dmesg - default
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link down (SStatus 0 SControl 310)
ata3: SATA link down (SStatus 0 SControl 310)
ata4: SATA link down (SStatus 0 SControl 310)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
devtmpfs: mounted
Freeing unused kernel memory: 476k freed
NET: Registered protocol family 1
udevd[676]: starting version 171
ioapic: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
ioapic: probe of 0000:00:0a.1 failed with error -22
ioapic: probe of 0000:00:0b.1 failed with error -22
cfg80211: Calling CRDA to update world regulatory domain
ACPI Warning: 0x0000000000009480-0x000000000000949f SystemIO conflicts with Region \_SB_.PCI0.SMBC.ECIO 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
AMD768 RNG detected
ACPI Warning: 0x00000000000010e0-0x00000000000010ef SystemIO conflicts with Region \_SB_.PCI0.PMIO 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pata_amd 0000:00:07.1: version 0.4.1
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
microcode: AMD CPU family 0xf not supported
input: PC Speaker as /devices/platform/pcspkr/input/input3
powernow-k8: Found 2 AMD Opteron(tm) Processor 246 (2 cpu cores) (version 2.20.00)
powernow-k8: fid 0xc (2000 MHz), vid 0x6
powernow-k8: fid 0xa (1800 MHz), vid 0x8
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
powernow-k8: fid 0xc (2000 MHz), vid 0x6
powernow-k8: fid 0xa (1800 MHz), vid 0x8
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
ata6.00: ATAPI: LS-120 VER4 06 UHD Floppy, 0420M414, max MWDMA2
ata6.01: ATAPI: HL-DT-STDVD-RAM GSA-H50L, 1.00, max UDMA/66
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
ata6.00: configured for MWDMA2
usbcore: registered new device driver usb
ata6.01: configured for UDMA/66
scsi 5:0:0:0: Direct-Access MATSHITA LS-120 VER4 06 0420 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] Attached SCSI removable disk
ACPI: Invalid Power Resource to register!
scsi 5:0:1:0: CD-ROM HL-DT-ST DVD-RAM GSA-H50L 1.00 PQ: 0 ANSI: 5
scsi 5:0:1:0: Attached scsi generic sg2 type 5
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:01:00.0: OHCI Host Controller
ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:01:00.0: irq 19, io mem 0xf67fd000
tg3.c:v3.124 (March 21, 2012)
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 3.6.11-gentoo ohci_hcd
usb usb1: SerialNumber: 0000:01:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
tg3 0000:02:09.0: eth0: Tigon3 [partno(BCM95703A30) rev 1002] (PCI:33MHz:64-bit) MAC address 00:e0:81:41:d3:ad
tg3 0000:02:09.0: eth0: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:02:09.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:09.0: eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
ohci_hcd 0000:01:00.1: OHCI Host Controller
ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:01:00.1: irq 19, io mem 0xf67fe000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.6.11-gentoo ohci_hcd
usb usb2: SerialNumber: 0000:01:00.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
parport_pc 00:07: reported by Plug and Play ACPI
ACPI: Invalid Power Resource to register!
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:1:0: Attached scsi CD-ROM sr0
firewire_ohci 0000:01:0c.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
usb 2-2: new low-speed USB device number 2 using ohci_hcd
usb 2-2: New USB device found, idVendor=046d, idProduct=c05a
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB Optical Mouse
usb 2-2: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:06.0/0000:01:00.1/usb2/2-2/2-2:1.0/input/input4
hid-generic 0003:046D:C05A.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:01:00.1-2/input0
firewire_core 0000:01:0c.0: created device fw0: GUID 00e081000030d91b, S400
intel8x0_measure_ac97_clock: measured 50980 usecs (2455 samples)
intel8x0: clocking to 48000
ath: EEPROM regdomain: 0x10
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: CO
ath: Regpair used: 0x10
ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90001da0000, irq=26
EXT4-fs (sda1): re-mounted. Opts: (null)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:02:09.0: wake-up capability enabled by ACPI
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
wlan0: authenticate with 84:c9:b2:0f:d5:79
wlan0: send auth to 84:c9:b2:0f:d5:79 (try 1/3)
wlan0: authenticated
wlan0: associate with 84:c9:b2:0f:d5:79 (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:0f:d5:79 (capab=0xc11 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
EXT4-fs (sda1): re-mounted. Opts: commit=0
EXT4-fs (sda3): re-mounted. Opts: commit=0
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6: lost interrupt (Status 0x58)
ata6: drained 65536 bytes to clear DRQ
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata6.00: status: { DRDY }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
cfg80211: Calling CRDA for country: CO
wlan0: authenticate with 84:c9:b2:0f:d5:79
wlan0: send auth to 84:c9:b2:0f:d5:79 (try 1/3)
wlan0: send auth to 84:c9:b2:0f:d5:79 (try 2/3)
wlan0: authenticated
wlan0: associate with 84:c9:b2:0f:d5:79 (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:0f:d5:79 (capab=0xc11 status=0 aid=3)
wlan0: associated
wlan0: deauthenticating from 84:c9:b2:0f:d5:79 by local choice (reason=3)
cfg80211: Calling CRDA for country: CA
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 84:c9:b2:0f:d5:79
wlan0: send auth to 84:c9:b2:0f:d5:79 (try 1/3)
wlan0: authenticated
wlan0: associate with 84:c9:b2:0f:d5:79 (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:0f:d5:79 (capab=0xc11 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticated from 84:c9:b2:0f:d5:79 (Reason: 2)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 84:c9:b2:0f:d5:79
wlan0: send auth to 84:c9:b2:0f:d5:79 (try 1/3)
wlan0: authenticated
wlan0: associate with 84:c9:b2:0f:d5:79 (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:0f:d5:79 (capab=0xc11 status=0 aid=3)
wlan0: associated
usb 2-1: new full-speed USB device number 3 using ohci_hcd
usb 2-1: New USB device found, idVendor=0930, idProduct=6545
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: DataTraveler G3
usb 2-1: Manufacturer: Kingston
usb 2-1: SerialNumber: 0014785ED759EB21736C0092
Initializing USB Mass Storage driver...
scsi6 : usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 6:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdc] 15622144 512-byte logical blocks: (7.99 GB/7.44 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdc] No Caching mode page present
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] No Caching mode page present
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 6:0:0:0: [sdc] No Caching mode page present
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Attached SCSI removable disk
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
ata1.00: BMDMA2 stat 0x68650001
ata1: SError: { Handshk UnrecFIS }
ata1.00: failed command: WRITE DMA EXT
ata1.00: cmd 35/00:00:88:0b:d9/00:04:08:00:00/e0 tag 0 dma 524288 out
res 51/04:00:88:0b:d9/00:04:08:00:00/e0 Emask 0x1 (device error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ABRT }
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda]
Result: hostbyte=0x00 driverbyte=0x08
sd 0:0:0:0: [sda]
Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
08 d9 0b 88
sd 0:0:0:0: [sda]
ASC=0x0 ASCQ=0x0
sd 0:0:0:0: [sda] CDB:
cdb[0]=0x2a: 2a 00 08 d9 0b 88 00 04 00 00
end_request: I/O error, dev sda, sector 148441992
ata1: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6: lost interrupt (Status 0x58)
ata6: drained 65536 bytes to clear DRQ
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x1e: 1e 00 00 00 01 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata6.00: status: { DRDY }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
sd 5:0:0:0: ioctl_internal_command return code = 8000002
: Sense Key : 0xb [current] [descriptor]
: ASC=0x0 ASCQ=0x0
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
ata6.00: qc timeout (cmd 0xa0)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x0: 00 00 00 00 00 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata6.00: status: { DRDY ERR }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
cfg80211: Calling CRDA for country: CA
wlan0: authenticate with 84:c9:b2:0f:d5:79
wlan0: send auth to 84:c9:b2:0f:d5:79 (try 1/3)
wlan0: authenticated
wlan0: associate with 84:c9:b2:0f:d5:79 (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:0f:d5:79 (capab=0xc11 status=0 aid=3)
wlan0: associated
wlan0: deauthenticating from 84:c9:b2:0f:d5:79 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 84:c9:b2:0f:d5:79
wlan0: send auth to 84:c9:b2:0f:d5:79 (try 1/3)
wlan0: authenticated
wlan0: associate with 84:c9:b2:0f:d5:79 (try 1/3)
wlan0: RX AssocResp from 84:c9:b2:0f:d5:79 (capab=0xc11 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ata6: lost interrupt (Status 0x58)
ata6: drained 65536 bytes to clear DRQ
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x1e: 1e 00 00 00 01 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata6.00: status: { DRDY }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
sd 5:0:0:0: ioctl_internal_command return code = 8000002
: Sense Key : 0xb [current] [descriptor]
: ASC=0x0 ASCQ=0x0
ata6: lost interrupt (Status 0x58)
ata6: drained 65536 bytes to clear DRQ
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sd 5:0:0:0: CDB:
cdb[0]=0x1e: 1e 00 00 00 01 00
ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata6.00: status: { DRDY }
ata6: soft resetting link
ata6.00: configured for MWDMA2
ata6.01: configured for UDMA/66
ata6: EH complete
sd 5:0:0:0: ioctl_internal_command return code = 8000002
: Sense Key : 0xb [current] [descriptor]
: ASC=0x0 ASCQ=0x0