dmesg - gcc4
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.35-30-generic (buildd@rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #54-Ubuntu SMP Tue Jun 7 18:40:23 UTC 2011 (Ubuntu 2.6.35-30.54-generic 2.6.35.13)
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cdce0000 (usable)
BIOS-e820: 00000000cdce0000 - 00000000cdce3000 (ACPI NVS)
BIOS-e820: 00000000cdce3000 - 00000000cdcf0000 (ACPI data)
BIOS-e820: 00000000cdcf0000 - 00000000cdd00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
NX (Execute Disable) protection: approximated by x86 segment limits
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0xcdce0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CBFFF write-protect
CC000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 0D0000000 mask FF0000000 uncachable
3 base 0CE000000 mask FFE000000 uncachable
4 base 0CDE00000 mask FFFE00000 uncachable
5 base 100000000 mask FC0000000 write-back
6 base 130000000 mask FF0000000 uncachable
7 base 0CDD00000 mask FFFF00000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000cdd00000 - 0000000100000000 (usable) ==> (reserved)
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (reserved)
modified: 0000000000001000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f800 (usable)
modified: 000000000009f800 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000cdce0000 (usable)
modified: 00000000cdce0000 - 00000000cdce3000 (ACPI NVS)
modified: 00000000cdce3000 - 00000000cdcf0000 (ACPI data)
modified: 00000000cdcf0000 - 00000000cdd00000 (reserved)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000fec00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000130000000 (usable)
initial memory mapped : 0 - 00c00000
found SMP MP-table at [c00f5210] f5210
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 15000-1a000
RAMDISK: 37043000 - 37ff0000
Allocated new RAMDISK: 009a9000 - 01955776
Move RAMDISK from 0000000037043000 - 0000000037fef775 to 009a9000 - 01955775
ACPI: RSDP 000f6c60 00014 (v00 GBT )
ACPI: RSDT cdce3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP cdce30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT cdce3180 04195 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS cdce0000 00040
ACPI: HPET cdce7480 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG cdce7500 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: TAMG cdce7540 06352 (v01 GBT GBT B0 5455312E BG?? 00020101)
ACPI: APIC cdce7380 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT cdcedf20 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
2404MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000cdce0
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x00000002
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000cdce0
On node 0 totalpages: 842864
free_area_init_node: node 0, pgdat c0802000, node_mem_map c1957020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3952 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 4810 pages used for memmap
HighMem zone: 610840 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [16000 - 167ff]
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at cdd00000 (gap: cdd00000:12300000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c3400000 s36416 r0 d20928 u1048576
pcpu-alloc: s36416 r0 d20928 u1048576 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 836278
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
allocated 16859500 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Subtract (53 early reservations)
#1 [0000001000 - 0000002000] EX TRAMPOLINE
#2 [0000100000 - 00009a4adc] TEXT DATA BSS
#3 [00009a5000 - 00009a80f6] BRK
#4 [00000f5220 - 0000100000] BIOS reserved
#5 [00000f5210 - 00000f5220] MP-table mpf
#6 [000009f800 - 00000f0d00] BIOS reserved
#7 [00000f0e5c - 00000f5210] BIOS reserved
#8 [00000f0d00 - 00000f0e5c] MP-table mpc
#9 [0000010000 - 0000011000] TRAMPOLINE
#10 [0000011000 - 0000015000] ACPI WAKEUP
#11 [0000015000 - 0000016000] PGTABLE
#12 [00009a9000 - 0001956000] NEW RAMDISK
#13 [0001956000 - 0001957000] BOOTMEM
#14 [0001957000 - 0003317000] BOOTMEM
#15 [0003317000 - 0003317004] BOOTMEM
#16 [0003317040 - 0003317100] BOOTMEM
#17 [0003317100 - 0003317154] BOOTMEM
#18 [0003317180 - 000331a180] BOOTMEM
#19 [000331a180 - 000331a264] BOOTMEM
#20 [000331a280 - 0003326280] BOOTMEM
#21 [0003326280 - 00033262a5] BOOTMEM
#22 [00033262c0 - 00033262e7] BOOTMEM
#23 [0003326300 - 000332646c] BOOTMEM
#24 [0003326480 - 00033264c0] BOOTMEM
#25 [00033264c0 - 0003326500] BOOTMEM
#26 [0003326500 - 0003326540] BOOTMEM
#27 [0003326540 - 0003326580] BOOTMEM
#28 [0003326580 - 00033265c0] BOOTMEM
#29 [00033265c0 - 0003326600] BOOTMEM
#30 [0003326600 - 0003326640] BOOTMEM
#31 [0003326640 - 0003326680] BOOTMEM
#32 [0003326680 - 00033266c0] BOOTMEM
#33 [00033266c0 - 0003326700] BOOTMEM
#34 [0003326700 - 0003326710] BOOTMEM
#35 [0003326740 - 0003326750] BOOTMEM
#36 [0003326780 - 00033267f1] BOOTMEM
#37 [0003326800 - 0003326871] BOOTMEM
#38 [0003400000 - 000340e000] BOOTMEM
#39 [0003500000 - 000350e000] BOOTMEM
#40 [0003600000 - 000360e000] BOOTMEM
#41 [0003700000 - 000370e000] BOOTMEM
#42 [0003328880 - 0003328884] BOOTMEM
#43 [00033288c0 - 00033288c4] BOOTMEM
#44 [0003328900 - 0003328910] BOOTMEM
#45 [0003328940 - 0003328950] BOOTMEM
#46 [0003328980 - 0003328a20] BOOTMEM
#47 [0003328a40 - 0003328a88] BOOTMEM
#48 [0003328ac0 - 000332cac0] BOOTMEM
#49 [000332cac0 - 00033acac0] BOOTMEM
#50 [00033acac0 - 00033ecac0] BOOTMEM
#51 [0003326880 - 0003326ac0] BOOTMEM
#52 [000370e000 - 000472216c] BOOTMEM
Initializing HighMem for node 0 (000377fe:000cdce0)
Memory: 3302592k/3371904k available (4941k kernel code, 68864k reserved, 2332k data, 688k init, 2462600k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc081b000 - 0xc08c7000 ( 688 kB)
.data : 0xc05d344e - 0xc081a7e8 (2332 kB)
.text : 0xc0100000 - 0xc05d344e (4941 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304 nr_irqs:712
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: using HPET reference calibration
Detected 3066.619 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6133.23 BogoMIPS (lpj=12266476)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100428
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21775 entries in 43 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel Pentium(R) Dual-Core CPU E6600 @ 3.06GHz stepping 0a
Booting Node 0, Processors #1
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (12266.46 BogoMIPS).
devtmpfs: initialized
regulator: core version 0.5
Time: 8:31:11 Date: 12/21/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning: Incorrect checksum in table [TAMG] - 0x0D, should be 0x0C (20100428/tbutils-314)
ACPI: SSDT cdced900 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
ACPI: SSDT cdceddc0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xcdd00000-0xfebfffff]
pci 0000:00:02.0: reg 10: [mem 0xfd800000-0xfdbfffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0xff00-0xff07]
pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xfe00-0xfe1f]
pci 0000:00:1d.1: reg 20: [io 0xfd00-0xfd1f]
pci 0000:00:1d.2: reg 20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.3: reg 20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 20: [io 0xf800-0xf80f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xfdec0000-0xfdefffff 64bit]
pci 0000:02:00.0: reg 18: [io 0xdf00-0xdf7f]
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 02-02]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xcdd00000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
HEST: Table is not found!
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 0000000000002000 - 000000000000ffff
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 00000000cdce0000 - 00000000cfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0290-0x0294] has been reserved
system 00:01: [io 0x0880-0x088f] has been reserved
system 00:0a: [io 0x0400-0x047f] has been reserved
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: [mem 0x000cc800-0x000cffff] has been reserved
system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0c: [mem 0xcdce0000-0xcdceffff] could not be reserved
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x00100000-0xcdcdffff] could not be reserved
system 00:0c: [mem 0xcdcf0000-0xcdcfffff] has been reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfed13000-0xfed1dfff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
pci 0000:00:1c.0: BAR 14: assigned [mem 0xcdd00000-0xcdefffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xcdf00000-0xce0fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xce100000-0xce2fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xcdd00000-0xcdefffff]
pci 0000:00:1c.0: bridge window [mem 0xcdf00000-0xce0fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 02-02]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.2: bridge window [mem 0xce100000-0xce2fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: enabling device (0000 -> 0003)
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcdd00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xcdd00000-0xcdefffff]
pci_bus 0000:01: resource 2 [mem 0xcdf00000-0xce0fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:02: resource 2 [mem 0xce100000-0xce2fffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xcdd00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 4 bytes, default 64
cpufreq-nforce2: No nForce2 chipset.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1356078670.768:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.14)
msgmni has been set to 1640
Freeing initrd memory: 16052k freed
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x22220
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ERST: Table is not found!
isapnp: Scanning for PnP cards...
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ IDE IDE P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.1.1 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 8:938:523
rtc_cmos 00:04: setting system clock to 2012-12-21 08:31:12 UTC (1356078672)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
isapnp: No Plug & Play device found
ata2.01: ATA-8: ST500DM002-1BD142, KC43, max UDMA/133
ata2.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: configured for UDMA/133
scsi 1:0:1:0: Direct-Access ATA ST500DM002-1BD14 KC43 PQ: 0 ANSI: 5
sd 1:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:1:0: [sda] 4096-byte physical blocks
sd 1:0:1:0: Attached scsi generic sg0 type 0
sd 1:0:1:0: [sda] Write Protect is off
sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6
usb 4-1: new low speed USB device using uhci_hcd and address 2
sda7 >
sd 1:0:1:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 688k freed
Write protecting the kernel text: 4944k
Write protecting the kernel read-only data: 1976k
ramzswap: module is from the staging directory, the quality is unknown, you have been warned.
ramzswap: num_devices not specified. Using default: 1
ramzswap: Creating 1 devices ...
udev[86]: starting version 163
Linux agpgart interface v0.103
atl1c 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
atl1c 0000:02:00.0: setting latency timer to 64
agpgart-intel 0000:00:00.0: Intel G41 Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Floppy drive(s): fd0 is unknown type 13 (usb?)
FDC 0 is a post-1991 82077
atl1c 0000:02:00.0: version 1.0.0.2-NAPI
[drm] Initialized drm 1.1.0 20060810
usbcore: registered new interface driver hiddev
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input2
generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.2-1/input0
mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[drm] MTRR allocation failed. Graphics performance may suffer.
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
i915 0000:00:02.0: irq 42 for MSI/MSI-X
[drm] set up 31M of stolen space
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input3
generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.2-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 5-2: new low speed USB device using uhci_hcd and address 2
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input4
generic-usb 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.3-2/input0
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 11711.000 MB/sec
xor: using function: pIII_sse (11711.000 MB/sec)
device-mapper: dm-raid45: initialized v0.2594b
PM: Marking nosave pages: 0000000000002000 - 0000000000010000
PM: Marking nosave pages: 000000000009f000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
udev[376]: starting version 163
intel_rng: FWH not detected
leds_ss4200: no LED devices found
udev[398]: renamed network interface eth0 to eth1
lp: driver loaded but no devices found
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
lp0: using parport0 (interrupt-driven).
type=1400 audit(1356058888.802:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=660 comm="apparmor_parser"
type=1400 audit(1356058888.802:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=687 comm="apparmor_parser"
type=1400 audit(1356058888.802:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=660 comm="apparmor_parser"
type=1400 audit(1356058888.802:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=687 comm="apparmor_parser"
type=1400 audit(1356058888.802:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=660 comm="apparmor_parser"
type=1400 audit(1356058888.802:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=687 comm="apparmor_parser"
EXT4-fs (sda6): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
type=1400 audit(1356058910.318:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=907 comm="apparmor_parser"
type=1400 audit(1356058910.318:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=907 comm="apparmor_parser"
type=1400 audit(1356058910.342:10): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=932 comm="apparmor_parser"
type=1400 audit(1356058910.342:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=933 comm="apparmor_parser"
type=1400 audit(1356058910.342:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=933 comm="apparmor_parser"
type=1400 audit(1356058910.342:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=933 comm="apparmor_parser"
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
atl1c 0000:02:00.0: irq 44 for MSI/MSI-X
atl1c 0000:02:00.0: atl1c: eth1 NIC Link is Up
type=1400 audit(1356058910.354:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=935 comm="apparmor_parser"
type=1400 audit(1356058910.358:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1002 comm="apparmor_parser"
type=1400 audit(1356058910.358:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1002 comm="apparmor_parser"
type=1400 audit(1356058910.362:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=935 comm="apparmor_parser"
eth1: no IPv6 routers present
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
vboxdrv: counter framework which can generate NMIs is active. You have to prevent
vboxdrv: the usage of hardware performance counters by
vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x1cc offMax=0x213e
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.2.8_OSE (interface 0x00140001).