dmesg - Gogo
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-35-generic-pae (buildd@aatxe) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #55-Ubuntu SMP Wed Dec 5 18:04:39 UTC 2012 (Ubuntu 3.2.0-35.55-generic-pae 3.2.34)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
BIOS-e820: 00000000cfe90000 - 00000000cfee3000 (ACPI NVS)
BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
NX (Execute Disable) protection: active
DMI 2.5 present.
DMI: Dell Inc. Inspiron 530/0FM586, BIOS 1.0.13 03/20/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x130000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CEFFF write-protect
CF000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 100000000 mask FE0000000 write-back
1 base 120000000 mask FF0000000 write-back
2 base 000000000 mask F80000000 write-back
3 base 080000000 mask FC0000000 write-back
4 base 0C0000000 mask FF0000000 write-back
5 base 0CFF00000 mask FFFF00000 uncachable
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 4GB, range: 512MB, type WB
reg 1, base: 4608MB, range: 256MB, type WB
reg 2, base: 0GB, range: 2GB, type WB
reg 3, base: 2GB, range: 1GB, type WB
reg 4, base: 3GB, range: 256MB, type WB
reg 5, base: 3327MB, range: 1MB, type UC
total RAM covered: 4095M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3327MB, range: 1MB, type UC
reg 4, base: 4GB, range: 512MB, type WB
reg 5, base: 4608MB, range: 256MB, type WB
e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
found SMP MP-table at [c00f3f00] f3f00
initial memory mapped : 0 - 02000000
Base memory trampoline at [c009a000] 9a000 size 16384
init_memory_mapping: 0000000000000000-0000000037bfe000
0000000000 - 0000200000 page 4k
0000200000 - 0037a00000 page 2M
0037a00000 - 0037bfe000 page 4k
kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
RAMDISK: 358ce000 - 36c5f000
ACPI: RSDP 000f97a0 00024 (v02 DELL )
ACPI: XSDT cfee3080 0005C (v01 DELL FX09 42302E31 AWRD 00000000)
ACPI: FACP cfee7200 000F4 (v03 DELL FX09 42302E31 AWRD 00000000)
ACPI: DSDT cfee3200 03FFC (v01 DELL AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS cfe90000 00040
ACPI: HPET cfee73c0 00038 (v01 DELL FX09 42302E31 AWRD 00000098)
ACPI: MCFG cfee7400 0003C (v01 DELL FX09 42302E31 AWRD 00000000)
ACPI: SLIC cfee7440 00176 (v01 DELL FX09 42302E31 AWRD 00000000)
ACPI: DMY2 cfee75c0 00080 (v01 DELL FX09 42302E31 AWRD 00000000)
ACPI: APIC cfee7300 00084 (v01 DELL FX09 42302E31 AWRD 00000000)
ACPI: SSDT cfee7f60 00380 (v01 PmRef CpuPm 00003000 INTL 20041203)
ACPI: Local APIC address 0xfee00000
3972MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00037bfe
HighMem 0x00037bfe -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000cfe90
0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1048094
free_area_init_node: node 0, pgdat c186b1c0, node_mem_map f32ce200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3950 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 7945 pages used for memmap
HighMem zone: 811913 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bb3000 s34240 r0 d23104 u57344
pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038365
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 19922688 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00130000)
Memory: 4102492k/4980736k available (5825k kernel code, 89884k reserved, 2849k data, 744k init, 3279432k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1879000 - 0xc1933000 ( 744 kB)
.data : 0xc15b05bc - 0xc1878a00 (2849 kB)
.text : 0xc1000000 - 0xc15b05bc (5825 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f740a000 soft=f740c000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2493.941 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.88 BogoMIPS (lpj=9975764)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20110623
ftrace: allocating 26576 entries in 53 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
CPU 1 irqstacks, hard=f74f2000 soft=f74f4000
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9a000
Initializing CPU#1
NMI watchdog enabled, takes one hw-pmu counter.
CPU 2 irqstacks, hard=f7520000 soft=f7522000
#2
smpboot cpu 2: start_ip = 9a000
Initializing CPU#2
NMI watchdog enabled, takes one hw-pmu counter.
CPU 3 irqstacks, hard=f752e000 soft=f7538000
#3 Ok.
smpboot cpu 3: start_ip = 9a000
Initializing CPU#3
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (19950.37 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at cfe90000 (339968 bytes)
print_constraints: dummy:
RTC time: 9:59:00, date: 12/16/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: SSDT cfee7680 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
ACPI: SSDT cfee7b40 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
ACPI: SSDT cfee7ca0 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20041203)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20041203)
ACPI: SSDT cfee7e00 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20041203)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20041203)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xcff00000-0xfebfffff]
pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:19.0: [8086:10c0] type 0 class 0x000200
pci 0000:00:19.0: reg 10: [mem 0xfdfc0000-0xfdfdffff]
pci 0000:00:19.0: reg 14: [mem 0xfdfff000-0xfdffffff]
pci 0000:00:19.0: reg 18: [io 0xff00-0xff1f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0xfd00-0xfd1f]
pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
pci 0000:00:1a.2: reg 20: [io 0xfc00-0xfc1f]
pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0xfa00-0xfa1f]
pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0xf900-0xf91f]
pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfdffd000-0xfdffd3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f)
pci 0000:00:1f.2: [8086:2920] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io 0xf800-0xf807]
pci 0000:00:1f.2: reg 14: [io 0xf700-0xf703]
pci 0000:00:1f.2: reg 18: [io 0xf600-0xf607]
pci 0000:00:1f.2: reg 1c: [io 0xf500-0xf503]
pci 0000:00:1f.2: reg 20: [io 0xf400-0xf40f]
pci 0000:00:1f.2: reg 24: [io 0xf300-0xf30f]
pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfdffc000-0xfdffc0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
pci 0000:00:1f.5: reg 10: [io 0xf100-0xf107]
pci 0000:00:1f.5: reg 14: [io 0xf000-0xf003]
pci 0000:00:1f.5: reg 18: [io 0xef00-0xef07]
pci 0000:00:1f.5: reg 1c: [io 0xee00-0xee03]
pci 0000:00:1f.5: reg 20: [io 0xed00-0xed0f]
pci 0000:00:1f.5: reg 24: [io 0xec00-0xec0f]
pci 0000:01:00.0: [1002:9588] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfdce0000-0xfdceffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xae00-0xaeff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa08] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci 0000:03:00.0: [18c3:0720] type 0 class 0x000400
pci 0000:03:00.0: reg 10: [mem 0xfdef0000-0xfdefffff]
pci 0000:03:00.0: reg 14: [mem 0xfdee0000-0xfdeeffff 64bit]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:1e.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 *4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009e800 - 000000000009ffff
reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xcff00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0022-0x003f]
pnp 00:01: [io 0x0044-0x005f]
pnp 00:01: [io 0x0060]
pnp 00:01: [io 0x0064]
pnp 00:01: [io 0x0062-0x0063]
pnp 00:01: [io 0x0065-0x006f]
pnp 00:01: [io 0x0074-0x007f]
pnp 00:01: [io 0x0091-0x0093]
pnp 00:01: [io 0x00a2-0x00bf]
pnp 00:01: [io 0x00e0-0x00ef]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0800-0x087f]
pnp 00:01: [io 0x0290-0x0297]
pnp 00:01: [io 0x0880-0x088f]
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0290-0x0297] has been reserved
system 00:01: [io 0x0880-0x088f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x0090]
pnp 00:02: [io 0x0094-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [irq 0 disabled]
pnp 00:03: [irq 8]
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x0070-0x0073]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x03f0-0x03f5]
pnp 00:07: [io 0x03f7]
pnp 00:07: [irq 6]
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: [io 0x0400-0x04bf]
system 00:08: [io 0x0400-0x04bf] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xffb80000-0xffbfffff]
pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0a: [mem 0xe0000000-0xefffffff]
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x000f0000-0x000fffff]
pnp 00:0b: [mem 0xcff00000-0xcfffffff]
pnp 00:0b: [mem 0xfed00000-0xfed000ff]
pnp 00:0b: [mem 0xcfe90000-0xcfefffff]
pnp 00:0b: [mem 0x00000000-0x0009ffff]
pnp 00:0b: [mem 0x00100000-0xcfe8ffff]
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfed14000-0xfed1dfff]
pnp 00:0b: [mem 0xfed20000-0xfed9ffff]
pnp 00:0b: [mem 0xfee00000-0xfee00fff]
pnp 00:0b: [mem 0xffb00000-0xffb7ffff]
pnp 00:0b: [mem 0xfff00000-0xffffffff]
pnp 00:0b: [mem 0x000e0000-0x000effff]
system 00:0b: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:0b: [mem 0xcff00000-0xcfffffff] has been reserved
system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved
system 00:0b: [mem 0xcfe90000-0xcfefffff] could not be reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x00100000-0xcfe8ffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfed14000-0xfed1dfff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed9ffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:01:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04-04]
pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:1e.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfd900000-0xfd9fffff]
pci_bus 0000:02: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xcff00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1a.1: PCI INT B disabled
pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1a.2: PCI INT D disabled
pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1a.7: PCI INT C disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1355651939.424:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 1607
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x20
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
ERST: Table is not found!
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Freeing initrd memory: 20036k freed
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19
ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 8:634:980
rtc_cmos 00:04: setting system clock to 2012-12-16 09:59:00 UTC (1355651940)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: SAMSUNG HD403LJ, CT100-11, max UDMA7
ata4.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
usb 5-1: new low-speed USB device number 2 using uhci_hcd
Refined TSC clocksource calibration: 2493.749 MHz.
Switching to clocksource tsc
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: WDC WD6400AAKS-75A7B0, 01.03B01, max UDMA/133
ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD6400AAKS-7 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD403LJ CT10 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 781422768 512-byte logical blocks: (400 GB/372 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: Attached scsi generic sg1 type 0
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 744k freed
Write protecting the kernel text: 5828k
Write protecting the kernel read-only data: 2380k
NX-protecting the kernel data: 4412k
udevd[103]: starting version 175
[drm] Initialized drm 1.1.0 20060810
e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
usb 5-2: new low-speed USB device number 3 using uhci_hcd
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:01:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV630 0x1002:0x9588 0x1028:0x2542).
[drm] register mmio base: 0xFDCE0000
[drm] register mmio size: 65536
ATOM BIOS: 113
radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 421920 kiB.
[TTM] Zone highmem: Available graphics memory: 2061636 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 44 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV630 Microcode
input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input2
generic-usb 0003:045E:0750.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1a.2-1/input0
FDC 0 is a post-1991 82077
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input3
generic-usb 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1a.2-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DIN
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] DFP1: INTERNAL_KLDSCP_TMDS1
[drm] Connector 2:
[drm] DVI-I
[drm] HPD2
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP2: INTERNAL_LVTM1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1d:09:82:97:98
e1000e 0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 7, PBA No: FFFFFF-0FF
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input4
generic-usb 0003:0461:4D22.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.2-2/input0
EXT4-fs (sda5): INFO: recovery required on readonly filesystem
EXT4-fs (sda5): write access will be enabled during recovery
EXT4-fs (sda5): recovery complete
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[574]: starting version 175
type=1400 audit(1355651957.947:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=763 comm="apparmor_parser"
type=1400 audit(1355651957.947:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=763 comm="apparmor_parser"
type=1400 audit(1355651957.947:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=763 comm="apparmor_parser"
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1355651959.887:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=824 comm="apparmor_parser"
type=1400 audit(1355651959.887:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=824 comm="apparmor_parser"
init: failsafe main process (787) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: setting latency timer to 64
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input5
it87: Found IT8718F chip at 0x290, revision 3
ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region IP__ [io 0x295-0x296]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
it87: Found IT8718F chip at 0x290, revision 3
ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region IP__ [io 0x295-0x296]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
type=1400 audit(1355651962.619:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=975 comm="apparmor_parser"
type=1400 audit(1355651962.619:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=975 comm="apparmor_parser"
type=1400 audit(1355651962.619:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=975 comm="apparmor_parser"
type=1400 audit(1355651962.771:10): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=973 comm="apparmor_parser"
type=1400 audit(1355651962.771:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=980 comm="apparmor_parser"
audit_printk_skb: 18 callbacks suppressed
type=1400 audit(1355651962.975:18): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=983 comm="apparmor_parser"
type=1400 audit(1355651964.731:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=976 comm="apparmor_parser"
type=1400 audit(1355651964.739:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=976 comm="apparmor_parser"
type=1400 audit(1355651964.739:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=976 comm="apparmor_parser"
type=1400 audit(1355651964.739:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=976 comm="apparmor_parser"
type=1400 audit(1355651964.743:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=976 comm="apparmor_parser"
type=1400 audit(1355651964.743:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=976 comm="apparmor_parser"
type=1400 audit(1355651964.743:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=976 comm="apparmor_parser"
type=1400 audit(1355651964.747:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=976 comm="apparmor_parser"
NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
DECnet: Routing cache hash table of 1024 buckets, 8Kbytes
NET: Registered protocol family 12
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: lightdm main process (1144) killed by TERM signal
init: kdm main process (1120) killed by TERM signal
init: plymouth-stop pre-start process (1642) terminated with status 1
eth0: no IPv6 routers present