dmesg - loongson-8131-loonux-smallpt
7343] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6018 irq 15
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
r8168 Gigabit Ethernet driver 8.031.00 loaded
PCI: Setting latency timer of device 0000:02:00.0 to 64
r8168 0000:02:00.0: no MSI. Back to INTx.
eth%d: RTL8168D/8111D at 0x9000000048100000, 00:23:9e:02:cf:7e, IRQ 3
r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
eth0: Identified chip type is 'RTL8168D/8111D'.
r8168 Copyright (C) 2012 Realtek NIC software team
This program comes with ABSOLUTELY NO WARRANTY; for details, please see .
This is free software, and you are welcome to redistribute it under certain conditions; see .
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
PCI: Enabling device 0000:00:12.2 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:12.2 to 64
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 6, io mem 0x48409400
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
PCI: Enabling device 0000:00:13.2 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:13.2 to 64
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 6, io mem 0x48409500
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
PCI: Enabling device 0000:00:12.0 (0140 -> 0142)
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 6, io mem 0x48404000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 6, io mem 0x48405000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
PCI: Enabling device 0000:00:13.0 (0140 -> 0142)
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 6, io mem 0x48406000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
PCI: Enabling device 0000:00:13.1 (0140 -> 0142)
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 6, io mem 0x48407000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
PCI: Enabling device 0000:00:14.5 (0140 -> 0142)
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 6, io mem 0x48408000
usb 1-4: new high speed USB device using ehci_hcd and address 2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
logibm.c: Didn't find Logitech busmouse at 0x23c
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
atkbd serio3: keyboard reset failed on isa0060/serio3
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x1000, revision 0
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Lemote Laptop Support version 1.11
atkbd serio4: keyboard reset failed on isa0060/serio4
Lemote Battery Information:
ManufacturerName: SCUD, DeviceName: 3A-NB, DeviceChemistry: Lion
SerialNumber: c459, ManufactureDate: 2012-3-17, CellNumber: 3
DesignCapacity: 4300mAh, DesignVoltage: 11100mV, FullChargeCapacity: 4013mAh
input: Lemote Laptop Hotkeys as /devices/virtual/input/input0
Lemote Laptop Platform Driver: PCI Init successful!
Lemote Laptop Platform Driver: SCI event handler init.
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP htcp registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Loongson Hwmon Enter...
success to attach EMC1412 sensor
cpuautoplug: Loongson-3A CPU autoplug driver.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
registered taskstats version 1
rtc_cmos rtc_cmos: setting system clock to 2012-12-20 00:25:33 UTC (1355963133)
atkbd serio1: keyboard reset failed on isa0060/serio1
usb 1-5: new high speed USB device using ehci_hcd and address 3
scsi6 : usb-storage 1-5:1.0
atkbd serio3: keyboard reset failed on isa0060/serio3
atkbd serio4: keyboard reset failed on isa0060/serio4
Finger Sensing Pad, hw: 12.1.1, sw: 1.0.0-K, buttons: 4
scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio2/input/input2
EXT3-fs (sda5): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda5): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
devtmpfs: mounted
Freeing unused kernel memory: 256k freed
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f76a8) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f773c) on /dev/tty7
systemd[1]: systemd 29 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +SYSVINIT +LIBCRYPTSETUP; debian)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
systemd[1]: Set hostname to .
systemd[1]: [/etc/init.d/rc.local:3] Failed to add LSB Provides name rc-local.service, ignoring: File exists
systemd[1]: Cannot add dependency job for unit hwclock-load.service, ignoring: Unit hwclock-load.service failed to load: No such file or directory. See system logs and 'systemctl status' for details.
systemd[1]: Cannot add dependency job for unit ssh.service, ignoring: Unit ssh.service is masked.
modprobe[706]: WARNING: Module fuse not found.
systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1
udevd[771]: starting version 171
systemd[1]: Unit systemd-modules-load.service entered failed state.
systemd-vconsole-setup[768]: /bin/loadkeys failed with error code 1.
systemd-vconsole-setup[768]: cannot open file us
systemd-vconsole-setup[768]: Cannot open font file default8x16
systemd-vconsole-setup[768]: /bin/setfont failed with error code 66.
systemd-fsck[767]: /dev/sda5: clean, 132914/1313280 files, 1255529/5242880 blocks
EXT4-fs (sda5): re-mounted. Opts: (null)
cfg80211: Calling CRDA to update world regulatory domain
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB2.0-Camera (0bda:5801)
input: USB2.0-Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input3
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78e0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7974) on /dev/tty7
PCI: Setting latency timer of device 0000:04:00.0 to 64
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
phy0: Atheros AR9285 Rev:2 mem=0x9000000048300000, irq=6
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
Adding 2104496k swap on /dev/sda3. Priority:0 extents:1 across:2104496k
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548c){t:'T';sz:0} arg(7f9f78a0) on /dev/tty7
ioctl32(plymouthd:685): Unknown cmd fd(10) cmd(0000548b){t:'T';sz:0} arg(7f9f7934) on /dev/tty7
alsactl[1355]: Found hardware: "HDA-Intel" "Conexant CX20590" "HDA:14f1506e,14f10101,00100002" "0x1c06" "0x2011"
alsactl[1355]: Hardware is initialized using a generic method
avahi-daemon[1360]: Found user 'avahi' (UID 107) and group 'avahi' (GID 113).
avahi-daemon[1360]: Successfully dropped root privileges.
avahi-daemon[1360]: avahi-daemon 0.6.31 starting up.
alsactl[1355]: /sbin/alsactl: set_control:1328: failed to obtain info for control #6 (No such file or directory)
alsactl[1355]: /sbin/alsactl: set_control:1328: failed to obtain info for control #7 (No such file or directory)
alsactl[1355]: /sbin/alsactl: set_control:1328: failed to obtain info for control #8 (No such file or directory)
alsactl[1355]: /sbin/alsactl: set_control:1328: failed to obtain info for control #9 (No such file or directory)
alsactl[1355]: /sbin/alsactl: set_control:1328: failed to obtain info for control #10 (No such file or directory)
alsactl[1355]: /sbin/alsactl: set_control:1464: Cannot write control '2:0:0:PCM Playback Volume:0' : Operation not permitted
/usr/sbin/cron[1371]: (CRON) INFO (pidfile fd = 3)
/usr/sbin/cron[1371]: (CRON) INFO (Running @reboot jobs)
systemd[1]: atd.service: main process exited, code=exited, status=203
systemd[1]: Unit atd.service entered failed state.
ntpd[1397]: ntpd 4.2.6p2@1.2194-o Sun Oct 17 20:12:21 UTC 2010 (1)
ntpd[1413]: proto: precision = 1.956 usec
avahi-daemon[1360]: Successfully dropped remaining capabilities.
r8168: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8168: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
r8168: eth0: link up
Disable clock for CPU3
Disable clock for CPU2
eth0: no IPv6 routers present
Disable clock for CPU1
BOOT CPU#1...
CPU 1, fn=ffffffff80213acc, sp=980000017f0cfeb0, gp=980000017f0cc000
CPU revision is: 00006305 (ICT Loongson-3)
FPU revision is: 00770501
c0_config1 = fffffffffee37193
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
c0_config2 = ffffffff80001743
Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0.
CPU#1 call init_secondary!!!!
CPU#1 done init_secondary en=ffffffff!!!!
loongson3_smp_finish, CPU#1 CP0_ST=1400cce1
BOOT CPU#2...
CPU 2, fn=ffffffff80213acc, sp=980000017f0e3eb0, gp=980000017f0e0000
CPU revision is: 00006305 (ICT Loongson-3)
FPU revision is: 00770501
c0_config1 = fffffffffee37193
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
c0_config2 = ffffffff80001743
Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0.
CPU#2 call init_secondary!!!!
CPU#2 done init_secondary en=ffffffff!!!!
loongson3_smp_finish, CPU#2 CP0_ST=1400cce1
BOOT CPU#3...
CPU 3, fn=ffffffff80213acc, sp=980000017f0f7eb0, gp=980000017f0f4000
CPU revision is: 00006305 (ICT Loongson-3)
FPU revision is: 00770501
c0_config1 = fffffffffee37193
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
c0_config2 = ffffffff80001743
Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0.
CPU#3 call init_secondary!!!!
CPU#3 done init_secondary en=ffffffff!!!!
loongson3_smp_finish, CPU#3 CP0_ST=1400cce1
Disable clock for CPU3
Disable clock for CPU2
Disable clock for CPU1
BOOT CPU#1...
CPU 1, fn=ffffffff80213acc, sp=980000017f0cfeb0, gp=980000017f0cc000
CPU revision is: 00006305 (ICT Loongson-3)
FPU revision is: 00770501
c0_config1 = fffffffffee37193
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
c0_config2 = ffffffff80001743
Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0.
CPU#1 call init_secondary!!!!
CPU#1 done init_secondary en=ffffffff!!!!
loongson3_smp_finish, CPU#1 CP0_ST=1400cce1
Disable clock for CPU1
BOOT CPU#1...
CPU 1, fn=ffffffff80213acc, sp=980000017f0cfeb0, gp=980000017f0cc000
CPU revision is: 00006305 (ICT Loongson-3)
FPU revision is: 00770501
c0_config1 = fffffffffee37193
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
c0_config2 = ffffffff80001743
Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0.
CPU#1 call init_secondary!!!!
CPU#1 done init_secondary en=ffffffff!!!!
loongson3_smp_finish, CPU#1 CP0_ST=1400cce1
Disable clock for CPU1
BOOT CPU#1...
CPU 1, fn=ffffffff80213acc, sp=980000017f0cfeb0, gp=980000017f0cc000
CPU revision is: 00006305 (ICT Loongson-3)
FPU revision is: 00770501
c0_config1 = fffffffffee37193
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
c0_config2 = ffffffff80001743
Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0.
CPU#1 call init_secondary!!!!
CPU#1 done init_secondary en=ffffffff!!!!
loongson3_smp_finish, CPU#1 CP0_ST=1400cce1
Disable clock for CPU1
BOOT CPU#1...
CPU 1, fn=ffffffff80213acc, sp=980000017f0cfeb0, gp=980000017f0cc000
CPU revision is: 00006305 (ICT Loongson-3)
FPU revision is: 00770501
c0_config1 = fffffffffee37193
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
c0_config2 = ffffffff80001743
Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0.
CPU#1 call init_secondary!!!!
CPU#1 done init_secondary en=ffffffff!!!!
loongson3_smp_finish, CPU#1 CP0_ST=1400cce1
Disable clock for CPU1
BOOT CPU#1...
CPU 1, fn=ffffffff80213acc, sp=980000017f0cfeb0, gp=980000017f0cc000
CPU revision is: 00006305 (ICT Loongson-3)
FPU revision is: 00770501
c0_config1 = fffffffffee37193
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
c0_config2 = ffffffff80001743
Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0.
CPU#1 call init_secondary!!!!
CPU#1 done init_secondary en=ffffffff!!!!
loongson3_smp_finish, CPU#1 CP0_ST=1400cce1
Disable clock for CPU1
ADDRCONF(NETDEV_UP): wlan0: link is not ready
BOOT CPU#1...
CPU 1, fn=ffffffff80213acc, sp=980000017f0cfeb0, gp=980000017f0cc000
CPU revision is: 00006305 (ICT Loongson-3)
FPU revision is: 00770501
c0_config1 = fffffffffee37193
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
c0_config2 = ffffffff80001743
Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0.
CPU#1 call init_secondary!!!!
CPU#1 done init_secondary en=ffffffff!!!!
loongson3_smp_finish, CPU#1 CP0_ST=1400cce1
Disable clock for CPU1
BOOT CPU#1...
CPU 1, fn=ffffffff80213acc, sp=980000017f0cfeb0, gp=980000017f0cc000
CPU revision is: 00006305 (ICT Loongson-3)
FPU revision is: 00770501
c0_config1 = fffffffffee37193
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
c0_config2 = ffffffff80001743
Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0.
CPU#1 call init_secondary!!!!
CPU#1 done init_secondary en=ffffffff!!!!
loongson3_smp_finish, CPU#1 CP0_ST=1400cce1
Disable clock for CPU1
BOOT CPU#1...
CPU 1, fn=ffffffff80213acc, sp=980000017f0cfeb0, gp=980000017f0cc000
CPU revision is: 00006305 (ICT Loongson-3)
FPU revision is: 00770501
c0_config1 = fffffffffee37193
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
c0_config2 = ffffffff80001743
Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0.
CPU#1 call init_secondary!!!!
CPU#1 done init_secondary en=ffffffff!!!!
loongson3_smp_finish, CPU#1 CP0_ST=1400cce1
Disable clock for CPU1
BOOT CPU#1...
CPU 1, fn=ffffffff80213acc, sp=980000017f0cfeb0, gp=980000017f0cc000
CPU revision is: 00006305 (ICT Loongson-3)
FPU revision is: 00770501
c0_config1 = fffffffffee37193
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
c0_config2 = ffffffff80001743
Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0.
CPU#1 call init_secondary!!!!
CPU#1 done init_secondary en=ffffffff!!!!
loongson3_smp_finish, CPU#1 CP0_ST=1400cce1
Disable clock for CPU1
BOOT CPU#1...
CPU 1, fn=ffffffff80213acc, sp=980000017f0cfeb0, gp=980000017f0cc000
CPU revision is: 00006305 (ICT Loongson-3)
FPU revision is: 00770501
c0_config1 = fffffffffee37193
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
c0_config2 = ffffffff80001743
Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0.
CPU#1 call init_secondary!!!!
CPU#1 done init_secondary en=ffffffff!!!!
loongson3_smp_finish, CPU#1 CP0_ST=1400cce1
BOOT CPU#2...
CPU 2, fn=ffffffff80213acc, sp=980000017f0e3eb0, gp=980000017f0e0000
CPU revision is: 00006305 (ICT Loongson-3)
FPU revision is: 00770501
c0_config1 = fffffffffee37193
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
c0_config2 = ffffffff80001743
Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0.
CPU#2 call init_secondary!!!!
CPU#2 done init_secondary en=ffffffff!!!!
loongson3_smp_finish, CPU#2 CP0_ST=1400cce1
Disable clock for CPU2
Disable clock for CPU1
BOOT CPU#1...
CPU 1, fn=ffffffff80213acc, sp=980000017f0cfeb0, gp=980000017f0cc000
CPU revision is: 00006305 (ICT Loongson-3)
FPU revision is: 00770501
c0_config1 = fffffffffee37193
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
c0_config2 = ffffffff80001743
Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0.
CPU#1 call init_secondary!!!!
CPU#1 done init_secondary en=ffffffff!!!!
loongson3_smp_finish, CPU#1 CP0_ST=1400cce1
BOOT CPU#2...
CPU 2, fn=ffffffff80213acc, sp=980000017f0e3eb0, gp=980000017f0e0000
CPU revision is: 00006305 (ICT Loongson-3)
FPU revision is: 00770501
c0_config1 = fffffffffee37193
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
c0_config2 = ffffffff80001743
Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0.
CPU#2 call init_secondary!!!!
CPU#2 done init_secondary en=ffffffff!!!!
loongson3_smp_finish, CPU#2 CP0_ST=1400cce1
Disable clock for CPU2