dmesg - btrfsRaid0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-10) ) #1 SMP Debian 3.5.5-1~experimental.1
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007ffcffff] usable
BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] ACPI data
BIOS-e820: [mem 0x000000007ffde000-0x000000007fffffff] ACPI NVS
BIOS-e820: [mem 0x00000000d0000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
DMI present.
DMI: MSI MS-7250/MS-7250, BIOS V3.10 04/07/2008
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x7ffd0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x7ffcffff]
[mem 0x00000000-0x7fdfffff] page 2M
[mem 0x7fe00000-0x7ffcffff] page 4k
kernel direct mapping tables up to 0x7ffcffff @ [mem 0x1fbfd000-0x1fffffff]
RAMDISK: [mem 0x3671a000-0x37384fff]
ACPI: RSDP 00000000000f98b0 00014 (v00 ACPIAM)
ACPI: RSDT 000000007ffd0000 0003C (v01 MSIISM OEMRSDT 04000807 MSFT 00000097)
ACPI: FACP 000000007ffd0200 00084 (v02 MSIISM OEMFACP 04000807 MSFT 00000097)
ACPI: DSDT 000000007ffd0440 05045 (v01 1ADGH 1ADGH013 00000013 INTL 20051117)
ACPI: FACS 000000007ffde000 00040
ACPI: APIC 000000007ffd0390 00070 (v01 MSIISM OEMAPIC 04000807 MSFT 00000097)
ACPI: MCFG 000000007ffd0400 0003C (v01 MSIISM OEMMCFG 04000807 MSFT 00000097)
ACPI: OEMB 000000007ffde040 00061 (v01 MSIISM AMI_OEM 04000807 MSFT 00000097)
ACPI: HPET 000000007ffd5490 00038 (v01 MSIISM OEMHPET0 04000807 MSFT 00000097)
ACPI: SSDT 000000007ffd54d0 001C4 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007ffcffff]
Initmem setup node 0 [mem 0x00000000-0x7ffcffff]
NODE_DATA [mem 0x7ffcc000-0x7ffcffff]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0x7ffcffff]
On node 0 totalpages: 524127
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3921 pages, LIFO batch:0
DMA32 zone: 7112 pages used for memmap
DMA32 zone: 513032 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x2008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
e820: [mem 0x80000000-0xcfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82560 r8192 d23936 u1048576
pcpu-alloc: s82560 r8192 d23936 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 516953
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Node 0: aperture @ 64fc000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 2046368k/2096960k available (3497k kernel code, 452k absent, 50140k reserved, 3203k data, 580k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:33024 nr_irqs:512 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2100.437 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.87 BogoMIPS (lpj=8401748)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
LVT offset 0 assigned for vector 0xf9
using AMD E400 aware idle routine
ACPI: Core revision 20120320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 Ok.
Brought up 2 CPUs
Total of 2 processors activated (8401.80 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7ffde000-0x7fffffff] (139264 bytes)
dummy:
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
node 0 link 0: io port [2000, 2fff]
TOM: 0000000080000000 aka 2048M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [80000000, fe0bffff]
bus: [00, ff] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x80000000-0xfcffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: >host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: >host bridge window [mem 0x80000000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0x80000000-0xfebfffff]
pci 0000:00:00.0: >[10de:0369] type 00 class 0x050000
pci 0000:00:01.0: >[10de:0360] type 00 class 0x060100
pci 0000:00:01.0: >reg 10: [io 0x2f00-0x2f7f]
pci 0000:00:01.1: >[10de:0368] type 00 class 0x0c0500
pci 0000:00:01.1: >reg 10: [io 0x2900-0x293f]
pci 0000:00:01.1: >reg 20: [io 0x2d00-0x2d3f]
pci 0000:00:01.1: >reg 24: [io 0x2e00-0x2e3f]
pci 0000:00:01.1: >PME# supported from D3hot D3cold
pci 0000:00:02.0: >[10de:036c] type 00 class 0x0c0310
pci 0000:00:02.0: >reg 10: [mem 0xfe9fb000-0xfe9fbfff]
pci 0000:00:02.0: >supports D1 D2
pci 0000:00:02.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: >[10de:036d] type 00 class 0x0c0320
pci 0000:00:02.1: >reg 10: [mem 0xfe9fac00-0xfe9facff]
pci 0000:00:02.1: >supports D1 D2
pci 0000:00:02.1: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: >[10de:036e] type 00 class 0x01018a
pci 0000:00:04.0: >reg 20: [io 0xffa0-0xffaf]
pci 0000:00:05.0: >[10de:037f] type 00 class 0x010185
pci 0000:00:05.0: >reg 10: [io 0xc480-0xc487]
pci 0000:00:05.0: >reg 14: [io 0xc400-0xc403]
pci 0000:00:05.0: >reg 18: [io 0xc080-0xc087]
pci 0000:00:05.0: >reg 1c: [io 0xc000-0xc003]
pci 0000:00:05.0: >reg 20: [io 0xbc00-0xbc0f]
pci 0000:00:05.0: >reg 24: [mem 0xfe9f9000-0xfe9f9fff]
pci 0000:00:05.1: >[10de:037f] type 00 class 0x010185
pci 0000:00:05.1: >reg 10: [io 0xb880-0xb887]
pci 0000:00:05.1: >reg 14: [io 0xb800-0xb803]
pci 0000:00:05.1: >reg 18: [io 0xb480-0xb487]
pci 0000:00:05.1: >reg 1c: [io 0xb400-0xb403]
pci 0000:00:05.1: >reg 20: [io 0xb080-0xb08f]
pci 0000:00:05.1: >reg 24: [mem 0xfe9f8000-0xfe9f8fff]
pci 0000:00:05.2: >[10de:037f] type 00 class 0x010185
pci 0000:00:05.2: >reg 10: [io 0xb000-0xb007]
pci 0000:00:05.2: >reg 14: [io 0xac00-0xac03]
pci 0000:00:05.2: >reg 18: [io 0xa880-0xa887]
pci 0000:00:05.2: >reg 1c: [io 0xa800-0xa803]
pci 0000:00:05.2: >reg 20: [io 0xa480-0xa48f]
pci 0000:00:05.2: >reg 24: [mem 0xfe9f7000-0xfe9f7fff]
pci 0000:00:06.0: >[10de:0370] type 01 class 0x060401
pci 0000:00:06.1: >[10de:0371] type 00 class 0x040300
pci 0000:00:06.1: >reg 10: [mem 0xfe9f0000-0xfe9f3fff]
pci 0000:00:06.1: >PME# supported from D3hot D3cold
pci 0000:00:08.0: >[10de:0373] type 00 class 0x068000
pci 0000:00:08.0: >reg 10: [mem 0xfe9f6000-0xfe9f6fff]
pci 0000:00:08.0: >reg 14: [io 0xa400-0xa407]
pci 0000:00:08.0: >reg 18: [mem 0xfe9fa800-0xfe9fa8ff]
pci 0000:00:08.0: >reg 1c: [mem 0xfe9fa400-0xfe9fa40f]
pci 0000:00:08.0: >supports D1 D2
pci 0000:00:08.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: >[10de:0373] type 00 class 0x068000
pci 0000:00:09.0: >reg 10: [mem 0xfe9f5000-0xfe9f5fff]
pci 0000:00:09.0: >reg 14: [io 0xa080-0xa087]
pci 0000:00:09.0: >reg 18: [mem 0xfe9fa000-0xfe9fa0ff]
pci 0000:00:09.0: >reg 1c: [mem 0xfe9f4c00-0xfe9f4c0f]
pci 0000:00:09.0: >supports D1 D2
pci 0000:00:09.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: >[10de:0376] type 01 class 0x060400
pci 0000:00:0a.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: >[10de:0374] type 01 class 0x060400
pci 0000:00:0b.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: >[10de:0374] type 01 class 0x060400
pci 0000:00:0c.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: >[10de:0378] type 01 class 0x060400
pci 0000:00:0d.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: >[10de:0375] type 01 class 0x060400
pci 0000:00:0e.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0f.0: >[10de:0377] type 01 class 0x060400
pci 0000:00:0f.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: >[1022:1100] type 00 class 0x060000
pci 0000:00:18.1: >[1022:1101] type 00 class 0x060000
pci 0000:00:18.2: >[1022:1102] type 00 class 0x060000
pci 0000:00:18.3: >[1022:1103] type 00 class 0x060000
pci 0000:00:06.0: >PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:06.0: > bridge window [mem 0xaff00000-0xafffffff pref]
pci 0000:00:06.0: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:06.0: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:06.0: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:06.0: > bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:06.0: > bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
pci 0000:02:00.0: >[1002:6739] type 00 class 0x030000
pci 0000:02:00.0: >reg 10: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:02:00.0: >reg 18: [mem 0xfeae0000-0xfeafffff 64bit]
pci 0000:02:00.0: >reg 20: [io 0xd000-0xd0ff]
pci 0000:02:00.0: >reg 30: [mem 0xfeac0000-0xfeadffff pref]
pci 0000:02:00.0: >supports D1 D2
pci 0000:02:00.1: >[1002:aa88] type 00 class 0x040300
pci 0000:02:00.1: >reg 10: [mem 0xfeabc000-0xfeabffff 64bit]
pci 0000:02:00.1: >supports D1 D2
pci 0000:00:0a.0: >PCI bridge to [bus 02-02]
pci 0000:00:0a.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: > bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:0a.0: > bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:0b.0: >PCI bridge to [bus 03-03]
pci 0000:00:0c.0: >PCI bridge to [bus 04-04]
pci 0000:00:0d.0: >PCI bridge to [bus 05-05]
pci 0000:00:0e.0: >PCI bridge to [bus 06-06]
pci 0000:07:00.0: >[1002:6719] type 00 class 0x030000
pci 0000:07:00.0: >reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:07:00.0: >reg 18: [mem 0xfebe0000-0xfebfffff 64bit]
pci 0000:07:00.0: >reg 20: [io 0xe000-0xe0ff]
pci 0000:07:00.0: >reg 30: [mem 0xfebc0000-0xfebdffff pref]
pci 0000:07:00.0: >supports D1 D2
pci 0000:07:00.1: >[1002:aa80] type 00 class 0x040300
pci 0000:07:00.1: >reg 10: [mem 0xfebbc000-0xfebbffff 64bit]
pci 0000:07:00.1: >supports D1 D2
pci 0000:00:0f.0: >PCI bridge to [bus 07-07]
pci 0000:00:0f.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:0f.0: > bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:0f.0: > bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LUB0] (IRQs 21 22 23) *7
ACPI: PCI Interrupt Link [LMAD] (IRQs 20) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 21 22 23) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 21 22 23) *5
ACPI: PCI Interrupt Link [LSA0] (IRQs 21 22 23) *11
ACPI: PCI Interrupt Link [LSA1] (IRQs 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA2] (IRQs 21 22 23) *10
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:00.0
vgaarb: bridge control possible 0000:02:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7ffd0000-0x7fffffff]
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000d0000-0x000dffff window]
pnp 00:00: >[mem 0x80000000-0xfebfffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: >[dma 4]
pnp 00:01: >[io 0x0000-0x000f]
pnp 00:01: >[io 0x0081-0x0083]
pnp 00:01: >[io 0x0087]
pnp 00:01: >[io 0x0089-0x008b]
pnp 00:01: >[io 0x008f]
pnp 00:01: >[io 0x00c0-0x00df]
pnp 00:01: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: >[io 0x0070-0x0071]
pnp 00:02: >[irq 8]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: >[io 0x0061]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: >[io 0x00f0-0x00ff]
pnp 00:04: >[irq 13]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: >[mem 0x000d0000-0x000d3fff window]
pnp 00:05: >[mem 0x000d4000-0x000d7fff window]
pnp 00:05: >[mem 0x000de000-0x000dffff window]
pnp 00:05: >[io 0x0010-0x001f]
pnp 00:05: >[io 0x0022-0x003f]
pnp 00:05: >[io 0x0044-0x005f]
pnp 00:05: >[io 0x0062-0x0063]
pnp 00:05: >[io 0x0065-0x006f]
pnp 00:05: >[io 0x0072-0x007f]
pnp 00:05: >[io 0x0080]
pnp 00:05: >[io 0x0084-0x0086]
pnp 00:05: >[io 0x0088]
pnp 00:05: >[io 0x008c-0x008e]
pnp 00:05: >[io 0x0090-0x009f]
pnp 00:05: >[io 0x00a2-0x00bf]
pnp 00:05: >[io 0x00e0-0x00ef]
pnp 00:05: >[io 0x04d0-0x04d1]
pnp 00:05: >[io 0x0800-0x080f]
pnp 00:05: >[io 0x2000-0x207f]
pnp 00:05: >[io 0x2080-0x20ff]
pnp 00:05: >[io 0x2400-0x247f]
pnp 00:05: >[io 0x2480-0x24ff]
pnp 00:05: >[io 0x2800-0x287f]
pnp 00:05: >[io 0x2880-0x28ff]
pnp 00:05: >[io 0x2c00-0x2c7f]
pnp 00:05: >[io 0x2c80-0x2cff]
pnp 00:05: >[mem 0xfe980000-0xfe9bffff]
pnp 00:05: >[mem 0xfee01000-0xfeefffff]
system 00:05: >[io 0x04d0-0x04d1] has been reserved
system 00:05: >[io 0x0800-0x080f] has been reserved
system 00:05: >[io 0x2000-0x207f] has been reserved
system 00:05: >[io 0x2080-0x20ff] has been reserved
system 00:05: >[io 0x2400-0x247f] has been reserved
system 00:05: >[io 0x2480-0x24ff] has been reserved
system 00:05: >[io 0x2800-0x287f] has been reserved
system 00:05: >[io 0x2880-0x28ff] has been reserved
system 00:05: >[io 0x2c00-0x2c7f] has been reserved
system 00:05: >[io 0x2c80-0x2cff] has been reserved
system 00:05: >[mem 0x000d0000-0x000d3fff window] has been reserved
system 00:05: >[mem 0x000d4000-0x000d7fff window] has been reserved
system 00:05: >[mem 0x000de000-0x000dffff window] has been reserved
system 00:05: >[mem 0xfe980000-0xfe9bffff] has been reserved
system 00:05: >[mem 0xfee01000-0xfeefffff] has been reserved
system 00:05: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: >[mem 0xfed00000-0xfed00fff]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:07: >[mem 0xfec00000-0xfec00fff]
pnp 00:07: >[mem 0xfee00000-0xfee00fff]
system 00:07: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: >[mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: >[io 0x0060]
pnp 00:08: >[io 0x0064]
pnp 00:08: >[irq 1]
pnp 00:08: >Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:09: >[irq 12]
pnp 00:09: >Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0a: >[io 0x0000-0xffffffffffffffff disabled]
pnp 00:0a: >[io 0x0a00-0x0a0f]
pnp 00:0a: >[io 0x0a10-0x0a1f]
system 00:0a: >[io 0x0a00-0x0a0f] has been reserved
system 00:0a: >[io 0x0a10-0x0a1f] has been reserved
system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: >[mem 0xe0000000-0xefffffff]
system 00:0b: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: >[mem 0xd0000000-0xdfffffff]
system 00:0c: >[mem 0xd0000000-0xdfffffff] has been reserved
system 00:0c: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: >[mem 0x00000000-0x0009ffff]
pnp 00:0d: >[mem 0x000c0000-0x000cffff]
pnp 00:0d: >[mem 0x000e0000-0x000fffff]
pnp 00:0d: >[mem 0x00100000-0x7fffffff]
pnp 00:0d: >[mem 0xfec00000-0xffffffff]
system 00:0d: >[mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: >[mem 0x000c0000-0x000cffff] could not be reserved
system 00:0d: >[mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: >[mem 0x00100000-0x7fffffff] could not be reserved
system 00:0d: >[mem 0xfec00000-0xffffffff] could not be reserved
system 00:0d: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:06.0: >PCI bridge to [bus 01-01]
pci 0000:00:06.0: > bridge window [mem 0xaff00000-0xafffffff pref]
pci 0000:00:0a.0: >PCI bridge to [bus 02-02]
pci 0000:00:0a.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: > bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:0a.0: > bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:0b.0: >PCI bridge to [bus 03-03]
pci 0000:00:0c.0: >PCI bridge to [bus 04-04]
pci 0000:00:0d.0: >PCI bridge to [bus 05-05]
pci 0000:00:0e.0: >PCI bridge to [bus 06-06]
pci 0000:00:0f.0: >PCI bridge to [bus 07-07]
pci 0000:00:0f.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:0f.0: > bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:0f.0: > bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:06.0: >setting latency timer to 64
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: >resource 8 [mem 0x80000000-0xfebfffff]
pci_bus 0000:01: >resource 2 [mem 0xaff00000-0xafffffff pref]
pci_bus 0000:01: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: >resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: >resource 8 [mem 0x80000000-0xfebfffff]
pci_bus 0000:02: >resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: >resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:02: >resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
pci_bus 0000:07: >resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: >resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:07: >resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
pci 0000:00:00.0: >Found enabled HT MSI Mapping
pci 0000:00:00.0: >Found enabled HT MSI Mapping
pci 0000:00:00.0: >Found enabled HT MSI Mapping
pci 0000:00:00.0: >Found enabled HT MSI Mapping
pci 0000:00:00.0: >Found enabled HT MSI Mapping
pci 0000:00:00.0: >Found enabled HT MSI Mapping
pci 0000:00:00.0: >Found enabled HT MSI Mapping
pci 0000:00:00.0: >Found enabled HT MSI Mapping
pci 0000:00:00.0: >Found enabled HT MSI Mapping
pci 0000:00:00.0: >Found enabled HT MSI Mapping
pci 0000:00:00.0: >Found enabled HT MSI Mapping
pci 0000:00:00.0: >Found enabled HT MSI Mapping
pci 0000:00:00.0: >Found enabled HT MSI Mapping
pci 0000:07:00.0: >Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 12716k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1357909467.644:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4021
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:0a.0: >irq 40 for MSI/MSI-X
pcieport 0000:00:0b.0: >irq 41 for MSI/MSI-X
pcieport 0000:00:0c.0: >irq 42 for MSI/MSI-X
pcieport 0000:00:0d.0: >irq 43 for MSI/MSI-X
pcieport 0000:00:0e.0: >irq 44 for MSI/MSI-X
pcieport 0000:00:0f.0: >irq 45 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
GHES: HEST is not enabled!
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: >RTC can wake from S4
rtc_cmos 00:02: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:02: >setting system clock to 2013-01-11 13:04:28 UTC (1357909468)
Freeing unused kernel memory: 580k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 588k freed
Freeing unused kernel memory: 640k freed
udevd[50]: starting version 175
SCSI subsystem initialized
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
forcedeth 0000:00:08.0: >setting latency timer to 64
libata version 3.00 loaded.
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
microcode: AMD CPU family 0xf not supported
forcedeth 0000:00:08.0: >ifname eth0, PHY OUI 0x1c1 @ 0, addr 00:16:17:8f:2a:de
forcedeth 0000:00:08.0: >highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 20
forcedeth 0000:00:09.0: >setting latency timer to 64
forcedeth 0000:00:09.0: >ifname eth1, PHY OUI 0x1c1 @ 1, addr 00:16:17:8f:2a:dd
forcedeth 0000:00:09.0: >highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
pata_amd 0000:00:04.0: >version 0.4.1
pata_amd 0000:00:04.0: >setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
sata_nv 0000:00:05.0: >version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
sata_nv 0000:00:05.0: >Using SWNCQ mode
sata_nv 0000:00:05.0: >Using MSI
sata_nv 0000:00:05.0: >setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xbc00 irq 21
ata4: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xbc08 irq 21
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
sata_nv 0000:00:05.1: >Using SWNCQ mode
sata_nv 0000:00:05.1: >Using MSI
sata_nv 0000:00:05.1: >setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb080 irq 23
ata6: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xb088 irq 23
ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 22
sata_nv 0000:00:05.2: >Using SWNCQ mode
sata_nv 0000:00:05.2: >Using MSI
sata_nv 0000:00:05.2: >setting latency timer to 64
scsi6 : sata_nv
scsi7 : sata_nv
ata7: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
ata8: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
ehci_hcd 0000:00:02.1: >setting latency timer to 64
ehci_hcd 0000:00:02.1: >EHCI Host Controller
ehci_hcd 0000:00:02.1: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: >debug port 1
ehci_hcd 0000:00:02.1: >cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: >irq 22, io mem 0xfe9fac00
ehci_hcd 0000:00:02.1: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5-trunk-amd64 ehci_hcd
usb usb1: >SerialNumber: 0000:00:02.1
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >10 ports detected
ata2: port disabled--ignoring
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: ATA-8: ST3000VX000-1CU166, CV22, max UDMA/133
ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata7.00: ATA-8: WDC WD5000BEVT-11A03T0, 01.01A01, max UDMA/133
ata7.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata7.00: configured for UDMA/133
scsi 2:0:0:0: >Direct-Access ATA ST3000VX000-1CU1 CV22 PQ: 0 ANSI: 5
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: ST3000VX000-1CU166, CV22, max UDMA/133
ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: >Direct-Access ATA ST3000VX000-1CU1 CV22 PQ: 0 ANSI: 5
scsi 4:0:0:0: >Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
sd 2:0:0:0: >[sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 2:0:0:0: >[sda] 4096-byte physical blocks
sd 2:0:0:0: >[sda] Write Protect is off
sd 2:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: >[sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 2:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: >[sdb] 4096-byte physical blocks
sd 3:0:0:0: >[sdb] Write Protect is off
sd 3:0:0:0: >[sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: >[sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: >[sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: >[sdc] Write Protect is off
sd 4:0:0:0: >[sdc] Mode Sense: 00 3a 00 10
sd 4:0:0:0: >[sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sda: sda1 sda2
sd 2:0:0:0: >[sda] Attached SCSI disk
sdb: sdb1 sdb2
sd 3:0:0:0: >[sdb] Attached SCSI disk
sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 >
sd 4:0:0:0: >[sdc] Attached SCSI disk
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: >Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
sd 5:0:0:0: >[sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: >[sdd] Write Protect is off
sd 5:0:0:0: >[sdd] Mode Sense: 00 3a 00 10
sd 5:0:0:0: >[sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
sdd: sdd1 sdd2 < sdd5 sdd6 sdd7 sdd8 >
sd 5:0:0:0: >[sdd] Attached SCSI disk
scsi 6:0:0:0: >Direct-Access ATA WDC WD5000BEVT-1 01.0 PQ: 0 ANSI: 5
sd 6:0:0:0: >[sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 6:0:0:0: >[sde] Write Protect is off
sd 6:0:0:0: >[sde] Mode Sense: 00 3a 00 10
sd 6:0:0:0: >[sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
sde: sde1
sd 6:0:0:0: >[sde] Attached SCSI disk
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8.00: ATAPI: TSSTcorpCD/DVDW SH-S183A, SB02, max UDMA/33
ata8.00: applying bridge limits
ata8.00: configured for UDMA/33
scsi 7:0:0:0: >CD-ROM TSSTcorp CD/DVDW SH-S183A SB02 PQ: 0 ANSI: 5
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.0: >setting latency timer to 64
ohci_hcd 0000:00:02.0: >OHCI Host Controller
ohci_hcd 0000:00:02.0: >new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: >irq 23, io mem 0xfe9fb000
sd 2:0:0:0: >Attached scsi generic sg0 type 0
sd 3:0:0:0: >Attached scsi generic sg1 type 0
sd 4:0:0:0: >Attached scsi generic sg2 type 0
sd 5:0:0:0: >Attached scsi generic sg3 type 0
sd 6:0:0:0: >Attached scsi generic sg4 type 0
scsi 7:0:0:0: >Attached scsi generic sg5 type 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 7:0:0:0: >Attached scsi CD-ROM sr0
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: OHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5-trunk-amd64 ohci_hcd
usb usb2: >SerialNumber: 0000:00:02.0
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >10 ports detected
microcode: AMD CPU family 0xf not supported
md: md126 stopped.
md: bind
md: bind
md: raid1 personality registered for level 1
bio: create slab at 1
md/raid1:md126: active with 2 out of 2 mirrors
md126: detected capacity change from 0 to 4293459968
md126: unknown partition table
md: md100 stopped.
md: bind
md: bind
md: raid10 personality registered for level 10
md/raid10:md100: active with 2 out of 2 devices
md100: detected capacity change from 0 to 2139095040
md100: unknown partition table
usb 2-2: >new full-speed USB device number 2 using ohci_hcd
md: md6 stopped.
md: bind
md: bind
md: raid0 personality registered for level 0
md/raid0:md6: md_size is 209707008 sectors.
md: RAID0 configuration for md6 - 1 zone
md: zone0=[sdd6/sdc6]
zone-offset= 0KB, device-offset= 0KB, size= 104853504KB
md6: detected capacity change from 0 to 107369988096
md6: p1
md: md7 stopped.
md: bind
md: bind
md/raid10:md7: active with 2 out of 2 devices
md7: detected capacity change from 0 to 429496729600
usb 2-2: >New USB device found, idVendor=1131, idProduct=1001
usb 2-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: >Product: ISSCEDRBTA
usb 2-2: >Manufacturer: ISSC
md7: p1 < p5 p6 p7 p8 >
usb 2-3: >new low-speed USB device number 3 using ohci_hcd
md: md8 stopped.
md: bind
md: bind
md/raid0:md8: md_size is 1994432512 sectors.
md: RAID0 configuration for md8 - 1 zone
md: zone0=[sdd8/sdc8]
zone-offset= 0KB, device-offset= 0KB, size= 997216256KB
md8: detected capacity change from 0 to 1021149446144
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
usb 2-3: >New USB device found, idVendor=0a81, idProduct=0101
usb 2-3: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: >Product: USB Keyboard
usb 2-3: >Manufacturer: CHESEN
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input0
md8: p1 < p5 p6 >
hid-generic 0003:0A81:0101.0001: >input,hidraw0: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:02.0-3/input0
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input1
hid-generic 0003:0A81:0101.0002: >input,hidraw1: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:02.0-3/input1
usb 2-6: >new low-speed USB device number 4 using ohci_hcd
usb 2-6: >New USB device found, idVendor=093a, idProduct=2510
usb 2-6: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-6: >Product: USB Optical Mouse
usb 2-6: >Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input2
hid-generic 0003:093A:2510.0003: >input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:02.0-6/input0
Btrfs loaded
PM: Starting manual resume from disk
PM: Hibernation image partition 9:100 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (md126): mounted filesystem with ordered data mode. Opts: (null)
udevd[434]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
i2c i2c-0: >nForce2 SMBus adapter at 0x2d00
i2c i2c-1: >nForce2 SMBus adapter at 0x2e00
nv_tco: NV TCO WatchDog Timer Driver v0.01
nv_tco: Watchdog reboot not detected
nv_tco: initialized (0x2440). heartbeat=30 sec (nowayout=0)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
EDAC MC: Ver: 2.1.0
k8temp 0000:00:18.3: >Temperature readouts might be wrong - check erratum #141
input: PC Speaker as /devices/platform/pcspkr/input/input5
MCE: In-kernel MCE decoding enabled.
microcode: AMD CPU family 0xf not supported
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 1885 MBytes.
[fglrx] vendor: 1002 device: 6739 count: 1
[fglrx] vendor: 1002 device: 6719 count: 2
[fglrx] ioport: bar 4, base 0xd000, size: 0x100
pci 0000:02:00.0: >enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 19
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 18
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.98.2 [Jul 27 2012] with 2 minors
kvm: Nested Virtualization enabled
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
snd_hda_intel 0000:00:06.1: >irq 46 for MSI/MSI-X
snd_hda_intel 0000:00:06.1: >setting latency timer to 64
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2 cpu cores) (version 2.20.00)
powernow-k8: fid 0xc (2000 MHz), vid 0xa
powernow-k8: fid 0xa (1800 MHz), vid 0xc
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
input: HDA NVidia Line as /devices/pci0000:00/0000:00:06.1/sound/card0/input6
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:06.1/sound/card0/input7
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:06.1/sound/card0/input8
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:06.1/sound/card0/input9
input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:06.1/sound/card0/input10
input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:06.1/sound/card0/input11
input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:06.1/sound/card0/input12
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17
hda-intel: 0000:02:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:02:00.1: >irq 47 for MSI/MSI-X
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0a.0/0000:02:00.1/sound/card1/input13
hda-intel: 0000:07:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:07:00.1: >irq 48 for MSI/MSI-X
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0f.0/0000:07:00.1/sound/card2/input14
Adding 2088956k swap on /dev/md100. Priority:-1 extents:1 across:2088956k
EXT4-fs (md126): re-mounted. Opts: (null)
EXT4-fs (md126): re-mounted. Opts: errors=remount-ro
loop: module loaded
w83627ehf: Found W83627EHG chip at 0xa10
fuse init (API version 7.19)
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
XFS (md7p6): Mounting Filesystem
XFS (md7p6): Ending clean mount
EXT4-fs (md7p5): mounted filesystem with ordered data mode. Opts: user_xattr
EXT4-fs (md7p7): mounted filesystem with ordered data mode. Opts: user_xattr
XFS (md8p6): Mounting Filesystem
XFS (md8p6): Ending clean mount
EXT4-fs (md8p5): mounted filesystem with ordered data mode. Opts: user_xattr,acl
XFS (md7p8): Mounting Filesystem
XFS (md7p8): Ending clean mount
Bridge firewalling registered
device eth0 entered promiscuous mode
forcedeth 0000:00:08.0: >irq 49 for MSI/MSI-X
forcedeth 0000:00:08.0: >eth0: MSI enabled
device eth1 entered promiscuous mode
forcedeth 0000:00:09.0: >irq 50 for MSI/MSI-X
forcedeth 0000:00:09.0: >eth1: MSI enabled
br0: port 2(eth1) entered listening state
br0: port 2(eth1) entered listening state
br0: port 1(eth0) entered listening state
br0: port 1(eth0) entered listening state
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
br0: port 2(eth1) entered learning state
br0: port 1(eth0) entered learning state
br0: topology change detected, propagating
br0: port 2(eth1) entered forwarding state
br0: topology change detected, propagating
br0: port 1(eth0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
hostapd[2456]: segfault at 0 ip 000000000044388d sp 00007ffff7bdbe00 error 4 in hostapd[400000+d1000]
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
usb 2-2: >reset full-speed USB device number 2 using ohci_hcd
btusb 2-2:1.0: >no reset_resume for driver btusb?
btusb 2-2:1.1: >no reset_resume for driver btusb?
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
fglrx_pci 0000:07:00.0: >irq 51 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 3974
[fglrx] Firegl kernel thread PID: 3975
[fglrx] Firegl kernel thread PID: 3976
[fglrx] IRQ 51 Enabled
fglrx_pci 0000:02:00.0: >irq 52 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 4067
[fglrx] Firegl kernel thread PID: 4068
[fglrx] Firegl kernel thread PID: 4069
[fglrx] IRQ 52 Enabled
[fglrx] Gart USWC size:628 M.
[fglrx] Gart cacheable size:247 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fb07000, size:1f9000
[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[fglrx] Gart USWC size:628 M.
[fglrx] Gart cacheable size:247 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fe07000, size:1f9000
[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
postgres (4212): /proc/4212/oom_adj is deprecated, please use /proc/4212/oom_score_adj instead.
[fglrx] IRQ 51 Disabled
[fglrx] IRQ 52 Disabled
fglrx_pci 0000:07:00.0: >irq 51 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 5373
[fglrx] Firegl kernel thread PID: 5374
[fglrx] Firegl kernel thread PID: 5375
[fglrx] IRQ 51 Enabled
fglrx_pci 0000:02:00.0: >irq 52 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 5388
[fglrx] Firegl kernel thread PID: 5389
[fglrx] Firegl kernel thread PID: 5390
[fglrx] IRQ 52 Enabled
[fglrx] Gart USWC size:628 M.
[fglrx] Gart cacheable size:247 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fb07000, size:1f9000
[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[fglrx] Gart USWC size:628 M.
[fglrx] Gart cacheable size:247 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fe07000, size:1f9000
[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
md: bind
md: bind
md/raid1:md1: not clean -- starting background reconstruction
md/raid1:md1: active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 8585674752
md1: unknown partition table
md: resync of RAID array md1
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
md: using 128k window, over a total of 8384448k.
md: md1: resync done.
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:sda1
disk 1, wo:0, o:1, dev:sdb1
md: bind
md: bind
md/raid10:md2: not clean -- starting background reconstruction
md/raid10:md2: active with 2 out of 2 devices
md2: detected capacity change from 0 to 4286578688
md2: unknown partition table
md: md2 switched to read-write mode.
md: resync of RAID array md2
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
md: using 128k window, over a total of 4186112k.
md: md2: resync done.
RAID10 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:sda2
disk 1, wo:0, o:1, dev:sdb2
device label fast devid 1 transid 3 /dev/sda3
device label fast devid 2 transid 3 /dev/sdb3
device label fast devid 1 transid 4 /dev/sda3
btrfs: disk space caching is enabled
btrfs: no dev_stats entry found for device /dev/sdb3 (devid 2) (OK on first mount after mkfs)
btrfs: no dev_stats entry found for device /dev/sda3 (devid 1) (OK on first mount after mkfs)
device label fast devid 1 transid 7 /dev/sda3
btrfs: use lzo compression
btrfs: disk space caching is enabled
btrfs: bdev /dev/sdb3 errs: wr 0, rd 0, flush 0, corrupt 0, gen 0
btrfs: bdev /dev/sda3 errs: wr 0, rd 0, flush 0, corrupt 0, gen 0
btrfs: block rsv returned -28
------------[ cut here ]------------
WARNING: at /home/blank/debian/kernel/release/linux/linux-3.5.5/fs/btrfs/extent-tree.c:6221 btrfs_alloc_free_block+0xd7/0x29a [btrfs]()
Hardware name: MS-7250
Modules linked in: cpufreq_powersave cpufreq_stats cpufreq_userspace cpufreq_conservative parport_pc ppdev lp parport bnep rfcomm binfmt_misc uinput nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc bridge stp llc xfs fuse w83627ehf hwmon_vid loop snd_hda_codec_hdmi snd_hda_codec_realtek powernow_k8 mperf snd_hda_intel snd_hda_codec snd_hwdep snd_pcm kvm_amd snd_page_alloc snd_seq kvm snd_seq_device psmouse fglrx(PO) snd_timer edac_mce_amd snd pcspkr serio_raw k8temp soundcore edac_core btusb bluetooth evdev rfkill nv_tco i2c_nforce2 i2c_core processor button thermal_sys ext4 crc16 jbd2 mbcache btrfs crc32c libcrc32c zlib_deflate hid_generic usbhid hid dm_mod raid0 raid10 raid1 md_mod sr_mod cdrom sg ohci_hcd sd_mod crc_t10dif ata_generic ehci_hcd sata_nv pata_amd forcedeth libata usbcore scsi_mod usb_common [last unloaded: scsi_wait_scan]
Pid: 15479, comm: rm Tainted: P O 3.5-trunk-amd64 #1 Debian 3.5.5-1~experimental.1
Call Trace:
[] ? warn_slowpath_common+0x78/0x8c
[] ? btrfs_alloc_free_block+0xd7/0x29a [btrfs]
[] ? tree_insert+0x166/0x17c [btrfs]
[] ? __btrfs_cow_block+0x107/0x352 [btrfs]
[] ? btrfs_token_item_size+0x6b/0xb6 [btrfs]
[] ? btrfs_cow_block+0xf7/0x143 [btrfs]
[] ? push_leaf_left+0xd5/0x166 [btrfs]
[] ? btrfs_token_item_offset+0x6b/0xb6 [btrfs]
[] ? btrfs_del_items+0x233/0x2f9 [btrfs]
[] ? btrfs_token_item_size+0x6b/0xb6 [btrfs]
[] ? btrfs_del_csums+0x16b/0x272 [btrfs]
[] ? __btrfs_free_extent+0x555/0x5bd [btrfs]
[] ? run_clustered_refs+0x6df/0x77d [btrfs]
[] ? find_ref_head+0x8b/0xb5 [btrfs]
[] ? btrfs_run_delayed_refs+0x20a/0x302 [btrfs]
[] ? __btrfs_end_transaction+0xa2/0x209 [btrfs]
[] ? btrfs_evict_inode+0x1b0/0x261 [btrfs]
[] ? evict+0x9f/0x152
[] ? do_unlinkat+0x107/0x156
[] ? page_fault+0x25/0x30
[] ? system_call_fastpath+0x16/0x1b
---[ end trace e9f50814149b8473 ]---
btrfs: block rsv returned -28
------------[ cut here ]------------
WARNING: at /home/blank/debian/kernel/release/linux/linux-3.5.5/fs/btrfs/extent-tree.c:6221 btrfs_alloc_free_block+0xd7/0x29a [btrfs]()
Hardware name: MS-7250
Modules linked in: cpufreq_powersave cpufreq_stats cpufreq_userspace cpufreq_conservative parport_pc ppdev lp parport bnep rfcomm binfmt_misc uinput nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc bridge stp llc xfs fuse w83627ehf hwmon_vid loop snd_hda_codec_hdmi snd_hda_codec_realtek powernow_k8 mperf snd_hda_intel snd_hda_codec snd_hwdep snd_pcm kvm_amd snd_page_alloc snd_seq kvm snd_seq_device psmouse fglrx(PO) snd_timer edac_mce_amd snd pcspkr serio_raw k8temp soundcore edac_core btusb bluetooth evdev rfkill nv_tco i2c_nforce2 i2c_core processor button thermal_sys ext4 crc16 jbd2 mbcache btrfs crc32c libcrc32c zlib_deflate hid_generic usbhid hid dm_mod raid0 raid10 raid1 md_mod sr_mod cdrom sg ohci_hcd sd_mod crc_t10dif ata_generic ehci_hcd sata_nv pata_amd forcedeth libata usbcore scsi_mod usb_common [last unloaded: scsi_wait_scan]
Pid: 15479, comm: rm Tainted: P W O 3.5-trunk-amd64 #1 Debian 3.5.5-1~experimental.1
Call Trace:
[] ? warn_slowpath_common+0x78/0x8c
[] ? btrfs_alloc_free_block+0xd7/0x29a [btrfs]
[] ? kmem_cache_free+0x2d/0x69
[] ? tree_insert_offset+0xb3/0xb7 [btrfs]
[] ? __btrfs_cow_block+0x107/0x352 [btrfs]
[] ? btrfs_buffer_uptodate+0x40/0x56 [btrfs]
[] ? btrfs_cow_block+0xf7/0x143 [btrfs]
[] ? btrfs_search_slot+0x22e/0x659 [btrfs]
[] ? btrfs_del_csums+0xcd/0x272 [btrfs]
[] ? __btrfs_free_extent+0x555/0x5bd [btrfs]
[] ? run_clustered_refs+0x6df/0x77d [btrfs]
[] ? find_ref_head+0x8b/0xb5 [btrfs]
[] ? btrfs_run_delayed_refs+0x20a/0x302 [btrfs]
[] ? __btrfs_end_transaction+0xa2/0x209 [btrfs]
[] ? btrfs_evict_inode+0x1b0/0x261 [btrfs]
[] ? evict+0x9f/0x152
[] ? do_unlinkat+0x107/0x156
[] ? page_fault+0x25/0x30
[] ? system_call_fastpath+0x16/0x1b
---[ end trace e9f50814149b8474 ]---
device label fast devid 1 transid 15 /dev/sda3
btrfs: disk space caching is enabled
btrfs: bdev /dev/sdb3 errs: wr 0, rd 0, flush 0, corrupt 0, gen 0
btrfs: bdev /dev/sda3 errs: wr 0, rd 0, flush 0, corrupt 0, gen 0
use_block_rsv: 181 callbacks suppressed
btrfs: block rsv returned -28
------------[ cut here ]------------
WARNING: at /home/blank/debian/kernel/release/linux/linux-3.5.5/fs/btrfs/extent-tree.c:6221 btrfs_alloc_free_block+0xd7/0x29a [btrfs]()
Hardware name: MS-7250
Modules linked in: cpufreq_powersave cpufreq_stats cpufreq_userspace cpufreq_conservative parport_pc ppdev lp parport bnep rfcomm binfmt_misc uinput nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc bridge stp llc xfs fuse w83627ehf hwmon_vid loop snd_hda_codec_hdmi snd_hda_codec_realtek powernow_k8 mperf snd_hda_intel snd_hda_codec snd_hwdep snd_pcm kvm_amd snd_page_alloc snd_seq kvm snd_seq_device psmouse fglrx(PO) snd_timer edac_mce_amd snd pcspkr serio_raw k8temp soundcore edac_core btusb bluetooth evdev rfkill nv_tco i2c_nforce2 i2c_core processor button thermal_sys ext4 crc16 jbd2 mbcache btrfs crc32c libcrc32c zlib_deflate hid_generic usbhid hid dm_mod raid0 raid10 raid1 md_mod sr_mod cdrom sg ohci_hcd sd_mod crc_t10dif ata_generic ehci_hcd sata_nv pata_amd forcedeth libata usbcore scsi_mod usb_common [last unloaded: scsi_wait_scan]
Pid: 15749, comm: dd Tainted: P W O 3.5-trunk-amd64 #1 Debian 3.5.5-1~experimental.1
Call Trace:
[] ? warn_slowpath_common+0x78/0x8c
[] ? btrfs_alloc_free_block+0xd7/0x29a [btrfs]
[] ? kmem_cache_free+0x2d/0x69
[] ? tree_insert_offset+0xb3/0xb7 [btrfs]
[] ? __btrfs_cow_block+0x107/0x352 [btrfs]
[] ? btrfs_buffer_uptodate+0x40/0x56 [btrfs]
[] ? btrfs_cow_block+0xf7/0x143 [btrfs]
[] ? btrfs_search_slot+0x22e/0x659 [btrfs]
[] ? btrfs_del_csums+0xcd/0x272 [btrfs]
[] ? __btrfs_free_extent+0x555/0x5bd [btrfs]
[] ? run_clustered_refs+0x6df/0x77d [btrfs]
[] ? find_ref_head+0x8b/0xb5 [btrfs]
[] ? btrfs_run_delayed_refs+0x20a/0x302 [btrfs]
[] ? mutex_lock+0xd/0x2d
[] ? block_rsv_release_bytes+0xd4/0xe9 [btrfs]
[] ? __btrfs_end_transaction+0x78/0x209 [btrfs]
[] ? btrfs_truncate+0x4d6/0x518 [btrfs]
[] ? unmap_mapping_range+0x148/0x153
[] ? btrfs_setattr+0xfd/0x164 [btrfs]
[] ? notify_change+0x1c4/0x28c
[] ? should_resched+0x5/0x23
[] ? do_truncate+0x68/0x86
[] ? do_last+0x642/0x717
[] ? path_openat+0xcb/0x351
[] ? do_filp_open+0x2a/0x6e
[] ? alloc_fd+0x64/0xee
[] ? do_sys_open+0x5f/0xe6
[] ? system_call_fastpath+0x16/0x1b
---[ end trace e9f50814149b8475 ]---
btrfs: block rsv returned -28
------------[ cut here ]------------
WARNING: at /home/blank/debian/kernel/release/linux/linux-3.5.5/fs/btrfs/extent-tree.c:6221 btrfs_alloc_free_block+0xd7/0x29a [btrfs]()
Hardware name: MS-7250
Modules linked in: cpufreq_powersave cpufreq_stats cpufreq_userspace cpufreq_conservative parport_pc ppdev lp parport bnep rfcomm binfmt_misc uinput nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc bridge stp llc xfs fuse w83627ehf hwmon_vid loop snd_hda_codec_hdmi snd_hda_codec_realtek powernow_k8 mperf snd_hda_intel snd_hda_codec snd_hwdep snd_pcm kvm_amd snd_page_alloc snd_seq kvm snd_seq_device psmouse fglrx(PO) snd_timer edac_mce_amd snd pcspkr serio_raw k8temp soundcore edac_core btusb bluetooth evdev rfkill nv_tco i2c_nforce2 i2c_core processor button thermal_sys ext4 crc16 jbd2 mbcache btrfs crc32c libcrc32c zlib_deflate hid_generic usbhid hid dm_mod raid0 raid10 raid1 md_mod sr_mod cdrom sg ohci_hcd sd_mod crc_t10dif ata_generic ehci_hcd sata_nv pata_amd forcedeth libata usbcore scsi_mod usb_common [last unloaded: scsi_wait_scan]
Pid: 15749, comm: dd Tainted: P W O 3.5-trunk-amd64 #1 Debian 3.5.5-1~experimental.1
Call Trace:
[] ? warn_slowpath_common+0x78/0x8c
[] ? btrfs_alloc_free_block+0xd7/0x29a [btrfs]
[] ? kmem_cache_free+0x2d/0x69
[] ? tree_insert_offset+0xb3/0xb7 [btrfs]
[] ? __btrfs_cow_block+0x107/0x352 [btrfs]
[] ? btrfs_buffer_uptodate+0x40/0x56 [btrfs]
[] ? btrfs_cow_block+0xf7/0x143 [btrfs]
[] ? btrfs_search_slot+0x22e/0x659 [btrfs]
[] ? btrfs_del_csums+0xcd/0x272 [btrfs]
[] ? __btrfs_free_extent+0x555/0x5bd [btrfs]
[] ? run_clustered_refs+0x6df/0x77d [btrfs]
[] ? find_ref_head+0x8b/0xb5 [btrfs]
[] ? btrfs_run_delayed_refs+0x20a/0x302 [btrfs]
[] ? mutex_lock+0xd/0x2d
[] ? block_rsv_release_bytes+0xd4/0xe9 [btrfs]
[] ? __btrfs_end_transaction+0x78/0x209 [btrfs]
[] ? btrfs_truncate+0x4d6/0x518 [btrfs]
[] ? unmap_mapping_range+0x148/0x153
[] ? btrfs_setattr+0xfd/0x164 [btrfs]
[] ? notify_change+0x1c4/0x28c
[] ? should_resched+0x5/0x23
[] ? do_truncate+0x68/0x86
[] ? do_last+0x642/0x717
[] ? path_openat+0xcb/0x351
[] ? do_filp_open+0x2a/0x6e
[] ? alloc_fd+0x64/0xee
[] ? do_sys_open+0x5f/0xe6
[] ? system_call_fastpath+0x16/0x1b
---[ end trace e9f50814149b8476 ]---