dmesg - 1500mhz
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Linux version 3.6.2 (root@linaro-ubuntu-desktop) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #2 SMP PREEMPT Wed Dec 26 06:32:59 UTC 2012
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: ODROID-X
[ 0.000000] cma: CMA: reserved 16 MiB at 6e800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] CPU EXYNOS4412 (id 0xe4412211)
[ 0.000000] exynos4_init_clocks: initializing clocks
[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[ 0.000000] s3c_register_clksrc: clock armclk has no registers set
[ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
[ 0.000000] audiocdclk: no parent clock specified
[ 0.000000] exynos4_setup_clocks: registering clocks
[ 0.000000] exynos4_setup_clocks: xtal is 24000000
[ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000
[ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=160000000
[ 0.000000] ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
[ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 50000000
[ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 50000000
[ 0.000000] On node 0 totalpages: 257792
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 188944 pages, LIFO batch:31
[ 0.000000] HighMem zone: 526 pages used for memmap
[ 0.000000] HighMem zone: 66802 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c0d7a000 s7744 r8192 d12736 u32768
[ 0.000000] pcpu-alloc: s7744 r8192 d12736 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255746
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 48MB 216MB 743MB = 1007MB total
[ 0.000000] Memory: 988864k/1005248k available, 42304k reserved, 269312K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc04b9504 (4806 kB)
[ 0.000000] .init : 0xc04ba000 - 0xc04e2e40 ( 164 kB)
[ 0.000000] .data : 0xc04e4000 - 0xc05350c0 ( 325 kB)
[ 0.000000] .bss : 0xc05350e4 - 0xc056dea0 ( 228 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:549
[ 0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 4294967291ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.045000] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
[ 0.045000] pid_max: default: 32768 minimum: 301
[ 0.045000] Mount-cache hash table entries: 512
[ 0.045000] CPU: Testing write buffer coherency: ok
[ 0.045000] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
[ 0.045000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.045000] Setting up static identity map for 0x4037ac50 - 0x4037aca8
[ 0.045000] L310 cache controller enabled
[ 0.045000] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
[ 0.070000] CPU1: Booted secondary processor
[ 0.090000] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
[ 0.090000] CPU1: Unknown IPI message 0x1
[ 0.100000] CPU2: Booted secondary processor
[ 0.120000] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
[ 0.120000] CPU2: Unknown IPI message 0x1
[ 0.130000] CPU3: Booted secondary processor
[ 0.150000] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
[ 0.150000] CPU3: Unknown IPI message 0x1
[ 0.150000] Brought up 4 CPUs
[ 0.150000] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
[ 0.150000] devtmpfs: initialized
[ 0.155000] dummy:
[ 0.155000] NET: Registered protocol family 16
[ 0.160000] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.165000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.165000] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.165000] S3C Power Management, Copyright 2004 Simtec Electronics
[ 0.170000] EXYNOS4x12 PMU Initialize
[ 0.170000] EXYNOS: Initializing architecture
[ 0.170000] s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
[ 0.180000] bio: create slab at 0
[ 0.180000] hdmi_5v: 5000 mV
[ 0.180000] usbcore: registered new interface driver usbfs
[ 0.180000] usbcore: registered new interface driver hub
[ 0.180000] usbcore: registered new device driver usb
[ 0.180000] s3c-i2c s3c2440-i2c.0: slave address 0x10
[ 0.180000] s3c-i2c s3c2440-i2c.0: bus frequency set to 390 KHz
[ 0.180000] max77686 0-0009: device found
[ 0.180000] max77686 0-0009: irq is not specified
[ 0.180000] VDD_ALIVE_1.0V: 1000 mV
[ 0.185000] VDDQ_M1M2_1.8V: 1800 mV
[ 0.185000] VDDQ_M0_1.8V: 1800 mV
[ 0.185000] VDDQ_MMC2_2.8V: 2800 mV
[ 0.185000] VDDQ_MMC13_1V8: 1800 mV
[ 0.185000] VDD_MPLL_1.0V: 1000 mV
[ 0.190000] VDD_VPLL_1.0V: 1000 mV
[ 0.190000] VDD10_HDMI_1.0V: 1000 mV
[ 0.190000] VDD_VTCORE_1.0V: 1000 mV
[ 0.190000] VDDQ_MIPIHSI_1.8V: 1800 mV
[ 0.190000] VDD18_ABB1_1.8V: 1800 mV
[ 0.195000] VDD33_UOTG_3.3V: 3300 mV
[ 0.195000] VDDQ_C2C_1.8V: 1800 mV
[ 0.195000] VDD18_ABB2_1.8V: 1800 mV
[ 0.195000] VDD10_HSIC_1.0V: 1000 mV
[ 0.195000] VDD18_HSIC_1.8V: 1800 mV
[ 0.200000] VDDQ_CAM_1.8V: 1800 mV
[ 0.200000] VDD_LDO18_1.8V: 1800 mV
[ 0.200000] VDD_VTCAM_1.8V: 1800 mV
[ 0.200000] VDD_LDO20_1V8: 1800 mV
[ 0.200000] VDD_SDCARD_3.3V: 3300 mV
[ 0.200000] VDD_LDO22_2.8V: 2800 mV
[ 0.205000] VDD_TOUCH_2.8V: 2800 mV
[ 0.205000] VDD_TOUCHLED_3.3V: 3300 mV
[ 0.205000] VDDQ_LCD_1.8V: 1800 mV
[ 0.205000] VDD_MOTOR_3.0V: 3000 mV
[ 0.205000] VDD_MIF_1.0V: 800 1050 mV at 1000 mV
[ 0.205000] VDD_ARM_1.3V: 800 1400 mV at 1100 mV
[ 0.210000] VDD_INT_1.0V: 800 1150 mV at 1000 mV
[ 0.210000] VDD_G3D_1.0V: 850 1200 mV at 1000 mV
[ 0.210000] VDDQ_CKEM1M2_1.2V: 1200 mV
[ 0.210000] VDD_INL_1.35V: 1350 mV
[ 0.210000] VDD_INL_2.0V: 2000 mV
[ 0.210000] VDD_BUCK8_2.8V: 2800 mV
[ 0.215000] VDD_BUCK9_1.2V: 1200 mV
[ 0.215000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[ 0.215000] s3c-i2c s3c2440-i2c.1: slave address 0x10
[ 0.215000] s3c-i2c s3c2440-i2c.1: bus frequency set to 390 KHz
[ 0.215000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[ 0.215000] s3c-i2c s3c2440-i2c.3: slave address 0x10
[ 0.215000] s3c-i2c s3c2440-i2c.3: bus frequency set to 390 KHz
[ 0.215000] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
[ 0.215000] s3c-i2c s3c2440-i2c.7: slave address 0x10
[ 0.215000] s3c-i2c s3c2440-i2c.7: bus frequency set to 390 KHz
[ 0.215000] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
[ 0.215000] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
[ 0.215000] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 390 KHz
[ 0.215000] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
[ 0.215000] Linux video capture interface: v2.00
[ 0.215000] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.215000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.215000] Switching to clocksource mct-frc
[ 0.225000] NET: Registered protocol family 2
[ 0.225000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.225000] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[ 0.225000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.225000] TCP: reno registered
[ 0.225000] UDP hash table entries: 512 (order: 2, 24576 bytes)
[ 0.225000] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[ 0.225000] NET: Registered protocol family 1
[ 0.230000] Trying to unpack rootfs image as initramfs...
[ 0.860000] Freeing initrd memory: 11120K
[ 0.865000] bounce pool size: 64 pages
[ 0.875000] msgmni has been set to 1459
[ 0.875000] io scheduler noop registered
[ 0.875000] io scheduler deadline registered
[ 0.875000] io scheduler cfq registered (default)
[ 0.875000] start plist test
[ 0.880000] end plist test
[ 0.880000] s3c-fb exynos4-fb.0: start latency exceeded, new value 708 ns
[ 0.880000] s3c-fb exynos4-fb.0: state restore latency exceeded, new value 34750 ns
[ 0.900000] Console: switching to colour frame buffer device 170x48
[ 0.910000] s3c-fb exynos4-fb.0: window 0: fb
[ 0.915000] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
[ 0.915000] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.920000] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
[ 0.920000] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.920000] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
[ 0.920000] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[ 0.995000] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
[ 0.995000] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
[ 1.895000] console [ttySAC1] enabled
[ 1.900000] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
[ 1.905000] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
[ 1.920000] brd: module loaded
[ 1.930000] loop: module loaded
[ 1.930000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.935000] s5p-ehci s5p-ehci: S5P EHCI Host Controller
[ 1.940000] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[ 1.945000] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
[ 1.960000] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
[ 1.960000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.965000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.975000] usb usb1: Product: S5P EHCI Host Controller
[ 1.980000] usb usb1: Manufacturer: Linux 3.6.2 ehci_hcd
[ 1.985000] usb usb1: SerialNumber: s5p-ehci
[ 1.990000] hub 1-0:1.0: USB hub found
[ 1.990000] hub 1-0:1.0: 3 ports detected
[ 1.995000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.005000] exynos-ohci exynos-ohci: Already power on PHY
[ 2.010000] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
[ 2.015000] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
[ 2.020000] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
[ 2.085000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.090000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.100000] usb usb2: Product: EXYNOS OHCI Host Controller
[ 2.105000] usb usb2: Manufacturer: Linux 3.6.2 ohci_hcd
[ 2.110000] usb usb2: SerialNumber: exynos-ohci
[ 2.115000] hub 2-0:1.0: USB hub found
[ 2.115000] hub 2-0:1.0: 3 ports detected
[ 2.120000] usb3503: USB HUB driver init
[ 2.125000] usb3503: usb3503_probe:380
[ 2.130000] usb3503: usb3503_set_mode: mode = 1
[ 2.240000] usb3503: usb3503_register_write: reg: e7 data: 3 write failed
[ 2.240000] usb3503: reg_write: write E7, req:03, val:b8
[ 2.245000] usb3503: SP_ILOCK write fail err = -6
[ 2.250000] usb3503: usb3503_probe: probed on hub mode
[ 2.255000] i2c-core: driver [usb3503] using legacy suspend method
[ 2.265000] i2c-core: driver [usb3503] using legacy resume method
[ 2.270000] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 2.275000] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[ 2.280000] vivi-000: V4L2 device registered as video0
[ 2.285000] Video Technology Magazine Virtual Video Capture Board ver 0.8.1 successfully loaded.
[ 2.300000] s5p-hdmiphy 8-0038: probe successful
[ 2.310000] s5p-hdmi exynos4-hdmi: probe successful
[ 2.315000] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
[ 2.325000] s5p-mixer s5p-mixer: probe start
[ 2.330000] s5p-mixer s5p-mixer: resources acquired
[ 2.330000] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
[ 2.340000] s5p-mixer s5p-mixer: module s5p-sdo is missing
[ 2.345000] s5p-mixer s5p-mixer: registered layer graph0 as /dev/video1
[ 2.355000] fb1: registered frame buffer emulation for /dev/video1
[ 2.360000] s5p-mixer s5p-mixer: registered layer graph1 as /dev/video2
[ 2.365000] fb2: registered frame buffer emulation for /dev/video2
[ 2.370000] s5p-mixer s5p-mixer: registered layer video0 as /dev/video3
[ 2.380000] fb3: registered frame buffer emulation for /dev/video3
[ 2.385000] s5p-mixer s5p-mixer: probe successful
[ 2.390000] cpuidle: using governor ladder
[ 2.395000] sdhci: Secure Digital Host Controller Interface driver
[ 2.400000] sdhci: Copyright(c) Pierre Ossman
[ 2.405000] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (50000000 Hz)
[ 2.410000] mmc0: no vmmc regulator found
[ 2.415000] Registered led device: mmc0::
[ 2.445000] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
[ 2.450000] usbcore: registered new interface driver usbhid
[ 2.455000] usbhid: USB HID core driver
[ 2.455000] HKDK TMU: Platform Device Init
[ 2.460000] HKDK TMU: Platform Driver Init
[ 2.465000] HKDK TMU: Loaded
[ 2.470000] HKDK TMU: Pdev
[ 2.470000] HKDK TMU: MAX CPU Frequency: 1600000
[ 2.470000] HKDK TMU: Set TMU Status
[ 2.480000] usb 1-2: new high-speed USB device number 2 using s5p-ehci
[ 2.480000] HKDK TMU: Got IRQ
[ 2.490000] HKDK TMU: Request IRQ
[ 2.495000] HKDK TMU: Request IO Memory
[ 2.495000] mmc0: new high speed SDHC card at address e624
[ 2.495000] mmcblk0: mmc0:e624 SU16G 14.8 GiB
[ 2.495000] mmcblk0: p1 p2 p3
[ 2.510000] HKDK TMU: Remap IO Memory
[ 2.510000] HKDK TMU: Compensation Parameter is: 1039774
[ 2.515000] HKDK TMU: CPU Registers Initialization CompleteHKDK TMU: Rising Threshold: 82786e
[ 2.520000] HKDK TMU: Initialized
[ 2.530000] HKDK TMU: Created Queue
[ 2.530000] HKDK TMU: INIT Queue
[ 2.535000] HKDK TMU: Delay Work created on the queue
[ 2.550000] max98090 1-0010: revision 0x42
[ 2.555000] [MAX98090] max98090_set_record_main_mic(150)
[ 2.560000] hkdk-snd-max89090 hkdk-snd-max89090: max98090-aif1 samsung-i2s.0 mapping ok
[ 2.570000] hkdk-snd-max89090 hkdk-snd-max89090: max98090-aif1 samsung-i2s.0 mapping ok
[ 2.575000] TCP: cubic registered
[ 2.580000] NET: Registered protocol family 17
[ 2.585000] NET: Registered protocol family 15
[ 2.590000] NET: Registered protocol family 35
[ 2.595000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 2.600000] Registering SWP/SWPB emulation handler
[ 2.605000] VDD_G3D_1.0V: incomplete constraints, leaving on
[ 2.610000] VDDQ_LCD_1.8V: incomplete constraints, leaving on
[ 2.615000] s3c-rtc s3c64xx-rtc: setting system clock to 2013-01-03 20:04:56 UTC (1357243496)
[ 2.625000] usb 1-2: New USB device found, idVendor=0424, idProduct=3503
[ 2.625000] ALSA device list:
[ 2.625000] #0: hkdk-max98090
[ 2.635000] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.635000] Freeing init memory: 160K
[ 2.650000] hub 1-2:1.0: USB hub found
[ 2.650000] hub 1-2:1.0: 3 ports detected
[ 2.690000] udevd[1222]: starting version 175
[ 2.880000] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.940000] usb 1-2.1: new high-speed USB device number 3 using s5p-ehci
[ 3.050000] usb 1-2.1: New USB device found, idVendor=0424, idProduct=9514
[ 3.055000] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.060000] hub 1-2.1:1.0: USB hub found
[ 3.065000] hub 1-2.1:1.0: 5 ports detected
[ 3.355000] usb 1-2.1.1: new high-speed USB device number 4 using s5p-ehci
[ 3.460000] usb 1-2.1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 3.460000] usb 1-2.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.470000] init: ureadahead main process (1354) terminated with status 5
[ 3.565000] usb 1-2.1.4: new low-speed USB device number 5 using s5p-ehci
[ 3.670000] usb 1-2.1.4: New USB device found, idVendor=046d, idProduct=c05a
[ 3.675000] usb 1-2.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.680000] usb 1-2.1.4: Product: USB Optical Mouse
[ 3.685000] usb 1-2.1.4: Manufacturer: Logitech
[ 3.695000] input: Logitech USB Optical Mouse as /devices/platform/s5p-ehci/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.0/input/input0
[ 3.705000] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-s5p-ehci-2.1.4/input0
[ 3.800000] usb 1-2.1.5: new low-speed USB device number 6 using s5p-ehci
[ 3.910000] usb 1-2.1.5: New USB device found, idVendor=0461, idProduct=0010
[ 3.910000] usb 1-2.1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.915000] usb 1-2.1.5: Product: USB Keyboard
[ 3.925000] usb 1-2.1.5: Manufacturer: NOVATEK
[ 3.930000] input: NOVATEK USB Keyboard as /devices/platform/s5p-ehci/usb1/1-2/1-2.1/1-2.1.5/1-2.1.5:1.0/input/input1
[ 3.945000] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-s5p-ehci-2.1.5/input0
[ 3.960000] input: NOVATEK USB Keyboard as /devices/platform/s5p-ehci/usb1/1-2/1-2.1/1-2.1.5/1-2.1.5:1.1/input/input2
[ 3.970000] hid-generic 0003:0461:0010.0003: input,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-s5p-ehci-2.1.5/input1
[ 4.035000] ------------[ cut here ]------------
[ 4.035000] WARNING: at kernel/irq/manage.c:436 enable_irq+0x38/0x70()
[ 4.035000] Unbalanced enable for IRQ 212
[ 4.035000] Modules linked in:
[ 4.035000] [] (unwind_backtrace+0x0/0xf8) from [] (warn_slowpath_common+0x4c/0x64)
[ 4.035000] [] (warn_slowpath_common+0x4c/0x64) from [] (warn_slowpath_fmt+0x30/0x40)
[ 4.035000] [] (warn_slowpath_fmt+0x30/0x40) from [] (enable_irq+0x38/0x70)
[ 4.035000] [] (enable_irq+0x38/0x70) from [] (tmu_work_out+0x10/0x128)
[ 4.035000] [] (tmu_work_out+0x10/0x128) from [] (process_one_work+0x12c/0x424)
[ 4.035000] [] (process_one_work+0x12c/0x424) from [] (worker_thread+0x170/0x4b8)
[ 4.035000] [] (worker_thread+0x170/0x4b8) from [] (kthread+0x84/0x90)
[ 4.035000] [] (kthread+0x84/0x90) from [] (kernel_thread_exit+0x0/0x8)
[ 4.035000] ---[ end trace 09b9ad756b649a85 ]---
[ 4.230000] udevd[1407]: starting version 175
[ 4.505000] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro
[ 4.815000] input: gpio-keys as /devices/platform/gpio-keys.0/input/input3
[ 5.070000] max98090_set_playback_path [682] param 2
[ 5.070000] [MAX98090] max98090_set_playback_speaker_headset(111)
[ 5.070000] max98090_set_record_path [734] param 0
[ 5.070000] [MAX98090] max98090_set_record_main_mic(150)
[ 5.080000] s5p-mixer s5p-mixer: start latency exceeded, new value 1833 ns
[ 5.085000] s5p-mixer s5p-mixer: state restore latency exceeded, new value 42458 ns
[ 5.085000] s5p-mixer s5p-mixer: stop latency exceeded, new value 625 ns
[ 5.085000] s5p-mixer s5p-mixer: state save latency exceeded, new value 8250 ns
[ 5.085000] s5p-mixer s5p-mixer: stop latency exceeded, new value 1042 ns
[ 5.085000] s5p-mixer s5p-mixer: state save latency exceeded, new value 9666 ns
[ 5.295000] init: gator-daemon main process (1647) terminated with status 1
[ 5.395000] mousedev: PS/2 mouse device common for all mice
[ 5.530000] smsc95xx v1.0.4
[ 5.565000] [smsc95xx_read_mac_addr] Mac address = 56:82:CB:F6:64:AE
[ 5.615000] smsc95xx 1-2.1.1:1.0: eth0: register 'smsc95xx' at usb-s5p-ehci-2.1.1, smsc95xx USB 2.0 Ethernet, 56:82:cb:f6:64:ae
[ 5.615000] usbcore: registered new interface driver smsc95xx
[ 6.285000] NET: Registered protocol family 10
[ 6.385000] init: failsafe main process (1698) killed by TERM signal
[ 6.815000] Bluetooth: Core ver 2.16
[ 6.815000] NET: Registered protocol family 31
[ 6.815000] Bluetooth: HCI device and connection manager initialized
[ 6.815000] Bluetooth: HCI socket layer initialized
[ 6.815000] Bluetooth: L2CAP socket layer initialized
[ 6.815000] Bluetooth: SCO socket layer initialized
[ 6.890000] Bluetooth: RFCOMM TTY layer initialized
[ 6.890000] Bluetooth: RFCOMM socket layer initialized
[ 6.890000] Bluetooth: RFCOMM ver 1.11
[ 6.955000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.955000] Bluetooth: BNEP filters: protocol multicast
[ 7.475000] max98090_set_playback_path [682] param 2
[ 7.475000] [MAX98090] max98090_set_playback_speaker_headset(111)
[ 7.475000] max98090_set_record_path [734] param 0
[ 7.475000] [MAX98090] max98090_set_record_main_mic(150)
[ 7.630000] init: hybrid-gfx main process (1848) terminated with status 1
[ 7.660000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.930000] init: tty1 main process (1913) killed by TERM signal
[ 8.125000] s5p-mixer s5p-mixer: state save latency exceeded, new value 13917 ns
[ 8.565000] s5p-hdmi exynos4-hdmi: start latency exceeded, new value 875 ns
[ 8.575000] s5p-hdmiphy 8-0038: s_dv_preset(preset = 8)
[ 8.585000] s3c-i2c s3c2440-hdmiphy-i2c: timeout waiting for bus idle
[ 8.595000] plugged
[ 8.595000] s5p-hdmi exynos4-hdmi: state restore latency exceeded, new value 32072048 ns
[ 8.595000] s5p-hdmiphy 8-0038: s_stream(1)
[ 8.705000] s3c-i2c s3c2440-hdmiphy-i2c: timeout waiting for bus idle
[ 10.930000] ### max98090_dai1_hw_params###
[ 10.945000] max98090_get_playback_path [718] current playback path 2
[ 10.945000] max98090_get_record_path [759] current record path 0
[ 10.950000] ### max98090_dai1_hw_params###
[ 10.965000] max98090_get_playback_path [718] current playback path 2
[ 10.965000] max98090_get_record_path [759] current record path 0
[ 10.965000] ### max98090_dai1_hw_params###
[ 10.965000] max98090_get_playback_path [718] current playback path 2
[ 10.965000] max98090_get_record_path [759] current record path 0
[ 10.970000] ### max98090_dai1_hw_params###
[ 10.970000] ### max98090_dai1_hw_params###
[ 10.980000] ### max98090_dai1_hw_params###
[ 10.980000] max98090_get_playback_path [718] current playback path 2
[ 10.980000] max98090_get_record_path [759] current record path 0
[ 10.995000] ### max98090_dai1_hw_params###
[ 10.995000] max98090_get_playback_path [718] current playback path 2
[ 10.995000] max98090_get_record_path [759] current record path 0
[ 12.310000] warning: process `colord' used the deprecated sysctl system call with 8.1.2.
[ 16.210000] samsung-i2s samsung-i2s.0: i2s_set_sysclk:402 Other DAI busy
[ 24.770000] init: origen-bluetooth pre-start process (1839) terminated with status 1
[ 97.800000] ### max98090_dai1_hw_params###
[ 105.835000] ### max98090_dai1_hw_params###
[ 171.685000] usb 1-2.1.4: USB disconnect, device number 5
[ 172.705000] usb 1-2.1.5: USB disconnect, device number 6
[ 184.655000] unplugged
[ 192.145000] plugged
[ 195.695000] usb 1-2.1.4: new low-speed USB device number 7 using s5p-ehci
[ 195.805000] usb 1-2.1.4: New USB device found, idVendor=0461, idProduct=0010
[ 195.805000] usb 1-2.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 195.805000] usb 1-2.1.4: Product: USB Keyboard
[ 195.805000] usb 1-2.1.4: Manufacturer: NOVATEK
[ 195.815000] input: NOVATEK USB Keyboard as /devices/platform/s5p-ehci/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.0/input/input4
[ 195.815000] hid-generic 0003:0461:0010.0004: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-s5p-ehci-2.1.4/input0
[ 195.825000] input: NOVATEK USB Keyboard as /devices/platform/s5p-ehci/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.1/input/input5
[ 195.825000] hid-generic 0003:0461:0010.0005: input,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-s5p-ehci-2.1.4/input1
[ 204.910000] usb 1-2.1.5: new low-speed USB device number 8 using s5p-ehci
[ 205.015000] usb 1-2.1.5: New USB device found, idVendor=046d, idProduct=c05a
[ 205.015000] usb 1-2.1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 205.015000] usb 1-2.1.5: Product: USB Optical Mouse
[ 205.015000] usb 1-2.1.5: Manufacturer: Logitech
[ 205.025000] input: Logitech USB Optical Mouse as /devices/platform/s5p-ehci/usb1/1-2/1-2.1/1-2.1.5/1-2.1.5:1.0/input/input6
[ 205.025000] hid-generic 0003:046D:C05A.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-s5p-ehci-2.1.5/input0
[ 226.235000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 226.235000] smsc95xx 1-2.1.1:1.0: eth0: link up, 10Mbps, full-duplex, lpa 0x4C61
[ 226.335000] smsc95xx 1-2.1.1:1.0: eth0: link down
[ 227.985000] smsc95xx 1-2.1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 527.685000] ### max98090_dai1_hw_params###
[ 547.165000] ### max98090_dai1_hw_params###
[ 577.525000] ### max98090_dai1_hw_params###
[ 671.815000] ### max98090_dai1_hw_params###
[ 700.020000] ### max98090_dai1_hw_params###
[ 972.165000] ### max98090_dai1_hw_params###
[ 1123.290000] ### max98090_dai1_hw_params###
[ 1132.255000] ### max98090_dai1_hw_params###
[ 1169.665000] ### max98090_dai1_hw_params###
[ 1224.955000] ### max98090_dai1_hw_params###
[ 1274.415000] ### max98090_dai1_hw_params###
[ 1341.505000] ### max98090_dai1_hw_params###
[ 1451.575000] ### max98090_dai1_hw_params###
[ 1460.030000] ### max98090_dai1_hw_params###
[ 1511.670000] ### max98090_dai1_hw_params###
[ 1519.145000] ### max98090_dai1_hw_params###
[ 1585.945000] ### max98090_dai1_hw_params###
[ 1643.410000] ### max98090_dai1_hw_params###
[ 1701.910000] ### max98090_dai1_hw_params###
[ 2348.440000] ### max98090_dai1_hw_params###
[ 2667.035000] ### max98090_dai1_hw_params###
[ 2882.830000] ### max98090_dai1_hw_params###
[ 2898.285000] ### max98090_dai1_hw_params###
[ 2910.015000] ### max98090_dai1_hw_params###
[ 3659.700000] ### max98090_dai1_hw_params###
[ 3666.750000] ### max98090_dai1_hw_params###
[ 4096.820000] ### max98090_dai1_hw_params###
[ 4630.755000] ### max98090_dai1_hw_params###
[ 4903.995000] ### max98090_dai1_hw_params###
[ 5118.735000] ### max98090_dai1_hw_params###
[ 5320.655000] ### max98090_dai1_hw_params###
[ 5706.105000] ### max98090_dai1_hw_params###