device found, idVendor=046d, idProduct=c223
usb 7-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 7-3: Product: G15 Keyboard Hub
hub 7-3:1.0: USB hub found
hub 7-3:1.0: 4 ports detected
usb 7-3.1: new low-speed USB device number 3 using ohci_hcd
usb 7-3.1: New USB device found, idVendor=046d, idProduct=c226
usb 7-3.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 7-3.1: Product: G15 Gaming Keyboard
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:13.0/usb7/7-3/7-3.1/7-3.1:1.0/input/input11
generic-usb 0003:046D:C226.0006: input,hidraw0: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:13.0-3.1/input0
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:13.0/usb7/7-3/7-3.1/7-3.1:1.1/input/input12
generic-usb 0003:046D:C226.0007: input,hiddev0,hidraw1: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:13.0-3.1/input1
usb 7-3.3: new full-speed USB device number 4 using ohci_hcd
usb 7-3.3: New USB device found, idVendor=046d, idProduct=c245
usb 7-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-3.3: Product: Gaming Mouse G400
usb 7-3.3: Manufacturer: Logitech
input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:13.0/usb7/7-3/7-3.3/7-3.3:1.0/input/input13
generic-usb 0003:046D:C245.0008: input,hidraw2: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:00:13.0-3.3/input0
generic-usb 0003:046D:C245.0009: hiddev0,hidraw3: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:00:13.0-3.3/input1
usb 7-3.4: new full-speed USB device number 5 using ohci_hcd
usb 7-3.4: New USB device found, idVendor=046d, idProduct=c227
usb 7-3.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 7-3.4: Product: G15 GamePanel LCD
input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:13.0/usb7/7-3/7-3.4/7-3.4:1.0/input/input14
generic-usb 0003:046D:C227.000A: input,hiddev0,hidraw4: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:13.0-3.4/input0
usb 1-1: USB disconnect, device number 4
usb 1-1: new high-speed USB device number 5 using ehci_hcd
usb 1-1: New USB device found, idVendor=18d1, idProduct=4e41
usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-1: Product: Nexus 7
usb 1-1: Manufacturer: asus
usb 1-1: SerialNumber: 015d24a81563fe0e
usb 1-1: USB disconnect, device number 5
usb 1-1: new high-speed USB device number 6 using ehci_hcd
usb 1-1: New USB device found, idVendor=18d1, idProduct=4e41
usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-1: Product: Nexus 7
usb 1-1: Manufacturer: asus
usb 1-1: SerialNumber: 015d24a81563fe0e
usb 1-1: USB disconnect, device number 6