dmesg - bsp.03
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.35-rt52 (root@wam037) (gcc version 4.7.2 (Debian 4.7.2-4) ) #1 SMP PREEMPT RT Fri Dec 28 12:03:29 IST 2012
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
BIOS-e820: 0000000040200000 - 000000007ad6f000 (usable)
BIOS-e820: 000000007ad6f000 - 000000007adbf000 (ACPI NVS)
BIOS-e820: 000000007adbf000 - 000000007adc8000 (ACPI data)
BIOS-e820: 000000007adc8000 - 000000007adf2000 (reserved)
BIOS-e820: 000000007adf2000 - 000000007adf3000 (usable)
BIOS-e820: 000000007adf3000 - 000000007ae03000 (reserved)
BIOS-e820: 000000007ae03000 - 000000007ae10000 (ACPI NVS)
BIOS-e820: 000000007ae10000 - 000000007ae38000 (reserved)
BIOS-e820: 000000007ae38000 - 000000007ae7b000 (ACPI NVS)
BIOS-e820: 000000007ae7b000 - 000000007b000000 (usable)
BIOS-e820: 000000007b800000 - 000000007fa00000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000047fe00000 (usable)
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z68 Extreme4, BIOS P1.40 05/18/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x47fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask F80000000 write-back
2 base 07B800000 mask FFF800000 uncachable
3 base 07C000000 mask FFC000000 uncachable
4 base 080000000 mask F80000000 uncachable
5 base 47FE00000 mask FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 000000007b800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7b000 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fd230] fd230
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000099000] 99000 size 20480
init_memory_mapping: 0000000000000000-000000007b000000
0000000000 - 007b000000 page 2M
kernel direct mapping tables up to 7b000000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-000000047fe00000
0100000000 - 047fe00000 page 2M
kernel direct mapping tables up to 47fe00000 @ 7aff1000-7b000000
RAMDISK: 36acc000 - 3755e000
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 000000007adbf068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 000000007adc7150 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 000000007adbf150 07FFB (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 000000007ae07f80 00040
ACPI: APIC 000000007adc7248 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 000000007adc72e0 001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 000000007adc74b8 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: AAFT 000000007adc74f8 000D3 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 000000007adc75d0 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000047fe00000
Initmem setup node 0 0000000000000000-000000047fe00000
NODE_DATA [000000047fdfb000 - 000000047fdfffff]
[ffffea0000000000-ffffea000fbfffff] PMD -> [ffff88046f400000-ffff88047d3fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0047fe00
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x00020000
0: 0x00020200 -> 0x00040000
0: 0x00040200 -> 0x0007ad6f
0: 0x0007adf2 -> 0x0007adf3
0: 0x0007ae7b -> 0x0007b000
0: 0x00100000 -> 0x0047fe00
On node 0 totalpages: 4171907
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3921 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 484141 pages, LIFO batch:31
Normal zone: 50169 pages used for memmap
Normal zone: 3619335 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040000000 - 0000000040200000
PM: Registered nosave memory: 000000007ad6f000 - 000000007adbf000
PM: Registered nosave memory: 000000007adbf000 - 000000007adc8000
PM: Registered nosave memory: 000000007adc8000 - 000000007adf2000
PM: Registered nosave memory: 000000007adf3000 - 000000007ae03000
PM: Registered nosave memory: 000000007ae03000 - 000000007ae10000
PM: Registered nosave memory: 000000007ae10000 - 000000007ae38000
PM: Registered nosave memory: 000000007ae38000 - 000000007ae7b000
PM: Registered nosave memory: 000000007b000000 - 000000007b800000
PM: Registered nosave memory: 000000007b800000 - 000000007fa00000
PM: Registered nosave memory: 000000007fa00000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at 7fa00000 (gap: 7fa00000:7f31c000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88047fa00000 s76096 r8192 d22208 u262144
pcpu-alloc: s76096 r8192 d22208 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4107397
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16371384k/18872320k available (3614k kernel code, 2184692k absent, 316244k reserved, 3157k data, 584k init)
Preemptible hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:744 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 536870912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3391.689 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6783.37 BogoMIPS (lpj=3391689)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#3
smpboot cpu 3: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#4
smpboot cpu 4: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#5
smpboot cpu 5: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#6
smpboot cpu 6: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#7 Ok.
smpboot cpu 7: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (54269.38 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 7ad6f000 (327680 bytes)
PM: Registering ACPI NVS region at 7ae03000 (53248 bytes)
PM: Registering ACPI NVS region at 7ae38000 (274432 bytes)
print_constraints: dummy:
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000007ae0f898 006F4 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 006F4 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: SSDT 000000007ae06d98 000E4 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000E4 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x7fa00000-0xffffffff]
pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: [8086:0122] type 0 class 0x000380
pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xfbf07000-0xfbf0700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xfbf06000-0xfbf063ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfbf00000-0xfbf03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xfbf05000-0xfbf053ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.0: [8086:1c44] type 0 class 0x000601
pci 0000:00:1f.2: [8086:1c00] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io 0xf110-0xf117]
pci 0000:00:1f.2: reg 14: [io 0xf100-0xf103]
pci 0000:00:1f.2: reg 18: [io 0xf0f0-0xf0f7]
pci 0000:00:1f.2: reg 1c: [io 0xf0e0-0xf0e3]
pci 0000:00:1f.2: reg 20: [io 0xf0d0-0xf0df]
pci 0000:00:1f.2: reg 24: [io 0xf0c0-0xf0cf]
pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfbf04000-0xfbf040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
pci 0000:00:1f.5: [8086:1c08] type 0 class 0x000101
pci 0000:00:1f.5: reg 10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.5: reg 14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.5: reg 18: [io 0xf090-0xf097]
pci 0000:00:1f.5: reg 1c: [io 0xf080-0xf083]
pci 0000:00:1f.5: reg 20: [io 0xf070-0xf07f]
pci 0000:00:1f.5: reg 24: [io 0xf060-0xf06f]
pci 0000:01:00.0: [1002:68bf] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfbe20000-0xfbe3ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfbe00000-0xfbe1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa58] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xfbe40000-0xfbe43fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: [1b4b:91a0] type 0 class 0x000101
pci 0000:03:00.0: reg 10: [io 0xd040-0xd047]
pci 0000:03:00.0: reg 14: [io 0xd030-0xd033]
pci 0000:03:00.0: reg 18: [io 0xd020-0xd027]
pci 0000:03:00.0: reg 1c: [io 0xd010-0xd013]
pci 0000:03:00.0: reg 20: [io 0xd000-0xd00f]
pci 0000:03:00.0: reg 24: [mem 0xfbd10000-0xfbd107ff]
pci 0000:03:00.0: reg 30: [mem 0xfbd00000-0xfbd0ffff pref]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:04:00.0: [1b6f:7023] type 0 class 0x000c03
pci 0000:04:00.0: reg 10: [mem 0xfbc00000-0xfbc07fff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:05:00.0: [1b6f:7023] type 0 class 0x000c03
pci 0000:05:00.0: reg 10: [mem 0xfbb00000-0xfbb07fff 64bit]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:06:00.0: [10b5:8608] type 1 class 0x000604
pci 0000:06:00.0: reg 10: [mem 0xfba00000-0xfba1ffff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.7: PCI bridge to [bus 06-0f]
pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.7: bridge window [mem 0xfb800000-0xfbafffff]
pci 0000:00:1c.7: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:07:01.0: [10b5:8608] type 1 class 0x000604
pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
pci 0000:07:01.0: PME# disabled
pci 0000:07:04.0: [10b5:8608] type 1 class 0x000604
pci 0000:07:04.0: PME# supported from D0 D3hot D3cold
pci 0000:07:04.0: PME# disabled
pci 0000:07:05.0: [10b5:8608] type 1 class 0x000604
pci 0000:07:05.0: PME# supported from D0 D3hot D3cold
pci 0000:07:05.0: PME# disabled
pci 0000:07:06.0: [10b5:8608] type 1 class 0x000604
pci 0000:07:06.0: PME# supported from D0 D3hot D3cold
pci 0000:07:06.0: PME# disabled
pci 0000:07:07.0: [10b5:8608] type 1 class 0x000604
pci 0000:07:07.0: PME# supported from D0 D3hot D3cold
pci 0000:07:07.0: PME# disabled
pci 0000:07:08.0: [10b5:8608] type 1 class 0x000604
pci 0000:07:08.0: PME# supported from D0 D3hot D3cold
pci 0000:07:08.0: PME# disabled
pci 0000:07:09.0: [10b5:8608] type 1 class 0x000604
pci 0000:07:09.0: PME# supported from D0 D3hot D3cold
pci 0000:07:09.0: PME# disabled
pci 0000:06:00.0: PCI bridge to [bus 07-0f]
pci 0000:06:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:06:00.0: bridge window [mem 0xfb800000-0xfb9fffff]
pci 0000:06:00.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:07:01.0: PCI bridge to [bus 08-08]
pci 0000:09:00.0: [1b21:1080] type 1 class 0x000604
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:07:04.0: PCI bridge to [bus 09-0a]
pci 0000:09:00.0: PCI bridge to [bus 0a-0a]
pci 0000:0b:00.0: [1106:3403] type 0 class 0x000c00
pci 0000:0b:00.0: reg 10: [mem 0xfb900000-0xfb9007ff 64bit]
pci 0000:0b:00.0: reg 18: [io 0xc000-0xc0ff]
pci 0000:0b:00.0: supports D2
pci 0000:0b:00.0: PME# supported from D2 D3hot D3cold
pci 0000:0b:00.0: PME# disabled
pci 0000:07:05.0: PCI bridge to [bus 0b-0b]
pci 0000:07:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:07:05.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:0c:00.0: [14e4:16b1] type 0 class 0x000200
pci 0000:0c:00.0: reg 10: [mem 0xd0010000-0xd001ffff 64bit pref]
pci 0000:0c:00.0: reg 18: [mem 0xd0000000-0xd000ffff 64bit pref]
pci 0000:0c:00.0: reg 30: [mem 0xfb800000-0xfb8007ff pref]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:07:06.0: PCI bridge to [bus 0c-0c]
pci 0000:07:06.0: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:07:06.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:07:07.0: PCI bridge to [bus 0d-0d]
pci 0000:07:08.0: PCI bridge to [bus 0e-0e]
pci 0000:07:09.0: PCI bridge to [bus 0f-0f]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR31._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR34._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR34.BR22._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR35._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR36._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR37._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR38._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR39._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1c) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009ec00 - 000000000009ffff
reserve RAM buffer: 000000007ad6f000 - 000000007bffffff
reserve RAM buffer: 000000007adf3000 - 000000007bffffff
reserve RAM buffer: 000000007b000000 - 000000007bffffff
reserve RAM buffer: 000000047fe00000 - 000000047fffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x03af window]
pnp 00:00: [io 0x03e0-0x0cf7 window]
pnp 00:00: [io 0x03b0-0x03df window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0x7fa00000-0xffffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed10000-0xfed19fff]
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [mem 0xfed90000-0xfed93fff]
pnp 00:01: [mem 0xfed20000-0xfed3ffff]
pnp 00:01: [mem 0xfee00000-0xfee0ffff]
system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io 0x0290-0x029f]
pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x03f0-0x03f5]
pnp 00:03: [io 0x03f7]
pnp 00:03: [irq 6]
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:04: [dma 4]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0081-0x0083]
pnp 00:04: [io 0x0087]
pnp 00:04: [io 0x0089-0x008b]
pnp 00:04: [io 0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0070-0x0071]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x005f]
pnp 00:07: [io 0x0062-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x0072-0x007f]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x00f0-0x00ff]
pnp 00:08: [irq 13]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: [irq 4]
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io 0x0400-0x0453]
pnp 00:0a: [io 0x0458-0x047f]
pnp 00:0a: [io 0x1180-0x119f]
pnp 00:0a: [io 0x0500-0x057f]
pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0a: [mem 0xfec00000-0xfecfffff]
pnp 00:0a: [mem 0xfed08000-0xfed08fff]
pnp 00:0a: [mem 0xff000000-0xffffffff]
system 00:0a: [io 0x0400-0x0453] has been reserved
system 00:0a: [io 0x0458-0x047f] has been reserved
system 00:0a: [io 0x1180-0x119f] has been reserved
system 00:0a: [io 0x0500-0x057f] has been reserved
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0b: [io 0x0454-0x0457]
system 00:0b: [io 0x0454-0x0457] has been reserved
system 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0c: [mem 0xfed00000-0xfed003ff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 4 pci_try_num: 5
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:07:01.0: PCI bridge to [bus 08-08]
pci 0000:09:00.0: PCI bridge to [bus 0a-0a]
pci 0000:07:04.0: PCI bridge to [bus 09-0a]
pci 0000:07:05.0: PCI bridge to [bus 0b-0b]
pci 0000:07:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:07:05.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:07:06.0: PCI bridge to [bus 0c-0c]
pci 0000:07:06.0: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:07:06.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:07:07.0: PCI bridge to [bus 0d-0d]
pci 0000:07:08.0: PCI bridge to [bus 0e-0e]
pci 0000:07:09.0: PCI bridge to [bus 0f-0f]
pci 0000:06:00.0: PCI bridge to [bus 07-0f]
pci 0000:06:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:06:00.0: bridge window [mem 0xfb800000-0xfb9fffff]
pci 0000:06:00.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 06-0f]
pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.7: bridge window [mem 0xfb800000-0xfbafffff]
pci 0000:00:1c.7: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:06:00.0: setting latency timer to 64
pci 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:07:01.0: setting latency timer to 64
pci 0000:07:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:07:04.0: setting latency timer to 64
pci 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:09:00.0: setting latency timer to 64
pci 0000:07:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:07:05.0: setting latency timer to 64
pci 0000:07:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:07:06.0: setting latency timer to 64
pci 0000:07:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:07:07.0: setting latency timer to 64
pci 0000:07:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:07:08.0: setting latency timer to 64
pci 0000:07:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:07:09.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x7fa00000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xfb800000-0xfbafffff]
pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xfb800000-0xfb9fffff]
pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:0b: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:0b: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:0c: resource 1 [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:0c: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 8192 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:01:00.0: Boot video device
pci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:04:00.0: PCI INT A disabled
pci 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:05:00.0: PCI INT A disabled
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 10824k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880076d6f000 - ffff88007ad6f000
software IO TLB at phys 0x76d6f000 - 0x7ad6f000
audit: initializing netlink socket (disabled)
type=2000 audit(1357385760.086:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31996
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
pcieport 0000:00:1c.6: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
pcieport 0000:00:1c.7: irq 45 for MSI/MSI-X
pcieport 0000:06:00.0: setting latency timer to 64
pcieport 0000:06:00.0: irq 46 for MSI/MSI-X
pcieport 0000:07:01.0: setting latency timer to 64
pcieport 0000:07:01.0: irq 47 for MSI/MSI-X
pcieport 0000:07:04.0: setting latency timer to 64
pcieport 0000:07:04.0: irq 48 for MSI/MSI-X
pcieport 0000:07:05.0: setting latency timer to 64
pcieport 0000:07:05.0: irq 49 for MSI/MSI-X
pcieport 0000:07:06.0: setting latency timer to 64
pcieport 0000:07:06.0: irq 50 for MSI/MSI-X
pcieport 0000:07:07.0: setting latency timer to 64
pcieport 0000:07:07.0: irq 51 for MSI/MSI-X
pcieport 0000:07:08.0: setting latency timer to 64
pcieport 0000:07:08.0: irq 52 for MSI/MSI-X
pcieport 0000:07:09.0: setting latency timer to 64
pcieport 0000:07:09.0: irq 53 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pcieport 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:01.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:04.0: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:05.0: Signaling PME through PCIe PME interrupt
pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:06.0: Signaling PME through PCIe PME interrupt
pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:07.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:08.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:09.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2013-01-05 11:36:01 UTC (1357385761)
Initializing network drop monitor service
Freeing unused kernel memory: 584k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 464k freed
Freeing unused kernel memory: 164k freed
udevd[91]: starting version 175
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbf06000
input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio1/input/input0
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.35-rt52 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
xhci_hcd 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:04:00.0: setting latency timer to 64
xhci_hcd 0000:04:00.0: xHCI Host Controller
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI subsystem initialized
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
xhci_hcd 0000:04:00.0: irq 17, io mem 0xfbc00000
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1d.0: debug port 2
xhci_hcd 0000:04:00.0: irq 54 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.35-rt52 xhci_hcd
usb usb2: SerialNumber: 0000:04:00.0
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbf05000
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
libata version 3.00 loaded.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_marvell 0000:03:00.0: setting latency timer to 64
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.35-rt52 xhci_hcd
usb usb4: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.35-rt52 ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
xhci_hcd 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
xhci_hcd 0000:05:00.0: setting latency timer to 64
xhci_hcd 0000:05:00.0: xHCI Host Controller
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
scsi0 : pata_marvell
FDC 0 is a post-1991 82077
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:05:00.0: irq 18, io mem 0xfbb00000
xhci_hcd 0000:05:00.0: irq 55 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.2.35-rt52 xhci_hcd
usb usb5: SerialNumber: 0000:05:00.0
scsi1 : pata_marvell
ata1: PATA max UDMA/100 cmd 0xd040 ctl 0xd030 bmdma 0xd000 irq 16
ata2: PATA max UDMA/133 cmd 0xd020 ctl 0xd010 bmdma 0xd008 irq 16
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.2.35-rt52 xhci_hcd
usb usb6: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0d0 irq 14
ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf0d8 irq 15
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
ata6: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
ata4.00: ATAPI: ASUS DRW-20B1LT, 1.00, max UDMA/100
ata4.01: ATA-8: WDC WD5000AAVS-00ZTB0, 01.01B01, max UDMA/133
ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/100
ata4.01: configured for UDMA/133
scsi 3:0:0:0: CD-ROM ASUS DRW-20B1LT 1.00 PQ: 0 ANSI: 5
scsi 3:0:1:0: Direct-Access ATA WDC WD5000AAVS-0 01.0 PQ: 0 ANSI: 5
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new low-speed USB device number 2 using xhci_hcd
tg3.c:v3.121 (November 2, 2011)
tg3 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:0c:00.0: setting latency timer to 64
firewire_ohci 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
firewire_ohci 0000:0b:00.0: setting latency timer to 64
tg3 0000:0c:00.0: eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address 00:25:22:ce:60:75
tg3 0000:0c:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:0c:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:0c:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sd 3:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:1:0: [sda] Write Protect is off
sd 3:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr 3:0:0:0: Attached scsi CD-ROM sr0
usb 2-1: New USB device found, idVendor=046d, idProduct=c31d
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Keyboard
usb 2-1: Manufacturer: Logitech
usb 2-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 2-1: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
firewire_ohci: Added fw-ohci device 0000:0b:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
sda: sda1 sda2 < sda5 sda6 > sda3
sd 3:0:1:0: [sda] Attached SCSI disk
sr 3:0:0:0: Attached scsi generic sg0 type 5
sd 3:0:1:0: Attached scsi generic sg1 type 0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1c.5/0000:04:00.0/usb2/2-1/2-1:1.0/input/input1
generic-usb 0003:046D:C31D.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:04:00.0-1/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1c.5/0000:04:00.0/usb2/2-1/2-1:1.1/input/input2
generic-usb 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:04:00.0-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 3-1: new high-speed USB device number 2 using ehci_hcd
usb 3-1: New USB device found, idVendor=8087, idProduct=0024
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
Refined TSC clocksource calibration: 3392.294 MHz.
Switching to clocksource tsc
usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
usb 1-1.3: New USB device found, idVendor=08bb, idProduct=2900
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: USB Audio CODEC
usb 1-1.3: Manufacturer: Burr-Brown from TI
input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.3/input/input3
generic-usb 0003:08BB:2900.0003: input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:1a.0-1.3/input3
usb 1-1.4: new high-speed USB device number 4 using ehci_hcd
firewire_core: created device fw0: GUID 008f130011450e00, S400
usb 1-1.4: string descriptor 0 malformed (err = -61), defaulting to 0x0409
usb 1-1.4: New USB device found, idVendor=17cc, idProduct=0815
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 1-1.4: Product: Audio Kontrol 1
usb 1-1.4: Manufacturer: Native Instruments
usb 1-1.4: SerialNumber: SN-2FS7AMVOKG
PM: Starting manual resume from disk
PM: Hibernation image partition 8:6 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda5): INFO: recovery required on readonly filesystem
EXT4-fs (sda5): write access will be enabled during recovery
usb 3-1.2: new low-speed USB device number 3 using ehci_hcd
usb 3-1.2: New USB device found, idVendor=046d, idProduct=c408
usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.2: Product: USB Trackball
usb 3-1.2: Manufacturer: Logitech
input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input4
generic-usb 0003:046D:C408.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1d.0-1.2/input0
EXT4-fs (sda5): orphan cleanup on readonly fs
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 262182
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 265726
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 265730
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 265712
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 265734
EXT4-fs (sda5): 5 orphan inodes deleted
EXT4-fs (sda5): recovery complete
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
udevd[414]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: PC Speaker as /devices/platform/pcspkr/input/input7
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: enabling device (0006 -> 0007)
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:01:00.0: setting latency timer to 64
mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combining
[drm] MTRR allocation failed. Graphics performance may suffer.
i915 0000:00:02.0: irq 56 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
Console: switching to colour frame buffer device 128x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
No ACPI video bus found
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[drm] initializing kernel modesetting (JUNIPER 0x1002:0x68BF 0x1458:0x220E).
[drm] register mmio base: 0xFBE20000
[drm] register mmio size: 131072
ATOM BIOS: GV
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 8191710 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 57 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading JUNIPER Microcode
input: Audio Kontrol 1 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/input/input8
usbcore: registered new interface driver snd-usb-caiaq
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A
[drm] HPD5
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DVI-D
[drm] HPD1
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] DVI-I
[drm] HPD6
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 3:
[drm] VGA
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
usbcore: registered new interface driver snd-usb-audio
[drm] fb mappable at 0xC0142000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb1) is primary device
fbcon: Remapping primary device, fb1, to tty 1-63
fb1: radeondrmfb frame buffer device
[drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 1
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
loop: module loaded
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: Creating 8 devices ...
Adding 2047924k swap on /dev/zram0. Priority:100 extents:1 across:2047924k SS
Adding 2047924k swap on /dev/zram1. Priority:100 extents:1 across:2047924k SS
Adding 2047924k swap on /dev/zram2. Priority:100 extents:1 across:2047924k SS
Adding 2047924k swap on /dev/zram3. Priority:100 extents:1 across:2047924k SS
Adding 2047924k swap on /dev/zram4. Priority:100 extents:1 across:2047924k SS
Adding 2047924k swap on /dev/zram5. Priority:100 extents:1 across:2047924k SS
Adding 2047924k swap on /dev/zram6. Priority:100 extents:1 across:2047924k SS
Adding 2047924k swap on /dev/zram7. Priority:100 extents:1 across:2047924k SS
tg3 0000:0c:00.0: irq 58 for MSI/MSI-X
tg3 0000:0c:00.0: irq 59 for MSI/MSI-X
tg3 0000:0c:00.0: irq 60 for MSI/MSI-X
tg3 0000:0c:00.0: irq 61 for MSI/MSI-X
tg3 0000:0c:00.0: irq 62 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:0c:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:0c:00.0: eth0: Flow control is on for TX and on for RX
tg3 0000:0c:00.0: eth0: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08